My problem is two-fold:
1) Running the patched qemu segfaults.
$ sudo ./i386-softmmu/qemu -serialice /dev/ttyUSB0 -hda /dev/zero -L bios/ [sudo] password for idwer: SerialICE: Open connection to target hardware... SerialICE: Waiting for handshake with target... target alife! SerialICE: LUA init... SerialICE: Starting LUA script SerialICE: Registering physical memory areas for Cache-As-Ram: Registering physical memory at 0xffd80000 (0x00080000 bytes) Segmentation fault
Reproduced using gdb:
$ sudo gdb --args ./i386-softmmu/qemu -serialice /dev/ttyUSB0 -hda /dev/zero -L bios/ GNU gdb (GDB) 7.1-ubuntu Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu". For bug reporting instructions, please see: http://www.gnu.org/software/gdb/bugs/... Reading symbols from /home/idwer/coreboot/serialice/qemu-0.11.0/i386-softmmu/qemu...done. (gdb) run Starting program: /home/idwer/coreboot/serialice/qemu-0.11.0/i386-softmmu/qemu -serialice /dev/ttyUSB0 -hda /dev/zero -L bios/ [Thread debugging using libthread_db enabled] SerialICE: Open connection to target hardware... SerialICE: Waiting for handshake with target... target alife! SerialICE: LUA init... SerialICE: Starting LUA script SerialICE: Registering physical memory areas for Cache-As-Ram: Registering physical memory at 0xffd80000 (0x00080000 bytes)
Program received signal SIGSEGV, Segmentation fault. cpu_register_physical_memory_offset (start_addr=4292345856, size=524288, phys_offset=0, region_offset=0) at /home/idwer/coreboot/serialice/qemu-0.11.0/exec.c:2327 2327 if (env->kqemu_enabled) { (gdb)
2) Right now, the serialice shell appears only once: after flashing serialice.rom and performing a soft reset from vendor bios to serialice.
SerialICE v1.5 (Aug 3 2010)
---
mainboard/asrock_p4i65gv.c:
const char boardname[33]="ASRock P4i65GV ";
#define SUPERIO_CONFIG_PORT 0x2e
/* Hardware specific functions */ static void mainboard_set_ich5(void) { /* coma is 0x3f8 , comb is 0x2f8 */ pci_write_config8(PCI_ADDR(0, 0x1f, 0, 0xe0), 0x10); }
static void superio_init(void) { pnp_enter_ext_func_mode( SUPERIO_CONFIG_PORT); pnp_set_logical_device(SUPERIO_CONFIG_PORT, 2); // COM-A pnp_set_enable(SUPERIO_CONFIG_PORT, 0); // disable it, then... pnp_set_iobase0(SUPERIO_CONFIG_PORT, 0x3f8); pnp_set_irq0(SUPERIO_CONFIG_PORT, 4); pnp_set_enable(SUPERIO_CONFIG_PORT, 1); // ...enable it ? pnp_exit_ext_func_mode(SUPERIO_CONFIG_PORT); }
static void chipset_init(void) { mainboard_set_ich5(); superio_init(); }
---
lspci -nnvvvxxx:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) Subsystem: ASRock Incorporation Device [1849:2570] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fe800000 (32-bit, prefetchable) [size=4M] Capabilities: [e4] Vendor Specific Information: Len=06 <?> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00: 86 80 70 25 06 00 90 20 02 00 00 06 00 00 00 00 10: 08 00 80 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 70 25 30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 34 00 40 80 1c 00 00 00 00 00 00 00 00 00 60: 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 10 11 01 00 00 33 33 00 00 00 00 00 00 0a 38 00 a0: 02 00 30 00 17 42 00 1f 00 00 00 00 00 00 00 00 b0: 00 00 00 00 3f 00 00 00 00 00 00 00 20 10 00 00 c0: 00 00 00 00 80 1f 0e 24 00 01 00 00 00 00 00 00 d0: 02 28 04 0e 0b 0d 00 00 00 00 00 00 00 00 40 01 e0: 00 00 00 00 09 00 06 11 00 02 00 00 00 00 00 00 f0: 00 00 00 00 02 00 00 00 68 0f 03 00 00 00 00 00
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Device [1849:2572] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at fe780000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at ec00 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: i915 Kernel modules: i915 00: 86 80 72 25 07 00 90 00 02 00 00 03 00 00 00 00 10: 08 00 00 f0 00 00 78 fe 01 ec 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 72 25 30: 00 00 00 00 d0 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 e0 23 e0 11 00 00 00 00 00 00 00 00 50: 00 00 34 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 01 02 ff 00 00 00 71 02 10 20 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 55 ff ff 55 ff ff 00 00 b0: 08 04 41 00 30 08 04 00 85 21 ff df b2 40 68 00 c0: 00 00 00 00 80 1f 0e 24 00 00 00 00 00 00 00 00 d0: 01 00 21 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 01 00 00 00 09 00 06 11 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 68 0f 03 00 00 00 00 00
