flashrom December 2009

flashrom@flashrom.org

56 participants
195 discussions

flashrom information
by Aaron Bauman 10 Dec '09

10 Dec '09

Calibrating delay loop... 913M loops per second, 100 myus = 204 us. OK. No coreboot table found. Found chipset "ATI(AMD) SB600", enabling flash write... SPI base address is at 0xfec00100 OK. Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x55, id2 0x53 Probing for AMD Am29F080B, 1024 KB: probe_jedec: id1 0x4d, id2 0x49, id1 parity violation Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x55, id2 0x53 Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0x4d, id2 0x49 Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Atmel AT25DF021, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25DF041A, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25DF081, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25DF161, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25DF321, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25DF321A, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25DF641, 8192 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25F512B, 64 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25FS010, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25FS040, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT26DF041, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT26DF081A, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT26DF161, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT26DF161A, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT26F004, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Atmel AT45CS1282, 16896 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB011D, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB021D, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB041D, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB081D, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB161D, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB321C, 4224 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB321D, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB642D, 8192 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for AMIC A25L40P, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=4 The FIFO pointer 6 is 0. [ef][30][14][ef] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x55, id2 0x53 Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x55, id2 0x43 Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x55, id2 0x43 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x55, id2 0x53 Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for Macronix MX25L512, 64 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405, 8192 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805, 16384 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0x55, id2 0x53 Probing for Numonyx M25PE10, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV010, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512, 64 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x4d, id2 0x49 Probing for Spansion S25FL016A, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF016B, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040B, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040.REMS, 512 KB: sb600_spi_command, cmd=90, writecnt=3, readcnt=2 [0] [0] [0] [ 0][ 0][ 0]The FIFO pointer 6 is 3. [ef][13] REMS returned ef 13. probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B.REMS, 512 KB: sb600_spi_command, cmd=90, writecnt=3, readcnt=2 [0] [0] [0] [ 0][ 0][ 0]The FIFO pointer 6 is 3. [ef][13] REMS returned ef 13. probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x55, id2 0x53 Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x79, id2 0xc4 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0x4d, id2 0x49, id1 parity violation Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x55, id2 0x53 Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0x4d, id2 0x49, id1 parity violation Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x4d, id2 0x49 Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0x4d, id2 0x49, id1 parity violation Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P10-A, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P20, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P40, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P40-old, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. Probing for ST M25P80, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P16, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P32, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P64, 8192 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P128, 16384 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M29F002B, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x55, id2 0x53 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x55, id2 0x43 Probing for ST M29W010B, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for ST M29W040B, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x55, id2 0x53 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x55, id2 0x53 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0x4d, id2 0x49 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0x4d, id2 0x49 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x55, id2 0x53 Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Winbond W25x10, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Winbond W25x20, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Winbond W25x40, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Winbond W25x80, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Winbond W29EE011, 128 KB: === Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. === Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x55, id2 0x53, id1 parity violation Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0x4d, id2 0x49, id1 parity violation Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0x4d, did 0x49 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0x55, did 0x53 Probing for Atmel unknown Atmel SPI chip, 0 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for EON unknown EON SPI chip, 0 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Macronix unknown Macronix SPI chip, 0 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for PMC unknown PMC SPI chip, 0 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for SST unknown SST SPI chip, 0 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST unknown ST SPI chip, 0 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3 The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename Note: flashrom can never write when the flash chip isn't found automatically. 00:00.0 Host bridge [0600]: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956] Subsystem: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: [c4] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 3.00 Link Frequency 0: [a] Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [40] HyperTransport: Retry Mode Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [9c] HyperTransport: #1a 00: 02 10 56 59 06 00 30 22 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 e0 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 56 59 30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00 40: 08 54 00 c0 c1 00 00 00 00 00 00 00 42 20 05 00 50: 02 10 56 59 08 9c 00 90 08 10 00 00 00 00 00 00 60: 7d 00 00 00 01 00 00 00 00 02 20 00 60 50 00 78 70: 00 00 00 00 00 00 00 00 c4 89 0f 00 00 00 00 00 80: 00 00 00 00 10 00 00 03 20 01 30 00 31 20 00 00 90: 00 00 00 d0 7d 00 00 00 00 00 00 00 08 00 3c d0 a0: 82 00 00 00 00 00 00 80 00 00 00 00 79 40 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 80 08 40 80 01 20 00 11 11 d0 00 00 00 d0: 60 0a f5 7f 02 00 00 00 00 20 00 00 00 00 00 00 e0: 00 00 05 00 ff ff ff ff e8 00 00 80 ec 00 00 80 f0: 00 00 00 00 00 80 80 00 00 00 00 00 00 00 00 00 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Address: fee0f00c Data: 4159 Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5956] Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information <?> Capabilities: [110] Virtual Channel <?> Kernel driver in use: pcieport-driver 00: 02 10 78 59 07 05 10 00 00 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 c1 c1 00 00 20: 90 fe 90 fe 01 d0 f1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 1b 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 a0 42 00 20 80 00 00 60: 10 08 00 00 02 0d 30 00 40 00 02 f1 80 25 14 00 70: 00 00 40 01 00 00 01 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 42 00 01 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 b0 01 00 0c f0 e0 fe 59 41 00 00 00 00 00 00 b0: 0d b8 00 00 02 10 56 59 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 50 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:05.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port B) [1002:597b] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Address: fee0f00c Data: 4161 Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5956] Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information <?> Capabilities: [110] Virtual Channel <?> Kernel driver in use: pcieport-driver 00: 02 10 7b 59 07 05 10 40 00 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 d1 d1 00 00 20: a0 fe a0 fe f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 03 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 a0 42 00 20 80 00 00 60: 10 08 00 00 12 0c 30 01 40 00 11 70 80 0c 2c 00 70: 00 00 40 01 00 00 01 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 b0 01 00 0c f0 e0 fe 61 41 00 00 00 00 00 00 b0: 0d b8 00 00 02 10 56 59 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 50 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7378] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at b000 [size=8] Region 1: I/O ports at a000 [size=4] Region 2: I/O ports at 9000 [size=8] Region 3: I/O ports at 8000 [size=4] Region 4: I/O ports at 7000 [size=16] Region 5: Memory at fe8ff800 (32-bit, non-prefetchable) [size=1K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ahci 00: 02 10 80 43 07 01 30 02 00 01 06 01 10 40 00 00 10: 01 b0 00 00 01 a0 00 00 01 90 00 00 01 80 00 00 20: 01 70 00 00 00 f8 8f fe 00 00 00 00 62 14 78 73 30: 00 00 00 00 60 00 00 00 00 00 00 00 05 01 00 00 40: 10 00 80 02 01 00 10 00 01 00 00 00 00 00 00 00 50: 05 00 84 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 12 00 10 00 0f 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 06 00 00 2c d6 01 b4 00 d6 01 b4 00 90: d6 01 b4 00 d6 01 b4 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 b8 00 00 00 00 00 00 00 b8 00 00 b0: 00 00 00 00 00 b8 00 00 00 00 00 00 00 b8 00 00 c0: 00 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 87 43 17 01 a0 02 00 10 03 0c 10 40 80 00 10: 00 e0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 0f 01 00 00 40: 80 1f 00 00 0a 84 b7 18 07 35 00 00 00 00 00 00 50: 00 9c 00 00 00 00 00 00 ff ff ff ff ff 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 ff 00 00 80 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 88 43 17 01 a0 02 00 10 03 0c 10 40 00 00 10: 00 d0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe8fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 89 43 17 01 a0 02 00 10 03 0c 10 40 00 00 10: 00 c0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe8fb000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 8a 43 17 01 a0 02 00 10 03 0c 10 40 00 00 10: 00 b0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe8fa000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 8b 43 17 01 a0 02 00 10 03 0c 10 40 00 00 10: 00 a0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00: 02 10 86 43 17 01 b0 02 00 20 03 0c 10 40 00 00 10: 00 f0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 40 00 0e 08 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 08 c0 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 e4 02 7e 00 00 40 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 0a 00 e0 20 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16] Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ 00: 02 10 85 43 03 04 30 02 14 00 05 0c 00 00 80 00 10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 40: d4 2b 00 04 00 00 00 00 0f ff 00 00 00 00 00 00 50: f0 01 f0 0e f0 0f f0 0f 11 0b f0 0f 00 00 00 00 60: 01 00 24 00 bf fd 9e 83 3f 90 00 00 20 00 00 00 70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f 80: e0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80 90: 01 0b 00 00 bb de ff 00 00 00 00 00 00 00 00 00 a0: 00 00 ff ff ff ff f0 08 00 ff 14 06 16 79 20 18 b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 30 00 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] 00: 02 10 8c 43 05 00 20 02 00 8a 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 ff 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40: 99 99 00 00 ff ff 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 40 00 10 2c 01 07 01 00 00 00 ff ff 0f 00 70: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe8f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: HDA Intel 00: 02 10 83 43 06 00 10 04 00 00 03 04 10 40 00 00 10: 04 40 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 50 00 00 00 00 00 00 00 0f 00 00 00 40: 00 00 02 00 00 00 00 00 00 00 00 00 01 00 00 00 50: 01 00 42 c8 00 00 00 00 00 00 00 00 00 00 00 00 60: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 02 10 8d 43 0f 00 20 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 04 00 00 00 40 c0 c3 f7 17 ff 42 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 0e 00 00 0e 00 0f 00 f0 ff ff ff 70: 67 45 23 01 00 00 00 00 01 00 00 00 05 00 00 00 80: 08 00 03 a8 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 01 c0 fe 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 02 10 84 43 07 01 a0 02 00 01 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 40 e0 e0 80 22 20: b0 fe b0 fe f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 40: 26 00 0c ff 00 00 00 00 0c 01 3f d1 00 00 00 00 50: 01 00 00 00 08 00 03 a8 00 00 00 00 85 00 ff ff 60: ca 0e 17 00 ba 18 10 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 06 e0: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: [a] Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00 50: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00 60: 00 00 03 00 e0 00 00 00 20 a8 4e 01 20 f8 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 20 11 11 60 0a f5 ff 13 00 00 00 90: 92 02 85 04 00 00 00 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 2f 01 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 03 00 e0 00 80 ff ef 00 03 00 f0 00 00 ff ff 00 b0: 03 0a 00 00 00 0b 00 00 03 00 d0 00 00 ff df 00 c0: 13 10 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 f0: 03 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 00 00 01 01 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: e0 3e 78 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 06 00 48 0e 00 00 00 00 80: 05 00 00 00 00 00 00 00 24 fa 7c 5d 45 03 22 00 90: 10 00 01 00 0b 80 58 7f 07 03 00 80 00 00 00 00 a0: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 12 23 4e de 9b 00 00 00 7b 03 00 10 2c 08 a0 02 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: cd 25 62 27 fc fd 10 3f 56 d5 c8 5d f8 2f 20 58 e0: e9 5e 3c c6 70 1f 32 06 44 60 ba a3 1b 4d 30 1a f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: 00 01 00 00 5c 00 b0 4a 00 00 00 00 00 00 00 00 50: 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 04 00 24 34 c0 00 00 30 52 80 01 00 70: 53 11 04 00 01 01 18 00 14 0c 20 00 14 09 09 00 80: 81 e6 00 e6 e6 41 e6 01 08 00 00 00 00 40 40 00 90: 03 00 00 00 10 00 00 00 00 01 2f 01 00 00 00 00 a0: 00 08 02 a0 80 18 0c 29 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 75 38 02 80 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 25 0f 81 c8 16 1c 00 03 22 63 47 01 e0: 00 00 00 00 30 0c c0 1f 79 7f 07 02 00 00 00 00 f0: 0f 00 10 00 00 00 00 00 00 00 00 00 42 0f 10 00 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4870] [1002:9440] (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. Device [1462:8030] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at c000 [size=256] Expansion ROM at fe9c0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable+ Address: 00000000fee0f00c Data: 4189 Capabilities: [100] Vendor Specific Information <?> Kernel driver in use: fglrx_pci Kernel modules: fglrx 00: 02 10 40 94 07 05 10 00 00 00 00 03 10 00 80 00 10: 0c 00 00 d0 00 00 00 00 04 00 9f fe 00 00 00 00 20: 01 c0 00 00 00 00 00 00 00 00 00 00 62 14 30 80 30: 00 00 9c fe 50 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 30 80 50: 01 58 03 06 00 00 00 00 10 a0 12 00 a0 8f 2c 01 60: 10 09 00 00 02 0d 00 00 40 00 02 11 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 02 00 01 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 00 81 00 0c f0 e0 fe 00 00 00 00 89 41 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.1 Audio device [0403]: ATI Technologies Inc HD48x0 audio [1002:aa30] Subsystem: Micro-Star International Co., Ltd. Device [1462:aa30] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe9ec000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [100] Vendor Specific Information <?> Kernel driver in use: HDA Intel 00: 02 10 30 aa 07 01 10 00 00 00 03 04 10 00 80 00 10: 04 c0 9e fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 30 aa 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 30 aa 50: 01 58 03 06 00 00 00 00 10 a0 12 00 a0 8f 2c 01 60: 10 09 00 00 02 0d 00 00 40 00 02 11 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Micro-Star International Co., Ltd. Device [1462:376c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 26 Region 0: I/O ports at d800 [size=256] Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Vital Product Data <?> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/2 Enable+ Address: 00000000fee0f00c Data: 4171 Capabilities: [60] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <128ns, L1 unlimited ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [84] Vendor Specific Information <?> Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [12c] Virtual Channel <?> Capabilities: [148] Device Serial Number 00-e0-4c-68-00-00-00-01 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 00: ec 10 68 81 07 05 10 40 01 00 00 02 10 00 00 00 10: 01 d8 00 00 00 00 00 00 04 f0 af fe 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 6c 37 30: 00 00 ac fe 40 00 00 00 00 00 00 00 0b 01 00 00 40: 01 48 c2 f7 00 00 00 00 03 50 00 00 00 00 00 00 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 71 41 00 00 60: 10 84 01 00 63 7e 00 00 00 58 1a 00 11 f4 03 00 70: 40 00 11 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11 90: 08 30 00 00 25 4f 0a 00 b5 20 07 00 2a 01 00 00 a0: 02 28 ff 01 00 00 00 00 00 08 00 00 03 00 03 00 b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev c0) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:376d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 3 Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at e800 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 44 30 17 01 10 02 c0 10 00 0c 10 40 00 00 10: 00 f8 bf fe 01 e8 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 6d 37 30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 20 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 02 e4 00 00 00 00 00 00 00 00 62 14 00 03 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

1 0

working: HP Compaq nc6400 laptop
by Daniel Challen 09 Dec '09

09 Dec '09

Hi, I successfully used flashrom (it was maybe 6 months ago, so I'm unsure which version of flashrom I used) to upgrade the official BIOS on an HP laptop (lspci, flashrom etc output attached). This was before I noticed the warning against flashrom on laptops, so I consider myself lucky ;) Thanks for a great tool - Dan (Norky on irc)

1 0

[PATCH] Boards: Tighten up ID match list.
by Luc Verhaegen 09 Dec '09

09 Dec '09

I do not want to wait for individual acks on this one. If matches are wrong, we should at one point get reports, and the problems can be trivially fixed as no information is lost nor have board enables been removed. Please Ack when you believe the changes make sense. Luc Verhaegen.

2 2

[commit] r796 - trunk
by svn＠flashrom.org 09 Dec '09

09 Dec '09

Author: libv Date: 2009-12-09 12:39:02 +0100 (Wed, 09 Dec 2009) New Revision: 796 Modified: trunk/board_enable.c Log: Boards: Tighten up ID match list. Tighten up board id match table in preparation of upcoming matching changes. Some boards are deliberately broken so that we will receive reports or can remove support later (for instance, for agami aruma, which, probably is no longer available in the wild). * Acorp 6A815EPD: make autodetectable. * Agami Aruma: remove bogus subsystem ids. Due to lacking secondary main id, this match will break soon. * GIGABYTE GA-2761GXDK: Add secondary main id. Subsystem ids are not possible as they are all copies of the main ids. Will still require -m. * GIGABYTE GA-M57SLI-S4: add full set of subsystem ids. Will keep match name for coreboot name matching. * GIGABYTE GA-M61P-S3: Add secondary main id. Remove name match. Probably has good subsystem ids, but no info was found. So deliberately broken match. * GIGABYTE GA-MA790FX-DQ6: pointless name match. * IBM x3455: add full ids, remove name match. * Kontron 986LCD-M: remove full id match as it is bogus. Kontron is an embedded vendor and does not bother with subsystem ids, so make this board name match only. * MSI MS-6590 (KT4 Ultra): remove name match. * MSI MS-7135 (K8N Neo3): add full id set, keep name match for coreboot. * VIA EPIA-N/NL: remove name match. * VIA PC3500G: remove name match. Signed-off-by: Luc Verhaegen <libv(a)skynet.be> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Modified: trunk/board_enable.c =================================================================== --- trunk/board_enable.c 2009-12-09 07:53:01 UTC (rev 795) +++ trunk/board_enable.c 2009-12-09 11:39:02 UTC (rev 796) @@ -389,10 +389,23 @@ return 0; } +/* + * Set GPIO lines in the Broadcom HT-1000 southbridge. + * + * It's not a Super I/O but it uses the same index/data port method. + */ +static int board_hp_dl145_g3_enable(const char *name) +{ + /* GPIO 0 reg from PM regs */ + /* Set GPIO 2 and 5 high, connected to flash WP# and TBL# pins. */ + sio_mask(0xcd6, 0x44, 0x24, 0x24); + + return 0; +} + static int board_ibm_x3455(const char *name) { - /* Set GPIO lines in the Broadcom HT-1000 southbridge. */ - /* It's not a Super I/O but it uses the same index/data port method. */ + /* raise gpio13 */ sio_mask(0xcd6, 0x45, 0x20, 0x20); return 0; @@ -480,17 +493,6 @@ return nvidia_mcp_gpio_set(0x31, 0x01); } -static int board_hp_dl145_g3_enable(const char *name) -{ - /* Set GPIO lines in the Broadcom HT-1000 southbridge. */ - /* GPIO 0 reg from PM regs */ - /* Set GPIO 2 and 5 high, connected to flash WP# and TBL# pins. */ - /* It's not a Super I/O but it uses the same index/data port method. */ - sio_mask(0xcd6, 0x44, 0x24, 0x24); - - return 0; -} - /** * Suited for EPoX EP-BX3, and maybe some other Intel 440BX based boards. */ @@ -1153,9 +1155,9 @@ struct board_pciid_enable board_pciid_enables[] = { /* first pci-id set [4], second pci-id set [4], coreboot id [2], vendor name board name flash enable */ {0x8086, 0x2926, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, "Abit", "IP35", intel_ich_gpio16_raise}, - {0x8086, 0x1130, 0, 0, 0x105a, 0x0d30, 0x105a, 0x4d33, "acorp", "6a815epd", "Acorp", "6A815EPD", board_acorp_6a815epd}, + {0x105a, 0x0d30, 0x105a, 0x4d33, 0x8086, 0x1130, 0x8086, 0, NULL, NULL, "Acorp", "6A815EPD", board_acorp_6a815epd}, {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, "ASRock", "P4i65GV", intel_ich_gpio23_raise}, - {0x1022, 0x746B, 0x1022, 0x36C0, 0, 0, 0, 0, "AGAMI", "ARUMA", "agami", "Aruma", w83627hf_gpio24_raise_2e}, + {0x1022, 0x746B, 0, 0, 0, 0, 0, 0, "AGAMI", "ARUMA", "agami", "Aruma", w83627hf_gpio24_raise_2e}, {0x1106, 0x3177, 0x17F2, 0x3177, 0x1106, 0x3148, 0x17F2, 0x3148, NULL, NULL, "Albatron", "PM266A", w836xx_memw_enable_2e}, {0x1106, 0x3205, 0x1106, 0x3205, 0x10EC, 0x8139, 0xA0A0, 0x0477, NULL, NULL, "AOpen", "vKM400Am-S", board_aopen_vkm400}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, "artecgroup", "dbe61", "Artec Group", "DBE61", board_artecgroup_dbe6x}, @@ -1175,28 +1177,25 @@ {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3059, 0x1695, 0x3005, NULL, NULL, "EPoX", "EP-8K5A2", w836xx_memw_enable_2e}, {0x10EC, 0x8139, 0x1695, 0x9001, 0x11C1, 0x5811, 0x1695, 0x9015, NULL, NULL, "EPoX", "EP-8RDA3+", nvidia_mcp_gpio31_raise}, {0x8086, 0x7110, 0, 0, 0x8086, 0x7190, 0, 0, "epox", "ep-bx3", "EPoX", "EP-BX3", board_epox_ep_bx3}, - {0x1039, 0x0761, 0, 0, 0, 0, 0, 0, "gigabyte", "2761gxdk", "GIGABYTE", "GA-2761GXDK", it87xx_probe_spi_flash}, + {0x1039, 0x0761, 0, 0, 0x10EC, 0x8168, 0, 0, "gigabyte", "2761gxdk", "GIGABYTE", "GA-2761GXDK", it87xx_probe_spi_flash}, {0x1106, 0x3227, 0x1458, 0x5001, 0x10ec, 0x8139, 0x1458, 0xe000, NULL, NULL, "GIGABYTE", "GA-7VT600", it8705_rom_write_enable}, {0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", nvidia_mcp_gpio21_raise}, - {0x10de, 0x0360, 0, 0, 0, 0, 0, 0, "gigabyte", "m57sli", "GIGABYTE", "GA-M57SLI-S4", it87xx_probe_spi_flash}, - {0x10de, 0x03e0, 0, 0, 0, 0, 0, 0, "gigabyte", "m61p", "GIGABYTE", "GA-M61P-S3", it87xx_probe_spi_flash}, + {0x10DE, 0x0360, 0x1458, 0x0C11, 0x10DE, 0x0369, 0x1458, 0x5001, "gigabyte", "m57sli", "GIGABYTE", "GA-M57SLI-S4", it87xx_probe_spi_flash}, + {0x10de, 0x03e0, 0, 0, 0x10DE, 0x03D0, 0, 0, NULL, NULL, "GIGABYTE", "GA-M61P-S3", it87xx_probe_spi_flash}, {0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4391, 0x1458, 0xb000, NULL, NULL, "GIGABYTE", "GA-MA78G-DS3H", it87xx_probe_spi_flash}, {0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4391, 0x1458, 0xb002, NULL, NULL, "GIGABYTE", "GA-MA78GM-S2H", it87xx_probe_spi_flash}, - /* SB600 LPC, RD790 North. Neither are specific to the GA-MA790FX-DQ6. The coreboot ID is here to be able to trigger the board enable more easily. */ - {0x1002, 0x438d, 0x1458, 0x5001, 0x1002, 0x5956, 0x1002, 0x5956, "gigabyte", "ma790fx-dq6", "GIGABYTE", "GA-MA790FX-DQ6", it87xx_probe_spi_flash}, + {0x1002, 0x438d, 0x1458, 0x5001, 0x1002, 0x5956, 0x1002, 0x5956, NULL, NULL, "GIGABYTE", "GA-MA790FX-DQ6", it87xx_probe_spi_flash}, {0x1166, 0x0223, 0x103c, 0x320d, 0x102b, 0x0522, 0x103c, 0x31fa, "hp", "dl145_g3", "HP", "DL145 G3", board_hp_dl145_g3_enable}, - {0x1166, 0x0205, 0x1014, 0x0347, 0, 0, 0, 0, "ibm", "x3455", "IBM", "x3455", board_ibm_x3455}, + {0x1166, 0x0205, 0x1014, 0x0347, 0x1002, 0x515E, 0x1014, 0x0325, NULL, NULL, "IBM", "x3455", board_ibm_x3455}, {0x1039, 0x5513, 0x8086, 0xd61f, 0x1039, 0x6330, 0x8086, 0xd61f, NULL, NULL, "Intel", "D201GLY", wbsio_check_for_spi}, {0x1022, 0x7468, 0, 0, 0, 0, 0, 0, "iwill", "dk8_htx", "IWILL", "DK8-HTX", w83627hf_gpio24_raise_2e}, - /* Note: There are >= 2 version of the Kontron 986LCD-M/mITX! */ - {0x8086, 0x27b8, 0, 0, 0, 0, 0, 0, "kontron", "986lcd-m", "Kontron", "986LCD-M", board_kontron_986lcd_m}, - {0x10ec, 0x8168, 0x10ec, 0x8168, 0x104c, 0x8023, 0x104c, 0x8019, "kontron", "986lcd-m", "Kontron", "986LCD-M", board_kontron_986lcd_m}, + {0x8086, 0x27A0, 0, 0, 0x8086, 0x27b8, 0, 0, "kontron", "986lcd-m", "Kontron", "986LCD-M", board_kontron_986lcd_m}, {0x8086, 0x2411, 0x8086, 0x2411, 0x8086, 0x7125, 0x0e11, 0xb165, NULL, NULL, "Mitac", "6513WU", board_mitac_6513wu}, - {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, "msi", "kt4ultra", "MSI", "MS-6590 (KT4 Ultra)",board_msi_kt4v}, + {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, NULL, NULL, "MSI", "MS-6590 (KT4 Ultra)",board_msi_kt4v}, {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)",w83627thf_gpio4_4_raise_2e}, {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, "MSI", "MS-6712 (KT4V)", board_msi_kt4v}, {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, "MSI", "MS-7046", intel_ich_gpio19_raise}, - {0x10de, 0x005e, 0, 0, 0, 0, 0, 0, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", w83627thf_gpio4_4_raise_4e}, + {0x10DE, 0x005E, 0x1462, 0x7135, 0x10DE, 0x0050, 0x1462, 0x7135, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", w83627thf_gpio4_4_raise_4e}, {0x1106, 0x3099, 0, 0, 0x1106, 0x3074, 0, 0, "shuttle", "ak31", "Shuttle", "AK31", w836xx_memw_enable_2e}, {0x1106, 0x3104, 0x1297, 0xa238, 0x1106, 0x3059, 0x1297, 0xc063, NULL, NULL, "Shuttle", "AK38N", it8705f_write_enable_2e}, {0x10DE, 0x0050, 0x1297, 0x5036, 0x1412, 0x1724, 0x1297, 0x5036, NULL, NULL, "Shuttle", "FN25", board_shuttle_fn25}, @@ -1204,9 +1203,9 @@ {0x8086, 0x1076, 0x8086, 0x1176, 0x1106, 0x3059, 0x10f1, 0x2498, NULL, NULL, "Tyan", "S2498 (Tomcat K7M)", board_asus_a7v8x_mx}, {0x1106, 0x0314, 0x1106, 0xaa08, 0x1106, 0x3227, 0x1106, 0xAA08, NULL, NULL, "VIA", "EPIA-CN", board_via_epia_sp}, {0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, "VIA", "EPIA M/MII/...", board_via_epia_m}, - {0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, "via", "epia-n", "VIA", "EPIA-N/NL", board_via_epia_n}, /* TODO: remove coreboot ids */ + {0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, NULL, NULL, "VIA", "EPIA-N/NL", board_via_epia_n}, {0x1106, 0x3227, 0x1106, 0xAA01, 0x1106, 0x0259, 0x1106, 0xAA01, NULL, NULL, "VIA", "EPIA SP", board_via_epia_sp}, - {0x1106, 0x5337, 0x1458, 0xb003, 0x1106, 0x287e, 0x1106, 0x337e, "via", "pc3500g", "VIA", "PC3500G", it87xx_probe_spi_flash}, + {0x1106, 0x5337, 0x1458, 0xb003, 0x1106, 0x287e, 0x1106, 0x337e, NULL, NULL, "VIA", "PC3500G", it87xx_probe_spi_flash}, { 0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL}, /* end marker */ };

1 0

Chipsets: remove sis630 chipset enable for sis540.
by Luc Verhaegen 09 Dec '09

09 Dec '09

Luc Verhaegen.

2 2

[PATCH] Add support for ASUS M2V-MX board
by David Bartley 09 Dec '09

09 Dec '09

The way I figured this out was by picking the chip closest to the BIOS (the VT8237A southbridge) and inverting each of the GPIO lines one at a time. The GPIO stuff was gleaned from the VT8237R datasheet since I couldn't find the 'A one anywhere. All in all, a very fun and educating experience; next step, coreboot! On a related note, reading the flash back seems slightly broken; sometimes the read gets a few bytes wrong. -- David

5 16

[commit] r795 - trunk
by svn＠flashrom.org 09 Dec '09

09 Dec '09

Author: libv Date: 2009-12-09 08:53:01 +0100 (Wed, 09 Dec 2009) New Revision: 795 Modified: trunk/board_enable.c Log: Boards: Add Asus M2V-MX. Expands via vt823x gpio support to also accept gpio5. Signed-off-by: David Bartley <dtbartle(a)csclub.uwaterloo.ca> Acked-by: Luc Verhaegen <libv(a)skynet.be> Modified: trunk/board_enable.c =================================================================== --- trunk/board_enable.c 2009-12-09 07:43:13 UTC (rev 794) +++ trunk/board_enable.c 2009-12-09 07:53:01 UTC (rev 795) @@ -180,7 +180,7 @@ static void vt823x_gpio_set(struct pci_dev *dev, uint8_t gpio, int raise) { uint16_t base; - uint8_t val, bit; + uint8_t val, bit, offset; if ((gpio >= 12) && (gpio <= 15)) { /* GPIO12-15 -> output */ @@ -192,24 +192,28 @@ val = pci_read_byte(dev, 0xE4); val |= 0x20; pci_write_byte(dev, 0xE4, val); + } else if (gpio == 5) { + val = pci_read_byte(dev, 0xE4); + val |= 0x01; + pci_write_byte(dev, 0xE4, val); } else { fprintf(stderr, "\nERROR: " "VT823x GPIO%02d is not implemented.\n", gpio); return; } - /* Now raise/drop the GPIO line itself. */ - bit = 0x01 << (gpio - 8); - /* We need the I/O Base Address for this board's flash enable. */ base = pci_read_word(dev, 0x88) & 0xff80; - val = INB(base + 0x4D); + offset = 0x4C + gpio / 8; + bit = 0x01 << (gpio % 8); + + val = INB(base + offset); if (raise) val |= bit; else val &= ~bit; - OUTB(val, base + 0x4D); + OUTB(val, base + offset); } /** @@ -1100,6 +1104,26 @@ } /** + * Suited for Asus M2V-MX: VIA K8M890 + VT8237A + IT8716F + */ +static int board_asus_m2v_mx(const char *name) +{ + struct pci_dev *dev; + + dev = pci_dev_find(0x1106, 0x3337); /* VT8237A ISA bridge */ + if (!dev) { + fprintf(stderr, "\nERROR: VT8237A ISA bridge not found.\n"); + return -1; + } + + /* GPO5 is connected to WP# and TBL#. */ + vt823x_gpio_set(dev, 5, 1); + + return 0; +} + + +/** * Below is the list of boards which need a special "board enable" code in * flashrom before their ROM chip can be accessed/written to. * @@ -1139,6 +1163,7 @@ {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, "ASUS", "A7V600-X", board_asus_a7v600x}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, "ASUS", "A7V8X", board_asus_a7v8x}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, "ASUS", "A7V8X-MX SE", board_asus_a7v8x_mx}, + {0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, "ASUS", "M2V-MX", board_asus_m2v_mx}, {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, "ASUS", "P4B266", intel_ich_gpio22_raise}, {0x8086, 0x1A30, 0x1043, 0x8025, 0x8086, 0x244B, 0x104D, 0x80F0, NULL, NULL, "ASUS", "P4B266-LM", intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, "ASUS", "P4P800-E Deluxe", intel_ich_gpio21_raise},

1 0

[commit] r794 - trunk
by svn＠flashrom.org 09 Dec '09

09 Dec '09

Author: libv Date: 2009-12-09 08:43:13 +0100 (Wed, 09 Dec 2009) New Revision: 794 Modified: trunk/board_enable.c trunk/chipset_enable.c Log: Chipset: remove sis630 chipset enable for sis540. SiS630 chipset enable is equal to sis540 plus superio "poking". Superio poking equals IT8705F flash write enable, which is currently dealt with on a board by board basis in board_enable.c. Not all 630 and newer based boards come with it8705/sis950 superios. Signed-off-by: Luc Verhaegen <libv(a)skynet.be> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Modified: trunk/board_enable.c =================================================================== --- trunk/board_enable.c 2009-12-08 17:26:24 UTC (rev 793) +++ trunk/board_enable.c 2009-12-09 07:43:13 UTC (rev 794) @@ -814,6 +814,8 @@ * Suited for: * - Biostar P4M80-M4: VIA P4M800 + VT8237 + IT8705AF * - GIGABYTE GA-7VT600: VIA KT600 + VT8237 + IT8705 + * + * SIS950 superio probably requires the same flash write enable. */ static int it8705_rom_write_enable(const char *name) { Modified: trunk/chipset_enable.c =================================================================== --- trunk/chipset_enable.c 2009-12-08 17:26:24 UTC (rev 793) +++ trunk/chipset_enable.c 2009-12-09 07:43:13 UTC (rev 794) @@ -225,40 +225,6 @@ return ret; } -static int enable_flash_sis630(struct pci_dev *dev, const char *name) -{ - uint8_t tmp; - uint16_t siobase; - int ret; - - ret = enable_flash_sis540(dev, name); - - /* The same thing on SiS 950 Super I/O side... */ - - /* First probe for Super I/O on config port 0x2e. */ - siobase = 0x2e; - enter_conf_mode_ite(siobase); - - if (INB(siobase + 1) != 0x87) { - /* If that failed, try config port 0x4e. */ - siobase = 0x4e; - enter_conf_mode_ite(siobase); - if (INB(siobase + 1) != 0x87) { - printf("Can not find SuperI/O.\n"); - return -1; - } - } - - /* Enable flash mapping. Works for most old ITE style SuperI/O. */ - tmp = sio_read(siobase, 0x24); - tmp |= 0xfc; - sio_write(siobase, 0x24, tmp); - - exit_conf_mode_ite(siobase); - - return ret; -} - /* Datasheet: * - Name: 82371AB PCI-TO-ISA / IDE XCELERATOR (PIIX4) * - URL: http://www.intel.com/design/intarch/datashts/290562.htm @@ -1171,23 +1137,23 @@ {0x1039, 0x5600, NT, "SiS", "600", enable_flash_sis530}, {0x1039, 0x0620, NT, "SiS", "620", enable_flash_sis530}, {0x1039, 0x0540, NT, "SiS", "540", enable_flash_sis540}, - {0x1039, 0x0630, NT, "SiS", "630", enable_flash_sis630}, - {0x1039, 0x0635, NT, "SiS", "635", enable_flash_sis630}, - {0x1039, 0x0640, NT, "SiS", "640", enable_flash_sis630}, - {0x1039, 0x0645, NT, "SiS", "645", enable_flash_sis630}, - {0x1039, 0x0646, NT, "SiS", "645DX", enable_flash_sis630}, - {0x1039, 0x0648, NT, "SiS", "648", enable_flash_sis630}, - {0x1039, 0x0650, NT, "SiS", "650", enable_flash_sis630}, - {0x1039, 0x0651, NT, "SiS", "651", enable_flash_sis630}, - {0x1039, 0x0655, NT, "SiS", "655", enable_flash_sis630}, - {0x1039, 0x0730, NT, "SiS", "730", enable_flash_sis630}, - {0x1039, 0x0733, NT, "SiS", "733", enable_flash_sis630}, - {0x1039, 0x0735, OK, "SiS", "735", enable_flash_sis630}, - {0x1039, 0x0740, NT, "SiS", "740", enable_flash_sis630}, - {0x1039, 0x0745, NT, "SiS", "745", enable_flash_sis630}, - {0x1039, 0x0746, NT, "SiS", "746", enable_flash_sis630}, - {0x1039, 0x0748, NT, "SiS", "748", enable_flash_sis630}, - {0x1039, 0x0755, NT, "SiS", "755", enable_flash_sis630}, + {0x1039, 0x0630, NT, "SiS", "630", enable_flash_sis540}, + {0x1039, 0x0635, NT, "SiS", "635", enable_flash_sis540}, + {0x1039, 0x0640, NT, "SiS", "640", enable_flash_sis540}, + {0x1039, 0x0645, NT, "SiS", "645", enable_flash_sis540}, + {0x1039, 0x0646, NT, "SiS", "645DX", enable_flash_sis540}, + {0x1039, 0x0648, NT, "SiS", "648", enable_flash_sis540}, + {0x1039, 0x0650, NT, "SiS", "650", enable_flash_sis540}, + {0x1039, 0x0651, NT, "SiS", "651", enable_flash_sis540}, + {0x1039, 0x0655, NT, "SiS", "655", enable_flash_sis540}, + {0x1039, 0x0730, NT, "SiS", "730", enable_flash_sis540}, + {0x1039, 0x0733, NT, "SiS", "733", enable_flash_sis540}, + {0x1039, 0x0735, OK, "SiS", "735", enable_flash_sis540}, + {0x1039, 0x0740, NT, "SiS", "740", enable_flash_sis540}, + {0x1039, 0x0745, NT, "SiS", "745", enable_flash_sis540}, + {0x1039, 0x0746, NT, "SiS", "746", enable_flash_sis540}, + {0x1039, 0x0748, NT, "SiS", "748", enable_flash_sis540}, + {0x1039, 0x0755, NT, "SiS", "755", enable_flash_sis540}, {0x1106, 0x8324, OK, "VIA", "CX700", enable_flash_vt823x}, {0x1106, 0x8231, NT, "VIA", "VT8231", enable_flash_vt823x}, {0x1106, 0x3074, NT, "VIA", "VT8233", enable_flash_vt823x},

1 0

PIIX bustype
by Maciej Pijanka 08 Dec '09

08 Dec '09

Hello My PIIX machines has only paralell, i doubt if there is any other option for that chipset. One line patch in attachment. Signed-Off: Maciej Pijanka <maciej.pijanka(a)gmail.com> -- Maciej Pijanka reg. Linux user #133161

2 2

[commit] r793 - trunk
by svn＠flashrom.org 08 Dec '09

08 Dec '09

Author: uwe Date: 2009-12-08 18:26:24 +0100 (Tue, 08 Dec 2009) New Revision: 793 Modified: trunk/chipset_enable.c Log: Intel PIIX* chipsets only support parallel flash (no LPC/FWH/SPI). Signed-off-by: Maciej Pijanka <maciej.pijanka(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/chipset_enable.c =================================================================== --- trunk/chipset_enable.c 2009-12-03 12:25:34 UTC (rev 792) +++ trunk/chipset_enable.c 2009-12-08 17:26:24 UTC (rev 793) @@ -270,6 +270,8 @@ uint16_t old, new; uint16_t xbcs = 0x4e; /* X-Bus Chip Select register. */ + buses_supported = CHIP_BUSTYPE_PARALLEL; + old = pci_read_word(dev, xbcs); /* Set bit 9: 1-Meg Extended BIOS Enable (PCI master accesses to

1 0

← Newer
1
...
13
14
15
16
17
18
19
20
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom December 2009