On Dec 31, 2017, at 7:59 AM, Jd Lyons lyons_dj@yahoo.com wrote:
On Dec 30, 2017, at 6:04 AM, Segher Boessenkool <segher@kernel.crashing.org mailto:segher@kernel.crashing.org> wrote:
On Sat, Dec 30, 2017 at 05:44:10AM -0500, Jd Lyons wrote:
On Dec 30, 2017, at 4:21 AM, Segher Boessenkool <segher@kernel.crashing.org mailto:segher@kernel.crashing.org> wrote: On Fri, Dec 29, 2017 at 08:27:54PM -0500, Tarl Neustaedter wrote:
[re-send, copying the list. For whatever reason, it seems messages aren't getting the reply-to: header.]
On 2017-Dec-29 03:58 , Jd Lyons wrote:
0 > " /pci/@e" open-dev to my-self ok 0 > my-self . 5fc5ac34 ok 0 > my-parent . 5fc5abfc ok 0 > my-space . 0 ok <<---Seems my-space isn't returning a correct value? 0 >
That's the problem. It appears that simply open-dev and assigning my-self isn't enough. my-space (and my-address and my-unit) aren't getting set up, so all config-space accesses are going to do the wrong thing (they'll go to device 0, which may or may not be the root).
In the Sun/Oracle version, select would properly set things up, it appears no equivalent is available under openbios.
I think you'll have to further debug this by getting the FCode to be pulled in at startup in place of the built-in vga fcode, rather than trying to fiddle things this way.
Or set my-space to return 7000 and keep on fumbling :-)
How would I set my-space to 7000?
Is that specific to pci/@e?
I noticed in SLOF that my-space . returned 1800, however the card was pci/@3.
And that is correct :-)
It is @dev,fn or if fn is 0, it is written as @dev . In the encoded representation, it is 800*dev + 100*fn (dev is 5 bits, fn is 3 bits).
In openbios, it looks like my-space gets its data from >dn.probe-addr in the device node... And it is set via set-args... And then I got lost, not sure how that is supposed to be called.
Looks like we need to change the way openbios handles my-space.
SLOF deals with it in the nodes.fs
: (my-phandle) ( -- phandle ) my-self ?dup IF ihandle>phandle ELSE get-node dup 0= ABORT" no active node" THEN ;
: my-space ( -- phys.hi ) (my-phandle) >space ;
I think we also need the >space word, the phandle word, and the ihandle word, I’ll have to track that down too.
John, do you want to take a crack at fixing the >dn.probe-addr, or replacing it with something that returns a correct my-space .?
Looks lie Openbios already deals with ihandle and phandle, they just are not global words, and they may not need to be for my purpose.
They aren’t global words in SLOF, so as long as the compiler understands them a build time, they should work just fine.
Segher