Author: wmb Date: Fri Sep 16 23:35:08 2011 New Revision: 2518 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2518
Log: OLPC XO-1.75 - Improvements to suspend code for better DCON handling.
Modified: cpu/arm/mmp2/dramrecal.fth cpu/arm/olpc/1.75/devices.fth cpu/arm/olpc/1.75/lcd.fth dev/olpc/dcon/mmp2dcon.fth
Modified: cpu/arm/mmp2/dramrecal.fth ============================================================================== --- cpu/arm/mmp2/dramrecal.fth Fri Sep 16 02:47:50 2011 (r2517) +++ cpu/arm/mmp2/dramrecal.fth Fri Sep 16 23:35:08 2011 (r2518) @@ -327,9 +327,9 @@
\ Security processor setup sleep-depth 4 >= if \ state at least POWER_MODE_CHIP_SLEEP (turn off most of SoC) -\ h# fe08.6000 0 mpmu! \ In SP, set AXISD, resvd, SLPEN, SPSD, DDRCORSD, APBSD resvd, VCXOSD + h# fe08.6000 0 mpmu! \ In SP, set AXISD, resvd, SLPEN, SPSD, DDRCORSD, APBSD resvd, VCXOSD \ We keep PMUM_BBDP (bit 25) off because that saves 60 mW - h# fc08.6000 0 mpmu! \ In SP, set AXISD, resvd, SLPEN, SPSD, DDRCORSD, APBSD resvd, VCXOSD +\ h# fc08.6000 0 mpmu! \ In SP, set AXISD, resvd, SLPEN, SPSD, DDRCORSD, APBSD resvd, VCXOSD then
sleep-depth 3 = if \ state at least POWER_MODE_APPS_SLEEP (turn off slow IO) @@ -396,26 +396,28 @@ : keyboard-power-off ( -- ) d# 148 gpio-set ; : wlan-power-on ( -- ) d# 34 gpio-set ; : wlan-power-off ( -- ) d# 34 gpio-clr ; -: dcon-power-on ( -- ) 1 h# 26 ec-cmd-b! ; -: dcon-power-off ( -- ) 0 h# 26 ec-cmd-b! ; -h# ffff value sleep-mask +0 value sleep-mask : screen-off - sleep-mask 1 and if h# 12 " mode!" $call-screen then \ DCON power down - 0 h# 190 " lcd!" $call-screen - 0 h# 4c pmua! \ Kill the display clocks - saves 100 mW - \ 0 h# 54 pmua! \ Kill the SDIO 0 clocks - insignificant savings - \ 0 h# 58 pmua! \ Kill the SDIO 1 clocks - insignificant savings - sleep-mask 2 and if dcon-power-off then \ saves 80 mW - sleep-mask 4 and if keyboard-power-off then \ Should save about 17 mW - sleep-mask 8 and if wlan-power-off then \ saves 100 mW + sleep-mask 1 and if \ DCON power down + dcon-freeze + else + " dcon-suspend" $call-screen + then + " suspend" $call-screen + \ 0 h# 54 pmua! \ Kill the SDIO 0 clocks - insignificant savings + \ 0 h# 58 pmua! \ Kill the SDIO 1 clocks - insignificant savings + sleep-mask 2 and 0= if keyboard-power-off then \ Should save about 17 mW + sleep-mask 4 and 0= if wlan-power-off then \ saves 100 mW ; : screen-on ( -- ) - sleep-mask 8 and if wlan-power-on then - sleep-mask 4 and if keyboard-power-on then - sleep-mask 2 and if dcon-power-on d# 50 ms then \ saves 80 mW - h# 71b h# 4c pmua! - h# 8001100 h# 190 " lcd!" $call-screen - sleep-mask 1 and if h# 69 " mode!" $call-screen then \ DCON power up + sleep-mask 4 and 0= if wlan-power-on then + sleep-mask 2 and 0= if keyboard-power-on then + " resume" $call-screen + sleep-mask 1 and if \ DCON power up + dcon-unfreeze + else + " dcon-resume" $call-screen + then ;
: stdin-idle-on ['] safe-idle to stdin-idle d# 15 enable-interrupt ;
Modified: cpu/arm/olpc/1.75/devices.fth ============================================================================== --- cpu/arm/olpc/1.75/devices.fth Fri Sep 16 02:47:50 2011 (r2517) +++ cpu/arm/olpc/1.75/devices.fth Fri Sep 16 23:35:08 2011 (r2518) @@ -396,9 +396,6 @@
fload ${BP}/cpu/arm/mmp2/thermal.fth
-fload ${BP}/cpu/arm/mmp2/dramrecal.fth -fload ${BP}/cpu/arm/mmp2/rtc.fth \ Internal RTC, used for wakeups - \ LICENSE_BEGIN \ Copyright (c) 2010 FirmWorks \
Modified: cpu/arm/olpc/1.75/lcd.fth ============================================================================== --- cpu/arm/olpc/1.75/lcd.fth Fri Sep 16 02:47:50 2011 (r2517) +++ cpu/arm/olpc/1.75/lcd.fth Fri Sep 16 23:35:08 2011 (r2518) @@ -2,12 +2,18 @@ : lcd@ ( offset -- l ) lcd-pa + io@ ; : lcd! ( l offset -- ) lcd-pa + io! ;
-: init-lcd ( -- ) +: lcd-clock! ( n -- ) pmua-disp-clk-sel + h# 4c pmua! ; +: lcd-clocks-on ( -- ) \ Turn on clocks - h# 08 pmua-disp-clk-sel + h# 28284c io! - h# 09 pmua-disp-clk-sel + h# 28284c io! - h# 19 pmua-disp-clk-sel + h# 28284c io! - h# 1b pmua-disp-clk-sel + h# 28284c io! + h# 08 lcd-clock! + h# 09 lcd-clock! + h# 19 lcd-clock! + h# 1b lcd-clock! +; +: lcd-clocks-off ( -- ) 0 lcd-clock! ; + +: init-lcd ( -- ) + lcd-clocks-on
0 h# 190 lcd! \ Disable LCD DMA controller fb-mem-pa h# f4 lcd! \ Frame buffer area 0 @@ -205,3 +211,13 @@ 2drop ( ) flush-cursor-bits ( ) ; +0 value saved-mode +: suspend ( -- ) + h# 190 lcd@ to saved-mode + 0 h# 190 lcd! + lcd-clocks-off +; +: resume ( -- ) + lcd-clocks-on + saved-mode h# 190 lcd! +;
Modified: dev/olpc/dcon/mmp2dcon.fth ============================================================================== --- dev/olpc/dcon/mmp2dcon.fth Fri Sep 16 02:47:50 2011 (r2517) +++ dev/olpc/dcon/mmp2dcon.fth Fri Sep 16 23:35:08 2011 (r2518) @@ -223,6 +223,22 @@ dcon-enable ( maybe-set-cmos ) \ dcon-enable leaves mode set to 69 - 40:antialias, 20:swizzle, 8:backlight on, 1:passthru off ; +: dcon-power-on ( -- ) 1 h# 26 ec-cmd-b! ; +: dcon-power-off ( -- ) 0 h# 26 ec-cmd-b! ; +0 value saved-dcon-mode +0 value saved-brightness +: dcon-suspend ( -- ) + bright@ to saved-brightness + mode@ to saved-dcon-mode + h# 12 mode! + dcon-power-off +; +: dcon-resume ( -- ) + dcon-power-on d# 50 ms + dcon-setup + saved-dcon-mode mode! + saved-brightness bright! +;
\ LICENSE_BEGIN \ Copyright (c) 2010 FirmWorks