[commit] r2199 - cpu/arm/marvell

[repository service]

Author: wmb
Date: Sat May 14 02:49:07 2011
New Revision: 2199
URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2199

Log:
OLPC XO-1.75 - Changed some values for the USB OTG PHY to match values I got from some source code drop.

Modified:
   cpu/arm/marvell/utmiphy.fth

Modified: cpu/arm/marvell/utmiphy.fth
==============================================================================
--- cpu/arm/marvell/utmiphy.fth	Fri May 13 00:09:17 2011	(r2198)
+++ cpu/arm/marvell/utmiphy.fth	Sat May 14 02:49:07 2011	(r2199)
@@ -6,6 +6,7 @@
 h# d420700c constant utmi-tx
 h# d4207010 constant utmi-rx
 h# d4207014 constant utmi-ivref
+h# d4207018 constant utmi-t0

: regset  ( mask adr -- )  tuck l@  or               swap l!  ;
 : regclr  ( mask adr -- )  tuck l@  swap invert and  swap l!  ;
@@ -16,14 +17,16 @@
    loop
    ." PLL calibrate timeout" cr
 ;
-h# 7e03.ffff value pll-clr  \ PLLCALI12, PLLVDD18, PLLVDD12, KVCO, ICP, FBDIV, REFDIV, 
-h# 7e01.aeeb value pll-set  \         3         3         3     3    2     ee       b
+\ h# 7e03.ffff value pll-clr  \ PLLCALI12, PLLVDD18, PLLVDD12, KVCO, ICP, FBDIV, REFDIV, 
+\ h# 7e01.aeeb value pll-set  \         3         3         3     3    2     ee       b
+h# 0003.ffff value pll-clr  \                                KVCO, ICP, FBDIV, REFDIV, 
+h# 7e01.9eeb value pll-set  \         3         3         3     3    1     ee       b

h# 00df.c000 value tx-clr   \ TXVDD12, CK60_PHSEL, IMPCAL_VTH
-h# 00c9.4000 value tx-set   \       3           4           5
+h# 00c8.0000 value tx-set   \       3           4           0

-h# 0001.80f0 value rx-clr   \ REG_SQ_LENGTH, RX_SQ_THRESH
-h# 0001.000a value rx-set   \             2             a
+h# 0000.00f0 value rx-clr   \ RX_SQ_THRESH
+h# 0000.0070 value rx-set   \            7

: init-usb-phy  ( -- )
 [ifdef] notdef
@@ -35,19 +38,27 @@
    \ Turn on the USB PHY power
    h# 1010.0000 utmi-ctrl regset  \ INPKT_DELAY_SOF, PU_REF
    h#         2 utmi-ctrl regset  \ PLL_PWR_UP
+   d# 10 ms
    h#         1 utmi-ctrl regset  \ PWR_UP
+   1 ms
+
+   \ Linux code does this, perhaps redundantly
+   h# 1000.0000 utmi-ctrl regset  \ INPKT_DELAY_SOF, PU_REF
+
+   h# 0000.8000 utmi-t0   regclr  \ REG_FIFO_SQ_RST

\ Configure the PLLs
    pll-clr utmi-pll  regclr  \ PLLCALI12, PLLVDD18, PLLVDD12, KVCO, ICP, FBDIV, REFDIV, 
-   pll-set utmi-pll  regset  \         3         3         3     3    2     ee       b
+   pll-set utmi-pll  regset  \         3         3         3     3    1     ee       b
+   1 ms

tx-clr  utmi-tx   regclr  \ TXVDD12, CK60_PHSEL, IMPCAL_VTH
-   tx-set  utmi-tx   regset  \       3           4           5
+   tx-set  utmi-tx   regset  \       3           4           0

-   rx-clr  utmi-rx   regclr  \ REG_SQ_LENGTH, RX_SQ_THRESH
-   rx-set  utmi-rx   regset  \             2             a
+   rx-clr  utmi-rx   regclr  \ RX_SQ_THRESH
+   rx-set  utmi-rx   regset  \            7

-   d# 10000 wait-cal
+   d# 1000 wait-cal

d# 200 us
    h# 0020.0000 utmi-pll  regset  \ VCOCAL_START