flashrom

flashrom@flashrom.org

3 participants
9188 discussions

[commit] r696 - trunk
by svn＠flashrom.org 21 Aug '09

21 Aug '09

Author: hailfinger Date: 2009-08-21 19:26:13 +0200 (Fri, 21 Aug 2009) New Revision: 696 Modified: trunk/chipset_enable.c Log: Anne Le Coq <annyvonne.le_coq(a)alcatel-lucent.fr> reported that flashrom didn't recognize her ICH9 LPC controller on the Green City Intel Customer Reference Board with ICH9 + Tylersburg Chipset. According to http://pci-ids.ucw.cz/read/PC/8086/2910 the ID 0x8086/0x2910 was used for engineering samples. No intel doc mentions this ID at all. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Anne Le Coq <annyvonne.le_coq(a)alcatel-lucent.fr> Modified: trunk/chipset_enable.c =================================================================== --- trunk/chipset_enable.c 2009-08-20 18:45:18 UTC (rev 695) +++ trunk/chipset_enable.c 2009-08-21 17:26:13 UTC (rev 696) @@ -1012,6 +1012,7 @@ {0x8086, 0x2919, OK, "Intel", "ICH9M", enable_flash_ich9}, {0x8086, 0x2917, OK, "Intel", "ICH9M-E", enable_flash_ich9}, {0x8086, 0x2916, OK, "Intel", "ICH9R", enable_flash_ich9}, + {0x8086, 0x2910, OK, "Intel", "ICH9 Engineering Sample", enable_flash_ich9}, {0x8086, 0x1234, NT, "Intel", "MPIIX", enable_flash_piix4}, {0x8086, 0x7000, OK, "Intel", "PIIX3", enable_flash_piix4}, {0x8086, 0x7110, OK, "Intel", "PIIX4/4E/4M", enable_flash_piix4},

1 0

Re: [flashrom] [PATCH] Add ICH9 Engineering sample to chipset enables
by Carl-Daniel Hailfinger 21 Aug '09

21 Aug '09

forwarding to list... -------- Original Message -------- Subject: RE: [flashrom] [PATCH] Add ICH9 Engineering sample to chipset enables Date: Fri, 21 Aug 2009 18:41:36 +0200 From: LE COQ ANNYVONNE <Annyvonne.Le_Coq(a)alcatel-lucent.fr> To: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> References: <4A8EB02D.9000607(a)gmx.net> Acked-by: Anne Le Coq <annyvonne.le_coq(a)alcatel-lucent.fr> Hi Carl-Daniel, It's the modification I've done to accept the ICH9, and it works fine. I just mention "ICH9" instead of "ICH9 Engineering Sample", but I don't think it's very important. My problem now is that the opcode 06 is unknown in the opcode table. To continue my test, I replace one of unused opcode (0B9H) by 06 and it's better. But it's not a good solution... Then, after that, I can only read, write and erase my flash till A000H. I think it's because I use the ICH9 in descriptor mode. I have the following fault: ERROR at 0x0000a000: Expected=0xff, Read=0x00 Have you got an idea about this issue ? Thanks Anne

