[commit] r3011 - in dev/usb2/hcd: . ehci

[repository service]

Author: quozl
Date: Sat Jun 16 04:13:21 2012
New Revision: 3011
URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3011

Log:
OLPC - dev/usb2, read the device descriptor after reset and before set-address, instead of after set-address.  Erase the device descriptor buffer before reading.  #11931

Modified:
   dev/usb2/hcd/device.fth
   dev/usb2/hcd/ehci/probe.fth

Modified: dev/usb2/hcd/device.fth
==============================================================================
--- dev/usb2/hcd/device.fth	Fri Jun 15 03:58:55 2012	(r3010)
+++ dev/usb2/hcd/device.fth	Sat Jun 16 04:13:21 2012	(r3011)
@@ -391,33 +391,30 @@

\ Executed in root hub node context
 : get-str-descriptors  ( -- )
-   language					( lang )
-   dup dev-desc-buf d# 14 + c@ v$-desc-buf get-string to /v$-desc-buf
-   dup dev-desc-buf d# 15 + c@ d$-desc-buf get-string to /d$-desc-buf
-       dev-desc-buf d# 16 + c@ s$-desc-buf get-string to /s$-desc-buf
+   language                                     ( lang )
+   dup d# 14 dev-desc@ v$-desc-buf get-string to /v$-desc-buf
+   dup d# 15 dev-desc@ d$-desc-buf get-string to /d$-desc-buf
+       d# 16 dev-desc@ s$-desc-buf get-string to /s$-desc-buf
 ;

\ Executed in root hub node context
 : refresh-desc-bufs  ( dev -- )
    set-target
-   dev-desc-buf 12 get-dev-desc to /dev-desc-buf		\ Refresh dev-desc-buf
-   cfg-desc-buf  0 get-cfg-desc to /cfg-desc-buf		\ Refresh cfg-desc-buf
+   dev-desc-buf d# 18 get-dev-desc to /dev-desc-buf             \ Refresh dev-desc-buf
+   cfg-desc-buf     0 get-cfg-desc to /cfg-desc-buf             \ Refresh cfg-desc-buf
    get-str-descriptors
 ;

\ Executed in root hub node context
-: get-initial-descriptors  ( dev -- )
-   dev-desc-buf /pipe0 get-dev-desc  if		( dev )
-      dev-desc-buf 7 + c@ 0 rot di-maxpayload!	( )
-   else						( dev )
-      drop					( )
-   then						( )
-   cfg-desc-buf 0 get-cfg-desc to /cfg-desc-buf	( )
+: get-initial-descriptors  ( -- )
+   \ Re-read the full device descriptor to pick up the vendor info
+   dev-desc-buf d# 18 get-dev-desc  drop                ( )
+   cfg-desc-buf     0 get-cfg-desc to /cfg-desc-buf     ( )
 ;

\ Executed in hub node context (root hub or subordinate hub) - creates new child nodes via (make-device-node)
 : make-device-node  ( port dev -- )
-   dup " get-initial-descriptors" my-self $call-method	( port dev )
+   " get-initial-descriptors" my-self $call-method	( port dev )
    /cfg-desc-buf 0=  if  2drop  exit  then		( port dev )
    asso-class?  if  1  else  cfg-desc-buf 4 + c@  then  ( port dev #intf )
    0  ?do				                ( port dev )
@@ -443,6 +440,16 @@
    then                                         ( port )
 ;

+: get-initial-dev-desc  ( dev -- )
+   dev-desc-buf d# 18 erase                     ( dev )
+   dev-desc-buf d# 64 get-dev-desc  0=  if      ( dev )
+      dev-desc-buf /pipe0 get-dev-desc  0=  if  ( dev )
+         drop exit
+      then
+   then
+   7 dev-desc@ 0 rot di-maxpayload!             ( )
+;
+
 \ Executed in the root hub node context
 : setup-new-node  ( port speed hub-port hub-dev -- true | port dev xt false )
   \ Allocate device number
@@ -453,7 +460,11 @@
    tuck di-speed!			( port dev )

0 set-target				( port dev )	\ Address it as device 0
-   over reset-port                	( port dev )	\ Some devices want to be reset here
+
+   \ Some devices (e.g. Lexar USB-to-SD and at least one USB FLASH drive) fail
+   \ on set-address unless you first read the device descriptor from address 0.
+   dup get-initial-dev-desc             ( port dev )
+
    dup set-address  if			( port dev )	\ Assign it usb addr dev
       ." Retrying with a delay" cr
       over reset-port  d# 5000 ms

Modified: dev/usb2/hcd/ehci/probe.fth
==============================================================================
--- dev/usb2/hcd/ehci/probe.fth	Fri Jun 15 03:58:55 2012	(r3010)
+++ dev/usb2/hcd/ehci/probe.fth	Sat Jun 16 04:13:21 2012	(r3011)
@@ -7,18 +7,16 @@
 0 value port-speed

: make-root-hub-node  ( port -- )
-   \ Some devices (e.g. Lexar USB-to-SD) fail unless you get the cfg desc from device 0 first
    0 set-target	\ First address it as device 0	( port )
    port-speed 0 di-speed!     \ Use high speed for getting the device descriptor
-   dev-desc-buf h# 40 get-cfg-desc drop		( port )
-
+   dup reset-port				( port )
    port-speed					( port speed )

\ hub-port and hub-dev route USB 1.1 transactions through USB 2.0 hubs
    over get-hub20-port  get-hub20-dev		( port speed hub-port hub-dev )

\ Execute setup-new-node in root context and make-device-node in hub node context
-   setup-new-node  if  execute  then	( )
+   setup-new-node  if  execute  then		( )
 ;

0 instance value probe-error?  \ Back channel to selftest