"Larry G. Linde" wrote:
We are working on a 540 design at present and need to start porting to the 540/950 chipset.
However we have not been able to find any off the shelf MB's with the 540 yet. If you could get Us the name of a existing 540 MB with the 950 that we could buy that would help a lot. Also And code/doc info in setup that required on the 540/950 would help as well.
If you would like I will be in TW in about 2 weeks. I can stop by and say hello and show you What we are doing.
-larry
First of all, it is amazing (from our point of view) that without official support you could do such chip init stuff so clean, how did you do this ??
As you know we are working with FreeBIOS/LinuxBIOS project, we are also intrested in any similiar projects too. We will provide any support we can, we will provide you the necessary documents, BIOS source/pseudo code and hardware demo boards. As posted by Jeff Garzik et. al. on freebios list we think there is possibility to cooperate/merge these free bios projects.
For 540+950 issue, there are two things to note. First is that, from business point of view, it seems that 540 chipset will not in mass production in the near future so it would be very difficult to find a 540 M/B in the market. We are rather focusing on 630 and the upcomming 730 series. As far as I know there is only WinFast 5400MA avaliable in Taiwan market.
The second is that, of course we want our whole product line fully supported. I am personally planing to have full support (i.e. boot from cold power up without BIOS) for the following combination in the end of August (possible ??)
630/540 single chip + 950 LPC 620/530 north + 5595 sourth + 6801 SuperIO
so we need somebody to "port" or try the current implementation on these different platforms.
Finally, it glad that you are going to visit Taiwan. If you have time, please arrange to visit SiS and demo your work. We can show you how/what we have done on LinuxBIOS side.
Ollie - To unsubscribe: send mail to majordomo@freiburg.linux.de with 'unsubscribe openbios' in the body of the message