openfirmware September 2011

openfirmware@openfirmware.info

1 participants
60 discussions

[commit] r2515 - cpu/arm/olpc/1.75
by repository service 16 Sep '11

16 Sep '11

Author: wmb Date: Fri Sep 16 02:43:49 2011 New Revision: 2515 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2515 Log: OLPC XO-1.75 - Cleaned up some old cruft in the build script for nandblaster. Modified: cpu/arm/olpc/1.75/mcastnand.bth Modified: cpu/arm/olpc/1.75/mcastnand.bth ============================================================================== --- cpu/arm/olpc/1.75/mcastnand.bth Fri Sep 16 02:43:04 2011 (r2514) +++ cpu/arm/olpc/1.75/mcastnand.bth Fri Sep 16 02:43:49 2011 (r2515) @@ -5,25 +5,18 @@ fload ${BP}/cpu/arm/olpc/1.75/mcnand-version.fth -1 [if] - " ${MCNAND_VERSION}" expand$ " test" $= [if] - " multicast-nand/Makefile" $file-exists? 0= [if] - " git clone -q git+ssh://dev.laptop.org/git/users/wmb/multicast-nand" expand$ $sh - [then] - [else] - " rm -rf multicast-nand" $sh - " wget -q -O multicast-nand.tar.gz http://dev.laptop.org/git/users/wmb/multicast-nand/snapshot/multicast-nand-…" expand$ $sh - " tar xfz multicast-nand.tar.gz" $sh - " mv multicast-nand-${MCNAND_VERSION} multicast-nand" expand$ $sh - " rm multicast-nand.tar.gz" $sh +" ${MCNAND_VERSION}" expand$ " test" $= [if] + " multicast-nand/Makefile" $file-exists? 0= [if] + " git clone -q git+ssh://dev.laptop.org/git/users/wmb/multicast-nand" expand$ $sh [then] - - " (cd multicast-nand; make BPDIR=../../../../../.. OFW_CPU=arm nandblaster15_rx.bin nandblaster_tx.bin; cp nandblaster15_rx.bin nandblaster_tx.bin ..)" expand$ $sh -[else] - " (cd /home/wmb/Git/multicast-nand; make BPDIR=/home/wmb/ofw.test OFW_CPU=x86 nandblaster15_rx.bin nandblaster_tx.bin;)" $sh - " cp /home/wmb/Git/multicast-nand/*blaster*.bin ." expand$ $sh +[else] + " rm -rf multicast-nand" $sh + " wget -q -O - http://dev.laptop.org/git/users/wmb/multicast-nand/snapshot/multicast-nand-… | tar xfz -" expand$ $sh + " mv multicast-nand-${MCNAND_VERSION} multicast-nand" expand$ $sh [then] +" (cd multicast-nand; make BPDIR=../../../../../.. OFW_CPU=arm nandblaster15_rx.bin nandblaster_tx.bin; cp nandblaster15_rx.bin nandblaster_tx.bin ..)" expand$ $sh + \ This forces the creation of a .log file, so we don't re-fetch writing mcastnand.version " ${MCNAND_VERSION}"n" expand$ ofd @ fputs

1 0

[commit] r2514 - dev/olpc/kb3700
by repository service 16 Sep '11

16 Sep '11

Author: wmb Date: Fri Sep 16 02:43:04 2011 New Revision: 2514 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2514 Log: OLPC XO-1.75 - Better management of ACK line to EC when not ready to receive events. Modified: dev/olpc/kb3700/eccmds.fth dev/olpc/kb3700/spicmd.fth Modified: dev/olpc/kb3700/eccmds.fth ============================================================================== --- dev/olpc/kb3700/eccmds.fth Fri Sep 16 02:41:48 2011 (r2513) +++ dev/olpc/kb3700/eccmds.fth Fri Sep 16 02:43:04 2011 (r2514) @@ -9,8 +9,14 @@ : do-ec-cmd-buf ( [ args ] #args #results cmd-code -- buf-adr ) " ec-command-buf" $call-ec ; +: open-ec ( -- ) + ec-ih 0= if " /ec-spi" open-dev to ec-ih then +; +: close-ec ( -- ) + ec-ih if ec-ih close-dev 0 to ec-ih then +; stand-init: EC - " /ec-spi" open-dev to ec-ih + open-ec ; : too-many-retries ( -- ) true abort" Too many EC command retries" ; Modified: dev/olpc/kb3700/spicmd.fth ============================================================================== --- dev/olpc/kb3700/spicmd.fth Fri Sep 16 02:41:48 2011 (r2513) +++ dev/olpc/kb3700/spicmd.fth Fri Sep 16 02:43:04 2011 (r2514) @@ -331,6 +331,7 @@ true ; : close ( -- ) + set-ack open-count 1 = if ssp-base h# 1000 " map-out" $call-parent 0 is ssp-base then @@ -388,9 +389,10 @@ dup get-msecs - 0< ( limit ) until ( limit ) drop + clr-cmd true abort" EC command result timeout" ; - + : ec-command-buf ( [ args ] #args #results cmd-code -- result-buf-adr ) 0 set-cmdbuf ( )

