openfirmware

openfirmware@openfirmware.info

3007 discussions

[commit] r3727 - dev/olpc
by repository service 04 Jun '14

04 Jun '14

Author: quozl Date: Wed Jun 4 08:39:34 2014 New Revision: 3727 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3727 Log: OLPC - add SIV121C camera sensor, as SIV120D is end-of-life Modified: dev/olpc/seti.fth Modified: dev/olpc/seti.fth ============================================================================== --- dev/olpc/seti.fth Sat May 10 05:44:05 2014 (r3726) +++ dev/olpc/seti.fth Wed Jun 4 08:39:34 2014 (r3727) @@ -1,14 +1,14 @@ -purpose: Driver for SETi image sensor +purpose: Driver for SETi image sensors hex -: seti-config ( ycrcb? -- ) +: siv120d-config ( ycrcb? -- ) >r ( r: ycrcb? ) \ SNR - 00 00 ov! + 00 00 ov! \ bank 0 00 04 ov! - 03 05 ov! -\ 33 07 ov! + 03 05 ov! \ CHIP_CNTR + \ 33 07 ov! 32 07 ov! 34 10 ov! 27 11 ov! @@ -35,8 +35,8 @@ d4 70 ov! \ anti-sat on 07 74 ov! \ anti-sat ini - 69 79 ov! \ anti-sat - + 69 79 ov! \ anti-sat + \ AWB 02 00 ov! d0 10 ov! @@ -45,7 +45,7 @@ 7f 13 ov! 7f 14 ov! fe 15 ov! \ R gain Top - 80 16 ov! \ R gain bottom + 80 16 ov! \ R gain bottom cb 17 ov! \ B gain Top 70 18 ov! \ B gain bottom 0x80 94 19 ov! \ Cr top value 0x90 @@ -62,7 +62,7 @@ 0f 26 ov! 01 27 ov! \ BRTSRT b4 28 ov! \ BRTRGNTOP result 0xad - b0 29 ov! \ BRTRGNBOT + b0 29 ov! \ BRTRGNBOT 92 2a ov! \ BRTBGNTOP result 0x90 8e 2b ov! \ BRTBGNBOT 88 2c ov! \ RGAINCONT @@ -109,12 +109,13 @@ \ IDP 03 00 ov! ff 10 ov! - 1d 11 ov! \ Change PIXDATA on falling edge of clock for better timing + 1d 11 ov! \ SIGCNT + \ Change PIXDATA on falling edge of clock for better timing 3d 12 ov! \ YUV422 setting; changed later if RGB565 04 14 ov! \ don't change \ DPCNR -\ 28 17 ov! \DPCNRCTRL + \ 28 17 ov! \ DPCNRCTRL 00 18 ov! \ DPTHR 56 19 ov! \ C DP Number ( Normal [7:6] Dark [5:4] ) | [3:0] DPTHRMIN 56 1A ov! \ G DP Number ( Normal [7:6] Dark [5:4] ) | [3:0] DPTHRMAX @@ -282,19 +283,386 @@ 00 00 ov! 05 03 ov! - ( r: ycrcb? ) r> 0= if ( ) 03 00 ov! \ IDP cb 12 ov! \ RGB565 setting then ; -: seti-set-mirrored ( mirrored? -- ) - 0 0 ov! 4 ov@ 1 ( mirrored? reg-value bit ) +: siv121c-config ( ycrcb? -- ) + >r ( r: ycrcb? ) + + \ PMU + 00 00 ov! + 04 03 ov! \ CHIP_CNTR + \ [7:6] PCLK output drive capability select + \ 00: 3mA + \ 01: 5.6mA + \ 10: 5.6mA + \ 11: 8.2mA + \ [5:4] Other output drive capability select + \ 00: 3mA + \ 01: 5.6mA + \ 10: 5.6mA + \ 11: 8.2mA + \ [3] SDA output drive capability select + \ 0: 2.6mA + \ 1: 5.2mA + \ [2] Output pad enable - It activates an output pin operation. + \ 0 All output pads are in HI_Z state (except SDA) + \ 1 Normal operation mode + \ [1] Control a S/W stand-by (power-down) mode + \ 0 Normal operation mode + \ 1 Stand-by mode + \ [0] ? + \ + \ XO-4, + \ f4 data inversions may appear after bright pixels of scan line + \ a4 normal image + \ 34 normal image + \ 04 normal image + 02 10 ov! \ LDO_LEVEL[1:0] = 2'b00 + + \ SNR + 01 00 ov! + 80 04 ov! \ CNTR_B + \ [7:6] Control fixed frame mode + \ 00 Normal operation mode + \ 01 Fixed frame mode @ exposure time <= frame size + \ Normal operation mode @ exposure time > frame size + \ 10/11 