flashrom

flashrom@flashrom.org

3 participants
9188 discussions

Re: [flashrom] Flashrom -V Report for motherboard Asustek M4N68T-V2
by Stefan Tauner 14 May '12

14 May '12

On Sat, 12 May 2012 14:25:00 +0200 Jean-Christophe CHARRON <jeanchristophe.charron(a)gmail.com> wrote: > Thanks Stefan ,working well with 0.9.5 version. Thanks for your report! I have added the board to our list and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] test Asus P8H61 B3
by Stefan Tauner 14 May '12

14 May '12

On Wed, 9 May 2012 23:47:18 +0200 Laure-Hélène Bruneton <laure.helene.bruneton(a)gmail.com> wrote: > Could you tell me if it's okay to use flashrom to upgrade my BIOS please? at least there is no clear indication that it would not work. you have to try to be sure. if you do, please report back, thanks. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Test report Biostar M7VIQ - Chip now detected, reading works
by Stefan Tauner 14 May '12

14 May '12

On Tue, 15 May 2012 01:53:53 +0200 Gurken Papst <gurken.papst(a)gmail.com> wrote: > Ok, here is the new result. I suppose the line "Found Winbond Super > I/O, id 60" is telling me detection is working as expected? thanks! i don't know if it is working as expected (i haven't looked at the code), but that's the interesting part of the output, yes. we want to finally integrate a log file functionality into flashrom soon, so it is possible that the next version of the superio patch will take a while. but afaict carl-daniel is quite interesting in improving that part, so there surely will be some progress :) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

DQ965GF
by gabris 14 May '12

14 May '12

Hello, as written in flashrom I'm sending verbose log which is from Intel DQ965GF motherboard running Q965, Mandriva 2010.2 as OS. it has SST25VF016B Bioschip. flashrom v0.9.5.2-r1515 on Linux 2.6.33.7-desktop-2mnb (i686), built with libpci 3.1.7, GCC 4.6.1 20110627 (Mandriva), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1852M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1004 us, 10000 myus = 10143 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: "Intel Corporation" DMI string baseboard-product-name: "DQ965GF" DMI string baseboard-version: "AAD41676-400" DMI string chassis-type: "Desktop" Found chipset "Intel ICH8DO" with PCI ID 8086:2814. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0xa WARNING: Setting 0xdc from 0xa to 0xb on ICH8DO failed. New value is 0xa. Root Complex Register Block address = 0xfed1c000 GCS = 0x464: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done 0x06: 0x3f00 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=63, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x01ff0120 FREG1: BIOS region (0x00120000-0x001fffff) is read-write. 0x5C: 0x011f0003 FREG2: WARNING: Management Engine region (0x00003000-0x0011ffff) is locked. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. 0x64: 0x00000000 FREG4: WARNING: Platform Data region (0x00000000-0x00000fff) is locked. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. 0x90: 0x00 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0x004200 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=2, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x0008 (OPTYPE) 0x98: 0x0000ab9f (OPMENU) 0x9C: 0x00000000 (OPMENU+4) 0xC1: 0xffffffff (VSCC) VSCC: BES=0x3, WG=1, WSR=1, WEWS=1, EO=0xff, VCL=1 Enabling hardware sequencing because some important opcode is locked. SPI Read Configuration: prefetching enabled, caching enabled, PROBLEMS, continuing anyway The following protocols are supported: FWH, Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found 1 attached SPI flash chip with a density of 2048 kB. There is only one partition containing the whole address space (0x000000 - 0x1fffff). There are 512 erase blocks with 4096 B each. Found Programmer flash chip "Opaque flash chip" (2048 kB, Programmer-specific) at physical address 0x0. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x4b, id2 0x93, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x5a, id2 0x47, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x4b, id2 0x93, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x5a, id2 0x47, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x4b, id2 0x93, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x0c, id2 0xe1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x5a, id2 0x47, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x5a, id2 0x47, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x5a, id2 0x47, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x5a, id2 0x47, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x4b, id2 0x93, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x5a, id2 0x47, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x5a, id2 0x47, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x5a, id2 0x47, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x5a, id2 0x47, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x4b, id2 0x93, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x5a, id2 0x47, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Programmer flash chip "Opaque flash chip" (2048 kB, Programmer-specific). No operations were specified. Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Re: [flashrom] Test report Medion MD5000 V1.2 (MSI MS-6701) - Chip not detected
by Gurken Papst 14 May '12

