[SerialICE] Patch set updated for serialice: 134be6c southbridge/amd-sbxxx.c: Init clock to 48 MHz on AMD SB800

[Paul Menzel]

Paul Menzel ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5213

-gerrit

commit 134be6c775289fa124141d5c9de0b240155cce8c
Author: Paul Menzel 
Date:   Mon Jul 15 13:31:51 2013 +0200

southbridge/amd-sbxxx.c: Init clock to 48 MHz on AMD SB800

Copy the init from coreboot’s `src/southbridge/amd/cimx/sb800/bootblock.c`.

Daniel Gröber showed my error in forgetting to actually enable the
    clock of 48 MHz so it did not work for me with 14 MHz.

The Super I/O SMSC SCH311x needs 14 MHz so the Kconfig option is
    ported over.

Change-Id: I9146d2c0620c2bb338130f55ead0704fa82075c7
    Signed-off-by: Daniel Gröber 
    Signed-off-by: Paul Menzel 
---
 SerialICE/southbridge/amd-sbxxx.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/SerialICE/southbridge/amd-sbxxx.c b/SerialICE/southbridge/amd-sbxxx.c
index 27b6b3b..d246a04 100644
--- a/SerialICE/southbridge/amd-sbxxx.c
+++ b/SerialICE/southbridge/amd-sbxxx.c
@@ -30,17 +30,22 @@
 #define SB_MMIO 0xFED80000
 #define SB_MMIO_MISC32(x) *(volatile u32 *)(SB_MMIO + 0xE00 + (x))

+
 static void sbxxx_enable_48mhzout(void)
 {
-	/* most likely programming to 48MHz out signal */
    u32 reg32;
-	reg32 = SB_MMIO_MISC32(0x28);
-	reg32 &= 0xffc7ffff;
-	reg32 |= 0x00100000;
-	SB_MMIO_MISC32(0x28) = reg32;

+	// Program SB800 MiscClkCntrl register to configure clock output on the
+	// 14M_25M_48M_OSC ball usually used for the Super-I/O.
+	// Almost all SIOs need 48 MHz, only the SMSC SCH311x wants 14 MHz,
+	// which is the SB800's power up default.  We could switch back to 14
+	// in the mainboard's romstage.c, but then the clock frequency would
+	// change twice.
    reg32 = SB_MMIO_MISC32(0x40);
-	reg32 &= ~0x80u;
+	reg32 &= ~((1 << 2) | (3 << 0)); // enable, 14 MHz (power up default)
+#if !CONFIG_SUPERIO_WANTS_14MHZ_CLOCK
+	reg32 |= 2 << 0; // Device_CLK1_sel = 48 MHz
+#endif
    SB_MMIO_MISC32(0x40) = reg32;
 }

@@ -59,9 +64,12 @@ static void southbridge_init(void)
    pci_write_config32(PCI_ADDR(0, 0x18, 1, 0xc4),  0x0000f000);
    pci_write_config32(PCI_ADDR(0, 0x18, 1, 0xc0),  0x00000003);

-	/* SB  MMIO range decode enable */
+	// Program AcpiMmioEn to enable MMIO access to MiscCntrl register
    outb(0x24, 0xcd6);
-	outb(0x1, 0xcd7);
+	reg8 = inb(0xcd7);
+	reg8 |= 1;
+	reg8 &= ~(1 << 1);
+	outb(reg8, 0xcd7);

/* Enable LPC decoding of 0x2e/0x2f, 0x4e/0x4f 0x3f8  */
    pci_write_config8(PCI_ADDR(0, 0x14, 3, 0x44), (1<<6));