Le 22 déc. 08 à 07:22, Blue Swirl a écrit :
On 12/22/08, Laurent Vivier laurent@lvivier.info wrote:
Hi,
I've got my first oops under linux booted with OpenBIOS.
The kernel (2.6.28-rc9) was hanging into probe_machine() because it didn't recognize the machine.
The following patch correct this:
Thanks, applied as r305.
What kernel and command line have you been using? None of the install CD images I have tried are able to boot at all.
In fact, I've installed a debian sarge on an external disk drive with my iBook G4 and I use this image with qemu.
Then I cross-compile a linux kernel from GIT and I use yaboot (I've compiled it on x86_64) to update the disk image:
kpartx -a sarge-ppc.img mount /dev/mapper/loop0p3 mnt cp linux-2.6/vmlinux mnt/boot/vmlinux-2.6-test sudo umount mnt yaboot-1.3.14/ybin/ybin -o hd:2 -b /dev/mapper/loop0p2 --config yaboot.conf --nonvram kpartx -d /dev/loop0
My yaboot.conf is:
boot=/dev/hda2 device=hd: partition=3 root=/dev/hda3 timeout=5000 install=yaboot-1.3.14/second/yaboot magicboot=yaboot-1.3.14/first/ofboot enablecdboot
image=/boot/vmlinux-2.6-test label=Linux-test read-only append="console=ttyS0"
image=/boot/vmlinux label=Linux read-only initrd=/boot/initrd.img append="console=ttyS0"
image=/boot/vmlinux.old label=old read-only initrd=/boot/initrd.img.old
On an install CD there is a forth script which start yaboot with good parameters but currently OpenBIOS is not able to decode this script (inside XML tags).
Regards, Laurent ----------------------- Laurent Vivier ---------------------- "The best way to predict the future is to invent it." - Alan Kay