1 0

[commit] r2513 - dev/video/common
by repository service 16 Sep '11

16 Sep '11

Author: wmb Date: Fri Sep 16 02:41:48 2011 New Revision: 2513 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2513 Log: ARM - ARM version of argb>565-pixel was badly broken. Modified: dev/video/common/rectangle16.fth Modified: dev/video/common/rectangle16.fth ============================================================================== --- dev/video/common/rectangle16.fth Fri Sep 16 02:40:48 2011 (r2512) +++ dev/video/common/rectangle16.fth Fri Sep 16 02:41:48 2011 (r2513) @@ -52,14 +52,14 @@ 0= until c; code argb>565-pixel ( argb -- 565 ) - mov r0,tos,lsr #3 \ Blue - and r0,tos,#0x1f + and r0,tos,#0xf8 \ Blue + mov r0,r0,lsr #3 and r1,tos,#0xfc00 \ Green - orr r0,r1,r1,lsr #5 + orr r0,r0,r1,lsr #5 and r1,tos,#0xf80000 \ Red - orr r0,r1,r1,lsr #8 + orr r0,r0,r1,lsr #8 mov tos,r0 c;

1 0

[commit] r2512 - cpu/arm/olpc/1.75 dev/hdaudio
by repository service 16 Sep '11

16 Sep '11

Author: wmb Date: Fri Sep 16 02:40:48 2011 New Revision: 2512 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2512 Log: OLPC XO-1.75 - checkpoint of revised audio code. May still have rough edges. Modified: cpu/arm/olpc/1.75/alc5631.fth cpu/arm/olpc/1.75/sound.fth dev/hdaudio/noiseburst.fth dev/hdaudio/test.fth Modified: cpu/arm/olpc/1.75/alc5631.fth ============================================================================== --- cpu/arm/olpc/1.75/alc5631.fth Fri Sep 16 01:34:00 2011 (r2511) +++ cpu/arm/olpc/1.75/alc5631.fth Fri Sep 16 02:40:48 2011 (r2512) @@ -5,38 +5,53 @@ : adc-off ( -- ) h# 0c00 h# 3a codec-clr ; : dac-on ( -- ) h# 0300 h# 3a codec-set ; : dac-off ( -- ) h# 0300 h# 3a codec-clr ; +: adc+dac-on ( -- ) h# 0f00 h# 3a codec-set ; + +: set-routing ( -- ) + h# c0c0 h# 02 codec-set \ SPKMIXLR -> SPKVOLLR, muted + h# c0c0 h# 04 codec-set \ OUTMIXLR -> HPOVOLLR, muted +\ h# a080 h# 06 codec! \ AXO1/AXO2 channel volume select OUTMIXER,0DB by default + h# b0b0 h# 14 codec! \ Record Mixer source from Mic1/Mic2 by default +\ h# 5500 h# 22 codec! \ Mic1/Mic2 boost 20DB by default (done in set-default-gains) + h# dfc0 h# 1a codec! \ DACL -> OUTMIXL - c0 is "don't change it" per datasheet 0.91 + h# dfc0 h# 1c codec! \ DACR -> OUTMIXR - c0 is "don't change it" per datasheet 0.91 + h# d8d8 h# 28 codec! \ DACLR -> SPKMIXLR - 808 is "don't change it" per datasheet 0.91 + h# 6c00 h# 2a codec! \ unmute SPKVOLL -> SPOLMIX, SPKVOLR -> SPORMIX, mute L>R, R>L, and L/R>MONO + h# 0f18 h# 4a codec! \ (undocumented bit 11) enables HP zero-cross detection + + h# 0000 h# 2c codec! \ SPOxMIX -> SPKRMUX, HPOVOL -> HPMUX +; : codec-on ( -- ) 0 0 codec! \ Reset - b# 1010.0000.0001.1101 h# 3c codec! \ All on except AX and MONO - d# 110 ms - b# 1110.0000.0001.1101 h# 3c codec! \ Fast VREF control - d# 100 ms + b# 1010.0000.0000.0000 h# 3c codec! \ All on except AX and MONO + d# 80 ms + b# 1110.0000.0000.0000 h# 3c codec! \ Fast VREF control + + set-routing + + h# 8001 h# 34 codec! \ Slave mode, 16 bits, left justified, exchange L and R on playback + + \ The speaker gain ratio must be <= the ratio of SPKVDD to AVDD. + \ In our system, SPKVDD is 5V and AVDD is 3.3V, so we need a gain ratio <= 1.51 . + \ The value 3 gives a ratio of 1.44, and value 4 gives a ratio of 1.56 . We use 3. + h# 3e00 h# 40 codec! \ Speaker Amp Ratio GAIN is 1.44x, no HPFs - h# 8001 h# 34 codec! \ Slave mode, 16 bits, left justified + h# 0000 h# 42 codec! \ Use MCLK, not PLL +\ b# 1110.1100.1001.0000 h# 52 codec! \ Protection on +\ h# 4000 h# 56 codec! \ HP depop by register control h# 1010 h# 38 codec! \ Divisors; the values in this register don't seem to make much \ difference unless you set the divisors to very high values. - +; +: elided ( -- ) \ The ADC and DAC will be turned on as needed by adc-on and dac-on, after \ the BCLK clock from the SoC is on. If you turn on the ADC when BCLK is \ not clocking, the ADC often doesn't output any data. b# 1001.0000.1110.0000 h# 3a codec! \ All on except ADC and DAC b# 1111.1100.0011.1100 h# 3b codec! \ All on except PLL b# 1111.1100.0000.0000 h# 3e codec! \ AXI and MONO IN off - -\ h# 8c00 h# 40 codec! \ Speaker Amp Auto Ratio GAIN, use HPFs - h# 4e00 h# 40 codec! \ Speaker Amp Ratio GAIN is 1.44x, no HPFs - h# 0000 h# 42 codec! \ Use MCLK, not PLL -\ b# 1110.1100.1001.0000 h# 52 codec! \ Protection on - h# 8000 h# 56 codec! \ HP depop by register control -; -: codec-off ( -- ) - 0 h# 3a codec! \ All off - 0 h# 3b codec! \ All off - 0 h# 3c codec! \ All off - 0 h# 3e codec! \ All off ; : mic-bias-off ( -- ) h# 000c h# 3b codec-clr ; : mic-bias-on ( -- ) h# 000c h# 3b codec-set ; @@ -46,60 +61,204 @@ : mic2-high-bias ( -- ) h# 08 h# 22 codec-clr mic-bias-on ; \ 0.90*AVDD, e.g. 3V with AVDD=3.3V : mic2-low-bias ( -- ) h# 08 h# 22 codec-set mic-bias-on ; \ 0.75*AVDD, e.g. 2.5V with AVDD=3.3V +: depop! ( value -- ) h# 54 codec! ; +: pwr3a! ( value -- ) h# 3a codec! ; +: pwr3b! ( value -- ) h# 3b codec! ; +: pwr3c! ( value -- ) h# 3c codec! ; +: pwr3e! ( value -- ) h# 3e codec! ; +: depop( ( current -- ) + h# 0000 h# 5c codec! \ Disable ZCD + h# 0710 h# 4a codec! \ Bit 11=0 disables HP zero-cross detection. 