flashrom

flashrom@flashrom.org

3 participants
9188 discussions

Re: [flashrom] [coreboot] utililty output for Gigabyte EG45M-UD2H
by Joachim Ernst 28 Jul '09

28 Jul '09

Hi, output for EG45M-UD2H attached. I was trying to read from the flash: sudo flashrom -r backup.bin flashrom v0.9.0-r667 No coreboot table found. Found chipset "Intel ICH10R", enabling flash write... OK. This chipset supports the following protocols: LPC,FWH,SPI. (Calibrating delay loop... OK. Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address 0xfff00000. Reading flash... done. But the output doesn't match with the vendor supplied biosfile. Maybe I'll backup the BIOS from a windows tool, and check, if these are the same. Or the dualbios is the culprit of this behaviour. Regards, Joachim Carl-Daniel Hailfinger schrieb: > Hi Joachim, > > thanks for your reports. > > Could you please rerun latest flashrom compiled from subversion > (revision 667) on all these boards and mail the output to > flashrom(a)flashrom.org > Thanks! > > Regards, > Carl-Daniel > flashrom v0.9.0-r667 No coreboot table found. Found chipset "VIA VT8237", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 402M loops per second, 100 myus = 262 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x50, id2 0x00 Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0x00, id2 0x00 Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0x00, id2 0x00 Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Lock status for 0x000000 (size 0x010000) is ff, write locked down Lock status for 0x010000 (size 0x010000) is ff, write locked down Lock status for 0x020000 (size 0x010000) is ff, write locked down Lock status for 0x030000 (size 0x010000) is ff, write locked down Lock status for 0x040000 (size 0x010000) is ff, write locked down Lock status for 0x050000 (size 0x010000) is ff, write locked down Lock status for 0x060000 (size 0x010000) is ff, write locked down Lock status for 0x070000 (size 0x010000) is ff, write locked down Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xbf, id2 0x60 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xbf, id2 0x60 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x00, id2 0x00 Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xbf, id2 0x60 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xff, id2 0xff Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0xbf, id2 0x60 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. No operations were specified. flashrom v0.9.0-r667 No coreboot table found. Found chipset "VIA VT8237", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. No operations were specified.

1 1

Re: [flashrom] Lenovo ThinkCenter A60 (8991-39U)
by ron minnich 28 Jul '09

28 Jul '09

you're a far braver man than I am. I would never do this :-) You never want to try this on untried hardware unless you can very easily replace fhe flash part. It is possible for a flash like this to sort of work. Or maybe not. But I hope your laptop still boots. thanks ron

2 1

Lenovo ThinkCenter A60 (8991-39U)
by Justin Chevrier 28 Jul '09

28 Jul '09

Hi Guys, I decided to try Flashrom on one of the Lenovo systems we have onsite here. Reading appears to work and it verifies against the chip (although the resulting file does not match the size of file provided by Lenovo (Lenovo's file is larger) so I'm not sure if there's some extra stuff in there). Below is the message I receive when attempting to write to flash. I have attached the output from the standard tools. The BIOS chip on this board is socketed and I have other systems of the same type so I can easily swap chips if something goes south. If there's anything else I can do/test I'd be more than happy to try! Justin Chevrier flashrom v0.9.0-runknown No coreboot table found. Found chipset "NVIDIA MCP51", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF040B" (512 KB, LPC) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x4e, failed byte count from 0x00000000-0x0000ffff: 0xf0b1 ERASE FAILED! ERASE FAILED! ERASE FAILED! ERASE FAILED! FAILED!

1 0

[PATCH] Kill spurious cbtable related board enable warning
by Carl-Daniel Hailfinger 27 Jul '09