14 May '12

New result with Winbond Super IO detection patch: flashrom v0.9.5.2-r1534 on Linux 3.2.0-23-generic-pae (i686), built with libpci 3.0.0, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1725M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1002 us, 10000 myus = 9944 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "MEDIONPC" DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: "MICRO-STAR INTERNATIONAL CO., LTD" DMI string baseboard-product-name: "MS-6701" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found Winbond Super I/O, id 60 Found chipset "SiS 648" with PCI ID 1039:0648. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Found southbridge 1039:0963 at 00:02:0 OK. The following protocols are supported: Non-SPI. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0xffff, id2 0x00ff Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. Restoring PCI config space for 00:02:0 reg 0x45 Restoring PCI config space for 00:02:0 reg 0x40

1 0

Re: [flashrom] Test report Biostar M7VIQ - Chip now detected, reading works
by Stefan Tauner 14 May '12

14 May '12

On Mon, 30 Apr 2012 14:15:49 +0200 Gurken Papst <gurken.papst(a)gmail.com> wrote: > On Sat, Apr 28, 2012 at 01:24, Stefan Tauner > <stefan.tauner(a)student.tuwien.ac.at> wrote: > > i have hacked it into something that might work for your board; the > > generalization can happen later. i will reply to this mail with two > > patches. please apply them to SVN HEAD and try to probe and read, but > > not erase/write yet please. > > Nice job, detection and reading are working. Dumps from UniFlash and > Flashrom are equal. > > Output of flashrom -V -r m7viq_flashrom.img: > > […] > Do you need any additional information? carl-daniel is working on a generic patch that detects the winbond automatically and should then enable all similar boards (like your medion board). imho writing should work on your board too, so if there is a reason to upgrade the bios, feel free to test it. else please wait for carl-daniel's generic patch that he will send soonish (dont hold your breath ;) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

