openfirmware

openfirmware@openfirmware.info

3007 discussions

[commit] r3360 - dev
by repository service 11 Oct '12

11 Oct '12

Author: quozl Date: Thu Oct 11 08:03:46 2012 New Revision: 3360 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3360 Log: OLPC WLAN driver - extend antenna testing to 8787 Modified: dev/libertas.fth Modified: dev/libertas.fth ============================================================================== --- dev/libertas.fth Thu Oct 11 02:55:36 2012 (r3359) +++ dev/libertas.fth Thu Oct 11 08:03:46 2012 (r3360) @@ -651,7 +651,7 @@ dup h# 2 and if ." PS;" then dup h# 8 and if ." EEPROM does not exit;" then dup h# 30 and case - h# 00 of ." TX antanna 0;" endof + h# 00 of ." TX antenna 0;" endof h# 10 of ." TX antenna 1;" endof ( default ) ." TX diversity; " endcase @@ -792,6 +792,16 @@ respbuf >fw-data 4 + le-l@ ; +0 [if] +: reg-access! ( n reg cmd -- ) + 8 swap prepare-cmd + ACTION_SET +xw + ( n reg ) +xw + ( n ) +xl + outbuf-wait drop +; +[then] + : bbp-reg@ ( reg -- n ) 1a ( CMD_BBP_REG_ACCESS ) reg-access@ h# ff and ; @@ -801,6 +811,18 @@ : mac-reg@ ( reg -- n ) 19 ( CMD_MAC_REG_ACCESS ) reg-access@ ; +0 [if] +: bbp-reg! ( n reg -- ) + 1a ( CMD_BBP_REG_ACCESS ) reg-access! +; +: rf-reg! ( n reg -- ) + 1b ( CMD_RF_REG_ACCESS ) reg-access! +; +: mac-reg! ( n reg -- ) + 19 ( CMD_MAC_REG_ACCESS ) reg-access! +; +[then] + : eeprom-l@ ( idx -- n ) a 59 ( CMD_EEPROM_ACCESS ) prepare-cmd ACTION_GET +xw @@ -2314,12 +2336,22 @@ ." snr" 3 .r ." nf" 4 .r ( ) ; +: show-rssi ( -- ) + get-rssi ( base avg_nf avg_snr nf snr ) + ." now" .rssi ( base avg_nf avg_snr ) + ." avg" .rssi ( base ) +; + : .antenna ( antenna -- ) dup h# ffff = if ." d" drop exit then \ diversity (default) dup h# 100 = if ." ?" drop exit then \ occurs after 0/0 2 .r ; +: show-antenna + get-antenna ." ant" .antenna +; + : .rx-antenna ( antenna -- ) 6 rshift case @@ -2340,18 +2372,32 @@ endcase ; -: show-antenna ( -- ) - base @ ( base ) - get-rssi ( base avg_nf avg_snr nf snr ) - decimal - ." now" .rssi ( base avg_nf avg_snr ) - ." avg" .rssi ( base ) - get-antenna ( base antenna ) - hex - ." ant" .antenna ( base ) - ." rx " h# 3f bbp-reg@ .rx-antenna ( base ) - ." tx " h# 40 bbp-reg@ .tx-antenna ( base ) - base ! +: show-antenna-bbp ( -- ) + ." rx " h# 3f bbp-reg@ .rx-antenna + ." tx " h# 40 bbp-reg@ .tx-antenna +; + +0 value #antennae +: ta-init ( -- ) + get-hw-spec 0= if d# 16 + le-w@ to #antennae then + #antennae + case + d# 1 of ." keys: (a,s,q)" endof + d# 2 of ." keys: (0,1,2,3,d,a,s,q)" endof + endcase + cr +; + +: ta-show ( -- ) + base @ ( base ) + decimal ( base ) + show-rssi ( base ) + #antennae d# 1 <> if ( base ) + hex ( base ) + show-antenna ( base ) + show-antenna-bbp ( base ) + then ( base ) + base ! ( ) ; : ta-scan ( -- ) @@ -2360,20 +2406,37 @@ 0= if drop .ssids cr then ( ) ; +: ta-n ( n -- ) + #antennae d# 2 = if + ." antenna to" dup . + set-antenna cr + else + drop + then +; + +: ta-d + #antennae d# 2 = if + ." diversity " set-antenna-diversity cr + then +; + +: ta-a ." associate " close open drop ; + : test-antenna ( -- ) - ." keys: (0,1,2,3,d,a,s,q)" cr + ta-init begin - d# 100 ms show-antenna key? if + d# 100 ms ta-show key? if cr key case h# 71 ( q ) of ." quit" exit endof - h# 1b of exit endof - h# 30 ( 0 ) of ." antenna to 0 " 0 set-antenna cr endof - h# 31 ( 1 ) of ." antenna to 1 " 1 set-antenna cr endof - h# 32 ( 2 ) of ." antenna to 2 " 2 set-antenna cr endof - h# 33 ( 3 ) of ." antenna to 3 " 3 set-antenna cr endof - h# 64 ( d ) of ." diversity " set-antenna-diversity cr endof - h# 61 ( a ) of ." associate " close open drop endof + h# 1b of exit endof + h# 30 ( 0 ) of 0 ta-n endof + h# 31 ( 1 ) of 1 ta-n endof + h# 32 ( 2 ) of 2 ta-n endof + h# 33 ( 3 ) of 3 ta-n endof + h# 64 ( d ) of ta-d endof + h# 61 ( a ) of ta-a endof h# 73 ( s ) of ta-scan endof endcase then