27 Jul '09

Boards with coreboot have a cbtable containing vendor and board name. flashrom tries to match these with board enable entries in its database. If no such board enable entry exists because the board doesn't need one, flashrom complains. Silence that complaint. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-cbtable_boardenable_nowarn/flash.h =================================================================== --- flashrom-cbtable_boardenable_nowarn/flash.h (Revision 667) +++ flashrom-cbtable_boardenable_nowarn/flash.h (Arbeitskopie) @@ -402,6 +402,7 @@ /* cbtable.c */ int coreboot_init(void); extern char *lb_part, *lb_vendor; +extern int partvendor_from_cbtable; /* spi.c */ enum spi_controller { Index: flashrom-cbtable_boardenable_nowarn/cbtable.c =================================================================== --- flashrom-cbtable_boardenable_nowarn/cbtable.c (Revision 667) +++ flashrom-cbtable_boardenable_nowarn/cbtable.c (Arbeitskopie) @@ -31,6 +31,7 @@ #include "coreboot_tables.h" char *lb_part = NULL, *lb_vendor = NULL; +int partvendor_from_cbtable = 0; static unsigned long compute_checksum(void *addr, unsigned long length) { @@ -150,6 +151,7 @@ if (lb_part) { printf("Overwritten by command line, vendor ID: %s, part ID: %s.\n", lb_vendor, lb_part); } else { + partvendor_from_cbtable = 1; lb_part = strdup(part); lb_vendor = strdup(vendor); } Index: flashrom-cbtable_boardenable_nowarn/board_enable.c =================================================================== --- flashrom-cbtable_boardenable_nowarn/board_enable.c (Revision 667) +++ flashrom-cbtable_boardenable_nowarn/board_enable.c (Arbeitskopie) @@ -1134,7 +1134,14 @@ if (partmatch) return partmatch; - printf("\nUnknown vendor:board from coreboot table or -m option: %s:%s\n\n", vendor, part); + if (partvendor_from_cbtable) { + printf("vendor:board from coreboot table is %s:%s, apparently " + "no board specific flash chip write enable is needed.\n", + vendor, part); + } else { + printf("\nUnknown vendor:board from -m option: %s:%s\n\n", + vendor, part); + } return NULL; } -- http://www.hailfinger.org/

2 3

[PATCH] protection-free boards
by Stefan Reinauer 27 Jul '09

27 Jul '09

Hi, this patch makes flashrom "protection-free boards" friendly when coreboot is running by making the board->enable() function optional in the board structure. Stefan -- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info(a)coresystems.de • http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg • HRB 7656 Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

