r807 - dev/olpc/cafenand

Author: wmb
Date: 2008-02-01 05:07:00 +0100 (Fri, 01 Feb 2008)
New Revision: 807

Modified:
   dev/olpc/cafenand/selftest.fth
Log:
OLPC CaFe NAND driver - changed the name of the "erase" selftest method
to "erase!" because there is a standard Forth word named "erase".

Modified: dev/olpc/cafenand/selftest.fth
===================================================================
--- dev/olpc/cafenand/selftest.fth	2008-02-01 04:05:35 UTC (rev 806)
+++ dev/olpc/cafenand/selftest.fth	2008-02-01 04:07:00 UTC (rev 807)
@@ -133,7 +133,7 @@
 ;

\ Destroy content of flash.  No argument.
-: erase  ( subarg$ -- )  2drop  ." Erasing..." cr  wipe  ;
+: erase!  ( subarg$ -- )  2drop  ." Erasing..." cr  wipe  ;

\ Destroy content of flash.  Argument is hex byte pattern value.
 : .skip-bad  ( page# -- )  (cr ." Skip bad block" .page-byte cr  ;
@@ -249,7 +249,7 @@
    ." <arg> can be one of the following:" cr
    ."   none           to do nothing" cr
    ."   help           to get this usage guide" cr
-   ."   erase          to erase the flash (destructive)" cr
+   ."   erase!         to erase the flash (destructive)" cr
    ."   fill[,<data>]  to fill the flash with hex byte pattern <data> (destructive)" cr
    ."                  Default <data> is 00" cr
    ."   fast[,<#blk>]  to non-destructively test the specified <#blk> of flash" cr