flashrom

flashrom@flashrom.org

1 participants
9187 discussions

ASUS M2N-MX : flashrom -V
by Alexandru Balaban 02 Jan '12

02 Jan '12

root@wst:~# flashrom -V flashrom v0.9.4-r1394 on Linux 3.0.0-1-686-pae (i686), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1011M loops per second, 10 myus = 11 us, 100 myus = 94 us, 1000 myus = 917 us, 10000 myus = 12822 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "ASUSTeK Computer INC." DMI string system-product-name: "M2N-MX" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M2N-MX" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8712 on port 0x2e Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Flash bus type is LPC Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0xa0000000 Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: LPC. Super I/O ID 0x8712 is not on the list of flash capable controllers. Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Found SST flash chip "SST49LF040B" (512 kB, LPC) at physical address 0xfff80000. Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50 === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! No operations were specified. Restoring PCI config space for 00:01:0 reg 0x6d Restoring PCI config space for 00:01:0 reg 0x90 Restoring PCI config space for 00:01:0 reg 0x8c Restoring PCI config space for 00:01:0 reg 0x88

1 0

Re: [flashrom] Shuttle AV18S403 erase and write pass
by Stefan Tauner 02 Jan '12

02 Jan '12

On Mon, 2 Jan 2012 10:56:42 +0100 Piotr Król <pietrushnic(a)gmail.com> wrote: > Yes, you're right it is a motherboard AV18E2 with updated BIOS. I think > about > try to write support for coreboot for this board, although I have yet to > learn a > lot. > OK, thank you for the reply. I have added the board to our list and marked the north and south bridge tested as well. I will commit all of this later. GL with coreboot... afaics that would be quite some work though. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

chipset:via vt8237 motherboard: p4m800pro-m v2.0 SUCCESS
by CHRIS HONEYCUTT 02 Jan '12