2 1

[commit] r667 - trunk
by svn＠flashrom.org 24 Jul '09

24 Jul '09

Author: hailfinger Date: 2009-07-24 15:59:27 +0200 (Fri, 24 Jul 2009) New Revision: 667 Modified: trunk/flashchips.c trunk/flashchips.h Log: Add IDs for 51 new flash chips: AMIC A29400T AMIC A29400U AMIC A29800T AMIC A29800U AMIC A29L004T AMIC A29L004U AMIC A29L008T AMIC A29L008U AMIC A29L040 Macronix MX29F004B Macronix MX29F004T Macronix MX29F022T Macronix MX29F080 Macronix MX29F800B Macronix MX29F800T Macronix MX29LV081 Spansion MBM29DL400BC Spansion MBM29DL400TC Spansion MBM29DL800BA Spansion MBM29DL800TA Spansion MBM29F002BC Spansion MBM29F002TC Spansion MBM29F040C Spansion MBM29F080A Spansion MBM29F200BC Spansion MBM29F200TC Spansion MBM29F800BA Spansion MBM29F800TA Spansion MBM29LV002BC Spansion MBM29LV002TC Spansion MBM29LV004BC Spansion MBM29LV004TC Spansion MBM29LV008BA Spansion MBM29LV008TA Spansion MBM29LV080A Spansion MBM29LV200BC Spansion MBM29LV200TC Spansion MBM29LV400BC Spansion MBM29LV400TC Spansion MBM29LV800BA Spansion MBM29LV800TA SST 49LF030A ST M29F080 ST M29F200BB ST M29F200BT ST M29F400BB ST M29F800DB ST M29F800DT Winbond W39L020 Winbond W39L040 Winbond W49F020 These still need to be added to flashchips.c, but if we ever encounter them in real life, the ID->name lookup will be a lot easier. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/flashchips.c =================================================================== --- trunk/flashchips.c 2009-07-24 12:18:54 UTC (rev 666) +++ trunk/flashchips.c 2009-07-24 13:59:27 UTC (rev 667) @@ -1428,10 +1428,10 @@ { .vendor = "Macronix", - .name = "MX29LV040C", + .name = "MX29LV040", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = MX_ID, - .model_id = MX_29LV040C, + .model_id = MX_29LV040, .total_size = 512, .page_size = 64 * 1024, .tested = TEST_OK_PR, Modified: trunk/flashchips.h =================================================================== --- trunk/flashchips.h 2009-07-24 12:18:54 UTC (rev 666) +++ trunk/flashchips.h 2009-07-24 13:59:27 UTC (rev 667) @@ -54,6 +54,15 @@ #define AMIC_A29002B 0x0d #define AMIC_A29002T 0x8c #define AMIC_A29040B 0x86 +#define AMIC_A29400T 0xB0 /* Same as 294001T */ +#define AMIC_A29400U 0x31 /* Same as A294001U */ +#define AMIC_A29800T 0x0E +#define AMIC_A29800U 0x8F +#define AMIC_A29L004T 0x34 /* Same as A29L400T */ +#define AMIC_A29L004U 0xB5 /* Same as A29L400U */ +#define AMIC_A29L008T 0x1A /* Same as A29L800T */ +#define AMIC_A29L008U 0x9B /* Same as A29L800U */ +#define AMIC_A29L040 0x92 #define AMIC_A49LF040A 0x9d /* This chip vendor/device ID is probably a misinterpreted LHA header. */ @@ -65,7 +74,7 @@ #define AT_25DF041A 0x4401 #define AT_25DF081 0x4502 #define AT_25DF161 0x4602 -#define AT_25DF321 0x4700 /* also 26DF321 */ +#define AT_25DF321 0x4700 /* Same as 26DF321 */ #define AT_25DF321A 0x4701 #define AT_25DF641 0x4800 #define AT_25F512A 0x65 /* Needs special RDID. AT25F512A_RDID 15 1d */ @@ -77,7 +86,7 @@ #define AT_26DF081A 0x4501 #define AT_26DF161 0x4600 #define AT_26DF161A 0x4601 -#define AT_26DF321 0x4700 /* also 25DF321 */ +#define AT_26DF321 0x4700 /* Same as 25DF321 */ #define AT_26F004 0x0400 #define AT_29C040A 0xA4 #define AT_29C010A 0xD5 @@ -129,14 +138,14 @@ */ #define EON_ID 0x7F1C /* EON Silicon Devices */ #define EON_ID_NOPREFIX 0x1C /* EON, missing 0x7F prefix */ -#define EN_25B05 0x2010 /* also P05, 2^19 kbit or 2^16 kByte */ -#define EN_25B10 0x2011 /* also P10 */ -#define EN_25B20 0x2012 /* also P20 */ -#define EN_25B40 0x2013 /* also P40 */ -#define EN_25B80 0x2014 /* also P80 */ -#define EN_25B16 0x2015 /* also P16 */ -#define EN_25B32 0x2016 /* also P32 */ -#define EN_25B64 0x2017 /* also P64 */ +#define EN_25B05 0x2010 /* Same as P05, 2^19 kbit or 2^16 kByte */ +#define EN_25B10 0x2011 /* Same as P10 */ +#define EN_25B20 0x2012 /* Same as P20 */ +#define EN_25B40 0x2013 /* Same as P40 */ +#define EN_25B80 0x2014 /* Same as P80 */ +#define EN_25B16 0x2015 /* Same as P16 */ +#define EN_25B32 0x2016 /* Same as P32 */ +#define EN_25B64 0x2017 /* Same as P64 */ #define EN_25D16 0x3015 #define EN_25F05 0x3110 #define EN_25F10 0x3111 @@ -150,14 +159,39 @@ #define EN_29F040A 0x7F04 #define EN_29LV010 0x7F6E #define EN_29LV040A 0x7F4F /* EN_29LV040(A) */ -#define EN_29F002T 0x7F92 /* Also EN29F002A */ -#define EN_29F002B 0x7F97 /* Also EN29F002AN */ +#define EN_29F002T 0x7F92 /* Same as EN29F002A */ +#define EN_29F002B 0x7F97 /* Same as EN29F002AN */ #define FUJITSU_ID 0x04 /* Fujitsu */ +#define MBM29DL400BC 0x0F +#define MBM29DL400TC 0x0C +#define MBM29DL800BA 0xCB +#define MBM29DL800TA 0x4A +#define MBM29F002BC 0x34 +#define MBM29F002TC 0xB0 +#define MBM29F004BC 0x7B +#define MBM29F004TC 0x77 +#define MBM29F040C 0xA4 +#define MBM29F080A 0xD5 +#define MBM29F200BC 0x57 +#define MBM29F200TC 0x51 #define MBM29F400BC 0xAB #define MBM29F400TC 0x23 -#define MBM29F004BC 0x7B -#define MBM29F004TC 0x77 +#define MBM29F800BA 0x58 +#define MBM29F800TA 0xD6 +#define MBM29LV002BC 0xC2 +#define MBM29LV002TC 0x40 +#define MBM29LV004BC 0xB6 +#define MBM29LV004TC 0xB5 +#define MBM29LV008BA 0x37 +#define MBM29LV008TA 0x3E +#define MBM29LV080A 0x38 +#define MBM29LV200BC 0xBF +#define MBM29LV200TC 0x3B +#define MBM29LV400BC 0xBA +#define MBM29LV400TC 0xB9 +#define MBM29LV800BA 0x5B /* Same as MBM29LV800BE */ +#define MBM29LV800TA 0xDA /* Same as MBM29LV800TE */ #define HYUNDAI_ID 0xAD /* Hyundai */ @@ -191,32 +225,39 @@ #define MX_25L12805 0x2018 /* MX25L12805 */ #define MX_25L1635D 0x2415 #define MX_25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */ -#define MX_29F002B 0x34 -#define MX_29F002T 0xB0 +#define MX_29F002B 0x34 /* Same as MX29F002NB */ +#define MX_29F002T 0xB0 /* Same as MX29F002NT */ +#define MX_29F004B 0x46 +#define MX_29F004T 0x45 +#define MX_29F022T 0x36 /* Same as MX29F022NT */ +#define MX_29F040 0xA4 /* Same as MX29F040C */ +#define MX_29F080 0xD5 +#define MX_29F200B 0x57 /* Same as MX29F200CB */ +#define MX_29F200T 0x51 /* Same as MX29F200CT */ +#define MX_29F400B 0xAB /* Same as MX29F400CB */ +#define MX_29F400T 0x23 /* Same as MX29F400CT */ +#define MX_29F800B 0x58 +#define MX_29F800T 0xD6 #define MX_29LV002CB 0x5A #define MX_29LV002CT 0x59 -#define MX_29LV004CB 0xB6 -#define MX_29LV004CT 0xB5 -#define MX_29LV008CB 0x37 -#define MX_29LV008CT 0x3E -#define MX_29F040C 0xA4 -#define MX_29F200CB 0x57 -#define MX_29F200CT 0x51 -#define MX_29F400CB 0xAB -#define MX_29F400CT 0x23 -#define MX_29LV040C 0x4F +#define MX_29LV004B 0xB6 /* Same as MX29LV004CB */ +#define MX_29LV004T 0xB5 /* Same as MX29LV004CT */ +#define MX_29LV008B 0x37 /* Same as MX29LV008CB */ +#define MX_29LV008T 0x3E /* Same as MX29LV008CT */ +#define MX_29LV040 0x4F /* Same as MX29LV040C */ +#define MX_29LV081 0x38 #define MX_29LV128DB 0x7A #define MX_29LV128DT 0x7E #define MX_29LV160DB 0x49 /* Same as MX29LV161DB/MX29LV160CB */ #define MX_29LV160DT 0xC4 /* Same as MX29LV161DT/MX29LV160CT */ #define MX_29LV320DB 0xA8 /* Same as MX29LV321DB */ #define MX_29LV320DT 0xA7 /* Same as MX29LV321DT */ -#define MX_29LV400CB 0xBA -#define MX_29LV400CT 0xB9 -#define MX_29LV800CB 0x5B -#define MX_29LV800CT 0xDA +#define MX_29LV400B 0xBA /* Same as MX29LV400CB */ +#define MX_29LV400T 0xB9 /* Same as MX29LV400CT */ #define MX_29LV640DB 0xCB /* Same as MX29LV640EB */ #define MX_29LV640DT 0xC9 /* Same as MX29LV640ET */ +#define MX_29LV800B 0x5B /* Same as MX29LV800CB */ +#define MX_29LV800T 0xDA /* Same as MX29LV800CT */ #define MX_29SL402CB 0xF1 #define MX_29SL402CT 0x70 #define MX_29SL800CB 0x6B /* Same as MX29SL802CB */ @@ -237,7 +278,7 @@ #define PMC_29F002T 0x1D #define PMC_29F002B 0x2D #define PMC_39LV512 0x1B -#define PMC_39F010 0x1C /* also Pm39LV010 */ +#define PMC_39F010 0x1C /* Same as Pm39LV010 */ #define PMC_39LV020 0x3D #define PMC_39LV040 0x3E #define PMC_39F020 0x4D @@ -287,9 +328,9 @@ #define SST_28SF040 0x04 #define SST_29EE512 0x5D #define SST_29EE010 0x07 -#define SST_29LE010 0x08 /* also SST29VE010 */ -#define SST_29EE020A 0x10 /* also SST29EE020 */ -#define SST_29LE020 0x12 /* also SST29VE020 */ +#define SST_29LE010 0x08 /* Same as SST29VE010 */ +#define SST_29EE020A 0x10 /* Same as SST29EE020 */ +#define SST_29LE020 0x12 /* Same as SST29VE020 */ #define SST_29SF020 0x24 #define SST_29VF020 0x25 #define SST_29SF040 0x13 @@ -301,11 +342,12 @@ #define SST_39VF010 0xD5 #define SST_39VF020 0xD6 #define SST_39VF040 0xD7 -#define SST_39VF080 0xD8 +#define SST_39VF080 0xD8 /* Same as SST_39LF080/39VF080/39VF088 */ #define SST_49LF040B 0x50 #define SST_49LF040 0x51 #define SST_49LF020 0x61 #define SST_49LF020A 0x52 +#define SST_49LF030A 0x1C #define SST_49LF080A 0x5B #define SST_49LF002A 0x57 #define SST_49LF003A 0x1B @@ -349,8 +391,14 @@ #define ST_M50LPW116 0x30 #define ST_M29F002B 0x34 #define ST_M29F002T 0xB0 /* M29F002T / M29F002NT */ +#define ST_M29F040B 0xE2 +#define ST_M29F080 0xF1 +#define ST_M29F200BT 0xD3 +#define ST_M29F200BB 0xD4 #define ST_M29F400BT 0xD5 -#define ST_M29F040B 0xE2 +#define ST_M29F400BB 0xD6 +#define ST_M29F800DB 0x58 +#define ST_M29F800DT 0xEC #define ST_M29W010B 0x23 #define ST_M29W040B 0xE3 @@ -382,6 +430,8 @@ #define W_29C020C 0x45 #define W_29C040P 0x46 #define W_29EE011 0xC1 +#define W_39L020 0xB5 +#define W_39L040 0xB6 #define W_39V040FA 0x34 #define W_39V040A 0x3D #define W_39V040B 0x54 @@ -390,6 +440,7 @@ #define W_39V080FA 0xD3 #define W_39V080FA_DM 0x93 #define W_49F002U 0x0B +#define W_49F020 0x8C #define W_49V002A 0xB0 #define W_49V002FA 0x32

