flashrom

flashrom@flashrom.org

3 participants
9189 discussions

[TESTED] Eon flash chip "EN25Q64" (8192 kB, SPI) on rayer_spi.
by Anderson Vulczak 22 Feb '13

22 Feb '13

Hello, Just tested this EPROM and it's writing, reading, erasing great. Thanks, and Best Regards, root@server:~# flashrom -p rayer_spi -w binary.bin flashrom v0.9.5.2-r1517 on Linux 3.2.0-37-generic (x86_64), built with libpci 3.1.8, GCC 4.6.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found Eon flash chip "EN25Q64" (8192 kB, SPI) on rayer_spi. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED.

1 0

[PATCH] Add utility to print all chip names in flashchips.h that are not in flashchips.c.
by Stefan Tauner 22 Feb '13

22 Feb '13

This allows to list yet unsupported chips easily. First it tries to find the directory containing the files, then it uses sed to extract the macro names of chips from flashchips.h, greps for them in flashchips.c and prints it if it is not found. If verbose mode is activated by giving at least one additional parameter it prints the comment following the macro definition too. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- util/list_yet_unsupported_chips.sh | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100755 util/list_yet_unsupported_chips.sh diff --git a/util/list_yet_unsupported_chips.sh b/util/list_yet_unsupported_chips.sh new file mode 100755 index 0000000..2ed71e6 --- /dev/null +++ b/util/list_yet_unsupported_chips.sh @@ -0,0 +1,22 @@ +#!/bin/sh + +path="$(dirname $(readlink -f $0))/.." +if [ ! -e "$path/flashchips.c" -o ! -e "$path/flashchips.h" ]; then + echo "Warning: could not calculate flashchips.[ch]'s directory. Trying current..." + path="." + if [ ! -e "$path/flashchips.c" -o ! -e "$path/flashchips.h" ]; then + echo "Nope, sorry!" + exit 1 + fi +fi + +chips=`sed -re '/#define [A-Z]/ !d' -e '/_ID\s/d' -e 's/\s*#define\s+([[:alnum:]_]+)\s+.*/\1/' $path/flashchips.h` +for c in $chips ; do + if ! grep "$c" "$path/flashchips.c" >/dev/null ; then + if [ -n "$1" ]; then + grep -o "$c.*" "$path/flashchips.h" + else + echo "$c" + fi + fi +done -- Kind regards, Stefan Tauner

