flashrom

flashrom@flashrom.org

3 participants
9189 discussions

flashrom on NetBSD 8 and apu2?
by Greg Troxel 03 Apr '21

03 Apr '21

I have a PC Engines apu2d4 running NetBSD 8 (amd64), and would like to update coreboot/etc. on it. I searched the list (perhaps not well) and didn't find any reports of success, although I realize things are generally expected to work so success might well go unreported. I am using flashrom 1.1 as built from pkgsrc. I was able to read the existing bios without issues as: flashrom --programmer internal -r 20200301-readflash.rom Before I try to write, I am wondering if anyone has successfully done an apu2 bios update with flashrom under NetBSD 8 amd64? (I have a debricking adaptor (spi1a) and will prepare a Linux flashing image on USB before trying myself, whether I not a get a report of success.) Thanks, Greg

1 1

Re: Fail flashing
by Mike Banon 01 Apr '21

01 Apr '21

Hi there GN, any news regarding your progress? btw please CC flashrom mailing list for your future replies, so that someone else could be able to help you as well On Sun, Mar 28, 2021 at 7:49 PM GN <giammi56(a)hotmail.com> wrote: > > Dear MIke, > > Thank you for you detailed answer, very much appreciated. > > Thank you for the clarification about the chips, I was getting crazy finding the right information about it. I will report the difference across all the posts I wrote on the issue :) > > The procedure in [1] is for a BBB. I will try to understand what can be transferred to the CH341a that I am using. For it, I found this interesting DIY, although according to the author the outputted voltage cannot be carefully controlled. > > I have tried to connect the power supplier to the naked motherboard while reading the Winbond chip. As predicted, the power LED on the CH341a lights on dimmed and it gets full-on when connected to the USB 3 port. Less obviously, flashrom cannot recognize the chip when the power supplier is connected. As I disconnect the power supplier, flashrom correctly recognizes the chip again, but the writing problems persist. > > > Bests regards, > > GN > > > On 25.03.21 14:39, Mike Banon wrote: > > I think the only way to prevent the current leaking to the surrounding > elements of a chip - is desoldering. So, if we are trying to avoid the > desoldering - yes, you could try reducing the length of wires between > a programmer and a test clip - i.e. to 10cm. That certainly wouldn't > hurt, and sometimes it really helps to achieve the successful flashing > by ISP (in-system programming) method. > > Please note: while there are some successful examples of using the > external PSU for an ISP flashing (i.e. this [1] BBB example at > libreboot wiki), depending on a motherboard design this could be > dangerous according to Angel Pons comments under [2] - so using the > external PSU should be avoided unless all the other options have been > tried and you still don't want to solder/desolder. > > While looking for the examples of L530 flashing I found a thread with > your comments [3]. To answer your question why the other people were > also targeting a ps08a chip: this is CMOS, and clearing a CMOS memory > sometimes is also important to ensure the successful boot of a > proprietary BIOS - but we haven't reached this stage yet, since we're > just trying to flash a BIOS into a SPI flash chip. > > Have you ever tested your CH341A before in other setups? If not, do > you have a spare CH341A to try it with a different one? And could you > try a higher powered USB port to ensure that your CH341A itself is > sufficiently powered? (i.e. you may be using a USB extender for your > convenience, which is fine - but that extender also shouldn't be too > long) > > [1] https://libreboot.org/docs/install/bbb_setup.html > [2] https://review.coreboot.org/c/flashrom/+/31830 > (this was my patch for the older version of flashrom useful in a > unreliable flashing setup, but I only successfully read with it and > never successfully wrote). > [3] https://www.badcaps.net/forum/showthread.php?t=61517 > > P.S. I'm not