November 2011 - flashrom - mail.coreboot.org

P8H61 PRO
by Pavel Petrov 30 Nov '11

30 Nov '11

flashrom --read /bios.rom -V flashrom v0.9.4-r1394 on Linux 3.0.0-14-generic-pae (i686), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3351M loops per second, 10 myus = 10 us, 100 myus = 98 us, 1000 myus = 986 us, 10000 myus = 9984 us, 4 myus = 3 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P8H61 PRO" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found chipset "Intel H61" with PCI ID 8086:1c5c. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc04: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00001000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-only 0x58: 0x03ff0180 (FREG1: BIOS) 0x00180000-0x003fffff is read-write 0x5C: 0x017f0001 (FREG2: Management Engine) 0x00001000-0x0017ffff is locked 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf80000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x3b, id2 0x18, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x4d, id2 0x65, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x4d, id2 0x65, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Chip status register is 00 Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x15 Reading flash... Transaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 Running OPCODE 0x03 failed at address 0x001000 (payload length was 64). Read operation failed! FAILED. Restoring MMIO space at 0xb77d48a0 Restoring MMIO space at 0xb77d489c Restoring MMIO space at 0xb77d4898 Restoring MMIO space at 0xb77d4896 Restoring MMIO space at 0xb77d4894 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Untested chipset' verbose log
by Eugene vm_ 29 Nov '11

29 Nov '11

Hello! Sending you verbose flashrom log for VIA VT82C686A/B, marked as untested. Feel free to request any additional hardware or software config information. Regards. -- Eugene 'vm_' Vdovenko<vm_(a)viem77.org>

1 0

Re: [flashrom] [PATCH] ichspi.c: warn user when a protected region is detected
by David Hendricks 27 Nov '11

27 Nov '11

On Sat, Nov 26, 2011 at 3:35 PM, Stefan Tauner < stefan.tauner(a)student.tuwien.ac.at> wrote: > This includes the notorious read-only flash descriptors and locked ME > regions. > --- > non-verbose sample output from my laptop: > […] > Found chipset "Intel QS57". Enabling flash write... WARNING: SPI > Configuration Lockdown activated. > WARNING: Flash Descriptor region is not fully accessible and flashrom can > not deal with this correctly yet. Intel does not provide us the necessary > documention to support this. To be fair, I think Intel documents it fine. I think what we've got to do is checking the flash descriptor override pin strap status (FDOPSS). If it is cleared then we can ignore the descriptor, otherwise if it is set then we need to avoid locked regions. It's really just a pain in the ass and, as you pointed out, may leave the BIOS/ME firmware blobs in an inconsistent or incompatible state. So the onus is on the user to ensure a safe upgrade path if only part of the ROM can be updated. It's probably worth displaying a warning and requiring "--force" or something in that scenario.

1 0

[PATCH] ichspi.c: warn user when a protected region is detected
by Stefan Tauner 27 Nov '11

27 Nov '11

This includes the notorious read-only flash descriptors and locked ME regions. --- non-verbose sample output from my laptop: […] Found chipset "Intel QS57". Enabling flash write... WARNING: SPI Configuration Lockdown activated. WARNING: Flash Descriptor region is not fully accessible and flashrom can not deal with this correctly yet. Intel does not provide us the necessary documention to support this. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. WARNING: Management Engine region is not fully accessible and flashrom can not deal with this correctly yet. Intel does not provide us the necessary documention to support this. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. OK. Found Winbond flash chip "W25X64" (8192 kB, SPI) at physical address 0xff800000. […] Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- ichspi.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/ichspi.c b/ichspi.c index 78cdb3b..4bd04d0 100644 --- a/ichspi.c +++ b/ichspi.c @@ -1447,6 +1447,15 @@ static void do_ich9_spi_frap(uint32_t frap, int i) msg_pdbg("0x%08x-0x%08x is %s\n", base, (limit | 0x0fff), access_names[rwperms]); + if (rwperms != 0x3) + msg_pinfo("WARNING: %s region is not fully accessible and " + "flashrom can\nnot deal with this correctly yet. " + "Intel does not provide us the necessary\n" + "documention to support this. Please send a verbose " + "log to\nflashrom(a)flashrom.org if this board is not " + "listed on\n" + "http://flashrom.org/Supported_hardware#Supported_mainboards " + "yet.\n", region_names[i]); } /* In contrast to FRAP and the master section of the descriptor the bits -- 1.7.1

1 0

SST25LF040A
by Vladimir Monchenko 26 Nov '11

26 Nov '11

Hi. I have tested reading, erasing and writing with SPI flash SST25LF040A. All works OK. Report in attachment. Regards, Vladimir Monchenko.

2 1

P8P67 REV 3.1 - Intel P67
by Gerhard Scheikl 26 Nov '11

26 Nov '11

description: Motherboard product: P8P67 REV 3.1 vendor: ASUSTeK Computer INC. physical id: 0 version: Rev 1.xx *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1704 date: 06/08/2011 size: 64KiB capacity: 4032KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification flashrom v0.9.4-r1394 on Linux 3.1.0-030100-meins (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3432M loops per second, 10 myus = 10 us, 100 myus = 123 us, 1000 myus = 982 us, 10000 myus = 9809 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P8P67 REV 3.1" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel P67" with PCI ID 8086:1c46. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc04: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00001000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-only 0x58: 0x03ff0180 (FREG1: BIOS) 0x00180000-0x003fffff is read-write 0x5C: 0x017f0001 (FREG2: Management Engine) 0x00001000-0x0017ffff is locked 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf80000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L3205" (4096 kB, SPI) at physical address 0xffc00000. Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x6c, id2 0x52, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x3a, id2 0xfb, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x3a, id2 0xfb, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x15 No operations were specified. Restoring MMIO space at 0x7f549377f8a0 Restoring MMIO space at 0x7f549377f89c Restoring MMIO space at 0x7f549377f898 Restoring MMIO space at 0x7f549377f896 Restoring MMIO space at 0x7f549377f894 Restoring PCI config space for 00:1f:0 reg 0xdc

2 1

Intel H57 chipset (untested) and W25Q64 flash -V output
by Pontus Rodling 26 Nov '11

26 Nov '11

Hi! flashrom told me to send you guys this, so here it is. I'm getting a transaction error when trying to read the (fully supported according to the wiki) W25Q64 flash chip on a Intel H57 chipset which is marked as untested. I tried both using swseq and hwseq. Both results are attached. // Pontus Rodling