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K] 00: 86 80 76 25 02 00 80 00 02 00 80 08 00 00 00 00 10: 00 00 cf fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 43 65 10 04 00 00 00 00 04 00 00 00 00 00 00 00 50: 01 00 80 00 02 01 80 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 55 05 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 08 00 b0: 00 00 00 00 f0 43 fc 7d 01 00 00 00 09 00 00 00 c0: 00 08 00 00 20 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 ff ff ff ff ff ff ff 3f e0: 01 00 00 00 00 00 01 02 ff 0e 00 00 00 00 04 00 f0: 00 0c 02 00 00 00 00 00 68 0f 03 00 74 f8 00 00
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASRock Incorporation Device [1849:24d0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at dc00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 d2 24 05 00 80 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 dc 00 00 00 00 00 00 00 00 00 00 49 18 d0 24 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASRock Incorporation Device [1849:24d0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e000 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 d4 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 e0 00 00 00 00 00 00 00 00 00 00 49 18 d0 24 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASRock Incorporation Device [1849:24d0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 d7 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 e4 00 00 00 00 00 00 00 00 00 00 49 18 d0 24 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASRock Incorporation Device [1849:24d0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 de 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 e8 00 00 00 00 00 00 00 00 00 00 49 18 d0 24 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASRock Incorporation Device [1849:24d0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at fe77bc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00: 86 80 dd 24 06 01 90 02 02 20 03 0c 00 00 00 00 10: 00 bc 77 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 d0 24 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00 60: 20 20 ff 01 00 00 00 00 01 00 00 00 00 00 08 c0 70: 00 00 dd 3f 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 55 55 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 80 00 00 88 83 40 00 66 0f 05 00 06 14 00 00
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fe500000-fe5fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00: 86 80 4e 24 07 01 80 00 c2 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 b0 b0 80 02 20: 50 fe 50 fe f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 40: 02 28 30 76 00 00 00 00 00 00 00 00 00 00 00 00 50: 02 64 73 00 00 00 00 00 50 01 34 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 02 00 00 00 c0 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 51 33
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00: 86 80 d0 24 0f 00 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 08 00 00 10 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 81 04 00 00 10 00 00 00 60: 8a 86 85 83 d0 00 00 00 80 80 85 8b 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 20 02 00 00 39 00 00 00 0d 00 00 00 00 03 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 86 21 02 00 02 00 00 00 04 00 00 00 00 00 00 00 e0: 00 00 00 80 00 00 08 14 33 22 11 00 00 00 67 45 f0: 00 00 44 00 04 00 00 00 66 0f 05 3e 00 00 00 00
