openfirmware

openfirmware@openfirmware.info

3007 discussions

r1135 - cpu/x86/pc
by svn＠openfirmware.info 02 Apr '09

02 Apr '09

Author: wmb Date: 2009-04-02 20:43:45 +0200 (Thu, 02 Apr 2009) New Revision: 1135 Modified: cpu/x86/pc/resetend.fth Log: Minor change to position of serial reports in resetend.h, affects only the unusual case where the FW dropin is not compressed. Modified: cpu/x86/pc/resetend.fth =================================================================== --- cpu/x86/pc/resetend.fth 2009-04-02 18:27:04 UTC (rev 1134) +++ cpu/x86/pc/resetend.fth 2009-04-02 18:43:45 UTC (rev 1135) @@ -111,6 +111,8 @@ ax call \ Inflate the firmware else h# 26 # al mov al h# 80 # out + ascii h report + \ The firmware dropin isn't compressed, so we just copy it to RAM 4 [ax] cx mov \ Length of firmware (byte-swapped) cx bswap \ cx: Length of firmware @@ -119,7 +121,6 @@ fw-virt-base # di mov \ Firmware RAM address (destination) cld rep byte movs \ Copy the firmware - ascii h report ascii m report then long-offsets off

1 0

r1134 - in dev/usb2: device/serial hcd hcd/ehci
by svn＠openfirmware.info 02 Apr '09

