Hi,
this is the POST code order of my Phoenix BIOS:
02 c8 c9 24 04 06 18 07 08 c4 11 0e 0c 16 17 28 3a 2a 2c 2e 2f 38 20 29 33 c1 09 0a 0b 0f 10 14 1a 1c 22 32 67 69 6b 3c 3d 42 46 45 47 49 c6 c5 48 4a 4c 24 59 cc 55 52 54 76 58 41 4b 4e 50 51 9d 5a 5b 5c 60 62 64 66 68 6a 6c 6e 70 72 4f 7c 7d 7e 80 ca 88 8a 81 87 85 82 84 86 83 89 8c cb cd 90 8b 95 92 b6 98 93 9c c7 9e a0 a2 a4 c3 ba c3 a8 aa ac ae b0 b2 b4 b5 be b6 bc b7 bd bf 8f 91 9f 97 99 b1 b9 c0
Marcus
-----Original Message----- From: David Christensen Sent: Monday, February 14, 2000 6:26 PM To: openbios@elvis.informatik.uni-freiburg.de Subject: RE: [OpenBIOS] suggestion on ordering things
If you're looking for an idea on what to do during BIOS power-on self-test (POST) you may start with this link: http://www.phoenix.com/pcuser/userman.pdf
Starting on page 35 you'll get a listing of POST codes and approximately what occurs at each code. Unfortunately the codes are listed in numerical order, not the order that they occur, but you should be able to figure out which codes require RAM and which don't. Memory sizing occurs at POST code 28h, then you probably want to initialize RAM very soon afterwards by writing a known value to every memory location to clear up any parity/ECC errors that may be present because the contents of DRAM are not known at power-up.
Dave
-----Original Message----- From: owner-openbios@elvis.informatik.uni-freiburg.de [mailto:owner-openbios@elvis.informatik.uni-freiburg.de]On Behalf Of Ronald G. Minnich Sent: Monday, February 14, 2000 7:37 AM To: openbios@elvis.informatik.uni-freiburg.de Subject: [OpenBIOS] suggestion on ordering things
I think memory startup should happen first or early. On the new machines you can't use ram til you power on memory.
ron
To unsubscribe: send mail to majordomo@freiburg.linux.de with 'unsubscribe openbios' in the body of the message
To unsubscribe: send mail to majordomo@freiburg.linux.de with 'unsubscribe openbios' in the body of the message
- To unsubscribe: send mail to majordomo@freiburg.linux.de with 'unsubscribe openbios' in the body of the message