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: ASRock Incorporation Device [1849:24d0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fc00 [size=16] Region 5: Memory at 1f800000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix Kernel modules: ata_piix, piix 00: 86 80 db 24 07 00 80 02 02 8a 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 fc 00 00 00 00 80 1f 00 00 00 00 49 18 d0 24 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40: 07 e3 77 e3 b0 00 00 00 0d 00 01 22 00 00 00 00 50: 00 00 00 00 30 10 00 00 00 00 00 00 00 00 00 00 60: 08 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02) Subsystem: ASRock Incorporation Device [1849:24d0] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 04 00 00 00 00 00 00 00 00 00 00 49 18 d0 24 30: 00 00 00 00 00 00 00 00 00 00 00 00 06 02 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02) Subsystem: ASRock Incorporation Device [1849:9739] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at d800 [size=256] Region 1: I/O ports at d400 [size=64] Region 2: Memory at fe77b800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at fe77b400 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 00: 86 80 d5 24 07 00 90 02 02 00 01 04 00 00 00 00 10: 01 d8 00 00 01 d4 00 00 00 b8 77 fe 00 b4 77 fe 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 39 97 30: 00 00 00 00 50 00 00 00 00 00 00 00 06 02 00 00 40: 09 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00
01:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: ASRock Incorporation Device [1849:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at b800 [size=256] Region 1: Memory at fe5ffc00 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: 8139too Kernel modules: 8139too, 8139cp 00: ec 10 39 81 07 00 90 02 10 00 00 02 00 20 00 00 10: 01 b8 00 00 00 fc 5f fe 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 39 81 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 20 40 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 c2 f7 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
On Tue, Aug 3, 2010 at 10:59 AM, Idwer Vollering vidwer@gmail.com wrote:
My problem is two-fold:
- Running the patched qemu segfaults.
$ sudo ./i386-softmmu/qemu -serialice /dev/ttyUSB0 -hda /dev/zero -L bios/ [sudo] password for idwer: SerialICE: Open connection to target hardware... SerialICE: Waiting for handshake with target... target alife!
try the latest qemu in the SerialICE tree
svn://serialice.com/serialice/trunk/qemu-0.11.0
It's already patched, and it has been updated more recently than the patch.
- Right now, the serialice shell appears only once: after flashing
serialice.rom and performing a soft reset from vendor bios to serialice.
SerialICE v1.5 (Aug 3 2010)
Sounds like SerialICE is depending on some initialization from the vendor BIOS. I guess an ugly way to test it would be to copy the working configuration bits from lspci and hard code them into SerialICE until you find what's wrong.
Thanks, Myles
On Tue, Aug 3, 2010 at 1:08 PM, Stefan Reinauer stefan.reinauer@coresystems.de wrote:
On 8/3/10 8:35 PM, Myles Watson wrote:
$ sudo ./i386-softmmu/qemu -serialice /dev/ttyUSB0 -hda /dev/zero -L bios/
I think you also need to specify -M serialice.
Yes. The parameters changed from the patch to the tree version of qemu. I think we should retire the patch and let people generate their own from the tree, or find a way to keep it up to date automatically.
Myles
On 8/3/10 9:13 PM, Myles Watson wrote:
On Tue, Aug 3, 2010 at 1:08 PM, Stefan Reinauer stefan.reinauer@coresystems.de wrote:
On 8/3/10 8:35 PM, Myles Watson wrote:
$ sudo ./i386-softmmu/qemu -serialice /dev/ttyUSB0 -hda /dev/zero -L bios/
I think you also need to specify -M serialice.
Yes. The parameters changed from the patch to the tree version of qemu. I think we should retire the patch and let people generate their own from the tree, or find a way to keep it up to date automatically.
Myles
Absolutely. The mechanism that lets you create your own patch is "make diff" on the top level. It is called for every release, but not in between. So whenever using the SVN version of SerialICE you also have to use the SVN version of the coreboot tree or you will most likely run into odd trouble.
I had hoped that we could get rid of the "serialice" machine type, but except getting rid of another parameter it doesn't make a whole lot of sense.