3 2

[PATCH] Speed up dediprog writes
by Carl-Daniel Hailfinger 25 Nov '11

25 Nov '11

Totally untested patch, may exhaust the write limit of your flash chip or cause other weirdnesses. Don't blame me. Yes, there is other dediprog stuff in that patch as well. Need to finish that, but right now I need testers. If it works, all chips which use spi_chip_write_256 should be written at native speed. Chips using spi_chip_write_1 or spi_chip_write_aai will still be slow. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-dediprog_unknown_commands/dediprog.c =================================================================== --- flashrom-dediprog_unknown_commands/dediprog.c (Revision 1470) +++ flashrom-dediprog_unknown_commands/dediprog.c (Arbeitskopie) @@ -30,6 +30,7 @@ static usb_dev_handle *dediprog_handle; static int dediprog_firmwareversion; static int dediprog_endpoint; +static int dediprog_firmwareversion; #if 0 /* Might be useful for other pieces of code as well. */ @@ -299,22 +300,109 @@ return 0; } +/* Bulk write interface, will read multiple page_size byte chunks aligned to page_size bytes. + * @start start address + * @len length + * @return 0 on success, 1 on failure + */ +static int dediprog_spi_bulk_write(struct flashchip *flash, uint8_t *buf, + unsigned int start, unsigned int len) +{ + int ret; + unsigned int i; + /* USB transfer size must be 512, other sizes will NOT work at all. + * chunksize is the real data size per USB bulk transfer. The remaining + * space in a USB bulk transfer must be filled with 0xff padding. + */ + const unsigned int chunksize = flash->page_size; + const unsigned int count = len / chunksize; + const char count_and_chunk[] = {count & 0xff, + (count >> 8) & 0xff, + chunksize & 0xff, + (chunksize >> 8) & 0xff}; + char usbbuf[512]; + + if ((start % chunksize) || (len % chunksize)) { + msg_perr("%s: Unaligned start=%i, len=%i! Please report a bug " + "at flashrom(a)flashrom.org\n", __func__, start, len); + return 1; + } + + /* No idea if the hardware can handle empty writes, so chicken out. */ + if (!len) + return 0; + /* Command Write SPI Bulk. No idea which write command is used on the + * SPI side. + */ + ret = usb_control_msg(dediprog_handle, 0x42, 0x30, start % 0x10000, + start / 0x10000, (char *)count_and_chunk, + sizeof(count_and_chunk), DEFAULT_TIMEOUT); + if (ret != sizeof(count_and_chunk)) { + msg_perr("Command Write SPI Bulk failed, %i %s!\n", ret, + usb_strerror()); + return 1; + } + + for (i = 0; i < count; i++) { + memset(usbbuf, 0xff, sizeof(usbbuf)); + memcpy(usbbuf, buf + i * chunksize, chunksize); + ret = usb_bulk_write(dediprog_handle, dediprog_endpoint, + usbbuf, 512, + DEFAULT_TIMEOUT); + if (ret != 512) { + msg_perr("SPI bulk write failed, expected %i, got %i " + "%s!\n", 512, ret, usb_strerror()); + return 1; + } + } + + return 0; +} + static int dediprog_spi_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { int ret; + const unsigned int chunksize = flash->page_size; + unsigned int residue = start % chunksize ? chunksize - start % chunksize : 0; + unsigned int bulklen; dediprog_set_leds(PASS_OFF|BUSY_ON|ERROR_OFF); - /* No idea about the real limit. Maybe 12, maybe more, maybe less. */ - ret = spi_write_chunked(flash, buf, start, len, 12); + if (residue) { + msg_pdbg("Slow write for partial block from 0x%x, length 0x%x\n", + start, residue); + /* No idea about the real limit. Maybe 12, maybe more. */ + ret = spi_write_chunked(flash, buf, start, residue, 12); + if (ret) { + dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); + return ret; + } + } - if (ret) + /* Round down. */ + bulklen = (len - residue) / chunksize * chunksize; + ret = dediprog_spi_bulk_write(flash, buf + residue, start + residue, + bulklen); + if (ret) { dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); - else - dediprog_set_leds(PASS_ON|BUSY_OFF|ERROR_OFF); + return ret; + } - return ret; + len -= residue + bulklen; + if (len) { + msg_pdbg("Slow write for partial block from 0x%x, length 0x%x\n", + start, len); + ret = spi_write_chunked(flash, buf + residue + bulklen, + start + residue + bulklen, len, 12); + if (ret) { + dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); + return ret; + } + } + + dediprog_set_leds(PASS_ON|BUSY_OFF|ERROR_OFF); + return 0; } static int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, @@ -491,8 +579,80 @@ } return 0; } + +/* Start/stop blinking? + * Present in eng_detect_blink.log with firmware 3.1.8 + * Preceded by Command J + */ +static int dediprog_command_g(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x03, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command G failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} + +/* Something. + * Present in all logs with firmware 5.1.5 + * Always preceded by Command Receive Device String + * Always followed by Command Set SPI Voltage nonzero + */ +static int dediprog_command_h(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x05, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command H failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} #endif +/* Shutdown for firmware 5.x? + * Present in all logs with firmware 5.1.5 + * Often preceded by a SPI operation (Command Read SPI Bulk or Receive SPI) + * Always followed by Command Set SPI Voltage 0x0000 + */ +static int dediprog_command_i(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x06, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command I failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} + +#if 0 +/* Start/stop blinking? + * Present in all logs with firmware 5.1.5 + * Always preceded by Command Receive Device String on 5.1.5 + * Always followed by Command Set SPI Voltage nonzero on 5.1.5 + * Present in eng_detect_blink.log with firmware 3.1.8 + * Preceded by Command B in eng_detect_blink.log + * Followed by Command G in eng_detect_blink.log + */ +static int dediprog_command_j(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x07, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command J failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} +#endif + static int parse_voltage(char *voltage) { char *tmp = NULL; @@ -555,6 +715,11 @@ { msg_pspew("%s\n", __func__); + /* Shutdown on firmware 5.x */ + if (dediprog_firmwareversion == 5) + if (dediprog_command_i()) + return 1; + /* URB 28. Command Set SPI Voltage to 0. */ if (dediprog_set_spi_voltage(0x0)) return 1; -- http://www.hailfinger.org/

1 0

Re: [flashrom] [PATCH] Unsignify lengths and addresses in chip functions and structs
by Carl-Daniel Hailfinger 23 Nov '11

23 Nov '11

Am 19.09.2011 02:01 schrieb Stefan Tauner: > Push those changes forward where needed to prevent new sign > conversion warnings where possible. Thanks for your patch. > this is a crude rework of the reverted patch. i have tried to push > unsignedness wherever possible, but there are some problems: > ffs, min, max and some library/system calls require signed ints or > return them or both. We might want to provide type-safe min/max macros for those cases. An example is at http://gcc.gnu.org/onlinedocs/gcc/Typeof.html Not essential for this patch, but might be nice to have anyway. Later. > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > > > diff --git a/flash.h b/flash.h > index 535c1b8..e7bfd4e 100644 > --- a/flash.h > +++ b/flash.h > @@ -121,8 +121,10 @@ struct flashchip { > > int (*probe) (struct flashchip *flash); > > - /* Delay after "enter/exit ID mode" commands in microseconds. */ > - int probe_timing; > + /* Delay after "enter/exit ID mode" commands in microseconds. > + * NB: negative values have special meanings, see TIMING_* below. > + */ > + signed int probe_timing; AFAICS the C standard defines that int is always signed. The only exception is char which is implementation-defined. Please kill signed here, but keep your comment. > > /* > * Erase blocks and associated erase function. Any chip erase function > diff --git a/ft2232_spi.c b/ft2232_spi.c > index 8ab89fa..8f00685 100644 > --- a/ft2232_spi.c > +++ b/ft2232_spi.c > @@ -106,10 +106,10 @@ static const char *get_ft2232_vendorname(int ft2232_vid, int ft2232_type) > } > > static int send_buf(struct ftdi_context *ftdic, const unsigned char *buf, > - int size) > + unsigned int size) > { > int r; > - r = ftdi_write_data(ftdic, (unsigned char *) buf, size); > + r = ftdi_write_data(ftdic, (unsigned char *) buf, (int)size); This cast is a sign that something is odd. Can you keep size as a signed int? > if (r < 0) { > msg_perr("ftdi_write_data: %d, %s\n", r, > ftdi_get_error_string(ftdic)); > @@ -119,19 +119,19 @@ static int send_buf(struct ftdi_context *ftdic, const unsigned char *buf, > } > > static int get_buf(struct ftdi_context *ftdic, const unsigned char *buf, > - int size) > + unsigned int size) > { > int r; > > while (size > 0) { > - r = ftdi_read_data(ftdic, (unsigned char *) buf, size); > + r = ftdi_read_data(ftdic, (unsigned char *) buf, (int)size); Same here. > if (r < 0) { > msg_perr("ftdi_read_data: %d, %s\n", r, > ftdi_get_error_string(ftdic)); > return 1; > } > - buf += r; > - size -= r; > + buf += (unsigned int)r; > + size -= (unsigned int)r; ... > } > return 0; > } > @@ -332,9 +332,10 @@ static int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt, > struct ftdi_context *ftdic = &ftdic_context; > static unsigned char *buf = NULL; > /* failed is special. We use bitwise ops, but it is essentially bool. */ > - int i = 0, ret = 0, failed = 0; > - int bufsize; > - static int oldbufsize = 0; > + int ret = 0, failed = 0; > + unsigned int i = 0; > + unsigned int bufsize; > + static unsigned int oldbufsize = 0; > > if (writecnt > 65536 || readcnt > 65536) > return SPI_INVALID_LENGTH; get_buf and send_buf calls should be checked for size>=INT_MAX and the cast should happen in the call, not in get_buf/send_buf. > diff --git a/serprog.c b/serprog.c > index 9d554c9..94ae1c6 100644 > --- a/serprog.c > +++ b/serprog.c > @@ -707,7 +707,7 @@ uint8_t serprog_chip_readb(const chipaddr addr) > /* Local version that really does the job, doesn't care of max_read_n. */ > static void sp_do_read_n(uint8_t * buf, const chipaddr addr, size_t len) > { > - int rd_bytes = 0; > + unsigned int rd_bytes = 0; > unsigned char sbuf[6]; > msg_pspew("%s: addr=0x%lx len=%lu\n", __func__, addr, (unsigned long)len); > /* Stream the read-n -- as above. */ > @@ -725,7 +725,7 @@ static void sp_do_read_n(uint8_t * buf, const chipaddr addr, size_t len) > int r = read(sp_fd, buf + rd_bytes, len - rd_bytes); > if (r <= 0) > sp_die("Error: cannot read read-n data"); > - rd_bytes += r; > + rd_bytes += (unsigned int)r; Odd cast, but safe. You correctly analyzed that situation. > } while (rd_bytes != len); > return; > } > The flashrom.c changes were really hard to verify, but that's not your fault. The code in there is not easy to understand, but you got it exactly right. With the above comments this is Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 4

[commit] r1470 - trunk
by repository service 23 Nov '11

23 Nov '11

Author: stefanct Date: Wed Nov 23 10:13:48 2011 New Revision: 1470 URL: http://flashrom.org/trac/flashrom/changeset/1470 Log: Unsignify lengths and addresses in chip functions and structs Push those changes forward where needed to prevent new sign conversion warnings where possible. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/82802ab.c trunk/buspirate_spi.c trunk/chipdrivers.h trunk/dediprog.c trunk/dummyflasher.c trunk/flash.h trunk/flashrom.c trunk/ichspi.c trunk/it87spi.c trunk/jedec.c trunk/linux_spi.c trunk/m29f400bt.c trunk/opaque.c trunk/pm49fl00x.c trunk/programmer.h trunk/serprog.c trunk/spi.c trunk/spi25.c trunk/sst28sf040.c trunk/sst49lfxxxc.c trunk/w39.c trunk/wbsio_spi.c Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/82802ab.c Wed Nov 23 10:13:48 2011 (r1470) @@ -141,7 +141,7 @@ } /* chunksize is 1 */ -int write_82802ab(struct flashchip *flash, uint8_t *src, int start, int len) +int write_82802ab(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) { int i; chipaddr dst = flash->virtual_memory + start; Modified: trunk/buspirate_spi.c ============================================================================== --- trunk/buspirate_spi.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/buspirate_spi.c Wed Nov 23 10:13:48 2011 (r1470) @@ -295,7 +295,8 @@ const unsigned char *writearr, unsigned char *readarr) { static unsigned char *buf = NULL; - int i = 0, ret = 0; + unsigned int i = 0; + int ret = 0; if (writecnt > 16 || readcnt > 16 || (readcnt + writecnt) > 16) return SPI_INVALID_LENGTH; Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/chipdrivers.h Wed Nov 23 10:13:48 2011 (r1470) @@ -41,9 +41,9 @@ int spi_block_erase_d8(struct flashchip *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_60(struct flashchip *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_c7(struct flashchip *flash, unsigned int addr, unsigned int blocklen); -int spi_chip_write_1(struct flashchip *flash, uint8_t *buf, int start, int len); -int spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, int len); -int spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len); +int spi_chip_write_1(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int spi_chip_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int spi_chip_read(struct flashchip *flash, uint8_t *buf, unsigned int start, int unsigned len); uint8_t spi_read_status_register(void); int spi_write_status_register(struct flashchip *flash, int status); void spi_prettyprint_status_register_bit(uint8_t status, int bit); @@ -51,17 +51,17 @@ void spi_prettyprint_status_register_welwip(uint8_t status); int spi_prettyprint_status_register(struct flashchip *flash); int spi_disable_blockprotect(struct flashchip *flash); -int spi_byte_program(int addr, uint8_t databyte); -int spi_nbyte_program(int addr, uint8_t *bytes, int len); -int spi_nbyte_read(int addr, uint8_t *bytes, int len); -int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); -int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); -int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len); +int spi_byte_program(unsigned int addr, uint8_t databyte); +int spi_nbyte_program(unsigned int addr, uint8_t *bytes, unsigned int len); +int spi_nbyte_read(unsigned int addr, uint8_t *bytes, unsigned int len); +int spi_read_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); +int spi_write_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); +int spi_aai_write(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); /* opaque.c */ int probe_opaque(struct flashchip *flash); -int read_opaque(struct flashchip *flash, uint8_t *buf, int start, int len); -int write_opaque(struct flashchip *flash, uint8_t *buf, int start, int len); +int read_opaque(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int write_opaque(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); int erase_opaque(struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); /* a25.c */ @@ -87,7 +87,7 @@ uint8_t wait_82802ab(struct flashchip *flash); int probe_82802ab(struct flashchip *flash); int erase_block_82802ab(struct flashchip *flash, unsigned int page, unsigned int pagesize); -int write_82802ab(struct flashchip *flash, uint8_t *buf, int start, int len); +int write_82802ab(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); void print_status_82802ab(uint8_t status); int unlock_82802ab(struct flashchip *flash); int unlock_28f004s5(struct flashchip *flash); @@ -100,8 +100,8 @@ int write_byte_program_jedec(chipaddr bios, uint8_t *src, chipaddr dst); int probe_jedec(struct flashchip *flash); -int write_jedec(struct flashchip *flash, uint8_t *buf, int start, int len); -int write_jedec_1(struct flashchip *flash, uint8_t *buf, int start, int len); +int write_jedec(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int write_jedec_1(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); int erase_sector_jedec(struct flashchip *flash, unsigned int page, unsigned int pagesize); int erase_block_jedec(struct flashchip *flash, unsigned int page, unsigned int blocksize); int erase_chip_block_jedec(struct flashchip *flash, unsigned int page, unsigned int blocksize); @@ -110,7 +110,7 @@ int probe_m29f400bt(struct flashchip *flash); int block_erase_m29f400bt(struct flashchip *flash, unsigned int start, unsigned int len); int block_erase_chip_m29f400bt(struct flashchip *flash, unsigned int start, unsigned int len); -int write_m29f400bt(struct flashchip *flash, uint8_t *buf, int start, int len); +int write_m29f400bt(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); void protect_m29f400bt(chipaddr bios); /* pm49fl00x.c */ @@ -120,7 +120,7 @@ /* sst28sf040.c */ int erase_chip_28sf040(struct flashchip *flash, unsigned int addr, unsigned int blocklen); int erase_sector_28sf040(struct flashchip *flash, unsigned int address, unsigned int sector_size); -int write_28sf040(struct flashchip *flash, uint8_t *buf, int start, int len); +int write_28sf040(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); int unprotect_28sf040(struct flashchip *flash); int protect_28sf040(struct flashchip *flash); Modified: trunk/dediprog.c ============================================================================== --- trunk/dediprog.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/dediprog.c Wed Nov 23 10:13:48 2011 (r1470) @@ -206,13 +206,13 @@ * @return 0 on success, 1 on failure */ static int dediprog_spi_bulk_read(struct flashchip *flash, uint8_t *buf, - int start, int len) + unsigned int start, unsigned int len) { int ret; - int i; + unsigned int i; /* chunksize must be 512, other sizes will NOT work at all. */ - const int chunksize = 0x200; - const int count = len / chunksize; + const unsigned int chunksize = 0x200; + const unsigned int count = len / chunksize; const char count_and_chunk[] = {count & 0xff, (count >> 8) & 0xff, chunksize & 0xff, @@ -253,14 +253,14 @@ return 0; } -static int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, - int len) +static int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, + unsigned int start, unsigned int len) { int ret; /* chunksize must be 512, other sizes will NOT work at all. */ - const int chunksize = 0x200; - int residue = start % chunksize ? chunksize - start % chunksize : 0; - int bulklen; + const unsigned int chunksize = 0x200; + unsigned int residue = start % chunksize ? chunksize - start % chunksize : 0; + unsigned int bulklen; dediprog_set_leds(PASS_OFF|BUSY_ON|ERROR_OFF); @@ -300,7 +300,7 @@ } static int dediprog_spi_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len) + unsigned int start, unsigned int len) { int ret; Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/dummyflasher.c Wed Nov 23 10:13:48 2011 (r1470) @@ -46,24 +46,24 @@ }; static enum emu_chip emu_chip = EMULATE_NONE; static char *emu_persistent_image = NULL; -static int emu_chip_size = 0; +static unsigned int emu_chip_size = 0; #if EMULATE_SPI_CHIP -static int emu_max_byteprogram_size = 0; -static int emu_max_aai_size = 0; -static int emu_jedec_se_size = 0; -static int emu_jedec_be_52_size = 0; -static int emu_jedec_be_d8_size = 0; -static int emu_jedec_ce_60_size = 0; -static int emu_jedec_ce_c7_size = 0; +static unsigned int emu_max_byteprogram_size = 0; +static unsigned int emu_max_aai_size = 0; +static unsigned int emu_jedec_se_size = 0; +static unsigned int emu_jedec_be_52_size = 0; +static unsigned int emu_jedec_be_d8_size = 0; +static unsigned int emu_jedec_ce_60_size = 0; +static unsigned int emu_jedec_ce_c7_size = 0; #endif #endif -static int spi_write_256_chunksize = 256; +static unsigned int spi_write_256_chunksize = 256; static int dummy_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); static int dummy_spi_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len); + unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_dummyflasher = { .type = SPI_CONTROLLER_DUMMY, @@ -320,8 +320,8 @@ static int emulate_spi_chip_response(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { - int offs; - static int aai_offs; + unsigned int offs; + static int unsigned aai_offs; static int aai_active = 0; if (writecnt == 0) { @@ -549,7 +549,7 @@ } static int dummy_spi_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len) + unsigned int start, unsigned int len) { return spi_write_chunked(flash, buf, start, len, spi_write_256_chunksize); Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/flash.h Wed Nov 23 10:13:48 2011 (r1470) @@ -108,9 +108,9 @@ uint32_t model_id; /* Total chip size in kilobytes */ - int total_size; + unsigned int total_size; /* Chip page size in bytes */ - int page_size; + unsigned int page_size; int feature_bits; /* @@ -121,8 +121,10 @@ int (*probe) (struct flashchip *flash); - /* Delay after "enter/exit ID mode" commands in microseconds. */ - int probe_timing; + /* Delay after "enter/exit ID mode" commands in microseconds. + * NB: negative values have special meanings, see TIMING_* below. + */ + signed int probe_timing; /* * Erase blocks and associated erase function. Any chip erase function @@ -143,8 +145,8 @@ int (*printlock) (struct flashchip *flash); int (*unlock) (struct flashchip *flash); - int (*write) (struct flashchip *flash, uint8_t *buf, int start, int len); - int (*read) (struct flashchip *flash, uint8_t *buf, int start, int len); + int (*write) (struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); + int (*read) (struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); struct { uint16_t min; uint16_t max; @@ -202,7 +204,7 @@ extern const char flashrom_version[]; extern char *chip_to_probe; void map_flash_registers(struct flashchip *flash); -int read_memmapped(struct flashchip *flash, uint8_t *buf, int start, int len); +int read_memmapped(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); int erase_flash(struct flashchip *flash); int probe_flash(int startchip, struct flashchip *fill_flash, int force); int read_flash_to_file(struct flashchip *flash, const char *filename); @@ -210,8 +212,8 @@ int max(int a, int b); void tolower_string(char *str); char *extract_param(char **haystack, const char *needle, const char *delim); -int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, const char *message); -int need_erase(uint8_t *have, uint8_t *want, int len, enum write_granularity gran); +int verify_range(struct flashchip *flash, uint8_t *cmpbuf, unsigned int start, unsigned int len, const char *message); +int need_erase(uint8_t *have, uint8_t *want, unsigned int len, enum write_granularity gran); char *strcat_realloc(char *dest, const char *src); void print_version(void); void print_banner(void); Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/flashrom.c Wed Nov 23 10:13:48 2011 (r1470) @@ -412,7 +412,7 @@ flash->virtual_registers = (chipaddr)programmer_map_flash_region("flash chip registers", (0xFFFFFFFF - 0x400000 - size + 1), size); } -int read_memmapped(struct flashchip *flash, uint8_t *buf, int start, int len) +int read_memmapped(struct flashchip *flash, uint8_t *buf, unsigned int start, int unsigned len) { chip_readn(buf, flash->virtual_memory + start, len); @@ -535,7 +535,7 @@ } /* start is an offset to the base address of the flash chip */ -int check_erased_range(struct flashchip *flash, int start, int len) +int check_erased_range(struct flashchip *flash, unsigned int start, unsigned int len) { int ret; uint8_t *cmpbuf = malloc(len); @@ -558,10 +558,10 @@ * @message string to print in the "FAILED" message * @return 0 for success, -1 for failure */ -int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, +int verify_range(struct flashchip *flash, uint8_t *cmpbuf, unsigned int start, unsigned int len, const char *message) { - int i; + unsigned int i; uint8_t *readbuf = malloc(len); int ret = 0, failcount = 0; @@ -639,10 +639,10 @@ * @gran write granularity (enum, not count) * @return 0 if no erase is needed, 1 otherwise */ -int need_erase(uint8_t *have, uint8_t *want, int len, enum write_granularity gran) +int need_erase(uint8_t *have, uint8_t *want, unsigned int len, enum write_granularity gran) { int result = 0; - int i, j, limit; + unsigned int i, j, limit; switch (gran) { case write_gran_1bit: @@ -705,11 +705,13 @@ * in relation to the max write length of the programmer and the max write * length of the chip. */ -static int get_next_write(uint8_t *have, uint8_t *want, int len, - int *first_start, enum write_granularity gran) -{ - int need_write = 0, rel_start = 0, first_len = 0; - int i, limit, stride; +static unsigned int get_next_write(uint8_t *have, uint8_t *want, unsigned int len, + unsigned int *first_start, + enum write_granularity gran) +{ + int need_write = 0; + unsigned int rel_start = 0, first_len = 0; + unsigned int i, limit, stride; switch (gran) { case write_gran_1bit: @@ -1030,7 +1032,7 @@ int verify_flash(struct flashchip *flash, uint8_t *buf) { int ret; - int total_size = flash->total_size * 1024; + unsigned int total_size = flash->total_size * 1024; msg_cinfo("Verifying flash... "); @@ -1208,7 +1210,8 @@ unsigned int addr, unsigned int len)) { - int starthere = 0, lenhere = 0, ret = 0, skip = 1, writecount = 0; + unsigned int starthere = 0, lenhere = 0; + int ret = 0, skip = 1, writecount = 0; enum write_granularity gran = write_gran_256bytes; /* FIXME */ /* curcontents and newcontents are opaque to walk_eraseregions, and Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/ichspi.c Wed Nov 23 10:13:48 2011 (r1470) @@ -1278,7 +1278,8 @@ return 0; } -int ich_hwseq_read(struct flashchip *flash, uint8_t *buf, int addr, int len) +int ich_hwseq_read(struct flashchip *flash, uint8_t *buf, unsigned int addr, + unsigned int len) { uint16_t hsfc; uint16_t timeout = 100 * 60; @@ -1315,7 +1316,8 @@ return 0; } -int ich_hwseq_write(struct flashchip *flash, uint8_t *buf, int addr, int len) +int ich_hwseq_write(struct flashchip *flash, uint8_t *buf, unsigned int addr, + unsigned int len) { uint16_t hsfc; uint16_t timeout = 100 * 60; Modified: trunk/it87spi.c ============================================================================== --- trunk/it87spi.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/it87spi.c Wed Nov 23 10:13:48 2011 (r1470) @@ -106,9 +106,9 @@ static int it8716f_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); static int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, - int start, int len); + unsigned int start, unsigned int len); static int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len); + unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_it87xx = { .type = SPI_CONTROLLER_IT87XX, @@ -313,9 +313,10 @@ /* Page size is usually 256 bytes */ static int it8716f_spi_page_program(struct flashchip *flash, uint8_t *buf, - int start) + unsigned int start) { - int i, result; + unsigned int i; + int result; chipaddr bios = flash->virtual_memory; result = spi_write_enable(); @@ -340,7 +341,7 @@ * Need to read this big flash using firmware cycles 3 byte at a time. */ static int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, - int start, int len) + unsigned int start, unsigned int len) { fast_spi = 0; @@ -358,7 +359,7 @@ } static int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len) + unsigned int start, unsigned int len) { /* * IT8716F only allows maximum of 512 kb SPI chip size for memory @@ -374,7 +375,7 @@ (flash->page_size > 256)) { spi_chip_write_1(flash, buf, start, len); } else { - int lenhere; + unsigned int lenhere; if (start % flash->page_size) { /* start to the end of the page or to start + len, Modified: trunk/jedec.c ============================================================================== --- trunk/jedec.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/jedec.c Wed Nov 23 10:13:48 2011 (r1470) @@ -91,7 +91,7 @@ msg_cdbg("%s: excessive loops, i=0x%x\n", __func__, i); } -static int getaddrmask(struct flashchip *flash) +static unsigned int getaddrmask(struct flashchip *flash) { switch (flash->feature_bits & FEATURE_ADDR_MASK) { case FEATURE_ADDR_FULL: @@ -355,12 +355,12 @@ } /* chunksize is 1 */ -int write_jedec_1(struct flashchip *flash, uint8_t *src, int start, int len) +int write_jedec_1(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) { int i, failed = 0; chipaddr dst = flash->virtual_memory + start; chipaddr olddst; - int mask; + unsigned int mask; mask = getaddrmask(flash); @@ -376,14 +376,14 @@ return failed; } -int write_page_write_jedec_common(struct flashchip *flash, uint8_t *src, int start, int page_size) +int write_page_write_jedec_common(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int page_size) { int i, tried = 0, failed; uint8_t *s = src; chipaddr bios = flash->virtual_memory; chipaddr dst = bios + start; chipaddr d = dst; - int mask; + unsigned int mask; mask = getaddrmask(flash); @@ -424,15 +424,15 @@ * This function is a slightly modified copy of spi_write_chunked. * Each page is written separately in chunks with a maximum size of chunksize. */ -int write_jedec(struct flashchip *flash, uint8_t *buf, int start, int len) +int write_jedec(struct flashchip *flash, uint8_t *buf, unsigned int start, int unsigned len) { - int i, starthere, lenhere; + unsigned int i, starthere, lenhere; /* FIXME: page_size is the wrong variable. We need max_writechunk_size * in struct flashchip to do this properly. All chips using * write_jedec have page_size set to max_writechunk_size, so * we're OK for now. */ - int page_size = flash->page_size; + unsigned int page_size = flash->page_size; /* Warning: This loop has a very unusual condition and body. * The loop needs to go through each page with at least one affected @@ -461,7 +461,7 @@ int erase_chip_block_jedec(struct flashchip *flash, unsigned int addr, unsigned int blocksize) { - int mask; + unsigned int mask; mask = getaddrmask(flash); if ((addr != 0) || (blocksize != flash->total_size * 1024)) { @@ -474,7 +474,7 @@ int probe_jedec(struct flashchip *flash) { - int mask; + unsigned int mask; mask = getaddrmask(flash); return probe_jedec_common(flash, mask); @@ -482,7 +482,7 @@ int erase_sector_jedec(struct flashchip *flash, unsigned int page, unsigned int size) { - int mask; + unsigned int mask; mask = getaddrmask(flash); return erase_sector_jedec_common(flash, page, size, mask); @@ -490,7 +490,7 @@ int erase_block_jedec(struct flashchip *flash, unsigned int page, unsigned int size) { - int mask; + unsigned int mask; mask = getaddrmask(flash); return erase_block_jedec_common(flash, page, size, mask); @@ -498,7 +498,7 @@ int erase_chip_jedec(struct flashchip *flash) { - int mask; + unsigned int mask; mask = getaddrmask(flash); return erase_chip_jedec_common(flash, mask); Modified: trunk/linux_spi.c ============================================================================== --- trunk/linux_spi.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/linux_spi.c Wed Nov 23 10:13:48 2011 (r1470) @@ -36,10 +36,10 @@ static int linux_spi_shutdown(void *data); static int linux_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *txbuf, unsigned char *rxbuf); -static int linux_spi_read(struct flashchip *flash, uint8_t *buf, int start, - int len); +static int linux_spi_read(struct flashchip *flash, uint8_t *buf, + unsigned int start, unsigned int len); static int linux_spi_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len); + unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_linux = { .type = SPI_CONTROLLER_LINUX, @@ -131,14 +131,14 @@ return 0; } -static int linux_spi_read(struct flashchip *flash, uint8_t *buf, int start, - int len) +static int linux_spi_read(struct flashchip *flash, uint8_t *buf, + unsigned int start, unsigned int len) { - return spi_read_chunked(flash, buf, start, len, getpagesize()); + return spi_read_chunked(flash, buf, start, len, (unsigned)getpagesize()); } static int linux_spi_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len) + unsigned int start, unsigned int len) { - return spi_write_chunked(flash, buf, start, len, getpagesize() - 4); + return spi_write_chunked(flash, buf, start, len, ((unsigned)getpagesize()) - 4); } Modified: trunk/m29f400bt.c ============================================================================== --- trunk/m29f400bt.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/m29f400bt.c Wed Nov 23 10:13:48 2011 (r1470) @@ -28,7 +28,7 @@ functions. */ /* chunksize is 1 */ -int write_m29f400bt(struct flashchip *flash, uint8_t *src, int start, int len) +int write_m29f400bt(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) { int i; chipaddr bios = flash->virtual_memory; Modified: trunk/opaque.c ============================================================================== --- trunk/opaque.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/opaque.c Wed Nov 23 10:13:48 2011 (r1470) @@ -53,7 +53,7 @@ return opaque_programmer->probe(flash); } -int read_opaque(struct flashchip *flash, uint8_t *buf, int start, int len) +int read_opaque(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { if (!opaque_programmer->read) { msg_perr("%s called before register_opaque_programmer. " @@ -64,7 +64,7 @@ return opaque_programmer->read(flash, buf, start, len); } -int write_opaque(struct flashchip *flash, uint8_t *buf, int start, int len) +int write_opaque(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { if (!opaque_programmer->write) { msg_perr("%s called before register_opaque_programmer. " Modified: trunk/pm49fl00x.c ============================================================================== --- trunk/pm49fl00x.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/pm49fl00x.c Wed Nov 23 10:13:48 2011 (r1470) @@ -22,10 +22,10 @@ #include "flash.h" -static void write_lockbits_49fl00x(chipaddr bios, int size, - unsigned char bits, int block_size) +static void write_lockbits_49fl00x(chipaddr bios, unsigned int size, + unsigned char bits, unsigned int block_size) { - int i, left = size; + unsigned int i, left = size; for (i = 0; left >= block_size; i++, left -= block_size) { /* pm49fl002 */ Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/programmer.h Wed Nov 23 10:13:48 2011 (r1470) @@ -563,23 +563,23 @@ #define MAX_DATA_WRITE_UNLIMITED 256 struct spi_programmer { enum spi_controller type; - int max_data_read; - int max_data_write; + unsigned int max_data_read; + unsigned int max_data_write; int (*command)(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int (*multicommand)(struct spi_command *cmds); /* Optimized functions for this programmer */ - int (*read)(struct flashchip *flash, uint8_t *buf, int start, int len); - int (*write_256)(struct flashchip *flash, uint8_t *buf, int start, int len); + int (*read)(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); + int (*write_256)(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); }; extern const struct spi_programmer *spi_programmer; int default_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int default_spi_send_multicommand(struct spi_command *cmds); -int default_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); -int default_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len); +int default_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int default_spi_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); void register_spi_programmer(const struct spi_programmer *programmer); /* ichspi.c */ @@ -625,8 +625,8 @@ int max_data_write; /* Specific functions for this programmer */ int (*probe) (struct flashchip *flash); - int (*read) (struct flashchip *flash, uint8_t *buf, int start, int len); - int (*write) (struct flashchip *flash, uint8_t *buf, int start, int len); + int (*read) (struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); + int (*write) (struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); int (*erase) (struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); }; extern const struct opaque_programmer *opaque_programmer; Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/serprog.c Wed Nov 23 10:13:48 2011 (r1470) @@ -302,8 +302,8 @@ static int serprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); -static int serprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, - int len); +static int serprog_spi_read(struct flashchip *flash, uint8_t *buf, + unsigned int start, unsigned int len); static struct spi_programmer spi_programmer_serprog = { .type = SPI_CONTROLLER_SERPROG, .max_data_read = MAX_DATA_READ_UNLIMITED, @@ -822,11 +822,10 @@ * the advantage that it is much faster for most chips, but breaks those with * non-contiguous address space (like AT45DB161D). When spi_read_chunked is * fixed this method can be removed. */ -static int serprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +static int serprog_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { - int i; - int cur_len; - const int max_read = spi_programmer_serprog.max_data_read; + unsigned int i, cur_len; + const unsigned int max_read = spi_programmer_serprog.max_data_read; for (i = 0; i < len; i += cur_len) { int ret; cur_len = min(max_read, (len - i)); Modified: trunk/spi.c ============================================================================== --- trunk/spi.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/spi.c Wed Nov 23 10:13:48 2011 (r1470) @@ -97,9 +97,9 @@ return result; } -int default_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +int default_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { - int max_data = spi_programmer->max_data_read; + unsigned int max_data = spi_programmer->max_data_read; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI read chunk size not defined " "on this hardware. Please report a bug at " @@ -109,9 +109,9 @@ return spi_read_chunked(flash, buf, start, len, max_data); } -int default_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len) +int default_spi_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { - int max_data = spi_programmer->max_data_write; + unsigned int max_data = spi_programmer->max_data_write; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI write chunk size not defined " "on this hardware. Please report a bug at " @@ -121,9 +121,9 @@ return spi_write_chunked(flash, buf, start, len, max_data); } -int spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len) +int spi_chip_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { - int addrbase = 0; + unsigned int addrbase = 0; if (!spi_programmer->read) { msg_perr("%s called, but SPI read is unsupported on this " "hardware. Please report a bug at " @@ -160,7 +160,7 @@ * .write_256 = spi_chip_write_1 */ /* real chunksize is up to 256, logical chunksize is 256 */ -int spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, int len) +int spi_chip_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { if (!spi_programmer->write_256) { msg_perr("%s called, but SPI page write is unsupported on this " Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/spi25.c Wed Nov 23 10:13:48 2011 (r1470) @@ -840,7 +840,7 @@ return ret; } -int spi_byte_program(int addr, uint8_t databyte) +int spi_byte_program(unsigned int addr, uint8_t databyte) { int result; struct spi_command cmds[] = { @@ -875,7 +875,7 @@ return result; } -int spi_nbyte_program(int addr, uint8_t *bytes, int len) +int spi_nbyte_program(unsigned int addr, uint8_t *bytes, unsigned int len) { int result; /* FIXME: Switch to malloc based on len unless that kills speed. */ @@ -950,7 +950,7 @@ return 0; } -int spi_nbyte_read(int address, uint8_t *bytes, int len) +int spi_nbyte_read(unsigned int address, uint8_t *bytes, unsigned int len) { const unsigned char cmd[JEDEC_READ_OUTSIZE] = { JEDEC_READ, @@ -968,12 +968,11 @@ * FIXME: Use the chunk code from Michael Karcher instead. * Each page is read separately in chunks with a maximum size of chunksize. */ -int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize) +int spi_read_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize) { int rc = 0; - int i, j, starthere, lenhere; - int page_size = flash->page_size; - int toread; + unsigned int i, j, starthere, lenhere, toread; + unsigned int page_size = flash->page_size; /* Warning: This loop has a very unusual condition and body. * The loop needs to go through each page with at least one affected @@ -1008,17 +1007,16 @@ * FIXME: Use the chunk code from Michael Karcher instead. * Each page is written separately in chunks with a maximum size of chunksize. */ -int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize) +int spi_write_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize) { int rc = 0; - int i, j, starthere, lenhere; + unsigned int i, j, starthere, lenhere, towrite; /* FIXME: page_size is the wrong variable. We need max_writechunk_size * in struct flashchip to do this properly. All chips using * spi_chip_write_256 have page_size set to max_writechunk_size, so * we're OK for now. */ - int page_size = flash->page_size; - int towrite; + unsigned int page_size = flash->page_size; /* Warning: This loop has a very unusual condition and body. * The loop needs to go through each page with at least one affected @@ -1057,9 +1055,10 @@ * (e.g. due to size constraints in IT87* for over 512 kB) */ /* real chunksize is 1, logical chunksize is 1 */ -int spi_chip_write_1(struct flashchip *flash, uint8_t *buf, int start, int len) +int spi_chip_write_1(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { - int i, result = 0; + unsigned int i; + int result = 0; for (i = start; i < start + len; i++) { result = spi_byte_program(i, buf[i - start]); @@ -1072,7 +1071,7 @@ return 0; } -int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len) +int spi_aai_write(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { uint32_t pos = start; int result; Modified: trunk/sst28sf040.c ============================================================================== --- trunk/sst28sf040.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/sst28sf040.c Wed Nov 23 10:13:48 2011 (r1470) @@ -76,7 +76,7 @@ } /* chunksize is 1 */ -int write_28sf040(struct flashchip *flash, uint8_t *src, int start, int len) +int write_28sf040(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) { int i; chipaddr bios = flash->virtual_memory; Modified: trunk/sst49lfxxxc.c ============================================================================== --- trunk/sst49lfxxxc.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/sst49lfxxxc.c Wed Nov 23 10:13:48 2011 (r1470) @@ -35,7 +35,7 @@ static int write_lockbits_49lfxxxc(struct flashchip *flash, unsigned char bits) { chipaddr registers = flash->virtual_registers; - int i, left = flash->total_size * 1024; + unsigned int i, left = flash->total_size * 1024; unsigned long address; msg_cdbg("\nbios=0x%08lx\n", registers); Modified: trunk/w39.c ============================================================================== --- trunk/w39.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/w39.c Wed Nov 23 10:13:48 2011 (r1470) @@ -21,7 +21,7 @@ #include "flash.h" -static int printlock_w39_fwh_block(struct flashchip *flash, int offset) +static int printlock_w39_fwh_block(struct flashchip *flash, unsigned int offset) { chipaddr wrprotect = flash->virtual_registers + offset + 2; uint8_t locking; @@ -59,7 +59,7 @@ return (locking & ((1 << 2) | (1 << 0))) ? -1 : 0; } -static int unlock_w39_fwh_block(struct flashchip *flash, int offset) +static int unlock_w39_fwh_block(struct flashchip *flash, unsigned int offset) { chipaddr wrprotect = flash->virtual_registers + offset + 2; uint8_t locking; @@ -80,7 +80,7 @@ return 0; } -static uint8_t w39_idmode_readb(struct flashchip *flash, int offset) +static uint8_t w39_idmode_readb(struct flashchip *flash, unsigned int offset) { chipaddr bios = flash->virtual_memory; uint8_t val; @@ -127,7 +127,7 @@ return 0; } -static int printlock_w39_common(struct flashchip *flash, int offset) +static int printlock_w39_common(struct flashchip *flash, unsigned int offset) { uint8_t lock; @@ -138,7 +138,7 @@ static int printlock_w39_fwh(struct flashchip *flash) { - int i, total_size = flash->total_size * 1024; + unsigned int i, total_size = flash->total_size * 1024; int ret = 0; /* Print lock status of the complete chip */ @@ -150,7 +150,7 @@ static int unlock_w39_fwh(struct flashchip *flash) { - int i, total_size = flash->total_size * 1024; + unsigned int i, total_size = flash->total_size * 1024; /* Unlock the complete chip */ for (i = 0; i < total_size; i += flash->page_size) Modified: trunk/wbsio_spi.c ============================================================================== --- trunk/wbsio_spi.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/wbsio_spi.c Wed Nov 23 10:13:48 2011 (r1470) @@ -62,7 +62,7 @@ static int wbsio_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); -static int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); +static int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_wbsio = { .type = SPI_CONTROLLER_WBSIO, @@ -194,7 +194,7 @@ return 0; } -static int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +static int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { return read_memmapped(flash, buf, start, len); }

1 0

Re: [flashrom] flashrom v0.9.4-r1467 + SUPERMICOR X9SCL
by Stefan Tauner 22 Nov '11

22 Nov '11

On Tue, 15 Nov 2011 16:42:20 +0100 "Panny, Martin" <mp(a)rnt.de> wrote: > 0x5C: 0x03ff0030 (FREG2: Management Engine) > 0x00030000-0x003fffff is locked Hello Martin, thanks for your report! The problem is the locked ME region as quoted above. We are working on unlocking it, but intel does not provide us any documentation so please do not expect a solution soon. I have added the board to our list of (un)supported boards (with an appropriate note) and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] ASUS P5PE-VM
by Stefan Tauner 22 Nov '11

22 Nov '11

On Sat, 19 Nov 2011 12:18:11 -0200 Marcos Felipe Rasia de Mello <marcosfrm(a)gmail.com> wrote: > ASUS P5PE-VM success report. > > http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/ > > Logs attached. > > Marcos Hello Marcos, thanks for your report! I have marked the flash chip (W39V040FC) as fully tested and will commit that later together with other small changes. The mainboard was already known to work (since the board enable was added in r1100). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Asus M3N78-EM: flashrom -V
by anders.arpteg＠gmail.com 22 Nov '11

22 Nov '11

flashrom v0.9.4-r1394 on Linux 3.0.0-13-generic (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1247M loops per second, 10 myus = 10 us, 100 myus = 104 us, 1000 myus = 1013 us, 10000 myus = 10045 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M3N78-EM" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8712 on port 0x2e Found chipset "NVIDIA MCP78S" with PCI ID 10de:075c. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:0752 at 00:01:1 MCP SPI BAR is at 0xfce80000 Mapping NVIDIA MCP6x SPI at 0xfce80000, unaligned size 0x544. SPI control is 0xc012, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: SPI. Super I/O ID 0x8712 is not on the list of flash capable controllers. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25LF040A.RES, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Chip status register is 00 Found Winbond flash chip "W25X80" (1024 kB, SPI) at physical address 0xfff00000. Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x13 No operations were specified.

1 0

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Joshua Roys 19 Nov '11

19 Nov '11

On 11/17/2011 04:24 PM, Svante Olofsson wrote: > Hi, Hello again. Very sorry- today is not my day. Off by one bug. Please change 13 to 12. Thanks, Josh

3 2

[commit] r1469 - trunk
by repository service 19 Nov '11

19 Nov '11

Author: stefanct Date: Sat Nov 19 20:31:17 2011 New Revision: 1469 URL: http://flashrom.org/trac/flashrom/changeset/1469 Log: Add board enable for ASUS A7N8X-VM/400 http://www.flashrom.org/pipermail/flashrom/2011-November/008274.html Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Wed Nov 16 23:08:11 2011 (r1468) +++ trunk/board_enable.c Sat Nov 19 20:31:17 2011 (r1469) @@ -2008,6 +2008,15 @@ /* * Suited for: + * - ASUS A7N8X-VM/400: NVIDIA nForce2 IGP2 + IT8712F + */ +static int it8712f_gpio12_raise(void) +{ + return it87_gpio_set(12, 1); +} + +/* + * Suited for: * - ASUS A7V600-X: VIA KT600 + VT8237 + IT8712F * - ASUS A7V8X-X: VIA KT400 + VT8235 + IT8712F */ @@ -2094,6 +2103,7 @@ {0x1039, 0x0741, 0x1849, 0x0741, 0x1039, 0x5513, 0x1849, 0x5513, "^K7S41GX$", NULL, NULL, P3, "ASRock", "K7S41GX", 0, OK, w836xx_memw_enable_2e}, {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, NULL, P3, "ASRock", "P4i65GV", 0, OK, intel_ich_gpio23_raise}, {0x8086, 0x2570, 0x1849, 0x2570, 0x8086, 0x24d3, 0x1849, 0x24d0, NULL, NULL, NULL, P3, "ASRock", "775i65G", 0, OK, intel_ich_gpio23_raise}, + {0x10DE, 0x0060, 0x1043, 0x80AD, 0x10DE, 0x01E0, 0x1043, 0x80C0, NULL, NULL, NULL, P3, "ASUS", "A7N8X-VM/400", 0, OK, it8712f_gpio12_raise}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, NULL, P3, "ASUS", "A7V600-X", 0, OK, it8712f_gpio31_raise}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, NULL, P3, "ASUS", "A7V8X-MX SE", 0, OK, w836xx_memw_enable_2e}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, NULL, P3, "ASUS", "A7V8X", 0, OK, it8703f_gpio51_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Wed Nov 16 23:08:11 2011 (r1468) +++ trunk/print.c Sat Nov 19 20:31:17 2011 (r1469) @@ -571,6 +571,7 @@ B("ASRock", "P4i65GV", 1, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL), B("ASUS", "A7N8X Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=wAsRYm41KTp78MFC", NULL), B("ASUS", "A7N8X-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=TmQtPJv4jIxmL9C2", NULL), + B("ASUS", "A7N8X-VM/400", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL), B("ASUS", "A7V133", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL), B("ASUS", "A7V333", 1, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL), B("ASUS", "A7V400-MX", 1, "http://www.asus.com/product.aspx?P_ID=hORgEHRBDLMfwAwx", NULL),

1 0

ASUS P5PE-VM
by Marcos Felipe Rasia de Mello 19 Nov '11

19 Nov '11

ASUS P5PE-VM success report. http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/ Logs attached. Marcos

1 0

LiveCD
by Dan King 18 Nov '11

18 Nov '11

I tried to download the live cd and just wanted to let you guys know that only the MegaUpload link works all the rest have been taken down

2 1

Re: [flashrom] [patch] serprog: add proper serprog_map
by Urja Rannikko 18 Nov '11

18 Nov '11

Add serprog_map so that chips are addressed properly. I did this for adding LPC support to my ATmega644 programmer. Signed-off-by: Urja Rannikko <urjaman(a)gmail.com> ----- That previous one was clearly too verbose, noticed it when I ran this without any -V. I put those messages down one level of verbosity. -- Urja Rannikko

1 0

[patch] serprog: add proper serprog_map
by Urja Rannikko 18 Nov '11

18 Nov '11

Add serprog_map so that chips are addressed properly. I did this for adding LPC support to my ATmega644 programmer. Signed-off-by: Urja Rannikko <urjaman(a)gmail.com> ------ Sorry if I interrupted you all out of nowhere :P, I was porting LPC code somebody (Mike Stirling, had to look that up) did for the AVR to my ATmega644 (FTDI-USB) programmer, and noticed that it forced a base address of 0xFFF80000 that is right only for 512K chips. I modified the code to only add the highest 8 bits that are not addressable in serprog protocol, and added this map function to have flashrom address stuff properly. This shouldnt affect non-serprog code at all, and it shouldnt matter to parallel, nor it would affect the lpc addr or 0xFFF80000-implementation, also my SPI W25Q80 doesnt mind being addressed in this way at all (detect and read tested). Further testing is recommended. Also sidenote: it might be useful to add an optional write_jedec_1-implementation into serprog. This thing is taking forever to write LPC. (LPC with a 12Mhz AVR isnt that fast anyways, but with USB ping-pong on every byte written...) -- Urja Rannikko

1 0

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Svante Olofsson 18 Nov '11

18 Nov '11

Hi Joshua, Thank you very much for the help! I can now verify that the patch works, the bios is updated and the system boots ;) Best regards, --Svante

1 0

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Joshua Roys 17 Nov '11

17 Nov '11

On 11/17/2011 02:12 PM, Svante Olofsson wrote: > Hi Joshua, > Hello again, Sent the last email a little too quickly. Ignore the 2nd patch in that email also (if you decide to use svn). I tried to fix a non-existent bug! Thanks, Josh

2 1

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Joshua Roys 17 Nov '11

17 Nov '11

On 11/17/2011 02:12 PM, Svante Olofsson wrote: > Hi Joshua, > > I couldn't get the patch to compile (had also, strangely, to manually > edit one part of the patch) > Hello, Sorry- you'll need to apply that patch to the SVN version of flashrom. My patches depend on a fairly recent change. Alternatively, if you want to avoid checking out the svn copy, change: return it8712f_gpio_set(3, 1); to return it8712f_gpio_set(13, 1); Otherwise, apply these 2 patches to svn (and ignore the previous patch). Thanks, Josh

2 1

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Joshua Roys 17 Nov '11

17 Nov '11

On 11/17/2011 11:53 AM, Svante Olofsson wrote: > I have attached the information.... > > I guess that I haven't changed the rom at all if the protection is in > place :) The protection must be lifted programatically right? Nothing > can be done with parameters in the bios setup? > > BR, > --Svante > Please try the attached patch and reply with the output from `flashrom -Vw ...' Thanks, Josh

2 1

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Joshua Roys 17 Nov '11

17 Nov '11

On 11/17/2011 11:23 AM, Svante Olofsson wrote: > I tried to write the backup.rom with flashrom -V -w backup.rom and that > seemed to work even if the rom was identical to the one already present. > To me everything looks quite good and I am considering writing the new > rom that I downloaded. What do you thing? Do you still want me to post > any more information with lspci -xxnnvvv, flashrom -V and superiotool > -deV ? > Yes, please send that information. The old version of flashrom failed because of a write protection that is in place on your system. As Stefan mentioned, newer flashrom versions will not write blocks that don't need to be written. See below: > Reading old flash chip contents... done. > Erasing and writing flash chip... Trying erase function 0... > 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, [...] > 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S > Erase/write done. > Verifying flash... VERIFIED. > Restoring PCI config space for 00:01:0 reg 0x6d > Restoring PCI config space for 00:01:0 reg 0x92 > The ":S" after the address ranges indicate that flashrom skipped that section. Thanks, Josh p.s. please use `lspci -vvvnnxxx' (as root) with 3 x's. Thanks.

2 1

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Stefan Tauner 17 Nov '11

17 Nov '11

On Thu, 17 Nov 2011 14:58:23 +0200 Svante Olofsson <svante(a)fyraess.com> wrote: > Hi, > > I tried to flash an A7N8X-VM400 board with the current bios (got it with > flashrom -r). The current bios rom was of identical size as the downloaded > newer bios rom. I figured it would be safest to try to flash with the old > one :) hello by "old one" you mean the backed up rom contents i guess? well in newer versions of flashrom this would lead to a complete skipped write because it checks for equal content on the chip before erasing anything ;) what is more of a problem is the *old* version of flashrom you have used, as you have seen... > > The information below is copied from the terminal: > > svante@stereo:~$ sudo flashrom -wV current_A7NVM400-ASUS.080009.rom > flashrom v0.9.1-r946 > […] > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... Erasing flash chip... Looking at blockwise erase > function 0... trying... 0x000000-0x000fff, ERASE FAILED at 0x00000008! > Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x00000fff: > 0xfdc > ERASE FAILED! > > Looking at blockwise erase function 1... trying... 0x000000-0x00ffff, ERASE > FAILED at 0x00000008! Expected=0xff, Read=0x4c, failed byte count from > 0x00000000-0x0000ffff: 0xfed5 > ERASE FAILED! > > Looking at blockwise erase function 2... trying... 0x000000-0x07ffff, ERASE > FAILED at 0x00000008! Expected=0xff, Read=0x4c, failed byte count from > 0x00000000-0x0007ffff: 0x687be > ERASE FAILED! this looks like a complete write protection, which is quite common... see http://flashrom.org/Board_Enable for details. > > what do you think, am I screwed? not at all, but we will probably need to add some code to enable writing on your board. first of all please get a current version of flashrom from subversion and compile it. http://flashrom.org/Downloads then verify that the rom content is still the same as the backed up image (e.g. flashrom -v backup.rom). then reply with the logs of the following commands (run as root) attached/embedded: lspci -xxnnvvv flashrom -V if possible also superiotool -deV you can of course also try to reverse engineer the needed code yourself as described here: http://flashrom.org/Finding_Board_Enable_by_Reverse_Engineering if you wait for us to do it it can take its time... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom November 2011