Author: wmb Date: Thu May 19 08:11:17 2011 New Revision: 2202 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2202
Log: OLPC XO-1.5 - Altered DSDT to declare only C2, omitting C3 and C4 power states, only for new Rev L and later boards, which fail when coming out of C3 or C4.
Added: cpu/x86/pc/olpc/via/dsdt-c2only.dsl Modified: cpu/x86/pc/olpc/via/acpi.fth cpu/x86/pc/olpc/via/dsdt.bth cpu/x86/pc/olpc/via/fw-version.fth cpu/x86/pc/olpc/via/olpc.bth
Modified: cpu/x86/pc/olpc/via/acpi.fth ============================================================================== --- cpu/x86/pc/olpc/via/acpi.fth Wed May 18 05:37:42 2011 (r2201) +++ cpu/x86/pc/olpc/via/acpi.fth Thu May 19 08:11:17 2011 (r2202) @@ -285,7 +285,8 @@ \ Copy in the DSDT \ I suppose we could point to it in FLASH - if so don't compress it, \ and fixup the address in the fadt and rechecksum the fadt - " dsdt" find-drop-in 0= abort" No DSDT " ( adr len ) + board-revision h# d78 >= if " dsdt-c2only" else " dsdt" then + find-drop-in 0= abort" No DSDT " ( adr len ) 2dup dsdt-adr swap move free-mem
do-acpi-wake wake-adr /do-acpi-wake move
Added: cpu/x86/pc/olpc/via/dsdt-c2only.dsl ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/x86/pc/olpc/via/dsdt-c2only.dsl Thu May 19 08:11:17 2011 (r2202) @@ -0,0 +1,2597 @@ +// LICENSE_BEGIN +// Copyright (c) 2009 One Laptop per Child, Association, Inc. +// +// Permission is hereby granted, free of charge, to any person obtaining +// a copy of this software and associated documentation files (the +// "Software"), to deal in the Software without restriction, including +// without limitation the rights to use, copy, modify, merge, publish, +// distribute, sublicense, and/or sell copies of the Software, and to +// permit persons to whom the Software is furnished to do so, subject to +// the following conditions: +// +// The above copyright notice and this permission notice shall be +// included in all copies or substantial portions of the Software. +// +// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +// EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +// NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +// LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +// OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +// WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +// +// LICENSE_END + +DefinitionBlock ("dsdt-c2only.aml", // AML file name + "DSDT", // Table signature, DSDT + 0x01, // Compliance Revision + "OLPC", // OEM ID + "XO-1.5 ", // Table ID + 0x00000001) // OEM Revision +{ + +// This entity must be present very near the beginning of the DSDT +// so Windows OEM Activation will work. The OEMBIOS.INI file that +// was supplied to Microsoft stipulates that the sequence "OLPC XO" +// will appear within 60 bytes of the address 0xfc000, which is the +// DSDT start address. +Name (VERS, Package (0x02) { + "QUANTACOMPUTER XO-1.5", + "$Id$" +}) + +// OperationRegion (SMIR, SystemIO, 0x042f, 0x01) +// Field (SMIR, ByteAcc, NoLock, Preserve) +// { +// SMIE, 8 +// } +// Method (FRTH, 1, NotSerialized) +// { +// Store(Arg0, SMIE) +// // Type "resume" at the OK prompt to return +// } + +OperationRegion (UART, SystemIO, 0x03f8, 0x08) + +// set to 1 to enable debug output +Name (UDBG, 0) + +Field (UART, ByteAcc, NoLock, Preserve) +{ + UDAT, 8, + UAR1, 8, + UAR2, 8, + UAR3, 8, + UAR4, 8, + USTA, 8, + UAR5, 8 +} + +Method (UPUT, 1, NotSerialized) +{ + If (UDBG) { + While( LEqual (And (USTA, 0x20), Zero) ) { + Stall (99) + } + Store (Arg0, UDAT) + } +} + +Method (UDOT, 1, NotSerialized) +{ + If (UDBG) { + And (ShiftRight (Arg0, 4), 0xF, Local0) + If (LLess (Local0, 10)) { + Add (Local0, 0x30, Local0) // '0' + } Else { + Add (Local0, 0x57, Local0) // 'a' - 10 + } + UPUT (Local0) + + And (Arg0, 0xF, Local0) + If (LLess (Local0, 10)) { + Add (Local0, 0x30, Local0) // '0' + } Else { + Add (Local0, 0x57, Local0) // 'a' - 10 + } + UPUT (Local0) + + UPUT (0x20) + } +} + +OperationRegion(CMS1, SystemIO, 0x74, 0x2) +Field(CMS1, ByteAcc, NoLock, Preserve) { + CMSI, 8, + CMSD, 8 +} + +Method (CMSW, 2) +{ + Store (Arg0, CMSI) + Store (Arg1, CMSD) +} + +// Processor Objects +Scope(_PR) +{ + Processor(_PR.CPU0,0x00,0x00000410,0x06) + { + Name(_CST, Package() + { + 1, + Package(){ResourceTemplate(){Register(SystemIO, 8, 0, 0x414)}, 2, 2, 750}, + }) + } +} + +// System Sleep States +Name(_S0,Package(){0,0,0,0}) +// Name(_S1,Package(){4,4,4,4}) // Entering S1 sometimes prevents entry to S3 in Windows +Name(_S3,Package(){1,1,1,1}) +Name(_S4,Package(){2,2,2,2}) +Name(_S5,Package(){2,2,2,2}) + +OperationRegion(\DEBG, SystemIO, 0x80, 0x1) +Field(\DEBG, ByteAcc, NoLock, Preserve) { + DBG1, 8, +} + +// PMIO_RX04 +OperationRegion(\SCIE, SystemIO, 0x0404, 0x2) // Genernal Purpose SCI Enable +Field(\SCIE, ByteAcc, NoLock, Preserve) { + SCIZ, 1, // SCI / SMI enable +} + +OperationRegion(\GPST, SystemIO, 0x0420, 0x2) +Field(\GPST, ByteAcc, NoLock, Preserve) { + GS00,1, // GPI0 + GS01,1, // GPI1 (GPWAKE) + GS02,1, // internal KBC PME + GS03,1, // V1 Interrupt + GS04,1, // EXTSMI# + GS05,1, // PME# + GS06,1, // INTRUDER# + GS07,1, // GP3 timer timeout + GS08,1, // ring + GS09,1, // mouse controller PME + GS10,1, // thermal detect (ebook) + GS11,1, // LID# + GS12,1, // battery low + GS13,1, // HDAC wakeup + GS14,1, // USB wakeup + GS15,1, // north module SERR# +} + +OperationRegion(GPIO, SystemIO, 0x0448, 0x4) +Field(GPIO, ByteAcc, NoLock, Preserve) { + ,7, + GPI7,1, // lid + ,1, + GPI9,1, // ebook + ,22, +} + +// PMIO_RX22/3 +OperationRegion(\GPSE, SystemIO, 0x0422, 0x2) // Genernal Purpose SCI Enable +Field(\GPSE, ByteAcc, NoLock, Preserve) { + GPS0, 1, // GPI0 SCI Enable + GPWK, 1, // GPI1 SCI Enable + KBCE, 1, // PS2 KB PME Enable + , 1, + EXTE, 1, // EXTSMI# Enable + PME, 1, // PCI PME Enable + , 2, + RING, 1, // Ring Wakeup + , 1, + THRM, 1, // Ebook/Thermal detect + LID, 1, // Lid Wakeup + , 1, // BATLOW Enable + HDA, 1, // HDA Enable + USBE, 1, // USB Resume + , 1, // NB SERR Detect +} + +// PMIO_RX28/9 +OperationRegion(\Glos, SystemIO, 0x0428, 0x2) // Global Status +Field(\Glos, ByteAcc, NoLock, Preserve) { + , 6, // + SSMI, 1, // software SMI + PRII, 1, // primary IRQ + , 2, // + SLPE, 1, // sleep enable(Rx05) + SIRS, 1, // serirq status + , 4, +} + +OperationRegion(\WIRQ, SystemIO, 0x042a, 0x1) // IRQ Resume Reg +Field(\WIRQ, ByteAcc, NoLock, Preserve) { + IRQR, 8, +} + +// from BIOS porting guide, section 13.2.2 +OperationRegion(\EDGE, SystemIO, 0x042c, 1) // SMI enable, lid edge polarity +Field(\EDGE, ByteAcc, NoLock, Preserve) { + , 1, // SMI enable (1 == enable) + , 1, // + PPOL, 1, // power button polarity (1 == falling) + , 1, // + , 1, // + , 1, // battery low enable (0 == enable) + TPOL, 1, // therm polarity (1 == falling) + LPOL, 1, // lid polarity (1 == falling) +} + +OperationRegion(\Stus, SystemIO, 0x0430, 0x1) // Global Status +Field(\Stus, ByteAcc, NoLock, Preserve) { + PADS, 8, +} + +OperationRegion(\Prie, SystemIO, 0x0434, 0x1) +Field(\Prie, ByteAcc, NoLock, Preserve) { + , 5, + CMAE, 1, // COMA_EN + CMBE, 1, // COMB_EN +} + +// +// General Purpose Event +// +Scope(_GPE) +{ + Method(_L01) { + UPUT (0x31) // 1 + Notify(_SB.PCI0.EC, 0x80) // GPWAKE, from the EC + } + + Method(_L02) { + UPUT (0x33) // 3 + Notify(_SB.PCI0.VT86.PS2K, 0x02) //Internal Keyboard PME Status + } + + Method(_L04) { + UPUT (0x34) // 4 + Notify(_SB.SLPB, 0x80) + } + + Method(_L05) { + UPUT (0x35) // 5 + Notify(_SB.PCI0,0x2) + } + + Method(_L09) { + UPUT (0x39) // 9 + Notify(_SB.PCI0.VT86.PS2M, 0x02) //Internal Mouse Controller PME Status + } + + Method(_L0A) { // EBOOK event (THRM#) + UPUT (0x65) // e + Not(TPOL, TPOL) // Flip the therm polarity bit + Store (One, GS10) // clear interrupt caused by polarity flip + Notify(_SB.PCI0.EBK, 0x80) + } + + Method(_L0B) { // LID event + UPUT (0x66) // f + Store (GPI7, LPOL) // set edge detect from current lid state + Notify(_SB.PCI0.LID, 0x80) + } + + Method(_L0D) { + Notify(_SB.PCI0.HDAC, 0x02) + } + + Method(_L0E) { //USB Wake up Status + Notify(_SB.PCI0.USB1, 0x02) + Notify(_SB.PCI0.USB2, 0x02) + Notify(_SB.PCI0.USB3, 0x02) + Notify(_SB.PCI0.EHCI, 0x02) + } +} + +Name(PICF,0x00) // PIC or APIC? +Method(_PIC, 0x01, NotSerialized) { + Store (Arg0, PICF) +} + +// +// System Wake up +// +Method(_WAK, 1, Serialized) +{ +// FRTH(2) + Notify(_SB.PCI0.USB1, 0x00) + Notify(_SB.PCI0.USB2, 0x00) + Notify(_SB.PCI0.USB3, 0x00) + Notify(_SB.PCI0.EHCI, 0x00) + + Store(One, SCIZ) + + If (LEqual (Arg0, 1)) //S1 + { + Notify (_SB.SLPB, 0x02) + } + + Or (Arg0, 0xA0, Local0) + Store (Local0, DBG1) //80 Port: A1, A2, A3.... + + IF (LEqual(Arg0, 0x01)) //S1 + { + And(IRQR,0x7F,IRQR) //Disable IRQ Resume Reg, IRQR:Rx2A + While(PRII){ //PRII:Rx28[7] + Store (One, PRII) //Clear Primary IRQ resume Status + } + While(LNotEqual(PADS, 0x00)) //PADS: Rx30[1:7] + { + Store (PADS, PADS) //Clear Primary Activity Detect Status + } + } + + Notify(_SB.SLPB, 0x2) + + IF (LEqual(Arg0, 0x03)) //S3 + { + Store(0x2,_SB.PCI0.MEMC.FSEG) //Set F Segment to Read only + // Notify(_SB.PCI0, 0x00) + } + + Or (Arg0, 0xB0, Local0) + Store (Local0, DBG1) //80 Port: B1, B2, B3.... + + // always want to hear both lid events when awake + Store (GPI7, LPOL) // watch either edge + + // always want to hear ebook events (through THRM# GPIO) + Store (One, _SB.PCI0.VT86.ENTH) + + Return (0) +} + +// +// System sleep down +// +Method (_PTS, 1, NotSerialized) +{ + Or (Arg0, 0xF0, Local0) + Store (Local0, DBG1) //80 Port: F1, F2, F3.... + + // if (LIDX == 0), wake on rising edge only, else wake on either + Store (And(_SB.PCI0.LID.LIDX, GPI7), LPOL) + + IF (LEqual(Arg0, 0x01)) // S1 + { + While(PRII) + { + Store (One, PRII) // Clear Primary IRQ resume Status + } + While(LNotEqual(PADS, 0x00)) + { + Store (PADS, PADS) // Clear Primary Activity Detect Status + } + Or(IRQR,0x80,IRQR) // Enable IRQ Resume Reg + + } //End of Arg0 EQ 0x01 + + IF (LEqual(Arg0, 0x03)) { // S3 + Store(0x0,_SB.PCI0.MEMC.FSEG) // Disable F Segment Read/Write + } + + IF (LEqual(Arg0, 0x04)) { //S4 + } + + IF (LEqual(Arg0, 0x05)) { //S5 + Store (Zero, GS04) // Clear EXTSMI# Status, why? + } + Sleep(0x64) +// FRTH(One) + Return (0x00) +} + +// Method(STRC, 2) { // Compare two String +// If(LNotEqual(Sizeof(Arg0), Sizeof(Arg1))) { +// Return(1) +// } +// +// Add(Sizeof(Arg0), 1, Local0) +// +// Name(BUF0, Buffer(Local0) {}) +// Name(BUF1, Buffer(Local0) {}) +// +// Store(Arg0, BUF0) +// Store(Arg1, BUF1) +// +// While(Local0) { +// Decrement(Local0) +// If(LNotEqual(Derefof(Index(BUF0, Local0)), Derefof(Index(BUF1, Local0)))) { +// Return(1) +// } +// } +// Return(0) // Str1 & Str2 are match +// } + +// +// System Bus +// +Scope(_SB) +{ + + Method(_INI, 0) + { + Store(One, SCIZ) + } + + Device (SLPB) + { + Name (_HID, EISAID("PNP0C0E")) // Hardware Device ID SLEEPBTN + Name (_STA, 0) // not present on XO. note that there are still + // Notify() calls to SLPB -- not sure what that will do. + Name(_PRW, Package(2){0x04,5}) //Internal Keyboard Controller PME Status; S5 + } + + Device(PCI0) + { +// Our WindowsXP SD build doesn't handle PCIe, so we have to claim basic PCI +// Name(_HID,EISAID ("PNP0A08")) // Indicates PCI Express host bridge hierarchy +// Name(_CID,EISAID ("PNP0A03")) // For legacy OS that doesn't understand the new HID + Name(_HID,EISAID ("PNP0A03")) // For legacy OS that doesn't understand the new HID + + Name(_ADR,0x00000000) // Device (HI WORD)=0, Func (LO WORD)=0 + + Name (_BBN,0) + + Method(_INI, 0) + { + UPUT (0x4a) // J + } + + Name (_S3D, 3) + + Method(_STA, 0) { + Return(0x0F) // present, enabled, functioning + } + + Name(_PRW, Package(2){0x5,0x4}) // PME# + + Method(_CRS,0) { + Name(BUF0,ResourceTemplate() { + WORDBusNumber( // Bus 0 + ResourceConsumer, + MinNotFixed, + MaxNotFixed, + PosDecode, + 0x0000, + 0x0000, + 0x00FF, + 0x0000, + 0x0100 + ) + + IO( // IO Resource for PCI Bus + Decode16, + 0x0CF8, + 0x0CF8, + 1, + 8 + ) + + WORDIO( // IO from 0x0000 - 0x0cf7 + ResourceProducer, + MinFixed, + MaxFixed, + PosDecode, + EntireRange, + 0x0000, + 0x0000, + 0x0CF7, + 0x0000, + 0x0CF8 + ) + + WORDIO( // IO from 0x0d00 - 0xffff + ResourceProducer, + MinFixed, + MaxFixed, + PosDecode, + EntireRange, + 0x0000, + 0x0D00, + 0xFFFF, + 0x0000, + 0xF300 + ) + + DWORDMemory( + ResourceProducer, + PosDecode, + MinFixed, + MaxFixed, + Cacheable, + ReadWrite, + 0x00000000, + 0x000A0000, + 0x000BFFFF, + 0x00000000, + 0x00020000 + ) + + DWORDMemory( + ResourceProducer, + PosDecode, + MinFixed, + MaxFixed, + Cacheable, + ReadWrite, + 0x00000000, + 0x000C0000, + 0x000DFFFF, + 0x00000000, + 0x00020000 + ) + // XXX I don't know what this is + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, + 0xFED40000, + 0xFED44FFF, + 0x00000000, + 0x00005000, + ) + DWORDMemory( // Consumed-and-produced resource(all of memory space) + ResourceProducer, // bit 0 of general flags is 0 + PosDecode, // positive Decode + MinFixed, // Range is fixed + MaxFixed, // Range is fixed + Cacheable, + ReadWrite, + 0x00000000, // Granularity + 0x80000000, // Min (calculated dynamically) + 0xBfffffff, // Max = 4GB - 1MB (fwh + fwh alias...) + 0x00000000, // Translation + 0x40000000, // Range Length (calculated dynamically) + , // Optional field left blank + , // Optional field left blank + MEM3 // Name declaration for this descriptor + ) + }) // end of BUF0 + + CreateDWordField(BUF0,MEM3._MIN, PMRN) + CreateDWordField(BUF0,MEM3._MAX, PMRM) + CreateDWordField(BUF0,MEM3._LEN, PMRL) + // XXX top of PCI memory space + Store(0xFFE80000, PMRM) + Store(_SB.PCI0.MEMC.LTMA, Local0) + ShiftLeft(Local0, 16, PMRN) + Subtract (PMRM, PMRN, PMRL) + + Return(BUF0) + } // end of CRS + + Device(MEMC) { + Name(_ADR, 0x00000003) + + Method(_STA, 0) { + Return(0x0F) // present, enabled, functioning + } + + OperationRegion(MCPS,PCI_Config,0x00,0x100) + Field(MCPS,ByteAcc,NoLock,Preserve) + { + Offset(0x83), + , 4, + FSEG, 2, //Rx83[4:5] + , 2, + + Offset(0x84), + LTMA, 16, //Rx84 and Rx85. Low Top Address of Memory + + Offset(0x86), + , 2, + ENTS, 1, //Enable Top SMRAM Size + , 3, + TSMS, 2, // Top SMRAM Size + + Offset(0xA1), + , 4, + FBSZ, 3, // Frame Buffer Size + ENIG, 1, // Enable Internal Graphic + } + } + + // USBD Controller + Device (USBD) + { + Name(_ADR, 0x000B0000) + + OperationRegion(RUDC,PCI_Config,0x00,0x100) + Field(RUDC,ByteAcc,NoLock,Preserve){ + Offset(0x00), + VID, 16, + Offset(0x04), + CMDR, 3, + } + + Method(_STA, 0) + { + If(LNotEqual(_SB.PCI0.USBD.VID, 0x1106)) { + Return(0x00) + } Else { + If(LEqual(_SB.PCI0.USBD.CMDR, 0x00)) { + Return(0x0D) + } Else { + Return(0x0F) // present, enabled, functioning + } + } + } + }//Device(USBD) + +// // SDIO Controller +// Device (SDIO) +// { +// Name(_ADR, 0x000C0000) +// +// OperationRegion(RSDC,PCI_Config,0x00,0x100) +// Field(RSDC,ByteAcc,NoLock,Preserve){ +// Offset(0x00), +// VID, 16, +// Offset(0x04), +// CMDR, 3, +// } +// +// Method(_STA, 0) +// { +// If(LNotEqual(_SB.PCI0.SDIO.VID, 0x1106)) { +// Return(0x00) +// } Else { +// If(LEqual(_SB.PCI0.SDIO.CMDR, 0x00)) { +// Return(0x0D) +// } Else { +// Return(0x0F) // present, enabled, functioning +// } +// } +// } +// }//Device(SDIO) + +// // SD $ MS Controller +// Device (SDMS) +// { +// Name(_ADR, 0x000D0000) +// +// OperationRegion(RSDM,PCI_Config,0x00,0x100) +// Field(RSDM,ByteAcc,NoLock,Preserve){ +// Offset(0x00), +// VID, 16, +// Offset(0x04), +// CMDR, 3, +// } +// +// Method(_STA, 0) +// { +// If(LNotEqual(_SB.PCI0.SDMS.VID, 0x1106)) { +// Return(0x00) +// } Else { +// If(LEqual(_SB.PCI0.SDMS.CMDR, 0x00)) { +// Return(0x0D) +// } Else { +// Return(0x0F) // present, enabled, functioning +// } +// } +// } +// }//Device(SDMS) +// +// // CE-ATA $ NF Controller(Card Boot) +// Device(CENF) +// { +// Name(_ADR, 0x000E0000) +// +// OperationRegion(RENF,PCI_Config,0x00,0x100) +// Field(RENF,ByteAcc,NoLock,Preserve){ +// Offset(0x00), +// VID, 16, +// Offset(0x04), +// CMDR, 3, +// } +// +// Method(_STA, 0) +// { +// If(LNotEqual(_SB.PCI0.CENF.VID, 0x1106)) { +// Return(0x00) +// } Else { +// If(LEqual(_SB.PCI0.CENF.CMDR, 0x00)) { +// Return(0x0D) +// } Else { +// Return(0x0F) // present, enabled, functioning +// } +// } +// } +// } +// +// Device(IDEC) +// { +// +// Name(_ADR, 0x000F0000) //D15F0: a Pata device +// +// Method(_STA,0,NotSerialized) //Status of the Pata Device +// { +// If(LNot(LEqual(_SB.PCI0.IDEC.VID,0x1106))) +// { +// Return(0x00) //device not exists +// } +// Else +// { +// If(LEqual(_SB.PCI0.IDEC.CMDR,0x00)) +// { +// Return(0x0D) //device exists & disable +// } +// Else +// { +// Return(0x0F) //device exists & enable +// } +// } +// } +// OperationRegion(SAPR,PCI_Config,0x00,0xC2) +// Field(SAPR,ByteAcc,NoLock,Preserve) +// { +// VID,16, +// Offset(0x04), +// CMDR,3, +// Offset(0x40), +// , 1, +// EPCH, 1, // Enable Primary channel. +// Offset(0x4A), +// PSPT, 8, // IDE Timings, Primary Slave +// PMPT, 8, // IDE Timings, Primary Master +// Offset(0x52), +// PSUT, 4, // Primary Slave UDMA Timing +// PSCT, 1, // Primary Drive Slave Cabal Type +// PSUE, 3, // Primary Slave UDMA Enable +// PMUT, 4, // Primary Master UDMA Timing +// PMCT, 1, // Primary Drive Master Cabal Type +// PMUE, 3, // Primary Master UDMA Enable +// } +// +// Name(REGF,0x01) //accessible OpRegion default +// Method(_REG,2,NotSerialized) // is PCI Config space accessible as OpRegion? +// { +// If(LEqual(Arg0,0x02)) +// { +// Store(Arg1,REGF) +// } +// } +// /* +// Name(TIM0,Package(0x04){ +// Package(){0x78,0xB4,0xF0,0x017F,0x0258}, +// Package(){0x20,0x22,0x33,0x47,0x5D}, +// Package(){0x78,0x50,0x3C,0x2D,0x1E,0x14,0x0F}, +// Package(){0x06,0x05,0x04,0x04,0x03,0x03,0x02,0x02,0x01,0x01,0x01,0x01,0x01,0x01,0x00} +// }) +// */ +// Name(TIM0, Package() +// { // Primary / Secondary channels timings +// Package(){120, 180, 240, 383, 600}, // Timings in ns - Mode 4,3,2,1,0 defined from ATA spec. +// Package(){0x20, 0x22, 0x33, 0x47, 0x5D }, // PIO Timing - Mode 4,3,2,1,0 +// Package(){4, 3, 2, 1, 0}, // PIO mode (TIM0,0) +// Package(){2, 1, 0, 0}, // Multi-word DMA mode +// Package(){120, 80, 60, 45, 30, 20, 15}, // Min UDMA Timings in ns +// Package(){6,5,4,4,3,3,2,2,1,1,1,1,1,1,0}, // UDMA mode +// Package(){0x0E, 8, 6, 4, 2, 1, 0}, // UDMA timing +// }) +// +// Name(TMD0,Buffer(0x14){}) +// CreateDwordField(TMD0,0x00,PIO0) +// CreateDwordField(TMD0,0x04,DMA0) +// CreateDwordField(TMD0,0x08,PIO1) +// CreateDwordField(TMD0,0x0C,DMA1) +// CreateDwordField(TMD0,0x10,CHNF) +// +// Name(GMPT, 0) // Master PIO Timings +// Name(GMUE, 0) // Master UDMA enable +// Name(GMUT, 0) // Master UDMA Timings +// Name(GSPT, 0) // Slave PIO Timings +// Name(GSUE, 0) // Slave UDMA enable +// Name(GSUT, 0) // Slave UDMA Timings +// +// Device(CHN0) //Primary Channel: Pata device +// { +// Name(_ADR,0x00) +// +// Method(_STA,0,NotSerialized) +// { +// If(LNotEqual(_SB.PCI0.IDEC.EPCH, 0x1)) +// { +// Return(0x00) //channel disable +// } +// Else +// { +// Return(0x0F) //channel enable +// } +// } +// Method(_GTM,0,NotSerialized) //Get Timing Mode +// { +// Return(GTM(PMPT,PMUE,PMUT,PSPT,PSUE,PSUT)) +// } +// Method(_STM, 3) // Set Timing PIO/DMA Mode +// { +// Store(Arg0, TMD0) // Copy Arg0 into TMD0 buffer +// Store(PMPT, GMPT) // Master PIO Timings +// Store(PMUE, GMUE) // Master UDMA enable +// Store(PMUT, GMUT) // Master UDMA Timings +// Store(PSPT, GSPT) // Slave PIO Timings +// Store(PSUE, GSUE) // Slave UDMA enable +// Store(PSUT, GSUT) // Slave UDMA Timings +// STM() +// Store(GMPT, PMPT) // Master PIO Timings +// Store(GMUE, PMUE) // Master UDMA enable +// Store(GMUT, PMUT) // Master UDMA Timings +// Store(GSPT, PSPT) // Slave PIO Timings +// Store(GSUE, PSUE) // Slave UDMA enable +// Store(GSUT, PSUT) // Slave UDMA Timings +// } // end Method _STM +// +// Device(DRV0) //Master Device +// { +// Name(_ADR,0x00) //0 indicates master drive +// Method(_GTF,0,NotSerialized) //Get Task File: return a buffer of ATA command used to re-initialize //////the device +// { +// Return(GTF(0,PMUE,PMUT,PMPT)) +// } +// } +// Device(DRV1) //Slave Device +// { +// Name(_ADR,0x01) //1 indicates slave drive +// Method(_GTF,0,NotSerialized) //Get Task File: return a buffer of ATA command used to re-initialize //the device +// { +// Return(GTF(0,PSUE,PSUT,PSPT)) +// } +// } +// } +// +// Method(GTM,6,Serialized) +// { +// Store(Ones,PIO0) //default value: all bits set to 1 +// Store(Ones,PIO1) //default value: all bits set to 1 +// Store(Ones,DMA0) //default value: all bits set to 1 +// Store(Ones,DMA1) //default value: all bits set to 1 +// Store(0x10,CHNF) //default value: 0x10 +// If(REGF) +// { +// } +// Else +// { +// Return(TMD0) //unable to setup PCI config space as opRegion;return default value +// } +// Store(Match(DeRefOf(Index(TIM0,0x01)),MEQ,Arg0,MTR,0x00,0x00),Local6) +// If(LLess(Local6,Ones)) +// { +// Store(DeRefOf(Index(DeRefOf(Index(TIM0,0x00)),Local6)),Local7) +// Store(Local7,DMA0) +// Store(Local7,PIO0) +// } +// Store(Match(DeRefOf(Index(TIM0,0x01)),MEQ,Arg3,MTR,0x00,0x00),Local6) +// If(LLess(Local6,Ones)) +// { +// Store(DeRefOf(Index(DeRefOf(Index(TIM0,0x00)),Local6)),Local7) +// Store(Local7,DMA1) +// Store(Local7,PIO1) +// } +// If(Arg1) +// { +// Store(DeRefOf(Index(DeRefOf(Index(TIM0,0x05)),Arg2)),Local5) +// Store(DeRefOf(Index(DeRefOf(Index(TIM0,0x04)),Local5)),DMA0) +// Or(CHNF,0x01,CHNF) +// } +// If(Arg4) +// { +// Store(DeRefOf(Index(DeRefOf(Index(TIM0,0x05)),Arg5)),Local5) +// Store(DeRefOf(Index(DeRefOf(Index(TIM0,0x04)),Local5)),DMA1) +// Or(CHNF,0x04,CHNF) +// } +// Return(TMD0) //return timing mode +// } +// +// Method(STM, 0, Serialized) +// { +// +// If(REGF){} // PCI space not accessible +// Else { Return(TMD0) } +// +// Store(0x00, GMUE) // Master UDMA Disable +// Store(0x00, GSUE) // Slave UDMA Disable +// Store(0x07, GMUT) // Master UDMA Mode 0 +// Store(0x07, GSUT) // Slave UDMA Mode 0 +// +// If(And(CHNF, 0x1)) +// { +// Store(Match(DeRefOf(Index(TIM0, 4)), MLE, DMA0, MTR,0,0), Local0) // Get DMA mode +// Store(DeRefOf(Index(DeReFof(Index(TIM0, 6)), Local0)), GMUT) // Timing bit mask 66Mhz +// Or(GMUE, 0x07, GMUE) // Enable UltraDMA for Device 0 +// } +// Else // non - UDMA mode. Possible Multi word DMA +// { +// If(Or(LEqual(PIO0,Ones), LEqual(PIO0,0))) +// { +// If(And(LLess(DMA0,Ones), LGreater(DMA0,0))) +// { +// Store(DMA0, PIO0) // Make PIO0=DMA0 +// } +// } +// } +// +// If(And(CHNF, 0x4)) +// { +// Store(Match(DeRefOf(Index(TIM0, 4)), MLE, DMA1, MTR,0,0), Local0) +// Store(DeRefOf(Index(DeReFof(Index(TIM0, 6)), Local0)), GSUT) // Timing bit mask 66Mhz +// Or(GSUE, 0x07, GSUE) // Enable UltraDMA for Device 0 +// } +// Else // non - UDMA mode. Possible Multi word DMA +// { +// If(Or(LEqual(PIO1, Ones), LEqual(PIO1,0))) +// { +// If(And(LLess(DMA1, Ones), LGreater(DMA1,0))) +// { +// Store(DMA1, PIO1) // Make PIO1 = DMA1 +// } +// } +// } +// +// And(Match(DeRefOf(Index(TIM0, 0)), MGE, PIO0, MTR,0,0), 0x3, Local0) +// Store(DeRefOf(Index(DeReFof(Index(TIM0, 1)), Local0)), Local1) +// Store(Local1, GMPT) +// +// And(Match(DeRefOf(Index(TIM0, 0)), MGE, PIO1, MTR,0,0), 0x3, Local0) +// Store(DeRefOf(Index(DeReFof(Index(TIM0, 1)), Local0)), Local1) +// Store(Local1, GSPT) +// Return(TMD0) +// } // end Method STM +// +// Method(GTF , 4 , Serialized) +// { +// Store(Buffer(7){0x03, 0x00, 0x00, 0x00, 0x00, 0xA0, 0xEF}, Local1) +// Store(Buffer(7){0x03, 0x00, 0x00, 0x00, 0x00, 0xA0, 0xEF}, Local2) +// CreateByteField(Local1, 1, Mode) // PIO mode +// CreateByteField(Local2, 1, UMOD) // Ultra mode +// CreateByteField(Local1, 5, PCHA) // master or slave +// CreateByteField(Local2, 5, UCHA) // master or slave +// And(Arg0,0x03,Local3) +// +// If(Lequal(And(Local3,0x01),0x01)) +// { +// Store(0xB0,PCHA) // drive 1 +// Store(0xB0,UCHA) // drive 1 +// } +// +// If(Arg1) +// { +// Store(DeRefOf(Index(DeReFof(Index(TIM0, 5)), Arg2)), UMOD) //Programming DMA Mode +// Or( UMOD, 0x40, UMOD) +// } +// Else +// { // non-UltraDMA +// Store(Match(DeRefOf(Index(TIM0, 1)), MEQ, Arg3, MTR,0,0), Local0) +// Or(0x20, DeRefOf(Index(DeReFof(Index(TIM0, 3)), Local0)), UMOD) +// } +// +// Store(Match(DeRefOf(Index(TIM0, 1)), MEQ, Arg3, MTR,0,0), Local0) +// Or(0x08, DeRefOf(Index(DeReFof(Index(TIM0, 2)), Local0)), Mode) +// Concatenate(Local1, Local2, Local6) +// Return(Local6) +// +// } // end of GTF +// } + + Device(USB1) { + Name(_ADR,0x00100000) //Address+function. + + Name(_PRW, Package(2){0x0E,3}) + + Name(_S3D, 3) + + OperationRegion(U2F0,PCI_Config,0x00,0xC2) + Field(U2F0,ByteAcc,NoLock,Preserve){ + Offset(0x00), + VID, 16, + Offset(0x04), + CMDR, 3, + Offset(0x3c), + U3IR, 4, //USB1 Interrupt Line + Offset(0x84), + ECDX, 2 //USB1 PM capability status register + } + + Method(_STA,0) { //Status of the USB1 Device + If(LEqual(_SB.PCI0.USB1.CMDR, 0x00)) { + Return(0x0D) + } Else { + Return(0x0F) + } + } + } + + Device(USB2) { + Name(_ADR,0x00100001) //Address+function. + + Name(_PRW, Package(2){0x0E,3}) + + Name(_S3D, 3) + + OperationRegion(U2F1,PCI_Config,0x00,0xC2) + Field(U2F1,ByteAcc,NoLock,Preserve){ + Offset(0x00), + VID, 16, + Offset(0x04), + CMDR, 3, + Offset(0x3c), + U4IR, 4, //USB2 Interrupt Line + Offset(0x84), + ECDX, 2 //USB2 PM capability status register + } + + Method(_STA,0) { //Status of the USB2 Device + If(LEqual(_SB.PCI0.USB2.CMDR, 0x00)) { + Return(0x0D) + } Else { + Return(0x0F) + } + } + } + + Device(USB3) { + Name(_ADR,0x00100002) //Address+function. + + Name(_PRW, Package(2){0x0E,3}) + + Name(_S3D, 3) + + OperationRegion(U2F2,PCI_Config,0x00,0xC2) + Field(U2F2,ByteAcc,NoLock,Preserve){ + Offset(0x00), + VID, 16, + Offset(0x04), + CMDR, 3, + Offset(0x3c), + U5IR, 4, //USB3 Interrupt Line + Offset(0x84), + ECDX, 2 //USB3 PM capability status register + } + + Method(_STA,0) { //Status of the USB3 Device + If(LEqual(_SB.PCI0.USB3.CMDR, 0x00)) { + Return(0x0D) + } Else { + Return(0x0F) + } + } + } + + Device(EHCI) { + Name(_ADR,0x00100004) //Address+function. + + Name(_PRW, Package(2){0x0E,3}) + + Name(_S3D, 3) + + OperationRegion(U2F4,PCI_Config,0x00,0xC2) + Field(U2F4,ByteAcc,NoLock,Preserve){ + Offset(0x00), + VID, 16, + Offset(0x04), + CMDR, 3, + Offset(0x3c), + U7IR, 4, //EHCI1 Interrupt Line + Offset(0x84), + ECDX, 2 //EHCI1 PM capability status register + } + + Method(_STA,0) { //Status of the EHCI1 Device + If(LEqual(_SB.PCI0.EHCI.CMDR, 0x00)) { + Return(0x0D) + } Else { + Return(0x0F) + } + } + } + + Device (PEXX) + { + Name (_HID, EISAID ("PNP0C01")) + Name (_STA, 0x0F) + Name (_CRS, + ResourceTemplate() + { + Memory32Fixed (ReadWrite, 0xE0000000, 0x10000000) + } + ) + } + + Device(VT86) + { + Name(_ADR,0x00110000) //Address+function. + + OperationRegion(VTSB, PCI_Config, 0x00, 0x100) + Field(_SB.PCI0.VT86.VTSB,ByteAcc,NoLock,Preserve) { + Offset(0x2), + DEID, 16, // Device ID + + Offset(0x2C), + ID2C,8, // RX2C + ID2D,8, // RX2D + ID2E,8, // RX2E + ID2F,8, // RX2F + + Offset(0x44), + PIRE, 4, + PIRF, 4, + PIRG, 4, + PIRH, 4, // PIRQH# Routing + + Offset(0x46), + POLE, 1, // INTE polarity + POLF, 1, // INTF polarity + POLG, 1, // INTG polarity + POLH, 1, // INTH polarity + ENR8, 1, // enable INTE~H routing by Rx44~Rx45. + , 1, + ECOM, 1, + + Offset(0x4E), + , 3, + EP74, 1, // Enable 74/75 Access CMOS + , 4, + + Offset(0x50), + , 1, + ESB3, 1, // RX5001 EHCI1 + ESB2, 1, // RX5002 USB3 + EIDE, 1, // RX5003 EIDE + EUSB, 1, // RX5004 USB1 + ESB1, 1, // RX5005 USB2 + USBD, 1, // RX5006 USB Device Mode controller + + Offset(0x51), + EKBC, 1, // RX5100 Internal Keyboard controller + KBCC, 1, // RX5101 Internal KBC Configuration + EPS2, 1, // RX5102 Internal PS2 Mouse + ERTC, 1, // RX5103 Internal RTC + SDIO, 1, // RX5104 enable SDIO controller + , 2, + + Offset(0x55), + , 4, + PIRA, 4, // PCI IRQA + PIRB, 4, // PCI IRQB + PIRC, 4, // PCI IRQC + , 4, + PIRD, 4, // PCI IRQD + + Offset(0x58), + , 6, + ESIA, 1, // Enable Source Bridge IO APIC + , 1, + + Offset(0x81), // Enable ACPI I/O + , 7, + ENIO, 1, + + Offset(0x88), + , 7, + IOBA, 9, // Power Management I/O Base + + Offset(0x8c), // Host Power Management Control + , 3, + ENTH, 1, // THRM# enable + + Offset(0x94), + , 5, + PLLD, 1, // RX9405 Internal PLL Reset During Suspend 0:Enable,1:Disable + + Offset(0xB0), + , 4, + EU1E, 1, // Embedded COM1 + EU2E, 1, // Embedded COM2 + , 2, + + Offset(0xB2), + UIQ1, 4, // UART1 IRQ + UIQ2, 4, // UART2 IRQ + + Offset(0xB4), + U1BA, 7, // UART1 I/O base address. + , 1, + U2BA, 7, // UART2 I/O base address. + , 1, + + Offset(0xB7), + , 3, + UDFE, 1, // UART DMA Funtion Enable + + Offset(0xB8), + , 2, + DIBA, 14, // UART DMA I/O Base Address + + Offset(0xBC), + SPIB, 24, + + Offset(0xD0), + , 4, + SMBA, 12, // SMBus I/O Base (16-byte I/O space) + + Offset(0xD2), + ENSM, 1, // Enable SMBus IO + , 7, + + Offset(0xF6), + REBD, 8, //Internal Revision ID + } + + Device(APCM) // APIC MMIO + { + Name(_HID, EISAID("PNP0C02")) // Hardware Device ID, Motherboard Resources + Name(_UID, 0x1100) + + Name(_CRS, ResourceTemplate() + { + Memory32Fixed(ReadWrite, 0xFEE00000, 0x00001000) // Local APIC + Memory32Fixed(ReadWrite, 0xFEC00000, 0x00001000) // IO APIC + }) + } + + Device(PS2M) //PS2 Mouse + { + Name(_HID,EISAID("PNP0F13")) + Name(_STA, 0xF) // not present: not used on XO + Name(_CRS, ResourceTemplate () { IRQNoFlags () {12} }) + Name(_PRW, Package() {0x09, 0x04}) + } + + Device(PS2K) // PS2 Keyboard + { + Name(_HID,EISAID("PNP0303")) + Name(_CID,EISAID("PNP030B")) // Microsoft reserved PNP ID + + Name(_STA,0xF) // not present: not used on XO + + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01, ) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01, ) + IRQNoFlags () {1} + }) + Name(_PRW, Package() {0x02, 0x04}) + } + + Device(DMAC) + { + Name(_HID, EISAID("PNP0200")) + + Name(_CRS,ResourceTemplate() { + IO(Decode16, 0x00, 0x00, 0, 0x10) // Master DMA Controller + IO(Decode16, 0x81, 0x81, 0, 0x03) // DMA Page Registers + IO(Decode16, 0x87, 0x87, 0, 0x01) + IO(Decode16, 0x89, 0x89, 0, 0x03) + IO(Decode16, 0x8F, 0x8F, 0, 0x01) + IO(Decode16, 0xC0, 0xC0, 0, 0x20) // Slave DMA Controller + DMA(Compatibility,NotBusMaster,Transfer8) {4} // Cascade channel + }) + } + + Device(RTC) + { + Name(_HID,EISAID("PNP0B00")) + + Name(_CRS,ResourceTemplate() + { + IO(Decode16, 0x70, 0x70, 0x00, 0x02) + IO(Decode16, 0x74, 0x74, 0x00, 0x02) + IRQNoFlags() {8} + }) + } + + Device(PIC) + { + Name(_HID,EISAID("PNP0000")) + Name(_CRS,ResourceTemplate() { + IO(Decode16,0x20,0x20,0x00,0x02) + IO(Decode16,0xA0,0xA0,0x00,0x02) + }) + } + + Device(FPU) + { + Name(_HID,EISAID("PNP0C04")) + Name(_CRS,ResourceTemplate() { + IO(Decode16,0xF0,0xF0,0x00,0x1) + IRQNoFlags(){13} + }) + } + + Device(TMR) + { + Name(_HID,EISAID("PNP0100")) + + Name(_CRS, ResourceTemplate() + { + IO(Decode16,0x40,0x40,0x00,0x04) + IRQNoFlags() {0} + }) + } + + Device(SPKR) // System Speaker + { + Name(_HID,EISAID("PNP0800")) + Name(_CRS,ResourceTemplate() { + IO(Decode16,0x61,0x61,0x01,0x01) + }) + } + + Name (ICRS, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) // The flags is the value of Byte 3 of IRQ Description Definition + { } // The value decides the value of Byte 1 and byte 2 of IRQ Description Definition + }) + + Name(PRSA, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + {3, 4, 5, 6, 7, 10, 11, 12, 14, 15} + }) + + Device(LNKA) { + Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link + Name(_UID, 1) + Method(_STA, 0) + { + If(LEqual(_SB.PCI0.VT86.PIRA, 0x00)) + { + Return(0x09) // disabled + } Else { + Return(0x0B) // enabled, but no UI + } + } + + Method(_PRS) + { + Return(PRSA) + } + + Method(_DIS) + { + Store(0x0, _SB.PCI0.VT86.PIRA) + } + + Method(_CRS) + { + CreateWordField (ICRS, 1, IRA0) + Store (1, Local1) + ShiftLeft (Local1, _SB.PCI0.VT86.PIRA, IRA0) + Return (ICRS) + } + + Method(_SRS, 1) { + CreateWordField (Arg0, 1, IRA) // Byte 1 and Byte 2 in the IRQ Descriptor Definition + FindSetRightBit (IRA, Local0) + Decrement (Local0) + Store (Local0, _SB.PCI0.VT86.PIRA) + } + } + + Device(LNKB) { + Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link + Name(_UID, 2) + Method(_STA, 0) + { + If(LEqual(_SB.PCI0.VT86.PIRB, 0x00)) + { + Return(0x09) // disabled + } Else { + Return(0x0B) // enabled, but no UI + } + } + + Method(_PRS) + { + Return(PRSA) + } + + Method(_DIS) + { + Store(0x0, _SB.PCI0.VT86.PIRB) + } + + Method(_CRS) + { + CreateWordField (ICRS, 1, IRA0) + Store (1, Local1) + ShiftLeft (Local1, _SB.PCI0.VT86.PIRB, IRA0) + Return (ICRS) + } + + Method(_SRS, 1) { + CreateWordField (Arg0, 1, IRA) // Byte 1 and Byte 2 in the IRQ Descriptor Definition + FindSetRightBit (IRA, Local0) + Decrement (Local0) + Store (Local0, _SB.PCI0.VT86.PIRB) + } + } + + + Device(LNKC) { + Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link + Name(_UID, 3) + Method(_STA, 0) + { + If(LEqual(_SB.PCI0.VT86.PIRC, 0x00)) + { + Return(0x09) // disabled + } Else { + Return(0x0B) // enabled, but no UI + } + } + + Method(_PRS) + { + Return(PRSA) + } + + Method(_DIS) + { + Store(0x0, _SB.PCI0.VT86.PIRC) + } + + Method(_CRS) + { + CreateWordField (ICRS, 1, IRA0) + Store (1, Local1) + ShiftLeft (Local1, _SB.PCI0.VT86.PIRC, IRA0) + Return (ICRS) + } + + Method(_SRS, 1) { + CreateWordField (Arg0, 1, IRA) //Byte 1 and Byte 2 in the IRQ Descriptor Definition + FindSetRightBit (IRA, Local0) + Decrement (Local0) + Store (Local0, _SB.PCI0.VT86.PIRC) + } + } + + Device(LNKD) { + Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link + Name(_UID, 4) + Method(_STA, 0) + { + If(LEqual(_SB.PCI0.VT86.PIRD, 0x00)) + { + Return(0x09) // disabled + } Else { + Return(0x0B) // enabled, but no UI + } + } + + Method(_PRS) + { + Return(PRSA) + } + + Method(_DIS) + { + Store(0x0, _SB.PCI0.VT86.PIRD) + } + + Method(_CRS) + { + CreateWordField (ICRS, 1, IRA0) + Store (1, Local1) + ShiftLeft (Local1, _SB.PCI0.VT86.PIRD, IRA0) + Return (ICRS) + } + + Method(_SRS, 1) { + CreateWordField (Arg0, 1, IRA) //Byte 1 and Byte 2 in the IRQ Descriptor Definition + FindSetRightBit (IRA, Local0) + Decrement (Local0) + Store (Local0, _SB.PCI0.VT86.PIRD) + } + } + + Device(LNKE) { + Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link + Name(_UID, 5) + Method(_STA, 0) + { + If(LEqual(_SB.PCI0.VT86.PIRE, 0x00)) + { + Return(0x09) // disabled + } Else { + Return(0x0B) // enabled, but no UI + } + } + + Method(_PRS) + { + Return(PRSA) + } + + Method(_DIS) + { + Store(0x0, _SB.PCI0.VT86.PIRE) + } + + Method(_CRS) + { + CreateWordField (ICRS, 1, IRA0) + Store (1, Local1) + ShiftLeft (Local1, _SB.PCI0.VT86.PIRE, IRA0) + Return (ICRS) + } + + Method(_SRS, 1) { + CreateWordField (Arg0, 1, IRA) //Byte 1 and Byte 2 in the IRQ Descriptor Definition + FindSetRightBit (IRA, Local0) + Decrement (Local0) + Store (Local0, _SB.PCI0.VT86.PIRE) + Store(One,ENR8) + Store(Zero,POLE) + } + } + + Device(LNKF) { + Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link + Name(_UID, 6) + Method(_STA, 0) + { + If(LEqual(_SB.PCI0.VT86.PIRF, 0x00)) + { + Return(0x09) // disabled + } Else { + Return(0x0B) // enabled, but no UI + } + } + + Method(_PRS) + { + Return(PRSA) + } + + Method(_DIS) + { + Store(0x0, _SB.PCI0.VT86.PIRF) + } + + Method(_CRS) + { + CreateWordField (ICRS, 1, IRA0) + Store (1, Local1) + ShiftLeft (Local1, _SB.PCI0.VT86.PIRF, IRA0) + Return (ICRS) + } + + Method(_SRS, 1) { + CreateWordField (Arg0, 1, IRA) //Byte 1 and Byte 2 in the IRQ Descriptor Definition + FindSetRightBit (IRA, Local0) + Decrement (Local0) + Store (Local0, _SB.PCI0.VT86.PIRF) + Store(One,ENR8) + Store(Zero,POLF) + } + } + + Device(LNK0) { + Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link + Name(_UID, 7) + Method(_STA, 0) + { + If(LEqual(_SB.PCI0.VT86.PIRG, 0x00)) + { + Return(0x09) // disabled + } Else { + Return(0x0B) // enabled, but no UI + } + } + + Method(_PRS) + { + Return(PRSA) + } + + Method(_DIS) + { + Store(0x0, _SB.PCI0.VT86.PIRG) + } + + Method(_CRS) + { + CreateWordField (ICRS, 1, IRA0) + Store (1, Local1) + ShiftLeft (Local1, _SB.PCI0.VT86.PIRG, IRA0) + Return (ICRS) + } + + Method(_SRS, 1) { + CreateWordField (Arg0, 1, IRA) //Byte 1 and Byte 2 in the IRQ Descriptor Definition + FindSetRightBit (IRA, Local0) + Decrement (Local0) + Store (Local0, _SB.PCI0.VT86.PIRG) + Store(One,ENR8) + Store(Zero,POLG) + } + } + + Device(LNK1) { + Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link + Name(_UID, 8) + Method(_STA, 0) + { + If(LEqual(_SB.PCI0.VT86.PIRH, 0x00)) + { + Return(0x09) // disabled + } Else { + Return(0x0B) // enabled, but no UI + } + } + + Method(_PRS) + { + Return(PRSA) + } + + Method(_DIS) + { + Store(0x0, _SB.PCI0.VT86.PIRH) + } + + Method(_CRS) + { + CreateWordField (ICRS, 1, IRA0) + Store (1, Local1) + ShiftLeft (Local1, _SB.PCI0.VT86.PIRH, IRA0) + Return (ICRS) + } + + Method(_SRS, 1) { + CreateWordField (Arg0, 1, IRA) //Byte 1 and Byte 2 in the IRQ Descriptor Definition + FindSetRightBit (IRA, Local0) + Decrement (Local0) + Store (Local0, _SB.PCI0.VT86.PIRH) + Store(One,ENR8) + Store(Zero,POLH) + } + } + + Mutex (MUEC, 0x00) + OperationRegion (ECCP, SystemIO, 0x068, 0x05) + + // NB -- the EC routines all return 0 for failure + + Field (ECCP, ByteAcc, NoLock, Preserve) + { + ECDA, 8, // 0x68 + , 8, + , 8, + , 8, + ECCM, 8, // 0x6c + } + + // force clear OBF by reading/discarding 0x68 + Method (OBFZ, 0, Serialized) + { + Store (100, Local0) + While (LAnd (Decrement (Local0), And (ECCM, 1))) + { + Store (ECDA, Local1) + Sleep(1) + } + Return (LNotEqual (Local0, Zero)) + } + + // wait for IBF == 0 + Method (IBFZ, 0, Serialized) + { + Store (100, Local0) + While (LAnd (Decrement (Local0), And (ECCM, 2))) + { + Sleep(1) + } + Return (LNotEqual (Local0, Zero)) + } + + // wait for IBF == 1 + Method (IBFN, 0, Serialized) + { + Store (100, Local0) + While (LAnd (Decrement (Local0), LNot (And (ECCM, 2)))) + { + Sleep(1) + } + Return (LNotEqual (Local0, Zero)) + } + + // wait for OBF == 1 + Method (OBFN, 0, Serialized) + { + Store (100, Local0) + While (LAnd (Decrement (Local0), LNot (And (ECCM, 1)))) + { + // UPUT (0x38) + // UDOT (ECCM) + Sleep(1) + } + Return (LNotEqual (Local0, Zero)) + } + + // EC read byte helper + Method (ECRB, 0, NotSerialized) + { + if (OBFN ()) { Return(ECDA) } + Return (Ones) + } + + // EC command helper + Method (ECWC, 1, NotSerialized) + { + UPUT (0x21) // ! + UDOT (Arg0) + if (OBFZ ()) { + // UPUT (0x35) + if (IBFZ ()) { + // UPUT (0x36) + Store (Arg0, ECCM) // write the command to 0x6c + if (IBFZ ()) { + // UPUT (0x37) + Return (One) + } + } + } + Return(Zero) + } + + // EC command (zero args) + Method (ECW0, 2, NotSerialized) + { + If (Acquire (MUEC, 0xFFFF)) { Return (One) } + + if (ECWC (Arg0)) { + Release(MUEC) + Return(One) + } + UPUT (0x2a) // * + Release(MUEC) + Return (Zero) + } + + // EC command - 1 arg + Method (ECW1, 2, NotSerialized) + { + If (Acquire (MUEC, 0xFFFF)) { Return (One) } + + if (ECWC (Arg0)) { + if (IBFZ ()) { + UPUT (0x2b) // + + UDOT (Arg1) + Store (Arg1, ECDA) // write the data to 0x68 + Release(MUEC) + Return(One) + } + } + UPUT (0x2a) // * + Release(MUEC) + Return (Zero) + } + + // EC command - 2 args + Method (ECW2, 3, NotSerialized) + { + If (Acquire (MUEC, 0xFFFF)) { Return (One) } + + if (ECWC (Arg0)) { + if (IBFZ ()) { + UPUT (0x2b) // + + UDOT (Arg1) + Store (Arg1, ECDA) // write the data to 0x68 + if (IBFZ ()) { + UPUT (0x2b) // + + UDOT (Arg2) + Store (Arg2, ECDA) // write the next data to 0x68 + Release(MUEC) + Return(One) + } + } + } + UPUT (0x2a) // * + Release(MUEC) + Return (Zero) + } + + // EC command - no arg, 1 return byte + Method (ECR1, 1, NotSerialized) + { + + If (Acquire (MUEC, 0xFFFF)) { Return (One) } + // UPUT (0x4c) // L + + If (ECWC (Arg0)) { + // UPUT (0x31) + Store (10, Local0) // Ten retries + While (Decrement(Local0)) { + // UPUT (0x32) + Store (ECRB (), Local1) + If (LNotEqual (Local1, Ones)) + { + UPUT (0x3d) // = + UDOT (Local1) + Release(MUEC) + Return (Local1) // Success + } + UPUT (0x2c) // , + } + } + UPUT (0x2a) // * + Release(MUEC) + Return (Ones) + } + + // EC command - one arg, one return byte + Method (ECWR, 2, NotSerialized) + { + Store (10, Local0) // Ten retries + + If (Acquire (MUEC, 0xFFFF)) { Return (One) } + + If (ECWC (Arg0)) { + if (IBFZ ()) { + UPUT (0x2b) // + + UDOT (Arg1) + Store (Arg1, ECDA) // write the data to 0x68 + While (Decrement(Local0)) { + Store (ECRB (), Local1) + If (LNotEqual (Local1, Ones)) + { + UPUT (0x3d) // = + UDOT (Local1) + Release(MUEC) + Return (Local1) // Success + } + UPUT (0x2c) // , + } + } + } + UPUT (0x2a) // * + Release(MUEC) + Return (Ones) + } + + Mutex (ACMX, 0x00) + + Device (AC) { /* AC adapter */ + Name (_HID, "ACPI0003") + Name (_PCL, Package (0x01) { _SB }) // Power consumer list - points to main system bus + + Method (_PSR, 0, NotSerialized) + { + If (LNot (Acquire (ACMX, 5000))) + { + UPUT (0x70) // p + // Store (ECRD (0xFA40), Local0) + Store (ECR1 (0x15), Local0) // CMD_READ_BATTERY_STATUS + Release (ACMX) + } + + // If (And (Local0, One)) + If (And (Local0, 0x10)) + { + Return (One) + } Else { + Return (Zero) + } + } + + Name (_STA, 0x0F) + } + + Name (BIFP, Package (0x0D) // Battery info (static) p 342 + { + One, // Power units - 1 : mAh / mA + 0x0ED8, // Design capacity + 0x0BB8, // Last Full Charge capacity + One, // rechargable + 0x1770, // Full voltage in mV + 0x01C2, // warning capacity + 0x0F, // low capacity + 0x01B3, // granularity between low and warning + 0x09F6, // granularity between warning and full + "NiMH (GP) ", // Model number + "", // serial number + "NiMH", // type + "OLPC " // OEM info + }) + + Name (BSTP, Package (0x04) // Battery status (dynamic) p 343 + { + Zero, // state - bitmask 1: discharging 2: charging 4: critical + 760, // current flow + 2910, // remaining capacity + 23306 // voltage in mV + }) + + Device (BATT) { + Name (_HID, EisaId ("PNP0C0A")) + Name (_UID, One) + Name (_PCL, Package (0x01) + { + _SB + }) + + Method (_STA, 0, NotSerialized) // Battery Status + { + + If (LNot (Acquire (ACMX, 5000))) + { + UPUT (0x73) // s + // Store (ECRD (0xFAA4), Local0) + Store (ECR1 (0x15), Local0) // CMD_READ_BATTERY_STATUS + Release (ACMX) + } + + If (And (Local0, One)) // ECRD(0xfaa4) & 0x01 => Battery inserted + { + Return (0x1F) + } Else { + Return (0x0F) + } + } + + Method (_BIF, 0, NotSerialized) // Battery Info + { + If (LNot (Acquire (ACMX, 5000))) + { + // Store (ECRD (0xFB5F), Local0) + Store (ECR1 (0x2c), Local0) // CMD_READ_BATTERY_TYPE + // Store (ECRD (0xF929), Local1) // FIXME -- BAT_SOC_WARNNING + Store (15, Local1) // EC hard-codes this (BAT_SOC_WARNNING) + Switch (Local0) + { + Case (0x11) + { + UPUT (0x42) // B + Store (3800, Index (BIFP, One)) + Store (3000, Index (BIFP, 2)) + Store (6000, Index (BIFP, 0x04)) + Multiply (Local1, 30, Local1) + Store (Local1, Index (BIFP, 5)) + Store (15, Index (BIFP, 6)) + Store (Subtract (Local1, 15), Index (BIFP, 7)) + Store (Subtract (3000, Local1), Index (BIFP, 8)) + Store ("NiMH (GP) ", Index (BIFP, 9)) + Store ("", Index (BIFP, 10)) + Store ("NiMH", Index (BIFP, 11)) + Store ("GoldPeak ", Index (BIFP, 0x0C)) + UPUT (0x62) // b + } + Case (0x12) + { + UPUT (0x44) // D + Store (3000, Index (BIFP, One)) + Store (2800, Index (BIFP, 2)) + Store (6000, Index (BIFP, 4)) + Multiply (Local1, 28, Local1) + Store (Local1, Index (BIFP, 5)) + Store (14, Index (BIFP, 6)) + Store (Subtract (Local1, 14), Index (BIFP, 7)) + Store (Subtract (2800, Local1), Index (BIFP, 8)) + Store ("LiFePO4 (GP) ", Index (BIFP, 9)) + Store ("", Index (BIFP, 10)) + Store ("LiFePO4", Index (BIFP, 11)) + Store ("GoldPeak ", Index (BIFP, 0x0C)) + UPUT (0x64) // d + } + Case (0x22) + { + UPUT (0x43) // C + Store (3550, Index (BIFP, One)) + Store (3100, Index (BIFP, 2)) + Store (6500, Index (BIFP, 4)) + Multiply (Local1, 31, Local1) + Store (Local1, Index (BIFP, 5)) + Store (15, Index (BIFP, 6)) + Store (Subtract (Local1, 15), Index (BIFP, 7)) + Store (Subtract (3100, Local1), Index (BIFP, 8)) + Store ("LiFePO4 (BYD) ", Index (BIFP, 9)) + Store ("", Index (BIFP, 10)) + Store ("LiFePO4", Index (BIFP, 11)) + Store ("BYD ", Index (BIFP, 0x0C)) + UPUT (0x63) // c + } + } + UPUT (0x49) // I + + Release (ACMX) + } + + Return (BIFP) + } + + Method (_BST, 0, NotSerialized) + { + If (LNot (Acquire (ACMX, 5000))) + { + UPUT (0x74) // t + // If (And (ECRD (0xFAA5), One)) + Store (ECR1(0x15), Local0) // CMD_READ_BATTERY_STATUS + If (And (Local0, 0x20)) + { + Store (0x02, Local1) // charging + } + ElseIf (And (Local0, 0x40)) // + { + Store (One, Local1) // discharging + } + + Sleep (15) + // Store (ECRD (0xF910), Local0) + Store (ECR1 (0x16), Local0) // CMD_READ_SOC + If (LLess (Local0, 15)) + { + Or (Local1, 4, Local1) // critical + } + + Store (Local1, Index (BSTP, Zero)) + Sleep (15) + + // Switch (ECRD (0xFB5F)) + Switch (ECR1 (0x2c)) // CMD_READ_BATTERY_TYPE + { + Case (0x11) + { + Store (760, Index (BSTP, One)) + Multiply (Local0, 30, Local2) + } + Case (0x22) + { + Store (1500, Index (BSTP, One)) + Multiply (Local0, 31, Local2) + } + Case (0x12) + { + Store (1500, Index (BSTP, One)) + Multiply (Local0, 28, Local2) + } + } + + Store (Local2, Index (BSTP, 2)) + Release (ACMX) + } + + Return (BSTP) + } + } + + Device(HPET) { + Name(_HID,EISAID("PNP0103")) + Name(_UID, 0) + Name(_CRS,ResourceTemplate() { + Memory32Fixed(ReadWrite, 0xfed00000, 0x00000400, MEM0) + }) + } + + Device(RMSC) { // all "PNP0C02" devices- pieces that don't fit anywhere else + Name(_HID,EISAID("PNP0C02")) // Generic motherboard devices + Name (_UID, 0x13) + + Name(CRS,ResourceTemplate(){ + + IO(Decode16,0x10,0x10,0x00,0x10) + IO(Decode16,0x22,0x22,0x00,0x1E) + IO(Decode16,0x44,0x44,0x00,0x1C) + IO(Decode16,0x62,0x62,0x00,0x02) + IO(Decode16,0x65,0x65,0x00,0x0B) + IO(Decode16,0x72,0x72,0x00,0x02) + IO(Decode16,0x76,0x76,0x00,0x09) + IO(Decode16,0x80,0x80,0x00,0x01) + IO(Decode16,0x84,0x84,0x00,0x03) + IO(Decode16,0x88,0x88,0x00,0x01) + IO(Decode16,0x8c,0x8c,0x00,0x03) + IO(Decode16,0x90,0x90,0x00,0x02) + IO(Decode16,0x92,0x92,0x00,0x01) // INIT & Fast A20 port + IO(Decode16,0x93,0x93,0x00,0x0C) + IO(Decode16,0xA2,0xA2,0x00,0x1E) + IO(Decode16,0xE0,0xE0,0x00,0x10) + IO(Decode16,0x380,0x380,0x00,0x8) // Additional EC port + IO(Decode16,0x3E0,0x3E0,0x00,0x8) + IO(Decode16,0x3F8,0x3F8,0x00,0x8) // UART + + // Reserve 4D0 and 4D1 for IRQ edge/level control port + IO(Decode16, 0x4D0,0x4D0,0x00,0x2) + // ACPI IO base address allocation + IO(Decode16, 0, 0, 0, 0, IO0) + // SMBus I/O space if applicable + IO(Decode16, 0, 0, 0, 0, IO1) + // SPI Memory Map IO Base + Memory32Fixed(ReadWrite, 0x00000000, 0x00000000, MEM0) + Memory32Fixed(ReadWrite, 0xfed30000, 0x00001000) // SPI MMIO + }) + + Method(_CRS, 0) + { + If(LEqual(_SB.PCI0.VT86.ENIO, 0x01)) // If we should privide the DSDT, ACPI IO must be enabled. + { + CreateWordField(CRS, ^IO0._MIN, MIN0) + CreateWordField(CRS, ^IO0._MAX, MAX0) + CreateByteField(CRS, ^IO0._LEN, LEN0) + Store(_SB.PCI0.VT86.IOBA, Local0) + ShiftLeft(Local0, 7, Local0) + Store(Local0, MIN0) + Store(Local0, MAX0) + Store(0x80, LEN0) + } + + If(LEqual(_SB.PCI0.VT86.ENSM, 0x01)) + { + CreateWordField(CRS, ^IO1._MIN, MIN1) + CreateWordField(CRS, ^IO1._MAX, MAX1) + CreateByteField(CRS, ^IO1._LEN, LEN1) + Store(_SB.PCI0.VT86.SMBA, Local0) + ShiftLeft(Local0, 4, Local0) + Store(Local0, MIN1) + Store(Local0, MAX1) + Store(0x10, LEN1) // Length: 16 Byte + } + + If(LNotEqual(_SB.PCI0.VT86.SPIB, 0x00)) + { + CreateDWordField(CRS, ^MEM0._BAS, BAS2) + CreateDWordField(CRS, ^MEM0._LEN, LEN2) + Store(_SB.PCI0.VT86.SPIB, Local0) + ShiftLeft(Local0, 8, Local0) + Store(Local0, BAS2) + Store(0x100, LEN2) + } + + Return(CRS) + } + } + + } // End of (VT86) + + Name(PICM, Package(){ + // VIA VGA Device(Integrated Graphics Device) + Package(){0x0001ffff, 0, _SB.PCI0.VT86.LNKA, 0}, // VGA, INTA + + //PCI Slot 1 + Package(){0x0008ffff, 0, _SB.PCI0.VT86.LNKA, 0}, // Slot 1, INTA + Package(){0x0008ffff, 1, _SB.PCI0.VT86.LNKA, 0}, // Slot 1, INTB + Package(){0x0008ffff, 2, _SB.PCI0.VT86.LNKA, 0}, // Slot 1, INTC + Package(){0x0008ffff, 3, _SB.PCI0.VT86.LNKA, 0}, // Slot 1, INTD + + //PCI Slot 2 + Package(){0x0009ffff, 0, _SB.PCI0.VT86.LNKA, 0}, // Slot 2, INTA + Package(){0x0009ffff, 1, _SB.PCI0.VT86.LNKA, 0}, // Slot 2, INTB + Package(){0x0009ffff, 2, _SB.PCI0.VT86.LNKA, 0}, // Slot 2, INTC + Package(){0x0009ffff, 3, _SB.PCI0.VT86.LNKA, 0}, // Slot 2, INTD + + //PCI Slot 3 + Package(){0x000Affff, 0, _SB.PCI0.VT86.LNKA, 0}, // Slot 3, INTA + Package(){0x000Affff, 1, _SB.PCI0.VT86.LNKA, 0}, // Slot 3, INTB + Package(){0x000Affff, 2, _SB.PCI0.VT86.LNKA, 0}, // Slot 3, INTC + Package(){0x000Affff, 3, _SB.PCI0.VT86.LNKA, 0}, // Slot 3, INTD + + // USB Device Controller + Package(){0x000Bffff, 0, _SB.PCI0.VT86.LNKA, 0}, + + // SDIO Controller + Package(){0x000cffff, 0, _SB.PCI0.VT86.LNKA, 0}, + // SD $ MS Controller + Package(){0x000dffff, 0, _SB.PCI0.VT86.LNKB, 0}, + // CE-ATA $ NF Controller(Card Boot) + Package(){0x000effff, 0, _SB.PCI0.VT86.LNKC, 0}, + // VIA VX800 IDE + Package(){0x000fffff, 0, _SB.PCI0.VT86.LNKB, 0}, + + // VIA UHCI USB1 Device + Package(){0x0010ffff, 0, _SB.PCI0.VT86.LNKA, 0}, + // VIA UHCI USB2 Device + Package(){0x0010ffff, 1, _SB.PCI0.VT86.LNKB, 0}, + // VIA UHCI USB3 Device + Package(){0x0010ffff, 2, _SB.PCI0.VT86.LNKC, 0}, + // VIA EHCI USB 2.0 Device + Package(){0x0010ffff, 3, _SB.PCI0.VT86.LNKD, 0}, + + // SB HDAC(Azalia) Audio + Package(){0x0014ffff, 0, _SB.PCI0.VT86.LNKA, 0}, // HD Audio, INTA + }) + + Name(APIC, Package(){ + // VIA VGA Device(Integrated Graphics Device) + Package(){0x0001ffff, 0, 0, 0x10}, + + //PCI Slot 1 + Package(){0x0008ffff, 0, 0, 0x10}, + Package(){0x0008ffff, 1, 0, 0x10}, + Package(){0x0008ffff, 2, 0, 0x10}, + Package(){0x0008ffff, 3, 0, 0x10}, + + //PCI Slot 2 + Package(){0x0009ffff, 0, 0, 0x10}, + Package(){0x0009ffff, 1, 0, 0x10}, + Package(){0x0009ffff, 2, 0, 0x10}, + Package(){0x0009ffff, 3, 0, 0x10}, + + //PCI Slot 3 + Package(){0x000Affff, 0, 0, 0x10}, + Package(){0x000Affff, 1, 0, 0x10}, + Package(){0x000Affff, 2, 0, 0x10}, + Package(){0x000Affff, 3, 0, 0x10}, + + // USB Device Controller + Package(){0x000Bffff, 0, 0, 0x13}, // USBD, INTA + + // SDIO Controller + Package(){0x000cffff, 0, 0, 0x16}, // SDIO, INTA + // SD $ MS Controller + Package(){0x000dffff, 0, 0, 0x17}, // Card Reader, INTA + // CE-ATA $ NF Controller(Card Boot) + Package(){0x000effff, 0, 0, 0x14}, // Card Boot(NAND Flash), INTA + // VIA VX800 IDE + Package(){0x000fffff, 0, 0, 0x15}, //IDE, INTA + + // VIA UHCI USB1 Device + Package(){0x0010ffff, 0, 0, 0x14}, + // VIA UHCI USB2 Device + Package(){0x0010ffff, 1, 0, 0x16}, + // VIA UHCI USB3 Device + Package(){0x0010ffff, 2, 0, 0x15}, + // VIA EHCI USB 2.0 Device + Package(){0x0010ffff, 3, 0, 0x17}, + + // SB HDAC(Azalia) Audio + Package(){0x0014ffff, 0, 0, 0x11}, //HD Audio , INTA + + }) // end of APIX + + Method(_PRT, 0, NotSerialized) + { + If(LNot(PICF)) + { + //PIC + Return(PICM) + } Else { + //APIC + Return(APIC) + } + } + + Device(P2PB) + { + Name (_ADR, 0x00130000) + + OperationRegion(RP2P,PCI_Config,0x00,0x100) + Field(RP2P,ByteAcc,NoLock,Preserve){ + Offset(0x00), + VID, 16, + Offset(0x04), + CMDR, 3, + Offset(0x19), + BUS1, 8, + } + + Method(_BBN,0) + { + Return(BUS1) + } + + Method(_STA, 0) + { + If(LNotEqual(_SB.PCI0.P2PB.VID, 0x1106)) { + Return(0x00) + } Else { + If(LEqual(_SB.PCI0.P2PB.CMDR, 0x00)) { + Return(0x0D) + } Else { + Return(0x0F) // present, enabled, functioning + } + } + } + + Name(PIC4, Package(){ + Package(){0x0003ffff, 0,_SB.PCI0.VT86.LNKA , 0}, + Package(){0x0003ffff, 1,_SB.PCI0.VT86.LNKA , 0}, + Package(){0x0003ffff, 2,_SB.PCI0.VT86.LNKA , 0}, + Package(){0x0003ffff, 3,_SB.PCI0.VT86.LNKA , 0}, + + Package(){0x0004ffff, 0,_SB.PCI0.VT86.LNKA , 0}, + Package(){0x0004ffff, 1,_SB.PCI0.VT86.LNKA , 0}, + Package(){0x0004ffff, 2,_SB.PCI0.VT86.LNKA , 0}, + Package(){0x0004ffff, 3,_SB.PCI0.VT86.LNKA , 0}, + + Package(){0x0005ffff, 0,_SB.PCI0.VT86.LNKA , 0}, + Package(){0x0005ffff, 1,_SB.PCI0.VT86.LNKA , 0}, + Package(){0x0005ffff, 2,_SB.PCI0.VT86.LNKA , 0}, + Package(){0x0005ffff, 3,_SB.PCI0.VT86.LNKA , 0}, + }) + + Name(API4, Package(){ + Package(){0x0003ffff, 0, 0, 0x10}, + Package(){0x0003ffff, 1, 0, 0x10}, + Package(){0x0003ffff, 2, 0, 0x10}, + Package(){0x0003ffff, 3, 0, 0x10}, + + Package(){0x0004ffff, 0, 0, 0x10}, + Package(){0x0004ffff, 1, 0, 0x10}, + Package(){0x0004ffff, 2, 0, 0x10}, + Package(){0x0004ffff, 3, 0, 0x10}, + + Package(){0x0005ffff, 0, 0, 0x10}, + Package(){0x0005ffff, 1, 0, 0x10}, + Package(){0x0005ffff, 2, 0, 0x10}, + Package(){0x0005ffff, 3, 0, 0x10}, + }) + + Method(_PRT, 0x0, NotSerialized) + { + If(LNot(PICF)) + { + Return(PIC4) + } Else { + Return(API4) + } + } + + Method(_PRW, 0x00, NotSerialized) + { + Return(Package(){0x05,4}) //PME# + } + Device(P4D3) + { + Name(_ADR, 0x00030000) + } + } // Device(P2PB) + + Device (EC) { + Name (_HID, "XO15EC") + Name (_PRW, Package (0x02) { 0x01, 0x04 }) // Event 01, wakes from S4 + Name (_GPE, 0x01) + + Method(_INI, 0) + { + UPUT (0x49) // I + } + + } // Device(EC) + + Device (EBK) { + Name (_HID, "XO15EBK") + Name (_PRW, Package (0x02) { 0x0A, 0x04 }) // Event 0A, wakes from S4 + + Method(_INI, 0) + { + Store (One, _SB.PCI0.VT86.ENTH) + Store (One, THRM) + Store (GPI9, TPOL) // init edge detect from current state + } + + Method(EBK) { + If (GPI9) { // non-zero --> switch is open + UPUT (0x65) // e + } Else { + UPUT (0x45) // E + } + If (LNotEqual(GPI9, TPOL)) { + Store (GPI9, TPOL) // (re)init edge detect + } + Return(GPI9) + } + } // Device(EBK) + + Device (LID) { + Name (_HID, EisaId ("PNP0C0D")) + Name (_PRW, Package (0x02) { 0x0B, 0x04 }) // Event 0B, wakes from S4 + + // set to 1 to enable LID wakeups on both open/close + Name (LIDX, 0) + + Method(_INI, 0) + { + Store (GPI7, LPOL) // init edge detect from current state + } + + Method(_LID) { + If (GPI7) { // non-zero --> switch (and lid) is open + UPUT (0x6c) // l + } Else { + UPUT (0x4c) // L + } + + If (LNotEqual(GPI7, LPOL)) { + Store (GPI7, LPOL) // (re)init edge detect + } + + Return(GPI7) + } + + Method (LIDW, 1) + { + Store (Arg0, LIDX) + } + + } // Device(LID) + + Device(HDAC) + { + Name(_ADR, 0x00140000) + + OperationRegion(RHDA,PCI_Config,0x00,0x100) + Field(RHDA,ByteAcc,NoLock,Preserve){ + Offset(0x00), + VID, 16, + Offset(0x04), + CMDR, 3, + } + + Method(_STA, 0) + { + If(LNotEqual(_SB.PCI0.HDAC.VID, 0x1106)) { + Return(0x00) + } Else { + If(LEqual(_SB.PCI0.HDAC.CMDR, 0x00)) { + Return(0x0D) + } Else { + Return(0x0F) // present, enabled, functioning + } + } + } + + Method(_PRW) + { + Return (Package(){0xD, 4}) + } + }//Device(HDAC) + + Name(DEVA, 0x3) //Replace the CMOS location, Since T-SEG SMM can not call INT10 any more + + Device(VGA) // Device + { + Name(_ADR,0x10000) + Name(SWIT,0x1) + Method(_DOS,1) // Enable/Disable Output Switching + { + Store(Arg0, SWIT) // Store the argument as the switch + } + + Method(_INI,0) // Enable Initial display + { + // BIOS don't switch display, but change _DGS + // Video Extension is used to help in switching . + store(DEVA, Local1) + + + If( LNotEqual(And(Local1, 0x2), 0x00) ) // LCD Turn On + { + Store( 0x1, _SB.PCI0.VGA.LCD._DGS) + } + Else + { + Store( 0x0, _SB.PCI0.VGA.LCD._DGS) + } + } + + + Name(_DOD,Package() //Package + { + 0x00010110, //LCD, detectable by BIOS + }) + + Device(LCD) + { + Name(_ADR,0x0110) + Name(_DCS,0x1F) //Return the status of output device + Name(_DGS,1) //Query Graphics Desired State + Method(_DSS,1) // Device Set State + { + // Device Set State + If(And(Arg0,0xC0000000)) + { + //If Bit30=1, don't do actual switching, but change _DGS to next state. + If(LEqual(And(Arg0,0x40000000), 0x00)) + { + Store(Arg0, Local0) + Store(And(Local0,0x1),Local0) + Store(Not(0x1), Local1) + Store(And(_SB.PCI0.VGA.LCD._DGS, Local1), _SB.PCI0.VGA.LCD._DGS) + Store(Or(_SB.PCI0.VGA.LCD._DGS, Local0),_SB.PCI0.VGA.LCD._DGS) + } + } + } + Method(_BCL) { + Return(Package(0x8) { + 100, + 50, + 20, + 30, + 40, + 60, + 80, + 90, + }) + } + Method(_BCM, 1) { + // Store(Arg0, _SB.PCI0.PIB.PORT80) + } + } + } + + } // Device(PCI0) + + //----------------------------------------------------------------------- + // System board extension Device node for ACPI BIOS + //----------------------------------------------------------------------- + /* + + Procedure: RMEM + + Description: System board extension Device node for ACPI BIOS + Place the device under _SB scope, As per Msft the MEM + Device is used to reserve Resources that are decoded out of PCI Bus + Important consideration : + Logic to reserve the memory within 0xC0000 - 0xFFFFF Extended BIOS area is based on assumption, + that the BIOS Post has detected all expansion ROMs in the region and made their memory ranges + shadowable ( copied to RAM at the same address, for performance reasons). + The rest of the region is left non-Shadowable, hence no memory is decoded there. + Such region is decoded to PCI bus (to be reserved in PCI0._CRS) + Whatever memory is Shadowed, thus, decoded as non "FF"s, is required to be reserved in "SYSM" + System board extension Device node, unless is not already reserved by some of PCI Device drivers. + There have been observed the difference of how Win9x & Win2000 + OSes deal with Expansion ROM memory. Win9x Device drivers are tend to claim its expension ROMs regions as used + by the device; Win2000 never use such ROM regions for its devices. Therefore there can be different + approach used for different OSes in reservation unclaimed memory in "SYSM" Device node. + is forwarded to PCI Bus + + Input: Nothing + + Output: _CRS buffer + + **************************************************************************/ + + Device(RMEM) { + Name(_HID, EISAID("PNP0C01")) // Hardware Device ID, System Board + Name(_UID, 1) + Name(CRS, ResourceTemplate() + { + // Base Address 0 - 0x9FFFF , 640k DOS memory + Memory32Fixed(ReadWrite,0x0000, 0xA0000 ) //Writeable + // Shadow RAM1, C0000 - E0000, 128k Expansion BIOS + Memory32Fixed(ReadOnly, 0x00000, 0x00000, RAM1) //Non-writeable + // Shadow RAM2, E0000 - 1M, 128k System BIOS + Memory32Fixed(ReadOnly, 0xE0000, 0x20000, RAM2) //Non-writeable + // Base Address 1M - Top of system present memory + Memory32Fixed(ReadWrite,0x100000,0x00000, RAM3) //Writeable + }) + + Method (_CRS, 0) + { + CreateDWordField(CRS, ^RAM1._BAS, BAS1) + CreateDWordField(CRS, ^RAM1._LEN, LEN1) + CreateDWordField(CRS, ^RAM2._BAS, BAS2) + CreateDWordField(CRS, ^RAM2._LEN, LEN2) + CreateDWordField(CRS, ^RAM3._LEN, LEN3) + + //RAM3 + Store(_SB.PCI0.MEMC.LTMA, Local0) + ShiftLeft(Local0, 0x10, Local2) + Store(_SB.PCI0.MEMC.ENIG, Local1) + If(LEqual(Local1, 1)) // Check whether the Internal Graphic is enabled. + { + Add(_SB.PCI0.MEMC.FBSZ, 2, Local3) + ShiftLeft(1, Local3, Local4) + ShiftLeft(Local4, 0x14, Local4) + Subtract(Local2, Local4, Local2) // Subtract the Framebuffer Size + } + Store(_SB.PCI0.MEMC.ENTS, Local1) + If(LEqual(Local1, 1)) // Check Whether the Top SMRAM Segment is Enabled + { + ShiftLeft(1, _SB.PCI0.MEMC.TSMS, Local5) + ShiftLeft(Local5, 0x14, Local5) + Subtract(Local2, Local5, Local2) // Subtract Top SM RAM Size + } + Subtract(Local2, 0x100000, LEN3) + + Return(CRS) + } + } + +}//Scope(_SB) +}
Modified: cpu/x86/pc/olpc/via/dsdt.bth ============================================================================== --- cpu/x86/pc/olpc/via/dsdt.bth Wed May 18 05:37:42 2011 (r2201) +++ cpu/x86/pc/olpc/via/dsdt.bth Thu May 19 08:11:17 2011 (r2202) @@ -4,6 +4,7 @@ build-now
" iasl -p dsdt -vi -vr -vs ../dsdt.dsl" expand$ $sh +" iasl -p dsdt-c2only -vi -vr -vs ../dsdt-c2only.dsl" expand$ $sh \ " iasl -vi -vr -vs ../fadt.dsl" expand$ $sh \ " iasl -vi -vr -vs ../ssdt.dsl" expand$ $sh
Modified: cpu/x86/pc/olpc/via/fw-version.fth ============================================================================== --- cpu/x86/pc/olpc/via/fw-version.fth Wed May 18 05:37:42 2011 (r2201) +++ cpu/x86/pc/olpc/via/fw-version.fth Thu May 19 08:11:17 2011 (r2202) @@ -1,3 +1,3 @@ \ The overall firmware revision macro: FW_MAJOR B -macro: FW_MINOR 03 +macro: FW_MINOR 04
Modified: cpu/x86/pc/olpc/via/olpc.bth ============================================================================== --- cpu/x86/pc/olpc/via/olpc.bth Wed May 18 05:37:42 2011 (r2201) +++ cpu/x86/pc/olpc/via/olpc.bth Thu May 19 08:11:17 2011 (r2202) @@ -160,8 +160,9 @@
" ${BP}/cpu/x86/pc/olpc/images/Edge1-8k-EQ-Comp-Amp-Short.wav" " splash" $add-deflated-dropin
- " ${BP}/cpu/x86/pc/olpc/via/build/dsdt.aml" " dsdt" $add-deflated-dropin -\ " ${BP}/cpu/x86/pc/olpc/via/build/ssdt.aml" " ssdt" $add-deflated-dropin + " ${BP}/cpu/x86/pc/olpc/via/build/dsdt.aml" " dsdt" $add-deflated-dropin + " ${BP}/cpu/x86/pc/olpc/via/build/dsdt-c2only.aml" " dsdt-c2only" $add-deflated-dropin +\ " ${BP}/cpu/x86/pc/olpc/via/build/ssdt.aml" " ssdt" $add-deflated-dropin
\ icons for mfg test gui " testicons/play.565" " play.565" $add-deflated-dropin
openfirmware@openfirmware.info
-
repository service