On Dec 30, 2017, at 6:04 AM, Segher Boessenkool segher@kernel.crashing.org wrote:
On Sat, Dec 30, 2017 at 05:44:10AM -0500, Jd Lyons wrote:
On Dec 30, 2017, at 4:21 AM, Segher Boessenkool segher@kernel.crashing.org wrote: On Fri, Dec 29, 2017 at 08:27:54PM -0500, Tarl Neustaedter wrote:
[re-send, copying the list. For whatever reason, it seems messages aren't getting the reply-to: header.]
On 2017-Dec-29 03:58 , Jd Lyons wrote:
0 > " /pci/@e" open-dev to my-self ok 0 > my-self . 5fc5ac34 ok 0 > my-parent . 5fc5abfc ok 0 > my-space . 0 ok <<---Seems my-space isn't returning a correct value? 0 >
That's the problem. It appears that simply open-dev and assigning my-self isn't enough. my-space (and my-address and my-unit) aren't getting set up, so all config-space accesses are going to do the wrong thing (they'll go to device 0, which may or may not be the root).
In the Sun/Oracle version, select would properly set things up, it appears no equivalent is available under openbios.
I think you'll have to further debug this by getting the FCode to be pulled in at startup in place of the built-in vga fcode, rather than trying to fiddle things this way.
Or set my-space to return 7000 and keep on fumbling :-)
How would I set my-space to 7000?
Is that specific to pci/@e?
I noticed in SLOF that my-space . returned 1800, however the card was pci/@3.
And that is correct :-)
It is @dev,fn or if fn is 0, it is written as @dev . In the encoded representation, it is 800*dev + 100*fn (dev is 5 bits, fn is 3 bits).
In openbios, it looks like my-space gets its data from >dn.probe-addr in the device node... And it is set via set-args... And then I got lost, not sure how that is supposed to be called.
Looks like we need to change the way openbios handles my-space.
SLOF deals with it in the nodes.fs
: (my-phandle) ( -- phandle ) my-self ?dup IF ihandle>phandle ELSE get-node dup 0= ABORT" no active node" THEN ;
: my-space ( -- phys.hi ) (my-phandle) >space ;
I think we also need the >space word, the phandle word, and the ihandle word, I’ll have to track that down too.
John, do you want to take a crack at fixing the >dn.probe-addr, or replacing it with something that returns a correct my-space .?
Segher