flashrom September 2010

flashrom@flashrom.org

68 participants
216 discussions

[PATCH] Board enable for MSI MS-6163 (MS-6163 Pro/BX Master)
by Mattias Mattsson 05 Oct '10

05 Oct '10

Tested on an MS-6163 Pro. This board has the same DMI-string and board enable as the "BX Master". (Confirmed by downloading and taking apart the vendor BIOS.) lspci output: http://www.flashrom.org/pipermail/flashrom/2010-August/004461.html Thanks, -mattias

2 1

Re: [flashrom] [PATCH] RayeR speedups, variable port
by RayeR 05 Oct '10

05 Oct '10

Hi, I did some speed test on 4MB SPI flash: read: spipgm 2:41 flashrom 2:44 erase spipgm 0:21 flashrom 3:34 So you can see the read speed has improved :) Martin > > Great. Please note that the parameter changed from > > -p rayer_bitbang_spi > > to > > -p rayer_spi > > because the short form is faster to type, and users do not care at all > > about bitbanging.

3 4

Fwd: flashrom on Intel Nics,
by Idwer Vollering 05 Oct '10

05 Oct '10

---------- Forwarded message ---------- From: Iain <selsinork(a)gmail.com> Date: 2010/9/29 Subject: flashrom on Intel Nics, To: Idwer Vollering <vidwer(a)gmail.com> Hi, So I have a couple of other intel nics that I've been trying with your flashrom driver, if you're interested in the results... root@p7fe-64:~/flashrom# ./flashrom -p nicintel_spi -VV flashrom v0.9.2-r1182 on Linux 2.6.35-dt (x86_64), built with libpci 3.1.4, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1785M loops per second, 10 myus = 10 us, 100 myus = 107 us, 1000 myus = 1019 us, 10000 myus = 10032 us, 4 myus = 4 us, OK. Initializing nicintel_spi programmer Found "Intel 82540EM Gigabit Ethernet Controller" (8086:100e, BDF 06:01.0). Requested BAR is MEM, 32bit, not prefetchable Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L05PT, 64 KB: and it hangs there seemingly indefinately, or at least 10mins which is as long as I've been bothered to wait.. The card has an Atmel 25F1024N which I gather from the flashrom source probably isn't supported as it may not have a device id, but the hang was unexpected. root@p7fe-64:~/flashrom# ./flashrom -p nicintel_spi:pci=01:00.0 -VV flashrom v0.9.2-r1182 on Linux 2.6.35-dt (x86_64), built with libpci 3.1.4, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1785M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1019 us, 10000 myus = 10023 us, 4 myus = 4 us, OK. Initializing nicintel_spi programmer Found "Intel 82571EB Gigabit Ethernet Controller" (8086:105e, BDF 01:00.0). Requested BAR is MEM, 32bit, not prefetchable Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L05PT, 64 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L05PU, 64 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L10PT, 128 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L10PU, 128 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L20PT, 256 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L20PU, 256 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L40PT, 512 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L40PU, 512 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L80P, 1024 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L16PT, 2048 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L16PU, 2048 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L512, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L010, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L020, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L040, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L080, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L016, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L032, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25LQ032, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A29002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF081A, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DQ161, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25F512B, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25FS010, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25FS040, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26DF041, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26F004, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT29C512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Bright BM29F040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for EMST F25L008A, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B05, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B05T, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B10, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B10T, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B20T, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B40T, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B80T, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B16T, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B32T, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B64T, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25D16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F05, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F10, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN29F010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Hyundai HY29F002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Hyundai HY29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Hyundai HY29F040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F002BC-T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L1005, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L2005, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L4005, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L1635E, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Numonyx M25PE20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Numonyx M25PE40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV010, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV020, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV040, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV512, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for PMC Pm49FL004, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25VF016B, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25VF032B, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25VF064C, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25VF040.REMS, 512 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF040B, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25LF040A.RES, 512 KB: RES returned 0xff 0xff. probe_spi_res2: id1 0xff, id2 0xff Probing for SST SST25VF040B.REMS, 512 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF080B, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST28SF040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P05.RES, 64 KB: RDID returned 0xff 0xff 0xff. REMS returned ff ff. RES returned 0xff. probe_spi_res1: id 0xff Probing for ST M25P10-A, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P10.RES, 128 KB: RDID returned 0xff 0xff 0xff. REMS returned ff ff. RES returned 0xff. probe_spi_res1: id 0xff Probing for ST M25P20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P40-old, 512 KB: RDID returned 0xff 0xff 0xff. REMS returned ff ff. RES returned 0xff. probe_spi_res1: id 0xff Probing for ST M25P80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P128, 16384 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25PX32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25PX64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BB, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080B, 1024 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FW002, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W25Q80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25Q16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25Q32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25Q64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x10, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040/P, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040(F)B, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040(F)C, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W49F002U/N, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W49F020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for AMIC unknown AMIC SPI chip, 0 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel unknown Atmel SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon unknown Eon SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix unknown Macronix SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC unknown PMC SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST unknown SST SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST unknown ST SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Sanyo unknown Sanyo SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Generic unknown SPI chip (RDID), 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Generic unknown SPI chip (REMS), 0 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. So this is a dual port card, not sure which function the spi device would show up under, but the same result on both. It has an Atmel 25F1024AN, so again possibly not something that flashrom can handle anyway, but at least there's no hang this time.. Since this is a newish card I'll have a look and see if I can find one with some different SPI device, would be nice to know it works but is just the 25F1024 that's the problem here. If there's more information I can supply about either of these, or anything you'd like me to test, not a problem, just let me know. Rgds, Iain

3 2

[patch] update README
by Idwer Vollering 05 Oct '10

05 Oct '10

Update README to list al the needed rpm files [1] and update the download location of csdpmi. [1]: http://www.flashrom.org/pipermail/flashrom/2010-May/003116.html --- Index: README =================================================================== --- README (revision 1022) +++ README (working copy) @@ -85,8 +85,8 @@ Get RPMs of the cross compiler from the DJGPP site and install them: djcross-binutils-2.19.1-10ap.i386.rpm - djcross-gcc-tools-4.4.1-1ap.i686.rpm djcross-gcc-4.3.2-8ap.i686.rpm + djcrx-2.04pre_20090725-13ap.i386.rpm Download pciutils 3.1.5 and apply http://assembler.cz/flashrom/pciutils.patch Download and compile http://assembler.cz/flashrom/libgetopt/ Compile pciutils, see README.DJGPP for instructions. @@ -98,7 +98,7 @@ or (above settings hardcoded) make djgpp-dos You might have to add WARNERROR=no to the make command line. - To run flashrom.exe, download http://clio.rice.edu/djgpp/csdpmi7b.zip and + To run flashrom.exe, download http://homer.rice.edu/~sandmann/cwsdpmi/csdpmi7b.zip and make sure CWSDPMI.EXE is in the current directory. Installation

3 4

Success Report Winbond W25x10 on Intel NIC
by Iain 05 Oct '10

05 Oct '10

Was quite interested to see the recently added Intel NIC support since I really dislike ibautil. Disappointed to find it didn't support my NIC though. Anyway, I added the id for my nic and it's able to write to this currently untested Winbond 25x10 as well. Hope the info is useful. Rgds, Iain -- ~/flashrom# ./flashrom -p nicintel_spi flashrom v0.9.2-r1182 on Linux 2.6.35-dt (x86_64), built with libpci 3.1.4, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found "Intel 82572EI Gigabit Ethernet Controller" (8086:10b9, BDF 03:00.0). Found chip "Winbond W25x10" (128 KB, SPI) at physical address 0xfffe0000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. root@p7fe-64:~/flashrom# ./flashrom -p nicintel_spi -Vr org.bin flashrom v0.9.2-r1182 on Linux 2.6.35-dt (x86_64), built with libpci 3.1.4, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1785M loops per second, 10 myus = 10 us, 100 myus = 107 us, 1000 myus = 1019 us, 10000 myus = 100 21 us, 4 myus = 4 us, OK. Initializing nicintel_spi programmer Found "Intel 82572EI Gigabit Ethernet Controller" (8086:10b9, BDF 03:00.0). Requested BAR is MEM, 32bit, not prefetchable Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x10 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x10, id2 0x10 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x10 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Chip status register is 00 Found chip "Winbond W25x10" (128 KB, SPI) at physical address 0xfffe0000. Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xef, id2 0x10 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. # flashrom/flashrom -p nicintel_spi -Vw ipxe.mrom flashrom v0.9.2-r1182 on Linux 2.6.35-dt (x86_64), built with libpci 3.1.4, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1784M loops per second, 10 myus = 10 us, 100 myus = 107 us, 1000 myus = 1026 us, 10000 myus = 100 22 us, 4 myus = 4 us, OK. Initializing nicintel_spi programmer Found "Intel 82572EI Gigabit Ethernet Controller" (8086:10b9, BDF 03:00.0). Requested BAR is MEM, 32bit, not prefetchable Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x10 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x10, id2 0x10 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x10 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Chip status register is 00 Found chip "Winbond W25x10" (128 KB, SPI) at physical address 0xfffe0000. Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xef, id2 0x10 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, 0x001 000-0x001fff, 0x002000-0x002fff, 0x003000-0x003fff, 0x004000-0x004fff, 0x005000-0x005fff, 0x006000-0x006fff, 0x007000-0x007fff, 0x008000-0x008fff, 0x009000 -0x009fff, 0x00a000-0x00afff, 0x00b000-0x00bfff, 0x00c000-0x00cfff, 0x00d000-0x00dfff, 0x00e000-0x00efff, 0x00f000-0x00ffff, 0x010000-0x010fff, 0x011000-0x 011fff, 0x012000-0x012fff, 0x013000-0x013fff, 0x014000-0x014fff, 0x015000-0x015fff, 0x016000-0x016fff, 0x017000-0x017fff, 0x018000-0x018fff, 0x019000-0x019 fff, 0x01a000-0x01afff, 0x01b000-0x01bfff, 0x01c000-0x01cfff, 0x01d000-0x01dfff, 0x01e000-0x01efff, 0x01f000-0x01ffff, SUCCESS. done. Programming flash... done. COMPLETE. Verifying flash... VERIFIED. 03:00.0 Ethernet controller [0200]: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) [8086:10b9] (rev 06) Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter [8086:1083] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at fbbe0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at fbbc0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at bc00 [size=32] Expansion ROM at fbba0000 [disabled] [size=128K] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee00000 Data: 40e1 Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140] Device Serial Number Kernel driver in use: e1000e Kernel modules: e1000e 00: 86 80 b9 10 07 05 10 00 06 00 00 02 08 00 00 00 10: 00 00 be fb 00 00 bc fb 01 bc 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 83 10 30: 00 00 ba fb c8 00 00 00 00 00 00 00 05 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 20 00 21 d0: 05 e0 81 00 00 00 e0 fe 00 00 00 00 e1 40 00 00 e0: 10 00 01 00 c1 0c 00 00 1f 28 1a 00 11 64 03 00 f0: 00 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00

4 8

[PATCH] Make Bus Pirate init more robust, speed up flashing
by Carl-Daniel Hailfinger 04 Oct '10

04 Oct '10

This is a combination of two patches. Patch 1: Thanks to Johannes Sjölund for reporting that the Bus Pirate init could not deal with a Bus Pirate which is already in binary Bitbang mode. This is caused by a combination of the slowness of the Bus Pirate, the slowness of USB and a fast serial port flush routine which just flushes the buffer contents and does not wait until data arrival stops. Make the Bus Pirate init more robust by running the flush command 10 times with 1.5 ms delay in between. This code development was sponsored by Mattias Mattsson. Thanks! Tested a few dozen times, should work reliably. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Patch 2: Thanks to Ian Lesnet for adding a new SPI mode to the Bus Pirate which is specifically designed for flashrom. It has the potential to speed up reads and writes a lot. This patch implements flashrom support for the new SPI mode in a hopefully backward compatible way. Not for merge. The Bus Pirate interface has not been finalized yet, and this patch should help testing if the interface works as designed. No significant speedups expected yet because the code still uses the old small block sizes. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-buspirate_newcommands/buspirate_spi.c =================================================================== --- flashrom-buspirate_newcommands/buspirate_spi.c (Revision 1130) +++ flashrom-buspirate_newcommands/buspirate_spi.c (Arbeitskopie) @@ -22,6 +22,7 @@ #include <string.h> #include <stdlib.h> #include <ctype.h> +#include <unistd.h> #include "flash.h" #include "chipdrivers.h" #include "programmer.h" @@ -45,6 +46,8 @@ #define sp_flush_incoming(...) 0 #endif +static int buspirate_interface_version; + static int buspirate_sendrecv(unsigned char *buf, unsigned int writecnt, unsigned int readcnt) { int i, ret = 0; @@ -130,7 +133,13 @@ return ret; free(dev); - /* This is the brute force version, but it should work. */ + /* This is the brute force version, but it should work. + * It is guaranteed to fail if a previous flashrom run was aborted + * during a write with the new SPI commands in firmware v4.6 because + * that firmware may wait for up to 4096 bytes of input before + * responding to 0x00 again. The obvious workaround may cause startup + * penalties of more than one second. + */ for (i = 0; i < 19; i++) { /* Enter raw bitbang mode */ buf[0] = 0x00; @@ -141,6 +150,20 @@ /* Read any response and discard it. */ sp_flush_incoming(); } + /* USB is slow. The Bus Pirate is even slower. Apparently the flush + * action above is too fast or too early. Some stuff still remains in + * the pipe after the flush above, and one additional flush is not + * sufficient either. Use a 1.5 ms delay inside the loop to make + * mostly sure that at least one USB frame had time to arrive. + * Looping only 5 times is not sufficient and causes the + * ocassional failure. + * Folding the delay into the loop above is not reliable either. + */ + for (i = 0; i < 10; i++) { + usleep(1500); + /* Read any response and discard it. */ + sp_flush_incoming(); + } /* Enter raw bitbang mode */ buf[0] = 0x00; ret = buspirate_sendrecv(buf, 1, 5); @@ -148,6 +171,8 @@ return ret; if (memcmp(buf, "BBIO", 4)) { msg_perr("Entering raw bitbang mode failed!\n"); + msg_pdbg("Got %02x%02x%02x%02x%02x\n", + buf[0], buf[1], buf[2], buf[3], buf[4]); return 1; } msg_pdbg("Raw bitbang mode version %c\n", buf[4]); @@ -159,8 +184,12 @@ /* Enter raw SPI mode */ buf[0] = 0x01; ret = buspirate_sendrecv(buf, 1, 4); + if (ret) + return ret; if (memcmp(buf, "SPI", 3)) { msg_perr("Entering raw SPI mode failed!\n"); + msg_pdbg("Got %02x%02x%02x%02x\n", + buf[0], buf[1], buf[2], buf[3]); return 1; } msg_pdbg("Raw SPI mode version %c\n", buf[3]); @@ -210,6 +239,34 @@ return 1; } + /* Test combined SPI write/read, length 0. */ + buf[0] = 0x04; + buf[1] = 0; + buf[2] = 0; + buf[3] = 0; + buf[4] = 0; + ret = buspirate_sendrecv(buf, 5, 1); + if (ret) + return 1; + if (buf[0] != 0x01) { + msg_pdbg("SPI command set v2 not available, using old commands " + "present in firmware vX.Y or later\n"); + + /* FIXME: Check the error code? */ + /* We sent 4 bytes of 0x00, so we expect 4 BBIO1 responses. */ + buspirate_sendrecv(buf, 0, 4 * 5); + + /* Enter raw SPI mode again. */ + buf[0] = 0x01; + /* FIXME: Check the error code? */ + buspirate_sendrecv(buf, 1, 4); + + buspirate_interface_version = 1; + } else { + msg_pdbg("Using SPI command set v2.\n"); + buspirate_interface_version = 2; + } + buses_supported = CHIP_BUSTYPE_SPI; spi_controller = SPI_CONTROLLER_BUSPIRATE; @@ -251,12 +308,56 @@ return 0; } -int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, +int buspirate_spi_send_command_v2(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { static unsigned char *buf = NULL; int i = 0, ret = 0; + if (writecnt > 4096 || readcnt > 4096 || (readcnt + writecnt) > 4096) + return SPI_INVALID_LENGTH; + + /* 5 bytes extra for command, writelen, readlen. + * 1 byte extra for Ack/Nack. + */ + buf = realloc(buf, max(writecnt + 5, readcnt + 1)); + if (!buf) { + msg_perr("Out of memory!\n"); + exit(1); // -1 + } + + /* Combined SPI write/read. */ + buf[i++] = 0x04; + buf[i++] = (writecnt >> 8) & 0xff; + buf[i++] = writecnt & 0xff; + buf[i++] = (readcnt >> 8) & 0xff; + buf[i++] = readcnt & 0xff; + memcpy(buf + i, writearr, writecnt); + + ret = buspirate_sendrecv(buf, i + writecnt, 1 + readcnt); + + if (ret) { + msg_perr("Bus Pirate communication error!\n"); + return SPI_GENERIC_ERROR; + } + + if (buf[0] != 0x01) { + msg_perr("Protocol error while sending SPI write/read!\n"); + return SPI_GENERIC_ERROR; + } + + /* Skip Ack. */ + memcpy(readarr, buf + 1, readcnt); + + return ret; +} + +int buspirate_spi_send_command_v1(unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, unsigned char *readarr) +{ + static unsigned char *buf = NULL; + int i = 0, ret = 0; + if (writecnt > 16 || readcnt > 16 || (readcnt + writecnt) > 16) return SPI_INVALID_LENGTH; @@ -307,6 +408,17 @@ return ret; } +int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, unsigned char *readarr) +{ + switch (buspirate_interface_version) { + case 2: + return buspirate_spi_send_command_v2(writecnt, readcnt, writearr, readarr); + default: + return buspirate_spi_send_command_v1(writecnt, readcnt, writearr, readarr); + } +} + int buspirate_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) { return spi_read_chunked(flash, buf, start, len, 12); Index: flashrom-buspirate_newcommands/serial.c =================================================================== --- flashrom-buspirate_newcommands/serial.c (Revision 1130) +++ flashrom-buspirate_newcommands/serial.c (Arbeitskopie) @@ -200,8 +200,10 @@ #else tmp = write(sp_fd, buf, writecnt); #endif - if (tmp == -1) + if (tmp == -1) { + msg_perr("Serial port write error!\n"); return 1; + } if (!tmp) msg_pdbg("Empty write\n"); writecnt -= tmp; @@ -221,8 +223,10 @@ #else tmp = read(sp_fd, buf, readcnt); #endif - if (tmp == -1) + if (tmp == -1) { + msg_perr("Serial port read error!\n"); return 1; + } if (!tmp) msg_pdbg("Empty read\n"); readcnt -= tmp; -- http://www.hailfinger.org/

2 6

flashrom: Can't mmap memory
by Pádraig Brady 04 Oct '10

04 Oct '10

This issue looks similar to this: http://www.coreboot.org/pipermail/coreboot/2009-February/044672.html Any ideas? cheers, Pádraig. # /tmp/flashrom -V -c W25x80 flashrom v0.9.2-r1182 on Linux 2.6.32.10-90.fc12.i686 (i686), built with libpci 2.2.4, GCC 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 5 usecs, 716M loops per second, 10 myus = 10 us, 100 myus = 341 us, 1000 myus = 1126 us, 10000 myus = 9809 us, 20 myus = 20 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: " " DMI string baseboard-product-name: "945GSE" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "Intel ICH7M", enabling flash write... chipset PCI ID is 8086:27b9, 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x3 Root Complex Register Block address = 0xfed1c000 GCS = 0xc20445: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x0008 (SPIS) 0x02: 0x4320 (SPIC) 0x04: 0x00000000 (SPIA) 0x08: 0x001430ef (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0x00000000 (SPID2) 0x1c: 0x00000000 (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0x00000000 (SPID4) 0x2c: 0x00000000 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x00000000 (SPID6) 0x3c: 0x00000000 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0x00000000 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x5006 (PREOP) 0x56: 0x463b (OPTYPE) 0x58: 0x05d80302 (OPMENU) 0x5c: 0xc79f0190 (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) 0x6c: 0x00000000 (PBR3) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: SPI. Probing for Winbond W25x80, 1024 KB: Error accessing flash chip, 0x100000 bytes at 0xfff00000 /dev/mem mmap failed: Value too large for defined data type

3 11

[PATCH]Updated patch to use flashrom on libpayload
by Patrick Georgi 30 Sep '10

30 Sep '10

Hi, attached patch is updated to current trunk, with some minor cleanup in the MSR routines (no need to explicitely cast to unsigned long long). With this patch, it's easier to build flashrom with libpayload, but some crucial parts are still missing, most notably the frontend. Once flashrom is a library, it will be relatively easy to use. Signed-off-by: Patrick Georgi <patrick.georgi(a)coresystems.de>

2 2

[commit] r1184 - trunk
by repository service 30 Sep '10

30 Sep '10

Author: oxygene Date: Thu Sep 30 19:03:32 2010 New Revision: 1184 URL: http://flashrom.org/trac/flashrom/changeset/1184 Log: Add support for building flashrom against libpayload. This doesn't include changes to the frontend which must be done separately, so this won't work out of the box. This code was tested on hardware. Signed-off-by: Patrick Georgi <patrick.georgi(a)coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashrom.c trunk/hwaccess.c trunk/hwaccess.h trunk/layout.c trunk/physmap.c trunk/udelay.c Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Thu Sep 30 01:37:24 2010 (r1183) +++ trunk/flashrom.c Thu Sep 30 19:03:32 2010 (r1184) @@ -22,9 +22,11 @@ */ #include <stdio.h> -#include <fcntl.h> #include <sys/types.h> +#ifndef __LIBPAYLOAD__ +#include <fcntl.h> #include <sys/stat.h> +#endif #include <string.h> #include <stdlib.h> #include <getopt.h> Modified: trunk/hwaccess.c ============================================================================== --- trunk/hwaccess.c Thu Sep 30 01:37:24 2010 (r1183) +++ trunk/hwaccess.c Thu Sep 30 19:03:32 2010 (r1184) @@ -22,9 +22,11 @@ #include <string.h> #include <stdlib.h> #include <sys/types.h> -#if !defined (__DJGPP__) +#if !defined (__DJGPP__) && !defined(__LIBPAYLOAD__) #include <unistd.h> #include <fcntl.h> +#endif +#if !defined (__DJGPP__) #include <errno.h> #endif #include "flash.h" @@ -44,7 +46,7 @@ void get_io_perms(void) { -#if defined(__DJGPP__) +#if defined(__DJGPP__) || defined(__LIBPAYLOAD__) /* We have full permissions by default. */ return; #else Modified: trunk/hwaccess.h ============================================================================== --- trunk/hwaccess.h Thu Sep 30 01:37:24 2010 (r1183) +++ trunk/hwaccess.h Thu Sep 30 19:03:32 2010 (r1184) @@ -292,7 +292,7 @@ #endif #endif -#if !defined(__DARWIN__) && !defined(__FreeBSD__) && !defined(__DragonFly__) +#if !defined(__DARWIN__) && !defined(__FreeBSD__) && !defined(__DragonFly__) && !defined(__LIBPAYLOAD__) typedef struct { uint32_t hi, lo; } msr_t; msr_t rdmsr(int addr); int wrmsr(int addr, msr_t msr); @@ -307,6 +307,16 @@ msr_t freebsd_rdmsr(int addr); int freebsd_wrmsr(int addr, msr_t msr); #endif +#if defined(__LIBPAYLOAD__) +#include <arch/io.h> +#include <arch/msr.h> +typedef struct { uint32_t hi, lo; } msr_t; +msr_t libpayload_rdmsr(int addr); +int libpayload_wrmsr(int addr, msr_t msr); +#undef rdmsr +#define rdmsr libpayload_rdmsr +#define wrmsr libpayload_wrmsr +#endif #elif defined(__powerpc__) || defined(__powerpc64__) || defined(__ppc__) || defined(__ppc64__) Modified: trunk/layout.c ============================================================================== --- trunk/layout.c Thu Sep 30 01:37:24 2010 (r1183) +++ trunk/layout.c Thu Sep 30 19:03:32 2010 (r1184) @@ -134,6 +134,7 @@ } #endif +#ifndef __LIBPAYLOAD__ int read_romlayout(char *name) { FILE *romlayout; @@ -181,6 +182,7 @@ return 0; } +#endif int find_romentry(char *name) { Modified: trunk/physmap.c ============================================================================== --- trunk/physmap.c Thu Sep 30 01:37:24 2010 (r1183) +++ trunk/physmap.c Thu Sep 30 19:03:32 2010 (r1184) @@ -28,7 +28,7 @@ #include "flash.h" /* Do we need any file access or ioctl for physmap or MSR? */ -#if !defined(__DJGPP__) +#if !defined(__DJGPP__) && !defined(__LIBPAYLOAD__) #include <sys/stat.h> #include <fcntl.h> #include <errno.h> @@ -104,6 +104,31 @@ __dpmi_free_physical_address_mapping(&mi); } +#elif defined(__LIBPAYLOAD__) +#include <arch/virtual.h> + +#define MEM_DEV "" + +void *sys_physmap(unsigned long phys_addr, size_t len) +{ + return (void*)phys_to_virt(phys_addr); +} + +#define sys_physmap_rw_uncached sys_physmap +#define sys_physmap_ro_cached sys_physmap + +void physunmap(void *virt_addr, size_t len) +{ +} + +int setup_cpu_msr(int cpu) +{ + return 0; +} + +void cleanup_cpu_msr(void) +{ +} #elif defined(__DARWIN__) #include <DirectIO/darwinio.h> @@ -453,6 +478,20 @@ { // Nothing, yet. } +#elif defined(__LIBPAYLOAD__) +msr_t libpayload_rdmsr(int addr) +{ + msr_t msr; + unsigned long long val = _rdmsr(addr); + msr.lo = val & 0xffffffff; + msr.hi = val >> 32; + return msr; +} + +int libpayload_wrmsr(int addr, msr_t msr) +{ + _wrmsr(addr, msr.lo | ((unsigned long long)msr.hi << 32)); +} #else msr_t rdmsr(int addr) { Modified: trunk/udelay.c ============================================================================== --- trunk/udelay.c Thu Sep 30 01:37:24 2010 (r1183) +++ trunk/udelay.c Thu Sep 30 19:03:32 2010 (r1184) @@ -19,6 +19,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#ifndef __LIBPAYLOAD__ + #include <unistd.h> #include <sys/time.h> #include <stdlib.h> @@ -179,3 +181,15 @@ } } +#else + +void myusec_calibrate_delay(void) +{ + get_cpu_speed(); +} + +void internal_delay(int usecs) +{ + udelay(usecs); +} +#endif

1 0

ASUS P5GDC-V Deluxe
by Emdek 30 Sep '10

30 Sep '10

Hello The main board maker is ASUS, model name is P5GDC-V Deluxe (in one place text on package says P5GDC-V DELUXE-EAYO). Here is specification and link to BIOS downloads: http://asus.com.pl/product.aspx?P_ID=JRsYCkkzvo4pVF3i Outputs of commands 'flashrom -V', 'lspci -nnvvvxxx', 'superiotool -dV' are attached. -- Best regards, Michal

1 0

← Newer
1
2
3
4
5
6
7
8
...
22
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom September 2010