[PATCH] SPARC64: configure the Sabre PCI TAS register

[Mark Cave-Ayland]

Make sure that we declare the same range available as set by the virtual-dma
properties hardcoded in sabre_configure().

This register is checked by FreeBSD during boot which panics if it finds a
default (zero) value.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland(a)ilande.co.uk>
---
 openbios-devel/arch/sparc64/openbios.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/openbios-devel/arch/sparc64/openbios.c
b/openbios-devel/arch/sparc64/openbios.c
index 9cc1ac2..3a36146 100644
--- a/openbios-devel/arch/sparc64/openbios.c
+++ b/openbios-devel/arch/sparc64/openbios.c
@@ -116,6 +116,20 @@ sparc64_reset_all(void)
         : : "r" (val), "r" (addr) : "memory");
 }
 
+/* PCI Target Address Space Register (see UltraSPARC IIi User's Manual
+  section 19.3.0.4) */
+#define PBM_PCI_TARGET_AS              0x2028
+#define PBM_PCI_TARGET_AS_CD_ENABLE    0x40
+
+static void
+sparc64_set_tas_register(unsigned long val)
+{
+    unsigned long addr = APB_SPECIAL_BASE + PBM_PCI_TARGET_AS;
+
+    asm("stxa %0, [%1] 0x15\n\t"
+        : : "r" (val), "r" (addr) : "memory");
+}
+
 static void cpu_generic_init(const struct cpudef *cpu, uint32_t clock_frequency)
 {
     unsigned long iu_version;
@@ -574,6 +588,10 @@ arch_init( void )
 	modules_init();
 #ifdef CONFIG_DRIVER_PCI
         ob_pci_init();
+
+        /* Set TAS register to match the virtual-dma properties
+           set during sabre configure */
+        sparc64_set_tas_register(PBM_PCI_TARGET_AS_CD_ENABLE);
 #endif
         nvconf_init();
         device_end();
-- 
1.7.10.4

[PATCH] SPARC64: configure the Sabre PCI TAS register

[Peter Firmstone]

Anyone know if OpenBios works with Sun's Hypervisor (also free software) on it's
Niagara servers?

Wondering if it's feasible to use this for vga bios emulation for 3d graphics support
with Gentoo linux?

Cheers,

Pete.

----- Original message -----
  Make sure that we declare the same range available as
set by the
 virtual-dma properties hardcoded in sabre_configure().
 
 This register is checked by FreeBSD during boot which panics if it finds
 a default (zero) value.
 
 Signed-off-by: Mark Cave-Ayland <mark.cave-ayland(a)ilande.co.uk>
 ---
   openbios-devel/arch/sparc64/openbios.c |     18 ++++++++++++++++++
   1 file changed, 18 insertions(+)
 
 diff --git a/openbios-devel/arch/sparc64/openbios.c
 b/openbios-devel/arch/sparc64/openbios.c index 9cc1ac2..3a36146 100644
 --- a/openbios-devel/arch/sparc64/openbios.c
 +++ b/openbios-devel/arch/sparc64/openbios.c
 @@ -116,6 +116,20 @@ sparc64_reset_all(void)
                   : : "r" (val), "r" (addr) : "memory");
   }
   
 +/* PCI Target Address Space Register (see UltraSPARC IIi User's Manual
 +   section 19.3.0.4) */
 +#define PBM_PCI_TARGET_AS                           0x2028
 +#define PBM_PCI_TARGET_AS_CD_ENABLE       0x40
 +
 +static void
 +sparc64_set_tas_register(unsigned long val)
 +{
 +       unsigned long addr = APB_SPECIAL_BASE + PBM_PCI_TARGET_AS;
 +
 +       asm("stxa %0, [%1] 0x15\n\t"
 +               : : "r" (val), "r" (addr) : "memory");
 +}
 +
   static void cpu_generic_init(const struct cpudef *cpu, uint32_t
 clock_frequency) {
           unsigned long iu_version;
 @@ -574,6 +588,10 @@ arch_init( void )
       modules_init();
   #ifdef CONFIG_DRIVER_PCI
                   ob_pci_init();
 +
 +               /* Set TAS register to match the virtual-dma properties
 +                     set during sabre configure */
 +               sparc64_set_tas_register(PBM_PCI_TARGET_AS_CD_ENABLE);
   #endif
                   nvconf_init();
                   device_end();
 -- 
 1.7.10.4
 
 
 -- 
 OpenBIOS                                 http://openbios.org/
 Mailinglist:   http://lists.openbios.org/mailman/listinfo
 Free your System - May the Forth be with you

[Artyom Tarasenko]

Acked-by: Artyom Tarasenko <atar4qemu(a)gmail.com>

On Sat, Sep 13, 2014 at 10:15 AM, Mark Cave-Ayland
<mark.cave-ayland(a)ilande.co.uk> wrote:
  Make sure that we declare the same range available as
set by the virtual-dma
 properties hardcoded in sabre_configure().

 This register is checked by FreeBSD during boot which panics if it finds a
 default (zero) value.

 Signed-off-by: Mark Cave-Ayland <mark.cave-ayland(a)ilande.co.uk>
 ---
  openbios-devel/arch/sparc64/openbios.c |   18 ++++++++++++++++++
  1 file changed, 18 insertions(+)

 diff --git a/openbios-devel/arch/sparc64/openbios.c
b/openbios-devel/arch/sparc64/openbios.c
 index 9cc1ac2..3a36146 100644
 --- a/openbios-devel/arch/sparc64/openbios.c
 +++ b/openbios-devel/arch/sparc64/openbios.c
 @@ -116,6 +116,20 @@ sparc64_reset_all(void)
          : : "r" (val), "r" (addr) : "memory");
  }

 +/* PCI Target Address Space Register (see UltraSPARC IIi User's Manual
 +  section 19.3.0.4) */
 +#define PBM_PCI_TARGET_AS              0x2028
 +#define PBM_PCI_TARGET_AS_CD_ENABLE    0x40
 +
 +static void
 +sparc64_set_tas_register(unsigned long val)
 +{
 +    unsigned long addr = APB_SPECIAL_BASE + PBM_PCI_TARGET_AS;
 +
 +    asm("stxa %0, [%1] 0x15\n\t"
 +        : : "r" (val), "r" (addr) : "memory");
 +}
 +
  static void cpu_generic_init(const struct cpudef *cpu, uint32_t clock_frequency)
  {
      unsigned long iu_version;
 @@ -574,6 +588,10 @@ arch_init( void )
         modules_init();
  #ifdef CONFIG_DRIVER_PCI
          ob_pci_init();
 +
 +        /* Set TAS register to match the virtual-dma properties
 +           set during sabre configure */
 +        sparc64_set_tas_register(PBM_PCI_TARGET_AS_CD_ENABLE);
  #endif
          nvconf_init();
          device_end();
 --
 1.7.10.4


-- 
Regards,
Artyom Tarasenko

linux/sparc and solaris/sparc under qemu blog:
http://tyom.blogspot.com/search/label/qemu