openfirmware

openfirmware@openfirmware.info

3007 discussions

[commit] r3487 - dev/mmc/sdhci/mv8686
by repository service 13 Dec '12

13 Dec '12

Author: wmb Date: Thu Dec 13 01:19:45 2012 New Revision: 3487 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3487 Log: Marvell WLAN driver - moved the host interrupt mask setting code earlier in the startup sequence to make newer 8787 firmware happy. Also fixed a name collision that was causing (harmless) compilation warnings. Modified: dev/mmc/sdhci/mv8686/fw8686.fth dev/mmc/sdhci/mv8686/sdio.fth Modified: dev/mmc/sdhci/mv8686/fw8686.fth ============================================================================== --- dev/mmc/sdhci/mv8686/fw8686.fth Wed Dec 12 23:59:24 2012 (r3486) +++ dev/mmc/sdhci/mv8686/fw8686.fth Thu Dec 13 01:19:45 2012 (r3487) @@ -72,7 +72,6 @@ fw-download-ok? 0= if true exit then - 3 host-int-mask-reg 1 sdio-reg! \ Enable upload (1) and download (2) mv8787? if 2 config-reg 1 sdio-reg! \ Host power up then Modified: dev/mmc/sdhci/mv8686/sdio.fth ============================================================================== --- dev/mmc/sdhci/mv8686/sdio.fth Wed Dec 12 23:59:24 2012 (r3486) +++ dev/mmc/sdhci/mv8686/sdio.fth Thu Dec 13 01:19:45 2012 (r3487) @@ -21,10 +21,10 @@ instance defer get-write-port ( -- port# ) \ FCode doesn't have 2value so we do it this way -0 value fw-adr -0 value fw-len -: default-fw$ ( -- adr len ) fw-adr fw-len ; -: set-default-fw$ ( adr len -- ) to fw-len to fw-adr ; +0 value fw-name-adr +0 value fw-name-len +: default-fw$ ( -- adr len ) fw-name-adr fw-name-len ; +: set-default-fw$ ( adr len -- ) to fw-name-len to fw-name-adr ; 0 value ioport d# 256 constant blksz \ Block size for data tx/rx @@ -226,11 +226,14 @@ \ Set host interrupt reset to "read to clear" host-int-rsr-reg 1 sdio-reg@ h# 3f or host-int-rsr-reg 1 sdio-reg! -\ 3 host-int-mask-reg 1 sdio-reg! \ Enable upload (1) and download (2) - \ Set Dnld/upld to "auto reset" card-misc-cfg-reg 1 sdio-reg@ h# 10 or card-misc-cfg-reg 1 sdio-reg! then + \ Newer revisions of the 8787 firmware empirically require that this + \ be enabled early, before firmware download. Older versions, and + \ 8686 firmware, appear to be content with it either here or after + \ firmware startup. + 3 host-int-mask-reg 1 sdio-reg! \ Enable upload (1) and download (2) ; : sdio-blocks@ ( adr len -- actual )

1 0

[commit] r3486 - dev/olpc
by repository service 12 Dec '12

12 Dec '12

Author: wmb Date: Wed Dec 12 23:59:24 2012 New Revision: 3486 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3486 Log: SETi camera driver - changed frame rate to 25 Hz to better match the 50 Hz refresh rate of the OLPC DCON, at the suggestion of the SETi FAE. Modified: dev/olpc/seti.fth Modified: dev/olpc/seti.fth ============================================================================== --- dev/olpc/seti.fth Wed Dec 12 22:56:34 2012 (r3485) +++ dev/olpc/seti.fth Wed Dec 12 23:59:24 2012 (r3486) @@ -20,7 +20,7 @@ 00 20 ov! \ P_BNKT 01 21 ov! \ P_HBNKT 01 22 ov! \ P_ROWFIL - 01 23 ov! \ P_VBNKT + 65 23 ov! \ P_VBNKT - 01 for 30 fps, 65 for 25 fps \ AE 01 00 ov! @@ -29,7 +29,7 @@ 78 13 ov! \ CWF target 0x74 78 14 ov! \ A target 0x74 04 1E ov! \ ini gain 0x04 - 7d 34 ov! + 96 34 ov! \ STST - 7d for 30 fps, 96 for 25 FPS 60 40 ov! \ Max x8 d4 70 ov! \ anti-sat on