[PATCH] Clean up msg_*
by Carl-Daniel Hailfinger 14 May '12

14 May '12

Convert printf to msg_* where appropriate. Clean up cli_output.c to be more readable. Use enum instead of #define for message levels. Kill a few exit(0) calls. Print the command line arguments in verbose mode. Move actions (--list-supported etc.) after argument sanity checks. Reduce the number of code paths which have their own programmer_shutdown(). Note: This patch was formerly part of the logfile patch, but that made review harder. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-message_reorg/flash.h =================================================================== --- flashrom-message_reorg/flash.h (Revision 1534) +++ flashrom-message_reorg/flash.h (Arbeitskopie) @@ -269,12 +269,14 @@ /* cli_output.c */ /* Let gcc and clang check for correct printf-style format strings. */ -int print(int type, const char *fmt, ...) __attribute__((format(printf, 2, 3))); -#define MSG_ERROR 0 -#define MSG_INFO 1 -#define MSG_DEBUG 2 -#define MSG_DEBUG2 3 -#define MSG_BARF 4 +enum msglevel { + MSG_ERROR = 0, + MSG_INFO = 1, + MSG_DEBUG = 2, + MSG_DEBUG2 = 3, + MSG_BARF = 4, +}; +int print(enum msglevel level, const char *fmt, ...) __attribute__((format(printf, 2, 3))); #define msg_gerr(...) print(MSG_ERROR, __VA_ARGS__) /* general errors */ #define msg_perr(...) print(MSG_ERROR, __VA_ARGS__) /* programmer errors */ #define msg_cerr(...) print(MSG_ERROR, __VA_ARGS__) /* chip errors */ Index: flashrom-message_reorg/cli_output.c =================================================================== --- flashrom-message_reorg/cli_output.c (Revision 1534) +++ flashrom-message_reorg/cli_output.c (Arbeitskopie) @@ -22,34 +22,25 @@ #include <stdarg.h> #include "flash.h" -int print(int type, const char *fmt, ...) +/* Please note that level is the verbosity, not the importance of the message. */ +int print(enum msglevel level, const char *fmt, ...) { va_list ap; - int ret; - FILE *output_type; + int ret = 0; + FILE *output_type = stdout; - switch (type) { - case MSG_ERROR: + if (level == MSG_ERROR) output_type = stderr; - break; - case MSG_BARF: - if (verbose < 3) - return 0; - case MSG_DEBUG2: - if (verbose < 2) - return 0; - case MSG_DEBUG: - if (verbose < 1) - return 0; - case MSG_INFO: - default: - output_type = stdout; - break; - } - va_start(ap, fmt); - ret = vfprintf(output_type, fmt, ap); - va_end(ap); - fflush(output_type); + if (level <= verbose) { + va_start(ap, fmt); + ret = vfprintf(output_type, fmt, ap); + va_end(ap); + /* msg_*spew usually happens inside chip accessors in possibly + * time-critical operations. Don't slow them down by flushing. + */ + if (level != MSG_BARF) + fflush(output_type); + } return ret; } Index: flashrom-message_reorg/cli_classic.c =================================================================== --- flashrom-message_reorg/cli_classic.c (Revision 1534) +++ flashrom-message_reorg/cli_classic.c (Arbeitskopie) @@ -377,20 +377,31 @@ cli_classic_abort_usage(); } - /* FIXME: Print the actions flashrom will take. */ - - if (list_supported) { - print_supported(); - exit(0); + if ((read_it | write_it | verify_it) && !filename) { + fprintf(stderr, "Error: No filename specified.\n"); + cli_classic_abort_usage(); } + if (filename && (filename[0] == '\0')) { + fprintf(stderr, "Error: No filename specified.\n"); + cli_classic_abort_usage(); + } + if (filename && (filename[0] == '-')) + fprintf(stderr, "Warning: Supplied file name starts with -\n"); #if CONFIG_PRINT_WIKI == 1 if (list_supported_wiki) { print_supported_wiki(); - exit(0); + ret = 0; + goto out; } #endif + if (list_supported) { + print_supported(); + ret = 0; + goto out; + } + if (layoutfile && read_romlayout(layoutfile)) cli_classic_abort_usage(); if (process_include_args()) @@ -415,11 +426,17 @@ if (prog == PROGRAMMER_INVALID) prog = default_programmer; + msg_gdbg("Command line:"); + for (i = 0; i < argc; i++) { + msg_gdbg(" %s", argv[i]); + } + msg_gdbg("\n"); + /* FIXME: Delay calibration should happen in programmer code. */ myusec_calibrate_delay(); if (programmer_init(prog, pparam)) { - fprintf(stderr, "Error: Programmer initialization failed.\n"); + msg_perr("Error: Programmer initialization failed.\n"); ret = 1; goto out_shutdown; } @@ -442,25 +459,25 @@ } if (chipcount > 1) { - printf("Multiple flash chips were detected: \"%s\"", - flashes[0].name); + msg_cinfo("Multiple flash chips were detected: \"%s\"", + flashes[0].name); for (i = 1; i < chipcount; i++) - printf(", \"%s\"", flashes[i].name); - printf("\nPlease specify which chip to use with the " - "-c <chipname> option.