02 Jan '12

linux-poa8:/home/chris/Desktop # flashrom -V -w 070830s.ROM flashrom v0.9.3-r1246 on Linux 2.6.37.1-1.2-default (i686), built with libpci 3.1.7, GCC 4.5.1 20101208 [gcc-4_5-branch revision 167585], little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1772M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 986 us, 10000 myus = 9997 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "ECS" DMI string system-product-name: "P4M800PRO-M" DMI string system-version: "1.0" DMI string baseboard-manufacturer: "ECS" DMI string baseboard-product-name: "P4M800PRO-M" DMI string baseboard-version: "1.0" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8718. Found chipset "VIA VT8237", enabling flash write... chipset PCI ID is 1106:3227, OK. This chipset supports the following protocols: Non-SPI. No IT87* serial flash segment enabled. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT49F020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Bright BM29F040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Hyundai HY29F002T, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Hyundai HY29F002B, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Hyundai HY29F040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Intel 28F001BN/BX-T, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: probe_82802ab: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L1635E, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for MoselVitelic V29C51000T, 64 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for MoselVitelic V29C51400B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for MoselVitelic V29C51400T, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for MoselVitelic V29LC51000, 64 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for MoselVitelic V29LC51001, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for MoselVitelic V29LC51002, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for Spansion S25FL032A, 4096 KB: skipped. Probing for Spansion S25FL064A, 8192 KB: skipped. Probing for SST SST25VF010.REMS, 128 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M25PX32, 4096 KB: skipped. Probing for ST M25PX64, 8192 KB: skipped. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x05, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xfa, id2 0x2b, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W29C020(C)/W29C022, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W29C040/P, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040C, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040FB, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040FC, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W49F020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V080FA, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Flash image seems to be a legacy BIOS. Disabling checks. Reading old flash chip contents... Erasing and writing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff:E, 0x001000-0x001fff:E, 0x002000-0x002fff:EW, 0x003000-0x003fff:EW, 0x004000-0x004fff:EW, 0x005000-0x005fff:EW, 0x006000-0x006fff:EW, 0x007000-0x007fff:EW, 0x008000-0x008fff:EW, 0x009000-0x009fff:EW, 0x00a000-0x00afff:EW, 0x00b000-0x00bfff:EW, 0x00c000-0x00cfff:EW, 0x00d000-0x00dfff:EW, 0x00e000-0x00efff:EW, 0x00f000-0x00ffff:EW, 0x010000-0x010fff:EW, 0x011000-0x011fff:EW, 0x012000-0x012fff:EW, 0x013000-0x013fff:EW, 0x014000-0x014fff:EW, 0x015000-0x015fff:EW, 0x016000-0x016fff:EW, 0x017000-0x017fff:EW, 0x018000-0x018fff:EW, 0x019000-0x019fff:EW, 0x01a000-0x01afff:EW, 0x01b000-0x01bfff:EW, 0x01c000-0x01cfff:EW, 0x01d000-0x01dfff:EW, 0x01e000-0x01efff:EW, 0x01f000-0x01ffff:EW, 0x020000-0x020fff:EW, 0x021000-0x021fff:EW, 0x022000-0x022fff:EW, 0x023000-0x023fff:EW, 0x024000-0x024fff:EW, 0x025000-0x025fff:EW, 0x026000-0x026fff:EW, 0x027000-0x027fff:EW, 0x028000-0x028fff:EW, 0x029000-0x029fff:EW, 0x02a000-0x02afff:EW, 0x02b000-0x02bfff:EW, 0x02c000-0x02cfff:EW, 0x02d000-0x02dfff:EW, 0x02e000-0x02efff:EW, 0x02f000-0x02ffff:EW, 0x030000-0x030fff:EW, 0x031000-0x031fff:EW, 0x032000-0x032fff:EW, 0x033000-0x033fff:EW, 0x034000-0x034fff:EW, 0x035000-0x035fff:EW, 0x036000-0x036fff:EW, 0x037000-0x037fff:EW, 0x038000-0x038fff:EW, 0x039000-0x039fff:EW, 0x03a000-0x03afff:EW, 0x03b000-0x03bfff:EW, 0x03c000-0x03cfff:EW, 0x03d000-0x03dfff:EW, 0x03e000-0x03efff:EW, 0x03f000-0x03ffff:EW, 0x040000-0x040fff:EW, 0x041000-0x041fff:EW, 0x042000-0x042fff:EW, 0x043000-0x043fff:EW, 0x044000-0x044fff:EW, 0x045000-0x045fff:EW, 0x046000-0x046fff:EW, 0x047000-0x047fff:EW, 0x048000-0x048fff:EW, 0x049000-0x049fff:EW, 0x04a000-0x04afff:EW, 0x04b000-0x04bfff:EW, 0x04c000-0x04cfff:EW, 0x04d000-0x04dfff:EW, 0x04e000-0x04efff:EW, 0x04f000-0x04ffff:EW, 0x050000-0x050fff:EW, 0x051000-0x051fff:EW, 0x052000-0x052fff:EW, 0x053000-0x053fff:EW, 0x054000-0x054fff:EW, 0x055000-0x055fff:EW, 0x056000-0x056fff:EW, 0x057000-0x057fff:EW, 0x058000-0x058fff:EW, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:EW, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:E, 0x06d000-0x06dfff:E, 0x06e000-0x06efff:E, 0x06f000-0x06ffff:E, 0x070000-0x070fff:EW, 0x071000-0x071fff:EW, 0x072000-0x072fff:EW, 0x073000-0x073fff:EW, 0x074000-0x074fff:EW, 0x075000-0x075fff:EW, 0x076000-0x076fff:EW, 0x077000-0x077fff:EW, 0x078000-0x078fff:EW, 0x079000-0x079fff:EW, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:EW, 0x07f000-0x07ffff:EW Done. Verifying flash... VERIFIED. Restoring PCI config space for 00:11:0 reg 0x59 Restoring PCI config space for 00:11:0 reg 0x40 Restoring PCI config space for 00:11:0 reg 0x41

