Re: [OpenBIOS] Apple's Open Firmware.

[James Lyons]

On Mar 19, 2018, at 6:38 PM, Tarl Neustaedter wrote:
> On 2018-Mar-19 18:09 , James Lyons via OpenBIOS wrote:
> > [...]
> > " agp/@10" open-dev to my-self
> > load hd:12,\ppc\4600.rom
> > 800000 1 byte-load
> >
> > That all returns ok, but the FCode doesn't seem to execute.
> >
> > Also, I had to strip the PCI Header from the ROM to get the load  
> > command to work.
>
> Did the load bring the FCode in?

Thanks Tarl,

800000 100 dump returns the FCode, so that seems to be OK
> You don't want to strip out the PCI header, you want to chase the  
> pointer in the PCI header to where the FCode starts, and make the  
> byte-load command take that address (e.g., in the above, given the  
> file you sent, you'd start at 800040).

If I don't strip the header OF returns this to the load command:

unrecognized Client Program format

Same thing with:

boot hd:12,/ppc/4600.rom -h

unrecognized Client Program format

the -h tag should tell not to try and execute, just load, but that  
doesn't seem to work. Maybe Apple systems don't support it?

I stripped everything to 0x40 in the ROM to get it to load with the  
load command, I'm not sure how I can get it to load without doing that?
> The file you sent does seem to have FCode at offset 40; the "start1"  
> is an f1, so it's starting the way it should.