[commit] r3729 - in dev/olpc: . viacamera

[repository service]

Author: quozl
Date: Thu Jun 12 04:46:18 2014
New Revision: 3729
URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3729

Log:
OLPC XO-1.5 - fix siv120d image alignment (#12625), disable siv121c support (#12785)

Modified:
   dev/olpc/seti.fth
   dev/olpc/viacamera/camera.fth

Modified: dev/olpc/seti.fth
==============================================================================
--- dev/olpc/seti.fth	Mon Jun  9 06:43:25 2014	(r3728)
+++ dev/olpc/seti.fth	Thu Jun 12 04:46:18 2014	(r3729)
@@ -6,10 +6,9 @@

\ SNR
    00 00 ov!	\ bank 0
-   00 04 ov!
-   03 05 ov!	\ CHIP_CNTR
-   \ 33 07 ov!
-   32 07 ov!
+   00 04 ov!	\ CNTR_B, enable preview mode
+   03 05 ov!	\ VMODE, VGA 640 x 480
+   32 07 ov!	\ CNTR_C, output drivability control, PCLK 19mA, other 14mA
    34 10 ov!
    27 11 ov!
    21 12 ov!
@@ -17,11 +16,11 @@
    ce 16 ov!
    aa 17 ov!

-   00 20 ov!         \ P_BNKT
+                     \ frame control registers for preview mode
+   00 20 ov!         \ P_BNKT, [5:4] P_HBNKT high bits, [1:0] P_VBNKT high bits
    01 21 ov!         \ P_HBNKT
    01 22 ov!         \ P_ROWFIL
-   65 23 ov!         \ P_VBNKT - 01 for 30 fps, 65 for 25 fps
-                     \ vertical blank time, (siv120d.c uses 01)
+   65 23 ov!         \ P_VBNKT, 01 for 30 fps, 65 for 25 fps (siv120d.c uses 01)

\ AE
    01 00 ov!
@@ -289,6 +288,10 @@
    then
 ;

+\ SIV121C, not supported on XO-1.5,
+\ because sensor maximum clock 27 MHz, and host provides 48 MHz.
+
+[ifndef] olpc-xo-1.5
 : siv121c-config  ( ycrcb? -- )
    >r               ( r: ycrcb? )

@@ -648,6 +651,7 @@
       cb 12 ov!  \ OUTFMT, RGB565 setting
    then
 ;
+[then]

: (set-mirrored)  ( mirrored? -- )
    4 ov@  1                       ( mirrored? reg-value bit )
@@ -659,9 +663,11 @@
    0 0 ov!  (set-mirrored)
 ;

+[ifndef] olpc-xo-1.5
 : siv121c-set-mirrored  ( mirrored? -- )
    1 0 ov!  (set-mirrored)
 ;
+[then]

: probe-seti  ( -- found? )
    h# 33 to camera-smb-slave  ( )
@@ -674,6 +680,7 @@
       false exit              ( -- false )
    then                       ( regval )

+[ifndef] olpc-xo-1.5
    dup h# 95 = if
       " SETi,SIV121C" " sensor" string-property
 [ifdef] set-sensor-properties
@@ -683,6 +690,7 @@
       ['] siv121c-config to camera-config
       drop true exit
    then
+[then]

dup h# 12 =  if
       " SETi,SIV120D" " sensor" string-property

Modified: dev/olpc/viacamera/camera.fth
==============================================================================
--- dev/olpc/viacamera/camera.fth	Mon Jun  9 06:43:25 2014	(r3728)
+++ dev/olpc/viacamera/camera.fth	Thu Jun 12 04:46:18 2014	(r3729)
@@ -70,6 +70,12 @@

: soft-reset  ( -- )  ;

+: ?siv120d  ( -- )
+   ['] camera-config behavior ['] siv120d-config =  if
+      0640.0140 314 cl!         \ Horizontal end and start cycles for siv120d
+   then                         \ (a quirk specific to XO-1.5 and siv120d)
+;
+
 : (init)  ( -- )
    0         300 cl!		\ Mask all interrupts
    8850.2104 310 cl!		\ Enable CLK, FIFO threshold, UYVY, 8-bit CCIR601,
@@ -156,6 +162,7 @@
    init
    my-args " yuv" $=  to use-ycrcb?
    sensor-found? 0=  if  false exit  then
+   ?siv120d
    alloc-dma-bufs
    read-setup
    true