1 0

[PATCH] Add W25Q....W series.
by Stefan Tauner 22 Feb '13

22 Feb '13

- Use ".V" (and "_V" in macros) for 3.3V Winbond 25Q chips. Rename the existing chips and add a .voltage entry where it was missing. - Use ".W" (and "_W" in macros) for 1.8V Winbond 25Q chips. - Add a feature flag for QPI-enabled chips: FEATURE_QPI. - Add W25Q20.W, W25Q40.W, W25Q80.W, W25Q16.W, W25Q32.W, W25Q64.W. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flash.h | 1 + flashchips.c | 274 ++++++++++++++++++++++++++++++++++++++++++++++++++++++---- flashchips.h | 20 +++-- print.c | 26 +++--- 4 files changed, 287 insertions(+), 34 deletions(-) diff --git a/flash.h b/flash.h index a479286..b035330 100644 --- a/flash.h +++ b/flash.h @@ -99,6 +99,7 @@ enum write_granularity { #define FEATURE_WRSR_EWSR (1 << 6) #define FEATURE_WRSR_WREN (1 << 7) #define FEATURE_OTP (1 << 8) +#define FEATURE_QPI (1 << 9) #define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN) struct flashctx; diff --git a/flashchips.c b/flashchips.c index d4ab1be..0e0a1ff 100644 --- a/flashchips.c +++ b/flashchips.c @@ -9405,13 +9405,14 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q80", + .name = "W25Q80.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q80, + .model_id = WINBOND_NEX_W25Q80_V, .total_size = 1024, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -9444,13 +9445,14 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q16", + .name = "W25Q16.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q16, + .model_id = WINBOND_NEX_W25Q16_V, .total_size = 2048, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -9483,13 +9485,14 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q32", + .name = "W25Q32.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q32, + .model_id = WINBOND_NEX_W25Q32_V, .total_size = 4096, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -9522,13 +9525,14 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q64", + .name = "W25Q64.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q64, + .model_id = WINBOND_NEX_W25Q64_V, .total_size = 8192, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -9556,17 +9560,19 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, }, { .vendor = "Winbond", - .name = "W25Q128", + .name = "W25Q128.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q128, + .model_id = WINBOND_NEX_W25Q128_V, .total_size = 16384, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, @@ -9594,6 +9600,244 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25Q20.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q20_W, + .total_size = 256, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q40.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q40_W, + .total_size = 512, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q80.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q80_W, + .total_size = 1024, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q16.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q16_W, + .total_size = 2048, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q32.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q32_W, + .total_size = 4096, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q64.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q64_W, + .total_size = 8192, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { diff --git a/flashchips.h b/flashchips.h index 1a0696f..d705c32 100644 --- a/flashchips.h +++ b/flashchips.h @@ -649,12 +649,20 @@ #define WINBOND_NEX_W25X16 0x3015 #define WINBOND_NEX_W25X32 0x3016 #define WINBOND_NEX_W25X64 0x3017 -#define WINBOND_NEX_W25Q40 0x4013 -#define WINBOND_NEX_W25Q80 0x4014 -#define WINBOND_NEX_W25Q16 0x4015 -#define WINBOND_NEX_W25Q32 0x4016 -#define WINBOND_NEX_W25Q64 0x4017 -#define WINBOND_NEX_W25Q128 0x4018 +#define WINBOND_NEX_W25Q40_V 0x4013 /* W25Q40BV; W25Q40BL (2.3-3.6V) */ +#define WINBOND_NEX_W25Q80_V 0x4014 /* W25Q80BV */ +#define WINBOND_NEX_W25Q16_V 0x4015 /* W25Q16CV; W25Q16DV */ +#define WINBOND_NEX_W25Q32_V 0x4016 /* W25Q32BV; W25Q32FV in SPI mode (default) */ +#define WINBOND_NEX_W25Q64_V 0x4017 /* W25Q64BV, W25Q64CV; W25Q64FV in SPI mode (default) */ +#define WINBOND_NEX_W25Q128_V 0x4018 /* W25Q128BV; W25Q128FV in SPI mode (default) */ +#define WINBOND_NEX_W25Q256_V 0x4019 /* W25Q256FV */ +#define WINBOND_NEX_W25Q20_W 0x5012 /* W25Q20BW */ +#define WINBOND_NEX_W25Q40_W 0x5013 /* W25Q40BW */ +#define WINBOND_NEX_W25Q80_W 0x5014 /* W25Q80BW */ +#define WINBOND_NEX_W25Q16_W 0x6015 /* W25Q16DW */ +#define WINBOND_NEX_W25Q32_W 0x6016 /* W25Q32DW; W25Q32FV in QPI mode */ +#define WINBOND_NEX_W25Q64_W 0x6017 /* W25Q64DW; W25Q64FV in QPI mode */ +#define WINBOND_NEX_W25Q128_W 0x6018 /* (No W version known) W25Q128FV in QPI mode */ #define WINBOND_ID 0xDA /* Winbond */ #define WINBOND_W19B160BB 0x49 diff --git a/print.c b/print.c index ecde90f..7d2e5a0 100644 --- a/print.c +++ b/print.c @@ -544,7 +544,7 @@ const struct board_info boards_known[] = { B("ASRock", "G31M-S rev 2.0", OK, "http://www.asrock.com/mb/overview.asp?model=G31M-S", NULL), B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL), B("ASRock", "H61M-ITX", BAD, "http://www.asrock.com/mb/overview.asp?Model=H61M-ITX", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASRock", "H67M", BAD, "http://www.asrock.com/mb/overview.asp?Model=H67M", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASRock", "H67M", BAD, "http://www.asrock.com/mb/overview.asp?Model=H67M", "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASRock", "K7S41", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL), B("ASRock", "K7S41GX", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL), B("ASRock", "K7VT4A+", BAD, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"), @@ -683,16 +683,16 @@ const struct board_info boards_known[] = { B("ASUS", "P6T Deluxe V2", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL), B("ASUS", "P7H57D-V EVO", OK, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL), B("ASUS", "P7H55-M LX", BAD, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), - B("ASUS", "P8B-E/4L", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8B WS", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8H61 PRO", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8H61-M LE/USB3", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8B-E/4L", BAD, NULL, "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8B WS", BAD, NULL, "Probing works (Winbond W25Q32.V, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H61 PRO", BAD, NULL, "Probing works (Winbond W25Q32.V, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H61-M LE/USB3", BAD, NULL, "Probing works (Winbond W25Q32.V, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8H67-M PRO", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8P67 (rev. 3.1)", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8P67 LE", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8P67 LE", BAD, NULL, "Probing works (Winbond W25Q32.V, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8P67 PRO (rev. 3.0)", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8P67_PRO/", NULL), B("ASUS", "P8Z68-V", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V/", "Warning: MAC address of LOM is stored at 0x1000 - 0x1005 of the image."), - B("ASUS", "P8Z68-V PRO", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8Z68-V PRO", BAD, NULL, "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8Z68-V PRO/GEN3", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V_PROGEN3/", "Warning: MAC address of LOM is stored at 0x1000 - 0x1005 of the image."), B("ASUS", "SABERTOOTH 990FX", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/SABERTOOTH_990FX/", NULL), B("ASUS", "SABERTOOTH 990FX R2.0", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/SABERTOOTH_990FX_R20/", NULL), @@ -895,8 +895,8 @@ const struct board_info boards_known[] = { B("MSI", "MS-7596 (785GM-E51)", OK, "http://www.msi.com/product/mb/785GM-E51.html", NULL), B("MSI", "MS-7597 (GF615M-P33)", BAD, NULL, "Missing board enable/SIO support (Fintek F71889), see http://www.flashrom.org/pipermail/flashrom/2012-March/008956.html"), B("MSI", "MS-7599 (870-C45)", OK, "http://www.msi.com/product/mb/870-C45.html", NULL), - B("MSI", "MS-7613 (Iona-GL8E)", BAD, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("MSI", "MS-7635 (H55M-ED55)", BAD, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("MSI", "MS-7613 (Iona-GL8E)", BAD, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("MSI", "MS-7635 (H55M-ED55)", BAD, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("MSI", "MS-7640 (890FXA-GD70)",OK, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL), B("MSI", "MS-7642 (890GXM-G65)", OK, "http://www.msi.com/product/mb/890GXM-G65.html", NULL), B("MSI", "MS-7676 (H67MA-ED55(B3))", OK, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"), @@ -956,8 +956,8 @@ const struct board_info boards_known[] = { B("Supermicro", "X9DRT-HF+", BAD, NULL, "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked; SMM protection enabled."), B("Supermicro", "X9DRW", BAD, NULL, "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("Supermicro", "X9QRi-F+", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C600/X9QRi-F_.cfm", "Probing works (Macronix MX25L12805, 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked; SMM protection enabled."), - B("Supermicro", "X9SCA-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("Supermicro", "X9SCL", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Supermicro", "X9SCA-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Supermicro", "X9SCL", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64.V, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("T-Online", "S-100", OK, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL), B("Tekram", "P6Pro-A5", OK, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL), B("Termtek", "TK-3370 (Rev:2.5B)", OK, NULL, NULL), @@ -1010,8 +1010,8 @@ const struct board_info boards_known[] = { B("VIA", "VB700X", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", OK, NULL, NULL), B("ZOTAC", "GeForce 8200", OK, NULL, NULL), - B("ZOTAC", "H61-ITX WiFi (H61ITX-A-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ZOTAC", "H61-ITX WiFi (H61ITX-A-E)", BAD, NULL, "Probing works (Winbond W25Q32.V, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", BAD, NULL, "Probing works (Winbond W25Q32.V, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ZOTAC", "nForce 630i Supreme (N73U-Supreme)", OK, NULL, NULL), B("ZOTAC", "ZBOX AD02 (PLUS)", OK, NULL, NULL), B("ZOTAC", "ZBOX HD-ID11", OK, NULL, NULL), -- Kind regards, Stefan Tauner

1 0

[commit] r1650 - trunk
by repository service 22 Feb '13

22 Feb '13

Author: stefanct Date: Fri Feb 22 16:58:45 2013 New Revision: 1650 URL: http://flashrom.org/trac/flashrom/changeset/1650 Log: Add a bunch of new/tested stuff and various small changes 17. Tested Mainboards: OK: - Acer V75-M (used in IBM Aptiva 2170-G) http://www.flashrom.org/pipermail/flashrom/2012-December/010300.html - Acorp 6M810C http://www.flashrom.org/pipermail/flashrom/2013-January/010433.html - ASRock G31M-S rev 2.0 http://www.flashrom.org/pipermail/flashrom/2013-February/010538.html - ASUS F1A75-V PRO http://paste.flashrom.org/view.php?id=1528 - ASUS M5A97 (rev. 1.0) http://www.flashrom.org/pipermail/flashrom/2013-February/010483.html - ASUS P5KPL-AM IN/GB http://www.flashrom.org/pipermail/flashrom/2013-January/010455.html - GABYTE GA-H77M-D3H http://www.flashrom.org/pipermail/flashrom/2013-February/010538.html NOT OK: - GIGABYTE GA-Z77MX-D3H http://paste.flashrom.org/view.php?id=1529 http://paste.flashrom.org/view.php?id=1530 Tested flash chips: - Winbond W25X10 to PREW (+PREW) Reported on IRC(?) - Eon EN25Q32(A/B) to PREW (+REW) http://www.flashrom.org/pipermail/flashrom/2013-February/010533.html - Eon EN25Q64 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-January/010466.html Miscellaneous: - Fix superflouos line breaks in wiki mainboard and laptop output. - Use the .nh (no hyphenation) command in the manpage to enforce single-line URLs where useful. - Reference the manpage (besides the Laptops wiki page) in the laptop warning. - Minor output and whitespace fixes. - Add Fidelix IDs. - Add ISSE clones of PMC chips. - Fix typo: EMST -> ESMT. - Add ID of ESMT F25D08QA. - Refine GigaDevice GD25Q series (missing voltages and comments). - Use underscore instead of lower-case x as wildcard in Sharp chip names. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h trunk/flashrom.8 trunk/internal.c trunk/it87spi.c trunk/print.c trunk/print_wiki.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed Feb 20 19:03:36 2013 (r1649) +++ trunk/flashchips.c Fri Feb 22 16:58:45 2013 (r1650) @@ -2713,11 +2713,11 @@ }, { - .vendor = "EMST", + .vendor = "ESMT", .name = "F49B002UA", .bustype = BUS_PARALLEL, - .manufacture_id = EMST_ID, - .model_id = EMST_F49B002UA, + .manufacture_id = ESMT_ID, + .model_id = ESMT_F49B002UA, .total_size = 256, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -2745,11 +2745,11 @@ }, { - .vendor = "EMST", + .vendor = "ESMT", .name = "F25L008A", .bustype = BUS_SPI, - .manufacture_id = EMST_ID, - .model_id = EMST_F25L008A, + .manufacture_id = ESMT_ID, + .model_id = ESMT_F25L008A, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_EITHER, @@ -3748,7 +3748,7 @@ .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PROBE, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -3784,7 +3784,7 @@ .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -4248,13 +4248,13 @@ { .vendor = "GigaDevice", - .name = "GD25Q80", + .name = "GD25Q80(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q80, .total_size = 1024, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -4293,7 +4293,7 @@ .model_id = GIGADEVICE_GD25Q16, .total_size = 2048, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, @@ -4326,13 +4326,13 @@ { .vendor = "GigaDevice", - .name = "GD25Q32", + .name = "GD25Q32(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q32, .total_size = 4096, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, @@ -4365,13 +4365,13 @@ { .vendor = "GigaDevice", - .name = "GD25Q64", + .name = "GD25Q64(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q64, .total_size = 8192, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -4399,17 +4399,18 @@ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", - .name = "GD25Q128", + .name = "GD25Q128B", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q128, .total_size = 16384, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, @@ -4437,6 +4438,7 @@ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, }, { @@ -4447,7 +4449,8 @@ .model_id = GIGADEVICE_GD25LQ32, .total_size = 4096, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6687,7 +6690,7 @@ .name = "LH28F008BJT-BTLZ1", .bustype = BUS_PARALLEL, .manufacture_id = SHARP_ID, - .model_id = SHARP_LH28F008BJxxPB, + .model_id = SHARP_LH28F008BJ__PB, .total_size = 1024, .page_size = 64 * 1024, .tested = TEST_OK_PREW, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Wed Feb 20 19:03:36 2013 (r1649) +++ trunk/flashchips.h Fri Feb 22 16:58:45 2013 (r1650) @@ -201,9 +201,10 @@ #define CATALYST_ID 0x31 /* Catalyst */ #define CATALYST_CAT28F512 0xB8 -#define EMST_ID 0x8C /* EMST / EFST Elite Flash Storage */ -#define EMST_F25L008A 0x2014 -#define EMST_F49B002UA 0x00 +#define ESMT_ID 0x8C /* Elite Semiconductor Memory Technology (ESMT) / EFST Elite Flash Storage */ +#define ESMT_F25L008A 0x2014 +#define ESMT_F25D08QA 0x2534 +#define ESMT_F49B002UA 0x00 /* * EN25 chips are SPI, first byte of device ID is memory type, @@ -265,6 +266,15 @@ #define EON_EN29F002T 0x7F92 /* Same as EN29F002A */ #define EON_EN29F002B 0x7F97 /* Same as EN29F002AN */ +#define FIDELIX_ID 0xF8 /* Fidelix */ +#define FIDELIX_FM25M16 0x4215 +#define FIDELIX_FM25M32 0x4216 +#define FIDELIX_FM25M64 0x4217 +#define FIDELIX_FM25Q08 0x3214 +#define FIDELIX_FM25Q16 0x3215 /* Same as FM25S16 (which is apparently single I/O only) */ +#define FIDELIX_FM25Q32 0x3216 +#define FIDELIX_FM25Q64 0x3217 + #define FUJITSU_ID 0x04 /* Fujitsu */ #define FUJITSU_MBM29DL400BC 0x0F #define FUJITSU_MBM29DL400TC 0x0C @@ -299,11 +309,11 @@ #define GIGADEVICE_ID 0xC8 /* GigaDevice */ #define GIGADEVICE_GD25Q20 0x4012 #define GIGADEVICE_GD25Q40 0x4013 -#define GIGADEVICE_GD25Q80 0x4014 -#define GIGADEVICE_GD25Q16 0x4015 -#define GIGADEVICE_GD25Q32 0x4016 -#define GIGADEVICE_GD25Q64 0x4017 -#define GIGADEVICE_GD25Q128 0x4018 +#define GIGADEVICE_GD25Q80 0x4014 /* Same as GD25Q80B (which has OTP) */ +#define GIGADEVICE_GD25Q16 0x4015 /* Same as GD25Q16B (which has OTP) */ +#define GIGADEVICE_GD25Q32 0x4016 /* Same as GD25Q32B */ +#define GIGADEVICE_GD25Q64 0x4017 /* Same as GD25Q64B */ +#define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B only? */ #define GIGADEVICE_GD25LQ32 0x6016 #define HYUNDAI_ID 0xAD /* Hyundai */ @@ -451,10 +461,10 @@ #define PMC_PM25LV016B 0x14 #define PMC_PM29F002T 0x1D #define PMC_PM29F002B 0x2D -#define PMC_PM39LV512 0x1B -#define PMC_PM39F010 0x1C /* Same as Pm39LV010 */ +#define PMC_PM39LV512 0x1B /* Same as IS39LV512 */ +#define PMC_PM39F010 0x1C /* Same as Pm39LV010, IS39LV010 */ #define PMC_PM39LV020 0x3D -#define PMC_PM39LV040 0x3E +#define PMC_PM39LV040 0x3E /* Same as IS39LV040 */ #define PMC_PM39F020 0x4D #define PMC_PM39F040 0x4E #define PMC_PM49FL002 0x6D @@ -469,11 +479,11 @@ #define SANYO_LE25FW203A 0x1600 #define SHARP_ID 0xB0 /* Sharp */ -#define SHARP_LH28F008BJxxPT 0xEC -#define SHARP_LH28F008BJxxPB 0xED -#define SHARP_LH28F800BVxxBTL 0x4B -#define SHARP_LH28F800BVxxBV 0x4D -#define SHARP_LH28F800BVxxTV 0x4C +#define SHARP_LH28F008BJ__PT 0xEC +#define SHARP_LH28F008BJ__PB 0xED +#define SHARP_LH28F800BV__BTL 0x4B +#define SHARP_LH28F800BV__BV 0x4D +#define SHARP_LH28F800BV__TV 0x4C #define SHARP_LHF00L02 0xC9 /* Same as LHF00L06/LHF00L07 */ #define SHARP_LHF00L04 0xCF /* Same as LHF00L03/LHF00L05 */ Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Wed Feb 20 19:03:36 2013 (r1649) +++ trunk/flashrom.8 Fri Feb 22 16:58:45 2013 (r1650) @@ -161,6 +161,7 @@ .BR \-\-list\-supported , but outputs the supported hardware in MediaWiki syntax, so that it can be easily pasted into the wiki page at +.nh .BR http://www.flashrom.org/ . Please note that MediaWiki output is not compiled in by default. .TP @@ -390,6 +391,7 @@ .B BUGS section). The embedded controller (EC) in these machines often interacts badly with flashing. +.nh .B http://www.flashrom.org/Laptops has more information. For example the EC firmware sometimes resides on the same flash chip as the host firmware. While flashrom tries to change the contents of @@ -715,8 +717,10 @@ (DLC 5). .sp More information about the RayeR hardware is available at +.nh .BR "http://rayer.ic.cz/elektro/spipgm.htm " . The schematic of the Xilinx DLC 5 was published at +.nh .BR "http://www.xilinx.com/itp/xilinx4/data/docs/pac/appendixb.html " . .SS .BR "pony_spi " programmer @@ -730,6 +734,7 @@ parameter accepts the values "si_prog" (default) or "serbang". .sp Information about the SI-Prog adapter can be found at +.nh .BR "http://www.lancos.com/siprogsch.html " . .sp An example call to flashrom is @@ -765,6 +770,7 @@ section above. .sp More information about the hardware is available at +.nh .BR http://wiki.opengraphics.org . .SS .BR "linux_spi " programmer @@ -869,6 +875,7 @@ too. Please provide a way to contact you later (e.g.\& a mail address) and be patient if there is no immediate reaction. Also, we provide a pastebin service at +.nh .B http://paste.flashrom.org that is very useful when you want to share logs etc.\& without spamming the channel. @@ -884,8 +891,8 @@ .B internal programmer subsection of the .B PROGRAMMER SPECIFIC INFO -section. -.B " http://www.flashrom.org/Laptops" +section and the information in our wiki at +.BR "http://www.flashrom.org/Laptops " . .SS One-time programmable (OTP) memory and unique IDs .sp Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Wed Feb 20 19:03:36 2013 (r1649) +++ trunk/internal.c Fri Feb 22 16:58:45 2013 (r1650) @@ -299,7 +299,7 @@ msg_perr("Laptops, notebooks and netbooks are difficult to support and we\n" "recommend to use the vendor flashing utility. The embedded controller\n" "(EC) in these machines often interacts badly with flashing.\n" - "See http://www.flashrom.org/Laptops for details.\n\n" + "See the manpage and http://www.flashrom.org/Laptops for details.\n\n" "If flash is shared with the EC, erase is guaranteed to brick your laptop\n" "and write may brick your laptop.\n" "Read and probe may irritate your EC and cause fan failure, backlight\n" Modified: trunk/it87spi.c ============================================================================== --- trunk/it87spi.c Wed Feb 20 19:03:36 2013 (r1649) +++ trunk/it87spi.c Fri Feb 22 16:58:45 2013 (r1650) @@ -87,15 +87,12 @@ case 0x86: case 0x87: /* FIXME: Print revision for all models? */ - msg_pdbg("Found ITE Super I/O, ID 0x%04hx on port " - "0x%x\n", s.model, s.port); + msg_pdbg("Found ITE Super I/O, ID 0x%04hx on port 0x%x\n", s.model, s.port); register_superio(s); break; case 0x85: - msg_pdbg("Found ITE EC, ID 0x%04hx," - "Rev 0x%02x on port 0x%x.\n", - s.model, sio_read(s.port, CHIP_VER_REG), - s.port); + msg_pdbg("Found ITE EC, ID 0x%04hx, Rev 0x%02x on port 0x%x.\n", + s.model, sio_read(s.port, CHIP_VER_REG), s.port); register_superio(s); break; } Modified: trunk/print.c ============================================================================== --- trunk/print.c Wed Feb 20 19:03:36 2013 (r1649) +++ trunk/print.c Fri Feb 22 16:58:45 2013 (r1650) @@ -519,6 +519,7 @@ B("abit", "VT6X4", OK, NULL, NULL), B("Acer", "V75-M", OK, NULL, "This is an OEM board used by IBM in e.g. Aptiva 2170-G"), B("Acorp", "6A815EPD", OK, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…", NULL), + B("Acorp", "6M810C", OK, NULL, NULL), B("Advantech", "PCM-5820", OK, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL), B("agami", "Aruma", OK, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…", NULL), B("Albatron", "PM266A Pro", OK, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…", NULL), /* FIXME */ @@ -540,6 +541,7 @@ B("ASRock", "ALiveNF6G-DVI", OK, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL), B("ASRock", "AM2NF6G-VSTA", OK, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL), B("ASRock", "E350M1/USB3", OK, "http://www.asrock.com/mb/overview.asp?model=e350m1/usb3", NULL), + B("ASRock", "G31M-S rev 2.0", OK, "http://www.asrock.com/mb/overview.asp?model=G31M-S", NULL), B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL), B("ASRock", "H61M-ITX", BAD, "http://www.asrock.com/mb/overview.asp?Model=H61M-ITX", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASRock", "H67M", BAD, "http://www.asrock.com/mb/overview.asp?Model=H67M", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), @@ -577,6 +579,7 @@ B("ASUS", "Crosshair IV Extreme", OK, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL), B("ASUS", "DSAN-DX", NT, "http://www.asus.com/Server_Workstation/Server_Motherboards/DSANDX/", NULL), B("ASUS", "E35M1-I DELUXE", OK, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/", NULL), + B("ASUS", "F1A75-V PRO", OK, "http://www.asus.com/Motherboard/F1A75V_PRO/", NULL), B("ASUS", "K8N", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL), B("ASUS", "K8V", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL), B("ASUS", "K8V SE Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL), @@ -611,6 +614,7 @@ B("ASUS", "M4N68T V2", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4N68T_V2/", NULL), B("ASUS", "M4N78 PRO", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL), B("ASUS", "M5A78L-M LX", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A78LM_LX/", "The MAC address of the onboard LAN NIC is stored in flash, hence overwritten by flashrom; see http://www.flashrom.org/pipermail/flashrom/2012-May/009200.html"), + B("ASUS", "M5A97 (rev. 1.0)", OK, "http://www.asus.com/Motherboard/M5A97/", NULL), B("ASUS", "M5A99X EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL), B("ASUS", "Maximus IV Extreme", BAD, "http://www.asus.com/Motherboards/Intel_Socket_1155/Maximus_IV_Extreme/", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "MEW-AM", BAD, NULL, "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), @@ -656,6 +660,7 @@ B("ASUS", "P5K-V", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL), B("ASUS", "P5K-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL), B("ASUS", "P5KC", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL), + B("ASUS", "P5KPL-AM IN/GB", OK, "http://support.asus.com/download.aspx?SLanguage=en&m=P5KPL-AM+IN%2fGB&os=29", NULL), B("ASUS", "P5KPL-CM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL), B("ASUS", "P5L-MX", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL), B("ASUS", "P5L-VM 1394", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL), @@ -777,6 +782,7 @@ B("GIGABYTE", "GA-H61M-D2-B3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3773", NULL), B("GIGABYTE", "GA-H61M-D2H-USB3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4004", NULL), B("GIGABYTE", "GA-H77-D3H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4141", "Does only work with -p internal:ich_spi_mode=hwseq due to an evil twin of MX25L6405 and ICH SPI lockdown."), + B("GIGABYTE", "GA-H77M-D3H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4388", NULL), B("GIGABYTE", "GA-EX58-UD4P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), B("GIGABYTE", "GA-K8N-SLI", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), B("GIGABYTE", "GA-K8N51GMF", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL), @@ -804,6 +810,7 @@ B("GIGABYTE", "GA-X79-UD5", OK, NULL, NULL), B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL), B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL), + B("GIGABYTE", "GA-Z77MX-D3H", BAD, "http://www.gigabyte.com/products/product-page.aspx?pid=4145", "Uses MX25L6436E and requires a small patch (but works flawlessly with that)."), B("HP", "8100 Elite CMT PC (304Bh)", BAD, NULL, "SPI lock down, PR, read-only descriptor, locked ME region."), B("HP", "e-Vectra P2706T", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL), B("HP", "ProLiant DL145 G3", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL), Modified: trunk/print_wiki.c ============================================================================== --- trunk/print_wiki.c Wed Feb 20 19:03:36 2013 (r1649) +++ trunk/print_wiki.c Fri Feb 22 16:58:45 2013 (r1650) @@ -209,7 +209,7 @@ /* end inner table if it did not fill the last column fully */ if (((i % lines_per_col)) > 0) printf("\n|}\n\n"); - printf("\n\n|}\n"); + printf("|}\n"); if (num_notes > 0) printf("\n<small>\n%s</small>\n", notes);

1 0

Re: [flashrom] Added chipsets
by Stefan Tauner 22 Feb '13

22 Feb '13

On Fri, 22 Feb 2013 08:58:54 +0400 Николай Николаев <evrinoma(a)gmail.com> wrote: >> these look like typos? > This is not typos. I'm verified again all documentation. > The chip S25FL128S has a Device Identification like a 2018 (table 11.2 page > 133) > The chip S25FL256S has a Device Identification like a 0219 (table 11.2 page > 133) > The chip S25FL256S has a Device Identification like a 0220 (table 11.4 page > 123) >> +#define SPANSION_S25FL128 0x2018 >> +#define SPANSION_S25FL256 0x0219 >> +#define SPANSION_S25FL512 0x0220 hm... still looks like a typo, but maybe not your typo (well, you added a typo now in the last line but that's not what I am talking about ;) It would not be the first time that a datasheet has wrong IDs. It just happens too easily. In general it would be best to verify that with actual hardware and/or to contact the manufacturer. I have no time to look into this now in detail. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Added chipsets
by Stefan Tauner 22 Feb '13

22 Feb '13

On Fri, 22 Feb 2013 08:07:33 +0300 Peter Lemenkov <lemenkov(a)gmail.com> wrote: > Hello! > > 2013/2/22 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>: > > > It would also make sense to split your huge patch into smaller pieces > > (e.g. one patch per manufacturer) so that we can review it easier. > > Maybe it's time to consider switching to Git entirely? Git is much > more better suited for this kind of task. You need to convince Carl-Daniel not me :) I have never checked out flashrom with subversion directly, only with git-svn and that works very nicely and there is no reason why submitting patches would be easier due to a switch to git alone (i.e. when we still demand patches to be sent to the mailing list instead of pull requests on github or something similar). As said, I use it all the time and there has been no problems with the patches generated by me or anybody else using git AFAIK. Also, Carl-Daniel repeatedly said there is no way he will switch to git and since there is no immediate need to do so this will not happen in the near future. If anybody has major problems with the git-svn/git send-email workflow he can also send me pull requests on github https://github.com/stefanct/flashrom But I don't make any promises that I will merge them in a timely manner *or at all* and this should be regarded as the last resort. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[PATCH] dediprog: Use asynchronous bulk transfers for reading
by Nico Huber 22 Feb '13

22 Feb '13

This utilizes libusb-1.0's interface for asynchronous transfers. A read is split into 512 byte chunks as required by the dediprog hardware. Up to eight chunks are scheduled for asynchronous transfer which results in a viable speed-up. First tests have shown a three times speed increase. Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- dediprog.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 83 insertions(+), 9 deletions(-) diff --git a/dediprog.c b/dediprog.c index 93c4072..3cd7b01 100644 --- a/dediprog.c +++ b/dediprog.c @@ -31,6 +31,7 @@ #define FIRMWARE_VERSION(x,y,z) ((x << 16) | (y << 8) | z) #define DEFAULT_TIMEOUT 3000 +#define DEDIPROG_ASYNC_TRANSFERS 8 /* at most 8 asynchronous transfers */ static libusb_context *usb_ctx; static libusb_device_handle *dediprog_handle; static int dediprog_firmwareversion; @@ -235,6 +236,38 @@ static int dediprog_set_spi_speed(unsigned int spispeed_idx) return 0; } +struct dediprog_transfer_status { + int error; /* OK if 0, ERROR else */ + unsigned int queued_idx; + unsigned int finished_idx; +}; + +static void dediprog_bulk_read_cb(struct libusb_transfer *const transfer) +{ + struct dediprog_transfer_status *const status = (struct dediprog_transfer_status *)transfer->user_data; + if (transfer->status != LIBUSB_TRANSFER_COMPLETED) { + status->error = 1; + msg_perr("SPI bulk read failed!\n"); + } + ++status->finished_idx; +} + +static int dediprog_bulk_read_poll(const struct dediprog_transfer_status *const status, const int finish) +{ + if (status->finished_idx >= status->queued_idx) + return 0; + + do { + struct timeval timeout = { 10, 0 }; + const int ret = libusb_handle_events_timeout_completed(usb_ctx, &timeout, NULL); + if (ret < 0) { + msg_perr("Polling read events failed: %i %s!\n", ret, libusb_error_name(ret)); + return 1; + } + } while (finish && (status->finished_idx < status->queued_idx)); + return 0; +} + /* Bulk read interface, will read multiple 512 byte chunks aligned to 512 bytes. * @start start address * @len length @@ -243,7 +276,7 @@ static int dediprog_set_spi_speed(unsigned int spispeed_idx) static int dediprog_spi_bulk_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - int ret, transferred; + int ret, err = 1; unsigned int i; /* chunksize must be 512, other sizes will NOT work at all. */ const unsigned int chunksize = 0x200; @@ -253,6 +286,10 @@ static int dediprog_spi_bulk_read(struct flashctx *flash, uint8_t *buf, chunksize & 0xff, (chunksize >> 8) & 0xff }; + struct dediprog_transfer_status status = { 0, 0, 0 }; + struct libusb_transfer *transfers[DEDIPROG_ASYNC_TRANSFERS] = { NULL, }; + struct libusb_transfer *transfer; + if ((start % chunksize) || (len % chunksize)) { msg_perr("%s: Unaligned start=%i, len=%i! Please report a bug " "at flashrom(a)flashrom.org\n", __func__, start, len); @@ -273,17 +310,54 @@ static int dediprog_spi_bulk_read(struct flashctx *flash, uint8_t *buf, return 1; } - for (i = 0; i < count; i++) { - ret = libusb_bulk_transfer(dediprog_handle, 0x80 | dediprog_endpoint, - buf + i * chunksize, chunksize, &transferred, DEFAULT_TIMEOUT); - if ((ret < 0) || (transferred != chunksize)) { - msg_perr("SPI bulk read %i failed, expected %i, got %i %s!\n", - i, chunksize, ret, libusb_error_name(ret)); - return 1; + /* + * Ring buffer of bulk transfers. + * Poll until at least one transfer is ready, + * schedule next transfers until buffer is full. + */ + + /* Allocate bulk transfers. */ + for (i = 0; i < min(DEDIPROG_ASYNC_TRANSFERS, count); ++i) { + transfers[i] = libusb_alloc_transfer(0); + if (!transfers[i]) { + msg_perr("Allocating libusb transfer %i failed: %s!\n", i, libusb_error_name(ret)); + goto _err_free; } } - return 0; + /* Now transfer requested chunks using libusb's asynchronous interface. */ + while (!status.error && (status.queued_idx < count)) { + while ((status.queued_idx - status.finished_idx) < DEDIPROG_ASYNC_TRANSFERS) { + transfer = transfers[status.queued_idx % DEDIPROG_ASYNC_TRANSFERS]; + libusb_fill_bulk_transfer(transfer, dediprog_handle, 0x80 | dediprog_endpoint, + (unsigned char *)buf + status.queued_idx * chunksize, chunksize, + dediprog_bulk_read_cb, &status, DEFAULT_TIMEOUT); + transfer->flags |= LIBUSB_TRANSFER_SHORT_NOT_OK; + ret = libusb_submit_transfer(transfer); + if (ret < 0) { + msg_perr("Submitting SPI bulk read %i failed: %i %s!\n", + status.queued_idx, ret, libusb_error_name(ret)); + goto _err_free; + } + ++status.queued_idx; + } + if (dediprog_bulk_read_poll(&status, 0)) + goto _err_free; + } + /* Wait for transfers to finish. */ + if (dediprog_bulk_read_poll(&status, 1)) + goto _err_free; + /* Check if everything has been transmitted. */ + if ((status.finished_idx < count) || status.error) + goto _err_free; + + err = 0; + +_err_free: + dediprog_bulk_read_poll(&status, 1); + for (i = 0; i < DEDIPROG_ASYNC_TRANSFERS; ++i) + if (transfers[i]) libusb_free_transfer(transfers[i]); + return err; } static int dediprog_spi_read(struct flashctx *flash, uint8_t *buf, -- 1.7.9.5

1 0

Re: [flashrom] Added chipsets
by Stefan Tauner 22 Feb '13

22 Feb '13

Hello Николай, that's quite some work you have done, thank you. There is one very important bit missing though: the signed-off-by line that certifies that you are legally allowed to release these changes under a free license. Please see http://flashrom.org/Development_Guidelines and http://www.coreboot.org/Development_Guidelines#Sign-off_Procedure for details. We can not commit your changes without this. It would also make sense to split your huge patch into smaller pieces (e.g. one patch per manufacturer) so that we can review it easier. I have not looked at the patch in detail, but some naming will have to change probably. > +#define SPANSION_S25FL128 0x2018 > +#define SPANSION_S25FL256 0x0219 > +#define SPANSION_S25FL512 0x0220 these look like typos? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

3 3

EN25Q32(A/B) fully tested
by Lucian Langa 22 Feb '13

22 Feb '13

Hi, I just tested EN25Q32 chip on a raspberry spi programmer. The memory chip comes from a TP-LINK router (mr3220v2) that contains this chips. I used flashrom+rpi(spi) to reflash router firmware, as I previously bricked the router beyond the recovery. I have desoldered the chip from the router and connected it directly to the raspberry headers. All in all it went fine I managed to reflash the chip and router works fine now. See attached logs from all operation I used (READ/ERASE/WRITE) Cheers, --lucian

2 1

Logs for ASRock G31M-S rev 2.0, Gigabyte GA-H77M-D3H rev. 1.1
by Александр Владимирович 22 Feb '13

22 Feb '13

Logs for ASRock G31M-S rev 2.0, Gigabyte GA-H77M-D3H rev. 1.1

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom