flashrom July 2015

flashrom@flashrom.org

21 participants
41 discussions

Gigabyte H55M-S2 don't reflashed
by Александр Трубицын 05 Jul '15

05 Jul '15

Hi! I can't read the name of the flash chip on the motherboard. Try to read it later with magnifying glass. -- With best regards, Alexander V. Trubitsyn

2 3

W25Q64.V: Asrock H67DE3 don't read from flash
by Александр Трубицын 05 Jul '15

05 Jul '15

Hi! I try to read flash by the boot from usb-stick into non UEFI mode. May be boot it in UEFY mode???

2 1

MX25L6406E: Gigabyte GA-H77-DS3H successfully reflashed
by Александр Трубицын 05 Jul '15

05 Jul '15

Hi! -- with best regards, Alexander V. Trubitsyn

2 1

Serprog future, 32bit addressing, and I'd like to get rid of write+poll sequences for each byte...
by Urja Rannikko 04 Jul '15

04 Jul '15

Hi, So Stefan suggested that serprog should switch to 32-bit addressing and do it with a change of protocol version, thus creating a compatibility boundary and also significantly slowing down the case of 1-byte writes (write_jedec_1, write_28sf040, write_82802ab, ... also write_en29lv640b but that writes 16bit words*) but with the positive side of keeping the flashrom serprog driver simpler in that sense (no supoprt code for old 24bit)... I had different ideas (either a 2-byte command to switch the highest byte of the address or just a bunch of new 32bit addressing commands), but I thought about it for a moment, trying to find what would be needed for the protocol version change to be OK with me: 1. frser-duino (and other SPI-only) being about the only serprog firmware not used only by developers should continue to work; in essense we'd allow protocol version 1 if supported bustypes is only SPI because for SPI-only functionality the versions would be identical (maybe if contains SPI and other mask only to SPI and print warning, but i dunno.) - I'd switch the libfrser SPI-only build to announce version 2 much later (if at all), in essense when most distributed flashrom versions would've gotten the version 2 support. 2. We should get rid of write_jedec_1 resulting in a huge sequence of 1-byte writes (and polls) being sent to the programmer - this is the case that the bigger addressing would noticeably impact (with like 5 ops with address per byte written). Also, I'm now assuming this would be after we get something like the write_jedec_1 changes and poll opcode supoprt I've made here: https://github.com/urjaman/flashrom/commits/serprog-improvements into flashrom. I'll try to look at them again and clean that up into a patch sequence for review/comments in the meantime. So my suggestion/idea is that we'd essentially hint the programmer code about the 1-byte write sequence being done, kinda something like this: static int write_byte_program_jedec_common(const struct flashctx *flash, const uint8_t *src, chipaddr dst, unsigned int mask) { chipaddr bios = flash->virtual_memory; chip_hint(BYTE_PGM_START); /* Issue JEDEC Byte Program command */ start_program_jedec_common(flash, mask); chip_hint(BYTE_PGM_DATA_ADDR_DATA_BYTE); /* transfer data from source to destination */ chip_writeb(flash, *src, dst); toggle_ready_jedec(flash, bios); chip_hint(BYTE_PGM_END); return 0; } where each hint (except start/end just to contain the sequence) would only affect the next operation (write or poll) done, and the possible options would be: immediate/const address and data (default if no hint) variable address (const data) (this'd be used by the 82802b and 28sf040 stuff) variable data (const address) (no use for this afaik but these can be implemented as 2 bits that allow this). variable address and data where "variable" means the address and data of the byte being written and const being just embedded into the sequence that is repeated for each byte. Serprog code would create the sequence for writing the byte on the first byte and transfer it into the device and on subsequent bytes just verify that the sequence hasnt changed (if has, send a new sequence - this would allow the sequence to contain stuff like a page address, as long as it doesnt change on every byte) and compile these programming writeb's into an extended write-n command that'd be sent to the device where each byte would represent going through the sequence stored previously with new address and data for that byte. * write_en29lv640b: I dunno what do do about this for this case... maybe just leave it as is until somebody has one and wants to test stuff...I mean we could design the serprog protocol to allow hinting of 2-byte sequences too... So, comments? -- Urja Rannikko

1 0

Re: [flashrom] [PATCH 4/5] dediprog: Support new communication protocol.
by David Woodhouse 03 Jul '15

03 Jul '15

On Mon, 2015-06-22 at 03:37 +0200, Stefan Tauner wrote: > +/* Returns true if firmware (and thus hardware) supports the "new" protocol */ > +static bool is_new_prot(void) > { > - size_t i; > + /* if (SF100) */ > + return dediprog_firmwareversion >= FIRMWARE_VERSION(5, 5, 0); > + /* else if (SF600) > + return dediprog_firmwareversion >= FIRMWARE_VERSION(6, 9, 0); > */ ... and in dediprog_check_devicestring() we still have: msg_pdbg("Found a %s\n", buf); if (memcmp(buf, "SF100", 0x5) != 0) { msg_perr("Device not a SF100!\n"); return 1; } Is this patch set actually intended to support SF600? I had assumed so, so I've rounded up some potential testers for that, and was just trying to put together something for them to test... -- David Woodhouse Open Source Technology Centre David.Woodhouse(a)intel.com Intel Corporation

1 0

Aspeed 2450
by Paul van der Vlis 02 Jul '15

02 Jul '15

Hello, I would like support for the Aspeed ast2450. This BMC SOC is interesting, because there is a free IPMI solution for it from Facebook. It's in many servers from Supermicro's, MSI, ASUS, Advantech, Gigabyte, Tyan and Lenovo. https://github.com/facebook/openbmc https://code.facebook.com/posts/1601610310055392/introducing-openbmc-an-ope… With regards, Paul van der Vlis. -- Paul van der Vlis Linux systeembeheer, Groningen http://www.vandervlis.nl/

1 1

Fwd: W836xx
by mstaken＠comcast.net 02 Jul '15

02 Jul '15

----- Forwarded Message ----- From: mstaken(a)comcast.net To: flashrom(a)flashrom.org Sent: Mon, 29 Jun 2015 00:12:19 -0000 (UTC) Subject: W836xx flashrom v0.9.5.2-r1546 on Linux 3.2.0-4-amd64 (x86_64) flashrom was built with libpci 3.1.7, GCC 4.6.2, little endian Command line (7 args): flashrom -p internal:laptop=this_is_not_a_laptop -V -r bios.rom -o flashrom.log Calibrating delay loop... OS timer resolution is 1 usecs, 665M loops per second, 10 myus = 10 us, 100 myus = 101 us, 1000 myus = 1000 us, 10000 myus = 10017 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "23-g017c" DMI string system-version: " " DMI string baseboard-manufacturer: "Hewlett-Packard" DMI string baseboard-product-name: "2B06" DMI string baseboard-version: "A01" DMI string chassis-type: "All In One" DMI chassis-type is not specific enough. W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 85. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. Found ITE EC, ID 0x8518,Rev 0x08 on port 0x4e. ======================================================================== WARNING! You may be running flashrom on an unsupported laptop. We could not detect this for sure because your vendor has not setup the SMBIOS tables correctly. You can enforce execution by adding '-p internal:laptop=this_is_not_a_laptop' to the command line, but please read the following warning if you are not sure. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Proceeding anyway because user forced us to. Found chipset "AMD Hudson" with PCI ID 1022:780e. Enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=0, ArbWaitCount=7, SpiBridgeDisable=1, DropOneClkOnRd=0 NormSpeed is Reserved MHz GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK SB700 IMC is not active. ROM strap override is not active OK. Super I/O ID 0x8518 is not on the list of flash capable controllers. The following protocols are supported: LPC, FWH, SPI. Probing for AMIC A25L05PT, 64 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L05PU, 64 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L10PT, 128 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L10PU, 128 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L20PT, 256 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L20PU, 256 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L40PT, 512 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L40PU, 512 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L80P, 1024 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L16PT, 2048 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L16PU, 2048 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L512, 64 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L010, 128 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L020, 256 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L040, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L080, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L016, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25L032, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A25LQ032, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT25DF021, 256 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT25DF041A, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT25DF081, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT25DF081A, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT25DF161, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT25DF321, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT25DF321A, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT25DF641(A), 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT25DQ161, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT25F512B, 64 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT25FS010, 128 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT25FS040, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT26DF041, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT26DF081A, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT26DF161, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT26DF161A, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT26F004, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT45CS1282, 16896 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT45DB011D, 128 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT45DB021D, 256 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT45DB041D, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT45DB081D, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT45DB161D, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT45DB321C, 4224 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT45DB321D, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel AT45DB642D, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for EMST F25L008A, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B05, 64 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B05T, 64 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B10, 128 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B10T, 128 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B20, 256 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B20T, 256 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B40, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B40T, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B80, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B80T, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B16, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B16T, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B32, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B32T, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B64, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25B64T, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25F05, 64 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25F10, 128 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25F20, 256 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25F40, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25F80, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25F16, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25F32, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25Q40, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25Q80(A), 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25Q16, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25Q32(A/B), 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25Q64, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25Q128, 16384 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25QH16, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon EN25QH32, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for GigaDevice GD25Q20, 256 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for GigaDevice GD25Q40, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for GigaDevice GD25Q80, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for GigaDevice GD25Q16, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for GigaDevice GD25Q32, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for GigaDevice GD25Q64, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for GigaDevice GD25Q128, 16384 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix MX25L512, 64 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix MX25L1005, 128 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix MX25L2005, 256 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix MX25L4005, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix MX25L8005, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix MX25L1605, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix MX25L1635D, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix MX25L1635E, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix MX25L3205, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix MX25L3235D, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix MX25L6405, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix MX25L12805, 16384 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Numonyx M25PE10, 128 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Numonyx M25PE20, 256 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Numonyx M25PE40, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Numonyx M25PE80, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Numonyx M25PE16, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Numonyx N25Q064, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for PMC Pm25LV010, 128 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for PMC Pm25LV016B, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for PMC Pm25LV020, 256 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for PMC Pm25LV040, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for PMC Pm25LV080B, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for PMC Pm25LV512, 64 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Sanyo LF25FW203A, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Spansion S25FL004A, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Spansion S25FL008A, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Spansion S25FL016A, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Spansion S25FL032A, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Spansion S25FL064A, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for SST SST25LF040A, 512 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 5 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for SST SST25LF080A, 1024 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 5 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for SST SST25VF010, 128 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 5 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for SST SST25VF016B, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for SST SST25VF032B, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for SST SST25VF064C, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for SST SST25VF040, 512 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 5 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for SST SST25VF040B, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for SST SST25VF040B.REMS, 512 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 5 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for SST SST25VF080B, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25P05-A, 64 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25P05, 64 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. SB600 FIFO pointer corruption! Pointer is 3, wanted 5 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25P10-A, 128 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25P10, 128 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. SB600 FIFO pointer corruption! Pointer is 3, wanted 5 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25P20, 256 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25P40, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25P40-old, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. SB600 FIFO pointer corruption! Pointer is 3, wanted 5 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25P80, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25P16, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25P32, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25P64, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25P128, 16384 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25PX16, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25PX32, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST M25PX64, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Winbond W25Q80, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Winbond W25Q16, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Winbond W25Q32, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Winbond W25Q64, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Winbond W25Q128, 16384 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Winbond W25X10, 128 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Winbond W25X20, 256 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Winbond W25X40, 512 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Winbond W25X80, 1024 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Winbond W25X16, 2048 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Winbond W25X32, 4096 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Winbond W25X64, 8192 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Unknown SFDP-capable chip, 0 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 6 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Atmel unknown Atmel SPI chip, 0 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Eon unknown Eon SPI chip, 0 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Macronix unknown Macronix SPI chip, 0 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for PMC unknown PMC SPI chip, 0 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for SST unknown SST SPI chip, 0 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for ST unknown ST SPI chip, 0 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Sanyo unknown Sanyo SPI chip, 0 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Generic unknown SPI chip (RDID), 0 kB: SB600 FIFO pointer corruption! Pointer is 0, wanted 3 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for Generic unknown SPI chip (REMS), 0 kB: SB600 FIFO pointer corruption! Pointer is 3, wanted 5 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip. Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x00, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x85, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x00, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x85, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x00, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x85, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x85, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x85, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xa4, id2 0x28, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x00, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x00, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x85, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xa4, id2 0x28, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x85, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x85, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x00, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xa4, id2 0x28, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x85, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xa4, id2 0x28, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0x85, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x00, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x00, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x85, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x82, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically.

1 0

Re: [flashrom] need a windows snapshot for flashrom v 0.9.8 or v 0.9.7
by Topolinux 02 Jul '15

02 Jul '15

Hi David G ZHAO, Stefan Tauner is right you have to take a look at the documentations (http://flashrom.org/Downloads#Binary_packages), there it's the answer. Anyway being you unable to compile it by yourself following the instructions, here you go where you can take a chance: http://buildbot.flashrom.org/buildresults/?M=D You may find usable Windows binaries there, but please pay attention that they are usually untested and not recommended to be trusted blindly. You are warned. Regards, Topolinux

1 0

Re: [flashrom] [PATCH 5/5] dediprog: Enable by default.
by Stefan Tauner 01 Jul '15

01 Jul '15

On Sat, 27 Jun 2015 18:50:09 -0700 David Hendricks <david.hendricks(a)gmail.com> wrote: > Acked-by: David Hendricks <dhendrix(a)chromium.org> Well... I certainly would like to see some testing with both protocols before that... :) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

need a windows snapshot for flashrom v 0.9.8 or v 0.9.7
by David G ZHAO 01 Jul '15

01 Jul '15

Dear sir, My name is David Zhao, from Sydney Australia. I was using buspirate for writting firmware for bios on the motherboard. The flashrom I used is 0.9.6.1 only. I did check your link for the new version of flashrom v 0.9.8. I tried a few days to compile version 0.9.8 from your source code, but not being successful. I also notice the snapshots url http://ra.openbios.org/~idwer/flashrom/mingw/ <http://ra.openbios.org/%7Eidwer/flashrom/mingw/> can not be opened. Now I am asking you a big favour, can you please email me the snapshots for the windows command line version (for v0.9.8 or v0.9.7)? Your help is much appreciated Kind regards David Zhao

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom July 2015