Author: stepan Date: 2009-12-02 12:40:32 +0100 (Wed, 02 Dec 2009) New Revision: 81
Modified: trunk/qemu-0.11.0/hw/pc.c trunk/qemu-0.11.0/serialice.c Log: This is a somewhat important bug fix: * Add back the SerialICE "machine", so it's necessary to run Qemu with -M serialice again. This time the machine does not emulate half a PC without actually using it. The only registered "device" is the ROM. This is a much better fix than artificially marking actually allocated memory IO_MEM_UNASSIGNED (thus preventing Qemu from ever accessing it.) * Drop all changes made to hw/pc.c.. This makes SerialICE a little less intrusive. * Activate splash screen on first virtual console in SerialICE mode.
Modified: trunk/qemu-0.11.0/hw/pc.c =================================================================== --- trunk/qemu-0.11.0/hw/pc.c 2009-12-02 11:20:29 UTC (rev 80) +++ trunk/qemu-0.11.0/hw/pc.c 2009-12-02 11:40:32 UTC (rev 81) @@ -23,7 +23,6 @@ */ #include "hw.h" #include "pc.h" -#include "serialice.h" #include "fdc.h" #include "pci.h" #include "block.h" @@ -1153,10 +1152,6 @@
/* allocate RAM */ ram_addr = qemu_ram_alloc(0xa0000); -#ifdef CONFIG_SERIALICE - if (serialice_active) - ram_addr |= IO_MEM_UNASSIGNED; -#endif cpu_register_physical_memory(0, 0xa0000, ram_addr);
/* Allocate, even though we won't register, so we don't break the @@ -1165,10 +1160,6 @@ */ ram_addr = qemu_ram_alloc(0x100000 - 0xa0000); ram_addr = qemu_ram_alloc(below_4g_mem_size - 0x100000); -#ifdef CONFIG_SERIALICE - if (serialice_active) - ram_addr |= IO_MEM_UNASSIGNED; -#endif cpu_register_physical_memory(0x100000, below_4g_mem_size - 0x100000, ram_addr); @@ -1179,10 +1170,6 @@ hw_error("To much RAM for 32-bit physical address"); #else ram_addr = qemu_ram_alloc(above_4g_mem_size); -#ifdef CONFIG_SERIALICE - if (serialice_active) - ram_addr |= IO_MEM_UNASSIGNED; -#endif cpu_register_physical_memory(0x100000000ULL, above_4g_mem_size, ram_addr);
Modified: trunk/qemu-0.11.0/serialice.c =================================================================== --- trunk/qemu-0.11.0/serialice.c 2009-12-02 11:20:29 UTC (rev 80) +++ trunk/qemu-0.11.0/serialice.c 2009-12-02 11:40:32 UTC (rev 81) @@ -45,9 +45,19 @@ /* Local includes */ #include "hw/hw.h" #include "hw/pc.h" +#include "hw/boards.h" +#include "console.h" #include "serialice.h" #include "sysemu.h"
+#define SERIALICE_BANNER 1 +#if SERIALICE_BANNER +#include "serialice_banner.h" +#endif + +#define DEFAULT_RAM_SIZE 128 +#define BIOS_FILENAME "bios.bin" + #define SERIALICE_DEBUG 3 #define BUFFER_SIZE 1024 typedef struct { @@ -56,6 +66,7 @@ #else int fd; #endif + DisplayState *ds; char *buffer; char *command; } SerialICEState; @@ -904,19 +915,65 @@ return (write_to_qemu == 0); }
+static int screen_invalid = 1; + +static void serialice_refresh(void *opaque) +{ + uint8_t *dest; + int bpp, linesize; + + if (!screen_invalid) { + return; + } + + dest = ds_get_data(s->ds); + bpp = (ds_get_bits_per_pixel(s->ds) + 7) >> 3; + linesize = ds_get_linesize(s->ds); + + memset(dest, 0x00, linesize * ds_get_height(s->ds)); +#if SERIALICE_BANNER + int x, y; + if (bpp == 4) { + for (y = 0; y < 240; y++) { + for (x = 0; x < 320; x++) { + int doff = (y * linesize) + (x * bpp); + int soff = (y * (320 * 3)) + (x * 3); + dest[doff + 0] = serialice_banner[soff + 2]; // blue + dest[doff + 1] = serialice_banner[soff + 1]; // green + dest[doff + 2] = serialice_banner[soff + 0]; // red + } + } + } else { + printf("Banner enabled and BPP = %d (line size = %d)\n", bpp, linesize); + } +#endif + + dpy_update(s->ds, 0, 0, ds_get_width(s->ds), ds_get_height(s->ds)); + screen_invalid = 0; +} + +static void serialice_invalidate(void *opaque) +{ + screen_invalid = 1; +} + // ************************************************************************** // initialization and exit
void serialice_init(void) { + s = qemu_mallocz(sizeof(SerialICEState)); + + s->ds = graphic_console_init(serialice_refresh, serialice_invalidate, + NULL, NULL, s); + qemu_console_resize(s->ds, 320, 240); + printf("SerialICE: Open connection to target hardware...\n");
if (serialice_device == NULL) { printf("You need to specify a serial device to use SerialICE.\n"); exit(1); } - - s = qemu_mallocz(sizeof(SerialICEState)); #ifdef WIN32 s->fd = CreateFile(serialice_device, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL); @@ -1029,5 +1086,99 @@ qemu_free(s); }
-device_init(serialice_init) -// no exit function +static void pc_init_serialice(ram_addr_t ram_size, + const char *boot_device, + const char *kernel_filename, + const char *kernel_cmdline, + const char *initrd_filename, + const char *cpu_model) +{ + char *filename; + int ret, i, linux_boot; + int isa_bios_size, bios_size; + ram_addr_t bios_offset; + CPUState *env; + + if (ram_size != (DEFAULT_RAM_SIZE * 1024 * 1024)) { + printf + ("Warning: Running SerialICE with non-default ram size is not supported.\n"); + exit(1); + } + + linux_boot = (kernel_filename != NULL); + + /* init CPUs */ + if (cpu_model == NULL) { + printf + ("Warning: Running SerialICE with generic CPU type might fail.\n"); +#ifdef TARGET_X86_64 + cpu_model = "qemu64"; +#else + cpu_model = "qemu32"; +#endif + } + + for (i = 0; i < smp_cpus; i++) { + env = cpu_init(cpu_model); + } + + /* Must not happen before CPUs are initialized */ + serialice_init(); + + /* BIOS load */ + if (bios_name == NULL) + bios_name = BIOS_FILENAME; + filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); + if (filename) { + bios_size = get_image_size(filename); + } else { + bios_size = -1; + } + if (bios_size <= 0 || (bios_size % 65536) != 0) { + goto bios_error; + } + bios_offset = qemu_ram_alloc(bios_size); + ret = load_image(filename, qemu_get_ram_ptr(bios_offset)); + if (ret != bios_size) { + bios_error: + fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", bios_name); + exit(1); + } + if (filename) { + qemu_free(filename); + } + /* map the last 128KB of the BIOS in ISA space */ + isa_bios_size = bios_size; + if (isa_bios_size > (128 * 1024)) + isa_bios_size = 128 * 1024; + + cpu_register_physical_memory(0x100000 - isa_bios_size, + isa_bios_size, + (bios_offset + bios_size - + isa_bios_size) | IO_MEM_ROM); + + /* map all the bios at the top of memory */ + cpu_register_physical_memory((uint32_t) (-bios_size), bios_size, + bios_offset | IO_MEM_ROM); + if (linux_boot) { + printf("Booting Linux in SerialICE mode is currently not supported.\n"); + exit(1); + } + +} + +static QEMUMachine serialice_machine = { + .name = "serialice-x86", + .alias = "serialice", + .desc = "SerialICE Debugger", + .init = pc_init_serialice, + .max_cpus = 255, + //.is_default = 1, +}; + +static void serialice_machine_init(void) +{ + qemu_register_machine(&serialice_machine); +} + +machine_init(serialice_machine_init);
-
svn＠coresystems.de