Author: wmb Date: 2007-05-31 22:15:17 +0200 (Thu, 31 May 2007) New Revision: 431
Modified: dev/olpc/kb3700/ecio.fth Log: Support new EC command protocol.
Modified: dev/olpc/kb3700/ecio.fth =================================================================== --- dev/olpc/kb3700/ecio.fth 2007-05-31 00:05:36 UTC (rev 430) +++ dev/olpc/kb3700/ecio.fth 2007-05-31 20:15:17 UTC (rev 431) @@ -27,12 +27,25 @@
: flash-write-protect-off ( -- ) GPIO5 ec@ h# 80 or GPIO5 ec! ;
- -: ec-cmd ( cmd -- response ) - h# 6c pc! begin 1 ms h# 6c pc@ 3 and 1 = until 1 ms h# 68 pc@ - h# ff h# 6c pc! \ Release ownership +: wait-ib-empty ( -- ) + d# 1000 0 do h# 6c pc@ 2 and 0= if unloop exit then 1 ms loop + true abort" EC port 6c input buffer timeout" ; +: ec-cmd-out ( cmd -- ) wait-ib-empty h# 6c pc! ; +: ec-wb ( -- ) wait-ib-empty h# 68 pc! ; +: ec-rb ( -- b ) + d# 1000 0 do + h# 6c pc@ 3 and 1 = if + h# 68 pc@ + unloop exit + then + 1 ms + loop + true abort" EC port 6c output buffer timeout" +;
+: ec-cmd ( cmd -- response ) ec-cmd-out ec-rb ; + : ec-cmd66 ( byte -- ) h# 66 pc! \ It typically requires about 200 polls @@ -40,53 +53,13 @@ true abort" EC didn't respond to port 66 command" ;
-: ec-cmd@ ( -- b ) h# 6c pc@ ; - -: ec-release ( -- ) h# ff h# 6c pc! 1 ms h# 68 pc@ drop ; -: ec-wait-wr ( -- ) - d# 140 0 do - ec-cmd@ 2 and 0= if unloop exit then - 5 ms - loop - ." EC write timed out" cr -; -\ Empirically, it can take a long time for the EC to sense the game -\ keys when several are down at once. 500 mS is not enough. -: ec-wait-rd ( -- ) - d# 700 0 do - ec-cmd@ 1 and if unloop exit then - d# 1 ms - loop - ." EC read timed out" cr -; -: flush-ec ( -- ) - begin ec-cmd@ dup h# 80 and while - drop ." EC release" cr ec-release d# 10 ms - repeat ( 6c-val ) - - begin 1 and while ( ) - h# 68 pc@ drop ( ) - d# 200 us ( ) - ec-cmd@ ( 6c-val ) - repeat ( 6c-val ) -; -: ec-cmd! ( b -- ) ec-wait-wr h# 6c pc! ec-wait-wr ; - -: ec-dat@ ( -- b ) ec-wait-rd h# 68 pc@ ; -: ec-dat! ( b -- ) ec-wait-wr h# 68 pc! ec-wait-wr ; - -: ec-rb ( -- b ) 0 ec-dat! ec-dat@ ; : ec-rw ( -- w ) ec-rb ec-rb swap bwjoin ; -: ec-wb ( -- w ) ec-dat! ; : ec-ww ( -- w ) wbsplit ec-wb ec-wb ;
-: ec-cmda ( b -- ) flush-ec ec-cmd! ec-dat@ drop ; -: ec-cmd0 ( -- ) ec-cmda ec-release ; +: ec-cmd-w@ ( cmd -- w ) ec-cmd-out ec-rw ; +: ec-cmd-b@ ( cmd -- b ) ec-cmd ; +: ec-cmd-b! ( b cmd -- ) ec-cmd-out ec-wb ;
-: ec-cmd-w@ ( cmd -- w ) ec-cmda ec-rw ec-release ; -: ec-cmd-b@ ( cmd -- w ) ec-cmda ec-rb ec-release ; -: ec-cmd-b! ( b cmd -- ) ec-cmda ec-wb ec-release ; - : bat-voltage@ ( -- w ) h# 10 ec-cmd-w@ ; : bat-current@ ( -- w ) h# 11 ec-cmd-w@ ; : bat-acr@ ( -- w ) h# 12 ec-cmd-w@ ; @@ -94,51 +67,48 @@ : ambient-temp@ ( -- w ) h# 14 ec-cmd-w@ ; : bat-status@ ( -- b ) h# 15 ec-cmd-b@ ; : bat-soc@ ( -- b ) h# 16 ec-cmd-b@ ; -: bat-gauge-id@ ( -- sn0 .. sn7 ) - h# 17 ec-cmda - 8 0 do ec-rb loop - ec-release -; -: bat-gauge@ ( -- b ) h# 18 ec-cmda h# 31 ec-wb ec-dat@ ec-release ; \ 31 is the EEPROM address +: bat-gauge-id@ ( -- sn0 .. sn7 ) h# 17 ec-cmd-out 8 0 do ec-rb loop ; +: bat-gauge@ ( -- b ) h# 18 ec-cmd-out h# 31 ec-wb ec-rb ; \ 31 is the EEPROM address : board-id@ ( -- b ) h# 19 ec-cmd-b@ ; : sci-source@ ( -- b ) h# 1a ec-cmd-w@ ; : sci-mask! ( b -- ) h# 1b ec-cmd-b! ; : sci-mask@ ( -- b ) h# 1c ec-cmd-b@ ; -: game-key@ ( -- w ) h# 1d ec-cmda ec-rw ec-release ; -: ec-date! ( day month year -- ) h# 1e ec-cmda ec-wb ec-wb ec-wb ec-release ; +: game-key@ ( -- w ) h# 1d ec-cmd-out ec-rw ; +: ec-date! ( day month year -- ) h# 1e ec-cmd-out ec-wb ec-wb ec-wb ; : ec-abnormal@ ( -- b ) h# 1f ec-cmd-b@ ; \ XXX is this byte or word?
-: bat-init-lifepo4 ( -- ) h# 21 ec-cmd0 ; -: bat-init-nimh ( -- ) h# 22 ec-cmd0 ; +: bat-init-lifepo4 ( -- ) h# 21 ec-cmd-out ; +: bat-init-nimh ( -- ) h# 22 ec-cmd-out ; : wlan-off ( -- ) 0 h# 23 ec-cmd-b! ; : wlan-on ( -- ) 1 h# 23 ec-cmd-b! ; -: wlan-wake ( -- ) h# 24 ec-cmd0 ; -: wlan-rst ( -- ) h# 25 ec-cmd0 ; +: wlan-wake ( -- ) h# 24 ec-cmd-out ; +: wlan-rst ( -- ) h# 25 ec-cmd-out ; : dcon-disable ( -- ) 0 h# 26 ec-cmd-b! ; : dcon-enable ( -- ) 1 h# 26 ec-cmd-b! ; -: reset-ec-warm ( -- ) h# 27 ec-cmd0 ; -: reset-ec ( -- ) h# 28 ec-cmd0 ; -: write-protect-fw ( -- ) h# 29 ec-cmd0 ; -\ : disable-ec-io ( -- ) h# 2a ec-cmd0 ; \ ??? +: reset-ec-warm ( -- ) h# 27 ec-cmd-out ; +: reset-ec ( -- ) h# 28 ec-cmd-out ; +: write-protect-fw ( -- ) h# 29 ec-cmd-out ; +: ebook-mode? ( -- ) h# 2a ec-cmd-b@ ;
\ EC mailbox access words
-: ec-mb-adr@ ( -- w ) h# 80 ec-cmda ec-rw ; -: ec-mb-adr! ( w -- ) h# 81 ec-cmda ec-ww ; -: ec-mb-setup ( cmd w -- ) ec-mb-adr! ec-cmda ; +: ec-mb-adr@ ( -- w ) h# 80 ec-cmd-out ec-rw ; +: ec-mb-adr! ( w -- ) h# 81 ec-cmd-out ec-ww ; +: ec-mb-setup ( cmd w -- ) ec-mb-adr! ec-cmd-out ;
: ec-mb-b@ ( adr -- b ) h# 8a ec-mb-setup h# 84 ec-cmd-b@ ; : ec-mb-w@ ( adr -- w ) h# 88 ec-mb-setup h# 82 ec-cmd-w@ ; -: ec-mb-b! ( b adr -- ) h# 85 ec-mb-setup ec-wb h# 8b ec-cmda ec-release ; -: ec-mb-w! ( w adr -- ) h# 83 ec-mb-setup ec-ww h# 89 ec-cmda ec-release ; +: ec-mb-b! ( b adr -- ) h# 85 ec-mb-setup ec-wb h# 8b ec-cmd-out ; +: ec-mb-w! ( w adr -- ) h# 83 ec-mb-setup ec-ww h# 89 ec-cmd-out ;
\ SCI source codes: \ SCI_WAKEUP_EVENT 0x01 // Game button, \ SCI_BATTERY_STATUS_CHANGE 0x02 // AC plugged/unplugged, ... \ Battery inserted/remove, Battery Low, Battery full, Battery destroy \ SCI_SOC_CHANGE 0x04 // SOC Change -\ SCI_ABNORMAL_EVENT 0x08 +\ SCI_ABNORMAL_EVENT 0x08 \ SCI_EB_MODE_CHANGE 0x10 +\ SCI_WAKEUP_WLAN_EVENT 0x20
\ This command hard-resets the EC deeply enough for the SP write-protect to \ be off when the system is powered up again.
-
svn＠openbios.org