New patch to review for serialice: b04ed84 [3/4] HP DL120G5: BMC code

[Idwer Vollering]

Idwer Vollering ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6159

-gerrit

commit b04ed8411058a33ffa025935faaec1d8d8c89f98
Author: Idwer Vollering <[e-mail]>
Date:   Mon Jun 30 02:59:48 2014 +0200

    [3/4] HP DL120G5: BMC code
    
    Change-Id: I39fdac61f3ecab611b737815143caa2e0bea9848
    Signed-off-by: Ruud Schramp <[e-mail]>
    Signed-off-by: Idwer Vollering <[e-mail]>
---
 SerialICE/bmc/ipmi.c         | 253 +++++++++++++++++++++++++++++++++++++++++++
 SerialICE/bmc/ipmi_disable.c |  37 +++++++
 2 files changed, 290 insertions(+)

diff --git a/SerialICE/bmc/ipmi.c b/SerialICE/bmc/ipmi.c
new file mode 100644
index 0000000..52f1153
--- /dev/null
+++ b/SerialICE/bmc/ipmi.c
@@ -0,0 +1,253 @@
+/*
+ * SerialICE
+ *
+ * Copyright (C) 2011 Netherlands Forensic Institute
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+ * This is an example of lowlevel code for disabeling the BMC serial
+ * communication.
+ */
+
+#define nftransport  0xc
+
+#define OBF (1 << 0)
+#define IBF (1 << 1)
+
+#define ipmidata  0xca2
+#define ipmicsr  0xca3
+
+#if 0
+static u8 i_n_b_debug(u16 port)
+{
+	u8 d=inb(port);
+	outb(d,0x80);
+	return d;
+}
+
+#define inb i_n_b_debug
+#endif
+
+#if 0
+static char * print_binary(char val)
+{
+	static char strbuf[20];
+	char *dat=strbuf;
+	unsigned char mask=0x80;
+	while (mask!=0) {
+		*dat= (val & mask) ? '1' : '0';
+		mask = mask>>1;
+		dat++;
+	};
+	*dat=0;
+	return strbuf;
+};
+#endif
+
+static int writestateQ(void)
+{
+	return ((inb(ipmicsr)>>6)==0x10);
+}
+
+static int readstateQ(void)
+{
+	return ((inb(ipmicsr)>>6)==0x01);
+}
+
+static int idlestateQ(void)
+{
+	return ((inb(ipmicsr)>>6)==0x00);
+}
+
+static inline void  ibfzero(void)
+{
+	while(inb(ipmicsr) &  IBF) 
+		;
+}
+static inline void  clearobf(void)
+{
+	(void) inb(ipmidata);
+}
+
+static inline void  waitobf(void)
+{
+	while((inb(ipmicsr) &  OBF) == 0) 
+		;
+}
+
+/* quite possibly the stupidest interface ever designed. */
+static inline void  first_cmd_byte(unsigned char byte)
+{
+	ibfzero();
+	clearobf();
+	outb(0x61, ipmicsr);
+	ibfzero();
+	clearobf();
+	outb(byte, ipmidata);
+}
+
+static inline void  next_cmd_byte(unsigned char byte)
+{
+	ibfzero();
+	clearobf();
+	outb(byte, ipmidata);
+}
+
+static inline void  last_cmd_byte(unsigned char byte)
+{
+	ibfzero();
+	clearobf();
+	outb(0x62, ipmicsr);
+
+	ibfzero();
+	clearobf();
+	outb(byte,  ipmidata);
+}
+
+static inline void getStatus(void )
+{
+	do {
+	ibfzero();
+	outb(0x60, ipmicsr);
+	ibfzero();
+	clearobf();
+	outb(0, ipmidata);
+	ibfzero();
+	} while (!readstateQ());
+	waitobf();
+
+	int val=inb(ipmidata);
+	outb(val,ipmidata);
+	ibfzero();
+	waitobf();
+	clearobf();
+}
+
+
+static inline void read_response_byte(void)
+{
+	int val = -1;
+	if ((inb(ipmicsr)>>6) != 1) //Check state=0x01 (READ);
+		return;
+
+	ibfzero();
+	waitobf();
+	val = inb(ipmidata);
+	outb(0x68, ipmidata);
+
+	/* see if it is done */
+	if ((inb(ipmicsr)>>6) != 1){
+		/* wait for the dummy read. Which describes this protocol */
+		waitobf();
+		(void)inb(ipmidata);
+	}
+}
+
+static inline void ipmidelay(void)
+{
+	int i;
+	for(i = 0; i < 10; i++) {
+		inb(0x80);
+	}
+}
+
+static void earlydbg(char POST)
+{
+	outb(POST,0x80);
+}
+
+static inline void ipmi_request(const char *Start, const char *End)
+{
+	unsigned char c;
+	/* be safe; make sure it is really ready */
+	while ((inb(ipmicsr)>>6)) { //Not IDLE
+		outb(inb(ipmicsr),0x80);
+		outb(0x60, ipmicsr);  //abort
+
+	};
+
+	first_cmd_byte(*Start);
+	ipmidelay();
+	Start++;
+
+	while( (int) Start< ((int) End -1)) {
+		next_cmd_byte(*Start);
+		ipmidelay();
+		Start++;
+	};
+
+	last_cmd_byte(*Start);
+	ipmidelay();
+}
+
+static void ipmi_transaction(const char *Start, const char *End)
+{
+	ipmi_request(Start,End);
+	ibfzero();
+	while(readstateQ()) {
+		char val;
+		waitobf();
+		val=inb(ipmidata);
+		outb(0x68,ipmidata);
+		ipmidelay();
+		ibfzero();
+	};
+	if (idlestateQ()) {
+//		char val;
+//	        waitobf();
+//        	val = inb(ipmidata);
+	} else {
+		getStatus();
+	}
+}
+
+
+
+const char channel_access[]={0x06<<2,0x40,0x04,0x80,0x05};
+const char serialmodem_conf[]={0x0c<<2,0x10,0x04,0x08,0x00,0x0f};
+const char serial_mux1[]={0x0c<<2,0x12,0x04,0x06};
+const char serial_mux2[]={0x0c<<2,0x12,0x04,0x03};
+const char serial_mux3[]={0x0c<<2,0x12,0x04,0x07};
+
+static void setup_early_ipmi_serial(void )
+{
+//      earlydbg(0x0d);
+        //set channel access system only
+//        ipmi_transaction(channel_access,channel_access+sizeof(channel_access));
+        while ((inb(ipmicsr)>>6)) { //Not IDLE
+                outb(inb(ipmicsr),0x80);
+                outb(0x60, ipmicsr);  //abort
+		getStatus();
+        };
+
+        //Set serial/modem config
+//        ipmi_transaction(serialmodem_conf,serialmodem_conf+sizeof(serialmodem_conf));
+//        earlydbg(result);
+
+        //Set serial mux 1
+//        ipmi_transaction(serial_mux1,serial_mux1+sizeof(serial_mux1));
+//        earlydbg(result);
+
+        //Set serial mux 2
+        ipmi_transaction(serial_mux2,serial_mux2+sizeof(serial_mux2));
+
+        //Set serial mux 3
+//        ipmi_transaction(serial_mux3,serial_mux3+sizeof(serial_mux3));
+
+        earlydbg(0x0e);
+
+}
+
diff --git a/SerialICE/bmc/ipmi_disable.c b/SerialICE/bmc/ipmi_disable.c
new file mode 100644
index 0000000..5c70f11
--- /dev/null
+++ b/SerialICE/bmc/ipmi_disable.c
@@ -0,0 +1,37 @@
+/*
+ * SerialICE
+ *
+ * Copyright (C) 2011 Netherlands Forensic Institute
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+ * This is an example of lowlevel code for disabeling the BMC serial
+ * communication.
+ */
+#include <stdio.h>
+#include <sys/io.h>
+
+#include "ipmi.c"
+
+int main(int argc, char **argv)
+{
+	iopl(3);
+	ioperm(0x80, 0x20 , 1);
+	earlydbg(0x12);
+	getStatus();
+	setup_early_ipmi_serial();
+};
+