\n"); + msg_cinfo(", \"%s\"", flashes[i].name); + msg_cinfo("\nPlease specify which chip to use with the -c " + "<chipname> option.\n"); ret = 1; goto out_shutdown; } else if (!chipcount) { - printf("No EEPROM/flash device found.\n"); + msg_cinfo("No EEPROM/flash device found.\n"); if (!force || !chip_to_probe) { - printf("Note: flashrom can never write if the flash " - "chip isn't found automatically.\n"); + msg_cinfo("Note: flashrom can never write if the flash " + "chip isn't found automatically.\n"); } if (force && read_it && chip_to_probe) { struct registered_programmer *pgm; int compatible_programmers = 0; - printf("Force read (-f -r -c) requested, pretending " - "the chip is there:\n"); + msg_cinfo("Force read (-f -r -c) requested, pretending " + "the chip is there:\n"); /* This loop just counts compatible controllers. */ for (j = 0; j < registered_programmer_count; j++) { pgm = &registered_programmers[j]; @@ -468,9 +485,9 @@ compatible_programmers++; } if (compatible_programmers > 1) - printf("More than one compatible controller " - "found for the requested flash chip, " - "using the first one.\n"); + msg_cinfo("More than one compatible controller " + "found for the requested flash chip, " + "using the first one.\n"); for (j = 0; j < registered_programmer_count; j++) { pgm = &registered_programmers[j]; startchip = probe_flash(pgm, 0, &flashes[0], 1); @@ -478,14 +495,15 @@ break; } if (startchip == -1) { - printf("Probing for flash chip '%s' failed.\n", - chip_to_probe); + msg_cinfo("Probing for flash chip '%s' failed." + "\n", chip_to_probe); ret = 1; goto out_shutdown; } - printf("Please note that forced reads most likely " - "contain garbage.\n"); - return read_flash_to_file(&flashes[0], filename); + msg_cinfo("Please note that forced reads most likely " + "contain garbage.\n"); + ret = read_flash_to_file(&flashes[0], filename); + goto out_shutdown; } ret = 1; goto out_shutdown; @@ -505,23 +523,17 @@ size = fill_flash->total_size * 1024; if (check_max_decode(fill_flash->pgm->buses_supported & fill_flash->bustype, size) && (!force)) { - fprintf(stderr, "Chip is too big for this programmer " - "(-V gives details). Use --force to override.\n"); + msg_cerr("Chip is too big for this programmer " + "(-V gives details). Use --force to override.\n"); ret = 1; goto out_shutdown; } if (!(read_it | write_it | verify_it | erase_it)) { - printf("No operations were specified.\n"); + msg_ginfo("No operations were specified.\n"); goto out_shutdown; } - if (!filename && !erase_it) { - printf("Error: No filename specified.\n"); - ret = 1; - goto out_shutdown; - } - /* Always verify write operations unless -n is used. */ if (write_it && !dont_verify_it) verify_it = 1; @@ -531,9 +543,10 @@ * Give the chip time to settle. */ programmer_delay(100000); - return doit(fill_flash, force, filename, read_it, write_it, erase_it, verify_it); + ret |= doit(fill_flash, force, filename, read_it, write_it, erase_it, verify_it); out_shutdown: programmer_shutdown(); +out: return ret; } Index: flashrom-message_reorg/flashrom.c =================================================================== --- flashrom-message_reorg/flashrom.c (Revision 1534) +++ flashrom-message_reorg/flashrom.c (Arbeitskopie) @@ -40,7 +40,7 @@ const char flashrom_version[] = FLASHROM_VERSION; char *chip_to_probe = NULL; -int verbose = 0; +int verbose = MSG_INFO; static enum programmer programmer = PROGRAMMER_INVALID; @@ -1457,27 +1457,27 @@ if (firstline) firstline = 0; else - printf("\n"); + msg_ginfo("\n"); for (i = 0; i < startcol; i++) - printf(" "); + msg_ginfo(" "); remaining = cols - startcol; } else { - printf(" "); + msg_ginfo(" "); remaining--; } if (paren && (p == 0)) { - printf("("); + msg_ginfo("("); remaining--; } - printf("%s", pname); + msg_ginfo("%s", pname); remaining -= pnamelen; if (p < PROGRAMMER_INVALID - 1) { - printf(","); + msg_ginfo(","); remaining--; } else { if (paren) - printf(")"); - printf("\n"); + msg_ginfo(")"); + msg_ginfo("\n"); } } } @@ -1534,7 +1534,7 @@ void print_banner(void) { - msg_ginfo("flashrom is free software, get the source code at " + msg_ginfo("flashrom is free software. Get the source code at " "http://www.flashrom.org\n"); msg_ginfo("\n"); } @@ -1840,6 +1840,5 @@ free(oldcontents); free(newcontents); out_nofree: - programmer_shutdown(); return ret; } -- http://www.hailfinger.org/

