Author: wmb Date: 2008-08-06 09:01:20 +0200 (Wed, 06 Aug 2008) New Revision: 868
Modified: cpu/x86/pc/olpc/addrs.fth cpu/x86/pc/olpc/chipinit.fth cpu/x86/pc/olpc/config.fth cpu/x86/pc/olpc/devices.fth cpu/x86/pc/olpc/fw.bth cpu/x86/pc/olpc/fwsmall.bth cpu/x86/pc/olpc/gamekeys.fth cpu/x86/pc/olpc/gpioinit.fth cpu/x86/pc/olpc/loaddropins.fth cpu/x86/pc/olpc/lxearly.fth cpu/x86/pc/olpc/lxmsrs.fth cpu/x86/pc/olpc/mfgdata.fth cpu/x86/pc/olpc/micin.fth cpu/x86/pc/olpc/olpc.bth cpu/x86/pc/olpc/pcinode.fth cpu/x86/pc/olpc/probemem.fth cpu/x86/pc/olpc/smallconfig.fth cpu/x86/pc/olpc/vsapci.fth Log: OLPC - cleanup with no functional change. Removed unused lx-devel ifdef artifacts from the source code. The lx-devel version is now built in a separate directory, so there's no need to clutter the OLPC build with it.
Modified: cpu/x86/pc/olpc/addrs.fth =================================================================== --- cpu/x86/pc/olpc/addrs.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/addrs.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -9,15 +9,9 @@ [then]
[ifdef] rom-loaded -[ifdef] lx-devel -h# fff8.0000 constant rom-pa \ Physical address of boot ROM -h# 8.0000 constant /rom \ Size of boot ROM -rom-pa constant dropin-base -[else] h# fff0.0000 constant rom-pa \ Physical address of boot ROM h# 10.0000 constant /rom \ Size of boot ROM rom-pa h# 1.0000 + constant dropin-base -[then]
h# 8.0000 constant dropin-size
Modified: cpu/x86/pc/olpc/chipinit.fth =================================================================== --- cpu/x86/pc/olpc/chipinit.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/chipinit.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -46,11 +46,6 @@ 3 /l* +loop ( msr# ) drop true abort" No MSR entry" ; -\ [ifdef] lx-devel -\ msr: 5000.201f 00000000.0000007b. \ Posted writes for Legacy IDE registers -\ msr: 5101.00e0 60000000.1f0ffff8. \ IOD_BM Descriptor 0 ATA IO address -\ msr: 5130.0008 00000000.000018a1. \ IDE_IO_BAR - IDE bus master registers -\ [then]
: init-msr ( adr -- ) dup la1+ 2@ rot @ wrmsr ;
Modified: cpu/x86/pc/olpc/config.fth =================================================================== --- cpu/x86/pc/olpc/config.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/config.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -35,7 +35,7 @@
create resident-packages \ create use-watch-all -\ create use-root-isa +\ create use-root-isa \ If defined, isa node is in the devtree root, not under /pci create no-floppy-node create no-com2-node create no-lpt-node @@ -46,13 +46,8 @@ create save-msrs
create use-null-nvram \ Don't store configuration variables -\ create use-flash-nvram \ Store configuration variables in SPI FLASH +\ create use-flash-nvram \ Store configuration variables in firmware FLASH
-\ Uncomment this to compile for the LX development board -\ It's not possible to use one ROM image for both OLPC and -\ the LX board, because of the ROM size difference. -\ create lx-devel \ Support for the LX development board - fload ${BP}/cpu/x86/pc/olpc/addrs.fth
\ LICENSE_BEGIN
Modified: cpu/x86/pc/olpc/devices.fth =================================================================== --- cpu/x86/pc/olpc/devices.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/devices.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -136,9 +136,7 @@ devalias sd /sd/disk
dev /8042 -[ifndef] lx-devel patch false ctlr-selftest open -[then] device-end
0 0 " i70" " /isa" begin-package \ Real-time clock node @@ -274,8 +272,6 @@ ;
stand-init: Wireless reset -[ifdef] lx-devel exit [then] - \ Hit the reset on the Marvell wireless. It sometimes (infrequently) \ fails to enumerate after a power-cycle, and reset seems to fix it. \ We need > 85 ms between wlan-reset and probe-usb, but console-start @@ -345,7 +341,6 @@ \ The "1-" removes the null byte " SN" find-tag if 1- else " Unknown" then " serial-number" string-property
-[ifndef] lx-devel 8 ec-cmd-b@ " ec-version" integer-property
" PQ2" h# fff0.0000 h# 1.0000 sindex dup 0>= if ( offset ) @@ -354,7 +349,6 @@ drop " UNKNOWN" then " ec-name" string-property -[then]
dend
Modified: cpu/x86/pc/olpc/fw.bth =================================================================== --- cpu/x86/pc/olpc/fw.bth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/fw.bth 2008-08-06 07:01:20 UTC (rev 868) @@ -89,24 +89,6 @@
fload ${BP}/cpu/x86/pc/olpc/port80.fth \ Port 80 debug messages
-[ifdef] lx-devel -: pnp! ( b reg# -- ) h# 2e pc! h# 2f pc! ; -: pnp@ ( reg# -- b ) h# 2e pc! h# 2f pc@ ; - -: init-superio ( -- ) - h# 87 h# 2e pc! h# 87 h# 2e pc! \ Enable PNP registers - h# 20 pnp@ h# 52 = if \ Check device ID - h# 5 h# 7 pnp! \ Select keyboard controller - h# 60 h# 61 pnp! \ Port 60 - h# 64 h# 63 pnp! \ Port 64 - h# 1 h# 70 pnp! \ Keyboard interrupt 1 - h# c h# 72 pnp! \ Keyboard interrupt 12 - h# 83 h# f0 pnp! \ i8042 clock, fast reset, fast A20 - h# 1 h# 30 pnp! \ Enable - then -; -[then] - fload ${BP}/dev/geode/gpio.fth \ Rudimentary GPIO driver fload ${BP}/cpu/x86/pc/olpc/probemem.fth \ Memory probing
@@ -238,9 +220,6 @@ fload ${BP}/cpu/x86/pc/boot.fth
: usb-port-power-map ( -- n ) -[ifdef] lx-devel - h# 3ea exit \ USB4:PWR2 USB3:PWR1 USB2:PWR1 USB1:PWR1 -[then] board-revision h# b10 h# b2f between if \ B1 and B2 h# 3ab \ USB4:PWR1 USB3:PWR1 USB2:PWR1 USB1:PWR2 else @@ -284,9 +263,6 @@ protect-fw ." Interacting" cr hex interact then -[ifdef] lx-devel - init-superio -[then]
setup [else]
Modified: cpu/x86/pc/olpc/fwsmall.bth =================================================================== --- cpu/x86/pc/olpc/fwsmall.bth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/fwsmall.bth 2008-08-06 07:01:20 UTC (rev 868) @@ -128,9 +128,6 @@
[ifdef] use-usb : usb-port-power-map ( -- n ) -[ifdef] lx-devel - h# 3ea exit \ USB4:PWR2 USB3:PWR1 USB2:PWR1 USB1:PWR1 -[then] board-revision h# b10 h# b2f between if \ B1 and B2 h# 3ab \ USB4:PWR1 USB3:PWR1 USB2:PWR1 USB1:PWR2 else
Modified: cpu/x86/pc/olpc/gamekeys.fth =================================================================== --- cpu/x86/pc/olpc/gamekeys.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/gamekeys.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -31,7 +31,6 @@ ;
: read-game-keys ( -- ) -[ifdef] lx-devel false exit [then] board-revision h# b18 < if button-x to game-key-mask \ Force slow boot exit
Modified: cpu/x86/pc/olpc/gpioinit.fth =================================================================== --- cpu/x86/pc/olpc/gpioinit.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/gpioinit.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -1,4 +1,4 @@ -: olpc-gpio-init +: gpio-init \ h# f7ff0800 h# 1000 pl! \ GPIOL_OUTPUT_VALUE \ h# 36ffc900 h# 1004 pl! \ GPIOL_OUTPUT_ENABLE lx? if @@ -119,77 +119,7 @@ \ h# 00000000 h# 10fc pl! \ GPIOH_EVENT_DECREMENT - default ;
-[ifdef] lx-devel -0 [if] \ This_Is_Documentation - 0 I ~ INTA# - 1 O1 PCBEEP out AUX - 2 I1 IDEIRQ14 in - 3 O CRT_SCL - 4 O I CRT_SDA - 5 I IDE_CABLEID in - 6 I GPIO6 out page 26 check (also out from X4 connector pin 42) output from battery monitor header - 7 I ~ INTB# in 10,2025 - 8 O 2 O2 IRTX out - 9 I1 IRRX in -10 I1 THRM_ALRM# in -11 O1 SLP_CLK# out would be O1 for SLP_CLK_EN# -12 I ~ INTC# 10,25 -13 I ~ INTD#_SLPBUT 25 (I1 for SLPBUT) ?? -14 O1 I1 SMB_SCL -15 O1 I1 SMB_SDA - -16-20 LPC 21 LPC_SERIRQ 22 LPC_LFRAME - -24 O1 WORK_AUX out -25 I1 LOW_BAT# in -26 I PME# in 18,20,25 -27 O1 MFGPT7_C1 out 26 -28 I1 pwrbut# in -OutEn - 0900 c91a -OutA1 - 0900 c802 -OutA2 - 0000 0100 -InEn - 1600 f6f5 -InA1 - 1200 c604 -InInv - 0000 3081 -[then] - -: lx-devel-gpio-init ( -- ) -[ifdef] Insyde_GPIO_Settings - \ These are the settings that Insyde BIOS uses. I don't think they are right - h# 0900 h# 1090 pl! h# c002 h# 1010 pl! \ Output AUX1 (not SLP_CLK_EN) - h# 0000 h# 1094 pl! h# 000 h# 1014 pl! \ Output AUX2 (not IRTX) - h# 0900 h# 1084 pl! h# c002 h# 1004 pl! \ Output Enable (not SLP_CLK_EN#, IRTX, CRT_SDA, CRT_SCL) - h# 1000 h# 10a0 pl! h# f085 h# 1020 pl! \ Input Enable (not PME#, LOW_BAT#, THRM_ALRM, IRRX, GPIO6, IDE_CABLEID, CRT_SDA) - h# 1000 h# 10b4 pl! h# c004 h# 1034 pl! \ Input AUX1 (not LOW_BAT# THRM_ALRM IRRX) -[else] - h# 0900 h# 1090 pl! h# c802 h# 1010 pl! \ Output AUX1 - h# 0000 h# 1094 pl! h# 100 h# 1014 pl! \ Output AUX2 - h# 0900 h# 1084 pl! h# c91a h# 1004 pl! \ Output Enable - h# 1600 h# 10a0 pl! h# f6f5 h# 1020 pl! \ Input Enable - h# 1200 h# 10b4 pl! h# c604 h# 1034 pl! \ Input AUX1 -[then] - - h# 0000 h# 10a4 pl! h# 3081 h# 1024 pl! \ Input Invert (Int lines) - h# 0000 h# 10b8 pl! h# 3081 h# 1038 pl! \ Event enable (Int lines) - - h# 1000.0000 h# 1098 pl! \ No pullup on pwrbut_in - h# 1000 h# 10a8 pl! \ filter pwrbut_in - - h# 1000.0000 h# 101c pl! \ No pulldown on INTC# - h# 3081.cf7e h# 1018 pl! \ No pullups on INTA..D - - h# 0800 h# 1088 pl! \ MFGPT7_C1 is open drain -; -[then] - -: gpio-init ( -- ) -[ifdef] lx-devel lx-devel-gpio-init exit [then] - olpc-gpio-init -; - : fix-sirq ( -- ) -[ifdef] lx-devel exit [then] - 9 ec-cmd-b@ 9 <> if h# 5140.004e rdmsr swap h# 40 or swap h# 5140.004e wrmsr then
Modified: cpu/x86/pc/olpc/loaddropins.fth =================================================================== --- cpu/x86/pc/olpc/loaddropins.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/loaddropins.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -14,7 +14,6 @@ " ${BP}/dev/usb2/device/wlan/build/usb8388.fc" " usb1286,2001" $add-deflated-dropin " usb8388.bin" " usb8388.bin" $add-deflated-dropin
- \ XXX the PCI device IDs should be different for the different CaFe functions " ${BP}/dev/olpc/cafenand/build/cafenand.fc" " class050101" $add-deflated-dropin " ${BP}/dev/olpc/cafecamera/build/cafecamera.fc" " pci11ab,4102" $add-deflated-dropin
Modified: cpu/x86/pc/olpc/lxearly.fth =================================================================== --- cpu/x86/pc/olpc/lxearly.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/lxearly.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -14,9 +14,7 @@ 0000f001.00001000. 5140000c set-msr \ GPIO BAR
\ Init UART -[ifndef] lx-devel fload ${BP}/cpu/x86/pc/olpc/inituart.fth -[then] \ lx-devel
h# 11 # al mov al h# 80 # out h# 1430 # dx mov dx ax in h# 9999 # ax cmp = if
Modified: cpu/x86/pc/olpc/lxmsrs.fth =================================================================== --- cpu/x86/pc/olpc/lxmsrs.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/lxmsrs.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -213,12 +213,9 @@
msr: 5000.2014 00000000.00ffffff. \ Enables PCI access to low mem
-[ifdef] lx-devel - msr: 4800.2001 00000000.00040c00. \ Set VP reference clock divider to 0xc, not 0xe, CRT mode -[else] \ msr: 4800.2001 00000000.00040c08. \ Set VP reference clock divider to 0xc, not 0xe, TFT mode msr: 4800.2001 00000000.00048c08. \ Set VP reference clock divider to 0xc, not 0xe, TFT + CRT mode -[then] + \ The datasheet says the MSR number is 4800.0011, but that is wrong msr: 4800.2011 0000003f.dfffffff. \ Set TFT pads to registered
Modified: cpu/x86/pc/olpc/mfgdata.fth =================================================================== --- cpu/x86/pc/olpc/mfgdata.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/mfgdata.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -47,7 +47,6 @@ \ Mfg data used to be at the end of the EC erase block, but \ is now in a block by itself. : mfg-data-top ( -- adr ) -[ifdef] lx-devel h# ffff.fff0 exit [then] flash-base h# 1.0000 + dup invalid-tag? ( old-top data-adr flag ) nip if drop flash-base h# f.0000 + then ;
Modified: cpu/x86/pc/olpc/micin.fth =================================================================== --- cpu/x86/pc/olpc/micin.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/micin.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -25,7 +25,6 @@ : stand-init stand-init
-[ifdef] lx-devel exit [then] post-b1? if \ Configure GPIO as output for controlling MIC input AC/DC coupling 2 OUT_EN gpio!
Modified: cpu/x86/pc/olpc/olpc.bth =================================================================== --- cpu/x86/pc/olpc/olpc.bth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/olpc.bth 2008-08-06 07:01:20 UTC (rev 868) @@ -51,18 +51,12 @@ ;
.( --- Saving as ) -[ifdef] lx-devel -" lxd${FW_VERSION}.rom" expand$ 2dup lower ( adr len ) -[else] " ${FW_VERSION}.rom" expand$ 2dup lower ( adr len ) -[then] 2dup type cr ( adr len ) $new-file -[ifndef] lx-devel " ec.img" $add-file
dropin-base rom-pa - pad-file -[then]
" romreset.di" $add-file \ " romstart.di" $add-file @@ -71,15 +65,10 @@ fload ${BP}/cpu/x86/pc/olpc/loaddropins.fth " sourceurl" " sourceurl" $add-dropin
-[ifndef] lx-devel " ${BP}/clients/memtest86/memtest" " memtest" $add-deflated-dropin \ " ${BP}/cpu/x86/pc/olpc/images/olpc16EQima.wav" " splash" $add-deflated-dropin \ " ${BP}/cpu/x86/pc/olpc/images/Edge1-16k-EQ-Comp-Amp-ima.wav" " splash" $add-deflated-dropin " ${BP}/cpu/x86/pc/olpc/images/Edge1-8k-EQ-Comp-Amp-Short.wav" " splash" $add-deflated-dropin -[then] -[ifdef] lx-devel - " ${BP}/dev/pci/build/pcibridg.fc" " class060400" $add-deflated-dropin -[then] " ${BP}/cpu/x86/pc/olpc/build/dsdt.aml" " dsdt" $add-deflated-dropin \ " ${BP}/cpu/x86/pc/olpc/build/ssdt.aml" " ssdt" $add-deflated-dropin
Modified: cpu/x86/pc/olpc/pcinode.fth =================================================================== --- cpu/x86/pc/olpc/pcinode.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/pcinode.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -59,9 +59,6 @@ also forth definitions
: pci-probe-list ( -- adr len ) -[ifdef] lx-devel - " 2,3,4,5,6,7,8,9,a,b,c,d,e,f" exit -[then] " 1,c,f" ; \ " c,f" dup config-string pci-probe-list @@ -85,10 +82,6 @@ \ returning "int-line true" if the child's interrupt line register should \ be set or "false" otherwise. : assign-int-line ( phys.hi.func INTx -- irq true ) -[ifdef] lx-devel - \ XXX this is not good. We need to really assign - drop h# 3c + config-b@ true exit -[then]
[ifdef] rom-loaded \ The IRQ for the CaFe chip is b. The other devices aren't really
Modified: cpu/x86/pc/olpc/probemem.fth =================================================================== --- cpu/x86/pc/olpc/probemem.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/probemem.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -21,9 +21,6 @@
\ Excludes RAM assigned to the frame buffer : system-ram ( -- extant avail ) -[ifdef] lx-devel - h# f70.0000 exit -[then] fb-offset ;
Modified: cpu/x86/pc/olpc/smallconfig.fth =================================================================== --- cpu/x86/pc/olpc/smallconfig.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/smallconfig.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -45,11 +45,6 @@
create use-null-nvram
-\ Uncomment this to compile for the LX development board -\ It's not possible to use one ROM image for both OLPC and -\ the LX board, because of the ROM size difference. -\ create lx-devel \ Support for the LX development board - fload ${BP}/cpu/x86/pc/olpc/addrs.fth
\ LICENSE_BEGIN
Modified: cpu/x86/pc/olpc/vsapci.fth =================================================================== --- cpu/x86/pc/olpc/vsapci.fth 2008-08-04 18:33:08 UTC (rev 867) +++ cpu/x86/pc/olpc/vsapci.fth 2008-08-06 07:01:20 UTC (rev 868) @@ -230,7 +230,7 @@ 0 , 0 , 0 , 0 , fffffff0 , 0 , 0 , 0 , \ Maybe wrong
- 209a1022 , 2a00040 , 1018001 , f800 , + 209a1022 , 2a00041 , 1018001 , f800 , 0 , 0 , 0 , 0 , 18a1 , 0 , 0 , 209a1022 , 0 , 0 , 0 , 0 , @@ -490,7 +490,6 @@ ;
: preassigned-pci-slot? ( config-adr -- flag ) -[ifdef] lx-devel virtual-pci-slot? exit [then] drop true ;
@@ -529,7 +528,6 @@ h# 10e gxfb-hdr +methods h# 5c + w! \ Interrupt pin and line - INTA, IRQ 14 then
-[ifdef] lx-devel exit [then] assign-cafe \ FIXME - we really should fixup the NB and FB headers to use the \ AMD device IDs, add the AES device, and insert the VIP BAR.
openfirmware@openfirmware.info
-
svn＠openfirmware.info