flashrom July 2011

flashrom@flashrom.org

50 participants
275 discussions

Re: [flashrom] Additional voltages
by Stefan Tauner 19 Jul '11

19 Jul '11

On Mon, 18 Jul 2011 17:42:35 -0400 Steven Zakulec <spzakulec(a)gmail.com> wrote: > I've dropped the Intel one for now while I look more closely at it. > Otherwise, I just adjusted all the comments to fit your suggestions. great! Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> and commited in r1375 PS: please don't full quote the whole patch (+ and reviewer comments), if you don't add something in between -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Macronix MX25L6445E
by Stefan Reinauer 19 Jul '11

19 Jul '11

* Wagner, Helge (GE Intelligent Platforms) <Helge.Wagner(a)ge.com> [110527 15:46]: > To be sure that the spi_block_erase_20 works for both the MX25L6405 and the > MX25L6445E, we could change the block erase size from 64K to 4K. This should > work even for the MX25L6405, but with the side effect of the erase taking > longer than needed. > > > > Any comments? works great for me! > Please find my patches included. > > Signed-off-by: Helge Wagner <helge.wagner(a)ge.com> Acked-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org>

3 3

ASD AE29F1008 (same id as W29C010M et al)
by Stefan Tauner 19 Jul '11

19 Jul '11

aHardyX on IRC reported: "you can add the ASD AE29F1008 in the supported chips list! […] it wrote without any errors but it does have a timing issue! <stefanct> ah so the desktop environment was making the timing unreliable? <aHardyX> yes <stefanct> was the chip detected on the desktop at all? <aHardyX> yes it was detected <stefanct> but erasing/writing failed <aHardyX> it did erase with -E but it failed at writing can we do anything about that? should i add the AE29F1008 to the (long) name list of W29C010M variants? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[PATCH] Fix and clean up cli_classic.c
by Carl-Daniel Hailfinger 19 Jul '11

19 Jul '11

Don't ignore -i if it is specified before -l Check if image mentioned by -i is present in layout file Clean up cli_classic.c: - Consolidate duplicated programmer_shutdown calls - Kill outdated comments - Finish parameter checking before -L/-z is executed This patch was inspired by a cleanup patch by Stefan Tauner. I did not fix up the -i/-l ordering dependency because the new layout code may have different requirements anyway, and introducing gratuitous user interface changes would be a bad idea. Side note: This also reduces the amount of code changes needed for the logfile patch. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-cli_classic_cleanup/cli_classic.c =================================================================== --- flashrom-cli_classic_cleanup/cli_classic.c (Revision 1372) +++ flashrom-cli_classic_cleanup/cli_classic.c (Arbeitskopie) @@ -117,6 +117,7 @@ #endif int operation_specified = 0; int i; + int ret = 0; static const char optstring[] = "r:Rw:v:nVEfc:m:l:i:p:Lzh"; static const struct option long_options[] = { @@ -232,8 +233,14 @@ cli_classic_abort_usage(); break; case 'i': + /* FIXME: -l has to be specified before -i. */ tempstr = strdup(optarg); - find_romentry(tempstr); + if (find_romentry(tempstr)) { + fprintf(stderr, "Error: image %s not found in " + "layout file or -i specified before " + "-l\n", tempstr); + cli_classic_abort_usage(); + } break; case 'L': if (++operation_specified > 1) { @@ -313,6 +320,11 @@ } } + if (optind < argc) { + fprintf(stderr, "Error: Extra parameter found.\n"); + cli_classic_abort_usage(); + } + /* FIXME: Print the actions flashrom will take. */ if (list_supported) { @@ -327,11 +339,6 @@ } #endif - if (optind < argc) { - fprintf(stderr, "Error: Extra parameter found.\n"); - cli_classic_abort_usage(); - } - #if CONFIG_INTERNAL == 1 if ((programmer != PROGRAMMER_INTERNAL) && (lb_part || lb_vendor)) { fprintf(stderr, "Error: --mainboard requires the internal " @@ -360,8 +367,8 @@ if (programmer_init(pparam)) { fprintf(stderr, "Error: Programmer initialization failed.\n"); - programmer_shutdown(); - exit(1); + ret = 1; + goto out_shutdown; } for (i = 0; i < ARRAY_SIZE(flashes); i++) { @@ -377,8 +384,8 @@ for (i = 0; i < chipcount; i++) printf(" %s", flashes[i].name); printf("\nPlease specify which chip to use with the -c <chipname> option.\n"); - programmer_shutdown(); - exit(1); + ret = 1; + goto out_shutdown; } else if (!chipcount) { printf("No EEPROM/flash device found.\n"); if (!force || !chip_to_probe) { @@ -389,15 +396,14 @@ startchip = probe_flash(0, &flashes[0], 1); if (startchip == -1) { printf("Probing for flash chip '%s' failed.\n", chip_to_probe); - programmer_shutdown(); - exit(1); + ret = 1; + goto out_shutdown; } printf("Please note that forced reads most likely contain garbage.\n"); return read_flash_to_file(&flashes[0], filename); } - // FIXME: flash writes stay enabled! - programmer_shutdown(); - exit(1); + ret = 1; + goto out_shutdown; } fill_flash = &flashes[0]; @@ -409,22 +415,19 @@ (!force)) { fprintf(stderr, "Chip is too big for this programmer " "(-V gives details). Use --force to override.\n"); - programmer_shutdown(); - return 1; + ret = 1; + goto out_shutdown; } if (!(read_it | write_it | verify_it | erase_it)) { printf("No operations were specified.\n"); - // FIXME: flash writes stay enabled! - programmer_shutdown(); - exit(0); + goto out_shutdown; } if (!filename && !erase_it) { printf("Error: No filename specified.\n"); - // FIXME: flash writes stay enabled! - programmer_shutdown(); - exit(1); + ret = 1; + goto out_shutdown; } /* Always verify write operations unless -n is used. */ @@ -437,4 +440,8 @@ */ programmer_delay(100000); return doit(fill_flash, force, filename, read_it, write_it, erase_it, verify_it); + +out_shutdown: + programmer_shutdown(); + return ret; } -- http://www.hailfinger.org/

3 4

[commit] r1374 - trunk
by repository service 19 Jul '11

19 Jul '11

Author: stefanct Date: Tue Jul 19 09:58:06 2011 New Revision: 1374 URL: http://flashrom.org/trac/flashrom/changeset/1374 Log: fix a bug breaking layout file handling in r1373 Florian Zumbiehl discovered that we have broken the -i switch in the last commit resulting in self-contradictory output: http://paste.flashrom.org/view.php?id=707 Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/cli_classic.c Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Sat Jul 16 01:47:45 2011 (r1373) +++ trunk/cli_classic.c Tue Jul 19 09:58:06 2011 (r1374) @@ -235,7 +235,7 @@ case 'i': /* FIXME: -l has to be specified before -i. */ tempstr = strdup(optarg); - if (find_romentry(tempstr)) { + if (find_romentry(tempstr) < 0) { fprintf(stderr, "Error: image %s not found in " "layout file or -i specified before " "-l\n", tempstr);

1 0

a truly dumb compaq BIOS
by Viv Eshwar 19 Jul '11

19 Jul '11

((So, your program talked to me as per this:)) Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. ((So here's what you asked for. Have a ball! I'm having a lot of fun with my Debian OS, but this machine has just been fighting it all the way down the line, and now I'm locked out of the BIOS. It really, really wants to belong to microsoft! If you can help me fix it, I'd appreciate it. Thanks, Viveshwar. )) This chipset supports the following protocols: SPI. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Chip status register is 9c Found chip "Winbond W25x80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xef, id2 0x13 No operations were specified. root@debian:/home/viveshwar#

2 1

Re: [flashrom] Additional voltages
by Stefan Tauner 18 Jul '11

18 Jul '11

On Fri, 15 Jul 2011 23:26:23 -0400 Steven Zakulec <spzakulec(a)gmail.com> wrote: > I believe I've adjusted the phrasings so there's one style for each comment > type. almost ;) > The only issue I've come across is the Intel 28F002BC/BL/BV/BX-T. > From my reading of the datasheets, the later two are compatible with each > other voltage-wise, but the BC and BL versions are definitely not- they have > non-overlapping ranges for reading. i have looked at 29044901.pdf (28F002BL) and 29053105.pdf (28F002BV) briefly, but could not see the issue. what is the problem exactly, where should i look? > Index: flashchips.c > =================================================================== > --- flashchips.c (revision 1373) > +++ flashchips.c (working copy) > @@ -86,92 +86,93 @@ > > { > .vendor = "AMD", > .name = "Am29F002(N)BB", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29F002BB, > .total_size = 256, > .page_size = 256, > .feature_bits = FEATURE_SHORT_RESET | FEATURE_ADDR_2AA, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {16 * 1024, 1}, > {8 * 1024, 2}, > {32 * 1024, 1}, > {64 * 1024, 3}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > - .voltage = {4750, 5250}, /* -55 speed is +-5%, all others +-10% */ > + .voltage = {4750, 5250}, /* -55 speed is 4.75-5.25V, others 4.5-5.5V */ > }, > > { > .vendor = "AMD", > .name = "Am29F002(N)BT", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29F002BT, > .total_size = 256, > .page_size = 256, > .feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_2AA, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {64 * 1024, 3}, > {32 * 1024, 1}, > {8 * 1024, 2}, > {16 * 1024, 1}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {4750, 5250}, /* -55 speed is 4.75-5.25V, others 4.5-5.5V */ > }, > > { > .vendor = "AMD", > .name = "Am29F016D", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29F016D, > .total_size = 2 * 1024, > .page_size = 64 * 1024, > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 32} }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {2048 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > .voltage = {4500, 5500}, > }, > > { > @@ -229,330 +230,338 @@ > }, > > { > .vendor = "AMD", > .name = "Am29LV001BB", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29LV001BB, > .total_size = 128, > .page_size = 64 * 1024, /* unused */ > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, > .tested = TEST_OK_PREW, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {8 * 1024, 1}, > {4 * 1024, 2}, > {16 * 1024, 7}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {128 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {3000, 3600}, /* -45R speed is 3.0-3.6V, others 2.7-3.6V */ > }, > > { > .vendor = "AMD", > .name = "Am29LV001BT", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29LV001BT, > .total_size = 128, > .page_size = 64 * 1024, /* unused */ > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {16 * 1024, 7}, > {4 * 1024, 2}, > {8 * 1024, 1}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {128 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {3000, 3600}, /* -45R speed is 3.0-3.6V, others 2.7-3.6V */ > }, > > { > .vendor = "AMD", > .name = "Am29LV002BB", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29LV002BB, > .total_size = 256, > .page_size = 64 * 1024, /* unused */ > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {16 * 1024, 1}, > {8 * 1024, 2}, > {32 * 1024, 1}, > {64 * 1024, 3}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {3000, 3600}, /* -55 speed is 3.0-3.6V, others 2.7-3.6V */ > }, > > { > .vendor = "AMD", > .name = "Am29LV002BT", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29LV002BT, > .total_size = 256, > .page_size = 64 * 1024, /* unused */ > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {64 * 1024, 3}, > {32 * 1024, 1}, > {8 * 1024, 2}, > {16 * 1024, 1}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {3000, 3600}, /* -55 speed is 3.0-3.6V, others 2.7-3.6V */ > }, > > { > .vendor = "AMD", > .name = "Am29LV004BB", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29LV004BB, > .total_size = 512, > .page_size = 64 * 1024, /* unused */ > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {16 * 1024, 1}, > {8 * 1024, 2}, > {32 * 1024, 1}, > {64 * 1024, 7}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "AMD", > .name = "Am29LV004BT", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29LV004BT, > .total_size = 512, > .page_size = 64 * 1024, /* unused */ > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {64 * 1024, 7}, > {32 * 1024, 1}, > {8 * 1024, 2}, > {16 * 1024, 1}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "AMD", > .name = "Am29LV008BB", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29LV008BB, > .total_size = 1024, > .page_size = 64 * 1024, /* unused */ > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {16 * 1024, 1}, > {8 * 1024, 2}, > {32 * 1024, 1}, > {64 * 1024, 15}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {3000, 3600} /* -70R is 3.0-3.6V, others 2.7-3.6V */ before you have used this (note the additional word "speed"): .voltage = {3000, 3600}, /* -55 speed is 3.0-3.6V, others 2.7-3.6V */> }, please change all of those lines to: .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ etc. > > { > .vendor = "AMD", > .name = "Am29LV008BT", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29LV008BT, > .total_size = 1024, > .page_size = 64 * 1024, /* unused */ > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {64 * 1024, 15}, > {32 * 1024, 1}, > {8 * 1024, 2}, > {16 * 1024, 1}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {3000, 3600} /* -70R is 3.0-3.6V, others 2.7-3.6V */ same here > }, > > { > .vendor = "AMD", > .name = "Am29LV040B", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29LV040B, > .total_size = 512, > .page_size = 64 * 1024, > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, > .tested = TEST_OK_PRE, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > - .voltage = {2700, 3600}, > + .voltage = {3000, 3600}, /* -60R is 3.0-3.6V, others 2.7-3.6V*/ and here > }, > > { > .vendor = "AMD", > .name = "Am29LV081B", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = AMD_ID, > .model_id = AMD_AM29LV080B, > .total_size = 1024, > .page_size = 64 * 1024, > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, /* datasheet specifies address as don't care */ > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 16} }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > - .voltage = {2700, 3600}, > + .voltage = {3000, 3600}, /* -70R is 3.0-3.6V, others 2.7-3.6V */ and here > }, > > { > .vendor = "AMIC", > .name = "A25L05PT", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = AMIC_ID, > .model_id = AMIC_A25L05PT, > .total_size = 64, > .page_size = 256, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid4, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {32 * 1024, 1}, > {16 * 1024, 1}, > {8 * 1024, 1}, > {4 * 1024, 2}, > }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {64 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .printlock = spi_prettyprint_status_register_amic_a25l05p, > .unlock = spi_disable_blockprotect, > @@ -564,60 +573,61 @@ > { > .vendor = "AMIC", > .name = "A25L05PU", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = AMIC_ID, > .model_id = AMIC_A25L05PU, > .total_size = 64, > .page_size = 256, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid4, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {4 * 1024, 2}, > {8 * 1024, 1}, > {16 * 1024, 1}, > {32 * 1024, 1}, > }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {64 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .printlock = spi_prettyprint_status_register_amic_a25l05p, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_256, > .read = spi_chip_read, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "AMIC", > .name = "A25L10PT", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = AMIC_ID, > .model_id = AMIC_A25L10PT, > .total_size = 128, > .page_size = 256, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid4, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { > {64 * 1024, 1}, > {32 * 1024, 1}, > {16 * 1024, 1}, > {8 * 1024, 1}, > {4 * 1024, 2}, > }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {128 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .printlock = spi_prettyprint_status_register_amic_a25l05p, > @@ -1305,99 +1315,99 @@ > .model_id = ATMEL_AT25DF021, > .total_size = 256, > .page_size = 256, > .feature_bits = FEATURE_WRSR_WREN, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 64} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 8} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {64 * 1024, 4} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .printlock = spi_prettyprint_status_register_at25df, > .unlock = spi_disable_blockprotect_at25df, > .write = spi_chip_write_256, > .read = spi_chip_read, > - .voltage = {2300, 3600}, /* Datasheet says 2.3-3.6V or 2.7-3.6V */ > + .voltage = {2700, 3600}, /* Datasheet says there's a 2.3-3.6V & 2.7-3.6V model */ .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ would be terser, but it is ok as it is too. if you change it, please change all occurrences alike. > }, > > { > .vendor = "Atmel", > .name = "AT25DF041A", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ATMEL_ID, > .model_id = ATMEL_AT25DF041A, > .total_size = 512, > .page_size = 256, > .feature_bits = FEATURE_WRSR_WREN, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 128} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 16} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .printlock = spi_prettyprint_status_register_at25df, > .unlock = spi_disable_blockprotect_at25df, > .write = spi_chip_write_256, > .read = spi_chip_read, > - .voltage = {2300, 3600}, /* Datasheet says 2.3-3.6V or 2.7-3.6V */ > + .voltage = {2700, 3600}, /* Datasheet says there's a 2.3-3.6V & 2.7-3.6V model */ > }, > > { > .vendor = "Atmel", > .name = "AT25DF081", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ATMEL_ID, > .model_id = ATMEL_AT25DF081, > .total_size = 1024, > .page_size = 256, > .feature_bits = FEATURE_WRSR_WREN, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 256} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 32} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {64 * 1024, 16} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > @@ -1419,60 +1429,61 @@ > .model_id = ATMEL_AT25DF081A, > .total_size = 1024, > .page_size = 256, > .feature_bits = FEATURE_WRSR_WREN, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 256} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 32} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {64 * 1024, 16} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .printlock = spi_prettyprint_status_register_at25df_sec, > .unlock = spi_disable_blockprotect_at25df_sec, > .write = spi_chip_write_256, > .read = spi_chip_read, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "Atmel", > .name = "AT25DF161", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ATMEL_ID, > .model_id = ATMEL_AT25DF161, > .total_size = 2048, > .page_size = 256, > .feature_bits = FEATURE_WRSR_WREN, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 512} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 64} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {64 * 1024, 32} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {2 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {2 * 1024 * 1024, 1} }, > @@ -1746,61 +1757,61 @@ > .block_erase = spi_block_erase_c7, > } > }, > .printlock = spi_prettyprint_status_register_at25fs040, > .unlock = spi_disable_blockprotect_at25fs040, > .write = spi_chip_write_256, > .read = spi_chip_read, > .voltage = {2700, 3600}, > }, > > { > .vendor = "Atmel", > .name = "AT26DF041", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ATMEL_ID, > .model_id = ATMEL_AT26DF041, > .total_size = 512, > .page_size = 256, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 128} }, > .block_erase = spi_block_erase_20, > } > }, > .write = NULL /* Incompatible Page write */, > .read = spi_chip_read, > - .voltage = {2700, 3600}, /* Datasheet says 3.0-3.6 V or 2.7-3.6 V */ > + .voltage = {2700, 3600}, /* 3.0-3.6V for higher speed, 2.7-3.6V normal */ > }, > > { > .vendor = "Atmel", > .name = "AT26DF081A", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ATMEL_ID, > .model_id = ATMEL_AT26DF081A, > .total_size = 1024, > .page_size = 256, > .feature_bits = FEATURE_WRSR_WREN, > .tested = TEST_OK_PREW, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 256} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 32} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {64 * 1024, 16} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > @@ -2087,77 +2098,77 @@ > > { > .vendor = "Atmel", > .name = "AT45DB041D", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ATMEL_ID, > .model_id = ATMEL_AT45DB041D, > .total_size = 512 /* Size can only be determined from status register */, > .page_size = 256 /* Size can only be determined from status register */, > .tested = TEST_BAD_READ, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .write = NULL, > .read = NULL, > .voltage = {2500, 3600}, /* Datasheet says 2.5-3.6 V or 2.7-3.6 V */ what about this one btw? > }, > > { > .vendor = "Atmel", > .name = "AT45DB081D", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ATMEL_ID, > .model_id = ATMEL_AT45DB081D, > .total_size = 1024 /* Size can only be determined from status register */, > .page_size = 256 /* Size can only be determined from status register */, > .tested = TEST_BAD_READ, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .write = NULL, > .read = NULL, > - .voltage = {2500, 3600}, /* Datasheet says 2.5-3.6 V or 2.7-3.6 V */ > + .voltage = {2700, 3600}, /* Datasheet says there's a 2.5-3.6V & 2.7-3.6V model */ > > }, > > { > .vendor = "Atmel", > .name = "AT45DB161D", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ATMEL_ID, > .model_id = ATMEL_AT45DB161D, > .total_size = 2048 /* Size can only be determined from status register */, > .page_size = 512 /* Size can only be determined from status register */, > .tested = TEST_BAD_READ, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .write = NULL, > .read = NULL, > - .voltage = {2500, 3600}, /* Datasheet says 2.5-3.6 V or 2.7-3.6 V */ > + .voltage = {2700, 3600}, /* Datasheet says there's a 2.5-3.6V & 2.7-3.6V model */ > }, > > { > .vendor = "Atmel", > .name = "AT45DB321C", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ATMEL_ID, > .model_id = ATMEL_AT45DB321C, > .total_size = 4224 /* No power of two sizes */, > .page_size = 528 /* No power of two sizes */, > .tested = TEST_BAD_READ, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .write = NULL, > .read = NULL /* Incompatible read */, > .voltage = {2700, 3600}, > }, > > { > .vendor = "Atmel", > .name = "AT45DB321D", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ATMEL_ID, > .model_id = ATMEL_AT45DB321D, > .total_size = 4096 /* Size can only be determined from status register */, > .page_size = 512 /* Size can only be determined from status register */, > .tested = TEST_BAD_READ, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .write = NULL, > @@ -2290,60 +2301,61 @@ > }, > .write = write_jedec_1, > .read = read_memmapped, > .voltage = {4500, 5500}, > }, > > { > .vendor = "Bright", > .name = "BM29F040", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = BRIGHT_ID, > .model_id = BRIGHT_BM29F040, > .total_size = 512, > .page_size = 64 * 1024, > .feature_bits = FEATURE_EITHER_RESET, > .tested = TEST_OK_PR, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {4500, 5500}, > }, > > { > .vendor = "EMST", > .name = "F49B002UA", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = EMST_ID, > .model_id = EMST_F49B002UA, > .total_size = 256, > .page_size = 4096, > .feature_bits = FEATURE_EITHER_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ > .block_erasers = > { > { > .eraseblocks = { > {128 * 1024, 1}, > {96 * 1024, 1}, > {8 * 1024, 2}, > {16 * 1024, 1}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > } > }, > .write = write_jedec_1, > @@ -3415,119 +3427,120 @@ > > { > .vendor = "Hyundai", > .name = "HY29F002T", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = HYUNDAI_ID, > .model_id = HYUNDAI_HY29F002T, > .total_size = 256, > .page_size = 256 * 1024, > .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ > .tested = TEST_OK_PRE, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ > .block_erasers = > { > { > .eraseblocks = { > {64 * 1024, 3}, > {32 * 1024, 1}, > {8 * 1024, 2}, > {16 * 1024, 1}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > - .voltage = {4750, 5250}, /* 5.0V +-5% for -45 model, +-10% for rest */ > + .voltage = {4750, 5250}, /* -45 speed is 4.75-5.25V, others 4.5-5.5V */ please change to: .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ > }, > > { > .vendor = "Hyundai", > .name = "HY29F002B", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = HYUNDAI_ID, > .model_id = HYUNDAI_HY29F002B, > .total_size = 256, > .page_size = 256 * 1024, > .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ > .block_erasers = > { > { > .eraseblocks = { > {16 * 1024, 1}, > {8 * 1024, 2}, > {32 * 1024, 1}, > {64 * 1024, 3}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > - .voltage = {4750, 5250}, /* 5.0V +-5% for -45 model, +-10% for rest */ > + .voltage = {4750, 5250}, /* -45 speed is 4.75-5.25V, others 4.5-5.5V */ same here > }, > > { > .vendor = "Hyundai", > .name = "HY29F040A", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = HYUNDAI_ID, > .model_id = HYUNDAI_HY29F040A, > .total_size = 512, > .page_size = 64 * 1024, > .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {4500, 5500}, > }, > > { > .vendor = "Intel", > .name = "28F001BN/BX-B", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = INTEL_ID, > .model_id = INTEL_28F001B, > .total_size = 128, > .page_size = 128 * 1024, /* 8k + 2x4k + 112k */ > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ > .block_erasers = > { > { > .eraseblocks = { > {8 * 1024, 1}, > {4 * 1024, 2}, > {112 * 1024, 1}, > }, > .block_erase = erase_block_82802ab, > }, > }, > .write = write_82802ab, > .read = read_memmapped, > .voltage = {4500, 5500}, > }, > > { > @@ -3555,61 +3568,61 @@ > .write = write_82802ab, > .read = read_memmapped, > .voltage = {4500, 5500}, > }, > > { > .vendor = "Intel", > .name = "28F002BC/BL/BV/BX-T", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = INTEL_ID, > .model_id = INTEL_28F002T, > .total_size = 256, > .page_size = 256 * 1024, > .tested = TEST_OK_PRE, > .probe = probe_82802ab, > .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ > .block_erasers = > { > { > .eraseblocks = { > {128 * 1024, 1}, > {96 * 1024, 1}, > {8 * 1024, 2}, > {16 * 1024, 1}, > }, > .block_erase = erase_block_82802ab, > }, > }, > .write = write_82802ab, > .read = read_memmapped, > - .voltage = {4500, 5500}, /* 5.0V +-10% read, 12V fast program & erase- +-5% standard, +-10% option */ > + .voltage = {4500, 5500}, /* 5.0V +-10% read, 12V fast program & erase- +-5% standard, +-10% option- differing read voltages */ please discuss this with me on irc (or mail). you can also just leave this change out for now and we will commit the rest. you have dropped percentage indication in favor of absolute voltages elsewhere. OTOH this line is already way too long... maybe make it a multiline comment above the field, depending on what needs to be added after we have discussed the issues you have discovered. > }, > > { > .vendor = "Intel", > .name = "28F008S3/S5/SC", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = INTEL_ID, > .model_id = INTEL_28F004S3, > .total_size = 512, > .page_size = 256, > .tested = TEST_UNTESTED, > .probe = probe_82802ab, > .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = erase_block_82802ab, > }, > }, > .unlock = unlock_28f004s5, > .write = write_82802ab, > .read = read_memmapped, > }, > > { > .vendor = "Intel", > .name = "28F004B5/BE/BV/BX-B", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = INTEL_ID, > @@ -4025,60 +4038,61 @@ > .vendor = "Macronix", > .name = "MX25L1635E", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = MACRONIX_ID, > .model_id = MACRONIX_MX25L1635E, > .total_size = 2048, > .page_size = 256, > .feature_bits = FEATURE_WRSR_WREN, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 512} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {64 * 1024, 32} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {2 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {2 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_256, > .read = spi_chip_read, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "Macronix", > .name = "MX25L3205", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = MACRONIX_ID, > .model_id = MACRONIX_MX25L3205, > .total_size = 4096, > .page_size = 256, > .feature_bits = FEATURE_WRSR_WREN, > .tested = TEST_OK_PREW, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 1024} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {4 * 1024, 1024} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {4 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {4 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > }, > }, > @@ -4317,60 +4331,61 @@ > }, > .write = write_jedec_1, > .read = read_memmapped, > .voltage = {4500, 5500}, > }, > > { > .vendor = "Macronix", > .name = "MX29F040", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = MACRONIX_ID, > .model_id = MACRONIX_MX29F040, > .total_size = 512, > .page_size = 64 * 1024, > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {4500, 5500}, > }, > > { > .vendor = "Macronix", > .name = "MX29LV040", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = MACRONIX_ID, > .model_id = MACRONIX_MX29LV040, > .total_size = 512, > .page_size = 64 * 1024, > .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 8}, }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > .read = read_memmapped, > .voltage = {2700, 3600}, > }, > > { > @@ -4748,60 +4763,61 @@ > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = PMC_ID, > .model_id = PMC_PM25LV016B, > .total_size = 2048, > .page_size = 256, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 512} }, > .block_erase = spi_block_erase_d7, > }, { > .eraseblocks = { {4 * 1024, 512} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {64 * 1024, 32} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {2 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {2 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_256, > .read = spi_chip_read, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "PMC", > .name = "Pm25LV020", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = PMC_ID, > .model_id = PMC_PM25LV020, > .total_size = 256, > .page_size = 256, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 64} }, > .block_erase = spi_block_erase_d7, > }, { > .eraseblocks = { {64 * 1024, 4} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_256, > .read = spi_chip_read, > .voltage = {2700, 3600}, > @@ -4873,60 +4889,61 @@ > .voltage = {2700, 3600}, > }, > > { > .vendor = "PMC", > .name = "Pm25LV512", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = PMC_ID, > .model_id = PMC_PM25LV512, > .total_size = 64, > .page_size = 256, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 16} }, > .block_erase = spi_block_erase_d7, > }, { > .eraseblocks = { {32 * 1024, 2} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {64 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_256, > .read = spi_chip_read, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "PMC", > .name = "Pm29F002T", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = PMC_ID_NOPREFIX, > .model_id = PMC_PM29F002T, > .total_size = 256, > .page_size = 8 * 1024, > .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, > .tested = TEST_OK_PRE, > .probe = probe_jedec, > .probe_timing = TIMING_FIXME, > .block_erasers = > { > { > .eraseblocks = { > {128 * 1024, 1}, > {96 * 1024, 1}, > {8 * 1024, 2}, > {16 * 1024, 1}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > }, > }, > .write = write_jedec_1, > @@ -5174,60 +5191,61 @@ > .unlock = unlock_82802ab, > .write = write_82802ab, > .read = read_memmapped, > .voltage = {3000, 3600}, > }, > > { > .vendor = "Spansion", > .name = "S25FL004A", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = SPANSION_ID, > .model_id = SPANSION_S25FL004A, > .total_size = 512, > .page_size = 256, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_256, > .read = spi_chip_read, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "Spansion", > .name = "S25FL008A", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = SPANSION_ID, > .model_id = SPANSION_S25FL008A, > .total_size = 1024, > .page_size = 256, > .tested = TEST_OK_PRE, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 16} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_256, > .read = spi_chip_read, > .voltage = {2700, 3600}, > }, > > { > @@ -5254,115 +5272,118 @@ > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_256, > .read = spi_chip_read, > .voltage = {2700, 3600}, > }, > > { > .vendor = "Spansion", > .name = "S25FL032A", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = SPANSION_ID, > .model_id = SPANSION_S25FL032A, > .total_size = 4096, > .page_size = 256, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 64} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {4 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_256, > .read = spi_chip_read, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "Spansion", > .name = "S25FL064A", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = SPANSION_ID, > .model_id = SPANSION_S25FL064A, > .total_size = 8192, > .page_size = 256, > .tested = TEST_OK_PREW, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 128} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {8 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_256, > .read = spi_chip_read, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "SST", > .name = "SST25VF010.REMS", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = SST_ID, > .model_id = SST_SST25VF010_REMS, > .total_size = 128, > .page_size = 256, > .tested = TEST_OK_PREW, > .probe = probe_spi_rems, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 32} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 4} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {128 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_1, > .read = spi_chip_read, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "SST", > .name = "SST25VF016B", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = SST_ID, > .model_id = SST_SST25VF016B, > .total_size = 2048, > .page_size = 256, > .tested = TEST_OK_PREW, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 512} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 64} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {64 * 1024, 32} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {2 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {2 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > @@ -5446,60 +5467,61 @@ > .voltage = {2700, 3600}, > }, > > { > .vendor = "SST", > .name = "SST25VF040.REMS", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = SST_ID, > .model_id = SST_SST25VF040_REMS, > .total_size = 512, > .page_size = 256, > .tested = TEST_OK_PR, > .probe = probe_spi_rems, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 128} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 16} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_1, > .read = spi_chip_read, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "SST", > .name = "SST25VF040B", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = SST_ID, > .model_id = SST_SST25VF040B, > .total_size = 512, > .page_size = 256, > .tested = TEST_UNTESTED, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 128} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 16} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > @@ -5511,95 +5533,97 @@ > .voltage = {2700, 3600}, > }, > > { > .vendor = "SST", > .name = "SST25LF040A.RES", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = SST_ID, > .model_id = SST_SST25VF040_REMS, > .total_size = 512, > .page_size = 256, > .tested = TEST_OK_PROBE, > .probe = probe_spi_res2, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 128} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 16} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_1, > .read = spi_chip_read, > + .voltage = {3000, 3600}, > }, > > { > .vendor = "SST", > .name = "SST25VF040B.REMS", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = SST_ID, > .model_id = SST_SST25VF040B_REMS, > .total_size = 512, > .page_size = 256, > .tested = TEST_OK_PR, > .probe = probe_spi_rems, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 128} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 16} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > }, > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_1, > .read = spi_chip_read, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "SST", > .name = "SST25VF080B", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = SST_ID, > .model_id = SST_SST25VF080B, > .total_size = 1024, > .page_size = 256, > .tested = TEST_OK_PREW, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 256} }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {32 * 1024, 32} }, > .block_erase = spi_block_erase_52, > }, { > .eraseblocks = { {64 * 1024, 16} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > .block_erase = spi_block_erase_60, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > @@ -6753,153 +6777,154 @@ > .read = spi_chip_read, > }, > > { > .vendor = "ST", > .name = "M25PX32", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ST_ID, > .model_id = ST_M25PX32, > .total_size = 4096, > .page_size = 256, > .tested = TEST_OK_PRE, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { { 4 * 1024, 1024 } }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {64 * 1024, 64} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {4 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_256, > .read = spi_chip_read, > + .voltage = {2700, 3600}, > }, > > { > .vendor = "ST", > .name = "M25PX64", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ST_ID, > .model_id = ST_M25PX64, > .total_size = 8192, > .page_size = 256, > .tested = TEST_OK_PRE, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .block_erasers = > { > { > .eraseblocks = { { 4 * 1024, 2048 } }, > .block_erase = spi_block_erase_20, > }, { > .eraseblocks = { {64 * 1024, 128} }, > .block_erase = spi_block_erase_d8, > }, { > .eraseblocks = { {8 * 1024 * 1024, 1} }, > .block_erase = spi_block_erase_c7, > } > }, > .unlock = spi_disable_blockprotect, > .write = spi_chip_write_256, > .read = spi_chip_read, > }, > > { > .vendor = "ST", > .name = "M29F002B", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = ST_ID, > .model_id = ST_M29F002B, > .total_size = 256, > .page_size = 64 * 1024, > .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ > .block_erasers = > { > { > .eraseblocks = { > {16 * 1024, 1}, > {8 * 1024, 2}, > {32 * 1024, 1}, > {64 * 1024, 3}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > } > }, > .write = write_jedec_1, > .read = read_memmapped, > - .voltage = {4750, 5250}, /* Datasheet says some are only 4.75-5.25 V */ > + .voltage = {4750, 5250}, /* -X model is 4.75-5.25V, others 4.5-5.5V */ "model" instead of "speed"/nothing above, please use: .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ > }, > > { > .vendor = "ST", > .name = "M29F002T/NT", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = ST_ID, > .model_id = ST_M29F002T, > .total_size = 256, > .page_size = 64 * 1024, > .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ > .block_erasers = > { > { > .eraseblocks = { > {64 * 1024, 3}, > {32 * 1024, 1}, > {8 * 1024, 2}, > {16 * 1024, 1}, > }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {256 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > } > }, > .write = write_jedec_1, > .read = read_memmapped, > - .voltage = {4750, 5250}, /* Datasheet says some are only 4.75-5.25 V */ > + .voltage = {4750, 5250}, /* -X model is 4.75-5.25V, others 4.5-5.5V */ see above > }, > > { > .vendor = "ST", > .name = "M29F040B", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = ST_ID, > .model_id = ST_M29F040B, > .total_size = 512, > .page_size = 64 * 1024, > .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = TIMING_ZERO, /* datasheet specifies no timing */ > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 8}, }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > } > }, > .write = write_jedec_1, > .read = read_memmapped, > .voltage = {4500, 5500}, > }, > > { > @@ -8104,60 +8129,61 @@ > }, > > { > .vendor = "Winbond", > .name = "W39L040", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = WINBOND_ID, > .model_id = WINBOND_W39L040, > .total_size = 512, > .page_size = 64 * 1024, > .feature_bits = FEATURE_EITHER_RESET, > .tested = TEST_OK_PR, > .probe = probe_jedec, > .probe_timing = 10, > .block_erasers = > { > { > .eraseblocks = { {4 * 1024, 128} }, > .block_erase = erase_block_jedec, > }, { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > } > }, > .printlock = printlock_w39l040, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {3000, 3600}, > }, > > { > .vendor = "Winbond", > .name = "W39V040A", > .bustype = CHIP_BUSTYPE_LPC, > .manufacture_id = WINBOND_ID, > .model_id = WINBOND_W39V040A, > .total_size = 512, > .page_size = 64 * 1024, > .feature_bits = FEATURE_EITHER_RESET, > .tested = TEST_OK_PR, > .probe = probe_jedec, > .probe_timing = 10, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > } > }, > .printlock = printlock_w39v040a, > .write = write_jedec_1, > .read = read_memmapped, > .voltage = {3000, 3600}, > }, > > @@ -8248,87 +8274,89 @@ > .read = read_memmapped, > .voltage = {3000, 3600}, > }, > > { > .vendor = "Winbond", > .name = "W39V040FB", > .bustype = CHIP_BUSTYPE_FWH, > .manufacture_id = WINBOND_ID, > .model_id = WINBOND_W39V040B, > .total_size = 512, > .page_size = 64 * 1024, > .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, > .tested = TEST_OK_PREW, > .probe = probe_jedec, > .probe_timing = 10, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > } > }, > .printlock = printlock_w39v040fb, > .unlock = unlock_w39v040fb, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {3000, 3600}, /* Also has 12V fast program */ > }, > > { > .vendor = "Winbond", > .name = "W39V040FC", > .bustype = CHIP_BUSTYPE_FWH, > .manufacture_id = WINBOND_ID, > .model_id = WINBOND_W39V040C, > .total_size = 512, > .page_size = 64 * 1024, > .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = 10, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 8} }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > } > }, > .printlock = printlock_w39v040fc, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {3000, 3600}, /* Also has 12V fast program */ > }, > > { > .vendor = "Winbond", > .name = "W39V080A", > .bustype = CHIP_BUSTYPE_LPC, > .manufacture_id = WINBOND_ID, > .model_id = WINBOND_W39V080A, > .total_size = 1024, > .page_size = 64 * 1024, > .feature_bits = FEATURE_EITHER_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = 10, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 16} }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > } > }, > .printlock = printlock_w39v080a, > .write = write_jedec_1, > .read = read_memmapped, > .voltage = {3000, 3600}, > }, > > @@ -8451,88 +8479,89 @@ > .read = read_memmapped, > .voltage = {3000, 3600}, > }, > > { > .vendor = "Winbond", > .name = "W39V080FA", > .bustype = CHIP_BUSTYPE_FWH, > .manufacture_id = WINBOND_ID, > .model_id = WINBOND_W39V080FA, > .total_size = 1024, > .page_size = 64 * 1024, > .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, > .tested = TEST_OK_PRE, > .probe = probe_jedec, > .probe_timing = 10, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 16}, }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {1024 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > } > }, > .printlock = printlock_w39v080fa, > .unlock = unlock_w39v080fa, > .write = write_jedec_1, > .read = read_memmapped, > - .voltage = {3000, 3600}, /* 12 V fast program mode */ > + .voltage = {3000, 3600}, /* Also has 12V fast program*/ missing space at the end > }, > > { > .vendor = "Winbond", > .name = "W39V080FA (dual mode)", > .bustype = CHIP_BUSTYPE_FWH, > .manufacture_id = WINBOND_ID, > .model_id = WINBOND_W39V080FA_DM, > .total_size = 512, > .page_size = 64 * 1024, > .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, > .tested = TEST_UNTESTED, > .probe = probe_jedec, > .probe_timing = 10, > .block_erasers = > { > { > .eraseblocks = { {64 * 1024, 8}, }, > .block_erase = erase_sector_jedec, > }, { > .eraseblocks = { {512 * 1024, 1} }, > .block_erase = erase_chip_block_jedec, > } > }, > .printlock = printlock_w39v080fa_dual, > .write = write_jedec_1, > .read = read_memmapped, > + .voltage = {3000, 3600}, /* Also has 12V fast program */ > }, > > { > .vendor = "AMIC", > .name = "unknown AMIC SPI chip", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = AMIC_ID, > .model_id = GENERIC_DEVICE_ID, > .total_size = 0, > .page_size = 256, > .tested = TEST_BAD_PREW, > .probe = probe_spi_rdid4, > .probe_timing = TIMING_ZERO, > .write = NULL, > .read = NULL, > }, > > { > .vendor = "Atmel", > .name = "unknown Atmel SPI chip", > .bustype = CHIP_BUSTYPE_SPI, > .manufacture_id = ATMEL_ID, > .model_id = GENERIC_DEVICE_ID, > .total_size = 0, > .page_size = 256, > .tested = TEST_BAD_PREW, > .probe = probe_spi_rdid, > .probe_timing = TIMING_ZERO, > .write = NULL, > .read = NULL, i think the next iteration will be committable. i have not looked how many chips are still missing voltage fields, but one could use my voltage printing patches to see that easily... (by using flashrom -V -L) http://patchwork.coreboot.org/patch/3215/ http://patchwork.coreboot.org/patch/3216/ dunno if they still apply cleanly, but shouldnt be hard to rebase. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

Report: Winbond W39V080FA -- success, mostly
by Michael Sternberg 17 Jul '11

17 Jul '11

Hello, I'd like to report a couple of mixed cases for several nodes having a "Winbond W39V080FA" chip. First, I was using flashrom-v0.9.1. I had success with about 6 nodes, then the flash failed on the next two. The ERASE step succeeded, but the Programming step hung at address 0c0000. So far, I could recover one of the chips in another node (PLCC32 socket). I booted normally, then hot-swapped in the failed chip and was quite happy when a read succeeded using a newly installed flashrom v0.9.3-r1299 (from Fedora EPEL). Re-flash then succeeded for this chip as well. I could not find a significant difference between the nodes that succeeded and those that did not. They started with the same BIOS, but the CMOS may have differed. I then continued with flashrom v0.9.3-r1299 for more nodes and did not have a failure so far (ran on 8 nodes). I realize that the thin statistics alone do not support declaring full success, but hope that the evidently changed write regime (erase/write is now interleaved) has done the trick. Thank you! Michael ===================================================================================== 0.9.1 SUCCESS LOG ... Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xda, id2 0xd3 Found chip "Winbond W39V080FA" (1024 KB, FWH) at physical address 0xfff00000. Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xda, id2 0xd3 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Lockout bits: No hardware bootblock locking (good!) No hardware block locking (good!) Trying to unlock block @0x00000000 = 0x00 Full Access. Trying to unlock block @0x00010000 = 0x00 Full Access. Trying to unlock block @0x00020000 = 0x00 Full Access. Trying to unlock block @0x00030000 = 0x00 Full Access. Trying to unlock block @0x00040000 = 0x00 Full Access. Trying to unlock block @0x00050000 = 0x00 Full Access. Trying to unlock block @0x00060000 = 0x00 Full Access. Trying to unlock block @0x00070000 = 0x00 Full Access. Trying to unlock block @0x00080000 = 0x00 Full Access. Trying to unlock block @0x00090000 = 0x00 Full Access. Trying to unlock block @0x000a0000 = 0x00 Full Access. Trying to unlock block @0x000b0000 = 0x00 Full Access. Trying to unlock block @0x000c0000 = 0x00 Full Access. Trying to unlock block @0x000d0000 = 0x00 Full Access. Trying to unlock block @0x000e0000 = 0x00 Full Access. Trying to unlock block @0x000f0000 = 0x00 Full Access. Erasing: Programming: COMPLETE. Verifying flash... VERIFIED. ===================================================================================== 0.9.1 FAIL LOG (same as above, except hangs at the Programming step at 0c0000) ===================================================================================== 0.9.3 SUCCESS LOG flashrom v0.9.3-r1299 on Linux 2.6.18-164.11.1.el5 (x86_64), built with libpci 3.1.7, GCC 4.1.2 20080704 (Red Hat 4.1.2-50), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2664M loops per second, 10 myus = 10 us, 100 myus = 101 us, 1000 myus = 1000 us, 10000 myus = 10001 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Supermicro" DMI string system-product-name: "X7DBT" DMI string system-version: "0123456789" DMI string baseboard-manufacturer: "Supermicro" DMI string baseboard-product-name: "X7DBT" DMI string baseboard-version: "PCB Version" DMI string chassis-type: "Other" Found chipset "Intel 631xESB/632xESB/3100", enabling flash write... chipset PCI ID is 8086:2670, 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK. This chipset supports the following protocols: FWH. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. ... Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xda, id2 0xd3 Probing for Winbond W39V080FA, 1024 KB: probe_jedec_common: id1 0xda, id2 0xd3 Found chip "Winbond W39V080FA" (1024 KB, FWH) at physical address 0xfff00000. Lockout bits: Hardware bootblock locking (#TBL) is not active. Hardware remaining chip locking (#WP) is not active.. Lock status of block at 0x00000000 is Write Lock (Default State). Lock status of block at 0x00010000 is Write Lock (Default State). Lock status of block at 0x00020000 is Write Lock (Default State). Lock status of block at 0x00030000 is Write Lock (Default State). Lock status of block at 0x00040000 is Write Lock (Default State). Lock status of block at 0x00050000 is Write Lock (Default State). Lock status of block at 0x00060000 is Write Lock (Default State). Lock status of block at 0x00070000 is Write Lock (Default State). Lock status of block at 0x00080000 is Write Lock (Default State). Lock status of block at 0x00090000 is Write Lock (Default State). Lock status of block at 0x000a0000 is Write Lock (Default State). Lock status of block at 0x000b0000 is Write Lock (Default State). Lock status of block at 0x000c0000 is Write Lock (Default State). Lock status of block at 0x000d0000 is Write Lock (Default State). Lock status of block at 0x000e0000 is Write Lock (Default State). Lock status of block at 0x000f0000 is Write Lock (Default State). Probing for Winbond W39V080FA (dual mode), 512 KB: probe_jedec_common: id1 0xda, id2 0xd3 Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped.Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Unlocking block at 0x0 Unlocking block at 0x10000 Unlocking block at 0x20000 Unlocking block at 0x30000 Unlocking block at 0x40000 Unlocking block at 0x50000 Unlocking block at 0x60000 Unlocking block at 0x70000 Unlocking block at 0x80000 Unlocking block at 0x90000 Unlocking block at 0xa0000 Unlocking block at 0xb0000 Unlocking block at 0xc0000 Unlocking block at 0xd0000 Unlocking block at 0xe0000 Unlocking block at 0xf0000 Lockout bits: Hardware bootblock locking (#TBL) is not active. Hardware remaining chip locking (#WP) is not active.. Flash image seems to be a legacy BIOS. Disabling checks. Reading old flash chip contents... Erasing and writing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x00ffff:EW, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:W, 0x050000-0x05ffff:EW, 0x060000-0x06ffff:EW, 0x070000-0x07ffff:EW, 0x080000-0x08ffff:EW, 0x090000-0x09ffff:EW, 0x0a0000-0x0aff ff:EW, 0x0b0000-0x0bffff:EW, 0x0c0000-0x0cffff:EW, 0x0d0000-0x0dffff:EW, 0x0e0000-0x0effff:EW, 0x0f0000-0x0fffff:EW Done. Verifying flash... VERIFIED. =====================================================================================

2 3

REPORT: Writing support OK (SST SST39SF020A)
by Hosco Tecnologia 17 Jul '11

17 Jul '11

BIOS WRITE SUPPORT STATUS: OK *Vendor: Award Software, Inc. Version: ASUS P4S533-X ACPI BIOS Revision 1005 Beta 004 (11/11/2003)* Checking the CHIP: root@PartedMagic:/media/sdb1# flashrom flashrom v0.9.3-r1323 on Linux 2.6.38.8-pmagic (i686), built with libpci 3.1.7, GCC 4.6.1 20110526 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "SiS 645DX", enabling flash write... OK. This chipset supports the following protocols: Non-SP. *Found chip "SST SST39SF020A" (256 kB, Parallel)* at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! No operations were specified. *FLASHING the CHIP:* root@PartedMagic:/media/sdb1# flashrom -Vw 1005x.004 flashrom v0.9.3-r1323 on Linux 2.6.38.8-pmagic (i686), built with libpci 3.1.7, GCC 4.6.1 20110526 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1576M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1080 us, 10000 myus = 9950 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System Manufacturer" DMI string system-product-name: "System Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P4S533-X" DMI string baseboard-version: "REV 1.xx" DMI string chassis-type: "Tower" Found ITE Super I/O, ID 0x8705 on port 0x2e Found ITE Super I/O, ID 0x8705 on port 0x4e Found chipset "SiS 645DX", enabling flash write... chipset PCI ID is 1039:0646, Found southbridge 1039:0962 at 00:02:0 OK. This chipset supports the following protocols: Non-SP. Enabling IT8705F flash ROM interface write. Maximum IT8705F parallel flash decode size is 262144. Enabling IT8705F flash ROM interface write. Maximum IT8705F parallel flash decode size is 262144. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0xb4, id2 0x67, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: Chip size 2048 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: Chip size 1024 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0xb4, id2 0x67, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0xb4, id2 0x67, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: Chip size 1024 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: Chip size 1024 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: Chip size 1024 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L05PT, 64 kB: skipped. Probing for AMIC A25L05PU, 64 kB: skipped. Probing for AMIC A25L10PT, 128 kB: skipped. Probing for AMIC A25L10PU, 128 kB: skipped. Probing for AMIC A25L20PT, 256 kB: skipped. Probing for AMIC A25L20PU, 256 kB: skipped. Probing for AMIC A25L40PT, 512 kB: skipped. Probing for AMIC A25L40PU, 512 kB: skipped. Probing for AMIC A25L80P, 1024 kB: skipped. Probing for AMIC A25L16PT, 2048 kB: skipped. Probing for AMIC A25L16PU, 2048 kB: skipped. Probing for AMIC A25L512, 64 kB: skipped. Probing for AMIC A25L010, 128 kB: skipped. Probing for AMIC A25L020, 256 kB: skipped. Probing for AMIC A25L040, 512 kB: skipped. Probing for AMIC A25L080, 1024 kB: skipped. Probing for AMIC A25L016, 2048 kB: skipped. Probing for AMIC A25L032, 4096 kB: skipped. Probing for AMIC A25LQ032, 4096 kB: skipped. Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: skipped. Probing for Atmel AT25DF021, 256 kB: skipped. Probing for Atmel AT25DF041A, 512 kB: skipped. Probing for Atmel AT25DF081, 1024 kB: skipped. Probing for Atmel AT25DF081A, 1024 kB: skipped. Probing for Atmel AT25DF161, 2048 kB: skipped. Probing for Atmel AT25DF321, 4096 kB: skipped. Probing for Atmel AT25DF321A, 4096 kB: skipped. Probing for Atmel AT25DF641, 8192 kB: skipped. Probing for Atmel AT25DQ161, 2048 kB: skipped. Probing for Atmel AT25F512B, 64 kB: skipped. Probing for Atmel AT25FS010, 128 kB: skipped. Probing for Atmel AT25FS040, 512 kB: skipped. Probing for Atmel AT26DF041, 512 kB: skipped. Probing for Atmel AT26DF081A, 1024 kB: skipped. Probing for Atmel AT26DF161, 2048 kB: skipped. Probing for Atmel AT26DF161A, 2048 kB: skipped. Probing for Atmel AT26F004, 512 kB: skipped. Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT29C040A, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT45CS1282, 16896 kB: skipped. Probing for Atmel AT45DB011D, 128 kB: skipped. Probing for Atmel AT45DB021D, 256 kB: skipped. Probing for Atmel AT45DB041D, 512 kB: skipped. Probing for Atmel AT45DB081D, 1024 kB: skipped. Probing for Atmel AT45DB161D, 2048 kB: skipped. Probing for Atmel AT45DB321C, 4224 kB: skipped. Probing for Atmel AT45DB321D, 4096 kB: skipped. Probing for Atmel AT45DB642D, 8192 kB: skipped. Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Bright BM29F040, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xb6 Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for EMST F25L008A, 1024 kB: skipped. Probing for Eon EN25B05, 64 kB: skipped. Probing for Eon EN25B05T, 64 kB: skipped. Probing for Eon EN25B10, 128 kB: skipped. Probing for Eon EN25B10T, 128 kB: skipped. Probing for Eon EN25B20, 256 kB: skipped. Probing for Eon EN25B20T, 256 kB: skipped. Probing for Eon EN25B40, 512 kB: skipped. Probing for Eon EN25B40T, 512 kB: skipped. Probing for Eon EN25B80, 1024 kB: skipped. Probing for Eon EN25B80T, 1024 kB: skipped. Probing for Eon EN25B16, 2048 kB: skipped. Probing for Eon EN25B16T, 2048 kB: skipped. Probing for Eon EN25B32, 4096 kB: skipped. Probing for Eon EN25B32T, 4096 kB: skipped. Probing for Eon EN25B64, 8192 kB: skipped. Probing for Eon EN25B64T, 8192 kB: skipped. Probing for Eon EN25D16, 2048 kB: skipped. Probing for Eon EN25F05, 64 kB: skipped. Probing for Eon EN25F10, 128 kB: skipped. Probing for Eon EN25F20, 256 kB: skipped. Probing for Eon EN25F40, 512 kB: skipped. Probing for Eon EN25F80, 1024 kB: skipped. Probing for Eon EN25F16, 2048 kB: skipped. Probing for Eon EN25F32, 4096 kB: skipped. Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0xb4, id2 0x67, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x23, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x23, id2 0x2d Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Hyundai HY29F040A, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x23, id2 0x2d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x23, id2 0x2d, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: skipped. Probing for Intel 82802AC, 1024 kB: skipped. Probing for Macronix MX25L512, 64 kB: skipped. Probing for Macronix MX25L1005, 128 kB: skipped. Probing for Macronix MX25L2005, 256 kB: skipped. Probing for Macronix MX25L4005, 512 kB: skipped. Probing for Macronix MX25L8005, 1024 kB: skipped. Probing for Macronix MX25L1605, 2048 kB: skipped. Probing for Macronix MX25L1635D, 2048 kB: skipped. Probing for Macronix MX25L1635E, 2048 kB: skipped. Probing for Macronix MX25L3205, 4096 kB: skipped. Probing for Macronix MX25L3235D, 4096 kB: skipped. Probing for Macronix MX25L6405, 8192 kB: skipped. Probing for Macronix MX25L12805, 16384 kB: skipped. Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0xb4, id2 0x67, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0xb4, id2 0x67, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for MoselVitelic V29C51400B, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xb6 Probing for MoselVitelic V29C51400T, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xb6 Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Numonyx M25PE10, 128 kB: skipped. Probing for Numonyx M25PE20, 256 kB: skipped. Probing for Numonyx M25PE40, 512 kB: skipped. Probing for Numonyx M25PE80, 1024 kB: skipped. Probing for Numonyx M25PE16, 2048 kB: skipped. Probing for PMC Pm25LV010, 128 kB: skipped. Probing for PMC Pm25LV016B, 2048 kB: skipped. Probing for PMC Pm25LV020, 256 kB: skipped. Probing for PMC Pm25LV040, 512 kB: skipped. Probing for PMC Pm25LV080B, 1024 kB: skipped. Probing for PMC Pm25LV512, 64 kB: skipped. Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0xb4, id2 0x67, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: skipped. Probing for PMC Pm49FL004, 512 kB: skipped. Probing for Sanyo LF25FW203A, 2048 kB: skipped. Probing for Sharp LHF00L04, 1024 kB: skipped. Probing for Spansion S25FL004A, 512 kB: skipped. Probing for Spansion S25FL008A, 1024 kB: skipped. Probing for Spansion S25FL016A, 2048 kB: skipped. Probing for Spansion S25FL032A, 4096 kB: skipped. Probing for Spansion S25FL064A, 8192 kB: skipped. Probing for SST SST25VF010.REMS, 128 kB: skipped. Probing for SST SST25VF016B, 2048 kB: skipped. Probing for SST SST25VF032B, 4096 kB: skipped. Probing for SST SST25VF064C, 8192 kB: skipped. Probing for SST SST25VF040.REMS, 512 kB: skipped. Probing for SST SST25VF040B, 512 kB: skipped. Probing for SST SST25LF040A.RES, 512 kB: skipped. Probing for SST SST25VF040B.REMS, 512 kB: skipped. Probing for SST SST25VF080B, 1024 kB: skipped. Probing for SST SST28SF040A, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_82802ab: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Found chip "SST SST39SF020A" (256 kB, Parallel) at physical address 0xfffc0000. Probing for SST SST39SF040, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39VF040, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39VF080, 1024 kB: Chip size 1024 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: skipped. Probing for SST SST49LF003A/B, 384 kB: skipped. Probing for SST SST49LF004A/B, 512 kB: skipped. Probing for SST SST49LF004C, 512 kB: skipped. Probing for SST SST49LF008A, 1024 kB: skipped. Probing for SST SST49LF008C, 1024 kB: skipped. Probing for SST SST49LF016C, 2048 kB: skipped. Probing for SST SST49LF020, 256 kB: skipped. Probing for SST SST49LF020A, 256 kB: skipped. Probing for SST SST49LF040, 512 kB: skipped. Probing for SST SST49LF040B, 512 kB: skipped. Probing for SST SST49LF080A, 1024 kB: skipped. Probing for SST SST49LF160C, 2048 kB: skipped. Probing for ST M25P05-A, 64 kB: skipped. Probing for ST M25P05.RES, 64 kB: skipped. Probing for ST M25P10-A, 128 kB: skipped. Probing for ST M25P10.RES, 128 kB: skipped. Probing for ST M25P20, 256 kB: skipped. Probing for ST M25P40, 512 kB: skipped. Probing for ST M25P40-old, 512 kB: skipped. Probing for ST M25P80, 1024 kB: skipped. Probing for ST M25P16, 2048 kB: skipped. Probing for ST M25P32, 4096 kB: skipped. Probing for ST M25P64, 8192 kB: skipped. Probing for ST M25P128, 16384 kB: skipped. Probing for ST M25PX16, 2048 kB: skipped. Probing for ST M25PX32, 4096 kB: skipped. Probing for ST M25PX64, 8192 kB: skipped. Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x23, id2 0x2d Probing for ST M29F400BT, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_m29f400bt: id1 0x23, id2 0x2d Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0xb4, id2 0x67, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: skipped. Probing for ST M50FLW040B, 512 kB: skipped. Probing for ST M50FLW080A, 1024 kB: skipped. Probing for ST M50FLW080B, 1024 kB: skipped. Probing for ST M50FW002, 256 kB: skipped. Probing for ST M50FW016, 2048 kB: skipped. Probing for ST M50FW040, 512 kB: skipped. Probing for ST M50FW080, 1024 kB: skipped. Probing for ST M50LPW116, 2048 kB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xb6 Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x23, id2 0x20, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: skipped. Probing for Winbond W25Q16, 2048 kB: skipped. Probing for Winbond W25Q32, 4096 kB: skipped. Probing for Winbond W25Q64, 8192 kB: skipped. Probing for Winbond W25Q128, 16384 kB: skipped. Probing for Winbond W25x10, 128 kB: skipped. Probing for Winbond W25x20, 256 kB: skipped. Probing for Winbond W25x40, 512 kB: skipped. Probing for Winbond W25x80, 1024 kB: skipped. Probing for Winbond W25x16, 2048 kB: skipped. Probing for Winbond W25x32, 4096 kB: skipped. Probing for Winbond W25x64, 8192 kB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Winbond W29C040/P, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39L040, 512 kB: Chip size 512 kB is bigger than supported size 256 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Winbond W39V040A, 512 kB: skipped. Probing for Winbond W39V040B, 512 kB: skipped. Probing for Winbond W39V040C, 512 kB: skipped. Probing for Winbond W39V040FA, 512 kB: skipped. Probing for Winbond W39V040FB, 512 kB: skipped. Probing for Winbond W39V040FC, 512 kB: skipped. Probing for Winbond W39V080A, 1024 kB: skipped. Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Winbond W49V002A, 256 kB: skipped. Probing for Winbond W49V002FA, 256 kB: skipped. Probing for Winbond W39V080FA, 1024 kB: skipped. Probing for Winbond W39V080FA (dual mode), 512 kB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 kB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 kB: skipped. Probing for Eon unknown Eon SPI chip, 0 kB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 kB: skipped. Probing for PMC unknown PMC SPI chip, 0 kB: skipped. Probing for SST unknown SST SPI chip, 0 kB: skipped. Probing for ST unknown ST SPI chip, 0 kB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 kB: skipped. Probing for Generic unknown SPI chip (RDID), 0 kB: skipped. Probing for Generic unknown SPI chip (REMS), 0 kB: skipped. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... Erasing and writing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:E, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S *Done. Verifying flash... VERIFIED. * Restoring PCI config space for 00:02:0 reg 0x45 Restoring PCI config space for 00:02:0 reg 0x40 root@PartedMagic:/media/sdb1# Hope being helpful Regards -- William (diretor de projetos) Fone fixo: (11)2263.1384 Fone móvel: (11)8504.0611 Web Site: http://hoscotecnologia.com.br <http://hoscotecnologia.com.br/> E-mail: comercial(a)hoscotecnologia.com.br <mailto:comercial@hoscotecnologia.com.br><mailto:mailto:comercial@hoscotecnologia.com.br>

3 2

Re: [flashrom] [PATCH 1/4] ichspi.c: refactor filling and reading the fdata/spid registers
by Carl-Daniel Hailfinger 16 Jul '11

16 Jul '11

Hi, is there any reason why this is not committed yet? Regards, Carl-Daniel Am 16.07.2011 04:17 schrieb Stefan Tauner: > - add ich_fill_data to fill the chipset registers from an array > - add ich_read_data to copy the data from the chipset register into an array > - replace the existing code with calls to those functions > - minor cosmetic changes > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> > -- http://www.hailfinger.org/

2 2

← Newer
1
...
16
17
18
19
20
21
22
...
28
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom July 2011