71 is reserved bits. + d# 10 ms + ( current ) h# 56 codec-i! \ Index 56 - depop current control +; +: )depop ( -- ) + h# 04c0 h# 5c codec! \ Power on ZCD, enable ZCD for SPOL/R + h# 0f10 h# 4a codec! \ Bit 11 enables HP zero-cross detection. 71 is reserved bits +; + +0 value headphones-on? +0 value speakers-on? + +: mute-speakers ( -- ) h# 8080 2 codec-set ; +: unmute-speakers ( -- ) h# 8080 2 codec-clr ; + \ The range is from -46.5 db to +12 dB -: gain>lr-12 ( db -- true | regval false ) +: gain>lr-12 ( db -- regval on? ) d# 12 min ( db' ) 2* 3 / ( steps ) \ Converts -46.5 .. 12 db to -31 .. 8 steps dup d# -31 < if ( steps ) - drop true + drop h# 2727 ( regval ) + false ( regval on? ) else ( steps ) 8 swap - ( -steps ) 0 max ( clipped-steps ) dup 8 lshift or ( regval ) - false + true ( regval on? ) then ; +: set-speaker-volume ( n -- ) + gain>lr-12 to speakers-on? h# bfbf 2 codec-field +; + +: mute-headphones ( -- ) h# 8080 4 codec-set ; +: unmute-headphones ( -- ) h# 8080 4 codec-clr ; + \ The range is from -46.5 db to 0 dB -: gain>lr ( db -- true | regval false ) +: gain>lr ( db -- regval on? ) 0 min ( db' ) 2* 3 / ( steps ) \ Converts -46.5 .. 12 db to -31 .. 8 steps dup d# -31 < if ( steps ) - drop true + drop h# 1f1f ( regval ) + false ( regval on? ) else ( steps ) 0 swap - ( -steps ) 0 max ( clipped-steps ) dup 8 lshift or ( regval ) - false + true ( regval on? ) then ; - -\ This sets up a simple routing from the DAC to the headphone and speaker outputs -: output-config ( -- ) - h# df00 h# 1a codec! \ DACL -> OUTMIXL - h# df00 h# 1c codec! \ DACR -> OUTMIXR - h# 4040 h# 04 codec-set \ OUTMIXLR -> HPOVOLLR - h# d0d0 h# 28 codec! \ DACLR -> SPKMIXLR - h# 4040 h# 02 codec-set \ SPKMIXLR -> SPKVOLLR - h# 9000 h# 2a codec! \ SPKVOLL -> SPOLMIX, SPKVOLR -> SPORMIX - h# 0000 h# 2c codec! \ SPOxMIX -> SPKRMUX, HPOVOL -> HPMUX +: set-headphone-volume ( n -- ) + gain>lr to headphones-on? h# 9f9f 4 codec-field ; -: mute-speakers ( -- ) h# 8080 2 codec-set ; -: set-speaker-volume ( n -- ) \ DONE - gain>lr-12 if h# 8080 then h# bfbf 2 codec-field +: codec-off ( -- ) + mute-speakers + mute-headphones + 0 h# 3a codec! \ All off + 0 h# 3b codec! \ All off + 0 h# 3c codec! \ All off + 0 h# 3e codec! \ All off ; -: mute-headphones ( -- ) h# 8080 4 codec-set ; -: set-headphone-volume ( n -- ) \ DONE - gain>lr if h# 8080 then h# 9f9f 4 codec-field + +: hp-powerup-depop ( -- ) + \ powerup depop + h# 303e depop( \ App note says 303f, engineer says to use 303e + h# e01c pwr3c! \ 1c powers on charge pump, HP Amp L/R + h# 8080 depop! \ Power on HP Soft Generator, (datasheet says 80 bit is "reserved-0", engineer says datasheet is wrong) + d# 100 ms + h# e01e pwr3c! \ Now put HP output in normal, not depop, mode + )depop + + \ unmute depop + h# 302f depop( \ This is the only case where 10 ms delay is actually needed + h# c003 depop! \ Power on HP Soft Generator, HP Softgen Trigger, ena HPOL/R depop + unmute-headphones + d# 160 ms + )depop +; +: hp-powerdown-depop ( -- ) + \ mute depop + h# 302f depop( + h# c003 depop! \ Power on HP Soft Generator, HP Softgen Trigger, ena HPOL/R depop + mute-headphones + d# 150 ms + )depop + + \ powerdown depop + h# 303f depop( + h# c030 depop! \ ..30 enables HPOL/R startup, disables HPOL/R depop + d# 75 ms + h# 8030 depop! \ !4000 powers down HP softgen trigger + h# e01c pwr3c! \ !2 puts HP output in depop mode + h# 80b0 depop! + d# 80 ms + h# 8000 depop! \ !30 disables HPOL/R startup + h# e000 pwr3c! \ !1c powers off charge pump, HP Amp L/R + )depop +; + +: open-common ( -- ) + h# 8080 h# 3a codec-set \ Power on I2S, DAC ref (which is also used for ADC according to the engineer) +; +: close-common ( -- ) + h# 8080 h# 3a codec-clr \ Power off I2S, DAC ref +\ h# 0000 pwr3b! \ Power off PLL +; +: open-out-specific ( -- ) + h# 0060 h# 3a codec-set \ Power on DAC to mixer + speakers-on? if h# 1000 h# 3a codec-set then \ Power on ClassD amp + speakers-on? if h# c000 h# 3e codec-set then \ Power on SPKL/RVOL + headphones-on? if h# 0c00 h# 3e codec-set then \ Power on HPOVOLL/R +\ h# 0300 h# 3a codec-set \ Power on DACL/R - defer until dac-on is called by start-audio-out or out-in + h# c000 pwr3b! \ Power on OUTMIXL/R + speakers-on? if h# 3000 h# 3b codec-set then \ Power on SPKMIXL/R + + speakers-on? if unmute-speakers then + headphones-on? if hp-powerup-depop then +; + +: open-out ( -- ) + open-common + open-out-specific +; + +: close-out-specific ( -- ) + speakers-on? if mute-speakers then + headphones-on? if hp-powerdown-depop then + + h# f000 h# 3b codec-clr \ Power off OUTMIXL/R, SPKMIXL/R + h# 0300 h# 3a codec-clr \ Power off DACs + h# cc00 h# 3e codec-clr \ Power off SPKL/RVOL, HPOVOLL/R + h# 1060 h# 3a codec-clr \ Power off ClassD amp, DAC to mixer +; +: close-out ( -- ) + close-out-specific + close-common +; + +: adc-source ( value -- ) h# c000 h# 4a codec-field ; +: adc-stereo ( -- ) 0 adc-source ; \ L->L, R->R +: adc-mono-left ( -- ) h# 4000 adc-source ; \ L->L+R +: adc-mono-right ( -- ) h# 8000 adc-source ; \ R->L+R +: adc-stereo-reversed ( -- ) h# c000 adc-source ; \ L->R, R->L (channels swapped) + +: open-in-specific ( -- ) + h# 000c h# 3b codec-set \ Power on MIC1/2 bias + adc-stereo + h# 0c00 h# 3b codec-set \ Power on RECMIXLR + h# 0030 h# 3b codec-set \ Power on MIC1/2 boost gain +\ h# 0c00 h# 3a codec-set \ Power on ADCL/R - defer until adc-on is called by audio-in or out-in +; +: open-in ( -- ) +\ h# 46f0 h# 44 codec! \ pll: 256000 -> 2048000 ??? why is this different from playback? - 8khz record? + open-common + open-in-specific +; + +: close-in-specific ( -- ) + h# 0c00 h# 3a codec-clr \ Power off ADCL/R + h# 0030 h# 3b codec-clr \ Power off MIC1/2 boost gain + h# 0c0c h# 3b codec-clr \ Power off RECMIXLR, MIC1/2 bias +; +: close-in ( -- ) + close-in-specific + close-common +; + +: open-out-in ( -- ) + open-common + open-out-specific + open-in-specific +; + +: close-out-in ( -- ) + close-in-specific + close-out-specific + close-common ; false value force-speakers? : set-volume ( n -- ) + mute-speakers mute-headphones \ Start with both muted, will be unmuted later headphones-inserted? ( force-speakers? 0= and ) if - set-headphone-volume mute-speakers + d# 30 - set-headphone-volume + true false else - set-speaker-volume mute-headphones + set-speaker-volume + false true then + to speakers-on? to headphones-on? ; d# 0 constant default-adc-gain \ 0 dB - range is -96.625 to +28.5 d# 0 constant default-dac-gain \ 0 dB - range is -96.625 to +28.5 @@ -108,9 +267,9 @@ d# -10 constant default-headphone-volume \ -10 dB - range is -46.5 to 0 : speakers-on ( -- ) default-speaker-volume set-speaker-volume ; -: speakers-off ( -- ) d# -100 set-speaker-volume ; +: speakers-off ( -- ) d# -100 set-speaker-volume ; : headphones-on ( -- ) default-headphone-volume set-headphone-volume ; -: headphones-off ( -- ) d# -100 set-headphone-volume ; +: headphones-off ( -- ) d# -100 set-headphone-volume ; : adc-mute-all ( -- ) h# f0f0 h# 14 codec! ; : adc-mute-mic ( -- ) h# 4040 h# 14 codec-set ; @@ -126,28 +285,40 @@ : outmix-mute-recmix ( -- ) h# 8000 dup h# 1a codec-set h# 1c codec-set ; : outmix-unmute-recmix ( -- ) h# 8000 dup h# 1a codec-clr h# 1c codec-clr ; -: gain>lr-3/8 ( -- lrgain boost ) - d# 28 min - dup 0>= if ( n ) +: attenuation-3/8 ( db -- lrgain boost ) + dup d# -96 <= if ( db ) + drop ( ) + h# ffff h# 8080 ( lrgain boost-muted ) + else ( db ) + negate 8 3 */ ( steps ) + dup bwjoin ( lrgain ) + 0 ( lrgain boost ) + then ( lrgain boost ) +; +: gain>lr-3/8 ( db -- lrgain boost ) + d# 28 min ( db ) + dup 0>= if ( db ) 8 3 */ ( boost ) \ Convert to .375 dB increments 0 swap ( lrgain boost ) - else ( n ) - dup d# -96 <= if ( n ) - drop ( ) - h# ffff h# 8080 ( lrgain boost ) - else ( n ) - negate 8 3 */ ( steps ) - dup bwjoin ( lrgain ) - 0 ( lrgain boost ) - then ( lrgain boost ) - then ( lrgain boost ) + else ( db ) + attenuation-3/8 ( lrgain boost ) + then ( lrgain boost ) ; -: set-dac-gain ( n -- ) +: set-dac-gain ( db -- ) dup d# -96 < if outmix-mute-dac else outmix-unmute-dac then gain>lr-3/8 h# 0c codec! h# 10 codec! ; -: set-adc-gain ( n -- ) - gain>lr-3/8 h# 12 codec! h# 16 codec! +: gain>lr-3/2+3/8 ( db -- lrgain boost ) + d# 28 min ( db ) + dup 0>= if ( db ) + 2 3 */ ( boost ) \ Convert to 1.5 dB increments + 0 swap ( lrgain boost ) + else ( db ) + attenuation-3/8 ( lrgain boost ) + then ( lrgain boost ) +; +: set-adc-gain ( db -- ) + gain>lr-3/2+3/8 h# 12 codec! h# 16 codec! ; : mic1-balanced ( -- ) h# 8000 h# 8000 h# 0e codec-field ; : mic1-single-ended ( -- ) 0 h# 8000 h# 0e codec-field ; @@ -178,7 +349,6 @@ : mic+0db ( -- ) 0 set-mic-gain ; : mic+20db ( -- ) d# 20 set-mic-gain ; : set-default-gains ( -- ) - output-config headphones-inserted? ( force-speakers? 0= and ) if headphones-on speakers-off Modified: cpu/arm/olpc/1.75/sound.fth ============================================================================== --- cpu/arm/olpc/1.75/sound.fth Fri Sep 16 01:34:00 2011 (r2511) +++ cpu/arm/olpc/1.75/sound.fth Fri Sep 16 02:40:48 2011 (r2512) @@ -112,8 +112,7 @@ 0 d# 18 lshift or \ External clock - slave configuration (Rx is master) 0 d# 17 lshift or \ Sample on rising edge of clock -\ Empirically, this needs to be backwards from what we think it should be - 0 d# 16 lshift or \ Active high frame sync (should be active low, but that gives backwards results) + 1 d# 16 lshift or \ Active low frame sync (I2S standard) d# 31 d# 4 lshift or \ Frame sync period 1 d# 2 lshift or \ Flush the FIFO @@ -259,11 +258,6 @@ : dma-alloc ( len -- adr ) " dma-alloc" $call-parent ; : dma-free ( adr len -- ) " dma-free" $call-parent ; -: open-in ( -- ) ; -: close-in ( -- ) ; -: open-out ( -- ) ; -: close-out ( -- ) ; - : wait-out ( -- ) buf-timeout 0 do 1 ms h# a0 adma@ 1 and ?leave @@ -292,6 +286,7 @@ stop-out-ring uninstall-playback-alarm false to playing? + close-out ; : out-ready? ( -- flag ) @@ -387,7 +382,7 @@ disable-sspa-rx ( actual ) reset-rx ( actual ) ; -: read ( adr len -- actual ) open-in audio-in ; +: read ( adr len -- actual ) open-in audio-in close-in ; 0 value mono? 0 value in-adr0 @@ -398,13 +393,15 @@ loop ; : out-in ( out-adr out-len in-adr in-len -- ) + open-out-in + to in-len0 to in-adr0 ( out-adr out-len ) to out-len to out-adr ( ) in-adr0 to in-adr ( ) in-len0 mono? if 2* then to in-len - audio-clock-on ( ) \ This will mess up any frequency settings + ( audio-clock-on ) ( ) \ This will mess up any frequency settings setup-sspa-tx ( ) setup-sspa-rx ( ) @@ -421,8 +418,7 @@ master-rx ( ) \ Now the clock is on slave-tx ( ) - adc-on ( ) - dac-on ( ) + adc+dac-on ( ) true to playing? @@ -439,6 +435,8 @@ dac-off adc-off ( ) mono? if collapse-in then ( ) + + close-out-in ; 0 [if] \ Interactive test words for out-in @@ -527,7 +525,7 @@ 2 value #channels \ Unless you do the audio-clock-on, the L/R phase is often wrong -: input-test-settings ( -- ) audio-clock-on ; +: input-test-settings ( -- ) ( audio-clock-on ) ; : output-test-settings ( -- ) ; d# -1 constant case-test-volume Modified: dev/hdaudio/noiseburst.fth ============================================================================== --- dev/hdaudio/noiseburst.fth Fri Sep 16 01:34:00 2011 (r2511) +++ dev/hdaudio/noiseburst.fth Fri Sep 16 02:40:48 2011 (r2512) @@ -562,8 +562,40 @@ defer analyze-right defer fix-dc +[ifdef] notdef +fload ${BP}/forth/lib/isin.fth +fload ${BP}/forth/lib/tones.fth + +\ This version puts the tone first into the left channel for +\ half the time, then into the right channel for the remainder +: make-2tones ( adr len freq sample-rate -- ) + 2dup set-freq ( adr len freq sample-rate ) + + 3 pick make-cycle drop ( adr len freq sample-rate ) + + swap 2* swap set-freq ( adr len ) + over wa1+ make-cycle drop ( adr len ) + + + \ Copy the wave template into the remainder of the buffer + over /cycle + over /cycle - bounds ?do ( adr len ) + over i /cycle move ( adr len ) + /cycle +loop ( adr len ) + 2drop +; +1 value debug-analyzer? +[then] + : prepare-signal ( -- out-adr, len in-adr,len ) +[ifdef] debug-analyzer? + debug-analyzer? if + pb /pb d# 1000 d# 48000 make-2tones + else + pb /pb bounds do random-long i l! /l +loop + then +[else] pb /pb bounds do random-long i l! /l +loop +[then] pb /pb -stereo-wmean pb wa1+ /pb -stereo-wmean pb /pb lose-6db Modified: dev/hdaudio/test.fth ============================================================================== --- dev/hdaudio/test.fth Fri Sep 16 01:34:00 2011 (r2511) +++ dev/hdaudio/test.fth Fri Sep 16 02:40:48 2011 (r2512) @@ -102,7 +102,7 @@ false value plot? \ Set to true to plot the impulse response, for debugging : plot-impulse ( adr -- ) d# 600 ( adr #samples ) - " 0 set-fg h# ffff set-bg single-drawing clear-drawing wave" evaluate + " 0 set-fg h# ffffffff set-bg single-drawing clear-drawing wave" evaluate key ascii d = if debug-me then ;

