openfirmware

openfirmware@openfirmware.info

3007 discussions

[commit] r3517 - dev/usb2/device/serial
by repository service 11 Jan '13

11 Jan '13

Author: quozl Date: Fri Jan 11 08:23:07 2013 New Revision: 3517 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3517 Log: usbserial - start the read again next time the device is opened, fixes re-use of USB serial devices by applications, without this change the read path yields no data on subsequent open because the bulk in is not set up. Modified: dev/usb2/device/serial/uart.fth Modified: dev/usb2/device/serial/uart.fth ============================================================================== --- dev/usb2/device/serial/uart.fth Tue Jan 8 06:07:44 2013 (r3516) +++ dev/usb2/device/serial/uart.fth Fri Jan 11 08:23:07 2013 (r3517) @@ -60,6 +60,7 @@ rts-dtr-off end-bulk-in free-buf + false to read-started? then ;

1 0

[commit] r3516 - cpu/arm/olpc/4.0
by repository service 08 Jan '13

08 Jan '13

Author: quozl Date: Tue Jan 8 06:07:44 2013 New Revision: 3516 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3516 Log: Q7B11 Modified: cpu/arm/olpc/4.0/fw-version.fth Modified: cpu/arm/olpc/4.0/fw-version.fth ============================================================================== --- cpu/arm/olpc/4.0/fw-version.fth Tue Jan 8 06:06:54 2013 (r3515) +++ cpu/arm/olpc/4.0/fw-version.fth Tue Jan 8 06:07:44 2013 (r3516) @@ -1,7 +1,7 @@ \ The overall firmware revision macro: FW_PREFIX Q7 macro: FW_MAJOR B -macro: FW_MINOR 10 +macro: FW_MINOR 11 \ Create a 2-character build/fw-suffix file to personalize your test builds " fw-suffix" $file-exists? [if]

1 0

[commit] r3515 - cpu/arm/olpc/4.0
by repository service 08 Jan '13

08 Jan '13

Author: rsmith Date: Tue Jan 8 06:06:54 2013 New Revision: 3515 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3515 Log: OLPC XO-4 - EC Code 0.3.08 Modified: cpu/arm/olpc/4.0/ec-version.fth Modified: cpu/arm/olpc/4.0/ec-version.fth ============================================================================== --- cpu/arm/olpc/4.0/ec-version.fth Tue Jan 8 03:44:19 2013 (r3514) +++ cpu/arm/olpc/4.0/ec-version.fth Tue Jan 8 06:06:54 2013 (r3515) @@ -1,6 +1,6 @@ \ The EC microcode macro: EC_PLATFORM cl4 -macro: EC_VERSION 7_0_3_07 +macro: EC_VERSION 7_0_3_08 \ Alternate command for getting EC microcode, for testing new versions. \ Temporarily uncomment the line and modify the path as necessary

1 0

[commit] r3514 - cpu/arm/olpc cpu/x86/pc/olpc dev/olpc/dcon
by repository service 08 Jan '13

08 Jan '13

Author: quozl Date: Tue Jan 8 03:44:19 2013 New Revision: 3514 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3514 Log: OLPC XO-4 - rework DCON freeze and unfreeze screen synchronisation, make wait-output global as requested by John. Modified: cpu/arm/olpc/suspend.fth cpu/x86/pc/olpc/disptest.fth cpu/x86/pc/olpc/gui.fth dev/olpc/dcon/mmp2dcon.fth Modified: cpu/arm/olpc/suspend.fth ============================================================================== --- cpu/arm/olpc/suspend.fth Mon Jan 7 08:05:08 2013 (r3513) +++ cpu/arm/olpc/suspend.fth Tue Jan 8 03:44:19 2013 (r3514) @@ -132,11 +132,11 @@ 0 value sleep-mask : screen-sleep sleep-mask 1 and if \ DCON power down - dcon-freeze + dcon-screen-freeze else " dcon-suspend" $call-dcon + " sleep" $call-screen then - " sleep" $call-screen " set-ack" $call-ec \ 0 h# 54 pmua! \ Kill the SDIO 0 clocks - insignificant savings @@ -156,10 +156,10 @@ then sleep-mask 2 and 0= if keyboard-power-on then " clr-ack" $call-ec - " wake" $call-screen sleep-mask 1 and if \ DCON power up - dcon-unfreeze + dcon-screen-unfreeze else + " wake" $call-screen " dcon-resume" $call-dcon then ; Modified: cpu/x86/pc/olpc/disptest.fth ============================================================================== --- cpu/x86/pc/olpc/disptest.fth Mon Jan 7 08:05:08 2013 (r3513) +++ cpu/x86/pc/olpc/disptest.fth Tue Jan 8 03:44:19 2013 (r3514) @@ -173,9 +173,9 @@ ; : wait ( -- ) hold-time - dcon-freeze + dcon-screen-freeze hold-time - dcon-unfreeze + dcon-screen-unfreeze hold-time2 ; Modified: cpu/x86/pc/olpc/gui.fth ============================================================================== --- cpu/x86/pc/olpc/gui.fth Mon Jan 7 08:05:08 2013 (r3513) +++ cpu/x86/pc/olpc/gui.fth Tue Jan 8 03:44:19 2013 (r3514) @@ -355,9 +355,12 @@ $show ( ) ; -: frozen? ( -- flag ) " vga?" $call-dcon 0= ; -: dcon-freeze ( -- ) " dcon-freeze" $call-dcon d# 30 ms ; -: dcon-unfreeze ( -- ) " dcon-unfreeze" $call-dcon d# 30 ms ; +: frozen? ( -- flag ) " vga?" $call-dcon 0= ; +: dcon-freeze ( -- ) " dcon-freeze" $call-dcon ; +: dcon-unfreeze ( -- ) " dcon-unfreeze" $call-dcon ; +: wait-output ( -- ) " wait-output" $call-dcon ; +: dcon-screen-freeze ( -- ) " screen-freeze" $call-dcon ; +: dcon-screen-unfreeze ( -- ) " screen-unfreeze" $call-dcon ; \ === Stuff moved from security.fth === Modified: dev/olpc/dcon/mmp2dcon.fth ============================================================================== --- dev/olpc/dcon/mmp2dcon.fth Mon Jan 7 08:05:08 2013 (r3513) +++ dev/olpc/dcon/mmp2dcon.fth Tue Jan 8 03:44:19 2013 (r3514) @@ -136,9 +136,6 @@ dup vga? = if drop exit then ( source ) dup to vga? ( source ) if - wait-output \ Wait for the DCON to reach the scan line - " wake" $call-screen \ Enable video signal from SoC - d# 25 ms dcon-load \ Put the DCON in VGA-refreshed mode d# 25 ms \ Ensure that that DCON sees the DCONLOAD high else @@ -151,13 +148,25 @@ \ We got a false ack from the DCON so start over from LOAD state dcon-load d# 25 ms ( ) repeat ( ) - " sleep" $call-screen + d# 25 ms then then ; : dcon-freeze ( -- ) 0 set-source ; : dcon-unfreeze ( -- ) 1 set-source ; +: screen-freeze ( -- ) + dcon-freeze + " sleep" $call-screen +; + +: screen-unfreeze ( -- ) + wait-output \ Wait for the DCON to reach the scan line + " wake" $call-screen \ Enable video signal from SoC + d# 42 ms \ Synchronisation delay determined empirically + dcon-unfreeze +; + \ gx_configure_tft(info); : try-dcon! ( w reg# -- ) @@ -285,15 +294,20 @@ then ; -[ifdef] notdef +\ [ifdef] notdef : test-dcon-freeze-glitch - screen-ih remove-output + invisible " gvsr" $call-screen - begin dcon-freeze dcon-unfreeze key? until key drop - screen-ih add-output + begin + " screen-freeze" $call-dcon + d# 25 ms + " screen-unfreeze" $call-dcon + key? + until key drop + visible page ; -[then] +\ [then] \ LICENSE_BEGIN \ Copyright (c) 2010 FirmWorks

1 0

[commit] r3513 - dev/olpc/dcon
by repository service 07 Jan '13

07 Jan '13

Author: quozl Date: Mon Jan 7 08:05:08 2013 New Revision: 3513 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3513 Log: OLPC ARM - DCON unfreeze glitch reduction on 1.2 GHz SKUs. Increased the delay between waking screen and enabling DCONLOAD. Set scan line register in device setup. Solves #12394. Does not change #12377. Modified: dev/olpc/dcon/mmp2dcon.fth Modified: dev/olpc/dcon/mmp2dcon.fth ============================================================================== --- dev/olpc/dcon/mmp2dcon.fth Sun Jan 6 04:39:45 2013 (r3512) +++ dev/olpc/dcon/mmp2dcon.fth Mon Jan 7 08:05:08 2013 (r3513) @@ -87,12 +87,13 @@ 0 value color? \ COLOUR d# 850 value resumeline +: scanint-set resumeline scanint! ; : mark-time ( -- start-time ) get-msecs ; : delta-ms ( start-time -- elapsed-ms ) mark-time swap - ; : wait-output ( -- ) mark-time ( start-time ) - resumeline scanint! setup-dcon-irq scanint-on ( ) + setup-dcon-irq scanint-on ( ) begin ( start-time ) dcon-irq? if ( start-time ) setup-dcon-irq ( start-time ) @@ -137,7 +138,7 @@ if wait-output \ Wait for the DCON to reach the scan line " wake" $call-screen \ Enable video signal from SoC - d# 5 ms + d# 25 ms dcon-load \ Put the DCON in VGA-refreshed mode d# 25 ms \ Ensure that that DCON sees the DCONLOAD high else @@ -219,6 +220,7 @@ h# 0101 h# 42 dcon! h# 12 mode! + scanint-set false ; : dcon-enable ( -- ) @@ -247,6 +249,7 @@ \ Unnecessary because CForth has already done it \ dcon-load dcon-enable ( maybe-set-cmos ) \ dcon-enable leaves mode set to 69 - 40:antialias, 20:swizzle, 8:backlight on, 1:passthru off + scanint-set true ; [then]

1 0

[commit] r3512 - dev/olpc/mmp2camera
by repository service 06 Jan '13

06 Jan '13

Author: wmb Date: Sun Jan 6 04:39:45 2013 New Revision: 3512 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3512 Log: OLPC camera driver - trac #12436 - turn off camera power domain in open method if sensor not found; fixes failure to suspend. Modified: dev/olpc/mmp2camera/ccic.fth Modified: dev/olpc/mmp2camera/ccic.fth ============================================================================== --- dev/olpc/mmp2camera/ccic.fth Fri Jan 4 05:56:56 2013 (r3511) +++ dev/olpc/mmp2camera/ccic.fth Sun Jan 6 04:39:45 2013 (r3512) @@ -142,7 +142,7 @@ : open ( -- flag ) my-address my-space h# 1000 " map-in" $call-parent to camera-base power-on - sensor-found? 0= if false exit then + sensor-found? 0= if power-off false exit then my-args " yuv" $= to use-ycrcb? alloc-dma-bufs read-setup

1 0

[commit] r3511 - cpu/arm/olpc/1.75
by repository service 04 Jan '13

04 Jan '13

Author: quozl Date: Fri Jan 4 05:56:56 2013 New Revision: 3511 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3511 Log: Q4D26 Modified: cpu/arm/olpc/1.75/fw-version.fth Modified: cpu/arm/olpc/1.75/fw-version.fth ============================================================================== --- cpu/arm/olpc/1.75/fw-version.fth Fri Jan 4 05:55:27 2013 (r3510) +++ cpu/arm/olpc/1.75/fw-version.fth Fri Jan 4 05:56:56 2013 (r3511) @@ -1,7 +1,7 @@ \ The overall firmware revision macro: FW_PREFIX Q4 macro: FW_MAJOR D -macro: FW_MINOR 25 +macro: FW_MINOR 26 \ Create a 2-character build/fw-suffix file to personalize your test builds " fw-suffix" $file-exists? [if]

1 0

[commit] r3510 - in cpu: arm/olpc/1.75 x86/pc/olpc x86/pc/olpc/images
by repository service 04 Jan '13

04 Jan '13

Author: quozl Date: Fri Jan 4 05:55:27 2013 New Revision: 3510 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3510 Log: OLPC XO-1.75 - play sound from file on boot disk, #12128, due to lack of space in SPI FLASH Added: cpu/x86/pc/olpc/images/Beep-Beep-800Hz-8k.wav (contents, props changed) Modified: cpu/arm/olpc/1.75/olpc.bth cpu/x86/pc/olpc/sound.fth Modified: cpu/arm/olpc/1.75/olpc.bth ============================================================================== --- cpu/arm/olpc/1.75/olpc.bth Fri Jan 4 03:50:09 2013 (r3509) +++ cpu/arm/olpc/1.75/olpc.bth Fri Jan 4 05:55:27 2013 (r3510) @@ -82,7 +82,7 @@ " sourceurl" " sourceurl" $add-dropin - " ${BP}/cpu/x86/pc/olpc/images/Edge1-8k-EQ-Comp-Amp-Short.wav" " splash" $add-deflated-dropin + " ${BP}/cpu/x86/pc/olpc/images/Beep-Beep-800Hz-8k.wav" " splash" $add-deflated-dropin " ec.img" " ecimage.bin" $add-deflated-dropin " ${BP}/clients/emacs/x86/emacs.rc" " emacs.rc" $add-deflated-dropin Added: cpu/x86/pc/olpc/images/Beep-Beep-800Hz-8k.wav ============================================================================== Binary file. No diff available. Modified: cpu/x86/pc/olpc/sound.fth ============================================================================== --- cpu/x86/pc/olpc/sound.fth Fri Jan 4 03:50:09 2013 (r3509) +++ cpu/x86/pc/olpc/sound.fth Fri Jan 4 05:55:27 2013 (r3510) @@ -28,12 +28,21 @@ : softer ( -- ) -2 +volume ; : louder ( -- ) 2 +volume ; +" int:\boot\jingle.wav" d# 128 config-string jingle +: sound-name$ ( -- adr len ) + jingle $file-exists? if + jingle + else + " rom:splash" + then +; + : sound ( -- ) get-saved-volume d# -50 <= if exit then playback-volume >r get-saved-volume to playback-volume ['] load-started behavior >r ['] noop to load-started - " rom:splash" ['] $play-wav catch if 2drop then + sound-name$ ['] $play-wav catch if 2drop then r> to load-started r> to playback-volume ;

1 0

[commit] r3509 - dev/olpc/kb3700
by repository service 04 Jan '13

04 Jan '13

Author: quozl Date: Fri Jan 4 03:50:09 2013 New Revision: 3509 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3509 Log: OLPC XO-1.75 XO-4 - bat-status@ gave an EC command result timeout on XO-1.75, caused by EC API version being treated as cross-platform when it should not have been. XO-4 no longer needs EC API version 4 support, so remove it. Modified: dev/olpc/kb3700/eccmds.fth Modified: dev/olpc/kb3700/eccmds.fth ============================================================================== --- dev/olpc/kb3700/eccmds.fth Thu Jan 3 23:54:09 2013 (r3508) +++ dev/olpc/kb3700/eccmds.fth Fri Jan 4 03:50:09 2013 (r3509) @@ -114,24 +114,11 @@ \ Commands that are different for XO-4 -: bat-status16@ ( -- w ) h# 70 ec-cmd-w@ ; [ifdef] olpc-xo4 +: bat-status16@ ( -- w ) h# 70 ec-cmd-w@ ; ' bat-status16@ is bat-status@ [then] -\ until EC 0.3.04 and earlier are purged from prototype population, -\ choose command based on API version reported by EC. -: bat-status@' ( -- w ) - ec-api-ver@ 5 < if - ['] bat-status8@ - else - ['] bat-status16@ - then - is bat-status@ - bat-status@ -; -' bat-status@' is bat-status@ - \ LICENSE_BEGIN \ Copyright (c) 2010 FirmWorks \

1 0

[commit] r3508 - cpu/arm/olpc/1.75
by repository service 03 Jan '13

03 Jan '13

Author: rsmith Date: Thu Jan 3 23:54:09 2013 New Revision: 3508 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3508 Log: OLPC XO-1.75 - EC Code 1.0.01 Modified: cpu/arm/olpc/1.75/ec-version.fth Modified: cpu/arm/olpc/1.75/ec-version.fth ============================================================================== --- cpu/arm/olpc/1.75/ec-version.fth Thu Jan 3 23:51:07 2013 (r3507) +++ cpu/arm/olpc/1.75/ec-version.fth Thu Jan 3 23:54:09 2013 (r3508) @@ -1,6 +1,6 @@ \ The EC microcode macro: EC_PLATFORM cl2 -macro: EC_VERSION 4_1_0_00 +macro: EC_VERSION 4_1_0_01 \ Alternate command for getting EC microcode, for testing new versions. \ Temporarily uncomment the line and modify the path as necessary

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

openfirmware