1 0

[PATCH] Add IDs for 51 new flash chips
by Carl-Daniel Hailfinger 24 Jul '09

24 Jul '09

Add IDs for 51 new flash chips: AMIC A29400T AMIC A29400U AMIC A29800T AMIC A29800U AMIC A29L004T AMIC A29L004U AMIC A29L008T AMIC A29L008U AMIC A29L040 Macronix MX29F004B Macronix MX29F004T Macronix MX29F022T Macronix MX29F080 Macronix MX29F800B Macronix MX29F800T Macronix MX29LV081 Spansion MBM29DL400BC Spansion MBM29DL400TC Spansion MBM29DL800BA Spansion MBM29DL800TA Spansion MBM29F002BC Spansion MBM29F002TC Spansion MBM29F040C Spansion MBM29F080A Spansion MBM29F200BC Spansion MBM29F200TC Spansion MBM29F800BA Spansion MBM29F800TA Spansion MBM29LV002BC Spansion MBM29LV002TC Spansion MBM29LV004BC Spansion MBM29LV004TC Spansion MBM29LV008BA Spansion MBM29LV008TA Spansion MBM29LV080A Spansion MBM29LV200BC Spansion MBM29LV200TC Spansion MBM29LV400BC Spansion MBM29LV400TC Spansion MBM29LV800BA Spansion MBM29LV800TA SST 49LF030A ST M29F080 ST M29F200BB ST M29F200BT ST M29F400BB ST M29F800DB ST M29F800DT Winbond W39L020 Winbond W39L040 Winbond W49F020 These still need to be added to flashchips.c, but if we ever encounter them in real life, the ID->name lookup will be a lot easier. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-newids/flashchips.c =================================================================== --- flashrom-newids/flashchips.c (Revision 664) +++ flashrom-newids/flashchips.c (Arbeitskopie) @@ -1419,10 +1419,10 @@ { .vendor = "Macronix", - .name = "MX29LV040C", + .name = "MX29LV040", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = MX_ID, - .model_id = MX_29LV040C, + .model_id = MX_29LV040, .total_size = 512, .page_size = 64 * 1024, .tested = TEST_OK_PR, Index: flashrom-newids/flashchips.h =================================================================== --- flashrom-newids/flashchips.h (Revision 664) +++ flashrom-newids/flashchips.h (Arbeitskopie) @@ -54,6 +54,15 @@ #define AMIC_A29002B 0x0d #define AMIC_A29002T 0x8c #define AMIC_A29040B 0x86 +#define AMIC_A29400T 0xB0 /* Same as 294001T */ +#define AMIC_A29400U 0x31 /* Same as A294001U */ +#define AMIC_A29800T 0x0E +#define AMIC_A29800U 0x8F +#define AMIC_A29L004T 0x34 /* Same as A29L400T */ +#define AMIC_A29L004U 0xB5 /* Same as A29L400U */ +#define AMIC_A29L008T 0x1A /* Same as A29L800T */ +#define AMIC_A29L008U 0x9B /* Same as A29L800U */ +#define AMIC_A29L040 0x92 #define AMIC_A49LF040A 0x9d /* This chip vendor/device ID is probably a misinterpreted LHA header. */ @@ -65,7 +74,7 @@ #define AT_25DF041A 0x4401 #define AT_25DF081 0x4502 #define AT_25DF161 0x4602 -#define AT_25DF321 0x4700 /* also 26DF321 */ +#define AT_25DF321 0x4700 /* Same as 26DF321 */ #define AT_25DF321A 0x4701 #define AT_25DF641 0x4800 #define AT_25F512A 0x65 /* Needs special RDID. AT25F512A_RDID 15 1d */ @@ -77,7 +86,7 @@ #define AT_26DF081A 0x4501 #define AT_26DF161 0x4600 #define AT_26DF161A 0x4601 -#define AT_26DF321 0x4700 /* also 25DF321 */ +#define AT_26DF321 0x4700 /* Same as 25DF321 */ #define AT_26F004 0x0400 #define AT_29C040A 0xA4 #define AT_29C010A 0xD5 @@ -129,14 +138,14 @@ */ #define EON_ID 0x7F1C /* EON Silicon Devices */ #define EON_ID_NOPREFIX 0x1C /* EON, missing 0x7F prefix */ -#define EN_25B05 0x2010 /* also P05, 2^19 kbit or 2^16 kByte */ -#define EN_25B10 0x2011 /* also P10 */ -#define EN_25B20 0x2012 /* also P20 */ -#define EN_25B40 0x2013 /* also P40 */ -#define EN_25B80 0x2014 /* also P80 */ -#define EN_25B16 0x2015 /* also P16 */ -#define EN_25B32 0x2016 /* also P32 */ -#define EN_25B64 0x2017 /* also P64 */ +#define EN_25B05 0x2010 /* Same as P05, 2^19 kbit or 2^16 kByte */ +#define EN_25B10 0x2011 /* Same as P10 */ +#define EN_25B20 0x2012 /* Same as P20 */ +#define EN_25B40 0x2013 /* Same as P40 */ +#define EN_25B80 0x2014 /* Same as P80 */ +#define EN_25B16 0x2015 /* Same as P16 */ +#define EN_25B32 0x2016 /* Same as P32 */ +#define EN_25B64 0x2017 /* Same as P64 */ #define EN_25D16 0x3015 #define EN_25F05 0x3110 #define EN_25F10 0x3111 @@ -150,14 +159,39 @@ #define EN_29F040A 0x7F04 #define EN_29LV010 0x7F6E #define EN_29LV040A 0x7F4F /* EN_29LV040(A) */ -#define EN_29F002T 0x7F92 /* Also EN29F002A */ -#define EN_29F002B 0x7F97 /* Also EN29F002AN */ +#define EN_29F002T 0x7F92 /* Same as EN29F002A */ +#define EN_29F002B 0x7F97 /* Same as EN29F002AN */ #define FUJITSU_ID 0x04 /* Fujitsu */ +#define MBM29DL400BC 0x0F +#define MBM29DL400TC 0x0C +#define MBM29DL800BA 0xCB +#define MBM29DL800TA 0x4A +#define MBM29F002BC 0x34 +#define MBM29F002TC 0xB0 +#define MBM29F004BC 0x7B +#define MBM29F004TC 0x77 +#define MBM29F040C 0xA4 +#define MBM29F080A 0xD5 +#define MBM29F200BC 0x57 +#define MBM29F200TC 0x51 #define