flashrom April 2011

flashrom@flashrom.org

61 participants
201 discussions

Voltage & form-factor spreadsheet
by Steven Zakulec 04 Jun '11

04 Jun '11

Hello, some weeks ago I asked carldani what I could do to help the flashrom project, and he mentioned that they could really use someone to go thru all the chips in flashchips.c and get the voltage range and form factor(s) for each chip listed there. This is the result of that project: a spreadsheet with the chip name, voltage range, form factors, connector type (pins, leads, etc). This covers all the chips as of v1143. If anyone else is interested, I also have a short text file with all of the form factor acronyms I came across and what they mean (I grabbed the definition from the datasheet). There's a few missing chips, and some values that I wasn't quite sure about. Comments would be greatly appreciated.

4 19

Winbond W25Q128 - in Intel ICH10
by Rheneus 22 May '11

22 May '11

Hi, I could not use flashrom 0.9.3 -r1205 to detect Winbond W25Q128 to program BIOS. Attached the read log Just by adding WINBOND_NEX_W25Q128 0x4018 in flashchips.c for W25Q128, similar to W25Q64 throws run Opcode 0x3 error for read. Could you please give some suggestions. -Antony # ./flashrom -Vr ./read.bios flashrom v0.9.3-r1205 on NetBSD 5.1_STABLE (i386), built with libpci 3.1.3, GCC 4.1.3 20080704 prerelease (NetBSD nb2 20081120), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 153M loops per second, 10 myus = 10 us, 100 myus = 102 us, 1000 myus = 1026 us, 10000 myus = 10213 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. sh: dmidecode: not found dmidecode execution unsucessfull - continuing without DMI info Found chipset "Intel 3420", enabling flash write... chipset PCI ID is 8086:3b14, 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x8 Root Complex Register Block address = 0xfed1c000 GCS = 0xc40: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-write 0x58: 0x07ff0400 (FREG1: BIOS) 0x00400000-0x007fffff is read-write 0x5C: 0x03ff0003 (FREG2: Management Engine) 0x00003000-0x003fffff is read-write 0x60: 0x00020001 (FREG3: Gigabit Ethernet) 0x00001000-0x00002fff is read-write 0x64: 0x00000fff (FREG4: Platform Data) 0x00fff000-0x00000fff is read-write 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0xf8414004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x462b (OPTYPE) 0x98: 0x05ab0302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00001000 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching enabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BN/BX-B, 128 KB: skipped. Probing for Intel 28F001BN/BX-T, 128 KB: skipped. Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: skipped. Probing for Intel 28F008S3/S5/SC, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Spansion S25FL032A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Spansion S25FL064A, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST SST25VF010.REMS, 128 KB: probe_spi_rems: id1 0xef, id2 0x17 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x17 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST SST25LF040A.RES, 512 KB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x17, id2 0x17 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x17 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x4e, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 KB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 KB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Found chip "Generic unknown SPI chip (RDID)" (0 KB, SPI) at physical address 0x0. Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xef, id2 0x17 === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Read is not working on this chip. Aborting. Restoring PCI config space for 00:1f:0 reg 0xdc

3 7

[PATCH] Lock printing for AMIC A25* and Atmel AT25*
by Carl-Daniel Hailfinger 19 May '11

