flashrom May 2014

flashrom@flashrom.org

46 participants
188 discussions

Re: [flashrom] HP AAHD3-H8 Motherboard flashing with Uno
by Stefan Tauner 02 May '14

02 May '14

On Tue, 21 Jan 2014 17:30:11 -0500 Elvis Kit <elviskit(a)gmail.com> wrote: > Hello, > > I am getting this error message when i attempt to re-flash the bricked bios > of this motherboard. Any help would be greatly appreciated! > > > e6410 Test # flashrom -p serprog:dev=/dev/ttyACM0:2000000 -w HIB_716.ROM > flashrom v0.9.7-r1764 on Linux 3.2.0-4-486 (i686) > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OK. > serprog: Programmer name is "serprog-duino" > Found Winbond flash chip "W25Q16.V" (2048 kB, SPI) on serprog. > Reading old flash chip contents... done. > Erasing and writing flash chip... FAILED at 0x00000000! Expected=0xff, > Found=0x00, failed byte count from 0x00000000-0x00000fff: 0x1000 > ERASE FAILED! > Reading current flash chip contents... done. FAILED at 0x00000000! > Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00007fff: > 0x8000 > ERASE FAILED! > Reading current flash chip contents... Error: invalid response 0x00 from > device > Can't read anymore! Aborting. > FAILED! > Uh oh. Erase/write failed. Checking if anything changed. > Error: invalid response 0x00 from device > Your flash chip is in an unknown state. > Please report this on IRC at chat.freenode.net (channel #flashrom) or > mail flashrom(a)flashrom.org, thanks! > > Thanks in advance! Probably bad wiring. It is also important to connect *all* (input) pins of the flash chip. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Please support my laptop!
by Stefan Tauner 02 May '14

02 May '14

On Thu, 16 Jan 2014 16:39:00 -0800 Max Stevens <max(a)fishlick.com> wrote: > Here's the output of flashrom -V -p internal Hello Max, it is unlikely that flashrom will support your laptop soon-ish, but to preserve the chances we need the output of 'superiotool -deV'. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

flashrom serprog problem
by Juan Lucero 02 May '14

02 May '14

Hi, i have installed flashrom 0.9.7 in my acer laptop with ubuntu 12.04 32 bits. I have a ch341a serial programmer and i am trying to flash a windbond 25q64 memory. I run this: sudo flashrom -V -f -w bravissimo.abs -p serprog:dev=/dev/bus/usb/002/003:19200 and I get this: flashrom v0.9.7-r1711 on Linux 3.2.0-58-generic-pae (i686) flashrom is free software, get the source code athttp://www.flashrom.org <http://www.flashrom.org/>flashrom was built with libpci 3.1.8, GCC 4.6.3, little endian Command line (6 args): flashrom -V -f -w bravissimo.abs -p serprog:dev=/dev/bus/usb/002/003:19200 Calibrating delay loop... OS timer resolution is 1 usecs, 1995M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1007 us, 10000 myus = 10002 us, 4 Initializing serprog programmer Error: Could not fetch original serial port configuration: Inappropriate ioctl for device Error: Programmer initialization failed. Any ideas? Best Regards. Juan. Argentina.- PS: would you like me to translate flashrom to spanish?

2 1

M25PX64 write support
by Zaolin 02 May '14

02 May '14

Hi, the write operation seems to work very well ;). http://paste.flashrom.org/view.php?id=1878 Regards Zaolin

2 2

Success: READ EN25QH64 with buspirate
by Vladimir 'φ-coder/phcoder' Serbinenko 02 May '14

02 May '14

flashrom v0.9.7-r1764 on Linux 3.12-rc7-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.1, GCC 4.8.2, little endian Command line (6 args): ./flashrom -p buspirate_spi:dev=/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A900fzbu-if00-port0,spispeed=1M -r /home/phcoder/x230/orig_bottom.rom -n -V Calibrating delay loop... OS timer resolution is 1 usecs, 929M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 999 us, 10000 myus = 10043 us, 4 myus = 5 us, OK. Initializing buspirate_spi programmer Baud rate is 115200 now. Detected Bus Pirate hardware v3.b Detected Bus Pirate firmware 6.1 Using SPI command set v2. SPI speed is 1MHz Raw bitbang mode version 1 Raw SPI mode version 1 The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Found Eon flash chip "EN25QH64" (8192 kB, SPI) on buspirate_spi. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res3: id1 0x1616, id2 0x16 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1616, id2 0x16 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for SST SST25VF512A, 64 kB: probe_spi_rems: id1 0x1c, id2 0x16 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0x1c, id2 0x16 Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0x1c, id2 0x16 Probing for SST SST25VF020B, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0x1c, id2 0x16 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0x1c, id2 0x16 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Unknown SFDP-capable chip, 0 kB: Parsing JEDEC flash parameter table... done. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x1c, id2 0x16 Found Eon flash chip "EN25QH64" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done. Raw bitbang mode version 1 Bus Pirate shutdown completed.

2 1

Re: [flashrom] TYAN Computer Corp. S2721-533 Thunder i7501 Pro/S2721-533 Thunder i7501 Pro
by Bozhan Boiadzhiev 02 May '14

02 May '14

Hi, i can't remember exactly. I just remember that i didn't have any bad feelings, so i think i updated firmware successfully. PS. I don't have access to that motherboard anymore! Thanks Sorry >-------- Оригинално писмо -------- >От: Stefan Tauner stefan.tauner(a)alumni.tuwien.ac.at >Относно: Re: [flashrom] TYAN Computer Corp. S2721-533 Thunder i7501 Pro/S2721-533 Thunder i7501 Pro >До: Bozhan Boiadzhiev <bozhan(a)abv.bg> >Изпратено на: Петък, 2014, Май 2 21:57:15 EEST > Hello Bozhan, > > thanks for your report! I am just wondering what you want to tell us > with it. :) > Did you update the firmware successfully with flashrom on that board > or did you run into any problems? > -- > Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

flashrom -V of Acer EM61SM/EM61PM (Desktop)
by Benjamin Bellec 02 May '14

02 May '14

Hello, I succesfully flash the BIOS of an Acer Aspire T180 Desktop. Chipset seems to be Nvidia MCP61. At first reboot, motherboard doesn't boot and beep. I had to clear CMOS and then it's OK. As requested by flashrom, here is the flashrom -V : flashrom v0.9.6.1-r1705 on Linux 3.9.5-301.fc19.x86_64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, GCC 4.8.1 20130603 (Red Hat 4.8.1-1), little endian Command line (1 args): flashrom -V Using default programmer "internal". Calibrating delay loop... OS timer resolution is 1 usecs, 531M loops per second, 10 myus = 11 us, 100 myus = 107 us, 1000 myus = 999 us, 10000 myus = 9976 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Acer" DMI string system-product-name: "Aspire T180" DMI string system-version: "R01-A2" DMI string baseboard-manufacturer: "Acer" DMI string baseboard-product-name: "EM61SM/EM61PM " DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8726 on port 0x2e Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Flash bus type is LPC Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0x00000000 MCP SPI is not used. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. Super I/O ID 0x8726 is not on the list of flash capable controllers. The following protocols are supported: LPC. Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x27, id2 0xa0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Found SST flash chip "SST49LF040B" (512 kB, LPC) at physical address 0xfff80000. Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50 Found SST flash chip "SST49LF040B" (512 kB, LPC). No operations were specified. Restoring PCI config space for 00:01:0 reg 0x6d Restoring PCI config space for 00:01:0 reg 0x90 Restoring PCI config space for 00:01:0 reg 0x8c Restoring PCI config space for 00:01:0 reg 0x88

2 1

flashrom
by Michel BOUNY 02 May '14

02 May '14

bonjour ci-joint, fichier, issue de la commande flashrom -V >N68GSFX.txt. mon chipset n'est apparement pas reconnu. pour info merci

2 1

Re: [flashrom] Serprog/Arduino flasher
by Stefan Tauner 02 May '14

02 May '14

On Sat, 14 Dec 2013 02:46:57 -0600 Eric Marks <bigmarkslp(a)gmail.com> wrote: > I successfully used a Arduino Uno as a serprog programmer to program a > SST25VF016B with > Flashrom 0.9.5.2-r1517 on Ubuntu. > > I had tried hooking the eeprom up to the Arduino via level shifting > via resistors, and then via level shifting mosfets + resistors, and finally > via a level conversion chip, but none of them worked reliably. I finally > converted my Ardruino Uno to 3.3v by replacing the regulator. > > http://learn.adafruit.com/arduino-tips-tricks-and-techniques/3-3v-conversion > > This was a much easier solution, and it worked reliably. Once converted to > 3.3v, no extra components are needed. Just wire the eeprom directly to > pins 10,11,12,13, GND, and 5V (which is now actually 3.3v). Remember, > three pins of the eeprom go to 3.3v. > > I still had to slow the UART speed down to 115200 for the Arduino sketch on > the Uno, and while reading took a normal amount of time, it took several > hours to program the chip. I used -VVV to enable very very verbose output > to monitor the progress. > > Could someone update the wiki with this information? It didn't look like > there was any place to sign up and edit it myself. > > http://www.flashrom.org/Serprog/Arduino_flasher > > Thanks for helping me save a server! Thanks for your report and sorry for the late reply. I have created a wiki account for you in case you still want to contribute. The Arduino page requires quite some clean up IIRC. The original author really likes to be verbose... ;) The level shifting is indeed a delicate issue sometimes. Some chips react way worse to imperfect signals than others. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Report: Intel QM67 - Tested OK
by Stefan Tauner 02 May '14

02 May '14

On Wed, 11 Dec 2013 07:55:06 +0100 omr Obermair Thomas <omr(a)keba.com> wrote: > flashrom v0.9.7-r1711 on Linux 3.2.51-keba0-rt72 (i686) > flashrom is free software, get the source code at http://www.flashrom.org > > flashrom was built with libpci 3.1.7, GCC 4.4.5, little endian > Command line (11 args): ./flashrom_eg -p internal -c MX25L6406E/MX25L6436E -l bios.layout -i bios -w EXHR0202_8MB.rom -V > romlayout 00000000 - 005fffff named me > romlayout 00600000 - 007fffff named bios > Using region: "bios". > Calibrating delay loop... OS timer resolution is 1 usecs, 2092M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1002 us, 10000 myus = 10001 us, 4 myus = 5 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: "ADLINK Technology Inc." > DMI string system-product-name: "Express-HR" > DMI string system-version: "72120-0B10-4060" > DMI string baseboard-manufacturer: "To be filled by O.E.M." > DMI string baseboard-product-name: "To be filled by O.E.M." > DMI string baseboard-version: "To be filled by O.E.M." > DMI string chassis-type: "Desktop" > Found chipset "Intel QM67" with PCI ID 8086:1c4f. > This chipset is marked as untested. If you are using an up-to-date version > of flashrom *and* were (not) able to successfully update your firmware with it, > then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. > […] Hello Thomas, thanks for your report! I have added your chipset *and* your board to our list of supported hardware and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom May 2014