MBM29F400BC 0xAB #define MBM29F400TC 0x23 -#define MBM29F004BC 0x7B -#define MBM29F004TC 0x77 +#define MBM29F800BA 0x58 +#define MBM29F800TA 0xD6 +#define MBM29LV002BC 0xC2 +#define MBM29LV002TC 0x40 +#define MBM29LV004BC 0xB6 +#define MBM29LV004TC 0xB5 +#define MBM29LV008BA 0x37 +#define MBM29LV008TA 0x3E +#define MBM29LV080A 0x38 +#define MBM29LV200BC 0xBF +#define MBM29LV200TC 0x3B +#define MBM29LV400BC 0xBA +#define MBM29LV400TC 0xB9 +#define MBM29LV800BA 0x5B /* Same as MBM29LV800BE */ +#define MBM29LV800TA 0xDA /* Same as MBM29LV800TE */ #define HYUNDAI_ID 0xAD /* Hyundai */ @@ -191,32 +225,39 @@ #define MX_25L12805 0x2018 /* MX25L12805 */ #define MX_25L1635D 0x2415 #define MX_25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */ -#define MX_29F002B 0x34 -#define MX_29F002T 0xB0 +#define MX_29F002B 0x34 /* Same as MX29F002NB */ +#define MX_29F002T 0xB0 /* Same as MX29F002NT */ +#define MX_29F004B 0x46 +#define MX_29F004T 0x45 +#define MX_29F022T 0x36 /* Same as MX29F022NT */ +#define MX_29F040 0xA4 /* Same as MX29F040C */ +#define MX_29F080 0xD5 +#define MX_29F200B 0x57 /* Same as MX29F200CB */ +#define MX_29F200T 0x51 /* Same as MX29F200CT */ +#define MX_29F400B 0xAB /* Same as MX29F400CB */ +#define MX_29F400T 0x23 /* Same as MX29F400CT */ +#define MX_29F800B 0x58 +#define MX_29F800T 0xD6 #define MX_29LV002CB 0x5A #define MX_29LV002CT 0x59 -#define MX_29LV004CB 0xB6 -#define MX_29LV004CT 0xB5 -#define MX_29LV008CB 0x37 -#define MX_29LV008CT 0x3E -#define MX_29F040C 0xA4 -#define MX_29F200CB 0x57 -#define MX_29F200CT 0x51 -#define MX_29F400CB 0xAB -#define MX_29F400CT 0x23 -#define MX_29LV040C 0x4F +#define MX_29LV004B 0xB6 /* Same as MX29LV004CB */ +#define MX_29LV004T 0xB5 /* Same as MX29LV004CT */ +#define MX_29LV008B 0x37 /* Same as MX29LV008CB */ +#define MX_29LV008T 0x3E /* Same as MX29LV008CT */ +#define MX_29LV040 0x4F /* Same as MX29LV040C */ +#define MX_29LV081 0x38 #define MX_29LV128DB 0x7A #define MX_29LV128DT 0x7E #define MX_29LV160DB 0x49 /* Same as MX29LV161DB/MX29LV160CB */ #define MX_29LV160DT 0xC4 /* Same as MX29LV161DT/MX29LV160CT */ #define MX_29LV320DB 0xA8 /* Same as MX29LV321DB */ #define MX_29LV320DT 0xA7 /* Same as MX29LV321DT */ -#define MX_29LV400CB 0xBA -#define MX_29LV400CT 0xB9 -#define MX_29LV800CB 0x5B -#define MX_29LV800CT 0xDA +#define MX_29LV400B 0xBA /* Same as MX29LV400CB */ +#define MX_29LV400T 0xB9 /* Same as MX29LV400CT */ #define MX_29LV640DB 0xCB /* Same as MX29LV640EB */ #define MX_29LV640DT 0xC9 /* Same as MX29LV640ET */ +#define MX_29LV800B 0x5B /* Same as MX29LV800CB */ +#define MX_29LV800T 0xDA /* Same as MX29LV800CT */ #define MX_29SL402CB 0xF1 #define MX_29SL402CT 0x70 #define MX_29SL800CB 0x6B /* Same as MX29SL802CB */ @@ -237,7 +278,7 @@ #define PMC_29F002T 0x1D #define PMC_29F002B 0x2D #define PMC_39LV512 0x1B -#define PMC_39F010 0x1C /* also Pm39LV010 */ +#define PMC_39F010 0x1C /* Same as Pm39LV010 */ #define PMC_39LV020 0x3D #define PMC_39LV040 0x3E #define PMC_39F020 0x4D @@ -287,9 +328,9 @@ #define SST_28SF040 0x04 #define SST_29EE512 0x5D #define SST_29EE010 0x07 -#define SST_29LE010 0x08 /* also SST29VE010 */ -#define SST_29EE020A 0x10 /* also SST29EE020 */ -#define SST_29LE020 0x12 /* also SST29VE020 */ +#define SST_29LE010 0x08 /* Same as SST29VE010 */ +#define SST_29EE020A 0x10 /* Same as SST29EE020 */ +#define SST_29LE020 0x12 /* Same as SST29VE020 */ #define SST_29SF020 0x24 #define SST_29VF020 0x25 #define SST_29SF040 0x13 @@ -301,11 +342,12 @@ #define SST_39VF010 0xD5 #define SST_39VF020 0xD6 #define SST_39VF040 0xD7 -#define SST_39VF080 0xD8 +#define SST_39VF080 0xD8 /* Same as SST_39LF080/39VF080/39VF088 */ #define SST_49LF040B 0x50 #define SST_49LF040 0x51 #define SST_49LF020 0x61 #define SST_49LF020A 0x52 +#define SST_49LF030A 0x1C #define SST_49LF080A 0x5B #define SST_49LF002A 0x57 #define SST_49LF003A 0x1B @@ -349,8 +391,14 @@ #define ST_M50LPW116 0x30 #define ST_M29F002B 0x34 #define ST_M29F002T 0xB0 /* M29F002T / M29F002NT */ +#define ST_M29F040B 0xE2 +#define ST_M29F080 0xF1 +#define ST_M29F200BT 0xD3 +#define ST_M29F200BB 0xD4 #define ST_M29F400BT 0xD5 -#define ST_M29F040B 0xE2 +#define ST_M29F400BB 0xD6 +#define ST_M29F800DB 0x58 +#define ST_M29F800DT 0xEC #define ST_M29W010B 0x23 #define ST_M29W040B 0xE3 @@ -382,6 +430,8 @@ #define W_29C020C 0x45 #define W_29C040P 0x46 #define W_29EE011 0xC1 +#define W_39L020 0xB5 +#define W_39L040 0xB6 #define W_39V040FA 0x34 #define W_39V040A 0x3D #define W_39V040B 0x54 @@ -390,6 +440,7 @@ #define W_39V080FA 0xD3 #define W_39V080FA_DM 0x93 #define W_49F002U 0x0B +#define W_49F020 0x8C #define W_49V002A 0xB0 #define W_49V002FA 0x32 -- http://www.hailfinger.org/

