[OpenBIOS] [commit] r1312 - trunk/openbios-devel/drivers

[repository service]

Author: mcayland
Date: Mon Aug  4 19:40:39 2014
New Revision: 1312
URL: http://tracker.coreboot.org/trac/openbios/changeset/1312

Log:
SPARC64: switch to using interrupt-map property for interrupt pins

Instead of wiring the interrupt pins directly on the device, follow the PCI
bindings specification by storing the PCI interrupt pin on the device and then
using a combination of interrupt-map and interrupt-map-mask properties to
generate the final interrupt pin.

Signed-off-by: Mark Cave-Ayland

Modified:
   trunk/openbios-devel/drivers/pci.c

Modified: trunk/openbios-devel/drivers/pci.c
==============================================================================
--- trunk/openbios-devel/drivers/pci.c	Mon Aug  4 19:40:36 2014	(r1311)
+++ trunk/openbios-devel/drivers/pci.c	Mon Aug  4 19:40:39 2014	(r1312)
@@ -414,6 +414,10 @@
    set_property(dev, "bus-range", (char *)props, 2 * sizeof(props[0]));
 }

+/* Convert device/irq pin to interrupt property */
+#define SUN4U_INTERRUPT(dev, irq_pin) \
+            ((((dev >> 11) << 2) + irq_pin - 1) & 0x1f)
+
 static void pci_host_set_interrupt_map(const pci_config_t *config)
 {
 /* XXX We currently have a hook in the MPIC init code to fill in its handle.
@@ -454,19 +458,27 @@
    set_property(dev, "interrupt-map-mask", (char *)props, 4 * sizeof(props[0]));
 #elif defined(CONFIG_SPARC64)
    phandle_t dev = get_cur_dev();
-	uint32_t props[5];
+	uint32_t props[12];
+	int ncells, device, i;
+
+	/* Set interrupt-map for devices 4 (NE2000) and 5 (CMD646) */
+	ncells = 0;
+	for (i = 4; i <= 5; i++) {
+		device = i << 11;

-	props[0] = 0x000001fe;
-	props[1] = 0x020003f8;
-	props[2] = 1;
-	props[3] = find_dev("/");
-	props[4] = 0x2b;
-	set_property(dev, "interrupt-map", (char *)props, 5 * sizeof(props[0]));
-
-	props[0] = 0x000001ff;
-	props[1] = 0xffffffff;
-	props[2] = 3;
-	set_property(dev, "interrupt-map-mask", (char *)props, 3 * sizeof(props[0]));
+		ncells += pci_encode_phys_addr(props + ncells, 0, 0, device, 0, 0);
+		props[ncells++] = 1;
+		props[ncells++] = get_cur_dev();
+		props[ncells++] = SUN4U_INTERRUPT(device, 1);
+	}
+
+	set_property(dev, "interrupt-map", (char *)props, ncells * sizeof(props[0]));
+
+	props[0] = 0x0000f800;
+	props[1] = 0x0;
+	props[2] = 0x0;
+	props[3] = 7;
+	set_property(dev, "interrupt-map-mask", (char *)props, 4 * sizeof(props[0]));
 #endif
 }

@@ -960,10 +972,7 @@
    	OLDWORLD(set_int_property(dev, "AAPL,interrupts",
    				  config->irq_line));
 #if defined(CONFIG_SPARC64)
-                /* direct mapping bssnn (Bus, Slot, interrupt Number */
-                set_int_property(get_cur_dev(), "interrupts",
-                                 ((((config->dev >> 11) << 2)
-                                   + config->irq_pin - 1) & 0x1f));
+                set_int_property(dev, "interrupts", config->irq_pin);
 #else
    	NEWWORLD(set_int_property(dev, "interrupts", config->irq_pin));
 #endif