Stefan
-----Original Message----- From: serialice-bounces+mylesgw=gmail.com@serialice.com [mailto:serialice- bounces+mylesgw=gmail.com@serialice.com] On Behalf Of Stefan Reinauer Sent: Tuesday, August 03, 2010 3:20 PM To: serialice@serialice.com Subject: Re: [SerialICE] Experiencing a qemu segfault and serialice accessibility problems
On 8/3/10 9:13 PM, Myles Watson wrote:
On Tue, Aug 3, 2010 at 1:08 PM, Stefan Reinauer stefan.reinauer@coresystems.de wrote:
On 8/3/10 8:35 PM, Myles Watson wrote:
$ sudo ./i386-softmmu/qemu -serialice /dev/ttyUSB0 -hda /dev/zero -L
bios/
I think you also need to specify -M serialice.
Yes. The parameters changed from the patch to the tree version of qemu. I think we should retire the patch and let people generate their own from the tree, or find a way to keep it up to date automatically.
Myles
Absolutely. The mechanism that lets you create your own patch is "make diff" on the top level. It is called for every release, but not in between. So whenever using the SVN version of SerialICE you also have to use the SVN version of the coreboot tree or you will most likely run into odd trouble.
Sorry to be dense. I missed that completely when I was coming up to speed with SerialICE.
I had hoped that we could get rid of the "serialice" machine type, but except getting rid of another parameter it doesn't make a whole lot of sense.
I agree.
Thanks, Myles
2010/8/3 Myles Watson mylesgw@gmail.com
On Tue, Aug 3, 2010 at 10:59 AM, Idwer Vollering vidwer@gmail.com wrote:
- Right now, the serialice shell appears only once: after flashing
serialice.rom and performing a soft reset from vendor bios to serialice.
SerialICE v1.5 (Aug 3 2010)
Sounds like SerialICE is depending on some initialization from the vendor BIOS. I guess an ugly way to test it would be to copy the working configuration bits from lspci and hard code them into SerialICE until you find what's wrong.
I'll investigate that by setting up the superio only.
If anyone wants to look at the serialice log produced by qemu, let me know.
Myles
Idwer
2010/8/3 Stefan Reinauer stefan.reinauer@coresystems.de
On 8/3/10 8:35 PM, Myles Watson wrote:
$ sudo .*/i386-softmmu/qemu -serialice /dev/ttyUSB0 -hda /dev/zero -L bios/*
I think you also need to specify -M serialice.
Yes, that worked very well, thanks.
Stefan
Idwer
SerialICE mailing list SerialICE@serialice.com http://serialice.com/mailman/listinfo/serialice
2010/8/3 Myles Watson mylesgw@gmail.com
On Tue, Aug 3, 2010 at 10:59 AM, Idwer Vollering vidwer@gmail.com wrote:
My problem is two-fold:
- Running the patched qemu segfaults.
$ sudo ./i386-softmmu/qemu -serialice /dev/ttyUSB0 -hda /dev/zero -L
bios/
[sudo] password for idwer: SerialICE: Open connection to target hardware... SerialICE: Waiting for handshake with target... target alife!
try the latest qemu in the SerialICE tree
svn://serialice.com/serialice/trunk/qemu-0.11.0
It's already patched, and it has been updated more recently than the patch.
- Right now, the serialice shell appears only once: after flashing
serialice.rom and performing a soft reset from vendor bios to serialice.
SerialICE v1.5 (Aug 3 2010)
Sounds like SerialICE is depending on some initialization from the vendor BIOS. I guess an ugly way to test it would be to copy the working configuration bits from lspci and hard code them into SerialICE until you find what's wrong.
Like this ? E.g. this is what I found for ICH5's LPC_EN, offset address 0xe6:
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02): // snip e0: 00 00 00 80 00 00 08 14 33 22 11 00 00 00 67 45
pci_write_config16(PCI_ADDR(0, 0x1f, 0, 0xe6), 0x1408);
Attached the mainboard code as well.
Thanks, Myles
-
Idwer Vollering -
Myles Watson -
Stefan Reinauer