1 0

[commit] r2511 - cpu/arm/mmp2
by repository service 16 Sep '11

16 Sep '11

Author: quozl Date: Fri Sep 16 01:34:00 2011 New Revision: 2511 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2511 Log: OLPC XO-1.75 - add thermal sensor watch mode Modified: cpu/arm/mmp2/thermal.fth Modified: cpu/arm/mmp2/thermal.fth ============================================================================== --- cpu/arm/mmp2/thermal.fth Thu Sep 15 08:08:18 2011 (r2510) +++ cpu/arm/mmp2/thermal.fth Fri Sep 16 01:34:00 2011 (r2511) @@ -26,10 +26,22 @@ : wd-thresh@ ( -- n ) wd-thresh io@ ; : wd-thresh! ( n -- ) wd-thresh io! ; +: .c ( n -- ) (.) type ." C " ; + : .thermal - ." degrees=" cpu-temperature .d - ." raw=" thermal-base io@ h# 3ff and . - ." threshold=" wd-thresh@ h# 3ff and . + push-decimal + time&date >unix-seconds . + ." limit: " wd-thresh@ h# 3ff and . + ." sensor: " thermal-base io@ h# 3ff and . + ." cpu: " cpu-temperature .c + ." battery: " bat-temp .c + pop-base +; + +: watch-thermal + begin + .thermal cr d# 1000 ms key? + until key drop cr ; : test-thermal

1 0

[commit] r2510 - cpu/arm/olpc/1.75 dev/olpc/spiflash
by repository service 15 Sep '11

15 Sep '11

Author: quozl Date: Thu Sep 15 08:08:18 2011 New Revision: 2510 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2510 Log: OLPC XO-1.75 - enforce SPI FLASH write protect during security startup, #11228 Modified: cpu/arm/olpc/1.75/fw.bth dev/olpc/spiflash/flashif.fth dev/olpc/spiflash/spiflash.fth Modified: cpu/arm/olpc/1.75/fw.bth ============================================================================== --- cpu/arm/olpc/1.75/fw.bth Thu Sep 15 07:39:43 2011 (r2509) +++ cpu/arm/olpc/1.75/fw.bth Thu Sep 15 08:08:18 2011 (r2510) @@ -82,9 +82,16 @@ false to stand-init-debug? \ true to stand-init-debug? +: sec-trg ( -- ) d# 73 gpio-set ; \ rising edge latches SPI_WP# low +: sec-trg? ( -- bit ) d# 73 gpio-pin@ ; + +alias ec-indexed-io-off sec-trg +alias ec-indexed-io-off? sec-trg? +alias ec-ixio-reboot ec-power-cycle \ clears latch, brings SPI_WP# high + false value secure? -: protect-fw ( -- ) ; +: protect-fw ( -- ) secure? if flash-protect sec-trg then ; hex : i-key-wait ( ms -- pressed? ) @@ -280,9 +287,6 @@ defer rm-go-hook \ Not used, but makes security happy : tsc@ ( -- d.ticks ) timer0@ u>d ; d# 6500 constant ms-factor -0 value ec-indexed-io-off? \ !!! -: ec-indexed-io-off ( -- ) ; \ !!! -: ec-ixio-reboot ( -- ) ; \ !!! \ idt1338 rtc and ram address map \ 00 -> 0f rtc Modified: dev/olpc/spiflash/flashif.fth ============================================================================== --- dev/olpc/spiflash/flashif.fth Thu Sep 15 07:39:43 2011 (r2509) +++ dev/olpc/spiflash/flashif.fth Thu Sep 15 08:08:18 2011 (r2510) @@ -9,6 +9,7 @@ defer flash-read ( adr len offset -- ) defer flash-verify ( adr len offset -- mismatch? ) defer flash-erase-block ( offset -- ) +defer flash-protect ( -- ) h# 10.0000 value /flash h# 10000 value /flash-block Modified: dev/olpc/spiflash/spiflash.fth ============================================================================== --- dev/olpc/spiflash/spiflash.fth Thu Sep 15 07:39:43 2011 (r2509) +++ dev/olpc/spiflash/spiflash.fth Thu Sep 15 08:08:18 2011 (r2510) @@ -91,6 +91,38 @@ 1 spi-cmd ( b ) spi-out stop-writing ; +\ Protect the device from further writes, by setting the Status +\ Register Protect (SRP) bit, and the Block Protect (BP2 BP1 BP0) +\ bits. + +\ Caller must then lower /WP pin, which prevents further write access +\ to the status register until the /WP pin is raised. + +: spi-protect ( -- ) h# 9c spi-write-status ; + +\ Turn off the protection bits. + +\ Is only permitted by the device if the /WP pin is high, otherwise it +\ is ignored and the status register protection bits are unchanged. + +: spi-unprotect ( -- ) h# 0 spi-write-status ; + +\ Check if the device is protected from further writes, by testing for +\ a set SRP, and if so trying to clear it, and checking if it remained +\ clear. + +: spi-protected? ( -- flag ) + spi-read-status h# 80 and if + spi-read-status ( status ) + spi-unprotect ( status ) + spi-read-status h# 80 and if ( status ) + drop true exit ( status ) + then ( status ) + spi-write-status + then + false +; + \ Erase a 64k block : erase-spi-block ( offset -- ) h# d8 setup-spi-write stop-writing ; @@ -282,7 +314,7 @@ ( default ) true abort" Unsupported SPI FLASH ID" endcase to write-spi-flash - 0 spi-write-status \ Turn off write protect bits + spi-unprotect ; \ Display a message telling what kind of part was found @@ -299,14 +331,17 @@ then ; - : spi-flash-open ( -- ) \ One retry spi-start ['] spi-identify catch if spi-start spi-identify then ; -: spi-flash-write-enable ( -- ) flash-open .spi-id cr ; + +: spi-flash-write-enable ( -- ) + flash-open .spi-id cr + spi-protected? abort" Write Protected SPI FLASH" +; : use-spi-flash-read ( -- ) ['] read-spi-flash to flash-read ; @@ -319,6 +354,7 @@ ['] write-spi-flash to flash-write ['] verify-spi-flash to flash-verify ['] erase-spi-block to flash-erase-block + ['] spi-protect to flash-protect use-spi-flash-read \ Might be overridden h# 10.0000 to /flash /spi-eblock to /flash-block

1 0

[commit] r2509 - cpu/arm/mmp2
by repository service 15 Sep '11

15 Sep '11

Author: quozl Date: Thu Sep 15 07:39:43 2011 New Revision: 2509 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2509 Log: OLPC XO-1.75 - avoid turning off thermal sensor watchdog reset during watchdog configuration, add thermal sensor watchdog test script Modified: cpu/arm/mmp2/thermal.fth cpu/arm/mmp2/watchdog.fth Modified: cpu/arm/mmp2/thermal.fth ============================================================================== --- cpu/arm/mmp2/thermal.fth Wed Sep 14 00:43:10 2011 (r2508) +++ cpu/arm/mmp2/thermal.fth Thu Sep 15 07:39:43 2011 (r2509) @@ -7,7 +7,7 @@ 3 h# 015090 io! \ Enable clocks to thermal sensor h# 10000 thermal-base io! \ Enable sensing ; - + : cpu-temperature ( -- celcius ) 0 ( acc ) d# 100 0 do ( acc ) \ Accumulate 100 samples @@ -21,6 +21,35 @@ d# 52940 - d# 196 / ( celcius ) ; + +thermal-base h# 4 + value wd-thresh +: wd-thresh@ ( -- n ) wd-thresh io@ ; +: wd-thresh! ( n -- ) wd-thresh io! ; + +: .thermal + ." degrees=" cpu-temperature .d + ." raw=" thermal-base io@ h# 3ff and . + ." threshold=" wd-thresh@ h# 3ff and . +; + +: test-thermal + .thermal cr + + \ save the threshold set by cforth + thermal-base 4 + io@ >r + + \ temporarily set the threshold close to current value + thermal-base io@ h# 3ff and 8 + wd-thresh! + + begin + (cr .thermal kill-line d# 500 ms key? + until key drop cr + + \ restore the threshold + r> wd-thresh! + .thermal cr +; + stand-init: Thermal sensor init-thermal-sensor ; Modified: cpu/arm/mmp2/watchdog.fth ============================================================================== --- cpu/arm/mmp2/watchdog.fth Wed Sep 14 00:43:10 2011 (r2508) +++ cpu/arm/mmp2/watchdog.fth Thu Sep 15 07:39:43 2011 (r2509) @@ -1,10 +1,10 @@ \ See license at end of file purpose: System reset using the watchdog timer +main-pmu-pa h# 200 + constant wdtpcr : enable-wdt-clock main-pmu-pa h# 1020 + dup io@ h# 10 or swap io! \ enable wdt 2 clock PMUM_PRR_PJ - 7 main-pmu-pa h# 200 + io! - 3 main-pmu-pa h# 200 + io! + wdtpcr io@ dup h# 7 or wdtpcr io! h# 3 or wdtpcr io! ; h# 080000 value wdt-pa @@ -17,7 +17,7 @@ : wdt-reset ( -- ) enable-wdt-clock 2 h# 68 wdt! \ set match register - 3 h# 64 wdt! \ match enable: just interrupt, no reset yet + 3 h# 64 wdt! \ match enable: enable counting, enable reset 1 h# 98 wdt! \ Reset counter begin again ; @@ -26,7 +26,7 @@ : test-wdt ( -- ) enable-wdt-clock h# 100 h# 68 wdt! \ set match register - 1 h# 64 wdt! \ match enable: just interrupt, no reset yet + 1 h# 64 wdt! \ match enable: enable counting, no reset yet h# 6c wdt@ . d# 100 ms h# 6c wdt@ . ; [then]

1 0

[commit] r2508 - cpu/x86/pc/olpc/via
by repository service 14 Sep '11

14 Sep '11

Author: quozl Date: Wed Sep 14 00:43:10 2011 New Revision: 2508 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2508 Log: OLPC XO-1.75 - fix stack imbalance in fs-verify Modified: cpu/x86/pc/olpc/via/fsverify.fth Modified: cpu/x86/pc/olpc/via/fsverify.fth ============================================================================== --- cpu/x86/pc/olpc/via/fsverify.fth Wed Sep 14 00:38:52 2011 (r2507) +++ cpu/x86/pc/olpc/via/fsverify.fth Wed Sep 14 00:43:10 2011 (r2508) @@ -69,7 +69,7 @@ t-hms( also fs-verify-commands - ['] include-file catch dup if + ['] include-file catch ?dup if ( x error ) nip .error then previous

1 0

[commit] r2507 - cpu/x86/pc/olpc/via
by repository service 14 Sep '11

14 Sep '11

Author: quozl Date: Wed Sep 14 00:38:52 2011 New Revision: 2507 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2507 Log: OLPC XO-1.75 - use correct timing commencement word, because secure fs-update, and normal fs-verify, displayed incorrect elapsed time because different timers are used for different resolutions on XO-1.75 Modified: cpu/x86/pc/olpc/via/fsupdate.fth cpu/x86/pc/olpc/via/fsverify.fth Modified: cpu/x86/pc/olpc/via/fsupdate.fth ============================================================================== --- cpu/x86/pc/olpc/via/fsupdate.fth Tue Sep 13 05:31:18 2011 (r2506) +++ cpu/x86/pc/olpc/via/fsupdate.fth Wed Sep 14 00:38:52 2011 (r2507) @@ -252,7 +252,7 @@ open-nand ( adr len ) \ clear-context nand-commands - t( + t-hms( also nand-commands ( adr len ) true to secure-fsupdate? ( adr len ) Modified: cpu/x86/pc/olpc/via/fsverify.fth ============================================================================== --- cpu/x86/pc/olpc/via/fsverify.fth Tue Sep 13 05:31:18 2011 (r2506) +++ cpu/x86/pc/olpc/via/fsverify.fth Wed Sep 14 00:38:52 2011 (r2507) @@ -67,7 +67,7 @@ over file ! linefeed line-delimiter c! ( fd fd' ) file ! ( fd ) - t( + t-hms( also fs-verify-commands ['] include-file catch dup if nip .error

1 0

[commit] r2506 - cpu/x86/pc/olpc
by repository service 13 Sep '11

13 Sep '11

Author: quozl Date: Tue Sep 13 05:31:18 2011 New Revision: 2506 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2506 Log: OLPC XO - fix stack imbalance when bad firmware image file detected, image length left behind. Modified: cpu/x86/pc/olpc/security.fth Modified: cpu/x86/pc/olpc/security.fth ============================================================================== --- cpu/x86/pc/olpc/security.fth Mon Sep 12 04:06:15 2011 (r2505) +++ cpu/x86/pc/olpc/security.fth Tue Sep 13 05:31:18 2011 (r2506) @@ -968,7 +968,8 @@ tuck flash-buf swap move ( len ) - ['] ?image-valid catch ?dup if ( ) + ['] ?image-valid catch ?dup if ( x error# ) + nip visible red-letters ." Bad firmware image file - " .error

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

openfirmware September 2011