1 0

Re: [flashrom] Shuttle AV18S403 erase and write pass
by Stefan Tauner 02 Jan '12

02 Jan '12

On Fri, 30 Dec 2011 14:11:39 +0100 Piotr Król <pietrushnic(a)gmail.com> wrote: > Hi, > I tested this motherboard for erase and write and everything seems to work > properly. > Logs in attachments. > flashrom -V > flashrom -VE > flashrom -Vw bios_bckp.bin > lspci -nnvvxxx > superiotool -deV - http://paste.flashrom.org/view.php?id=993 Hello Piotr, thanks for your report! Looks like it is working and we can mark some stuff tested, great. One question though... there is no board named AV18S403 according to the interwebs, but there is a firmware update named like that for a board called AV18E2 (v4.0): http://www.shuttle.eu/_archive/older/de/av18_faq.htm#download So i guess you really meant AV18E2? See also http://www.shuttle.eu/_archive/older/de/av18.htm#versionen -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] [FLASHROM] Asus P8Z68-V Pro motherboard
by Stefan Tauner 02 Jan '12

02 Jan '12

On Sun, 1 Jan 2012 23:22:18 +0100 Ob Noxious <obnox3(a)gmail.com> wrote: > 0x5C: 0x017f0003 (FREG2: Management Engine) > 0x00003000-0x0017ffff is locked Hello Ob, thanks for your report! The problem is the locked ME region as quoted above. We are working on unlocking it, but intel does not provide us any documentation so please do not expect a solution soon. I have added the board to our list of (un)supported boards (with an appropriate note) and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] SUCCESS - NVIDIA MCP61 (10de:03e1)
by Stefan Tauner 02 Jan '12

02 Jan '12

Hello Lee, thanks for your report! I have added the mainboard to our list of supported boards and will commit that later together with other small changes. On Mon, 26 Dec 2011 11:10:27 -0600 Lee Daugherty <leewdaugherty(a)gmail.com> wrote: > Found chipset "NVIDIA MCP61" with PCI ID 10de:03e1. > This chipset is marked as untested. If you are using an up-to-date version > of flashrom please email a report to flashrom(a)flashrom.org including a > verbose (-V) log. Thank you! This is already marked as tested in svn or locally in my branch. > WARNING: unexpected second chipset match: "NVIDIA MCP61" hm that's interesting... can you please post a log of lspci -nnvvvxxx? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[FLASHROM] Asus P8Z68-V Pro motherboard
by Ob Noxious 01 Jan '12

01 Jan '12

Hi, According to flashrom output, please attached the debug output as suggested by the tool. There are 2 versions for the 2 available verbosity levels. Hope it helps :-) -- ObNox

1 0

MSI K9N2 SLI Platinum - MCP SPI flashrom information dumps
by Alistair Tonner 31 Dec '11

31 Dec '11

One zip file containing 3 output files from : ./flashrom -V lspci -nnvvvxxx superiotool -deV commands. - in dmidecode this board is shown as: MS-7374 The bios update can be found at: http://www.msi.com/service/download/bios-14652.html I'm looking to see if I can setup some sort of backup on this -- If I can I will try the flash and report results.

1 0

Re: [flashrom] Difference of factory bios and dumped image
by Prakash Punnoor 31 Dec '11