2 5

[commit] r1536 - trunk
by repository service 14 May '12

14 May '12

Author: hailfinger Date: Tue May 15 00:54:58 2012 New Revision: 1536 URL: http://flashrom.org/trac/flashrom/changeset/1536 Log: Convert printf to msg_* where appropriate. Clean up cli_output.c to be more readable. Use enum instead of #define for message levels. Kill a few exit(0) calls. Print the command line arguments in verbose mode. Move actions (--list-supported etc.) after argument sanity checks. Reduce the number of code paths which have their own programmer_shutdown(). Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/cli_classic.c trunk/cli_output.c trunk/flash.h trunk/flashrom.c Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Mon May 14 03:51:46 2012 (r1535) +++ trunk/cli_classic.c Tue May 15 00:54:58 2012 (r1536) @@ -159,6 +159,18 @@ exit(1); } +static int check_filename(char *filename, char *type) +{ + if (!filename || (filename[0] == '\0')) { + fprintf(stderr, "Error: No %s file specified.\n", type); + return 1; + } + /* Not an error, but maybe the user intended to specify a CLI option instead of a file name. */ + if (filename[0] == '-') + fprintf(stderr, "Warning: Supplied %s file name starts with -\n", type); + return 0; +} + int main(int argc, char *argv[]) { unsigned long size; @@ -377,36 +389,51 @@ cli_classic_abort_usage(); } - /* FIXME: Print the actions flashrom will take. */ - - if (list_supported) { - print_supported(); - exit(0); + if ((read_it | write_it | verify_it) && check_filename(filename, "image")) { + cli_classic_abort_usage(); + } + if (layoutfile && check_filename(layoutfile, "layout")) { + cli_classic_abort_usage(); } #if CONFIG_PRINT_WIKI == 1 if (list_supported_wiki) { print_supported_wiki(); - exit(0); + ret = 0; + goto out; } #endif - if (layoutfile && read_romlayout(layoutfile)) - cli_classic_abort_usage(); - if (process_include_args()) - cli_classic_abort_usage(); + if (list_supported) { + print_supported(); + ret = 0; + goto out; + } + + msg_gdbg("Command line (%i args):", argc - 1); + for (i = 0; i < argc; i++) { + msg_gdbg(" %s", argv[i]); + } + msg_gdbg("\n"); + if (layoutfile && read_romlayout(layoutfile)) { + ret = 1; + goto out; + } + if (process_include_args()) { + ret = 1; + goto out; + } /* Does a chip with the requested name exist in the flashchips array? */ if (chip_to_probe) { for (flash = flashchips; flash && flash->name; flash++) if (!strcmp(flash->name, chip_to_probe)) break; if (!flash || !flash->name) { - fprintf(stderr, "Error: Unknown chip '%s' specified.\n", - chip_to_probe); - printf("Run flashrom -L to view the hardware supported " - "in this flashrom version.\n"); - exit(1); + msg_cerr("Error: Unknown chip '%s' specified.\n", chip_to_probe); + msg_gerr("Run flashrom -L to view the hardware supported in this flashrom version.\n"); + ret = 1; + goto out; } /* Clean up after the check. */ flash = NULL; @@ -419,7 +446,7 @@ myusec_calibrate_delay(); if (programmer_init(prog, pparam)) { - fprintf(stderr, "Error: Programmer initialization failed.\n"); + msg_perr("Error: Programmer initialization failed.\n"); ret = 1; goto out_shutdown; } @@ -442,25 +469,22 @@ } if (chipcount > 1) { - printf("Multiple flash chips were detected: \"%s\"", - flashes[0].name); + msg_cinfo("Multiple flash chips were detected: \"%s\"", flashes[0].name); for (i = 1; i < chipcount; i++) - printf(", \"%s\"", flashes[i].name); - printf("\nPlease specify which chip to use with the " - "-c <chipname> option.