Fixed frame mode + \ [3:2] Clock (PCLK) divider – max 1/8 PCLK + \ 00: PCLK + \ 01: 1/2PCLK + \ 10: 1/4PCLK + \ 11: 1/8PCLK + \ [1] Control vertical flip image + \ 0 Normal image + \ 1 Vertical flip image + \ [0] Control horizontal flip (mirror) image + \ 0 Normal image + \ 1 Horizontal flip (mirror) image + + \ registers 07, 09 through to 1f, are undocumented in datasheet + c1 07 ov! \ recommend, BLC_CAL + 1e 10 ov! \ recommend, ramp_ref + 81 11 ov! \ recommend, ramp_sig_start level + 54 12 ov! \ recommend + 01 13 ov! \ recommend + 31 14 ov! \ recommend + 21 15 ov! \ recommend, px bias + + 84 17 ov! \ recommend, abs_cntr1 + 00 18 ov! \ recommend + c3 19 ov! \ recommend + + 00 20 ov! \ HBNK[11;8]/VBNK[11;8] + 65 21 ov! \ HBNK[7;0] + 03 22 ov! \ VBNK[7;0] //0x67 + + 63 23 ov! \ recommend + \ registers 25 through 50, reserved registers & sensor test + 52 42 ov! \ recommend + 00 43 ov! \ recommend + + \ AE + 02 00 ov! + 80 10 ov! + 10 11 ov! \ MAX_SHUTSTEP + \ minimum exposure time when automatic exposure in use, reduce to increase frame rate at low light levels at the expense of image brightness + 78 12 ov! \ D65 target + 78 13 ov! \ CWF target + 78 14 ov! \ A target + 00 1e ov! \ recommend, Initial C gain + 28 22 ov! \ recommend, Initial F gain + 7d 34 ov! \ STST //0x96 + 48 40 ov! \ recommend, Max x5 + + 40 42 ov! \ AG_TOP0 + 20 44 ov! \ AG_MIN0 + 21 45 ov! \ G50_dec + 2c 46 ov! \ G33_dec + 31 47 ov! \ G25_dec + 34 48 ov! \ G20_dec + 37 49 ov! \ G12_dec + 3a 4a ov! \ G09_dec + 3c 4b ov! \ G06_dec + 3e 4c ov! \ G03_dec + 3f 4d ov! \ G100_inc + 2f 4e ov! \ G50_inc + 2a 4f ov! \ G33_inc + 27 50 ov! \ G25_inc + 26 51 ov! \ G20_inc + 24 52 ov! \ G12_inc + 23 53 ov! \ G09_inc + 22 54 ov! \ G06_inc + 21 55 ov! \ G03_inc + + 02 56 ov! + 14 70 ov! + 58 79 ov! + + \ AWB + 03 00 ov! + d3 10 ov! + c0 11 ov! + 80 12 ov! + 7e 13 ov! \ Cr target + 80 14 ov! \ Cb target + fe 15 ov! \ R gain Top + 70 16 ov! \ R gain bottom + cb 17 ov! \ B gain Top + 70 18 ov! \ B gain bottom 0x80 + 94 19 ov! \ Cr top value 0x90 + 6c 1a ov! \ Cr bottom value 0x70 + 94 1b ov! \ Cb top value 0x90 + 6c 1c ov! \ Cb bottom value 0x70 + 94 1d ov! \ 0xa0 + 6c 1e ov! \ 0x60 + e8 20 ov! \ AWB luminous top value + 30 21 ov! \ AWB luminous bottom value 0x20 + a4 22 ov! + 20 23 ov! + ff 24 ov! + 20 25 ov! + 0f 26 ov! + 04 27 ov! \ BRTSRT + a0 28 ov! \ BRTRGNTOP result 0xad + a0 29 ov! \ BRTRGNBOT + ae 2a ov! \ BRTBGNTOP result 0x90 + 88 2b ov! \ BRTBGNBOT + 00 2c ov! \ RGAINCONT + + 00 30 ov! + 10 31 ov! + 00 32 ov! + 10 33 ov! + 02 34 ov! + 76 35 ov! + 01 36 ov! + d6 37 ov! + 01 40 ov! + 04 41 ov! + 08 42 ov! + 10 43 ov! + 12 44 ov! + 35 45 ov! + 64 46 ov! + + b3 63 ov! \ R D30 to D20 + c3 64 ov! \ B D30 to D20 + b3 65 ov! \ R D20 to D30 + c3 66 ov! \ B D20 to D30 + + dd 67 ov! \ R D65 to D30 + a0 68 ov! \ B D65 to D30 + dd 69 ov! \ R D30 to D65 + a0 6a ov! \ B D30 to D65 + + \ IDP + 04 00 ov! + 7f 10 ov! \ IPFUN + 1d 11 ov! \ SIGCNT + \ [7] Vertical Blank Time Control Enable + \ [6] VSYNC Data Selection + \ (1: Short VSYNC, 0: Long VSYNC) + \ [5] Dummy HSYNC Output Enable at Short VSYNC + \ [4] PCLK Clock Polarity Control + \ (1: Positive Data Sync, 0: Negative Data Sync) + \ [3] HSYNC Polarity Control + \ (1: Data Active at HIGH, 0: Data Active at LOW) + \ [2] VSYNC Polarity Control + \ (1: Data Active at LOW, 0: Data Active at HIGH) + \ [1] HSYNC Valid at VSYNC + \ (1: Valid, 0: Not Valid) + \ [0] PCLK Valid at VSYNC, HSYNC + 2d 12 ov! \ OUTFMT, set for yuv422 mode (see tail of word for rgb565 mode) + + \ DPCNR + 8f 18 ov! \ recommend, DPCCTRL [7] DPC Enable + \ [6:4] Reserved + \ [3] G1/G2 Mixed DPC for Full Mode + \ [2] G1/G2 Mixed DPC for Sub Mode + \ [1] DPC Method for Gx channel + \ 0 : Median in 8-neighbors + \ 1 : Maximum/Minimum in8-Neighbors + \ [0] DPC Method for Rx/Bx channel + \ 0 : Median in 8-neighbors + \ 1 : Maximum/Minimum in 8-Neighbors + 0f 19 ov! \ BNRCTRL [7] Highly Illumination and Flat Pixel + \ [6] Highly Illumination Pixel + \ [5] Flat Pixel + \ [4] Reserved + \ [3] BNR Enable + \ [2] G1/G2 Mixed NR for Full Mode + \ [1] G1/G2 Mixed NR for Sub Mode + \ [0] Twice Weight of X-direction Pixel of NR + 04 1a ov! \ recommend, DPCTHV [7:0] DPC Threshold Value @ IllumiInfo < STRTNOR + 12 1b ov! \ recommend, DPCTHVSLP [7:4] Decreasing DPC Threshold Slope @ STRTNOR < IllumiInfo < STRTDRK + \ [3:0] Decreasing DPC Threshold Slope @ IllumiInfo > STRTDRK + 08 1c ov! \ recommend, DPCTHVDIFSRT [5:0] Increasing DPC Threshold Starting Value via SAD Value + 08 1d ov! \ recommend, DPCTHVDIFSLP [5:0] Increasing DPC Threshold Slope via SAD Value ( 1/8 resolution, 0.000~8.000 ) + ff 1e ov! \ recommend, DPCTHVMAX [7:0] Maximum Limit of DPC Threshold Value + 5a 1f ov! \ recommend, DPCNUMGX [7:6] Gx DP Num @ Outdoor/Normal Condition for Full Mode + \ [5:4] Gx DP Num @ Outdoor/Normal Condition for Sub Mode + \ [3:2] Gx DP Num @ Dark Condition for Full Mode + \ [1:0] Gx DP Num @ Dark Condition for Sub Mode + 5a 20 ov! \ recommend, DPCNUMCX [7:6] Cx DP Num @ Outdoor/Normal Condition for Full Mode + \ [5:4] Cx DP Num @ Outdoor/Normal Condition for Sub Mode + \ [3:2] Cx DP Num @ Dark Condition for Full Mode + \ [1:0] Cx DP Num @ Dark Condition for Sub Mode + 08 21 ov! \ 0a \ BNRTHV [7:0] Bayer NR Threshold Value @ IllumiInfo < STRTNOR + 24 22 ov! \ 14 \ BNRTHVSLP [7:4] Increasing Bayer NR Threshold Slope @ STRTNOR < IllumiInfo < STRTDRK + \ [3:0] Increasing Bayer NR Threshold Slope @ IllumiInfo > STRTDRK + 00 23 ov! \ BNRNEICNT [7] Reserved + \ [6:4] Minimum NR Weight for + direction Pixel + \ [3] Reserved + \ [2:0] Minimum NR Weight for X direction Pixel + 04 24 ov! \ STRTNOR [7:0] IllumiInfo Threshold Point for Outdoor -> Indoor + 0f 25 ov! \ STRTDRK [7:0] IllumiInfo Threshold Point for Indoor -> Dark + + ad 2e ov! \ recommend, blc_calib + 45 2f ov! + + \ Gamma + 00 30 ov! \ 0x00 + 08 31 ov! \ 0x08 + 10 32 ov! \ 0x10 + 1b 33 ov! \ 0x1b + 37 34 ov! \ 0x37 + 4d 35 ov! \ 0x4d + 60 36 ov! \ 0x60 + 72 37 ov! \ 0x72 + 82 38 ov! \ 0x82 + 91 39 ov! \ 0x91 + a0 3a ov! \ 0xa0 + ba 3b ov! \ 0xba + d3 3c ov! \ 0xd3 + ea 3d ov! \ 0xeA + f5 3e ov! \ 0xf5 + ff 3f ov! \ 0xff + + \ Shading Register Setting + 0a 40 ov! + 87 41 ov! + 76 42 ov! + 65 43 ov! + 54 44 ov! + 43 45 ov! + 22 46 ov! \ left R gain[7:4], right R gain[3:0] + 31 47 ov! \ top R gain[7:4], bottom R gain[3:0] + 00 48 ov! \ left Gr gain[7:4], right Gr gain[3:0] 0x21 + 10 49 ov! \ top Gr gain[7:4], bottom Gr gain[3:0] + 00 4a ov! \ left Gb gain[7:4], right Gb gain[3:0] 0x02 + 10 4b ov! \ top Gb gain[7:4], bottom Gb gain[3:0] + 00 4c ov! \ left B gain[7:4], right B gain[3:0] + 11 4d ov! \ top B gain[7:4], bottom B gain[3:0] + 04 4e ov! \ X-axis center high[3:2], Y-axis center high[1:0] + 48 4f ov! \ X-axis center low[7:0] 0x50 + d8 50 ov! \ Y-axis center low[7:0] 0xf6 + 80 51 ov! \ Shading Center Gain + 00 52 ov! \ Shading R Offset + 00 53 ov! \ Shading Gr Offset + 00 54 ov! \ Shading Gb Offset + 00 55 ov! \ Shading B Offset + + \ INTERPOLATION + b7 61 ov! \ INTCTRL outdoor + 10 64 ov! \ 0c + + \ Color matrix (D65) - Daylight + 3B 71 ov! + CE 72 ov! + F7 73 ov! + 13 74 ov! + 25 75 ov! + 07 76 ov! + F2 77 ov! + C7 78 ov! + 47 79 ov! + + \ Color matrix (D30) - CWF + 3B 7a ov! + CE 7b ov! + F7 7c ov! + 13 7d ov! + 25 7e ov! + 07 7f ov! + F2 80 ov! + C7 81 ov! + 47 82 ov! + + \ Color matrix (D20) - A + 3c 83 ov! + c6 84 ov! + ff 85 ov! + 12 86 ov! + 24 87 ov! + 0a 88 ov! + ed 89 ov! + c2 8a ov! + 51 8b ov! + + 10 8c ov! \ CMA select + + \ G Edge + 20 90 ov! \ Upper gain + 20 91 ov! \ down gain + 11 92 ov! \ [7:4] upper coring [3:0] down coring + 13 9c ov! + 10 9d ov! + 84 af ov! \ Hue + + 10 b9 ov! + 20 ba ov! + + \ Window size + 24 c0 ov! + 00 c1 ov! + 80 c2 ov! + 00 c3 ov! + e0 c4 ov! + + + a0 de ov! + + 15 e5 ov! \ recommend, MEMSPDA + 02 e6 ov! \ recommend, MEMSPDB + 04 e7 ov! \ recommend, MEMSPDC + \ 02 e8 ov! \ TSTFUN, test functions + \ [7] Memory Test Mode + \ [6] Value Clip Test Mode + \ [5] Fix Value Test Mode + \ [4] Ramp Test Mode + \ [3] Vertical Stripe Pattern Test Mode + \ [2] Color Bar Pattern Test Mode + \ [1] Reserved + \ [0] Value Clip Test Mode Selection for LSB 8 bits + + \ Sensor On + 01 00 ov! + 01 03 ov! \ SNR Enable + + ( r: ycrcb? ) r> 0= if ( ) + 04 00 ov! \ IDP + cb 12 ov! \ OUTFMT, RGB565 setting + then +; + +: (set-mirrored) ( mirrored? -- ) + 4 ov@ 1 ( mirrored? reg-value bit ) rot if or else invert and then ( reg-value' ) 4 ov! ; +: siv120d-set-mirrored ( mirrored? -- ) + 0 0 ov! (set-mirrored) +; + +: siv121c-set-mirrored ( mirrored? -- ) + 1 0 ov! (set-mirrored) +; + : probe-seti ( -- found? ) h# 33 to camera-smb-slave ( ) camera-smb-on ( ) @@ -305,16 +673,28 @@ drop ( ) false exit ( -- false ) then ( regval ) - h# 12 <> if false exit then ( ) - " SETi,SIV120D" " sensor" string-property + dup h# 95 = if + " SETi,SIV121C" " sensor" string-property [ifdef] set-sensor-properties - " seti,siv120d" camera-smb-slave set-sensor-properties + " seti,siv121c" camera-smb-slave set-sensor-properties [then] + ['] siv121c-set-mirrored to set-mirrored + ['] siv121c-config to camera-config + drop true exit + then + + dup h# 12 = if + " SETi,SIV120D" " sensor" string-property +[ifdef] set-sensor-properties + " seti,siv120d" camera-smb-slave set-sensor-properties +[then] + ['] siv120d-set-mirrored to set-mirrored + ['] siv120d-config to camera-config + drop true exit + then - ['] seti-set-mirrored to set-mirrored - ['] seti-config to camera-config - true + drop false ; \ Chain of sensor recognizers

1 0

[commit] r3726 - dev/usb2/device/storage
by repository service 10 May '14

10 May '14

Author: quozl Date: Sat May 10 05:44:05 2014 New Revision: 3726 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3726 Log: scsidisk - retry TEST UNIT READY once Some USB flash drives violate section 3.4 of the USB Mass Storage Specification For Bootability 1.0, October 25, 2004, by responding to TEST UNIT READY with CHECK CONDITION status with a sense key of NOT READY, and an additional sense code of MEDIUM NOT PRESENT. Section 3.4 says "If the Device cannot become operational or in a state such that a Host Computer action is required to make the Device ready, the Device returns CHECK CONDITION status with a sense key of NOT READY." So the device either cannot become operational, or requires action of the host. However, a second TEST UNIT READY is successful, without any other action of the host other than trying again. READ CAPACITY and READ commands also fail if they are done first, before the device admits to being ready. Section 3.4 also says "Devices are expected to respond promptly to indicate the current status of the Device." Section 6.1 of the USB Mass Storage Class - Compliance Test Specification 0.9a, June 30, 2006, says "Issue a Test Unit Ready command. Repeat until the device indicates a ready state." Modified: dev/usb2/device/storage/scsidisk.fth Modified: dev/usb2/device/storage/scsidisk.fth ============================================================================== --- dev/usb2/device/storage/scsidisk.fth Tue Apr 29 23:06:32 2014 (r3725) +++ dev/usb2/device/storage/scsidisk.fth Sat May 10 05:44:05 2014 (r3726) @@ -43,6 +43,14 @@ " "(00 00 00 00 00 00)" drop no-data-command 0= ; +\ Some devices require a second TEST UNIT READY, despite returning +\ CHECK CONDITION, with sense NOT READY and MEDIUM NOT PRESENT. + +: retry-unit-ready? ( -- ready? ) + unit-ready? ?dup if exit then + unit-ready? +; + \ Ensures that the disk is spinning, but doesn't wait forever create sstart-cmd h# 1b c, 0 c, 0 c, 0 c, 1 c, 0 c, @@ -206,7 +214,7 @@ \ up to 30 secs to spin up. d# 45 d# 1000 * set-timeout - unit-ready? 0= if false exit then + retry-unit-ready? 0= if false exit then \ It might be a good idea to do an inquiry here to determine the \ device configuration, checking the result to see if the device

1 0

[commit] r3725 - cpu/arm cpu/arm/build cpu/x86/build forth/wrapper
by repository service 29 Apr '14

29 Apr '14

Author: tooch Date: Tue Apr 29 23:06:32 2014 New Revision: 3725 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3725 Log: core - Tiny lint fixes, detected on Apple LLVM-based SDK. And one not so tiny, as OS X dropped support for sbrk(). Modified: cpu/arm/armsim.c cpu/arm/build/Makefile cpu/x86/build/Makefile forth/wrapper/wrapper.c Modified: cpu/arm/armsim.c ============================================================================== --- cpu/arm/armsim.c Thu Apr 17 06:51:19 2014 (r3724) +++ cpu/arm/armsim.c Tue Apr 29 23:06:32 2014 (r3725) @@ -318,7 +318,7 @@ register u32 res; register u32 cond; register u32 temp; - u32 indent = 0; + s32 indent = 0; u32 name; u32 namelen; // u32 last_pc; @@ -448,12 +448,12 @@ switch (BXTYPE) { // P=0, U=1, bit22=0, W=0 - post-index, subtract offset, register, no writeback case 0x9: INSTR("umull"); - { unsigned long long result; - result = (unsigned long long)RM * (unsigned long long)RS; + { u64 result; + result = (u64)RM * (u64)RS; RN = (u32)((result >> 32) & 0xffffffffLL); RD = (u32)(result & 0xffffffffLL); if (S) { - N = (result < 0); + N = (RN & 0x80000000LL) ? 1 : 0; Z = (result == 0); } } @@ -516,7 +516,7 @@ case 0x5: case 0x7: INSTR("sbc"); SHFT(res); SBB(RD, res, RN, C); break; case 0x9: INSTR("smull"); - { long long result, a, b; + { s64 result, a, b; a = (int)RM; b = (int)RS; result = a * b; Modified: cpu/arm/build/Makefile ============================================================================== --- cpu/arm/build/Makefile Thu Apr 17 06:51:19 2014 (r3724) +++ cpu/arm/build/Makefile Tue Apr 29 23:06:32 2014 (r3725) @@ -32,5 +32,7 @@ # Don't use *.dic so as not to remove builder.dic clean: - rm -f tools.dic kernel.dic basefw.dic *.log headers *~ inflate.bin build *.tag - make -C ../${OS} clean + rm -f tools.dic kernel.dic basefw.dic + rm -f *.tag *.log headers *~ inflate.bin build + @make -C ../${OS} clean + @make -C ${HOSTDIR} clean Modified: cpu/x86/build/Makefile ============================================================================== --- cpu/x86/build/Makefile Thu Apr 17 06:51:19 2014 (r3724) +++ cpu/x86/build/Makefile Tue Apr 29 23:06:32 2014 (r3725) @@ -24,4 +24,6 @@ # Don't use *.dic so as not to remove builder.dic clean: - rm -f tools.dic kernel.dic basefw.dic *.log headers *~ inflate.bin build + rm -f tools.dic kernel.dic basefw.dic + rm -f *.tag *.log headers *~ inflate.bin build + make -C ../${OS} clean Modified: forth/wrapper/wrapper.c ============================================================================== --- forth/wrapper/wrapper.c Thu Apr 17 06:51:19 2014 (r3724) +++ forth/wrapper/wrapper.c Tue Apr 29 23:06:32 2014 (r3725) @@ -2111,7 +2111,12 @@ INTERNAL long m_sbrk(long size) { +#ifdef __APPLE__ + perror("forth: sbrk is no longer supported on Mac OS X 10.9\n"); + exit(1); +#else // Other UNIXs still support sbrk() return((long)sbrk(size)); +#endif } #endif

1 0

[commit] r3724 - cpu/arm/olpc/4.0
by repository service 17 Apr '14

17 Apr '14

Author: quozl Date: Thu Apr 17 06:51:19 2014 New Revision: 3724 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3724 Log: Q7B39 Modified: cpu/arm/olpc/4.0/fw-version.fth Modified: cpu/arm/olpc/4.0/fw-version.fth ============================================================================== --- cpu/arm/olpc/4.0/fw-version.fth Thu Apr 17 06:50:24 2014 (r3723) +++ cpu/arm/olpc/4.0/fw-version.fth Thu Apr 17 06:51:19 2014 (r3724) @@ -1,7 +1,7 @@ \ The overall firmware revision macro: FW_PREFIX Q7 macro: FW_MAJOR B -macro: FW_MINOR 38 +macro: FW_MINOR 39 \ Create a 2-character build/fw-suffix file to personalize your test builds " fw-suffix" $file-exists? [if]

1 0

[commit] r3723 - cpu/arm/olpc
by repository service 17 Apr '14

17 Apr '14

Author: quozl Date: Thu Apr 17 06:50:24 2014 New Revision: 3723 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3723 Log: OLPC XO-4 - dual boot menu, comment fixes Modified: cpu/arm/olpc/bootmenu.fth cpu/arm/olpc/chooseos.fth Modified: cpu/arm/olpc/bootmenu.fth ============================================================================== --- cpu/arm/olpc/bootmenu.fth Fri Apr 11 04:07:48 2014 (r3722) +++ cpu/arm/olpc/bootmenu.fth Thu Apr 17 06:50:24 2014 (r3723) @@ -1,4 +1,4 @@ -\ TODO: enable touchscreen +purpose: OLPC XO-4 boot menu, for dual boot (Android and Linux) \ ubuntu:/usr/share/app-install/icons/sugar-xo.svg icon: xos.icon rom:xos.565 Modified: cpu/arm/olpc/chooseos.fth ============================================================================== --- cpu/arm/olpc/chooseos.fth Fri Apr 11 04:07:48 2014 (r3722) +++ cpu/arm/olpc/chooseos.fth Thu Apr 17 06:50:24 2014 (r3723) @@ -1,4 +1,3 @@ -\ See license at end of file purpose: OS chooser for dual boot (Android and Linux) : choice-present? ( -- present? )

1 0

[commit] r3722 - in cpu: arm/olpc arm/olpc/4.0 x86/pc/olpc/images
by repository service 11 Apr '14

11 Apr '14

Author: quozl Date: Fri Apr 11 04:07:48 2014 New Revision: 3722 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3722 Log: OLPC XO-4 - dual boot menu for Android and Linux, using /boot-alt for the Android kernel Added: cpu/arm/olpc/bootmenu.fth cpu/arm/olpc/chooseos.fth cpu/x86/pc/olpc/images/android.565 (contents, props changed) cpu/x86/pc/olpc/images/xos.565 (contents, props changed) Modified: cpu/arm/olpc/4.0/olpc.bth cpu/arm/olpc/build-fw.fth Modified: cpu/arm/olpc/4.0/olpc.bth ============================================================================== --- cpu/arm/olpc/4.0/olpc.bth Fri Apr 11 04:05:29 2014 (r3721) +++ cpu/arm/olpc/4.0/olpc.bth Fri Apr 11 04:07:48 2014 (r3722) @@ -151,6 +151,10 @@ " ${BP}/cpu/x86/pc/olpc/images/leds.di" $add-file " ${BP}/cpu/x86/pc/olpc/images/ebook.di" $add-file + \ icons for boot menu + " ${BP}/cpu/x86/pc/olpc/images/android.565" " android.565" $add-deflated-dropin + " ${BP}/cpu/x86/pc/olpc/images/xos.565" " xos.565" $add-deflated-dropin + " nandblaster15_rx.bin" " nb15_rx" $add-deflated-dropin " nandblaster_tx.bin" " nb_tx" $add-deflated-dropin Added: cpu/arm/olpc/bootmenu.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/arm/olpc/bootmenu.fth Fri Apr 11 04:07:48 2014 (r3722) @@ -0,0 +1,55 @@ +\ TODO: enable touchscreen + +\ ubuntu:/usr/share/app-install/icons/sugar-xo.svg +icon: xos.icon rom:xos.565 + +\ The Android robot is reproduced or modified from work created and +\ shared by Google and used according to terms described in the +\ Creative Commons 3.0 Attribution License. +\ http://developer.android.com/distribute/googleplay/promote/brand.html +icon: android.icon rom:android.565 + +: choose-linux + restore-scroller ." Choosing Linux" cr + 0 " choose-os" eval + menu-done +; + +: choose-android + restore-scroller ." Choosing Android" cr + 1 " choose-os" eval + menu-done +; + +: boot-menu ( -- ) + d# 1 to rows + d# 5 to cols + + 0 0 set-row-col + " Linux/Sugar" + ['] choose-linux xos.icon 0 0 install-icon + + 0 4 set-row-col + " Android" + ['] choose-android android.icon 0 4 install-icon + + 0 2 selected 2drop +; + +: no-boot-menu ( -- ) + d# 1 to rows + d# 1 to cols + + " No operating system choice installed" + ['] quit-item quit.icon 0 0 selected install-icon +; + +: bootmenu + init-menu clear-menu + " choice-present?" eval if + ['] boot-menu to root-menu + else + ['] no-boot-menu to root-menu + then + (menu) +; Modified: cpu/arm/olpc/build-fw.fth ============================================================================== --- cpu/arm/olpc/build-fw.fth Fri Apr 11 04:05:29 2014 (r3721) +++ cpu/arm/olpc/build-fw.fth Fri Apr 11 04:07:48 2014 (r3722) @@ -691,6 +691,8 @@ fload ${BP}/cpu/x86/pc/olpc/sound.fth fload ${BP}/cpu/x86/pc/olpc/guardrtc.fth +fload ${BP}/cpu/arm/olpc/chooseos.fth +fload ${BP}/cpu/arm/olpc/bootmenu.fth fload ${BP}/cpu/x86/pc/olpc/security.fth stand-init: xid @@ -819,6 +821,12 @@ game-key-mask = if protect-fw try-fs-update then ; +: ?boot-menu ( -- ) + rocker-down game-key? if + protect-fw visible bootmenu show-child invisible + then +; + [ifdef] use-screen-kbd 0 value screen-kbd-ih : open-screen-keyboard ( -- ) @@ -935,6 +943,7 @@ \+ use-screen-kbd ?text-on ?diags ?fs-update + ?boot-menu factory-test? 0= if secure-startup then unblock-exceptions Added: cpu/arm/olpc/chooseos.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/arm/olpc/chooseos.fth Fri Apr 11 04:07:48 2014 (r3722) @@ -0,0 +1,15 @@ +\ See license at end of file +purpose: OS chooser for dual boot (Android and Linux) + +: choice-present? ( -- present? ) + \ TODO: number of partitions > 2, or specific android files present + true +; + +: choose-os ( n -- ) + if + button-o game-key-mask or to game-key-mask + else + button-o invert game-key-mask and to game-key-mask + then +; Added: cpu/x86/pc/olpc/images/android.565 ============================================================================== Binary file. No diff available. Added: cpu/x86/pc/olpc/images/xos.565 ============================================================================== Binary file. No diff available.

1 0

[commit] r3721 - dev
by repository service 11 Apr '14

11 Apr '14

Author: quozl Date: Fri Apr 11 04:05:29 2014 New Revision: 3721 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3721 Log: libertas - stack effect comment fix Modified: dev/libertas.fth Modified: dev/libertas.fth ============================================================================== --- dev/libertas.fth Wed Apr 9 06:54:11 2014 (r3720) +++ dev/libertas.fth Fri Apr 11 04:05:29 2014 (r3721) @@ -536,7 +536,7 @@ : process-pmic-failure ( -- ) ; : process-gmic-failure ( -- ) ; -: .event ?cr ." Event: " type cr ; +: .event ( $ -- ) ?cr ." Event: " type cr ; 0 instance value last-event 0 instance value backlog 0 value debug-tx-feedback?

1 0

[commit] r3720 - cpu/arm/olpc/4.0
by repository service 09 Apr '14

09 Apr '14

Author: quozl Date: Wed Apr 9 06:54:11 2014 New Revision: 3720 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3720 Log: Q7B38 Modified: cpu/arm/olpc/4.0/fw-version.fth Modified: cpu/arm/olpc/4.0/fw-version.fth ============================================================================== --- cpu/arm/olpc/4.0/fw-version.fth Fri Mar 28 02:30:36 2014 (r3719) +++ cpu/arm/olpc/4.0/fw-version.fth Wed Apr 9 06:54:11 2014 (r3720) @@ -1,7 +1,7 @@ \ The overall firmware revision macro: FW_PREFIX Q7 macro: FW_MAJOR B -macro: FW_MINOR 37 +macro: FW_MINOR 38 \ Create a 2-character build/fw-suffix file to personalize your test builds " fw-suffix" $file-exists? [if]

1 0

[commit] r3719 - in dev: . mmc/sdhci/mv8686
by repository service 28 Mar '14

28 Mar '14

Author: quozl Date: Fri Mar 28 02:30:36 2014 New Revision: 3719 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3719 Log: libertas - use a single byte sequence number for 8787, fixes use of adhoc-start with test-antenna Modified: dev/libertas.fth dev/mmc/sdhci/mv8686/libertas-interface.fth Modified: dev/libertas.fth ============================================================================== --- dev/libertas.fth Thu Mar 20 05:06:05 2014 (r3718) +++ dev/libertas.fth Fri Mar 28 02:30:36 2014 (r3719) @@ -188,7 +188,10 @@ -1 value fw-seq -: fw-seq++ ( -- seq ) fw-seq 1+ dup to fw-seq ; +defer fw-seq++ +: fw-seq-l++ ( -- seq ) fw-seq 1+ dup to fw-seq ; +: fw-seq-b++ ( -- seq ) fw-seq 1+ h# ff and dup to fw-seq ; +' fw-seq-l++ to fw-seq++ d# 30 constant resp-wait-tiny d# 1,000 constant resp-wait-short @@ -2143,6 +2146,7 @@ " " set-ssid \ Instance buffers aren't necessarily initially 0 opencount @ 0= if init-buf + mv8787? if ['] fw-seq-b++ to fw-seq++ then setup-transport if free-buf false exit then ds-ready to driver-state multifunction? if init-function then Modified: dev/mmc/sdhci/mv8686/libertas-interface.fth ============================================================================== --- dev/mmc/sdhci/mv8686/libertas-interface.fth Thu Mar 20 05:06:05 2014 (r3718) +++ dev/mmc/sdhci/mv8686/libertas-interface.fth Fri Mar 28 02:30:36 2014 (r3719) @@ -8,6 +8,7 @@ : data-out ( adr len -- ) " data-out" $call-parent ; : release-bus-resources ( -- ) " release-bus-resources" $call-parent ; : multifunction? ( -- flag ) " multifunction?" $call-parent ; +: mv8787? ( -- flag ) " mv8787?" $call-parent ; : set-parent-channel ( -- ) my-space " set-address" $call-parent ; : setup-transport ( -- error? ) false ; \ Done by parent

1 0

[commit] r3718 - ofw/core
by repository service 20 Mar '14

20 Mar '14

Author: quozl Date: Thu Mar 20 05:06:05 2014 New Revision: 3718 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3718 Log: core - use initial values from a current instance package if there is one, fixes clearing of display on subsequent select, caused by my-termemu not persisting, fixes OLPC #12765, thanks to Mitch Bradley. Modified: ofw/core/ofwcore.fth Modified: ofw/core/ofwcore.fth ============================================================================== --- ofw/core/ofwcore.fth Wed Mar 19 22:20:04 2014 (r3717) +++ ofw/core/ofwcore.fth Thu Mar 20 05:06:05 2014 (r3718) @@ -992,16 +992,16 @@ \ resource). If we ever need to make this ROMable, we can implement copy-on- \ write for initial values. -: >initial-value ( pfa -- adr ) - @ +: initial-values' ( -- adr ) my-self if \ Use current instance's package if there is a current instance my-voc (push-package) initial-values (pop-package) else \ Otherwise use the active package initial-values then - + ; +: >initial-value ( pfa -- adr ) @ initial-values' + ; + 3 actions action: >initial-value @ ; action: >initial-value ! ; @@ -1055,7 +1055,7 @@ ; \ Returns the address of the initial value of the named instance data. -: (initial-addr) ( adr -- adr' ) my-self - initial-values + ; +: (initial-addr) ( adr -- adr' ) my-self - initial-values' + ; : initial-addr \ name ( -- addr ) [compile] addr state @ if compile (initial-addr) else (initial-addr) then

1 0

← Newer
1
...
6
7
8
9
10
11
12
...
301
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

openfirmware