1 0

[commit] r3359 - cpu/arm/olpc cpu/arm/olpc/1.75 cpu/arm/olpc/3.0 cpu/arm/olpc/4.0 cpu/arm/olpc/cl4 dev/olpc/spiflash
by repository service 11 Oct '12

11 Oct '12

Author: quozl Date: Thu Oct 11 02:55:36 2012 New Revision: 3359 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3359 Log: OLPC - make SPI and EC flash animation scale calculation at run time, tested on XO-4 Modified: cpu/arm/olpc/1.75/config-a1.fth cpu/arm/olpc/1.75/config.fth cpu/arm/olpc/3.0/config.fth cpu/arm/olpc/4.0/config.fth cpu/arm/olpc/cl4/config.fth cpu/arm/olpc/edi.fth dev/olpc/spiflash/spiflash.fth dev/olpc/spiflash/spiui.fth Modified: cpu/arm/olpc/1.75/config-a1.fth ============================================================================== --- cpu/arm/olpc/1.75/config-a1.fth Thu Oct 11 00:12:48 2012 (r3358) +++ cpu/arm/olpc/1.75/config-a1.fth Thu Oct 11 02:55:36 2012 (r3359) @@ -30,7 +30,6 @@ char 3 constant expected-ec-version h# 10000 constant /ec-flash -d# 1 constant ec-scale h# 10000 constant l2-#sets Modified: cpu/arm/olpc/1.75/config.fth ============================================================================== --- cpu/arm/olpc/1.75/config.fth Thu Oct 11 00:12:48 2012 (r3358) +++ cpu/arm/olpc/1.75/config.fth Thu Oct 11 02:55:36 2012 (r3359) @@ -32,7 +32,6 @@ char 4 constant expected-ec-version h# 8000 constant /ec-flash -d# 0 constant ec-scale h# 7e80 constant ec-flags-offset \ don't program or verify this page \ These constants are correct for XO-1.75 and XO-CL4; they might Modified: cpu/arm/olpc/3.0/config.fth ============================================================================== --- cpu/arm/olpc/3.0/config.fth Thu Oct 11 00:12:48 2012 (r3358) +++ cpu/arm/olpc/3.0/config.fth Thu Oct 11 02:55:36 2012 (r3359) @@ -31,7 +31,6 @@ char 4 constant expected-ec-version h# 8000 constant /ec-flash -d# 0 constant ec-scale h# 18000 constant console-uart-base Modified: cpu/arm/olpc/4.0/config.fth ============================================================================== --- cpu/arm/olpc/4.0/config.fth Thu Oct 11 00:12:48 2012 (r3358) +++ cpu/arm/olpc/4.0/config.fth Thu Oct 11 02:55:36 2012 (r3359) @@ -29,7 +29,6 @@ char 7 constant expected-ec-version h# ec00 constant /ec-flash -d# 1 constant ec-scale h# eb80 constant ec-flags-offset \ don't program or verify this page fload ${BP}/cpu/arm/olpc/cl4/gpiopins.fth Modified: cpu/arm/olpc/cl4/config.fth ============================================================================== --- cpu/arm/olpc/cl4/config.fth Thu Oct 11 00:12:48 2012 (r3358) +++ cpu/arm/olpc/cl4/config.fth Thu Oct 11 02:55:36 2012 (r3359) @@ -28,7 +28,6 @@ char 7 constant expected-ec-version h# ec00 constant /ec-flash -d# 1 constant ec-scale h# eb80 constant ec-flags-offset \ don't program or verify this page fload ${BP}/cpu/arm/olpc/cl4/gpiopins.fth Modified: cpu/arm/olpc/edi.fth ============================================================================== --- cpu/arm/olpc/edi.fth Thu Oct 11 00:12:48 2012 (r3358) +++ cpu/arm/olpc/edi.fth Thu Oct 11 02:55:36 2012 (r3359) @@ -195,6 +195,11 @@ wait-flash-busy ( ) ; +: .edi-progress ( n -- ) + /ec-flash h# 8000 > if 1 else 0 then rshift ( dot# ) + edi-progress ( ) +; + : edi-program-flash ( adr len offset -- ) cr ( adr len offset ) swap 0 ?do ( adr offset ) @@ -203,7 +208,7 @@ dup i + erase-page ( adr offset ) over i + over i + edi-program-page ( adr offset ) then ( adr offset ) - i ec-scale rshift edi-progress ( adr offset ) + i .edi-progress ( adr offset ) /flash-page +loop ( adr offset ) 2drop ( ) ; Modified: dev/olpc/spiflash/spiflash.fth ============================================================================== --- dev/olpc/spiflash/spiflash.fth Thu Oct 11 00:12:48 2012 (r3358) +++ dev/olpc/spiflash/spiflash.fth Thu Oct 11 02:55:36 2012 (r3359) @@ -297,9 +297,8 @@ \ those commands. The AB command seems to be supported by all \ of them, so it's a good starting point. -0 value flash-scale -: 2mb-flash ( -- ) h# 20.0000 to /flash 6 to flash-scale ; -: 1mb-flash ( -- ) h# 10.0000 to /flash 5 to flash-scale ; +: 2mb-flash ( -- ) h# 20.0000 to /flash ; +: 1mb-flash ( -- ) h# 10.0000 to /flash ; 0 value spi-id# : spi-identify ( -- ) Modified: dev/olpc/spiflash/spiui.fth ============================================================================== --- dev/olpc/spiflash/spiui.fth Thu Oct 11 00:12:48 2012 (r3358) +++ dev/olpc/spiflash/spiui.fth Thu Oct 11 02:55:36 2012 (r3359) @@ -11,7 +11,8 @@ defer spi-progress ' drop to spi-progress ( n -- ) : .progress ( offset -- ) - flash-scale rshift dup spi-progress h# 400 + spi-progress + /flash h# 10.0000 > if 6 else 5 then rshift ( dot# ) + dup spi-progress h# 400 + spi-progress ( ) ; : write-flash-range ( adr end-offset start-offset -- )

1 0

[commit] r3358 - in cpu/arm: mmp2 olpc olpc/4.0
by repository service 10 Oct '12

10 Oct '12

Author: rsmith Date: Thu Oct 11 00:12:48 2012 New Revision: 3358 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3358 Log: OLPC ARM: Update strp so it gets a valid suspend power reading Use the ec-sus-pwr command rather than ec-max-pwr for getting the power when the host is in suspend. ec-sus-pwr only takes a reading if the EC thinks the host is in suspend. Even with that a more delay was required for the time spent in suspend than what wake1 was providing. The EC only samples the gauge every 100ms and the gauge itself only updates every 88ms. Wake1 was setting up a 1 second rtc wakeup but by the time the host actually makes it into suspend the EC didn't have enough time left to get a good consistent reading. This patch makes a wake2 with a 2 second target and updates the suspend test to use it. Modified: cpu/arm/mmp2/rtc.fth cpu/arm/olpc/4.0/ec-version.fth cpu/arm/olpc/suspend.fth Modified: cpu/arm/mmp2/rtc.fth ============================================================================== --- cpu/arm/mmp2/rtc.fth Wed Oct 10 21:24:16 2012 (r3357) +++ cpu/arm/mmp2/rtc.fth Thu Oct 11 00:12:48 2012 (r3358) @@ -40,13 +40,14 @@ 5 enable-interrupt ( ) ; : wake1 ( -- ) ['] cancel-alarm 1 rtc-wake ; +: wake2 ( -- ) ['] cancel-alarm 2 rtc-wake ; : alarm-in-3 ( -- ) ['] take-alarm 3 rtc-wake ; : wakeup-loop ( -- ) d# 1000000 0 do 0 d# 13 at-xy i .d 5 0 do cr i . - wake1 strp + wake2 strp d# 500 ms key? if unloop unloop exit then loop Modified: cpu/arm/olpc/4.0/ec-version.fth ============================================================================== --- cpu/arm/olpc/4.0/ec-version.fth Wed Oct 10 21:24:16 2012 (r3357) +++ cpu/arm/olpc/4.0/ec-version.fth Thu Oct 11 00:12:48 2012 (r3358) @@ -1,6 +1,6 @@ \ The EC microcode macro: EC_PLATFORM cl4 -macro: EC_VERSION 7_0_2_02 +macro: EC_VERSION 7_0_2_03 \ Alternate command for getting EC microcode, for testing new versions. \ Temporarily uncomment the line and modify the path as necessary Modified: cpu/arm/olpc/suspend.fth ============================================================================== --- cpu/arm/olpc/suspend.fth Wed Oct 10 21:24:16 2012 (r3357) +++ cpu/arm/olpc/suspend.fth Thu Oct 11 00:12:48 2012 (r3358) @@ -215,4 +215,4 @@ platform-on ; -: strp ( -- ) ec-rst-pwr str ec-max-pwr .d ." mW " soc .% space ; +: strp ( -- ) ec-rst-pwr str ec-sus-pwr .d ." mW " soc .% space ;

1 0

[commit] r3357 - cpu/arm/olpc/4.0
by repository service 10 Oct '12

10 Oct '12

Author: wmb Date: Wed Oct 10 21:24:16 2012 New Revision: 3357 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3357 Log: Q7B03 Modified: cpu/arm/olpc/4.0/fw-version.fth Modified: cpu/arm/olpc/4.0/fw-version.fth ============================================================================== --- cpu/arm/olpc/4.0/fw-version.fth Wed Oct 10 21:20:29 2012 (r3356) +++ cpu/arm/olpc/4.0/fw-version.fth Wed Oct 10 21:24:16 2012 (r3357) @@ -1,7 +1,7 @@ \ The overall firmware revision macro: FW_PREFIX Q7 macro: FW_MAJOR B -macro: FW_MINOR 02 +macro: FW_MINOR 03 \ Create a 2-character build/fw-suffix file to personalize your test builds " fw-suffix" $file-exists? [if]

1 0

[commit] r3356 - in cpu/arm: mmp2 olpc
by repository service 10 Oct '12

10 Oct '12

Author: wmb Date: Wed Oct 10 21:20:29 2012 New Revision: 3356 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3356 Log: OLPC ARM - add DMA mux to IRQ device tree nodes and refer to it in the audio driver. Modified: cpu/arm/mmp2/irq.fth cpu/arm/olpc/sound.fth Modified: cpu/arm/mmp2/irq.fth ============================================================================== --- cpu/arm/mmp2/irq.fth Wed Oct 10 08:12:31 2012 (r3355) +++ cpu/arm/mmp2/irq.fth Wed Oct 10 21:20:29 2012 (r3356) @@ -95,6 +95,7 @@ h# 160 h# 178 d# 51 2 make-mux-node \ intcmux51 - HSI_CAWAKE(1?), MIPI_HSI_INT1 h# 188 h# 184 d# 55 2 make-mux-node \ intcmux55 - HSA_CAWAKE(0?), MIPI_HSI_INT0 [then] + h# 128 h# 11c d# 48 d# 24 make-mux-node \ DMA mux - 16 PDMA, 4 ADMA, 2 VDMA channels 0 [if] new-device Modified: cpu/arm/olpc/sound.fth ============================================================================== --- cpu/arm/olpc/sound.fth Wed Oct 10 08:12:31 2012 (r3355) +++ cpu/arm/olpc/sound.fth Wed Oct 10 21:20:29 2012 (r3356) @@ -39,6 +39,10 @@ h# 900 +audio h# 100 reg 5 encode-int 4 encode-int encode+ " mmp-mav-dma-channels" property " marvell,mmp-audio-dma" +compatible + + " /interrupt-controller@128" encode-phandle " interrupt-parent" property + d# 20 encode-int d# 21 encode-int encode+ " interrupts" property + " disabled" " status" string-property current-device ( adma1-ph ) finish-device @@ -61,6 +65,10 @@ h# 800 +audio h# 100 reg 3 encode-int 2 encode-int encode+ " mmp-mav-dma-channels" property " marvell,mmp-audio-dma" +compatible + + " /interrupt-controller@128" encode-phandle " interrupt-parent" property + d# 18 encode-int d# 19 encode-int encode+ " interrupts" property + current-device ( adma0-ph ) finish-device

1 0

[commit] r3355 - cpu/arm/olpc cpu/arm/olpc/1.75 cpu/arm/olpc/3.0 cpu/arm/olpc/4.0 cpu/arm/olpc/cl4 dev/olpc/spiflash
by repository service 10 Oct '12

10 Oct '12

Author: quozl Date: Wed Oct 10 08:12:31 2012 New Revision: 3355 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3355 Log: OLPC - adjust SPI and EC flash animation for larger parts, tested on XO-4 Modified: cpu/arm/olpc/1.75/config-a1.fth cpu/arm/olpc/1.75/config.fth cpu/arm/olpc/3.0/config.fth cpu/arm/olpc/4.0/config.fth cpu/arm/olpc/cl4/config.fth cpu/arm/olpc/edi.fth dev/olpc/spiflash/spiflash.fth dev/olpc/spiflash/spiui.fth Modified: cpu/arm/olpc/1.75/config-a1.fth ============================================================================== --- cpu/arm/olpc/1.75/config-a1.fth Thu Oct 4 21:19:25 2012 (r3354) +++ cpu/arm/olpc/1.75/config-a1.fth Wed Oct 10 08:12:31 2012 (r3355) @@ -29,7 +29,8 @@ d# 9999 constant machine-type \ Backwards compatibility with non-device-tree kernel char 3 constant expected-ec-version -h# 10000 value /ec-flash +h# 10000 constant /ec-flash +d# 1 constant ec-scale h# 10000 constant l2-#sets Modified: cpu/arm/olpc/1.75/config.fth ============================================================================== --- cpu/arm/olpc/1.75/config.fth Thu Oct 4 21:19:25 2012 (r3354) +++ cpu/arm/olpc/1.75/config.fth Wed Oct 10 08:12:31 2012 (r3355) @@ -32,6 +32,7 @@ char 4 constant expected-ec-version h# 8000 constant /ec-flash +d# 0 constant ec-scale h# 7e80 constant ec-flags-offset \ don't program or verify this page \ These constants are correct for XO-1.75 and XO-CL4; they might Modified: cpu/arm/olpc/3.0/config.fth ============================================================================== --- cpu/arm/olpc/3.0/config.fth Thu Oct 4 21:19:25 2012 (r3354) +++ cpu/arm/olpc/3.0/config.fth Wed Oct 10 08:12:31 2012 (r3355) @@ -30,7 +30,8 @@ d# 10000 constant machine-type \ Backwards compatibility with non-device-tree kernel char 4 constant expected-ec-version -h# 8000 value /ec-flash +h# 8000 constant /ec-flash +d# 0 constant ec-scale h# 18000 constant console-uart-base Modified: cpu/arm/olpc/4.0/config.fth ============================================================================== --- cpu/arm/olpc/4.0/config.fth Thu Oct 4 21:19:25 2012 (r3354) +++ cpu/arm/olpc/4.0/config.fth Wed Oct 10 08:12:31 2012 (r3355) @@ -29,6 +29,7 @@ char 7 constant expected-ec-version h# ec00 constant /ec-flash +d# 1 constant ec-scale h# eb80 constant ec-flags-offset \ don't program or verify this page fload ${BP}/cpu/arm/olpc/cl4/gpiopins.fth Modified: cpu/arm/olpc/cl4/config.fth ============================================================================== --- cpu/arm/olpc/cl4/config.fth Thu Oct 4 21:19:25 2012 (r3354) +++ cpu/arm/olpc/cl4/config.fth Wed Oct 10 08:12:31 2012 (r3355) @@ -28,6 +28,7 @@ char 7 constant expected-ec-version h# ec00 constant /ec-flash +d# 1 constant ec-scale h# eb80 constant ec-flags-offset \ don't program or verify this page fload ${BP}/cpu/arm/olpc/cl4/gpiopins.fth Modified: cpu/arm/olpc/edi.fth ============================================================================== --- cpu/arm/olpc/edi.fth Thu Oct 4 21:19:25 2012 (r3354) +++ cpu/arm/olpc/edi.fth Wed Oct 10 08:12:31 2012 (r3355) @@ -203,7 +203,7 @@ dup i + erase-page ( adr offset ) over i + over i + edi-program-page ( adr offset ) then ( adr offset ) - i edi-progress ( adr offset ) + i ec-scale rshift edi-progress ( adr offset ) /flash-page +loop ( adr offset ) 2drop ( ) ; Modified: dev/olpc/spiflash/spiflash.fth ============================================================================== --- dev/olpc/spiflash/spiflash.fth Thu Oct 4 21:19:25 2012 (r3354) +++ dev/olpc/spiflash/spiflash.fth Wed Oct 10 08:12:31 2012 (r3355) @@ -297,8 +297,9 @@ \ those commands. The AB command seems to be supported by all \ of them, so it's a good starting point. -: 2mb-flash ( -- ) h# 20.0000 to /flash ; -: 1mb-flash ( -- ) h# 10.0000 to /flash ; +0 value flash-scale +: 2mb-flash ( -- ) h# 20.0000 to /flash 6 to flash-scale ; +: 1mb-flash ( -- ) h# 10.0000 to /flash 5 to flash-scale ; 0 value spi-id# : spi-identify ( -- ) Modified: dev/olpc/spiflash/spiui.fth ============================================================================== --- dev/olpc/spiflash/spiui.fth Thu Oct 4 21:19:25 2012 (r3354) +++ dev/olpc/spiflash/spiui.fth Wed Oct 10 08:12:31 2012 (r3355) @@ -11,7 +11,7 @@ defer spi-progress ' drop to spi-progress ( n -- ) : .progress ( offset -- ) - 5 rshift dup spi-progress h# 400 + spi-progress + flash-scale rshift dup spi-progress h# 400 + spi-progress ; : write-flash-range ( adr end-offset start-offset -- )

1 0

Booting a USB device when unsupported by the BIOS
by Mark Morgan Lloyd 08 Oct '12

08 Oct '12

For an older computer which doesn't boot from external (e.g. USB) devices but will load OFW from floppy or a sacrificial disc partition, and which is then able to see an external USB-connected CD-ROM drive, is there a generic command to tell it to boot from a CD (containing e.g. Linux or Windows) or would this rely too heavily on BIOS facilities that are unavailable once OFW is running? Alternatively, given probe-usb output of USB2 devices: USB1 devices: /pci/usb@7,2/cdrom@0,0 /pci/usb@7,2/cdrom@0,0/disk how can I best look at the media to determine the name of kernel, initrd etc., and subsequently convert those into boot-device, boot-file, ramdisk etc. parameters? I've tried dir /pci/usb@7,2/cdrom@0,0/disk@0:0 etc. but the disc spins for a while and then reports iso9660-file-system. I'm trying to write this up to answer an FAQ on a private conferencing system I use. -- Mark Morgan Lloyd markMLl .AT. telemetry.co .DOT. uk [Opinions above are the author's, not those of his employers or colleagues]

1 0

[commit] r3354 - cpu/arm/olpc
by repository service 04 Oct '12

04 Oct '12

Author: wmb Date: Thu Oct 4 21:19:25 2012 New Revision: 3354 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3354 Log: OLPC Trac #12135 - oops last checkin had a typo. Modified: cpu/arm/olpc/build-fw.fth Modified: cpu/arm/olpc/build-fw.fth ============================================================================== --- cpu/arm/olpc/build-fw.fth Thu Oct 4 21:13:06 2012 (r3353) +++ cpu/arm/olpc/build-fw.fth Thu Oct 4 21:19:25 2012 (r3354) @@ -172,7 +172,7 @@ fload ${BP}/cpu/x86/pc/olpc/mfgtree.fth \ Manufacturing data in device tree fload ${BP}/dev/olpc/kb3700/eccmds.fth -: dcon-off ( -- ) dcon-if if " dcon-off" $call-dcon then ; +: dcon-off ( -- ) dcon-ih if " dcon-off" $call-dcon then ; : stand-power-off ( -- ) dcon-off ec-power-off begin wfi again ; ' stand-power-off to power-off

1 0

[commit] r3353 - cpu/arm/olpc
by repository service 04 Oct '12

04 Oct '12

Author: wmb Date: Thu Oct 4 21:13:06 2012 New Revision: 3353 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3353 Log: OLPC Trac #12135 - turn off DCON only if it is already on. Modified: cpu/arm/olpc/build-fw.fth Modified: cpu/arm/olpc/build-fw.fth ============================================================================== --- cpu/arm/olpc/build-fw.fth Wed Oct 3 23:59:49 2012 (r3352) +++ cpu/arm/olpc/build-fw.fth Thu Oct 4 21:13:06 2012 (r3353) @@ -172,7 +172,7 @@ fload ${BP}/cpu/x86/pc/olpc/mfgtree.fth \ Manufacturing data in device tree fload ${BP}/dev/olpc/kb3700/eccmds.fth -: dcon-off " dcon-off" $call-dcon ; +: dcon-off ( -- ) dcon-if if " dcon-off" $call-dcon then ; : stand-power-off ( -- ) dcon-off ec-power-off begin wfi again ; ' stand-power-off to power-off

1 0

[commit] r3352 - dev/mmc/sdhci/mv8686
by repository service 03 Oct '12

03 Oct '12

Author: wmb Date: Wed Oct 3 23:59:49 2012 New Revision: 3352 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3352 Log: OLPC x86 - fixed build regression for platforms where the WLAN driver is in FCode. Modified: dev/mmc/sdhci/mv8686/sdio.fth Modified: dev/mmc/sdhci/mv8686/sdio.fth ============================================================================== --- dev/mmc/sdhci/mv8686/sdio.fth Wed Oct 3 23:59:11 2012 (r3351) +++ dev/mmc/sdhci/mv8686/sdio.fth Wed Oct 3 23:59:49 2012 (r3352) @@ -20,7 +20,11 @@ instance defer get-ctrl-port ( -- port# ) instance defer get-write-port ( -- port# ) -0 0 2value default-fw$ +\ FCode doesn't have 2value so we do it this way +0 value fw-adr +0 value fw-len +: default-fw$ ( -- adr len ) fw-adr fw-len ; +: set-default-fw$ ( adr len -- ) to fw-len to fw-adr ; 0 value ioport d# 256 constant blksz \ Block size for data tx/rx @@ -90,7 +94,7 @@ ['] 0 to get-ctrl-port ['] 0 to get-write-port - " rom:sd8686.bin" to default-fw$ + " rom:sd8686.bin" set-default-fw$ " mv8686" ?set-module-property \ This really depends on the firmware that we load, but we don't want @@ -173,7 +177,7 @@ ['] mv8787-rx-ready? to rx-ready? ['] mv8787-get-ctrl-port to get-ctrl-port ['] mv8787-get-write-port to get-write-port - " rom:mv8787.bin" to default-fw$ + " rom:mv8787.bin" set-default-fw$ " mv8787" ?set-module-property false to helper? true to multifunction?

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

openfirmware