1 0

bad flash ?
by Benjamin BELLEC 21 Aug '09

21 Aug '09

Hello, I have tried to flash the BIOS of my motherboard. It's a Gigabyte G33M-DS2R (ICH9R + SST SST25VF080B" (1024 KB)). [root@scarabee benjamin]# flashrom --version flashrom v0.9.0 (on Fedora 11 x86_64) Here is the log of the flash (my motherboard was previously in version F7) : flashrom --write ./G33MDS2R.F8 Calibrating delay loop... OK. No coreboot table found. Found chipset "Intel ICH9R", enabling flash write... OK. Found chip "SST SST25VF080B" (1024 KB) at physical address 0xfff00000. === This flash part has status UNTESTED for operations: READ ERASE WRITE Please email a report to flashrom(a)coreboot.org if any of the above operations work correctly for you with this flash part. Please include the full output from the program, including chipset found. Thank you for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Programming page: [root@scarabee motherboard_bios_ga-g33m-ds2r_f8]# and I check the BIOS : [root@scarabee motherboard_bios_ga-g33m-ds2r_f8]# flashrom --verify ./G33MDS2R.F8 Calibrating delay loop... OK. No coreboot table found. Found chipset "Intel ICH9R", enabling flash write... OK. Found chip "SST SST25VF080B" (1024 KB) at physical address 0xfff00000. === This flash part has status UNTESTED for operations: READ ERASE WRITE Please email a report to flashrom(a)coreboot.org if any of the above operations work correctly for you with this flash part. Please include the full output from the program, including chipset found. Thank you for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Verifying flash... FAILED at 0x00000000! Expected=0x00, Read=0x01 [root@scarabee motherboard_bios_ga-g33m-ds2r_f8]# and when I try to erase it : [root@scarabee benjamin]# flashrom --erase Calibrating delay loop... OK. No coreboot table found. Found chipset "Intel ICH9R", enabling flash write... OK. Found chip "SST SST25VF080B" (1024 KB) at physical address 0xfff00000. === This flash part has status UNTESTED for operations: READ ERASE WRITE Please email a report to flashrom(a)coreboot.org if any of the above operations work correctly for you with this flash part. Please include the full output from the program, including chipset found. Thank you for your help! === Erasing flash chip... FAILED! ERROR at 0x00000000: Expected=0xff, Read=0x01 [root@scarabee benjamin]# I can post the entire log (--write --verbose) if you want. What can I do, is my BIOS really write or not ? Can I reboot ? Thanks for your time. Benjamin (from France)

3 3

Non-working board submission: Matsonic MS8308E
by Putlinuxonit 21 Aug '09

21 Aug '09

Hi, I've tested this board with flashrom-0.9.0-r695 as well as superiotool r4424. Also contained are dumps from* #lspci -vvnnxxxx*, *#dmidecode* and *#lshw*. As always, a lot of the info is probably duplicated but is provided for the sake of completeness. I'm available for further testing if required. Bios: AMI > Board: Matsonic MS8308E http://www.motherboard.cz/mb/matsonic/MS8308E.htm > Flash Chip: W49F002UP12B (PLCC) > Chipset: Sis 730 > Enjoy!, Udu E. Ogah .~~~~~~~~~~.

1 0

#3: OSError: (13, 'Permission denied')
by flashrom 21 Aug '09

21 Aug '09

#3: OSError: (13, 'Permission denied') ---------------------------------+------------------------------------------ Reporter: hailfinger | Owner: hailfinger Type: defect | Status: new Priority: major | Milestone: Component: flashrom | Version: Keywords: | Dependencies: Patchstatus: there is no patch | ---------------------------------+------------------------------------------ ==== How to Reproduce ==== While doing a POST operation on `/attachment/ticket/2`, Trac issued an internal error. ''(please provide additional details here)'' Request parameters: {{{ {'__FORM_TOKEN': u'88590e6c536c68a9192d038f', 'action': u'new', 'attachment': FieldStorage('attachment', 'test.c', '#include <stdio.h>\n#include <stdint.h>\n\nvoid u64function(uint64_t bar)\n{\n\tprintf("%llx\\n", bar);\n}\n\nint main()\n{\n\tuint32_t hi = 0xdeadbeef;\n\tuint32_t lo = 0xcafebabe;\n\tu64function((((uint64_t) hi) << 32) | lo);\n\treturn 0;\n}\n'), 'description': u'test attachment', 'id': u'2', 'path': u'2', 'realm': u'ticket'} }}} User Agent was: `Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.19) Gecko/20081213 SUSE/1.1.14-1.1 SeaMonkey/1.1.14` ==== System Information ==== || '''Trac''' || `0.11.5` || || '''Python''' || `2.6 (r26:66714, Feb 3 2009, 20:49:49) ` [[br]] `[GCC 4.3.2 [gcc-4_3-branch revision 141291]]` || || '''setuptools''' || `0.6c9` || || '''SQLite''' || `3.6.4` || || '''pysqlite''' || `2.4.1` || || '''Genshi''' || `0.5.1` || || '''Pygments''' || `1.0` || || '''Subversion''' || `1.6.4 (r38063)` || || '''jQuery:''' || `1.2.6` || ==== Python Traceback ==== {{{ Traceback (most recent call last): File "/usr/lib64/python2.6/site-packages/trac/web/main.py", line 444, in _dispatch_request dispatcher.dispatch(req) File "/usr/lib64/python2.6/site-packages/trac/web/main.py", line 205, in dispatch resp = chosen_handler.process_request(req) File "/usr/lib64/python2.6/site-packages/trac/attachment.py", line 398, in process_request self._do_save(req, attachment) File "/usr/lib64/python2.6/site-packages/trac/attachment.py", line 612, in _do_save attachment.insert(filename, upload.file, size) File "/usr/lib64/python2.6/site-packages/trac/attachment.py", line 219, in insert os.makedirs(self.path) File "/usr/lib64/python2.6/os.py", line 150, in makedirs makedirs(head, mode) File "/usr/lib64/python2.6/os.py", line 157, in makedirs mkdir(name, mode) OSError: [Errno 13] Permission denied: '/srv/trac/flashrom/attachments/ticket' }}} -- Ticket URL: <http://www.flashrom.org/trac/flashrom/ticket/3> flashrom <http://www.flashrom.org/>