31 Dec '11

On Saturday 31 December 2011 13:55:45 Idwer Vollering wrote: > 2011/12/31 Prakash Punnoor <prakashp(a)arcor.de>: > > On 31.12.2011 11:39, Paul Menzel wrote: > >> Am Samstag, den 31.12.2011, 10:55 +0100 schrieb Prakash Punnoor: > >>> flashrom v0.9.4-r1395 on Linux 3.2.0-rc7+ (x86_64), built with > >>> libpci 3.1.7, GCC 4.5.2, little endian > >>> flashrom is free software, get the source code at > >>> http://www.flashrom.org > >>> > >>> Calibrating delay loop... OK. > >>> Found chipset "AMD SB700/SB710/SB750/SB850". Enabling flash write... > >>> OK. This chipset supports the following protocols: LPC, FWH, SPI. > >>> Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical > >>> address 0xfff00000. > >>> No operations were specified. > >> > >> Unfortunately this question seems not be listed in the FAQ. Most of > >> the > >> time some areas differ because the MAC address and other configuration > >> data of the downloaded images differs [2]. I hope you mean the > >> downloaded image by factory/vendor image. > > > > To clarify: > > - Image I got from vendor web page: Flashed with flashrom won't work > > (machine doesn't POST). Flashed with awdflash works. > > Is the bootblock in the downloaded image intact/present? You can use > bios_extract: http://cgit.freedesktop.org/~libv/bios_extract I don't know how to find that out. This is the output: Found Award BIOS. 0x30000 ( 75940 bytes) -> 8a660a1a.BIN (131072 bytes) 0x428A6 ( 37836 bytes) -> awardext.rom ( 53520 bytes) 0x4BC73 ( 13651 bytes) -> ACPITBL.BIN ( 30519 bytes) 0x4F1C7 ( 25463 bytes) -> awardeyt.rom ( 50864 bytes) 0x5553F ( 11719 bytes) -> _EN_CODE.BIN ( 26512 bytes) 0x58307 ( 3989 bytes) -> _ITEM.BIN ( 9600 bytes) 0x5929D ( 5657 bytes) -> _DMI.BIN ( 9456 bytes) 0x5A8B7 ( 3396 bytes) -> SPIFLASH.BIN ( 9184 bytes) 0x5B5FC ( 581 bytes) -> SMI32COD.BIN ( 736 bytes) 0x5B842 ( 1105 bytes) -> SMIAPCOD.BIN ( 34784 bytes) 0x5BC94 ( 38294 bytes) -> ROMs\VBIOS\13B27721.019 ( 60416 bytes) 0x6522B ( 33303 bytes) -> ROMs\SRAID_33.BIN ( 52224 bytes) 0x6D443 ( 9230 bytes) -> HFSROM.BIN ( 13824 bytes) 0x6F852 ( 34171 bytes) -> ROMs\8056.LOM ( 55808 bytes) 0x77DCE ( 75010 bytes) -> HFSXROM.DLL (135168 bytes) 0x8A2D1 ( 26405 bytes) -> AHCI.BIN ( 27648 bytes) 0x909F7 ( 11355 bytes) -> AGESACPU.ROM ( 34424 bytes) 0xA6E69 ( 5511 bytes) -> ROMs\AMD940.BMP (307980 bytes) The output from the dumped file looks the same, btw. > What happens when you reset the CMOS/ESCD data after flashing with > flashrom? awdflash does that with the /cp parameter, see > http://www.plasma-online.de/textual/howto/flash_award.html I will try that, if you can confirm that the image contains a boot block. > Do you have a POST card? You can get one off dealextreme.. > http://www.dealextreme.com/p/pc-motherboard-repair-troubleshoot-boot-failure > -diagnostic-pci-card-21997 Good idea. I ordered one (from a different place, as i live in Germany). Thanks, Prakash

1 0

Difference of factory bios and dumped image
by Prakash Punnoor 31 Dec '11

31 Dec '11

Hi, flashrom kind of works on my system, but not with the factory images. If I read it out with flashrom and write it back with flashrom (also to a different chip) it works. The sizes of factory and dumped image are same but they are somewhat binary different. Any idea? The motherboard is Abit A-S78H. As I am playing around with coreboot - so far unsuccessfully - I want to know whether flashrom is writing the generated image correctly... I can upload both images somewhere if interested. This is flashrom output on my system: flashrom v0.9.4-r1395 on Linux 3.2.0-rc7+ (x86_64), built with libpci 3.1.7, GCC 4.5.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "AMD SB700/SB710/SB750/SB850". Enabling flash write... OK. This chipset supports the following protocols: LPC, FWH, SPI. Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. No operations were specified. Regards, Prakash

4 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom