flashrom October 2012

flashrom@flashrom.org

26 participants
89 discussions

Re: [flashrom] MX25L1005 report (success)
by Stefan Tauner 02 Oct '12

02 Oct '12

On Mon, 1 Oct 2012 22:14:36 +0300 Давыдов Дмитрий <davydov.dmitr(a)gmail.com> wrote: > All operations (read, erase,write, verify) completed successfully using a > RayeR's SPI programmer. Hello Давыдов, thanks for your report! I have marked the flash chip as fully tested and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Foxconn P55mx\H55mx
by Stefan Tauner 01 Oct '12

01 Oct '12

On Mon, 1 Oct 2012 06:46:26 +0400 Владислав Быков <vladislavbyk1(a)gmail.com> wrote: > Error: Image size doesn't match So you try to use a firmware image that is not exactly the size of the flash chip. This almost always indicates that you are using the wrong file or that it needs some preparation before it can be used. Where did you get that file from? in the last update for the h55mx-s there is a .bin file that looks like it should work: http://www.foxconnchannel.com/driverdownload/Motherboard/Intel/Socket1156/P… try the file named 996F1P07.bin -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

[PATCH] Let the dummy programmer emulate SPI payload limitations.
by Stefan Tauner 01 Oct '12

01 Oct '12

As long as a programmer's check_trans code does not rely on the previous invocation of its init function one can trivially set that programmer's check_trans function instead of the dummy's default one. This allows for even better testing of the SPI infrastructure code under near realworld conditions. FIXME: add other programmers FIXME: add manpage doc Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- While continuing working on this patch set, i got a little idea. This is the result and i love it. Refactoring this stuff pays off! :) NB: This patch might not apply to the previous patch set, preview only. dummyflasher.c | 15 ++++++++++++++- programmer.h | 2 ++ wbsio_spi.c | 2 +- 3 files changed, 17 insertions(+), 2 deletions(-) diff --git a/dummyflasher.c b/dummyflasher.c index edd5714..d2f277b 100644 --- a/dummyflasher.c +++ b/dummyflasher.c @@ -119,7 +119,7 @@ static uint32_t dummy_chip_readl(const struct flashctx *flash, static void dummy_chip_readn(const struct flashctx *flash, uint8_t *buf, const chipaddr addr, size_t len); -static const struct spi_programmer spi_programmer_dummyflasher = { +static struct spi_programmer spi_programmer_dummyflasher = { .type = SPI_CONTROLLER_DUMMY, .max_data_read = MAX_DATA_READ_UNLIMITED, .max_data_write = MAX_DATA_UNSPECIFIED, @@ -374,6 +374,19 @@ int dummy_init(void) msg_pdbg("Initial status register is set to 0x%02x.\n", emu_status); } + tmp = extract_programmer_param("spi_prog"); + if (tmp) { + if (!strcmp(tmp, "wbsio")) { + spi_programmer_dummyflasher.check_trans = wbsio_spi_check_trans; + msg_pdbg("Using SPI payload limitations of the %s programmer.\n", tmp); + } else { + msg_perr("Error: emulation of a programmer requested, " + "but the programmer could not be parsed \"%s\".\n", tmp); + free(tmp); + return 1; + } + } + free(tmp); #endif msg_pdbg("Filling fake flash chip with 0xff, size %i\n", emu_chip_size); diff --git a/programmer.h b/programmer.h index a438ec6..aa82c2e 100644 --- a/programmer.h +++ b/programmer.h @@ -586,6 +586,8 @@ int mcp6x_spi_init(int want_spi); int sb600_probe_spi(struct pci_dev *dev); /* wbsio_spi.c */ +int wbsio_spi_check_trans(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr); int wbsio_check_for_spi(void); #endif diff --git a/wbsio_spi.c b/wbsio_spi.c index 66f9e51..0b15ff5 100644 --- a/wbsio_spi.c +++ b/wbsio_spi.c @@ -108,7 +108,7 @@ static uint8_t determine_mode(struct flashctx *flash, unsigned int writecnt, uns return 0; } -static int wbsio_spi_check_trans(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, +int wbsio_spi_check_trans(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr) { if (determine_mode(flash, writecnt, readcnt, writearr) == 0) -- Kind regards, Stefan Tauner

1 0

#7: Using serprog to flash a winbond W25Q16
by flashrom 01 Oct '12

01 Oct '12

#7: Using serprog to flash a winbond W25Q16 ----------------------------------+------------------------------- Reporter: anonymous | Owner: hailfinger Type: defect | Status: new Priority: major | Milestone: flashrom 0.9.2 Component: flashrom | Version: 0.9.0 Keywords: Single byte read | Dependencies: Patch Status: there is no patch | ----------------------------------+------------------------------- I am using an arduino Uno to flash a winbond W25Q16, and I'm getting an error: Single byte read not supported. I am using Flashrom v0.9.4-r1394, linux 3.0.0-12-generic (i686), built w/ libpci 3.1.7, Gcc 4.6.1. On an Ubuntu 11.10 32bit release. I get the error when I use: $ flashrom -p serprog:dev=/dev/ttyACM0:2000000 -w /home/jpl/716.rom or any command like reading the bios. Just looking for some help, I couldn't find anything when searching. Thanks. Brandon -- Ticket URL: <http://www.flashrom.org/trac/flashrom/ticket/7> flashrom <http://www.flashrom.org/>

1 2

[commit] r1611 - trunk
by repository service 01 Oct '12

01 Oct '12

Author: stefanct Date: Tue Oct 2 00:45:08 2012 New Revision: 1611 URL: http://flashrom.org/trac/flashrom/changeset/1611 Log: Add support for SST's 25WF series of SPI flash chips. This includes SST25WF512, SST25WF010, SST25WF020 and SST25WF040. They require a VCC of 1.65 - 1.95V, which is why i could not test them. The SOIC version of the SST25WF512 is used on an AMD X300-based graphics card i own. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed Sep 26 02:48:16 2012 (r1610) +++ trunk/flashchips.c Tue Oct 2 00:45:08 2012 (r1611) @@ -6635,6 +6635,148 @@ { .vendor = "SST", + .name = "SST25WF512", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25WF512, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {1024 * 64, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 64, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .unlock = spi_disable_blockprotect, + .write = spi_aai_write, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, + }, + + { + .vendor = "SST", + .name = "SST25WF010", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25WF010, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {1024 * 128, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 128, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .unlock = spi_disable_blockprotect, + .write = spi_aai_write, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, + }, + + { + .vendor = "SST", + .name = "SST25WF020", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25WF020, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 256, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 256, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .unlock = spi_disable_blockprotect, + .write = spi_aai_write, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, + }, + + { + .vendor = "SST", + .name = "SST25WF040", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25WF040, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 512, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 512, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .unlock = spi_disable_blockprotect, + .write = spi_aai_write, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, + }, + + { + .vendor = "SST", .name = "SST28SF040A", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID,

1 0

MX25L1005 report (success)
by Давыдов Дмитрий 01 Oct '12

01 Oct '12

All operations (read, erase,write, verify) completed successfully using a RayeR's SPI programmer.

1 0

verbose log of unsupported mainboard Foxconn Q45M
by Mendler, Marc (STL) 01 Oct '12

01 Oct '12

Hi there, we have a value of 150 machines with foxconn's Q45M. Last year we had to configure the bios settings of each machine by hand, because we were not able to deploy our bios settings to this mainboard in our standard way (boot via pxe, load a dos with a bios flash tool and an image of an configured bios and flash this image to the mainboard). Today i tried your flashrom tool (v0.9.5.2-r1515) build in parted magic but with no luck. I attached a verbose log of flashrom to this e-mail. Keep up the good work! Sincere regards, Marc Mendler ------------------------------ Statistisches Landesamt Baden-Württemberg Ref. 14 (Dezentrale Systemtechnik) Böblinger Str. 68 70199 Stuttgart Tel.: 0711/641-2827 Fax : 0711/641-2440 E-Mail: poststelle(a)stala.bwl.de Internet: www.statistik-bw.de ------------------------------

4 10

Reading MacBookPro5,4 flash results in garbage
by Natalia Portillo 01 Oct '12

01 Oct '12

Hi, I've tried to read MacBookPro5,4 flash, and while flashrom have not bricked my machine, correctly detected the chip size and read it, the read results are a mixture of garbage consisiting of parts from firmware, RAM, OTP and NVRAM. Doing an examination of the dump I've found that it contains among other things, my favourite wifis (from NVRAM), the machine serial number (from OTP I suppose), the Linux kernel messages (from RAM) and PE executables (from the firmware). claunia@seshat ~ $ time sudo flashrom -p internal:laptop=force_I_want_a_brick -V -r mbp54.bin flashrom v0.9.6-r1559 on Linux 3.2.11-gentoo (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with unknown PCI library, GCC 4.5.3, big endian Command line (5 args): flashrom -p internal:laptop=force_I_want_a_brick -V -r mbp54_2.bin Calibrating delay loop... OS timer resolution is 1 usecs, 2507M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1001 us, 10000 myus = 10002 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Apple Inc." DMI string system-product-name: "MacBookPro5,4" DMI string system-version: "1.0" DMI string baseboard-manufacturer: "Apple Inc." DMI string baseboard-product-name: "Mac-F22587A1" DMI string baseboard-version: "MacBookPro5,4" DMI string chassis-type: "Notebook" Laptop detected via DMI. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Proceeding anyway because user forced us to. Found chipset "NVIDIA MCP79" with PCI ID 10de:0aae. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:0aa2 at 00:03:2 MCP SPI BAR is at 0xd3500000 Mapping NVIDIA MCP6x SPI at 0xd3500000, unaligned size 0x544. SPI control is 0xc012, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0xbf, id2 0x4a Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0xbf, id2 0x4a Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xbf, id2 0x4a Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Chip status register is 00 Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found SST flash chip "SST25VF032B" (4096 kB, SPI) at physical address 0xffc00000. Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xbf, id2 0x4a Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xbf, id2 0x4a Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x254a Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xbf, id2 0x4a Found SST flash chip "SST25VF032B" (4096 kB, SPI). Reading flash... done. real 3m19.243s user 3m18.534s sys 0m0.665s claunia@seshat ~ $ sudo lspci -vvnnxx 00:00.0 Host bridge [0600]: NVIDIA Corporation MCP79 Host Bridge [10de:0a82] (rev b1) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: de 10 82 0a 06 00 a0 00 b1 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.1 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0a88] (rev b1) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: de 10 88 0a 04 00 a0 00 b1 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:03.0 ISA bridge [0601]: NVIDIA Corporation MCP79 LPC Bridge [10de:0aae] (rev b3) Subsystem: NVIDIA Corporation Device [10de:cb79] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: I/O ports at 2000 [size=256] 00: de 10 ae 0a 0f 00 a0 00 b3 00 01 06 00 00 80 00 10: 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 79 cb 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 00:03.1 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0aa4] (rev b1) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: de 10 a4 0a 00 04 a0 00 b1 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:03.2 SMBus [0c05]: NVIDIA Corporation MCP79 SMBus [10de:0aa2] (rev b1) Subsystem: NVIDIA Corporation Device [10de:cb79] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 2180 [disabled] [size=64] Region 4: I/O ports at 2140 [disabled] [size=64] Region 5: I/O ports at 2100 [disabled] [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00: de 10 a2 0a 00 00 b0 00 b1 00 05 0c 00 00 80 00 10: 81 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 21 00 00 01 21 00 00 00 00 00 00 de 10 79 cb 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 01 00 00 00:03.3 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0a89] (rev b1) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: de 10 89 0a 00 00 20 00 b1 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:03.4 RAM memory [0500]: NVIDIA Corporation Device [10de:0a98] (rev b1) Subsystem: NVIDIA Corporation Device [10de:cb79] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: de 10 98 0a 00 04 a0 00 b1 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 79 cb 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:03.5 Co-processor [0b40]: NVIDIA Corporation MCP79 Co-processor [10de:0aa3] (rev b1) Subsystem: NVIDIA Corporation Device [10de:cb79] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 23 Region 0: Memory at d3500000 (32-bit, non-prefetchable) [size=512K] Kernel modules: nvidia 00: de 10 a3 0a 06 00 a0 00 b1 00 40 0b 00 00 80 00 10: 00 00 50 d3 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 79 cb 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 03 01 00:04.0 USB controller [0c03]: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) (prog-if 10 [OHCI]) Subsystem: NVIDIA Corporation Device [10de:cb79] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at d3588000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd 00: de 10 a5 0a 07 00 b0 00 b1 10 03 0c 00 00 80 00 10: 00 80 58 d3 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 79 cb 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 01 03 01 00:04.1 USB controller [0c03]: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) (prog-if 20 [EHCI]) Subsystem: NVIDIA Corporation Device [10de:cb79] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at d3589200 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=00a0 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00: de 10 a6 0a 06 00 b0 00 b1 20 03 0c 00 00 80 00 10: 00 92 58 d3 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 79 cb 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 02 03 01 00:06.0 USB controller [0c03]: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1) (prog-if 10 [OHCI]) Subsystem: NVIDIA Corporation Device [10de:cb79] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 18 Region 0: Memory at d3587000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd 00: de 10 a7 0a 07 00 b0 00 b1 10 03 0c 00 00 80 00 10: 00 70 58 d3 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 79 cb 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 01 03 01 00:06.1 USB controller [0c03]: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1) (prog-if 20 [EHCI]) Subsystem: NVIDIA Corporation Device [10de:cb79] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 23 Region 0: Memory at d3589100 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=00a0 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00: de 10 a9 0a 06 00 b0 00 b1 20 03 0c 00 00 80 00 10: 00 91 58 d3 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 79 cb 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 02 03 01 00:08.0 Audio device [0403]: NVIDIA Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1) Subsystem: NVIDIA Corporation Device [10de:cb79] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at d3580000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00: de 10 c0 0a 06 00 b0 00 b1 00 03 04 00 00 00 00 10: 00 00 58 d3 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 79 cb 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 01 02 05 00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) (prog-if 01 [Subtractive decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d3400000-d34fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: [b8] Subsystem: NVIDIA Corporation Device [10de:cb79] 00: de 10 ab 0a 06 00 b0 00 b1 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 80 22 20: 40 d3 40 d3 f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 00 02 00:0a.0 Ethernet controller [0200]: NVIDIA Corporation MCP79 Ethernet [10de:0ab0] (rev b1) Subsystem: NVIDIA Corporation Device [10de:cb79] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 45 Region 0: Memory at d3586000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 21e0 [size=8] Region 2: Memory at d3589000 (32-bit, non-prefetchable) [size=256] Region 3: Memory at d3589300 (32-bit, non-prefetchable) [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/16 Maskable+ 64bit+ Address: 00000000fee0300c Data: 41a1 Masking: 0000fffe Pending: 00000000 Kernel driver in use: forcedeth Kernel modules: forcedeth 00: de 10 b0 0a 07 04 b0 00 b1 00 00 02 00 00 00 00 10: 00 60 58 d3 e1 21 00 00 00 90 58 d3 00 93 58 d3 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 79 cb 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 01 01 14 00:0b.0 SATA controller [0106]: NVIDIA Corporation MCP79 AHCI Controller [10de:0ab9] (rev b1) (prog-if 01 [AHCI 1.0]) Subsystem: NVIDIA Corporation Device [10de:cb79] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 43 Region 0: I/O ports at 21d8 [size=8] Region 1: I/O ports at 21ec [size=4] Region 2: I/O ports at 21d0 [size=8] Region 3: I/O ports at 21e8 [size=4] Region 4: I/O ports at 21c0 [size=16] Region 5: Memory at d3584000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] SATA HBA v1.0 InCfgSpace Capabilities: [b0] MSI: Enable+ Count=1/8 Maskable- 64bit+ Address: 00000000fee0300c Data: 4191 Kernel driver in use: ahci 00: de 10 b9 0a 07 04 b0 00 b1 01 06 01 00 00 00 00 10: d9 21 00 00 ed 21 00 00 d1 21 00 00 e9 21 00 00 20: c1 21 00 00 00 40 58 d3 00 00 00 00 de 10 79 cb 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 01 03 01 00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0ac4] (rev b1) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: d3300000-d33fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: NVIDIA Corporation Device [10de:0000] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee0300c Data: 4171 Capabilities: [80] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+ Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Kernel driver in use: pcieport 00: de 10 c4 0a 06 04 10 00 b1 00 04 06 40 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 00 20: 30 d3 30 d3 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00 00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: d2000000-d30fffff Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: NVIDIA Corporation Device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/2 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 00: de 10 a0 0a 07 00 10 00 b1 00 04 06 40 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 11 11 00 00 20: 00 d2 00 d3 01 c0 f1 d1 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 00 00 00:15.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0ac6] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Memory behind bridge: d3200000-d32fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: NVIDIA Corporation Device [10de:0000] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee0300c Data: 4179 Capabilities: [80] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+ Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Kernel driver in use: pcieport 00: de 10 c6 0a 07 04 10 00 b1 00 04 06 40 00 01 00 10: 00 00 00 00 00 00 00 00 00 04 04 00 f1 01 00 00 20: 20 d3 20 d3 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00 00:16.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0ac7] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: d3100000-d31fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: NVIDIA Corporation Device [10de:0000] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee0300c Data: 4181 Capabilities: [80] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+ Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Kernel driver in use: pcieport 00: de 10 c7 0a 07 04 10 00 b1 00 04 06 40 00 01 00 10: 00 00 00 00 00 00 00 00 00 05 05 00 f1 01 00 00 20: 10 d3 10 d3 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce 9400M] [10de:0863] (rev b1) (prog-if 00 [VGA controller]) Subsystem: Apple Inc. Device [106b:00ba] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 1000 [size=128] [virtual] Expansion ROM at d3000000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 00: de 10 63 08 07 00 10 00 b1 00 00 03 00 00 00 00 10: 00 00 00 d2 0c 00 00 c0 00 00 00 00 0c 00 00 d0 20: 00 00 00 00 01 10 00 00 00 00 00 00 6b 10 ba 00 30: 00 00 00 00 60 00 00 00 00 00 00 00 00 01 00 00 04:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) Subsystem: Apple Inc. Device [106b:008d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at d3200000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME- Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [13c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number ############### Capabilities: [16c v1] Power Budgeting <?> Kernel driver in use: b43-pci-bridge Kernel modules: ssb 00: e4 14 2b 43 06 00 10 00 01 00 80 02 40 00 00 00 10: 04 00 20 d3 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 6b 10 8d 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 00 00 05:00.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW643 [TrueFire] PCIe 1394b Controller [11c1:5901] (rev 07) (prog-if 10 [OHCI]) Subsystem: LSI Corporation FW643 [TrueFire] PCIe 1394b Controller [11c1:5900] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at d3100000 (64-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+ Capabilities: [4c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4199 Capabilities: [60] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 2048 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [170 v1] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 00: c1 11 01 59 06 04 10 00 07 10 00 0c 40 00 00 00 10: 04 00 10 d3 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 c1 11 00 59 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 01 00 00

2 1

Foxconn P55mx\H55mx
by Stefan Tauner 30 Sep '12

30 Sep '12

Hello Vladislav! You have visited our IRC channel briefly and mentioned the Foxconn board together with a short, but interesting snippet of flashrom output. Can you please send us the complete output of flashrom --programmer internal -V (you can use the --output option to log to a file directly). How did flashing the board worked out for you in the end? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom October 2012