02 Apr '09

Author: wmb Date: 2009-04-02 20:27:04 +0200 (Thu, 02 Apr 2009) New Revision: 1134 Modified: dev/usb2/device/serial/uart.fth dev/usb2/device/serial/vendor.fth dev/usb2/hcd/ehci/ehci.fth dev/usb2/hcd/hcd.fth Log: Added Ajays USB debug device support to USB serial driver. Modified: dev/usb2/device/serial/uart.fth =================================================================== --- dev/usb2/device/serial/uart.fth 2009-04-02 18:26:16 UTC (rev 1133) +++ dev/usb2/device/serial/uart.fth 2009-04-02 18:27:04 UTC (rev 1134) @@ -13,6 +13,16 @@ : /string ( adr len cnt -- adr' len' ) tuck - -rot + swap ; +\ Don't do this until someone calls read. That makes the device +\ work as a console, with separate input and output instances +0 value read-started? +: ?start-reading ( -- ) + read-started? if exit then + read-q init-q + inbuf /bulk-in-pipe bulk-in-pipe begin-bulk-in + true to read-started? +; + external : install-abort ( -- ) ['] poll-tty d# 100 alarm ; \ Check for break @@ -21,6 +31,7 @@ \ Read at most "len" characters into the buffer at adr, stopping when \ no more characters are immediately available. : read ( adr len -- #read ) \ -2 for none available right now + ?start-reading rpoll dup 0= if nip exit then ( adr len ) read-q deque? 0= if ( adr len ) @@ -43,9 +54,8 @@ : open ( -- flag ) device set-target refcount @ 0= if - init-buf read-q init-q + init-buf inituart rts-dtr-on - inbuf /bulk-in-pipe bulk-in-pipe begin-bulk-in then refcount @ 1+ refcount ! true Modified: dev/usb2/device/serial/vendor.fth =================================================================== --- dev/usb2/device/serial/vendor.fth 2009-04-02 18:26:16 UTC (rev 1133) +++ dev/usb2/device/serial/vendor.fth 2009-04-02 18:27:04 UTC (rev 1134) @@ -3,6 +3,10 @@ headers hex +create uart-generic-list here + 525 w, 127a w, \ Ajays USB 2.0 Debug Cable +here swap - constant /uart-generic-list + create uart-pl2303-list here 557 w, 2008 w, \ ATEN, IOGear 67b w, 2303 w, \ PL2303 @@ -25,6 +29,11 @@ 921 w, 1000 w, \ GoHubs single port here swap - constant /uart-belkin-list +: uart-generic? ( vid pid -- flag ) + uart-generic-list /uart-generic-list find-vendor-product? +; + + : uart-pl2303? ( vid pid -- flag ) uart-pl2303-list /uart-pl2303-list find-vendor-product? ; @@ -41,5 +50,7 @@ 2dup uart-pl2303? if 2drop true exit then \ Not debugged yet... \ 2dup uart-mct? if 2drop true exit then - uart-belkin? + 2dup uart-belkin? if 2drop true exit then + 2dup uart-generic? if 2drop true exit then + 2drop false ; Modified: dev/usb2/hcd/ehci/ehci.fth =================================================================== --- dev/usb2/hcd/ehci/ehci.fth 2009-04-02 18:26:16 UTC (rev 1133) +++ dev/usb2/hcd/ehci/ehci.fth 2009-04-02 18:27:04 UTC (rev 1134) @@ -27,7 +27,8 @@ 0 0 my-space h# 0200.0010 + /regs map-in to ehci-reg ; : unmap-regs ( -- ) - 4 my-w@ 7 invert and 4 my-w! + \ Don't disable because somebody else might be using the controller. + \ 4 my-w@ 7 invert and 4 my-w! ehci-reg /regs map-out 0 to ehci-reg ; @@ -97,6 +98,32 @@ doorbell-wait ; +0 value dbgp-offset +0 value dbgp-bar + +: find-dbgp-regs ( -- ) + h# 34 my-l@ ( capability-ptr ) + begin dup while ( cap-offset ) + dup my-b@ h# 0a = if ( cfg-adr ) + 2+ my-w@ ( dbgp-ptr ) + dup h# 1fff and to dbgp-offset ( ) + d# 13 rshift 7 and 1- /l* h# 10 + to dbgp-bar + exit + then ( cfg-adr ) + 1+ my-b@ ( cap-offset' ) + repeat ( cap-offset ) + drop +; +: debug-port-active? ( -- flag ) + hcsparams@ h# f0.0000 and 0= if false exit then + find-dbgp-regs + dbgp-offset 0= if false exit then + \ We should take dbgp-bar into account, but for now we + \ just assume it's the same BAR as for the main registers. + dbgp-offset ehci-reg@ + h# 1000.0000 and 0<> +; + external : start-usb ( -- ) @@ -113,7 +140,8 @@ ; : reset-usb ( -- ) - ehci-reg dup 0= if map-regs then + ehci-reg dup 0= if map-regs then ( reg ) + debug-port-active? if drop exit then \ Don't kill the debug port! usbcmd@ 2 or 1 invert and usbcmd! \ HCReset d# 10 0 do usbcmd@ 2 and 0= ?leave Modified: dev/usb2/hcd/hcd.fth =================================================================== --- dev/usb2/hcd/hcd.fth 2009-04-02 18:26:16 UTC (rev 1133) +++ dev/usb2/hcd/hcd.fth 2009-04-02 18:27:04 UTC (rev 1134) @@ -57,6 +57,9 @@ \ Common routines \ --------------------------------------------------------------------------- +: my-b@ ( offset -- b ) my-space + " config-b@" $call-parent ; +: my-b! ( b offset -- ) my-space + " config-b!" $call-parent ; + : my-w@ ( offset -- w ) my-space + " config-w@" $call-parent ; : my-w! ( w offset -- ) my-space + " config-w!" $call-parent ;

1 0

r1133 - dev/usb2/device/generic
by svn＠openfirmware.info 02 Apr '09

02 Apr '09

Author: wmb Date: 2009-04-02 20:26:16 +0200 (Thu, 02 Apr 2009) New Revision: 1133 Added: dev/usb2/device/generic/build/ Log: Checked in build directory for generic USB device.

1 0

r1132 - cpu/x86/pc/olpc dev/usb2/device dev/usb2/device/generic dev/usb2/hcd
by svn＠openfirmware.info 02 Apr '09

02 Apr '09

Author: wmb Date: 2009-04-02 20:02:31 +0200 (Thu, 02 Apr 2009) New Revision: 1132 Added: dev/usb2/device/generic/ dev/usb2/device/generic/generic.bth dev/usb2/device/generic/generic.fth Modified: cpu/x86/pc/olpc/loaddropins.fth cpu/x86/pc/olpc/olpc.bth dev/usb2/hcd/fcode.fth Log: OLPC - added stub driver support for USB "generic" devices. Modified: cpu/x86/pc/olpc/loaddropins.fth =================================================================== --- cpu/x86/pc/olpc/loaddropins.fth 2009-04-01 14:38:06 UTC (rev 1131) +++ cpu/x86/pc/olpc/loaddropins.fth 2009-04-02 18:02:31 UTC (rev 1132) @@ -7,6 +7,7 @@ " ${BP}/dev/usb2/hcd/ohci/build/ohci.fc" " class0c0310" $add-deflated-dropin " ${BP}/dev/usb2/hcd/ehci/build/ehci.fc" " class0c0320" $add-deflated-dropin " ${BP}/dev/usb2/device/hub/build/hub.fc" " usb,class9" $add-dropin + " ${BP}/dev/usb2/device/generic/build/generic.fc" " usbdevice" $add-deflated-dropin " ${BP}/dev/usb2/device/net/build/usbnet.fc" " usbnet" $add-deflated-dropin " ${BP}/dev/usb2/device/keyboard/build/usbkbd.fc" " usb,class3,1" $add-dropin " ${BP}/dev/usb2/device/serial/build/usbserial.fc" " usbserial" $add-deflated-dropin Modified: cpu/x86/pc/olpc/olpc.bth =================================================================== --- cpu/x86/pc/olpc/olpc.bth 2009-04-01 14:38:06 UTC (rev 1131) +++ cpu/x86/pc/olpc/olpc.bth 2009-04-02 18:02:31 UTC (rev 1132) @@ -14,6 +14,7 @@ in: ${BP}/dev/usb2/hcd/ohci/build/ohci.fc in: ${BP}/dev/usb2/hcd/ehci/build/ehci.fc in: ${BP}/dev/usb2/device/hub/build/hub.fc +in: ${BP}/dev/usb2/device/generic/build/generic.fc in: ${BP}/dev/usb2/device/net/build/usbnet.fc in: ${BP}/dev/usb2/device/serial/build/usbserial.fc in: ${BP}/dev/usb2/device/storage/build/usbstorage.fc Added: dev/usb2/device/generic/generic.bth =================================================================== --- dev/usb2/device/generic/generic.bth (rev 0) +++ dev/usb2/device/generic/generic.bth 2009-04-02 18:02:31 UTC (rev 1132) @@ -0,0 +1,17 @@ +purpose: Load file for generic USB device + +command: &tokenize &this +build-now + +silent on + +begin-tokenizing generic.fc + +FCode-version2 + +fload ${BP}/dev/usb2/hcd/hcd-call.fth \ HCD interface forwarded to children +fload ${BP}/dev/usb2/device/generic/generic.fth \ Hub driver + +end0 + +end-tokenizing Added: dev/usb2/device/generic/generic.fth =================================================================== --- dev/usb2/device/generic/generic.fth (rev 0) +++ dev/usb2/device/generic/generic.fth 2009-04-02 18:02:31 UTC (rev 1132) @@ -0,0 +1,5 @@ +purpose: Generic USB device stub driver, useful for client programs + +external +: open ( -- flag ) true ; +: close ( -- ) ; Modified: dev/usb2/hcd/fcode.fth =================================================================== --- dev/usb2/hcd/fcode.fth 2009-04-01 14:38:06 UTC (rev 1131) +++ dev/usb2/hcd/fcode.fth 2009-04-02 18:02:31 UTC (rev 1132) @@ -95,6 +95,7 @@ 0 2 do i class$ $load if unloop exit then -1 +loop + " usbdevice" $load drop ; \ LICENSE_BEGIN

1 0

r1131 - dev/usb2/device/net
by svn＠openfirmware.info 01 Apr '09

01 Apr '09

Author: wmb Date: 2009-04-01 16:38:06 +0200 (Wed, 01 Apr 2009) New Revision: 1131 Modified: dev/usb2/device/net/ax8817x.fth dev/usb2/device/net/vendor.fth Log: USB Ethernet - added vendor/product ID codes for VIA and Apple AX88772 devices. Modified: dev/usb2/device/net/ax8817x.fth =================================================================== --- dev/usb2/device/net/ax8817x.fth 2009-04-01 14:10:48 UTC (rev 1130) +++ dev/usb2/device/net/ax8817x.fth 2009-04-01 14:38:06 UTC (rev 1131) @@ -17,6 +17,8 @@ h# 2001.3c05 of true exit endof \ ID for D-Link DUB-E100 rev B h# 07d1.3c05 of true exit endof \ Alternate ID for D-Link DUB-E100 rev B h# 0b95.7720 of true exit endof \ Another 88772 device, possibly ST Labs + h# 0b95.772a of true exit endof \ Chip on VIA demo board + h# 05ac.1402 of true exit endof \ Apple endcase false ; Modified: dev/usb2/device/net/vendor.fth =================================================================== --- dev/usb2/device/net/vendor.fth 2009-04-01 14:10:48 UTC (rev 1130) +++ dev/usb2/device/net/vendor.fth 2009-04-01 14:38:06 UTC (rev 1131) @@ -8,6 +8,7 @@ 07d1 w, 3c05 w, \ D-Link DUBE100 Rev B1 ax88772 2001 w, 1a00 w, \ D-Link DUBE100 Rev A ax88772 0b95 w, 7720 w, \ ST Lab + 0b95 w, 772a w, \ Chip on VIA demo board 13b1 w, 0018 w, \ Linksys USB200M ax88772 077b w, 2226 w, \ Linksys USB200M 0846 w, 1040 w, \ Netgear FA120 @@ -15,6 +16,7 @@ 0b95 w, 1720 w, \ ST Lab 07b8 w, 420a w, \ Hawking UF200 08dd w, 90ff w, \ Billionton Systems, USB2AR + 05ac w, 1402 w, \ Apple here swap - constant /net-ax8817x-list : net-ax8817x? ( vid pid -- flag )

1 0

r1130 - cpu/x86/pc/olpc
by svn＠openfirmware.info 01 Apr '09

01 Apr '09

Author: wmb Date: 2009-04-01 16:10:48 +0200 (Wed, 01 Apr 2009) New Revision: 1130 Modified: cpu/x86/pc/olpc/fw.bth Log: Q2E38 redux - Missing TS tag treated as manufacturing mode too. Modified: cpu/x86/pc/olpc/fw.bth =================================================================== --- cpu/x86/pc/olpc/fw.bth 2009-04-01 13:22:54 UTC (rev 1129) +++ cpu/x86/pc/olpc/fw.bth 2009-04-01 14:10:48 UTC (rev 1130) @@ -518,12 +518,16 @@ : ?factory-boot-sequence ( -- flag ) \ TS is the "test station" tag. Its value is set to "DL" at the \ end of manufacturing test. - " TS" find-tag if ( adr len ) - ?-null " DL" $= 0= if - " disk:\boot\olpc.fth nand:\boot\olpc.fth /xp sd:\boot\olpc.fth /prober /usb/ethernet /usb/wlan" - to boot-device - then - then + " TS" find-tag if ( adr len ) + ?-null " DL" $= 0= ( in-factory? ) + else ( ) + \ Missing TS tag is treated as in factory + true ( in-factory? ) + then ( in-factory? ) + if ( ) + " disk:\boot\olpc.fth nand:\boot\olpc.fth /xp sd:\boot\olpc.fth /prober /usb/ethernet /usb/wlan" + to boot-device + then ( ) ;

1 0

r1129 - cpu/x86/pc/olpc
by svn＠openfirmware.info 01 Apr '09

01 Apr '09

Author: wmb Date: 2009-04-01 15:22:54 +0200 (Wed, 01 Apr 2009) New Revision: 1129 Modified: cpu/x86/pc/olpc/fw.bth cpu/x86/pc/olpc/versions.fth Log: Q2E38 - Manufacturing mode boot order accidentally omitted wired LAN. Modified: cpu/x86/pc/olpc/fw.bth =================================================================== --- cpu/x86/pc/olpc/fw.bth 2009-03-31 00:58:15 UTC (rev 1128) +++ cpu/x86/pc/olpc/fw.bth 2009-04-01 13:22:54 UTC (rev 1129) @@ -520,7 +520,7 @@ \ end of manufacturing test. " TS" find-tag if ( adr len ) ?-null " DL" $= 0= if - " disk:\boot\olpc.fth nand:\boot\olpc.fth /xp sd:\boot\olpc.fth /prober /usb/wlan" + " disk:\boot\olpc.fth nand:\boot\olpc.fth /xp sd:\boot\olpc.fth /prober /usb/ethernet /usb/wlan" to boot-device then then Modified: cpu/x86/pc/olpc/versions.fth =================================================================== --- cpu/x86/pc/olpc/versions.fth 2009-03-31 00:58:15 UTC (rev 1128) +++ cpu/x86/pc/olpc/versions.fth 2009-04-01 13:22:54 UTC (rev 1129) @@ -2,7 +2,7 @@ \ The overall firmware revision macro: FW_MAJOR E -macro: FW_MINOR 37 +macro: FW_MINOR 38 \ The EC microcode macro: EC_VERSION e34

1 0

r1128 - cpu/x86/pc/olpc
by svn＠openfirmware.info 31 Mar '09

31 Mar '09

Author: wmb Date: 2009-03-31 02:58:15 +0200 (Tue, 31 Mar 2009) New Revision: 1128 Modified: cpu/x86/pc/olpc/versions.fth Log: Q2E37 Modified: cpu/x86/pc/olpc/versions.fth =================================================================== --- cpu/x86/pc/olpc/versions.fth 2009-03-31 00:44:18 UTC (rev 1127) +++ cpu/x86/pc/olpc/versions.fth 2009-03-31 00:58:15 UTC (rev 1128) @@ -2,7 +2,7 @@ \ The overall firmware revision macro: FW_MAJOR E -macro: FW_MINOR 36 +macro: FW_MINOR 37 \ The EC microcode macro: EC_VERSION e34

1 0

r1127 - in cpu/x86/pc: . olpc
by svn＠openfirmware.info 31 Mar '09

31 Mar '09

Author: wmb Date: 2009-03-31 02:44:18 +0200 (Tue, 31 Mar 2009) New Revision: 1127 Modified: cpu/x86/pc/biosints.fth cpu/x86/pc/olpc/fw.bth cpu/x86/pc/olpc/gamekeys.fth Log: OLPC - In manufacturing, change the boot order so that SD is after NAND. Modified: cpu/x86/pc/biosints.fth =================================================================== --- cpu/x86/pc/biosints.fth 2009-03-24 17:54:51 UTC (rev 1126) +++ cpu/x86/pc/biosints.fth 2009-03-31 00:44:18 UTC (rev 1127) @@ -1165,6 +1165,7 @@ 0 0 " " " /" begin-package " xp" device-name : open + bypass-bios-boot? if false exit then " sd:1" ntfs? if " sd:0" set-hd-boot true exit Modified: cpu/x86/pc/olpc/fw.bth =================================================================== --- cpu/x86/pc/olpc/fw.bth 2009-03-24 17:54:51 UTC (rev 1126) +++ cpu/x86/pc/olpc/fw.bth 2009-03-31 00:44:18 UTC (rev 1127) @@ -515,6 +515,18 @@ \ .built cr ; +: ?factory-boot-sequence ( -- flag ) + \ TS is the "test station" tag. Its value is set to "DL" at the + \ end of manufacturing test. + " TS" find-tag if ( adr len ) + ?-null " DL" $= 0= if + " disk:\boot\olpc.fth nand:\boot\olpc.fth /xp sd:\boot\olpc.fth /prober /usb/wlan" + to boot-device + then + then +; + + : console-start ( -- ) [ifdef] rom-loaded video-map cr @@ -589,6 +601,7 @@ no-page ?factory-mode + ?factory-boot-sequence console-start Modified: cpu/x86/pc/olpc/gamekeys.fth =================================================================== --- cpu/x86/pc/olpc/gamekeys.fth 2009-03-24 17:54:51 UTC (rev 1126) +++ cpu/x86/pc/olpc/gamekeys.fth 2009-03-31 00:44:18 UTC (rev 1127) @@ -60,3 +60,5 @@ drop (cr kill-line ; ' (hold-message) to hold-message + +: bypass-bios-boot? ( -- flag ) button-square game-key? ;

1 0

r1126 - cpu/x86/pc/olpc
by svn＠openfirmware.info 24 Mar '09

24 Mar '09

Author: wmb Date: 2009-03-24 18:54:51 +0100 (Tue, 24 Mar 2009) New Revision: 1126 Modified: cpu/x86/pc/olpc/versions.fth Log: Q2E36 Modified: cpu/x86/pc/olpc/versions.fth =================================================================== --- cpu/x86/pc/olpc/versions.fth 2009-03-24 03:54:11 UTC (rev 1125) +++ cpu/x86/pc/olpc/versions.fth 2009-03-24 17:54:51 UTC (rev 1126) @@ -2,7 +2,7 @@ \ The overall firmware revision macro: FW_MAJOR E -macro: FW_MINOR 35 +macro: FW_MINOR 36 \ The EC microcode macro: EC_VERSION e34

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

openfirmware