26 Feb
2016
26 Feb
'16
11:59 p.m.
On 26 Feb 2016, at 23:54, Programmingkid
<programmingkidx(a)gmail.com> wrote:
On Feb 26, 2016, at 5:06 PM, Hervé Poussineau wrote:
For me the repetition issue only occurs in Mac OS 9.1, but then all 9.0/9.0.4
images I have crash Qemu before this point.
Le 13/02/2016 13:40, Mark Cave-Ayland a écrit :
Thank you for this information.
Well it looks like we are stuck. For some reason Mac OS 9 will not successfully boot in
QEMU with the OpenTransport extension. Are we even sure the ESCC is to blame? I do know a
lot of applications depend on this extension. Internet Explorer and Netscape are two
examples. So going without it is not going to be much fun. There must be some way to
satisfy OpenTransport's needs. I think step one is actually finding out what those
needs are.
Also for some reason when I try to type something into Macsbug when using it under Mac OS
9.0.4, the character is repeated to the end of the field. Anyone else see this issue?
On 13/02/16 12:08, Alyssa Milburn wrote:
Hi,
I tried to use MacsBug to find some more details about current emulation problems.
I share with you some handful commands I found:
- sc/sc7 (Stack Crawl) to see the stack trace
- es (Exit Shell) to exit MacsBug and try to continue
- ip [addr] (68k code) or ipp [addr] (ppc code) to disassemble around some addresses
Full MacsBug manual is available at
https://web.archive.org/web/20110605022118/http://developer.apple.com/tools…
I've tried lastest OpenBIOS revision (with all ESCC fixes). Unfortunately, MacOS
never tries to access unimplemented DBDMA channels and I was unable to find more hints
about what's happens.
However, with https://www.ilande.co.uk/tmp/openbios/MacOS921.iso.xz and exiting MacsBug
with 'es' command, I'm able to browse cd contents :)
Hervé On Sat, Feb 13, 2016 at 11:25:49AM +0000, Mark
Cave-Ayland wrote:
> Hmmm interesting - I'll take a look a bit later. In the meantime, I've
> uploaded the CD image I'm loading to
> https://www.ilande.co.uk/tmp/openbios/MacOS921.iso.xz. This is basically
> stripped of all extensions minus MacsBug, OT and OT ASLM modules.
>
> I'm using an OpenBIOS binary built from the branch I pushed to github,
> current QEMU git master and the following command line:
>
> ./qemu-system-ppc -M mac99 -bios openbios-qemu.elf.nostrip -cdrom
> MacOS921.iso -cpu G3 -boot d
>
> Let me know if that helps you recreate a similar environment or not.
I also still just get crashes, even with your image. :-( I've tried
several compilers for both the OpenBIOS side and qemu.
I wonder if it might be some timing problem.. I have pretty slow computers
probably (mostly I use a 2.4GHz Core 2 Duo), are you using something
(dramatically) faster?
I'm using a 1.8GHz Core 2 Duo laptop, so mine should be slower than
that! My setup is plain Debian wheezy (gcc 4.7.2) but with a
custom-built 4.1 kernel. Compilers for OpenBIOS I have built by hand and
my current cross-gcc is gcc 5.1.0.
I do have a couple of extra options in my build-ppc.sh script below -
not sure if they make any difference though.
build@kentang:~/src/qemu/git$ cat build-ppc.sh
#!/bin/bash
pushd qemu
make distclean
STRIP= './configure' '--target-list=ppc-softmmu'
'--prefix=/home/build/rel-qemu-git' '--enable-gtk'
'--disable-pie'
make -j2 V=1 install
popd
I've also uploaded my OpenBIOS binary image which I've just confirmed
with git master and my debugging enabled still gets stuck in the ESCC
polling loop to http://www.ilande.co.uk/tmp/openbios/openbios-ppc-escc
if that helps.
HTH,
Mark.