\n"); + msg_cinfo(", \"%s\"", flashes[i].name); + msg_cinfo("\nPlease specify which chip to use with the -c <chipname> option.\n"); ret = 1; goto out_shutdown; } else if (!chipcount) { - printf("No EEPROM/flash device found.\n"); + msg_cinfo("No EEPROM/flash device found.\n"); if (!force || !chip_to_probe) { - printf("Note: flashrom can never write if the flash " - "chip isn't found automatically.\n"); + msg_cinfo("Note: flashrom can never write if the flash chip isn't found " + "automatically.\n"); } if (force && read_it && chip_to_probe) { struct registered_programmer *pgm; int compatible_programmers = 0; - printf("Force read (-f -r -c) requested, pretending " - "the chip is there:\n"); + msg_cinfo("Force read (-f -r -c) requested, pretending the chip is there:\n"); /* This loop just counts compatible controllers. */ for (j = 0; j < registered_programmer_count; j++) { pgm = &registered_programmers[j]; @@ -468,9 +492,8 @@ compatible_programmers++; } if (compatible_programmers > 1) - printf("More than one compatible controller " - "found for the requested flash chip, " - "using the first one.\n"); + msg_cinfo("More than one compatible controller found for the requested flash " + "chip, using the first one.\n"); for (j = 0; j < registered_programmer_count; j++) { pgm = &registered_programmers[j]; startchip = probe_flash(pgm, 0, &flashes[0], 1); @@ -478,14 +501,13 @@ break; } if (startchip == -1) { - printf("Probing for flash chip '%s' failed.\n", - chip_to_probe); + msg_cinfo("Probing for flash chip '%s' failed.\n", chip_to_probe); ret = 1; goto out_shutdown; } - printf("Please note that forced reads most likely " - "contain garbage.\n"); - return read_flash_to_file(&flashes[0], filename); + msg_cinfo("Please note that forced reads most likely contain garbage.\n"); + ret = read_flash_to_file(&flashes[0], filename); + goto out_shutdown; } ret = 1; goto out_shutdown; @@ -503,22 +525,14 @@ check_chip_supported(fill_flash); size = fill_flash->total_size * 1024; - if (check_max_decode(fill_flash->pgm->buses_supported & fill_flash->bustype, size) && - (!force)) { - fprintf(stderr, "Chip is too big for this programmer " - "(-V gives details). Use --force to override.\n"); + if (check_max_decode(fill_flash->pgm->buses_supported & fill_flash->bustype, size) && (!force)) { + msg_cerr("Chip is too big for this programmer (-V gives details). Use --force to override.\n"); ret = 1; goto out_shutdown; } if (!(read_it | write_it | verify_it | erase_it)) { - printf("No operations were specified.\n"); - goto out_shutdown; - } - - if (!filename && !erase_it) { - printf("Error: No filename specified.\n"); - ret = 1; + msg_ginfo("No operations were specified.\n"); goto out_shutdown; } @@ -531,9 +545,12 @@ * Give the chip time to settle. */ programmer_delay(100000); - return doit(fill_flash, force, filename, read_it, write_it, erase_it, verify_it); + ret |= doit(fill_flash, force, filename, read_it, write_it, erase_it, verify_it); + /* Note: doit() already calls programmer_shutdown(). */ + goto out; out_shutdown: programmer_shutdown(); +out: return ret; } Modified: trunk/cli_output.c ============================================================================== --- trunk/cli_output.c Mon May 14 03:51:46 2012 (r1535) +++ trunk/cli_output.c Tue May 15 00:54:58 2012 (r1536) @@ -22,34 +22,25 @@ #include <stdarg.h> #include "flash.h" -int print(int type, const char *fmt, ...) +/* Please note that level is the verbosity, not the importance of the message. */ +int print(enum msglevel level, const char *fmt, ...) { va_list ap; - int ret; - FILE *output_type; + int ret = 0; + FILE *output_type = stdout; - switch (type) { - case MSG_ERROR: + if (level == MSG_ERROR) output_type = stderr; - break; - case MSG_BARF: - if (verbose < 3) - return 0; - case MSG_DEBUG2: - if (verbose < 2) - return 0; - case MSG_DEBUG: - if (verbose < 1) - return 0; - case MSG_INFO: - default: - output_type = stdout; - break; - } - va_start(ap, fmt); - ret = vfprintf(output_type, fmt, ap); - va_end(ap); - fflush(output_type); + if (level <= verbose) { + va_start(ap, fmt); + ret = vfprintf(output_type, fmt, ap); + va_end(ap); + /* msg_*spew usually happens inside chip accessors in possibly + * time-critical operations. Don't slow them down by flushing. + */ + if (level != MSG_SPEW) + fflush(output_type); + } return ret; } Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Mon May 14 03:51:46 2012 (r1535) +++ trunk/flash.h Tue May 15 00:54:58 2012 (r1536) @@ -268,13 +268,15 @@ #define ERROR_FLASHROM_LIMIT -201 /* cli_output.c */ +enum msglevel { + MSG_ERROR = 0, + MSG_INFO = 1, + MSG_DEBUG = 2, + MSG_DEBUG2 = 3, + MSG_SPEW = 4, +}; /* Let gcc and clang check for correct printf-style format strings. */ -int print(int type, const char *fmt, ...) __attribute__((format(printf, 2, 3))); -#define MSG_ERROR 0 -#define MSG_INFO 1 -#define MSG_DEBUG 2 -#define MSG_DEBUG2 3 -#define MSG_BARF 4 +int print(enum msglevel level, const char *fmt, ...) __attribute__((format(printf, 2, 3))); #define msg_gerr(...) print(MSG_ERROR, __VA_ARGS__) /* general errors */ #define msg_perr(...) print(MSG_ERROR, __VA_ARGS__) /* programmer errors */ #define msg_cerr(...) print(MSG_ERROR, __VA_ARGS__) /* chip errors */ @@ -287,9 +289,9 @@ #define msg_gdbg2(...) print(MSG_DEBUG2, __VA_ARGS__) /* general debug2 */ #define msg_pdbg2(...) print(MSG_DEBUG2, __VA_ARGS__) /* programmer debug2 */ #define msg_cdbg2(...) print(MSG_DEBUG2, __VA_ARGS__) /* chip debug2 */ -#define msg_gspew(...) print(MSG_BARF, __VA_ARGS__) /* general debug barf */ -#define msg_pspew(...) print(MSG_BARF, __VA_ARGS__) /* programmer debug barf */ -#define msg_cspew(...) print(MSG_BARF, __VA_ARGS__) /* chip debug barf */ +#define msg_gspew(...) print(MSG_SPEW, __VA_ARGS__) /* general debug spew */ +#define msg_pspew(...) print(MSG_SPEW, __VA_ARGS__) /* programmer debug spew */ +#define msg_cspew(...) print(MSG_SPEW, __VA_ARGS__) /* chip debug spew */ /* layout.c */ int register_include_arg(char *name); Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Mon May 14 03:51:46 2012 (r1535) +++ trunk/flashrom.c Tue May 15 00:54:58 2012 (r1536) @@ -40,7 +40,7 @@ const char flashrom_version[] = FLASHROM_VERSION; char *chip_to_probe = NULL; -int verbose = 0; +int verbose = MSG_INFO; static enum programmer programmer = PROGRAMMER_INVALID; @@ -1457,27 +1457,27 @@ if (firstline) firstline = 0; else - printf("\n"); + msg_ginfo("\n"); for (i = 0; i < startcol; i++) - printf(" "); + msg_ginfo(" "); remaining = cols - startcol; } else { - printf(" "); + msg_ginfo(" "); remaining--; } if (paren && (p == 0)) { - printf("("); + msg_ginfo("("); remaining--; } - printf("%s", pname); + msg_ginfo("%s", pname); remaining -= pnamelen; if (p < PROGRAMMER_INVALID - 1) { - printf(","); + msg_ginfo(","); remaining--; } else { if (paren) - printf(")"); - printf("\n"); + msg_ginfo(")"); + msg_ginfo("\n"); } } }

1 0

[PATCH] Add support for Eon EN25F64.
by Stefan Tauner 13 May '12

13 May '12

Its ID was spotted in an descriptor region update by Jetway: http://paste.flashrom.org/view.php?id=1217 No datasheet was found, so most values are just guessed from the EN25F32. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- what's our policy for such cases? i would guess that it will most probably just work... but i did not dare to just commit it (like my EN25QH32 patch a few mins ago). --- flashchips.c | 34 ++++++++++++++++++++++++++++++++++ flashchips.h | 1 + 2 files changed, 35 insertions(+) diff --git a/flashchips.c b/flashchips.c index 4736713..64f14d0 100644 --- a/flashchips.c +++ b/flashchips.c @@ -3319,6 +3319,40 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", + .name = "EN25F64", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25F32, + .total_size = 8192, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", .name = "EN25Q40", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, diff --git a/flashchips.h b/flashchips.h index 0ecb5f3..70d40df 100644 --- a/flashchips.h +++ b/flashchips.h @@ -245,6 +245,7 @@ #define EON_EN25F80 0x3114 #define EON_EN25F16 0x3115 #define EON_EN25F32 0x3116 +#define EON_EN25F64 0x3117 /* guessed */ #define EON_EN25Q40 0x3013 #define EON_EN25Q80 0x3014 #define EON_EN25Q16 0x3015 /* Same as EN25D16 */ -- Kind regards, Stefan Tauner

1 0

[commit] r1535 - trunk
by repository service 13 May '12

13 May '12

Author: stefanct Date: Mon May 14 03:51:46 2012 New Revision: 1535 URL: http://flashrom.org/trac/flashrom/changeset/1535 Log: Add support for Eon EN25QH32. Its ID was spotted in an descriptor region update by Jetway: http://paste.flashrom.org/view.php?id=1217 Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Tue May 8 00:12:16 2012 (r1534) +++ trunk/flashchips.c Mon May 14 03:51:46 2012 (r1535) @@ -3565,7 +3565,43 @@ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {2700, 3600}, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25QH32", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25QH32, + .total_size = 4096, + .page_size = 256, + /* supports SFDP */ + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 4096, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 4096, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, }, { Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Tue May 8 00:12:16 2012 (r1534) +++ trunk/flashchips.h Mon May 14 03:51:46 2012 (r1535) @@ -252,6 +252,7 @@ #define EON_EN25Q64 0x3017 #define EON_EN25Q128 0x3018 #define EON_EN25QH16 0x7015 +#define EON_EN25QH32 0x7016 #define EON_EN29F512 0x7F21 #define EON_EN29F010 0x20 #define EON_EN29F040A 0x7F04

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom