[OpenBIOS] r595 - cpu/x86/pc/olpc

Author: wmb
Date: 2007-08-31 09:52:04 +0200 (Fri, 31 Aug 2007)
New Revision: 595

Modified:
   cpu/x86/pc/olpc/setwp.fth
Log:
Added clear-wp capability.

Modified: cpu/x86/pc/olpc/setwp.fth
===================================================================
--- cpu/x86/pc/olpc/setwp.fth	2007-08-31 07:45:02 UTC (rev 594)
+++ cpu/x86/pc/olpc/setwp.fth	2007-08-31 07:52:04 UTC (rev 595)
@@ -3,6 +3,10 @@
 \ should not be necessary once mass production systems start coming from
 \ the factor with the "wp" tag set.

+\ You can turn "ww" into "wp" just by clearing bits, which doesn't
+\ require a full erase.  That is faster and safer than copying out the
+\ data, erasing the block and rewriting it.
+
 : set-wp  ( -- )
    h# fffefffe 2  " wp"  $=  if  ." wp is already set" cr  exit  then
    h# fffefffe 2  " ww"  $=  0=  abort" No ww tag"
@@ -11,3 +15,49 @@
    h# fffefffe 2  " wp"  $=  if  ." Succeeded" cr  then
    spi-reprogrammed
 ;
+
+\ Set and clear the write-protect tag by copying, erasing, rewriting
+
+\ Read mfg data from FLASH to RAM
+: get-mfg-data  ( -- )
+   rom-pa mfg-data-offset +  mfg-data-buf  /flash-block lmove
+;
+
+\ Write mfg data from RAM to FLASH
+: put-mfg-data  ( -- )
+   spi-start spi-identify
+   mfg-data-buf  mfg-data-end-offset mfg-data-offset  write-flash-range
+;
+
+\ Find RAM address of tag, given FLASH address
+: tag>ram-adr  ( adr len -- ram-adr )
+   drop 2+                      ( adr' )   \ Address of  "ww" tag
+   rom-pa mfg-data-offset +  -  ( offset )
+
+   dup /flash-block u>= abort" Bad ww offset"        \ Sanity check
+
+   mfg-data-buf +               ( ram-adr )
+;
+
+\ Get ready to modify the tag whose name is tag$
+: mfg-data-setup  ( tag$ -- ram-adr )
+   get-mfg-data
+   2dup  find-tag  0=  if  ." No " type ."  tag" cr  abort  then  ( tag$ adr len )
+   tag>ram-adr  >r                            ( tag$ r: ram-adr )
+   r@ 2 $=  0= abort" Tag mismatch in RAM"    ( r: ram-adr )
+   r>
+;
+
+\ Change the "ww" tag to "wp"
+: hard-set-wp  ( -- )
+   " ww" mfg-data-setup  ( ram-adr )
+   [char] p  swap 1+ c!  ( )
+   put-mfg-data
+;
+
+\ Change the "wp" tag to "ww"
+: clear-wp  ( -- )
+   " wp" mfg-data-setup  ( ram-adr )
+   [char] w  swap 1+ c!  ( )
+   put-mfg-data
+;