2 1

writing to W39V040A failed!
by Oliver Niesner 24 Jul '09

24 Jul '09

Today i've got the following error message while trying to write to a winbond W39V040A chip: > root@security:~/flashrom# ./flashrom -w 49LF040B.bin > flashrom v0.9.0-r665 > No coreboot table found. > Found chipset "NVIDIA MCP51", enabling flash write... OK. > This chipset supports the following protocols: Non-SPI. > Calibrating delay loop... OK. > Found chip "Winbond W39V040A" (512 KB, LPC) at physical address 0xfff80000. > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x49, failed byte count from 0x00000000-0x0007ffff: 0x45d42 > ERASE FAILED! > ERASE FAILED! > Verifying flash... VERIFY FAILED at 0x00000000! Expected=0x21, Read=0x49, failed byte count from 0x00000000-0x0007ffff: 0x6bf33 Oliver -- GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01

2 3

[commit] r666 - trunk
by svn＠flashrom.org 24 Jul '09

24 Jul '09

Author: hailfinger Date: 2009-07-24 14:18:54 +0200 (Fri, 24 Jul 2009) New Revision: 666 Modified: trunk/flashrom.c Log: If writing failed, verifying is pointless. Abort instead. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Oliver Niesner <oli(a)rhce.servebbs.net> Modified: trunk/flashrom.c =================================================================== --- trunk/flashrom.c 2009-07-23 12:42:01 UTC (rev 665) +++ trunk/flashrom.c 2009-07-24 12:18:54 UTC (rev 666) @@ -851,12 +851,17 @@ fprintf(stderr, "Error: flashrom has no write function for this flash chip.\n"); return 1; } - ret |= flash->write(flash, buf); - if (!ret) printf("COMPLETE.\n"); + ret = flash->write(flash, buf); + if (ret) { + fprintf(stderr, "FAILED!\n"); + return 1; + } else { + printf("COMPLETE.\n"); + } } if (verify_it) - ret |= verify_flash(flash, buf); + ret = verify_flash(flash, buf); programmer_shutdown();

1 0

ECS NF650ISLIT-A V1.0
by Glenn Mueller 24 Jul '09

24 Jul '09

acked by: Glenn Mueller This board is a 650i base chipset. All functions of flashrom work on it. I did not make an erase output it seemed a mute point as I took the bios off the board with a read, erased it, then reflashed and the computer runs fine. Sorry it took so long to get this done luc I had to iron out some ram issues with the board. _________________________________________________________________ Windows Live™ SkyDrive™: Store, access, and share your photos. See how. http://windowslive.com/Online/SkyDrive?ocid=TXT_TAGLM_WL_CS_SD_photos_072009

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom