These are the _real_ logbufs. Ignore the last one I sent.
Any ideas?
- James
This is straight out of NVRAM; it halts early:
Linux version 2.4.0-test1 (jimi@yellow) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #41 SMP Fri Jun 16 11:38:58 MDT 2000. BIOS-provided physical RAM map:. e820: 000000000009f000 @ 0000000000000000 (usable). e820: 0000000003e00000 @ 0000000000100000 (usable). James: Generating my own MP Floating Pointer table kmem_alloc: NULL ptr (name=unknown). On node 0 totalpages: 16128. zone(0): 4096 pages.. zone(1): 12032 pages.. zone(2): 0 pages.. Intel MultiProcessor Specification v1.4. Virtual Wire compatibility mode.. Default MP configuration #5. Processor #0 Pentium(tm) Pro APIC version 16. Floating point unit present.. Machine Exception supported.. 64 bit compare & exchange supported.. Processor #1 Pentium(tm) Pro APIC version 16. Floating point unit present.. Machine Exception supported.. 64 bit compare & exchange supported.. Bus #0 is ISA . Bus #1 is PCI . I/O APIC #2 Version 16 at 0xFEC00000.. Int: type 0, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 02. Int: type 0, pol 0, trig 0, bus 0, IRQ 01, APIC ID 2, APIC INT 01. Int: type 0, pol 0, trig 0, bus 0, IRQ 03, APIC ID 2, APIC INT 03. Int: type 0, pol 0, trig 0, bus 0, IRQ 04, APIC ID 2, APIC INT 04. Int: type 0, pol 0, trig 0, bus 0, IRQ 05, APIC ID 2, APIC INT 05. Int: type 0, pol 0, trig 0, bus 0, IRQ 06, APIC ID 2, APIC INT 06. Int: type 0, pol 0, trig 0, bus 0, IRQ 07, APIC ID 2, APIC INT 07. Int: type 0, pol 0, trig 0, bus 0, IRQ 08, APIC ID 2, APIC INT 08. Int: type 0, pol 0, trig 0, bus 0, IRQ 09, APIC ID 2, APIC INT 09. Int: type 0, pol 0, trig 0, bus 0, IRQ 0a, APIC ID 2, APIC INT 0a. Int: type 0, pol 0, trig 0, bus 0, IRQ 0b, APIC ID 2, APIC INT 0b. Int: type 0, pol 0, trig 0, bus 0, IRQ 0c, APIC ID 2, APIC INT 0c. Int: type 0, pol 0, trig 0, bus 0, IRQ 0d, APIC ID 2, APIC INT 0d. Int: type 0, pol 0, trig 0, bus 0, IRQ 0e, APIC ID 2, APIC INT 0e. Int: type 0, pol 0, trig 0, bus 0, IRQ 0f, APIC ID 2, APIC INT 0f. Int: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 00. Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00. Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01. Processors: 2. James: a) 1 b) 3 c) 16 d) 16 e) fee00000. mapped APIC to ffffe000 (fee00000). mapped IOAPIC to ffffd000 (fec00000). Enabling extended fast FPU save and restore ... done.. Enabling KNI unmasked exception support ... done.. Kernel command line: root=/dev/hda1 ide0=reset. Initializing CPU#0. Detected 497445265 Hz processor.. Console: colour dummy device 80x25. Calibrating delay loop... 989.59 BogoMIPS. Memory: 61860k/64512k available (643k kernel code, 2264k reserved, 82k data, 180k init, 0k highmem). Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes). Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes). Page-cache hash table entries: 16384 (order: 4, 65536 bytes). kmem_create: Poisoning requested, but con given - bdev_cache. Inode-cache hash table entries: 4096 (order: 3, 32768 bytes). kmem_create: Poisoning requested, but con given - inode_cache. CPU serial number disabled.. Checking 386/387 coupling... OK, FPU using exception 16 error reporting.. Checking 'hlt' instruction... OK.. POSIX conformance testing by UNIFIX. mtrr: v1.36 (20000221) Richard Gooch (rgooch@atnf.csiro.au). CPU serial number disabled.. CPU0: Intel Pentium III (Katmai) stepping 03. per-CPU timeslice cutoff: 0.00 usecs.. weird, boot CPU (#15) not listed by the BIOS.. Getting VERSION: ffffffff. Getting VERSION: ffffffff. Getting LVT0: ffffffff. Getting LVT1: ffffffff. masked ExtINT on CPU#0. ESR value before enabling vector: ffffffff. ESR value after enabling vector: ffffffff. CPU present map: 8003. Booting processor 1/0 eip 2000. Setting warm reset code and vector.. 1.. 2.. 3.. Asserting INIT.. Waiting for send to finish....
++++++++++++++++++++++++++ Deasserting INIT.. Waiting for send to finish....
++++++++++++++++++++++++++ #startup loops: 2.. Sending STARTUP #1.. After apic_write.. Startup point 1.. Waiting for send to finish....
++++++++++++++++++++++++++ After Startup.. APIC never delivered???. APIC delivery error (ef).. phys CPU #0 not responding - cannot use it.. Booting processor 1/1 eip 2000. Setting warm reset code and vector.. 1.. 2.. 3.. Asserting INIT.. Waiting for send to finish....
++++++++++++++++++++++++++ Deasserting INIT.. Waiting for send to finish....
++++++++++++++++++++++++++ #startup loops: 2.. Sending STARTUP #1.. After apic_write.. Startup point 1.. Waiting for send to finish....
++++++++++++++++++++++++++ After Startup.. APIC never delivered???. APIC delivery error (ef).. phys CPU #1 not responding - cannot use it.. Before bogomips.. Error: only one processor found.. Boot done.. ENABLING IO-APIC IRQs. ...changing IO-APIC physical APIC ID to 2 ... Kernel panic: could not set ID!. . In idle task - not syncing
This is after a BIOS boot via LILO. It works (up until the disk panic, but that is OK).
Linux version 2.4.0-test1 (jimi@yellow) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #41 SMP Fri Jun 16 11:38:58 MDT 2000. BIOS-provided physical RAM map:. e820: 000000000009f800 @ 0000000000000000 (usable). e820: 0000000000000800 @ 000000000009f800 (reserved). e820: 0000000000018000 @ 00000000000e8000 (reserved). e820: 000000000fef0000 @ 0000000000100000 (usable). e820: 000000000000fc00 @ 000000000fff0000 (ACPI data). e820: 0000000000000400 @ 000000000ffffc00 (ACPI NVS). e820: 0000000000010000 @ 00000000fec00000 (reserved). e820: 0000000000001000 @ 00000000fee00000 (reserved). e820: 0000000000080000 @ 00000000fff80000 (reserved). James: Generating my own MP Floating Pointer table kmem_alloc: NULL ptr (name=unknown). On node 0 totalpages: 65520. zone(0): 4096 pages.. zone(1): 61424 pages.. zone(2): 0 pages.. Intel MultiProcessor Specification v1.4. Virtual Wire compatibility mode.. Default MP configuration #5. Processor #0 Pentium(tm) Pro APIC version 16. Floating point unit present.. Machine Exception supported.. 64 bit compare & exchange supported.. Internal APIC present.. Processor #1 Pentium(tm) Pro APIC version 16. Floating point unit present.. Machine Exception supported.. 64 bit compare & exchange supported.. Internal APIC present.. Bus #0 is ISA . Bus #1 is PCI . I/O APIC #2 Version 16 at 0xFEC00000.. Int: type 0, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 02. Int: type 0, pol 0, trig 0, bus 0, IRQ 01, APIC ID 2, APIC INT 01. Int: type 0, pol 0, trig 0, bus 0, IRQ 03, APIC ID 2, APIC INT 03. Int: type 0, pol 0, trig 0, bus 0, IRQ 04, APIC ID 2, APIC INT 04. Int: type 0, pol 0, trig 0, bus 0, IRQ 05, APIC ID 2, APIC INT 05. Int: type 0, pol 0, trig 0, bus 0, IRQ 06, APIC ID 2, APIC INT 06. Int: type 0, pol 0, trig 0, bus 0, IRQ 07, APIC ID 2, APIC INT 07. Int: type 0, pol 0, trig 0, bus 0, IRQ 08, APIC ID 2, APIC INT 08. Int: type 0, pol 0, trig 0, bus 0, IRQ 09, APIC ID 2, APIC INT 09. Int: type 0, pol 0, trig 0, bus 0, IRQ 0a, APIC ID 2, APIC INT 0a. Int: type 0, pol 0, trig 0, bus 0, IRQ 0b, APIC ID 2, APIC INT 0b. Int: type 0, pol 0, trig 0, bus 0, IRQ 0c, APIC ID 2, APIC INT 0c. Int: type 0, pol 0, trig 0, bus 0, IRQ 0d, APIC ID 2, APIC INT 0d. Int: type 0, pol 0, trig 0, bus 0, IRQ 0e, APIC ID 2, APIC INT 0e. Int: type 0, pol 0, trig 0, bus 0, IRQ 0f, APIC ID 2, APIC INT 0f. Int: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 00. Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00. Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01. Processors: 2. James: a) 1 b) 3 c) 16 d) 16 e) fee00000. mapped APIC to ffffe000 (fee00000). mapped IOAPIC to ffffd000 (fec00000). Enabling extended fast FPU save and restore ... done.. Enabling KNI unmasked exception support ... done.. Kernel command line: BOOT_IMAGE=james ro root=301. Initializing CPU#0. Detected 497444516 Hz processor.. Console: colour dummy device 80x25. Calibrating delay loop... 992.87 BogoMIPS. Memory: 255944k/262080k available (643k kernel code, 5748k reserved, 82k data, 180k init, 0k highmem). Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes). Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes). Page-cache hash table entries: 65536 (order: 6, 262144 bytes). kmem_create: Poisoning requested, but con given - bdev_cache. Inode-cache hash table entries: 16384 (order: 5, 131072 bytes). kmem_create: Poisoning requested, but con given - inode_cache. CPU serial number disabled.. Checking 386/387 coupling... OK, FPU using exception 16 error reporting.. Checking 'hlt' instruction... OK.. POSIX conformance testing by UNIFIX. mtrr: v1.36 (20000221) Richard Gooch (rgooch@atnf.csiro.au). CPU serial number disabled.. CPU0: Intel Pentium III (Katmai) stepping 03. per-CPU timeslice cutoff: 1428.64 usecs.. Getting VERSION: 40011. Getting VERSION: 40011. Getting LVT0: 700. Getting LVT1: 400. enabled ExtINT on CPU#0. ESR value before enabling vector: 00000000. ESR value after enabling vector: 00000000. CPU present map: 3. Booting processor 1/0 eip 2000. Setting warm reset code and vector.. 1.. 2.. 3.. Asserting INIT.. Waiting for send to finish.... +Deasserting INIT.. Waiting for send to finish.... +#startup loops: 2.. Sending STARTUP #1.. After apic_write.. Startup point 1.. Waiting for send to finish.... Initializing CPU#1. +CPU#1 (phys ID: 0) waiting for CALLOUT. Sending STARTUP #2.. After apic_write.. Startup point 1.. Waiting for send to finish.... +After Startup.. Before Callout 1.. After Callout 1.. CALLIN, before setup_local_APIC().. masked ExtINT on CPU#1. ESR value before enabling vector: 00000000. ESR value after enabling vector: 00000000. Calibrating delay loop... 992.87 BogoMIPS. Stack at about c148dfbc. CPU serial number disabled.. OK.. CPU1: Intel Pentium III (Katmai) stepping 03. CPU has booted.. Before bogomips.. Total of 2 processors activated (1985.74 BogoMIPS).. Before bogocount - setting activated=1.. Boot done.. ENABLING IO-APIC IRQs. ...changing IO-APIC physical APIC ID to 2 ... ok.. Synchronizing Arb IDs.. init IO_APIC IRQs. IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.. ..TIMER: vector=49 pin1=2 pin2=0. activating NMI Watchdog ... done.. number of MP IRQ sources: 16.. number of IO-APIC #2 registers: 24.. testing the IO APIC........................ . IO APIC #2....... .... register #00: 02000000. ....... : physical APIC id: 02. .... register #01: 00170011. ....... : max redirection entries: 0017. ....... : IO APIC version: 0011. .... register #02: 00000000. ....... : arbitration: 00. .... IRQ redirection table:. NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: . 00 000 00 1 0 0 0 0 0 0 00. 01 003 03 0 0 0 0 0 1 1 39. 02 003 03 0 0 0 0 0 1 1 31. 03 003 03 0 0 0 0 0 1 1 41. 04 003 03 0 0 0 0 0 1 1 49. 05 003 03 0 0 0 0 0 1 1 51. 06 003 03 0 0 0 0 0 1 1 59. 07 003 03 0 0 0 0 0 1 1 61. 08 003 03 0 0 0 0 0 1 1 69. 09 003 03 0 0 0 0 0 1 1 71. 0a 003 03 0 0 0 0 0 1 1 79. 0b 003 03 0 0 0 0 0 1 1 81. 0c 003 03 0 0 0 0 0 1 1 89. 0d 000 00 1 0 0 0 0 0 0 00. 0e 003 03 0 0 0 0 0 1 1 91. 0f 003 03 0 0 0 0 0 1 1 99. 10 000 00 1 0 0 0 0 0 0 00. 11 000 00 1 0 0 0 0 0 0 00. 12 000 00 1 0 0 0 0 0 0 00. 13 000 00 1 0 0 0 0 0 0 00. 14 000 00 1 0 0 0 0 0 0 00. 15 000 00 1 0 0 0 0 0 0 00. 16 000 00 1 0 0 0 0 0 0 00. 17 000 00 1 0 0 0 0 0 0 00. IRQ to pin mappings:. IRQ0 -> 2. IRQ1 -> 1. IRQ3 -> 3. IRQ4 -> 4. IRQ5 -> 5. IRQ6 -> 6. IRQ7 -> 7. IRQ8 -> 8. IRQ9 -> 9. IRQ10 -> 10. IRQ11 -> 11. IRQ12 -> 12. IRQ13 -> 13. IRQ14 -> 14. IRQ15 -> 15. .................................... done.. calibrating APIC timer ... . ..... CPU clock speed is 497.4372 MHz.. ..... host bus clock speed is 99.4872 MHz.. cpu: 0, clocks: 994872, slice: 331624. CPU0C0:994864,C:663232,D:8,S:331624,C:994872. cpu: 1, clocks: 994872, slice: 331624. CPU1C0:994864,C:331616,D:0,S:331624,C:994872. checking TSC synchronization across CPUs: passed.. Setting commenced=1, go go go. PCI: Using configuration type 1. PCI: Probing PCI hardware. PCI: Discovered primary peer bus ff [IRQ]. PCI: Using IRQ router PIIX [8086/122e] at 00:12.0. Linux NET4.0 for Linux 2.3. Based upon Swansea University Computer Society NET3.039. kmem_create: Poisoning requested, but con given - skbuff_head_cache. Starting kswapd v1.6. VFS: Cannot open root device "301" or 03:01. Please append a correct "root=" boot option. Kernel panic: VFS: Unable to mount root fs on 03:01
- To unsubscribe: send mail to majordomo@freiburg.linux.de with 'unsubscribe openbios' in the body of the message