19 May '11

Add lock printing for AMIC A25L05PT, A25L05PU, A25L10PT, A25L10PU, A25L20PT, A25L20PU, A25L40PT, A25L40PU, A25L80P, A25L16PT, A25L16PU, A25L512, A25L010, A25L020, A25L040, A25L080, A25L016, A25L032, A25LQ032. Add lock printing for Atmel AT26DF081A, AT26DF161, AT26DF161A, AT26DF321. Move Atmel AT25*/AT26* lock related functions from spi25.c to at25.c. That code was originally committed in r1115, but chip specific functions shouldn't live in the generic spi25.c. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-spi_prettyprint_statusreg_a25_at25/a25.c =================================================================== --- flashrom-spi_prettyprint_statusreg_a25_at25/a25.c (Revision 0) +++ flashrom-spi_prettyprint_statusreg_a25_at25/a25.c (Revision 0) @@ -0,0 +1,103 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2010 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "flash.h" +#include "chipdrivers.h" +#include "spi.h" + +/* Prettyprint the status register. Works for AMIC A25L series. */ + +int spi_prettyprint_status_register_amic_a25l05p(struct flashchip *flash) +{ + uint8_t status; + + status = spi_read_status_register(); + msg_cdbg("Chip status register is %02x\n", status); + + msg_cdbg("Chip status register: Status Register Write Disable " + "(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not "); + spi_prettyprint_status_register_bit(status, 6); + spi_prettyprint_status_register_bit(status, 5); + spi_prettyprint_status_register_bit(status, 4); + spi_prettyprint_status_register_bp3210(status, 1); + spi_prettyprint_status_register_welwip(status); + return 0; +} + +int spi_prettyprint_status_register_amic_a25l40p(struct flashchip *flash) +{ + uint8_t status; + + status = spi_read_status_register(); + msg_cdbg("Chip status register is %02x\n", status); + + msg_cdbg("Chip status register: Status Register Write Disable " + "(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not "); + spi_prettyprint_status_register_bit(status, 6); + spi_prettyprint_status_register_bit(status, 5); + spi_prettyprint_status_register_bp3210(status, 2); + spi_prettyprint_status_register_welwip(status); + return 0; +} + +int spi_prettyprint_status_register_amic_a25l032(struct flashchip *flash) +{ + uint8_t status; + + status = spi_read_status_register(); + msg_cdbg("Chip status register is %02x\n", status); + + msg_cdbg("Chip status register: Status Register Write Disable " + "(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not "); + msg_cdbg("Chip status register: Sector Protect Size (SEC) " + "is %i KB\n", (status & (1 << 6)) ? 4 : 64); + msg_cdbg("Chip status register: Top/Bottom (TB) " + "is %s\n", (status & (1 << 5)) ? "bottom" : "top"); + spi_prettyprint_status_register_bp3210(status, 2); + spi_prettyprint_status_register_welwip(status); + msg_cdbg("Chip status register 2 is NOT decoded!\n"); + return 0; +} + +int spi_prettyprint_status_register_amic_a25lq032(struct flashchip *flash) +{ + uint8_t status; + + status = spi_read_status_register(); + msg_cdbg("Chip status register is %02x\n", status); + + msg_cdbg("Chip status register: Status Register Write Disable " + "(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not "); + msg_cdbg("Chip status register: Sector Protect Size (SEC) " + "is %i KB\n", (status & (1 << 6)) ? 4 : 64); + msg_cdbg("Chip status register: Top/Bottom (TB) " + "is %s\n", (status & (1 << 5)) ? "bottom" : "top"); + spi_prettyprint_status_register_bp3210(status, 2); + spi_prettyprint_status_register_welwip(status); + msg_cdbg("Chip status register 2 is NOT decoded!\n"); + return 0; +} + +/* FIXME: spi_disable_blockprotect is incorrect but works fine for chips using + * spi_prettyprint_status_register_amic_a25l05p or + * spi_prettyprint_status_register_amic_a25l40p. + * FIXME: spi_disable_blockprotect is incorrect and will fail randomly for chips + * using spi_prettyprint_status_register_amic_a25l032 or + * spi_prettyprint_status_register_amic_a25lq032. + */ Index: flashrom-spi_prettyprint_statusreg_a25_at25/Makefile =================================================================== --- flashrom-spi_prettyprint_statusreg_a25_at25/Makefile (Revision 1245) +++ flashrom-spi_prettyprint_statusreg_a25_at25/Makefile (Arbeitskopie) @@ -84,7 +84,8 @@ CHIP_OBJS = jedec.o stm50flw0x0x.o w39.o w29ee011.o \ sst28sf040.o m29f400bt.o 82802ab.o pm49fl00x.o \ - sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o sharplhf00l04.o + sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o sharplhf00l04.o \ + a25.o at25.o LIB_OBJS = layout.o Index: flashrom-spi_prettyprint_statusreg_a25_at25/at25.c =================================================================== --- flashrom-spi_prettyprint_statusreg_a25_at25/at25.c (Revision 0) +++ flashrom-spi_prettyprint_statusreg_a25_at25/at25.c (Revision 0) @@ -0,0 +1,287 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2010 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "flash.h" +#include "chipdrivers.h" +#include "spi.h" + +/* Prettyprint the status register. Works for Atmel A25/A26 series. */ + +static void spi_prettyprint_status_register_atmel_at25_srpl(uint8_t status) +{ + msg_cdbg("Chip status register: Sector Protection Register Lock (SRPL) " + "is %sset\n", (status & (1 << 7)) ? "" : "not "); +} + +static void spi_prettyprint_status_register_atmel_at25_epewpp(uint8_t status) +{ + msg_cdbg("Chip status register: Erase/Program Error (EPE) " + "is %sset\n", (status & (1 << 5)) ? "" : "not "); + msg_cdbg("Chip status register: WP# pin (WPP) " + "is %sasserted\n", (status & (1 << 4)) ? "not " : ""); +} + +static void spi_prettyprint_status_register_atmel_at25_swp(uint8_t status) +{ + msg_cdbg("Chip status register: Software Protection Status (SWP): "); + switch (status & (3 << 2)) { + case 0x0 << 2: + msg_cdbg("no sectors are protected\n"); + break; + case 0x1 << 2: + msg_cdbg("some sectors are protected\n"); + /* FIXME: Read individual Sector Protection Registers. */ + break; + case 0x3 << 2: + msg_cdbg("all sectors are protected\n"); + break; + default: + msg_cdbg("reserved for future use\n"); + break; + } +} + +int spi_prettyprint_status_register_at25df(struct flashchip *flash) +{ + uint8_t status; + + status = spi_read_status_register(); + msg_cdbg("Chip status register is %02x\n", status); + + spi_prettyprint_status_register_atmel_at25_srpl(status); + spi_prettyprint_status_register_bit(status, 6); + spi_prettyprint_status_register_atmel_at25_epewpp(status); + spi_prettyprint_status_register_atmel_at25_swp(status); + spi_prettyprint_status_register_welwip(status); + return 0; +} + +int spi_prettyprint_status_register_at25df_sec(struct flashchip *flash) +{ + /* FIXME: We should check the security lockdown. */ + msg_cdbg("Ignoring security lockdown (if present)\n"); + msg_cdbg("Ignoring status register byte 2\n"); + return spi_prettyprint_status_register_at25df(flash); +} + +int spi_prettyprint_status_register_at25f(struct flashchip *flash) +{ + uint8_t status; + + status = spi_read_status_register(); + msg_cdbg("Chip status register is %02x\n", status); + + spi_prettyprint_status_register_atmel_at25_srpl(status); + spi_prettyprint_status_register_bit(status, 6); + spi_prettyprint_status_register_atmel_at25_epewpp(status); + spi_prettyprint_status_register_bit(status, 3); + msg_cdbg("Chip status register: Block Protect 0 (BP0) is " + "%sset, %s sectors are protected\n", + (status & (1 << 2)) ? "" : "not ", + (status & (1 << 2)) ? "all" : "no"); + spi_prettyprint_status_register_welwip(status); + return 0; +} + +int spi_prettyprint_status_register_at25fs010(struct flashchip *flash) +{ + uint8_t status; + + status = spi_read_status_register(); + msg_cdbg("Chip status register is %02x\n", status); + + msg_cdbg("Chip status register: Status Register Write Protect (WPEN) " + "is %sset\n", (status & (1 << 7)) ? "" : "not "); + msg_cdbg("Chip status register: Bit 6 / Block Protect 4 (BP4) is " + "%sset\n", (status & (1 << 6)) ? "" : "not "); + msg_cdbg("Chip status register: Bit 5 / Block Protect 3 (BP3) is " + "%sset\n", (status & (1 << 5)) ? "" : "not "); + msg_cdbg("Chip status register: Bit 4 is " + "%sset\n", (status & (1 << 4)) ? "" : "not "); + msg_cdbg("Chip status register: Bit 3 / Block Protect 1 (BP1) is " + "%sset\n", (status & (1 << 3)) ? "" : "not "); + msg_cdbg("Chip status register: Bit 2 / Block Protect 0 (BP0) is " + "%sset\n", (status & (1 << 2)) ? "" : "not "); + /* FIXME: Pretty-print detailed sector protection status. */ + spi_prettyprint_status_register_welwip(status); + return 0; +} + +int spi_prettyprint_status_register_at25fs040(struct flashchip *flash) +{ + uint8_t status; + + status = spi_read_status_register(); + msg_cdbg("Chip status register is %02x\n", status); + + msg_cdbg("Chip status register: Status Register Write Protect (WPEN) " + "is %sset\n", (status & (1 << 7)) ? "" : "not "); + msg_cdbg("Chip status register: Bit 6 / Block Protect 4 (BP4) is " + "%sset\n", (status & (1 << 6)) ? "" : "not "); + msg_cdbg("Chip status register: Bit 5 / Block Protect 3 (BP3) is " + "%sset\n", (status & (1 << 5)) ? "" : "not "); + msg_cdbg("Chip status register: Bit 4 / Block Protect 2 (BP2) is " + "%sset\n", (status & (1 << 4)) ? "" : "not "); + msg_cdbg("Chip status register: Bit 3 / Block Protect 1 (BP1) is " + "%sset\n", (status & (1 << 3)) ? "" : "not "); + msg_cdbg("Chip status register: Bit 2 / Block Protect 0 (BP0) is " + "%sset\n", (status & (1 << 2)) ? "" : "not "); + /* FIXME: Pretty-print detailed sector protection status. */ + spi_prettyprint_status_register_welwip(status); + return 0; +} + +int spi_prettyprint_status_register_atmel_at26df081a(struct flashchip *flash) +{ + uint8_t status; + + status = spi_read_status_register(); + msg_cdbg("Chip status register is %02x\n", status); + + spi_prettyprint_status_register_atmel_at25_srpl(status); + msg_cdbg("Chip status register: Sequential Program Mode Status (SPM) " + "is %sset\n", (status & (1 << 6)) ? "" : "not "); + spi_prettyprint_status_register_atmel_at25_epewpp(status); + spi_prettyprint_status_register_atmel_at25_swp(status); + spi_prettyprint_status_register_welwip(status); + return 0; +} + +int spi_disable_blockprotect_at25df(struct flashchip *flash) +{ + uint8_t status; + int result; + + status = spi_read_status_register(); + /* If block protection is disabled, stop here. */ + if ((status & (3 << 2)) == 0) + return 0; + + msg_cdbg("Some block protection in effect, disabling\n"); + if (status & (1 << 7)) { + msg_cdbg("Need to disable Sector Protection Register Lock\n"); + if ((status & (1 << 4)) == 0) { + msg_cerr("WP# pin is active, disabling " + "write protection is impossible.\n"); + return 1; + } + /* All bits except bit 7 (SPRL) are readonly. */ + result = spi_write_status_register(flash, status & ~(1 << 7)); + if (result) { + msg_cerr("spi_write_status_register failed\n"); + return result; + } + + } + /* Global unprotect. Make sure to mask SPRL as well. */ + result = spi_write_status_register(flash, status & ~0xbc); + if (result) { + msg_cerr("spi_write_status_register failed\n"); + return result; + } + status = spi_read_status_register(); + if ((status & (3 << 2)) != 0) { + msg_cerr("Block protection could not be disabled!\n"); + return 1; + } + return 0; +} + +int spi_disable_blockprotect_at25df_sec(struct flashchip *flash) +{ + /* FIXME: We should check the security lockdown. */ + msg_cinfo("Ignoring security lockdown (if present)\n"); + return spi_disable_blockprotect_at25df(flash); +} + +int spi_disable_blockprotect_at25f(struct flashchip *flash) +{ + /* spi_disable_blockprotect_at25df is not really the right way to do + * this, but the side effects of said function work here as well. + */ + return spi_disable_blockprotect_at25df(flash); +} + +int spi_disable_blockprotect_at25fs010(struct flashchip *flash) +{ + uint8_t status; + int result; + + status = spi_read_status_register(); + /* If block protection is disabled, stop here. */ + if ((status & 0x6c) == 0) + return 0; + + msg_cdbg("Some block protection in effect, disabling\n"); + if (status & (1 << 7)) { + msg_cdbg("Need to disable Status Register Write Protect\n"); + /* Clear bit 7 (WPEN). */ + result = spi_write_status_register(flash, status & ~(1 << 7)); + if (result) { + msg_cerr("spi_write_status_register failed\n"); + return result; + } + } + /* Global unprotect. Make sure to mask WPEN as well. */ + result = spi_write_status_register(flash, status & ~0xec); + if (result) { + msg_cerr("spi_write_status_register failed\n"); + return result; + } + status = spi_read_status_register(); + if ((status & 0x6c) != 0) { + msg_cerr("Block protection could not be disabled!\n"); + return 1; + } + return 0; +} + +int spi_disable_blockprotect_at25fs040(struct flashchip *flash) +{ + uint8_t status; + int result; + + status = spi_read_status_register(); + /* If block protection is disabled, stop here. */ + if ((status & 0x7c) == 0) + return 0; + + msg_cdbg("Some block protection in effect, disabling\n"); + if (status & (1 << 7)) { + msg_cdbg("Need to disable Status Register Write Protect\n"); + /* Clear bit 7 (WPEN). */ + result = spi_write_status_register(flash, status & ~(1 << 7)); + if (result) { + msg_cerr("spi_write_status_register failed\n"); + return result; + } + } + /* Global unprotect. Make sure to mask WPEN as well. */ + result = spi_write_status_register(flash, status & ~0xfc); + if (result) { + msg_cerr("spi_write_status_register failed\n"); + return result; + } + status = spi_read_status_register(); + if ((status & 0x7c) != 0) { + msg_cerr("Block protection could not be disabled!\n"); + return 1; + } + return 0; +} Index: flashrom-spi_prettyprint_statusreg_a25_at25/spi25.c =================================================================== --- flashrom-spi_prettyprint_statusreg_a25_at25/spi25.c (Revision 1245) +++ flashrom-spi_prettyprint_statusreg_a25_at25/spi25.c (Arbeitskopie) @@ -29,8 +29,6 @@ #include "programmer.h" #include "spi.h" -void spi_prettyprint_status_register(struct flashchip *flash); - static int spi_rdid(unsigned char *readarr, int bytes) { const unsigned char cmd[JEDEC_RDID_OUTSIZE] = { JEDEC_RDID }; @@ -312,7 +310,7 @@ } /* Prettyprint the status register. Common definitions. */ -static void spi_prettyprint_status_register_welwip(uint8_t status) +void spi_prettyprint_status_register_welwip(uint8_t status) { msg_cdbg("Chip status register: Write Enable Latch (WEL) is " "%sset\n", (status & (1 << 1)) ? "" : "not "); @@ -321,144 +319,38 @@ } /* Prettyprint the status register. Common definitions. */ -static void spi_prettyprint_status_register_common(uint8_t status) +void spi_prettyprint_status_register_bp3210(uint8_t status, int bp) { - msg_cdbg("Chip status register: Bit 5 / Block Protect 3 (BP3) is " - "%sset\n", (status & (1 << 5)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 4 / Block Protect 2 (BP2) is " - "%sset\n", (status & (1 << 4)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 3 / Block Protect 1 (BP1) is " - "%sset\n", (status & (1 << 3)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 2 / Block Protect 0 (BP0) is " - "%sset\n", (status & (1 << 2)) ? "" : "not "); - spi_prettyprint_status_register_welwip(status); -} - -/* Prettyprint the status register. Works for - * AMIC A25L series - */ -void spi_prettyprint_status_register_amic_a25l(uint8_t status) -{ - msg_cdbg("Chip status register: Status Register Write Disable " - "(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not "); - spi_prettyprint_status_register_common(status); -} - -/* Prettyprint the status register. Common definitions. */ -static void spi_prettyprint_status_register_at25_srplepewpp(uint8_t status) -{ - msg_cdbg("Chip status register: Sector Protection Register Lock (SRPL) " - "is %sset\n", (status & (1 << 7)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 6 " - "is %sset\n", (status & (1 << 6)) ? "" : "not "); - msg_cdbg("Chip status register: Erase/Program Error (EPE) " - "is %sset\n", (status & (1 << 5)) ? "" : "not "); - msg_cdbg("Chip status register: WP# pin (WPP) " - "is %sactive\n", (status & (1 << 4)) ? "not " : ""); -} - -int spi_prettyprint_status_register_at25df(struct flashchip *flash) -{ - uint8_t status; - - status = spi_read_status_register(); - msg_cdbg("Chip status register is %02x\n", status); - - spi_prettyprint_status_register_at25_srplepewpp(status); - msg_cdbg("Chip status register: Software Protection Status (SWP): "); - switch (status & (3 << 2)) { - case 0x0 << 2: - msg_cdbg("no sectors are protected\n"); - break; - case 0x1 << 2: - msg_cdbg("some sectors are protected\n"); - /* FIXME: Read individual Sector Protection Registers. */ - break; - case 0x3 << 2: - msg_cdbg("all sectors are protected\n"); - break; - default: - msg_cdbg("reserved for future use\n"); - break; + switch (bp) { + /* Fall through. */ + case 3: + msg_cdbg("Chip status register: Bit 5 / Block Protect 3 (BP3) " + "is %sset\n", (status & (1 << 5)) ? "" : "not "); + case 2: + msg_cdbg("Chip status register: Bit 4 / Block Protect 2 (BP2) " + "is %sset\n", (status & (1 << 4)) ? "" : "not "); + case 1: + msg_cdbg("Chip status register: Bit 3 / Block Protect 1 (BP1) " + "is %sset\n", (status & (1 << 3)) ? "" : "not "); + case 0: + msg_cdbg("Chip status register: Bit 2 / Block Protect 0 (BP0) " + "is %sset\n", (status & (1 << 2)) ? "" : "not "); } - spi_prettyprint_status_register_welwip(status); - return 0; } -int spi_prettyprint_status_register_at25df_sec(struct flashchip *flash) +/* Prettyprint the status register. Unnamed bits. */ +void spi_prettyprint_status_register_bit(uint8_t status, int bit) { - /* FIXME: We should check the security lockdown. */ - msg_cdbg("Ignoring security lockdown (if present)\n"); - msg_cdbg("Ignoring status register byte 2\n"); - return spi_prettyprint_status_register_at25df(flash); + msg_cdbg("Chip status register: Bit %i " + "is %sset\n", bit, (status & (1 << bit)) ? "" : "not "); } -int spi_prettyprint_status_register_at25f(struct flashchip *flash) +static void spi_prettyprint_status_register_common(uint8_t status) { - uint8_t status; - - status = spi_read_status_register(); - msg_cdbg("Chip status register is %02x\n", status); - - spi_prettyprint_status_register_at25_srplepewpp(status); - msg_cdbg("Chip status register: Bit 3 " - "is %sset\n", (status & (1 << 3)) ? "" : "not "); - msg_cdbg("Chip status register: Block Protect 0 (BP0) is " - "%sset, %s sectors are protected\n", - (status & (1 << 2)) ? "" : "not ", - (status & (1 << 2)) ? "all" : "no"); + spi_prettyprint_status_register_bp3210(status, 3); spi_prettyprint_status_register_welwip(status); - return 0; } -int spi_prettyprint_status_register_at25fs010(struct flashchip *flash) -{ - uint8_t status; - - status = spi_read_status_register(); - msg_cdbg("Chip status register is %02x\n", status); - - msg_cdbg("Chip status register: Status Register Write Protect (WPEN) " - "is %sset\n", (status & (1 << 7)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 6 / Block Protect 4 (BP4) is " - "%sset\n", (status & (1 << 6)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 5 / Block Protect 3 (BP3) is " - "%sset\n", (status & (1 << 5)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 4 is " - "%sset\n", (status & (1 << 4)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 3 / Block Protect 1 (BP1) is " - "%sset\n", (status & (1 << 3)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 2 / Block Protect 0 (BP0) is " - "%sset\n", (status & (1 << 2)) ? "" : "not "); - /* FIXME: Pretty-print detailed sector protection status. */ - spi_prettyprint_status_register_welwip(status); - return 0; -} - -int spi_prettyprint_status_register_at25fs040(struct flashchip *flash) -{ - uint8_t status; - - status = spi_read_status_register(); - msg_cdbg("Chip status register is %02x\n", status); - - msg_cdbg("Chip status register: Status Register Write Protect (WPEN) " - "is %sset\n", (status & (1 << 7)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 6 / Block Protect 4 (BP4) is " - "%sset\n", (status & (1 << 6)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 5 / Block Protect 3 (BP3) is " - "%sset\n", (status & (1 << 5)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 4 / Block Protect 2 (BP2) is " - "%sset\n", (status & (1 << 4)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 3 / Block Protect 1 (BP1) is " - "%sset\n", (status & (1 << 3)) ? "" : "not "); - msg_cdbg("Chip status register: Bit 2 / Block Protect 0 (BP0) is " - "%sset\n", (status & (1 << 2)) ? "" : "not "); - /* FIXME: Pretty-print detailed sector protection status. */ - spi_prettyprint_status_register_welwip(status); - return 0; -} - /* Prettyprint the status register. Works for * ST M25P series * MX MX25L series @@ -514,17 +406,13 @@ bpt[(status & 0x1c) >> 2]); } -void spi_prettyprint_status_register(struct flashchip *flash) +int spi_prettyprint_status_register(struct flashchip *flash) { uint8_t status; status = spi_read_status_register(); msg_cdbg("Chip status register is %02x\n", status); switch (flash->manufacture_id) { - case AMIC_ID: - if ((flash->model_id & 0xff00) == 0x2000) - spi_prettyprint_status_register_amic_a25l(status); - break; case ST_ID: if (((flash->model_id & 0xff00) == 0x2000) || ((flash->model_id & 0xff00) == 0x2500)) @@ -549,6 +437,7 @@ } break; } + return 0; } int spi_chip_erase_60(struct flashchip *flash) @@ -949,7 +838,7 @@ return 0; } -static int spi_write_status_register(struct flashchip *flash, int status) +int spi_write_status_register(struct flashchip *flash, int status) { int ret = 1; @@ -1075,128 +964,6 @@ return 0; } -int spi_disable_blockprotect_at25df(struct flashchip *flash) -{ - uint8_t status; - int result; - - status = spi_read_status_register(); - /* If block protection is disabled, stop here. */ - if ((status & (3 << 2)) == 0) - return 0; - - msg_cdbg("Some block protection in effect, disabling\n"); - if (status & (1 << 7)) { - msg_cdbg("Need to disable Sector Protection Register Lock\n"); - if ((status & (1 << 4)) == 0) { - msg_cerr("WP# pin is active, disabling " - "write protection is impossible.\n"); - return 1; - } - /* All bits except bit 7 (SPRL) are readonly. */ - result = spi_write_status_register(flash, status & ~(1 << 7)); - if (result) { - msg_cerr("spi_write_status_register failed\n"); - return result; - } - - } - /* Global unprotect. Make sure to mask SPRL as well. */ - result = spi_write_status_register(flash, status & ~0xbc); - if (result) { - msg_cerr("spi_write_status_register failed\n"); - return result; - } - status = spi_read_status_register(); - if ((status & (3 << 2)) != 0) { - msg_cerr("Block protection could not be disabled!\n"); - return 1; - } - return 0; -} - -int spi_disable_blockprotect_at25df_sec(struct flashchip *flash) -{ - /* FIXME: We should check the security lockdown. */ - msg_cinfo("Ignoring security lockdown (if present)\n"); - return spi_disable_blockprotect_at25df(flash); -} - -int spi_disable_blockprotect_at25f(struct flashchip *flash) -{ - /* spi_disable_blockprotect_at25df is not really the right way to do - * this, but the side effects of said function work here as well. - */ - return spi_disable_blockprotect_at25df(flash); -} - -int spi_disable_blockprotect_at25fs010(struct flashchip *flash) -{ - uint8_t status; - int result; - - status = spi_read_status_register(); - /* If block protection is disabled, stop here. */ - if ((status & 0x6c) == 0) - return 0; - - msg_cdbg("Some block protection in effect, disabling\n"); - if (status & (1 << 7)) { - msg_cdbg("Need to disable Status Register Write Protect\n"); - /* Clear bit 7 (WPEN). */ - result = spi_write_status_register(flash, status & ~(1 << 7)); - if (result) { - msg_cerr("spi_write_status_register failed\n"); - return result; - } - } - /* Global unprotect. Make sure to mask WPEN as well. */ - result = spi_write_status_register(flash, status & ~0xec); - if (result) { - msg_cerr("spi_write_status_register failed\n"); - return result; - } - status = spi_read_status_register(); - if ((status & 0x6c) != 0) { - msg_cerr("Block protection could not be disabled!\n"); - return 1; - } - return 0; -} -int spi_disable_blockprotect_at25fs040(struct flashchip *flash) -{ - uint8_t status; - int result; - - status = spi_read_status_register(); - /* If block protection is disabled, stop here. */ - if ((status & 0x7c) == 0) - return 0; - - msg_cdbg("Some block protection in effect, disabling\n"); - if (status & (1 << 7)) { - msg_cdbg("Need to disable Status Register Write Protect\n"); - /* Clear bit 7 (WPEN). */ - result = spi_write_status_register(flash, status & ~(1 << 7)); - if (result) { - msg_cerr("spi_write_status_register failed\n"); - return result; - } - } - /* Global unprotect. Make sure to mask WPEN as well. */ - result = spi_write_status_register(flash, status & ~0xfc); - if (result) { - msg_cerr("spi_write_status_register failed\n"); - return result; - } - status = spi_read_status_register(); - if ((status & 0x7c) != 0) { - msg_cerr("Block protection could not be disabled!\n"); - return 1; - } - return 0; -} - int spi_nbyte_read(int address, uint8_t *bytes, int len) { const unsigned char cmd[JEDEC_READ_OUTSIZE] = { Index: flashrom-spi_prettyprint_statusreg_a25_at25/flashchips.c =================================================================== --- flashrom-spi_prettyprint_statusreg_a25_at25/flashchips.c (Revision 1245) +++ flashrom-spi_prettyprint_statusreg_a25_at25/flashchips.c (Arbeitskopie) @@ -300,6 +300,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l05p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -331,6 +332,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l05p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -363,6 +365,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l05p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -395,6 +398,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l05p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -427,6 +431,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l05p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -459,6 +464,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l05p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -496,6 +502,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -528,6 +535,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -560,6 +568,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -595,6 +604,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -630,6 +640,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -660,6 +671,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -690,6 +702,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -720,6 +733,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -750,6 +764,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -780,6 +795,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -810,6 +826,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -846,6 +863,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25l032, .unlock = NULL, /* Two status reg bytes (read with 0x35 and 0x05) */ .write = spi_chip_write_256, .read = spi_chip_read, @@ -882,6 +900,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_amic_a25lq032, .unlock = NULL, /* Two status reg bytes (read with 0x35 and 0x05) */ .write = spi_chip_write_256, .read = spi_chip_read, @@ -1499,6 +1518,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_atmel_at26df081a, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -1534,6 +1554,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_at25df, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -1569,6 +1590,7 @@ .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_atmel_at26df081a, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -1586,6 +1608,7 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, + .printlock = spi_prettyprint_status_register_atmel_at26df081a, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, Index: flashrom-spi_prettyprint_statusreg_a25_at25/chipdrivers.h =================================================================== --- flashrom-spi_prettyprint_statusreg_a25_at25/chipdrivers.h (Revision 1245) +++ flashrom-spi_prettyprint_statusreg_a25_at25/chipdrivers.h (Arbeitskopie) @@ -43,23 +43,37 @@ int spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, int len); int spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len); uint8_t spi_read_status_register(void); +int spi_write_status_register(struct flashchip *flash, int status); +void spi_prettyprint_status_register_bit(uint8_t status, int bit); +void spi_prettyprint_status_register_bp3210(uint8_t status, int bp); +void spi_prettyprint_status_register_welwip(uint8_t status); +int spi_prettyprint_status_register(struct flashchip *flash); +int spi_disable_blockprotect(struct flashchip *flash); +int spi_byte_program(int addr, uint8_t databyte); +int spi_nbyte_program(int addr, uint8_t *bytes, int len); +int spi_nbyte_read(int addr, uint8_t *bytes, int len); +int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); +int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); +int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len); + +/* a25.c */ +int spi_prettyprint_status_register_amic_a25l05p(struct flashchip *flash); +int spi_prettyprint_status_register_amic_a25l40p(struct flashchip *flash); +int spi_prettyprint_status_register_amic_a25l032(struct flashchip *flash); +int spi_prettyprint_status_register_amic_a25lq032(struct flashchip *flash); + +/* at25.c */ int spi_prettyprint_status_register_at25df(struct flashchip *flash); int spi_prettyprint_status_register_at25df_sec(struct flashchip *flash); int spi_prettyprint_status_register_at25f(struct flashchip *flash); int spi_prettyprint_status_register_at25fs010(struct flashchip *flash); int spi_prettyprint_status_register_at25fs040(struct flashchip *flash); -int spi_disable_blockprotect(struct flashchip *flash); +int spi_prettyprint_status_register_atmel_at26df081a(struct flashchip *flash); int spi_disable_blockprotect_at25df(struct flashchip *flash); int spi_disable_blockprotect_at25df_sec(struct flashchip *flash); int spi_disable_blockprotect_at25f(struct flashchip *flash); int spi_disable_blockprotect_at25fs010(struct flashchip *flash); int spi_disable_blockprotect_at25fs040(struct flashchip *flash); -int spi_byte_program(int addr, uint8_t databyte); -int spi_nbyte_program(int addr, uint8_t *bytes, int len); -int spi_nbyte_read(int addr, uint8_t *bytes, int len); -int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); -int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); -int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len); /* 82802ab.c */ uint8_t wait_82802ab(struct flashchip *flash); -- http://www.hailfinger.org/

2 7

GSOC 2011
by Stefan Tauner 19 May '11

19 May '11

hello since no one on irc even replied with "go away intel nazi!!11", i have to propose my idea here ;) i tried to get flashrom to work on my two main computers[1], but they don't work because of the EC/Intel's management engine (ME). i don't know for sure how the vendor tools do the flashing, but i presume that they talk to the ME via HECI to coordinate the process. There _was_ an attempt to get basic HECI and QST (intel quiet system technology) into the kernel to allow temperature readings etc. Intel abandoned it in 2009 [2]. my (project) idea is to try to reverse engineer some vendor tools to see how they work and try to reproduce it in flashrom to eventually support ME enabled motherboards in flashrom. i dunno how big the impact would be, but i guess this would allow even many laptops to be supported? what do you think about this idea and its feasibility? any volunteers for mentoring? :) 1: http://patchwork.coreboot.org/patch/2798/ 2: http://driverdev.linuxdriverproject.org/pipermail/devel/2009-September/0024… also i have some questions about the "official" ideas: UI: - With TUI do you mean (something like) ncurses? - the "current" code is [3]? i have not looked into it yet. - has it to use qt and/or that code (i like java *hide* and have a bit of gdk experience)? recovery stuff: guess it would be mandatory to have a working coreboot setup with real hardware for that? bitbanging support: this would also require available hardware. would i have to buy that myself? can it be borrowed from someone? these projects would probably profit from my open workbench logic analyzer... the infrastructure things sound a bit boring, but from what i saw in the source some refactoring would (also) improve the codebase somewhat. ;) so the infrastructure-related projects may be even the most valuable contribution for longterm goals. ok that was not really a question, sorry. if there are other ideas i would love to hear them (soon). thanks! 3: http://gitorious.org/flashrom/flashrom-gui/commits/master -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

3 6

[PATCH] Mark MX25L4005 tested for erase
by GatoLoko 18 May '11

18 May '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've tested the erase operation on Macronix MX25L4005 SPI chip. Signed-off-by: Raúl Soriano <GatoLoko(a)gmail.com> -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkzDjmAACgkQ063tJLOwQufNLgCeOiPRPOPkQNaYhsBrWagIE4oR n9EAn3Z6UXgsQSzEYNtOZrRRi53QhT6V =MHSr -----END PGP SIGNATURE-----

3 2

Re: [flashrom] [PATCH] fix typo "not not" in board_enable.c
by Idwer Vollering 18 May '11

18 May '11

2011/4/13 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>: > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer(a)gmail.com> > --- > board_enable.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/board_enable.c b/board_enable.c > index d459b98..e8b3ad3 100644 > --- a/board_enable.c > +++ b/board_enable.c > @@ -2123,7 +2123,7 @@ int board_flash_enable(const char *vendor, const char *part) > if (board && board->status == NT) { > if (!force_boardenable) { > msg_pinfo("WARNING: Your mainboard is %s %s, but the mainboard-specific\n" > - "code has not been tested, and thus will not not be executed by default.\n" > + "code has not been tested, and thus will not be executed by default.\n" > "Depending on your hardware environment, erasing, writing or even probing\n" > "can fail without running the board specific code.\n\n" > "Please see the man page (section PROGRAMMER SPECIFIC INFO, subsection\n" > -- > 1.7.1 > > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom >

2 1

Re: [flashrom] Intel X58 Tylersburg Mainboard
by Idwer Vollering 18 May '11

18 May '11

2011/4/21 Shailendra Sodhi <shailendra.sodhi(a)endace.com>: > I think it's X8DTH-6F, please see dmidecode output below: We can't really tell that, from the dmidecode output. Please consult your documentation. By the way, would you be so kind and use the "reply to all" button ? > > [root@sys7000-1 flashrom]# dmidecode -t 2 > # dmidecode 2.10 > SMBIOS 2.6 present. > > Handle 0x0002, DMI type 2, 15 bytes > Base Board Information > Manufacturer: Supermicro > Product Name: X8DTH > Version: 1234567890 > Serial Number: 1234567890 > Asset Tag: To Be Filled By O.E.M. > Features: > Board is a hosting board > Board is replaceable > Location In Chassis: To Be Filled By O.E.M. > Chassis Handle: 0x0003 > Type: Motherboard > Contained Object Handles: 0 > > > [root@sys7000-1 flashrom]# dmidecode -t 1 > # dmidecode 2.10 > SMBIOS 2.6 present. > > Handle 0x0001, DMI type 1, 27 bytes > System Information > Manufacturer: Supermicro > Product Name: X8DTH-i/6/iF/6F > Version: 1234567890 > Serial Number: 1234567890 > UUID: 02050D04-0904-0205-0000-000000000000 > Wake-up Type: Power Switch > SKU Number: To Be Filled By O.E.M. > Family: Server > > Please confirm so I can edit print.c > > On Thu, 2011-04-21 at 01:08 +0200, Idwer Vollering wrote: >> 2011/4/21 Shailendra Sodhi <shailendra.sodhi(a)endace.com>: >> > Please find attached patch. >> > >> > Signed-off-by:Shailendra Sodhi <shailendra.sodhi(a)endace.com> >> >> Thanks. Is this the Tylersburg board in question: >> http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-iF.cfm ? >> Can you edit print.c as well, adding the board name and the forementionned URL ? >> >> Once you have done so, I'll ack. >> >> Idwer > > >

3 5

Re: [flashrom] new bios to support
by Joe Tym 18 May '11

18 May '11

hi, thanks for your help in the irc channel with my hosed bios, my motherboard is an aopen i975xa-ydg, drivers are here: http://download.aopen.com.tw/Default.aspx ( no direct link i'm afraid ) i've attached the bin which i was trying to install + txt files containing the output you requested, if you could get it working that would be fantastic thanks, Joe Tym A non-text attachment has been removed: ICA1AC.BIN

6 9

Re: [flashrom] [PATCH 2/2] mark EVGA 270-WS-W555-A2 (Classified SR-2) as supported.
by Idwer Vollering 18 May '11

18 May '11

2011/4/16 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>: > success report: http://flashrom.org/pipermail/flashrom/2011-April/006179.html > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer(a)gmail.com> > --- > print.c | 1 + > 1 files changed, 1 insertions(+), 0 deletions(-) > > diff --git a/print.c b/print.c > index dd7c5b4..b38fa59 100644 > --- a/print.c > +++ b/print.c > @@ -461,6 +461,7 @@ const struct board_info boards_known[] = { > B("EPoX", "EP-8RDA3+", 1, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL), > B("EPoX", "EP-BX3", 1, "http://www.epox.com/product.asp?ID=EP-BX3", NULL), > B("EVGA", "132-CK-NF78", 1, "http://http://www.evga.com/articles/385.asp", NULL), > + B("EVGA", "270-WS-W555-A2 (Classified SR-2)", 1, "http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL), > B("FIC", "VA-502", 0, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI subsystem IDs are identical with the Tekram P6Pro-A5. May work now."), > B("Foxconn", "6150K8MD-8EKRSH", 1, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL), > B("Foxconn", "A6VMX", 1, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL), > -- > 1.7.1 > > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom >

2 1

Re: [flashrom] [PATCH 1/2] mark SST25VF032B as write tested.
by Idwer Vollering 18 May '11

18 May '11

2 1

← Newer
1
...
5
6
7
8
9
10
11
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom April 2011