sure how you can measure the leakage with a multimeter, > and in any case knowing the exact values isn't necessary - when we > already know the cause of unsuccessful flashing and just need to find > out how to resolve it. > > > On Wed, Mar 24, 2021 at 8:46 PM G. Nalin <giammi56(a)hotmail.com> wrote: > > HI, > > I have been recommended to desolder the BIOS chip to use the CH341a reliably, but I would like to avoid it and use the clip instead! Should I simply cut shorter the clip wires? Is there something I can do to ground the motherboard or avoid the leaking? How can I measure it (I have just a multimeter here atm). > > I don´t know how to supply the power externally while the EEPROM is connected to the USB. Could you indicate me a reference? > > I tried to verify the dumo, but if fails because there is some writing involved. > $ sudo flashrom -V -p ch341a_spi -v bios1b.img > > I don´t have a reference so I can´t say if the HEX or BIN dump is actually at least partially valid. It is not all FF and 00. > > Cheers, > > Giammarco Nalin > > Handy: +4915252667614 > Adresse: Hausener Weg 96, 60489, Frankfurt am Main > > > ________________________________ > From: Mike Banon <mikebdp2(a)gmail.com> > Sent: 24 March 2021 13:40 > To: G. Nalin <giammi56(a)hotmail.com> > Cc: flashrom(a)flashrom.org <flashrom(a)flashrom.org> > Subject: Re: [flashrom] Fail flashing > > Could you please verify that at least a part of the binary file got > flashed correctly? If yes, these reliability problems could be caused > by your setup - i.e. too long wires or the surrounding elements of the > BIOS chip are drawing too much current - causing a voltage drop on the > chip itself and the remaining is insufficient for the reliable > flashing (in this case I could recommend using the external power > supply for 3.3V line) > > On Wed, Mar 24, 2021 at 9:50 AM G. Nalin <giammi56(a)hotmail.com> wrote: > > Hi all, > I am trying to flash a WInbond w25q64bv BIOS chip of a Thinkpad L530. I am on Ubuntu 20.04. Using a EEPROM ch341a and I am not able to copy correctly the content of the chip: diff and md5sum return all the time some errors. Trying to erase the chip gives random errors like > > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ch341a_spi. > Reading old flash chip contents... done. > Erasing and writing flash chip... FAILED at 0x000b6000! Expected=0xff, Found=0xae, failed byte count from 0x000b6000-0x000b6fff: 0x382 > ERASE FAILED! > > and so on. When I prompt the internal status I get: > > $sudo flashrom -V -p internal > > flashrom v1.2 on Linux 5.8.0-45-generic (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > flashrom was built with libpci 3.6.4, GCC 9.2.1 20200304, little endian > Command line (3 args): flashrom -V -p internal > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Initializing internal programmer > /sys/class/mtd/mtd0 does not exist > No coreboot table found. > Using Internal DMI decoder. > DMI string chassis-type: "Notebook" > Laptop detected via DMI. > DMI string system-manufacturer: "LENOVO" > DMI string system-product-name: "20AWS01V01" > DMI string system-version: "ThinkPad T440p" > DMI string baseboard-manufacturer: "LENOVO" > DMI string baseboard-product-name: "20AWS01V01" > DMI string baseboard-version: "0B98401 PRO" > W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. > Active config mode, unknown reg 0x20 ID: 00. > Found chipset "Intel QM87" with PCI ID 8086:8c4f. > This chipset is marked as untested. If you are using an up-to-date version > of flashrom *and* were (not) able to successfully update your firmware with it, > then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. > Thank you! > Enabling flash write... Root Complex Register Block address = 0xfed1c000 > GCS = 0xc21: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) > Top Swap: not enabled > 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > Maximum FWH chip size: 0x100000 bytes > SPI Read Configuration: prefetching enabled, caching enabled, > BIOS_CNTL = 0x2b: BIOS Lock Enable: enabled, BIOS Write Enable: enabled > Warning: BIOS region SMM protection is enabled! > Warning: Setting Bios Control at 0xdc from 0x2a to 0x09 failed. > New value is 0x2b. > SPIBAR = 0x00007f0d5db92000 + 0x3800 > 0x04: 0xe008 (HSFS) > HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 > SPI Configuration is locked down. > Reading OPCODES... done > 0x06: 0x0000 (HSFC) > HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 > 0x50: 0x00004a4b (FRAP) > BMWAG 0x00, BMRAG 0x00, BRWA 0x4a, BRRA 0x4b > 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-only. > 0x58: 0x0bff0500 FREG1: BIOS region (0x00500000-0x00bfffff) is read-write. > 0x5C: 0x04ff0003 FREG2: Management Engine region (0x00003000-0x004fffff) is locked. > 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. > Not all flash regions are freely accessible by flashrom. This is most likely > due to an active ME. Please see https://flashrom.org/ME for details. > 0x74: 0x8aaf0800 PR0: Warning: 0x00800000-0x00aaffff is read-only. > 0x78: 0x8ab00ab0 PR1: Warning: 0x00ab0000-0x00ab0fff is read-only. > 0x7C: 0x8adf0ab1 PR2: Warning: 0x00ab1000-0x00adffff is read-only. > 0x80: 0x8bff0b40 PR3: Warning: 0x00b40000-0x00bfffff is read-only. > At least some flash regions are read protected. You have to use a flash > layout and include only accessible regions. For write operations, you'll > additionally need the --noverify-all switch. See manpage for more details. > 0x90: 0xc0 (SSFS) > SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 > 0x91: 0xf94000 (SSFC) > SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=1 > 0x94: 0x0606 (PREOP) > 0x96: 0x3f90 (OPTYPE) > 0x98: 0x03003505 (OPMENU) > 0x9c: 0x9f20d802 (OPMENU+4) > 0xa0: 0x00000000 (BBAR) > 0xc4: 0x80802025 (LVSCC) > LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 > 0xc8: 0x80000000 (UVSCC) > UVSCC: BES=0x0, WG=0, WSR=0, WEWS=0, EO=0x0 > 0xd0: 0x50444653 (FPB) > Enabling hardware sequencing due to multiple flash chips detected. > OK. > The following protocols are supported: Programmer-specific. > Probing for Programmer Opaque flash chip, 0 kB: Hardware sequencing reports 2 attached SPI flash chips with a combined density of 12288 kB. > The first partition ranges from 0x000000 to 0x652fff. > In that range are 1619 erase blocks with 4096 B each. > The second partition ranges from 0x653000 to 0xbfffff. > In that range are 1453 erase blocks with 4096 B each. > Found Programmer flash chip "Opaque flash chip" (12288 kB, Programmer-specific) mapped at physical address 0x0000000000000000. > Found Programmer flash chip "Opaque flash chip" (12288 kB, Programmer-specific). > No operations were specified. > Restoring MMIO space at 0x7f0d5db958a0 > Restoring PCI config space for 00:1f:0 reg 0xdc > > /////////////////////////// > > $ sudo flashrom -V -p ch341a_spi > flashrom v1.2 on Linux 5.8.0-45-generic (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > flashrom was built with libpci 3.6.4, GCC 9.2.1 20200304, little endian > Command line (3 args): flashrom -V -p ch341a_spi > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Initializing ch341a_spi programmer > Device revision is 3.0.4 > The following protocols are supported: SPI. > > ...... > > Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ch341a_spi. > Chip status register is 0x00. > > This chip may contain one-time programmable memory. flashrom cannot read > and may never be able to write it, hence it may not be able to completely > clone the contents of this chip (see man page for details). > > > > Cheers, > > GN > > _______________________________________________ > flashrom mailing list -- flashrom(a)flashrom.org > To unsubscribe send an email to flashrom-leave(a)flashrom.org > > -- > Best regards, Mike Banon > Open Source Community Manager of 3mdeb - https://3mdeb.com/ > > -- > Best regards, Mike Banon > Open Source Community Manager of 3mdeb - https://3mdeb.com/ > > -- > Giammarco Nalin > > Handy: +4915252667614 > Adresse: Hausener Weg 96, 60489, Frankfurt am Main -- Best regards, Mike Banon Open Source Community Manager of 3mdeb - https://3mdeb.com/

1 0

Fail flashing
by G. Nalin 24 Mar '21

24 Mar '21

Hi all, I am trying to flash a WInbond w25q64bv BIOS chip of a Thinkpad L530. I am on Ubuntu 20.04. Using a EEPROM ch341a and I am not able to copy correctly the content of the chip: diff and md5sum return all the time some errors. Trying to erase the chip gives random errors like Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ch341a_spi. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x000b6000! Expected=0xff, Found=0xae, failed byte count from 0x000b6000-0x000b6fff: 0x382 ERASE FAILED! and so on. When I prompt the internal status I get: $sudo flashrom -V -p internal flashrom v1.2 on Linux 5.8.0-45-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.6.4, GCC 9.2.1 20200304, little endian Command line (3 args): flashrom -V -p internal Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing internal programmer /sys/class/mtd/mtd0 does not exist No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Notebook" Laptop detected via DMI. DMI string system-manufacturer: "LENOVO" DMI string system-product-name: "20AWS01V01" DMI string system-version: "ThinkPad T440p" DMI string baseboard-manufacturer: "LENOVO" DMI string baseboard-product-name: "20AWS01V01" DMI string baseboard-version: "0B98401 PRO" W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 00. Found chipset "Intel QM87" with PCI ID 8086:8c4f. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Root Complex Register Block address = 0xfed1c000 GCS = 0xc21: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap: not enabled 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled Maximum FWH chip size: 0x100000 bytes SPI Read Configuration: prefetching enabled, caching enabled, BIOS_CNTL = 0x2b: BIOS Lock Enable: enabled, BIOS Write Enable: enabled Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0x2a to 0x09 failed. New value is 0x2b. SPIBAR = 0x00007f0d5db92000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 SPI Configuration is locked down. Reading OPCODES... done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x50: 0x00004a4b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x4a, BRRA 0x4b 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x0bff0500 FREG1: BIOS region (0x00500000-0x00bfffff) is read-write. 0x5C: 0x04ff0003 FREG2: Management Engine region (0x00003000-0x004fffff) is locked. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see https://flashrom.org/ME for details. 0x74: 0x8aaf0800 PR0: Warning: 0x00800000-0x00aaffff is read-only. 0x78: 0x8ab00ab0 PR1: Warning: 0x00ab0000-0x00ab0fff is read-only. 0x7C: 0x8adf0ab1 PR2: Warning: 0x00ab1000-0x00adffff is read-only. 0x80: 0x8bff0b40 PR3: Warning: 0x00b40000-0x00bfffff is read-only. At least some flash regions are read protected. You have to use a flash layout and include only accessible regions. For write operations, you'll additionally need the --noverify-all switch. See manpage for more details. 0x90: 0xc0 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xf94000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=1 0x94: 0x0606 (PREOP) 0x96: 0x3f90 (OPTYPE) 0x98: 0x03003505 (OPMENU) 0x9c: 0x9f20d802 (OPMENU+4) 0xa0: 0x00000000 (BBAR) 0xc4: 0x80802025 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xc8: 0x80000000 (UVSCC) UVSCC: BES=0x0, WG=0, WSR=0, WEWS=0, EO=0x0 0xd0: 0x50444653 (FPB) Enabling hardware sequencing due to multiple flash chips detected. OK. The following protocols are supported: Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Hardware sequencing reports 2 attached SPI flash chips with a combined density of 12288 kB. The first partition ranges from 0x000000 to 0x652fff. In that range are 1619 erase blocks with 4096 B each. The second partition ranges from 0x653000 to 0xbfffff. In that range are 1453 erase blocks with 4096 B each. Found Programmer flash chip "Opaque flash chip" (12288 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Found Programmer flash chip "Opaque flash chip" (12288 kB, Programmer-specific). No operations were specified. Restoring MMIO space at 0x7f0d5db958a0 Restoring PCI config space for 00:1f:0 reg 0xdc /////////////////////////// $ sudo flashrom -V -p ch341a_spi flashrom v1.2 on Linux 5.8.0-45-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.6.4, GCC 9.2.1 20200304, little endian Command line (3 args): flashrom -V -p ch341a_spi Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing ch341a_spi programmer Device revision is 3.0.4 The following protocols are supported: SPI. ...... Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ch341a_spi. Chip status register is 0x00. This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Cheers, GN

2 1

Support for Pm25LQ020
by Balázs Vinarz 23 Mar '21

23 Mar '21

Hello there! The status is unknown in the latest version of flashrom. I couldn't erase the chip with any of the cha341a or internal (SB600) programmers. Probe and read are working. The logs for normal and debug mode for write operation are attached. The verbose log is 92MB. Regards

1 1

Re: About bios flash
by Mike Banon 19 Mar '21

19 Mar '21

Flashing BIOS chip is relatively easy, the end of this article shows how to do this with a cheap USB CH341A adapter supported by the opensource flashrom tool - http://dangerousprototypes.com/docs/Flashing_a_BIOS_chip_with_Bus_Pirate . However, hardware flashing a EC is more difficult - http://dangerousprototypes.com/docs/Flashing_KB9012_with_Bus_Pirate - especially if your EC isn't supported by flashrom. So it's preferable to update EC by a proprietary UEFI tool if you can't hardware flash it, but this could be done only if your laptop is already working. If your laptop reacts to a power button, chances are you don't have to touch your EC. Before flashing a BIOS image extracted from ASUS update utility, make sure you cut the correct 4MB (correct offset, looking at headers, and correct size). And in some cases you may need to populate some areas with IDs (i.e. MAC address of a laptop's Ethernet controller). You can learn more platform-specific info by looking them up online. On Fri, Mar 19, 2021 at 10:28 AM Aurelijus Gogas <a.a.grigonis(a)gmail.com> wrote: > > I downloaded from asus. And there is EC firmware update. I extracted. Size is 2MB. Flash chip size is 4MB. Are there some tricks for flashing like this files? > > Thanks > With Best Regards > Aurimas > > Get BlueMail for Android > On Mar 18, 2021, at 22:06, Mike Banon <mikebdp2(a)gmail.com> wrote: >> >> Hi there, 20cm wires is a bit long in my opinion - should be 10cm, but >> still - if your board is "hungry" - there may be a voltage drop and >> the resulting voltage level is insufficient for the successful >> flashing. As for "desoldered & flashed & soldered and nothing happens" >> - if you're confident your hardware is OK, then there may be an issue >> with a proprietary BIOS image that you are flashing, and I could only >> suggest searching for a good BIOS online or trying to extract it from >> a manufacturer's UEFI update utility if nothing helps. >> >> >> On Thu, Mar 18, 2021 at 7:45 PM Aurelijus Gogas <a.a.grigonis(a)gmail.com> wrote: >>> >>> >>> Hallo again. I flashed winbond bios on asus x54h only when desoldered. But when I soldered back, there was nothing. Even light on laptop not lighting. I flashed smaller bios file by adding in begin file difference ( coppied from bricked bios). >>> Are there some solutions? >>> Thanks for answer. >>> >>> With Best Regards >>> Aurimas >>> >>> Get BlueMail for Android >>> On Mar 2, 2021, at 18:47, Aurelijus Gogas <a.a.grigonis(a)gmail.com> wrote: >>>> >>>> >>>> I wired like schema. Resistors used like resistor divider signal-200 Om-to flash-200 Om-200 Om-GND. Wires are about 20cm. Wp, hold, vcc connected to 3.3v. when connected to external power supply, then flashrom wrote that is promblem with erase read or something. I wired SPI also as default pins (50-53)… and as schema (31-34). >>>> >>>> Thanks >>>> >>>> With Best Regards >>>> Aurimas >>>> >>>> Get BlueMail for Android >>>> On Mar 2, 2021, at 18:27, Mike Banon < mikebdp2(a)gmail.com> wrote: >>>>> >>>>> >>>>> BV should also work fine. Please could you describe your flashing >>>>> setup, length of wires etc. >>>>> >>>>> On Sun, Feb 28, 2021 at 10:41 PM Aurelijus Gogas <a.a.grigonis(a)gmail.com> wrote: >>>>> >>>>> >>>>>> >>>>>> >>>>>> Hallow, >>>>>> >>>>>> Thanks for your work (flashrom). In hardware list there is w25q32, but mine is BV. Flashrom can not detect my chip. Is it not supported or i am doing something wrong? I wired like example in tutorial. I have arduino mega2560. >>>>>> >>>>>> What i can do? >>>>>> >>>>>> Thanks for help. >>>>>> >>>>>> >>>>>> >>>>>> With Best Regards >>>>>> >>>>>> Aurimas >>>>>> >>>>>> >>>>>> >>>>>> Get BlueMail for Android >>>>>> >>>>>> >>>>>> >>>>>> ________________________________ >>>>>> >>>>>> >>>>>> flashrom mailing list -- flashrom(a)flashrom.org >>>>>> >>>>>> To unsubscribe send an email to flashrom-leave(a)flashrom.org >>>>> >>>>> >>>>> >>>>> >>>> >>>> >> -- Best regards, Mike Banon Open Source Community Manager of 3mdeb - https://3mdeb.com/

1 0

Re: About bios flash
by Mike Banon 18 Mar '21

18 Mar '21

Hi there, 20cm wires is a bit long in my opinion - should be 10cm, but still - if your board is "hungry" - there may be a voltage drop and the resulting voltage level is insufficient for the successful flashing. As for "desoldered & flashed & soldered and nothing happens" - if you're confident your hardware is OK, then there may be an issue with a proprietary BIOS image that you are flashing, and I could only suggest searching for a good BIOS online or trying to extract it from a manufacturer's UEFI update utility if nothing helps. On Thu, Mar 18, 2021 at 7:45 PM Aurelijus Gogas <a.a.grigonis(a)gmail.com> wrote: > > Hallo again. I flashed winbond bios on asus x54h only when desoldered. But when I soldered back, there was nothing. Even light on laptop not lighting. I flashed smaller bios file by adding in begin file difference ( coppied from bricked bios). > Are there some solutions? > Thanks for answer. > > With Best Regards > Aurimas > > Get BlueMail for Android > On Mar 2, 2021, at 18:47, Aurelijus Gogas <a.a.grigonis(a)gmail.com> wrote: >> >> I wired like schema. Resistors used like resistor divider signal-200 Om-to flash-200 Om-200 Om-GND. Wires are about 20cm. Wp, hold, vcc connected to 3.3v. when connected to external power supply, then flashrom wrote that is promblem with erase read or something. I wired SPI also as default pins (50-53)… and as schema (31-34). >> >> Thanks >> >> With Best Regards >> Aurimas >> >> Get BlueMail for Android >> On Mar 2, 2021, at 18:27, Mike Banon < mikebdp2(a)gmail.com> wrote: >>> >>> BV should also work fine. Please could you describe your flashing >>> setup, length of wires etc. >>> >>> On Sun, Feb 28, 2021 at 10:41 PM Aurelijus Gogas <a.a.grigonis(a)gmail.com> wrote: >>> >>> >>>> >>>> >>>> Hallow, >>>> >>>> Thanks for your work (flashrom). In hardware list there is w25q32, but mine is BV. Flashrom can not detect my chip. Is it not supported or i am doing something wrong? I wired like example in tutorial. I have arduino mega2560. >>>> >>>> What i can do? >>>> >>>> Thanks for help. >>>> >>>> >>>> >>>> With Best Regards >>>> >>>> Aurimas >>>> >>>> >>>> >>>> Get BlueMail for Android >>>> >>>> >>>> >>>> ________________________________ >>>> >>>> flashrom mailing list -- flashrom(a)flashrom.org >>>> >>>> To unsubscribe send an email to flashrom-leave(a)flashrom.org >>>> >>>> >>>> >>> >>> >>> -- Best regards, Mike Banon Open Source Community Manager of 3mdeb - https://3mdeb.com/

1 0

report of board support
by Kipp Cannon 18 Mar '21

18 Mar '21

Hi, Following the instructions here https://www.flashrom.org/Board_Testing_HOWTO I have been able to successfully extract the old ROM and flash a new ROM image to an Advantech SIMB-M22 motherboard. Follow the request on that page, I've attached the output of $ flashrom -p internal -V and $ lspci -nnvvxxx but not $ superiotool -deV because that tool isn't available on Debian at the moment. Thanks for the positive experience! -Kipp

1 0

New flash chip
by Marty E. Plummer 17 Mar '21

17 Mar '21

Just got my two PineCube dev kits in, flashrom told me to email you guys this information. --- flashrom v1.2 on Linux 5.10.21-200.fc33.x86_64 (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.6.4, GCC 10.2.1 20201125 (Red Hat 10.2.1-9), little endian Command line (5 args): flashrom -p ch341a_spi -w u-boot-sunxi-with-spl.bin -VV Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing ch341a_spi programmer Device revision is 3.0.4 The following protocols are supported: SPI. Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25DF021A, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25DL081, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25DL161, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25SF041, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25SF081, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25SF161, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25SF321, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT25SL128A, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ESI ES25P16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ESI ES25P40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ESI ES25P80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ESMT F25L32PA, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25P05, 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25P10, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25P16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25P20, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25P32, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25P40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25P64, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25P80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25B128B/GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25LQ128C/GD25LQ128D, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25LQ40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25LQ64(B), 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25LQ80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25Q127C/GD25Q128C, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25Q256D, 32768 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25VQ16C, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25VQ21B, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25VQ40C, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25VQ41B, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for GigaDevice GD25VQ80C, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ISSI IS25LP064, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ISSI IS25LP128, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ISSI IS25LP256, 32768 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ISSI IS25WP032, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ISSI IS25WP064, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ISSI IS25WP128, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ISSI IS25WP256, 32768 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX23L12854, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX23L1654, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX23L3254, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX23L6454, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L12805D, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L12835F/MX25L12845E/MX25L12865E, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L1605A/MX25L1606E/MX25L1608E, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L2005(C)/MX25L2006E, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L25635F/MX25L25645G, 32768 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L3206E/MX25L3208E, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L3273E, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L4005(A/C)/MX25L4006E, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L6405D, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L6406E/MX25L6408E, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E/MX25L6473F, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L6495F, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25L8005/MX25L8006E/MX25L8008E/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25R6435F, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25U12835F, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25U25635F, 32768 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25U51245G, 65536 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX25U8032E, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix MX66L51235F/MX25L51245G, 65536 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q00A..1G, 131072 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q00A..3G, 131072 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q256..1E, 32768 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q256..3E, 32768 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q512..1G, 65536 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron/Numonyx/ST N25Q512..3G, 65536 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron MT25QL01G, 131072 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron MT25QU01G, 131072 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron MT25QL02G, 262144 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron MT25QU02G, 262144 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron MT25QU128, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron MT25QL128, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron MT25QL256, 32768 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron MT25QU256, 32768 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron MT25QL512, 65536 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Micron MT25QU512, 65536 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LQ016, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LQ020, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LQ032C, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LQ040, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LQ080, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LV010, 128 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for SST SST25LF020A, 256 kB: probe_spi_rems: id1 0xb, id2 0x17 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for SST SST25VF010(A), 128 kB: probe_spi_rems: id1 0xb, id2 0x17 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0xb, id2 0x17 Probing for SST SST25VF020B, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xb, id2 0x17 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xb, id2 0x17 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25VF512(A), 64 kB: probe_spi_rems: id1 0xb, id2 0x17 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25WF020A, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25WF040B, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25WF080, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25WF080B, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST26VF016B(A), 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST26VF032B(A), 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST SST26VF064B(A), 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ST M95M02, 256 kB: probe_spi_st95: id1 0xff, id2 0xffff Probing for Sanyo LE25FU106B, 128 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FU206, 256 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FU206A, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Sanyo LE25FU406B, 512 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FU406C/LE25U40CMC, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Sanyo LE25FW106, 128 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Sanyo LE25FW406A, 512 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL127S-256kB, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL127S-64kB, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL128P......0, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL128P......1, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL128S......1, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL129P......0, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL129P......1, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL132K, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL164K, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL256S......0, 32768 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Spansion S25FL512S, 65536 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25P16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25P32, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25P80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q128.V..M, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q128.W, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q128.JW.DTR, 16384 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q256.V, 32768 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q256JV_M, 32768 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q40.V, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q40BW, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q40EW, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q80BW, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25Q80EW, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Zetta Device ZD25D20, 256 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Zetta Device ZD25D40, 512 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Unknown SFDP-capable chip, 0 kB: SFDP revision = 1.0 SFDP number of parameter headers is 2 (NPH = 1). SFDP parameter table header 0/1: ID 0x00, version 1.0 Length 36 B, Parameter Table Pointer 0x000030 Parsing JEDEC flash parameter table... 3-Byte only addressing. Status register is non-volatile and the standard does not allow vendors to tell us whether EWSR/WREN is needed for status register writes - assuming EWSR. Write chunk size is at least 64 B. Flash chip size is 16384 kB. Block eraser 0: 4096 x 4096 B with opcode 0x20 Tried to add a duplicate block eraser: 4096 x 4096 B with opcode 0x20. Block eraser 1: 512 x 32768 B with opcode 0x52 Block eraser 2: 256 x 65536 B with opcode 0xd8 done. SFDP parameter table header 1/1: ID 0x0b, version 1.0 Length 12 B, Parameter Table Pointer 0x000060 === SFDP has autodetected a flash chip which is not natively supported by flashrom yet. All standard operations (read, verify, erase and write) should work, but to support all possible features we need to add them manually. You can help us by mailing us the output of the following command to flashrom(a)flashrom.org: 'flashrom -VV [plus the -p/--programmer parameter]' Thanks for your help! === Found Unknown flash chip "SFDP-capable chip" (16384 kB, SPI) on ch341a_spi. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x0b, id2 0x4018 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xb, id2 0x17 Found Unknown flash chip "SFDP-capable chip" (16384 kB, SPI). Error: Image size (16384 B) doesn't match the flash chip's size (16777216 B)! ---

1 0

HP chromebook 11 g4 - dead
by Blah Mbah 04 Mar '21

04 Mar '21

sudo ./flashrom -p ch341a_spi -w backup_folder/coreboot_tiano-kip-mrchromebox_20200604.rom [sudo] šifra za eeepc: flashrom v1.2-99-gfbb2b25f61 on Linux 5.4.0-65-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found Winbond flash chip "W25Q64.W" (8192 kB, SPI) on ch341a_spi. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x000008f4! Expected=0xff, Found=0xfe, failed byte count from 0x00000000-0x00000fff: 0x2 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x0000020b! Expected=0xff, Found=0xdf, failed byte count from 0x00000000-0x00007fff: 0x3 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x0000020b! Expected=0xff, Found=0xdf, failed byte count from 0x00000000-0x0000ffff: 0x6 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x000005c5! Expected=0xff, Found=0xfd, failed byte count from 0x00000000-0x007fffff: 0x360 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x000009cd! Expected=0xff, Found=0xfd, failed byte count from 0x00000000-0x007fffff: 0x37b ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Looking for another erase function. Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Apparently at least some data has changed. Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! eeepc@eeepc-1005:~/ressurect$ sudo ./flashrom -p ch341a_spi [sudo] šifra za eeepc: flashrom v1.2-99-gfbb2b25f61 on Linux 5.4.0-65-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found Winbond flash chip "W25Q64.W" (8192 kB, SPI) on ch341a_spi. No operations were specified. eeepc@eeepc-1005:~/ressurect$

2 1

Flashrom & Serprog Question
by egeebt00＠gmail.com 02 Mar '21

02 Mar '21

Hello again. Posted this question in irc, but had to disconnect, thats why i ask here. I build Urja Rannikko's atmega644 programmer and used it with flashrom 0.9.9 on windows. If i do not connect a flash chip (only parallel flash chips here to test) to the programmer i get the messages that bus mode parallel and spi are on (lpc and hw off). When i connect a SST39VF040 to the programmer and execute flashrom the parallel mode is changed to off, so only spi is on. Can i force the programmer / flashrom to check only for flash chips in parallel mode (with a parameter e.g.)? I did notice, that i had the wrong jumper position set for the flash chip (5V instead of 3,3V). Is it possible that this is the reason why flashrom switches to spi? I'm pretty sure that the flash chip is dead now, but i have two more of this type :). Hope someone can help.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom