Author: wmb Date: Thu Aug 18 03:20:23 2011 New Revision: 2465 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2465
Log: OLPC XO-1.5 - Changed the camera test to use CCIR601 instead of CCIR656 transmission format, thus making it sensitive to problems with the VSYNC and HSYNC lines. The new test can also operate in either RBG565 or YCrCb color spaces.
Modified: dev/olpc/viacamera/camera.fth dev/olpc/viacamera/loadpkg.fth dev/olpc/viacamera/ycrcbtorgb.fth dev/via/unichrome/accel2d.fth
Modified: dev/olpc/viacamera/camera.fth ============================================================================== --- dev/olpc/viacamera/camera.fth Wed Aug 17 09:04:49 2011 (r2464) +++ dev/olpc/viacamera/camera.fth Thu Aug 18 03:20:23 2011 (r2465) @@ -30,6 +30,8 @@
\ ============================= camera operations =============================
+0 value use-ycrcb? + false value ov7670-detected?
: ((camera-init) ( -- ) @@ -42,7 +44,7 @@ 13 17 ov! \ Horiz start high bits 01 18 ov! \ Horiz stop high bits b6 32 ov! \ HREF pieces - 0a 19 ov! \ Vert start high bits + 02 19 ov! \ Vert start high bits - !! 02 7a 1a ov! \ Vert stop high bits 0a 03 ov! \ GAIN, VSTART, VSTOP pieces
@@ -61,7 +63,8 @@
\ AGC and AEC parameters e0 13 ov! \ Control 8 - 00 00 ov! \ Gain lower 8 bits + 00 00 ov! \ Gain lower 8 bits !! Linux then sets REG_AECH to 0 + 00 10 ov! 40 0d ov! \ Control 4 magic reserved bit 18 14 ov! \ Control 9: 4x gain + magic reserved bit 05 a5 ov! \ 50hz banding step limit @@ -116,7 +119,7 @@ 12 3b ov! \ Control 11 88 a4 ov! 00 96 ov! 30 97 ov! 20 98 ov! 30 99 ov! 84 9a ov! 29 9b ov! 03 9c ov! - 5c 9d ov! 3f 9e ov! 04 78 ov! + 4c 9d ov! 3f 9e ov! 04 78 ov!
\ Extra-weird stuff. Some sort of multiplexor register 01 79 ov! f0 c8 ov! @@ -134,7 +137,7 @@
\ OVT says that rewrite this works around a bug in 565 mode. \ The symptom of the bug is red and green speckles in the image. - 01 11 ov! \ 30 fps def 80 +\ 01 11 ov! \ 30 fps def 80 !! Linux doesn't do this ;
: config-check ( -- ) @@ -146,7 +149,7 @@ 13 17 ovc \ Horiz start high bits 01 18 ovc \ Horiz stop high bits b6 32 ovc \ HREF pieces - ( 0a 19 ovc ) \ Vert start high bits + 02 19 ovc \ Vert start high bits 7a 1a ovc \ Vert stop high bits 0a 03 ovc \ GAIN, VSTART, VSTOP pieces
@@ -166,6 +169,7 @@ \ AGC and AEC parameters ( e0 13 ovc ) \ Control 8 ( 00 00 ovc ) \ Gain lower 8 bits + ( 00 10 ovc ) \ Automatic exposure control 9:2 40 0d ovc \ Control 4 magic reserved bit ( 18 14 ovc ) \ Control 9: 4x gain + magic reserved bit 05 a5 ovc \ 50hz banding step limit @@ -236,7 +240,7 @@ : init-rgb565 ( -- ) 04 12 ov! \ VGA, RGB565 00 8c ov! \ No RGB444 - 40 04 ov! \ Control 1: CCIR656 (CaFe value is 00) + 00 04 ov! \ Control 1: CCIR601 (H/VSYNC framing) 10 40 ov! \ RGB565 output 38 14 ov! \ 16x gain ceiling b3 4f ov! \ v-red @@ -246,6 +250,10 @@ a7 53 ov! \ u-green e4 54 ov! \ u-blue c0 3d ov! \ Gamma enable, UV saturation auto adjust + + \ OVT says that rewrite this works around a bug in 565 mode. + \ The symptom of the bug is red and green speckles in the image. + 01 11 ov! \ 30 fps def 80 !! Linux doesn't do this ;
: read-agc ( -- n ) @@ -270,7 +278,7 @@
: camera-config ( -- ) ((camera-init) - init-rgb565 + use-ycrcb? 0= if init-rgb565 then d# 490 d# 10 d# 14 d# 158 set-hw \ VGA window info ;
@@ -294,44 +302,11 @@ : 'dma-buf ( i -- virt ) /dma-buf * dma-bufs + ; : 'dma-buf-phys ( i -- phys ) /dma-buf * dma-bufs-phys + ;
-0 [if] -: alloc-dma-bufs ( -- ) - dma-bufs 0= if - /dma-buf #dma-bufs * dup dma-alloc dup to dma-bufs - swap false dma-map-in to dma-bufs-phys - then -; -: free-dma-bufs ( -- ) - dma-bufs ?dup if - /dma-buf #dma-bufs 1+ * 2dup dma-bufs-phys swap dma-map-out - dma-free - 0 to dma-bufs 0 to dma-bufs-phys - then -; +: temp-buf ( -- adr ) #dma-bufs 'dma-buf ;
-: setup-dma ( -- ) - #dma-bufs 0 do - i 'dma-buf-phys 2 or i 4 * 340 + cl! \ Capture frame buffers - loop -; -[else] - -[ifdef] notdef -\ XXX Capture video to video memory only. I don't know why I can't capture to -\ XXX system memory. I'm using an arbitrary offset into the video memory. - -h# 200.0000 constant capture-base
: alloc-dma-bufs ( -- ) dma-bufs 0= if - capture-base dup frame-buffer-adr + to dma-bufs - to dma-bufs-phys - then -; -: free-dma-bufs ( -- ) 0 to dma-bufs 0 to dma-bufs-phys ; -[else] -: alloc-dma-bufs ( -- ) - dma-bufs 0= if /dma-buf #dma-bufs * " alloc-capture-buffer" $call-parent to dma-bufs-phys to dma-bufs then ; @@ -339,16 +314,14 @@ dma-bufs dma-bufs-phys /dma-buf #dma-bufs * " free-capture-buffer" $call-parent 0 to dma-bufs 0 to dma-bufs-phys ; -[then] + : setup-dma ( -- ) #dma-bufs 0 do i 'dma-buf-phys 340 i 4 * + cl! \ Capture frame buffers loop ; -[then]
- -\ VGA RGB565 +\ VGA : setup-image ( -- ) 0 31c cl! \ Active video scaling control 01e2.00f0 334 cl! \ Maximum data count of active video @@ -375,8 +348,10 @@
: (init) ( -- ) 0 300 cl! \ Mask all interrupts - 8850.2114 310 cl! \ Enable CLK, FIFO threshold, UYVY, 8-bit CCIR656, + 8850.2104 310 cl! \ Enable CLK, FIFO threshold, UYVY, 8-bit CCIR601, \ Capture odd/even in interlace, triple buffers + 0620.0120 314 cl! \ Horizontal end and start cycles for CCIR601 + 01de.0000 318 cl! \ Vertical end and start cycles for CCIR601 VGA_WIDTH 2* 350 cl! \ Disable coring and 640*2 stride ;
@@ -446,6 +421,7 @@
: open ( -- flag ) init + my-args " yuv" $= to use-ycrcb? ov7670-detected? 0= if false exit then alloc-dma-bufs read-setup @@ -473,12 +449,21 @@ ; : full-brightness ( -- ) h# f " bright!" $call-parent ;
-: display-frame ( adr -- ) +: display-ycrcb-frame ( adr -- ) + temp-buf VGA_WIDTH VGA_HEIGHT * ycbcr422>rgba8888 + temp-buf VGA_WIDTH 4* ( src-adr src-pitch ) + 0 0 d# 280 d# 210 VGA_WIDTH VGA_HEIGHT " copy32>32" $call-parent +; + +: display-rgb-frame ( adr -- ) VGA_WIDTH 2* ( src-adr src-pitch ) 0 0 d# 280 d# 210 VGA_WIDTH VGA_HEIGHT " copy16>32" $call-parent - autobright ;
+: display-frame ( adr -- ) + use-ycrcb? if display-ycrcb-frame else display-rgb-frame then +\ autobright +; : timeout-read ( adr len timeout -- actual ) >r 0 -rot r> 0 ?do ( actual adr len ) 2dup read ?dup if 3 roll drop -rot leave then
Modified: dev/olpc/viacamera/loadpkg.fth ============================================================================== --- dev/olpc/viacamera/loadpkg.fth Wed Aug 17 09:04:49 2011 (r2464) +++ dev/olpc/viacamera/loadpkg.fth Thu Aug 18 03:20:23 2011 (r2465) @@ -27,6 +27,7 @@ " camera" device-name 0 0 reg \ A reg property makes "test-all" consider this device fload ${BP}/dev/olpc/viacamera/smbus.fth + fload ${BP}/dev/olpc/viacamera/ycrcbtorgb.fth fload ${BP}/dev/olpc/viacamera/camera.fth finish-device
Modified: dev/olpc/viacamera/ycrcbtorgb.fth ============================================================================== --- dev/olpc/viacamera/ycrcbtorgb.fth Wed Aug 17 09:04:49 2011 (r2464) +++ dev/olpc/viacamera/ycrcbtorgb.fth Thu Aug 18 03:20:23 2011 (r2465) @@ -135,7 +135,7 @@ 8 [sp] dec 0= until
- d# 12 [sp] sp lea \ Clean stack - 0 [sp] di xchg \ Restore EDI - 4 [sp] si xchg \ Restore ESI + d# 12 [sp] sp lea \ Clean stack, removing Cr, Cb, and count values + di pop \ Restore EDI + si pop \ Restore ESI c;
Modified: dev/via/unichrome/accel2d.fth ============================================================================== --- dev/via/unichrome/accel2d.fth Wed Aug 17 09:04:49 2011 (r2464) +++ dev/via/unichrome/accel2d.fth Thu Aug 18 03:20:23 2011 (r2465) @@ -55,6 +55,18 @@ r> h# 1c mmio! r> 8 mmio! r> h# 30 mmio! ;
+: copy32>32 ( src-base src-pitch src-x,y dst-x,y w,h -- ) + wh! dst! src! ( src-base src-pitch ) + h# 30 mmio@ >r 8 mmio@ >r ( src-base src-pitch r: reg30 reg8 ) + 3 rshift r@ lwsplit nip wljoin 8 mmio! ( src-base r: reg30 reg8 ) + h# 1c mmio@ >r ( src-base ) + fb-va - 3 rshift h# 1c mmio! ( ) + 0 h# 30 mmio! ( ) \ No color format conversion + h# cc.00.00.01 0 mmio! ( ) \ Perform BLT Output = source + wait-done + r> h# 1c mmio! r> 8 mmio! r> h# 30 mmio! +; + \ some tests 1 [if] : gp-fill-screen ( color -- )
openfirmware@openfirmware.info
-
repository service