1 1

#2: test attachments
by flashrom 21 Aug '09

21 Aug '09

#2: test attachments ---------------------------------+------------------------------------------ Reporter: hailfinger | Owner: hailfinger Type: defect | Status: new Priority: major | Milestone: Component: flashrom | Version: Keywords: | Dependencies: Patchstatus: there is no patch | ---------------------------------+------------------------------------------ It seems that attachments do not work... -- Ticket URL: <http://www.flashrom.org/trac/flashrom/ticket/2> flashrom <http://www.flashrom.org/>

1 1

flashrom support for intel pro100 - worthwhile?
by Marko Kraljevic 20 Aug '09

20 Aug '09

The support for 3com NICs got me thinking about other NICs with boot ROMs. I've got a few intel 100 pro PCI cards around, with the 82558 chipset. They have a PLCC socket, and a parallel interface; so they *should* support any PLCC 28/29 family chips. There's good documentation available, so I think adding support should not be too difficult. The only problem is, 82558 only supports up to 64kB [A0:16], and 82559 only supports up to 128kB [A0:17]. So I'm not sure if I should bother, especially with the PLCC socket, and the fact that we already have support for the cheap and common 3com cards. If you guys think it would be worthwhile to support, I can take a stab at it though. :-) datasheet for 82558: http://developer.intel.com/design/network/datashts/29736001.pdf datasheet for 82559: http://download.intel.com/design/network/datashts/73825902.pdf I'll take a look into some of intel's other ethernet controller chips, see if anything supports > 1Mbit. Although I have a suspicion that more modern controllers probably moved away from the parallel bus and/or dumped boot rom altogether. And of course - I'll have to make sure someone sold a physical card with them and a ROM socket! Mark