1 0

[commit] r3485 - dev/olpc
by repository service 12 Dec '12

12 Dec '12

Author: wmb Date: Wed Dec 12 22:56:34 2012 New Revision: 3485 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3485 Log: SETi camera driver - fixed regression in which r3484 accidentally undid the effect of r3478. Modified: dev/olpc/seti.fth Modified: dev/olpc/seti.fth ============================================================================== --- dev/olpc/seti.fth Wed Dec 12 09:18:07 2012 (r3484) +++ dev/olpc/seti.fth Wed Dec 12 22:56:34 2012 (r3485) @@ -24,7 +24,7 @@ \ AE 01 00 ov! - 14 11 ov! \ (04) 30fps at lowlux; (14) 6fps at lowlux + 04 11 ov! \ Keep (04) 30fps at lowlux; (14) 6fps at lowlux 78 12 ov! \ D65 target 0x74 78 13 ov! \ CWF target 0x74 78 14 ov! \ A target 0x74

1 0

[commit] r3484 - dev/olpc
by repository service 12 Dec '12

12 Dec '12

Author: wmb Date: Wed Dec 12 09:18:07 2012 New Revision: 3484 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3484 Log: SETi camera driver - set undocumented bank 0 register 0x13 to avoid dark spots in the middle of overexposed areas. Modified: dev/olpc/seti.fth Modified: dev/olpc/seti.fth ============================================================================== --- dev/olpc/seti.fth Tue Dec 11 19:03:12 2012 (r3483) +++ dev/olpc/seti.fth Wed Dec 12 09:18:07 2012 (r3484) @@ -13,6 +13,7 @@ 34 10 ov! 27 11 ov! 21 12 ov! + 17 13 ov! ce 16 ov! aa 17 ov! @@ -23,7 +24,7 @@ \ AE 01 00 ov! - 04 11 ov! \ Keep 30fps at lowlux (14 for 6fps) + 14 11 ov! \ (04) 30fps at lowlux; (14) 6fps at lowlux 78 12 ov! \ D65 target 0x74 78 13 ov! \ CWF target 0x74 78 14 ov! \ A target 0x74

1 0

[commit] r3483 - in cpu/arm/olpc: 1.75 cl4
by repository service 11 Dec '12

11 Dec '12

Author: wmb Date: Tue Dec 11 19:03:12 2012 New Revision: 3483 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3483 Log: OLPC XO-1.75 and XO-4 - trac 12385 - add "no-1-8-v" property to external SDHCI nodes. Modified: cpu/arm/olpc/1.75/sdhci.fth cpu/arm/olpc/cl4/sdhci.fth Modified: cpu/arm/olpc/1.75/sdhci.fth ============================================================================== --- cpu/arm/olpc/1.75/sdhci.fth Fri Dec 7 23:20:57 2012 (r3482) +++ cpu/arm/olpc/1.75/sdhci.fth Tue Dec 11 19:03:12 2012 (r3483) @@ -9,6 +9,7 @@ d# 31 encode-int " clk-delay-cycles" property fload ${BP}/dev/mmc/sdhci/slot.fth d# 39 " interrupts" integer-property + 0 0 encode-bytes " no-1-8-v" property " /pmua" encode-phandle 3 encode-int encode+ " clocks" property " PXA-SDHCLK" " clock-names" string-property Modified: cpu/arm/olpc/cl4/sdhci.fth ============================================================================== --- cpu/arm/olpc/cl4/sdhci.fth Fri Dec 7 23:20:57 2012 (r3482) +++ cpu/arm/olpc/cl4/sdhci.fth Tue Dec 11 19:03:12 2012 (r3483) @@ -7,6 +7,7 @@ d# 15 encode-int " clk-delay-cycles" property fload ${BP}/dev/mmc/sdhci/slot.fth d# 39 " interrupts" integer-property + 0 0 encode-bytes " no-1-8-v" property " /pmua" encode-phandle 3 encode-int encode+ " clocks" property " PXA-SDHCLK" " clock-names" string-property

1 0

[commit] r3482 - cpu/arm/olpc
by repository service 07 Dec '12

07 Dec '12

Author: quozl Date: Fri Dec 7 23:20:57 2012 New Revision: 3482 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3482 Log: OLPC XO-1.75 XO-4 - accelerometer informal tests fail second time when the formal test is used between them, fixed by closing accelerometer device after informal tests. #12365. Modified: cpu/arm/olpc/roller.fth Modified: cpu/arm/olpc/roller.fth ============================================================================== --- cpu/arm/olpc/roller.fth Fri Dec 7 07:12:24 2012 (r3481) +++ cpu/arm/olpc/roller.fth Fri Dec 7 23:20:57 2012 (r3482) @@ -56,7 +56,7 @@ : get-acceleration ( -- x y z ) " acceleration@" accel-ih $call-method xyz>fraction ; -: init-accelerometer ( -- ) +: open-accelerometer ( -- ) accel-ih if exit then " /accelerometer" open-dev to accel-ih accel-ih 0= abort" Can't open accelerometer" @@ -70,6 +70,9 @@ 1 4 a/b>fraction xyz* to acc-0 [then] ; +: close-accelerometer ( -- ) + accel-ih close-dev 0 to accel-ih +; \ This is a damping factor for the velocity - essentially a frictional force @@ -246,12 +249,13 @@ 0 0 0 to vel-b ( 0 0 0 to vel-l ) ; : roller ( -- ) - init-accelerometer + open-accelerometer init-ball text-off clear-drawing begin ( update-laptop ) update-ball d# 50 ms key? until text-on + close-accelerometer ; : filtered-acceleration ( -- acc-x,y,z ) @@ -326,7 +330,7 @@ then ; : clinometer ( -- ) - init-accelerometer + open-accelerometer init-ball cursor-off clear-drawing @@ -336,6 +340,7 @@ ( update-laptop ) update-angle d# 50 ms key? until cursor-on + close-accelerometer ; : level ( -- ) clinometer

1 0

[commit] r3481 - cpu/arm/olpc/4.0
by repository service 07 Dec '12

07 Dec '12

Author: quozl Date: Fri Dec 7 07:12:24 2012 New Revision: 3481 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3481 Log: Q7B08 Modified: cpu/arm/olpc/4.0/fw-version.fth Modified: cpu/arm/olpc/4.0/fw-version.fth ============================================================================== --- cpu/arm/olpc/4.0/fw-version.fth Fri Dec 7 06:09:54 2012 (r3480) +++ cpu/arm/olpc/4.0/fw-version.fth Fri Dec 7 07:12:24 2012 (r3481) @@ -1,7 +1,7 @@ \ The overall firmware revision macro: FW_PREFIX Q7 macro: FW_MAJOR B -macro: FW_MINOR 07 +macro: FW_MINOR 08 \ Create a 2-character build/fw-suffix file to personalize your test builds " fw-suffix" $file-exists? [if]

1 0

[commit] r3480 - dev
by repository service 07 Dec '12

07 Dec '12

Author: quozl Date: Fri Dec 7 06:09:54 2012 New Revision: 3480 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3480 Log: OLPC - libertas, add unused eeprom dump helper Modified: dev/libertas.fth Modified: dev/libertas.fth ============================================================================== --- dev/libertas.fth Fri Dec 7 06:08:04 2012 (r3479) +++ dev/libertas.fth Fri Dec 7 06:09:54 2012 (r3480) @@ -829,11 +829,26 @@ a 59 ( CMD_EEPROM_ACCESS ) prepare-cmd ACTION_GET +xw ( idx ) +xw - 4 +xw + 4 +xw \ maximum h# 10 outbuf-wait if 0 exit then respbuf >fw-data 6 + le-l@ ; +[ifdef] notdef + : eeprom-dump + 400 0 do + i 8 .r ." : " + a 59 ( CMD_EEPROM_ACCESS ) prepare-cmd + ACTION_GET +xw \ Action + i +xw \ Offset + 10 +xw \ Byte Count + outbuf-wait if unloop exit then + respbuf >fw-data 6 + + dup 8 cdump space 8 + 8 cdump cr + 10 +loop + ; +[then] + \ ========================================================================= \ Miscellaneous control settings \ =========================================================================

1 0

[commit] r3479 - cpu/arm/mmp2
by repository service 07 Dec '12

07 Dec '12

Author: quozl Date: Fri Dec 7 06:08:04 2012 New Revision: 3479 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3479 Log: OLPC XO-4 - fix banner CPU speed for 1.2 GHz SKUs Modified: cpu/arm/mmp2/clocks.fth Modified: cpu/arm/mmp2/clocks.fth ============================================================================== --- cpu/arm/mmp2/clocks.fth Fri Dec 7 02:26:52 2012 (r3478) +++ cpu/arm/mmp2/clocks.fth Fri Dec 7 06:08:04 2012 (r3479) @@ -41,8 +41,18 @@ : pll2-ungated? ( -- flag ) h# 4000 h# 1024 +mpmu io@ and ; -: pll2-fbdiv ( -- N ) h# 34 mpmu@ d# 10 rshift h# 1ff and 2+ ; -: pll2-refdiv ( -- M ) h# 34 mpmu@ d# 19 rshift h# 1f and 2+ ; +: pll2-fbdiv ( -- N ) + h# 34 mpmu@ d# 10 rshift h# 1ff and +[ifdef] olpc-cl2 + 2+ +[then] +; +: pll2-refdiv ( -- M ) + h# 34 mpmu@ d# 19 rshift h# 1f and +[ifdef] olpc-cl2 + 2+ +[then] +; : fccr@ ( -- n ) h# 05.0008 io@ ; : fccr! ( n -- ) h# 05.0008 io! ; @@ -95,7 +105,12 @@ case 0 of d# 400,000,000 pj4-clkdiv 1+ / endof ( hz ) 1 of d# 800,000,000 endof ( hz ) +[ifdef] olpc-cl2 2 of d# 26,000,000 pll2-fbdiv pll2-refdiv */ endof ( hz ) +[then] +[ifdef] olpc-cl4 + 2 of d# 13,000,000 pll2-fbdiv pll2-refdiv */ endof ( hz ) +[then] 3 of d# 1,063,000,000 endof ( hz ) endcase d# 1,000,000 / ( mhz )

1 0

[commit] r3478 - dev/olpc
by repository service 07 Dec '12

07 Dec '12

Author: wmb Date: Fri Dec 7 02:26:52 2012 New Revision: 3478 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3478 Log: Seti camera driver - changed register settings to match the Linux driver ones, except for register 0x111 which is currently set at the value for 30fps under low light conditions. The Linux driver changed that value in commit ddb0abd and then reverted it in commit 2b6599b. Modified: dev/olpc/seti.fth Modified: dev/olpc/seti.fth ============================================================================== --- dev/olpc/seti.fth Fri Dec 7 02:22:53 2012 (r3477) +++ dev/olpc/seti.fth Fri Dec 7 02:26:52 2012 (r3478) @@ -13,7 +13,7 @@ 34 10 ov! 27 11 ov! 21 12 ov! - c6 16 ov! + ce 16 ov! aa 17 ov! 00 20 ov! \ P_BNKT @@ -23,11 +23,11 @@ \ AE 01 00 ov! - 14 11 ov! \ 6fps at lowlux + 04 11 ov! \ Keep 30fps at lowlux (14 for 6fps) 78 12 ov! \ D65 target 0x74 78 13 ov! \ CWF target 0x74 78 14 ov! \ A target 0x74 - 08 1E ov! \ ini gain 0x08 + 04 1E ov! \ ini gain 0x04 7d 34 ov! 60 40 ov! \ Max x8 @@ -107,8 +107,8 @@ \ IDP 03 00 ov! ff 10 ov! - 1d 11 ov! - cb 12 ov! + 1d 11 ov! \ Change PIXDATA on falling edge of clock for better timing + 3d 12 ov! \ YUV422 setting; changed later if RGB565 04 14 ov! \ don't change \ DPCNR @@ -283,7 +283,7 @@ ( r: ycrcb? ) r> 0= if ( ) 03 00 ov! \ IDP - cb 12 ov! \ RGB565 setting (same as yCrCb setting?) + cb 12 ov! \ RGB565 setting then ;

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

openfirmware