2 1

Support for MX29F001T/B
by Marko Kraljevic 20 Aug '09

20 Aug '09

Hi, I've added support for MX29F001T/B. I'm not sure the proper way to submit a patch, I've just joined the mailing list recently. I've only got the -T type, but I just tested it and it works with them. The attached files are the patch, the additional .c file (based on mx29f002.c, modified based on datasheet for mx29f001. The trial.txt is output of probe, read, erase, write on the MX29F001T. I compiled and tested this all on an old Soyo SY-6BB [440BX, PIIX4]; It still boots after a read, erase, blank check, write... So it must have worked ;) Hopefully I'm doing this the right way! Let me know if I'm not. Mark ** Probe flashrom v0.9.0-r694 No coreboot table found. Found chipset "Intel PIIX4/4E/4M", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 299M loops per second, 100 myus = 349 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001T, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Found chip "Macronix MX29F001T" (128 KB, Parallel) at physical address 0xfffe0000. Probing for Macronix MX29F001B, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x25, id2 0x9a Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x25, id2 0x9a Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xc2, id2 0x18 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === No operations were specified. ** Read flashrom v0.9.0-r694 No coreboot table found. Found chipset "Intel PIIX4/4E/4M", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 298M loops per second, 100 myus = 348 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001T, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Found chip "Macronix MX29F001T" (128 KB, Parallel) at physical address 0xfffe0000. Probing for Macronix MX29F001B, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x25, id2 0x9a Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x25, id2 0x9a Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xc2, id2 0x18 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === Reading flash... done. ** Erase flashrom v0.9.0-r694 No coreboot table found. Found chipset "Intel PIIX4/4E/4M", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 299M loops per second, 100 myus = 349 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001T, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Found chip "Macronix MX29F001T" (128 KB, Parallel) at physical address 0xfffe0000. Probing for Macronix MX29F001B, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xc2, id2 0x18 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === Erasing flash chip... SUCCESS. **write flashrom v0.9.0-r694 No coreboot table found. Found chipset "Intel PIIX4/4E/4M", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 299M loops per second, 100 myus = 349 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001T, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Found chip "Macronix MX29F001T" (128 KB, Parallel) at physical address 0xfffe0000. Probing for Macronix MX29F001B, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x25, id2 0x9a Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x25, id2 0x9a Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xc2, id2 0x18 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Programming page: address: 0x00000000address: 0x00001000address: 0x00002000address: 0x00003000address: 0x00004000address: 0x00005000address: 0x00006000address: 0x00007000address: 0x00008000address: 0x00009000address: 0x0000a000address: 0x0000b000address: 0x0000c000address: 0x0000d000address: 0x0000e000address: 0x0000f000address: 0x00010000address: 0x00011000address: 0x00012000address: 0x00013000address: 0x00014000address: 0x00015000address: 0x00016000address: 0x00017000address: 0x00018000address: 0x00019000address: 0x0001a000address: 0x0001b000address: 0x0001c000address: 0x0001d000address: 0x0001e000address: 0x0001f000 COMPLETE. Verifying flash... VERIFIED.

2 4

Re: [flashrom] [commit] r695 - trunk
by Stefan Reinauer 20 Aug '09

20 Aug '09

Uwe, do you have some mechanism to check these URLs if they still make sense? It's very likely that the URLs change, while we're not having a new, fixed version out, or that we don't notice when a vendor renames or removes URLs. I think we should refrain from using URLs to vendor sites in our software like this. For actuality, and for legal reasons. just my 2ct Stefan > { "Abit", "IS-10", "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…" }, > + { "ASRock", "K7VT4A+", "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%%2b&s=" }, > + { "ASUS", "A7V600-X", "http://www.asus.com/product.aspx?P_ID=L2XYS0rmtCjeOr4k" }, > + { "ASUS", "M2N68", "http://www.asus.com/product.aspx?P_ID=iDZQ9yNK2CbKW6Zv"}, > { "ASUS", "M3N78 Pro", "http://www.asus.com/product.aspx?P_ID=DVvm9CU0G1bCC4gp" }, > { "ASUS", "MEW-AM", "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/" }, > { "ASUS", "MEW-VM", "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm" }, > > -- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info(a)coresystems.de • http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg • HRB 7656 Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

2 1

successful_crossflashing_S2466
by Oliver 20 Aug '09

20 Aug '09

Hi! After i had problems flashing a SST 49LF004B on an asus m2npv-vm my last chance was a Tyan Tiger S2466 board which i haven't tried so far. Because this board is not listed here: > http://www.coreboot.org/Flashrom#Supported_mainboards I want you to know that this board works fine out of the box with the latest flashrom release (r669). Feel free to add this board now to the supported_mainboard list The original chip used in this board is a Winbond W49V002AP. > root@security:~/flashrom# ./flashrom -w 1805.BIN > flashrom v0.9.0-r669 > No coreboot table found. > Found chipset "AMD AMD-768", enabling flash write... OK. > This chipset supports the following protocols: Non-SPI. > Calibrating delay loop... OK. > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... Programming page: 0007 at address: 0x00070000 > COMPLETE. > Verifying flash... VERIFIED. > root@security:~/flashrom# Oliver -- The choice of an -----==- open Oliver Niesner ----==-- _ generation devil.homelinux.org ---==---(_)__ __ ____ __ oli[at]rhce[dot]servebbs[dot]net --==---/ / _ \/ // /\ \/ / -=====/_/_//_/\_,_/ /_/\_\

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom