openfirmware

openfirmware@openfirmware.info

3007 discussions

[commit] r2423 - cpu/x86/pc/alex/build
by repository service 06 Aug '11

06 Aug '11

Author: wmb Date: Sat Aug 6 00:34:19 2011 New Revision: 2423 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2423 Log: Initial checkin of Makefile for "Alex" ChromeBook. Added: cpu/x86/pc/alex/build/Makefile Added: cpu/x86/pc/alex/build/Makefile ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/x86/pc/alex/build/Makefile Sat Aug 6 00:34:19 2011 (r2423) @@ -0,0 +1,24 @@ +OS := $(shell uname) + +all: ofw.elf + +ofw.elf: FORCE build ../../../build/inflate.bin + ./build $@ + +../../../${OS}/forth: + @make -C ../../../${OS} forth + +../../../build/inflate.bin: + @make -C ../../../build inflate.bin + +build: ../../../${OS}/forth + @ln -sf ../../../${OS}/forth build + +clean: + rm -f *.dic *.log headers *~ *.elf *.di *.img builton.fth build + +clean-all: clean + @make -C ../../../build clean + @make -C ../../../${OS} clean + +.PHONY: FORCE clean all clean-all

1 0

[commit] r2422 - in cpu/x86/pc/alex: . build
by repository service 06 Aug '11

06 Aug '11

Author: wmb Date: Sat Aug 6 00:33:55 2011 New Revision: 2422 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2422 Log: Initial checkin of platform files for "Alex" ChromeBook. Added: cpu/x86/pc/alex/addrs.fth cpu/x86/pc/alex/build/ cpu/x86/pc/alex/config.fth cpu/x86/pc/alex/devices.fth cpu/x86/pc/alex/fw.bth cpu/x86/pc/alex/ofw.bth cpu/x86/pc/alex/pcinode.fth cpu/x86/pc/alex/probemem.fth cpu/x86/pc/alex/reset.bth cpu/x86/pc/alex/start.bth cpu/x86/pc/alex/usb.fth Added: cpu/x86/pc/alex/addrs.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/x86/pc/alex/addrs.fth Sat Aug 6 00:33:55 2011 (r2422) @@ -0,0 +1,56 @@ +\ See license at end of file +purpose: Establish address and I/O configuration definitions + +\ Dropin-base is where the set of dropin modules, the verbatim +\ image of what is stored in ROM or on disk, ends up in memory. +\ If OFW is in FLASH, dropin-base can just be the FLASH address. +\ If OFW is pulled in from disk, dropin-base is where the very +\ early startup code - the first few instructions in the image - +\ copies it to get it out of the way of things like OS load areas. + +h# 198.0000 constant dropin-base \ Location of payload in RAM +dropin-base h# 20 + constant ResetBase \ Location of "reset" dropin in RAM +h# 8.0000 constant dropin-size + +\needs fw-pa h# 7f00.0000 constant fw-pa \ OFW dictionary location +\needs /fw-ram h# 20.0000 constant /fw-ram + +\needs heap-base h# 7f20.0000 constant heap-base \ Dynamic allocation heap +\needs heap-size h# 20.0000 constant heap-size + +\needs dma-base h# 7ee0.0000 constant dma-base \ DMA heap +\needs dma-size h# 20.0000 constant dma-size + +\ Where OFW initially loads an OS that is is going to boot + +h# 100.0000 constant def-load-base \ Convenient for initrd + +fload ${BP}/cpu/x86/pc/virtaddr.fth + +[ifdef] virtual-mode +h# 3 constant pte-control \ Page table entry attributes +[then] + +\ LICENSE_BEGIN +\ Copyright (c) 2006 FirmWorks +\ +\ Permission is hereby granted, free of charge, to any person obtaining +\ a copy of this software and associated documentation files (the +\ "Software"), to deal in the Software without restriction, including +\ without limitation the rights to use, copy, modify, merge, publish, +\ distribute, sublicense, and/or sell copies of the Software, and to +\ permit persons to whom the Software is furnished to do so, subject to +\ the following conditions: +\ +\ The above copyright notice and this permission notice shall be +\ included in all copies or substantial portions of the Software. +\ +\ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +\ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +\ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +\ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +\ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +\ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +\ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +\ +\ LICENSE_END Added: cpu/x86/pc/alex/config.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/x86/pc/alex/config.fth Sat Aug 6 00:33:55 2011 (r2422) @@ -0,0 +1,64 @@ +purpose: Configuration setting for OFW as a Coreboot payload on Samsung "Alex" Chromebook +\ See license at end of file + +h# e0401000 constant mem-uart-base + +create coreboot-loaded +create coreboot-qemu +create debug-startup + +create serial-console + +\ In virtual mode, OFW runs with the MMU on. The advantages are +\ that OFW can automatically locate itself out of the way, at the +\ top of physical memory, it can dynamically allocate exactly as +\ much physical memory as it needs, and it can remain alive after +\ the OS starts. The disadvantage is that it is more confusing - +\ you always have to be aware of the distinction between virtual +\ and physical addresses. + +\ If you use virtual mode for Linux, you can debug past +\ the point where Linux starts using the MMU. It is not strictly +\ necessary to use virtual mode if you just want to boot Linux +\ and then have OFW disappear. + +\ create virtual-mode + +\ linux-support includes a bzImage file-format handler +\ and ext2 filesystem support + +create linux-support + +\ create pseudo-nvram +create resident-packages +create addresses-assigned \ Don't reassign PCI addresses +create no-floppy-node +create no-lpt-node +create no-com1-node +create no-com2-node + +fload ${BP}/cpu/x86/pc/alex/addrs.fth + +\ LICENSE_BEGIN +\ Copyright (c) 2011 FirmWorks +\ +\ Permission is hereby granted, free of charge, to any person obtaining +\ a copy of this software and associated documentation files (the +\ "Software"), to deal in the Software without restriction, including +\ without limitation the rights to use, copy, modify, merge, publish, +\ distribute, sublicense, and/or sell copies of the Software, and to +\ permit persons to whom the Software is furnished to do so, subject to +\ the following conditions: +\ +\ The above copyright notice and this permission notice shall be +\ included in all copies or substantial portions of the Software. +\ +\ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +\ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +\ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +\ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +\ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +\ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +\ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +\ +\ LICENSE_END Added: cpu/x86/pc/alex/devices.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/x86/pc/alex/devices.fth Sat Aug 6 00:33:55 2011 (r2422) @@ -0,0 +1,199 @@ +\ See license at end of file +purpose: Load device drivers according to configuration definitions + +fload ${BP}/cpu/x86/pc/isaio.fth + +fload ${BP}/dev/pci/configm1.fth \ Generic PCI configuration access + +0 0 " " " /" begin-package + fload ${BP}/cpu/x86/pc/mappci.fth \ Map PCI to root + fload ${BP}/dev/pcibus.fth \ Generic PCI bus package + + 0 0 " addresses-preassigned" property +[then] + + fload ${BP}/cpu/x86/pc/alex/pcinode.fth \ System-specific words for PCI +end-package +stand-init: PCI host bridge + " /pci" " init" execute-device-method drop +; + +fload ${BP}/dev/pciprobe.fth \ Generic PCI probing + +[ifdef] use-timestamp-counter +\ Use the CPU chip's Time Stamp Counter for timing; it does just what we want +fload ${BP}/cpu/x86/tsc.fth +[then] + +0 0 " " " /" begin-package + fload ${BP}/cpu/x86/pc/isabus.fth \ ISA Bus Bridge under root node +end-package + +[ifndef] use-timestamp-counter +fload ${BP}/cpu/x86/pc/getms.fth +[then] + +dev /interrupt-controller +h# 20 to vector-base0 +h# 28 to vector-base1 +device-end + +fload ${BP}/ofw/fs/cbfs.fth \ Coreboot ROM filesystem + +\ Create the top-level device node to access the entire boot FLASH device +0 0 " ffc00000" " /" begin-package + " flash" device-name + + h# 40.0000 value /device + h# 40.0000 constant /device-phys + my-address my-space /device-phys reg + fload ${BP}/dev/flashpkg.fth + fload ${BP}/dev/flashwrite.fth +end-package + +devalias cbfs /flash//cbfs-file-system + +0 [if] +\ This really should be a subrange of /flash +0 0 dropin-base <# u#s u#> " /" begin-package + " dropinram" device-name + + dropin-size + dup value /device + constant /device-phys + my-address my-space /device-phys reg + fload ${BP}/dev/flashpkg.fth +end-package + +devalias dropins /dropinram +[else] +patch /l /di-header first-header +patch /l /di-header first-header +devalias dropins cbfs:fallback\payload +[then] + +\ Create a pseudo-device that presents the dropin modules as a filesystem. +fload ${BP}/ofw/fs/dropinfs.fth + +\ This devalias lets us say, for example, "dir rom:" +devalias rom /dropin-fs + +fload ${BP}/cpu/x86/forthint.fth \ Low-level interrupt handling code +fload ${BP}/dev/isa/irq.fth \ ISA interrupt dispatcher +fload ${BP}/cpu/x86/pc/isatick.fth \ Use ISA timer as the alarm tick timer + +[ifdef] resident-packages +support-package: 16550 +fload ${BP}/dev/16550pkg/16550.fth \ Serial port support package +end-support-package +[then] + +fload ${BP}/dev/pci/isaall.fth +devalias mouse /isa/8042/mouse + +[ifdef] use-timestamp-counter +fload ${BP}/cpu/x86/pc/tsccal1.fth +[then] + +0 0 hex mem-uart-base (u.) " /" begin-package + 4 encode-int 0 encode-int encode+ " interrupts" property + fload ${BP}/dev/16550pkg/ns16550p.fth + d# 64,000,000 " clock-frequency" integer-property + fload ${BP}/dev/16550pkg/isa-int.fth +end-package +devalias com1 /serial:115200 +: com1 ( -- adr len ) " com1" ; ' com1 to fallback-device + +0 0 " i70" " /isa" begin-package \ Real-time clock node + fload ${BP}/dev/ds1385r.fth + 8 encode-int 0 encode-int encode+ " interrupts" property + 2 encode-int " device#" property +end-package +stand-init: RTC + " /rtc" open-dev clock-node ! +; + +fload ${BP}/cpu/x86/pc/cpunode.fth + +fload ${BP}/ofw/core/countdwn.fth \ Startup countdown +fload ${BP}/forth/lib/pattern.fth \ Text string pattern matching +fload ${BP}/forth/lib/tofile.fth \ to-file and append-to-file +\ XXX remove the OS file commands from tools.dic +fload ${BP}/ofw/core/filecmds.fth \ File commands: dir, del, ren, etc. + +0 0 " 2,0" " /pci" begin-package + " display" name + fload ${BP}/dev/intel/graphics/pineview.fth +end-package +devalias screen /pci/display@2,0 \ Explicit, because it's not probed + +\ Create the alias unless it already exists +: $?devalias ( alias$ value$ -- ) + 2over not-alias? if $devalias exit then ( alias$ value$ alias$ ) + 2drop 4drop +; + +: report-pci-fb ( -- ) + " /pci/display" locate-device 0= if ( phandle ) + " open" rot find-method if ( xt ) + drop + " screen" " /pci/display" $devalias + then + then +; + +: report-disk ( -- ) + " /pci-ide" locate-device 0= if + drop + " disk" " /pci-ide/ide@0/disk@0" $devalias + " c" " /pci-ide/ide@0/disk@0" $devalias + " d" " /pci-ide/ide@0/disk@1" $devalias + " e" " /pci-ide/ide@1/disk@0" $devalias + " f" " /pci-ide/ide@1/disk@1" $devalias + exit + then + " /ide" locate-device 0= if + drop + " disk" " /ide@1f0/disk@0" $devalias + " c" " /ide@1f0/disk@0" $devalias + " d" " /ide@170/disk@1" $devalias + " e" " /ide@1f0/disk@0" $devalias + " f" " /ide@170/disk@2" $devalias + exit + then +; + +fload ${BP}/cpu/x86/inoutstr.fth \ Multiple I/O port read/write +fload ${BP}/dev/isa/diaguart.fth \ ISA COM port driver +fload ${BP}/forth/lib/sysuart.fth \ Use UART for key and emit + +0 value keyboard-ih +0 value screen-ih + +fload ${BP}/ofw/core/muxdev.fth \ I/O collection/distribution device + +fload ${BP}/cpu/x86/pc/reset.fth \ reset-all + +\ LICENSE_BEGIN +\ Copyright (c) 2011 FirmWorks +\ +\ Permission is hereby granted, free of charge, to any person obtaining +\ a copy of this software and associated documentation files (the +\ "Software"), to deal in the Software without restriction, including +\ without limitation the rights to use, copy, modify, merge, publish, +\ distribute, sublicense, and/or sell copies of the Software, and to +\ permit persons to whom the Software is furnished to do so, subject to +\ the following conditions: +\ +\ The above copyright notice and this permission notice shall be +\ included in all copies or substantial portions of the Software. +\ +\ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +\ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +\ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +\ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +\ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +\ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +\ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +\ +\ LICENSE_END Added: cpu/x86/pc/alex/fw.bth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/x86/pc/alex/fw.bth Sat Aug 6 00:33:55 2011 (r2422) @@ -0,0 +1,324 @@ +\ See license at end of file +purpose: Build Open Firmware core + +dictionary: ${BP}/cpu/x86/build/basefw.dic +command: &x86forth &dictionary &this +in: builton.fth +build-now + +" fw.tag" r/w create-file drop tag-file ! + +hex +\ ' $report-name is include-hook + +fload ${BP}/cpu/x86/pc/alex/config.fth + +: headerless ; : headers ; : headerless0 ; + +' (quit) to quit + +: \Tags [compile] \ ; immediate +: \NotTags [compile] \ ; immediate + +: RAMbase ( -- adr ) fw-virt-base ; +: RAMtop ( -- adr ) RAMbase /fw-ram + ; + +h# 00.0000 value dp-loc \ Set in patchboot +: stacktop ( -- adr ) RAMtop ; +: dict-limit ( -- adr ) RAMtop h# 06.0000 - ; + +\ XXX What we should do is pass in the top address in SP, and have +\ boot.fth allocate the user area by subtracting user-size. But +\ we need some way of finding it again for exception re-entry. +\ prom-main-task is used in arch/pc/boot.fth . The constant +\ value is wired into the assembly code +stacktop user-size - ( fw-virt-base - ) constant prom-main-task \ user area for main task + +0 value load-limit \ Top address of area at load-base +' 2drop to sync-cache + +def-load-base ' load-base set-config-int-default + +true ' fcode-debug? set-config-int-default +\ false ' auto-boot? set-config-int-default + +" com1" ' output-device set-config-string-default +" com1" ' input-device set-config-string-default + +\ XXX should be loaded by basefw.bth +fload ${BP}/cpu/x86/initpgm.fth \ Basic boot handler +fload ${BP}/cpu/x86/msr.fth \ Access to machine specific registers + +: (cpu-arch ( -- adr len ) + " architecture" ['] root-node get-package-property drop + get-encoded-string +; +' (cpu-arch to cpu-arch + +h# 1000 to pagesize +d# 12 to pageshift + +dev / +1 encode-int " #address-cells" property +1 encode-int " #size-cells" property +" Generic PC" model +" PC" encode-string " architecture" property + +\ XXX figure out bus frequency. How? +\ d# 33,333,333 " clock-frequency" integer-property +device-end + +\ Memory management services +[ifdef] virtual-mode +fload ${BP}/ofw/core/clntmem1.fth \ client services for memory +[else] +fload ${BP}/ofw/core/clntphy1.fth \ client services for memory +[then] +fload ${BP}/ofw/core/memlist.fth \ Resource list common routines +fload ${BP}/ofw/core/showlist.fth \ Linked list display tool +fload ${BP}/ofw/core/allocph1.fth \ S Physical memory allocator +fload ${BP}/ofw/core/availpm.fth \ Available memory list +fload ${BP}/ofw/core/allocmor.fth \ Secondary allocator + +fload ${BP}/cpu/x86/pc/rootnode.fth \ Platform-specific root node changes + +fload ${BP}/cpu/x86/pc/alex/probemem.fth \ Memory probing + +[ifdef] virtual-mode +fload ${BP}/cpu/x86/loadvmem.fth \ /mmu node +stand-init: MMU + " /mmu" open-dev mmu-node ! +; +fload ${BP}/cpu/x86/pc/initdict.fth \ Dynamic dictionary allocation +[then] + +\ XXX should be elsewhere +dev /client-services +: chain ( len args entry size virt -- ) + release ( len args entry ) + h# 8000 alloc-mem h# 8000 + (init-program) ( len args ) + to %ebx to %ecx + go +; +device-end + +fload ${BP}/cpu/x86/crc32.fth \ Assembly language Zip CRC calculation +fload ${BP}/forth/lib/crc32.fth \ High-level portion of CRC calculation + +[ifdef] resident-packages + +\needs unix-seconds> fload ${BP}/ofw/fs/unixtime.fth \ Unix time calculation +support-package: ext2-file-system + fload ${BP}/ofw/fs/ext2fs/ext2fs.fth \ Linux file system +end-support-package + +support-package: zip-file-system + fload ${BP}/ofw/fs/zipfs.fth \ Zip file system +end-support-package + +support-package: dropin-file-system + fload ${BP}/ofw/fs/dropinfs.fth \ Dropin file system +end-support-package +[then] + +\ Load file format handlers + +: call32 ; + +fload ${BP}/ofw/core/allocsym.fth \ Allocate memory for symbol table +fload ${BP}/ofw/core/symcif.fth +fload ${BP}/ofw/core/symdebug.fth +: release-load-area ( boundary-adr -- ) drop ; + +fload ${BP}/cpu/x86/pc/fixkbd.fth \ Switch keyboard scan codes + +fload ${BP}/ofw/elf/elf.fth +fload ${BP}/ofw/elf/elfdebug.fth +[ifdef] virtual-mode +\ Depends on the assumption that physical memory is mapped 1:1 already +: (elf-map-in) ( va size -- ) 0 mem-claim drop ; +[else] +: (elf-map-in) ( va size -- ) 2drop ; +[then] +' (elf-map-in) is elf-map-in + +\ Reboot and re-entry code +fload ${BP}/cpu/x86/pc/reboot.fth \ Restart the client program +fload ${BP}/cpu/x86/pc/reenter.fth \ Various entries into Forth + +headerless +[ifdef] virtual-mode +: (initial-heap) ( -- adr len ) sp0 @ ps-size - dict-limit tuck - ; +[else] +: (initial-heap) ( -- adr len ) heap-base heap-size ; +[then] +' (initial-heap) is initial-heap +headers + +" /openprom" find-device + " FirmWorks,3.0" encode-string " model" property +device-end + +[ifdef] virtual-mode +fload ${BP}/cpu/x86/pc/mmusetup.fth \ Initial values for MMU lists +[then] + +fload ${BP}/cpu/x86/pc/rmtools.fth + +fload ${BP}/cpu/x86/pc/alex/devices.fth + +true ' local-mac-address? set-config-int-default +fload ${BP}/ofw/inet/loadtcp.fth + +support-package: http + fload ${BP}/ofw/inet/http.fth \ HTTP client +end-support-package + +[ifndef] use-timestamp-counter +fload ${BP}/cpu/x86/pc/mscal.fth +[then] +fload ${BP}/cpu/x86/pc/boot.fth +fload ${BP}/cpu/x86/pc/linux.fth + +hex +\ If there is a PCI ethernet adapter, use it as the default net device, +\ otherwise use any ethernet that can be found in the device tree. +: report-net ( -- ) + " /pci/ethernet" 2dup find-package if ( name$ phandle ) + drop ( name$ ) + else ( name$ ) + 2drop " /ethernet" ( name$' ) + then ( name$ ) + " net" 2swap $devalias ( ) +; + +fload ${BP}/cpu/x86/pc/alex/usb.fth + +\ false to stand-init-debug? +true to stand-init-debug? + +hex +stand-init-debug? [if] +warning @ warning off +: init +\ initial-heap add-memory + init + + standalone? if + cr ." Type 'i' to interrupt stand-init sequence" cr + d# 1000 ms + key? if + key upc ascii I = if ." Interacting" cr hex interact then + then + then +\ cr0@ h# 9fff.ffff and cr0! \ enable L1 and L2 caches +; +warning ! +[then] + +: (.firmware) ( -- ) + ." Open Firmware " .built cr + ." Copyright 1999 FirmWorks All Rights Reserved" cr +; +' (.firmware) to .firmware + +: linux-logo ( -- ) + " penguin.txt" find-drop-in if page type then +; + +: probe-all ( -- ) + " probe-" do-drop-in + ." probe-pci" cr +\ debug-me + probe-pci + probe-usb + report-net + report-disk + report-pci-fb +; + +\ This reduces processor use when waiting for a key. It helps +\ a lot when running on an emulator. +: c1-idle ( -- ) interrupts-enabled? if halt then ; +' c1-idle to stdin-idle + +: startup ( -- ) + standalone? 0= if exit then + ." calibrate-ms" cr + calibrate-ms + + ." nvramrc" cr + use-nvramrc? if nvramrc safe-evaluate then + + auto-banner? if + " Probing" ?type probe-all + install-mux-io +\ " Install console" ?type install-console +\ ?usb-keyboard + banner + then + + hex + warning on + only forth also definitions + + ." Installing alarms" cr + install-alarm + + #line off + + ." Open Firmware demonstration version by FirmWorks (info(a)firmworks.com)" cr + +[ifdef] linux-support + ." See " + blue-letters ." http://www.firmworks.com/linux/demo.html" black-letters + cr cr + + ." Type 'help-linux' to learn about Linux loading options" cr +[then] + quit +; + +fload ${BP}/cpu/x86/pc/watchall.fth + +alias crcgen drop ( crc byte -- crc' ) +fload ${BP}/cpu/x86/pc/saveabs.fth + +fload ${BP}/forth/lib/selstr.fth + +\needs ramdisk " " d# 128 config-string ramdisk +" console=tty0 console=ttyS0,115200" ' boot-file set-config-string-default + +" dhcp" ' ip-address set-config-string-default + +tag-file @ fclose tag-file off + +.( SAVING FW.dic ...) +" fw.dic" $save-forth cr + +.( Saving fw.img ...) +" fw.img" RAMbase save-abs-rom cr + +\ LICENSE_BEGIN +\ Copyright (c) 2011 FirmWorks +\ +\ Permission is hereby granted, free of charge, to any person obtaining +\ a copy of this software and associated documentation files (the +\ "Software"), to deal in the Software without restriction, including +\ without limitation the rights to use, copy, modify, merge, publish, +\ distribute, sublicense, and/or sell copies of the Software, and to +\ permit persons to whom the Software is furnished to do so, subject to +\ the following conditions: +\ +\ The above copyright notice and this permission notice shall be +\ included in all copies or substantial portions of the Software. +\ +\ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +\ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +\ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +\ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +\ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +\ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +\ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +\ +\ LICENSE_END Added: cpu/x86/pc/alex/ofw.bth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/x86/pc/alex/ofw.bth Sat Aug 6 00:33:55 2011 (r2422) @@ -0,0 +1,62 @@ +purpose: Construct the final OFW image + +command: &builder &this +in: reset.di +in: start.di +in: ${BP}/cpu/x86/pc/alex/build/paging.di +in: fw.img +in: ${BP}/dev/usb2/hcd/ohci/build/ohci.fc +in: ${BP}/dev/usb2/hcd/uhci/build/uhci.fc +in: ${BP}/dev/usb2/hcd/ehci/build/ehci.fc +in: ${BP}/dev/usb2/device/hub/build/hub.fc +in: ${BP}/dev/usb2/device/net/build/usbnet.fc +in: ${BP}/dev/usb2/device/serial/build/usbserial.fc +in: ${BP}/dev/usb2/device/storage/build/usbstorage.fc +in: ${BP}/dev/usb2/device/keyboard/build/usbkbd.fc +in: ${BP}/dev/pci/build/pcibridg.fc +in: ${BP}/dev/ide/build/leghier.fc + +build-now + +fload ${BP}/cpu/x86/pc/alex/config.fth + +\ Always re-create the builton.fth file when we make a new rom.img +fload ${BP}/cpu/x86/pc/builton.bth + +hex + +.( --- Saving as ofw.elf - Coreboot payload format) cr +fload ${BP}/cpu/x86/pc/elfhdr.fth +writing ofw.elf +elf-header /elf-header ofd @ fputs + + " reset.di" $add-file + " start.di" $add-file + " paging.di" $add-file + + " ${BP}/cpu/x86/build/inflate.bin" " inflate" $add-dropin + + " fw.img" " firmware" $add-deflated-dropin + + " ${BP}/dev/pci/build/pcibridg.fc" " class060400" $add-deflated-dropin + " ${BP}/dev/ide/build/leghier.fc" " class01018a" $add-deflated-dropin + + " ${BP}/dev/usb2/hcd/ehci/build/ehci.fc" " class0c0320" $add-deflated-dropin + " ${BP}/dev/usb2/hcd/uhci/build/uhci.fc" " class0c0300" $add-deflated-dropin + + " ${BP}/dev/usb2/device/hub/build/hub.fc" " usb,class9" $add-dropin + " ${BP}/dev/usb2/device/keyboard/build/usbkbd.fc" " usb,class3,1" $add-dropin + " ${BP}/dev/usb2/device/net/build/usbnet.fc" " usbnet" $add-deflated-dropin + " ${BP}/dev/usb2/device/serial/build/usbserial.fc" " usbserial" $add-deflated-dropin + " ${BP}/dev/usb2/device/storage/build/usbstorage.fc" " usbstorage" $add-deflated-dropin + + " builton.fth" " probe-" $add-dropin + " ${BP}/ofw/fcode/memtest.fth" " memtest.fth" $add-deflated-dropin + " ${BP}/ofw/inet/telnetd.fth" " telnetd" $add-deflated-dropin + " ${BP}/ofw/termemu/15x30pc.psf" " font" $add-deflated-dropin + + ofd @ fsize pad ! \ file size; store in memory for convenience below + h# 44 ofd @ fseek \ Seek to file size field; see elfhdr.bth + pad 4 ofd @ fputs \ Patch file size + pad 4 ofd @ fputs \ Patch memory size +ofd @ fclose Added: cpu/x86/pc/alex/pcinode.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/x86/pc/alex/pcinode.fth Sat Aug 6 00:33:55 2011 (r2422) @@ -0,0 +1,85 @@ +\ See license at end of file +purpose: PCI bus package + +\ XXX need slot-names property +[ifdef] notdef +h# 1000 encode-int " slave-only" property +h# 1800 encode-int \ Mask of implemented add-in slots +" PCI-1" encode-string encode+ +" PCI-2" encode-string encode+ +" PCI-3" encode-string encode+ + +" slot-names" property +[then] + +also forth definitions + +" 0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f,10,11,12,13,14,15,16,17,18,19,1a,1b,1c,1d,1e,1f" + dup config-string pci-probe-list + +previous definitions + +h# 1000.0000 to first-mem \ Avoid RAM at low addresses +h# 2000.0000 to mem-space-top +h# 0000.8000 to first-io \ Avoid mappings established by BIOS + +\ Configuration mechanism #1 as defined in the PCI spec. +: config-setup ( config-adr -- vaddr ) + \ Bit 31 ("enable") must be 1, bits 30:24 ("reserved") must be 0, + \ bits 1:0 must be 0. + dup h# ff.fffc and h# 8000.0000 or h# cf8 pl! ( config-adr ) + + 3 and h# cfc + \ Merge in the byte selector bits +; + +: config-b@ ( config-adr -- b ) config-setup pc@ ; +: config-w@ ( config-adr -- w ) config-setup pw@ ; +: config-l@ ( config-adr -- l ) config-setup pl@ ; +: config-b! ( b config-adr -- ) config-setup pc! ; +: config-w! ( w config-adr -- ) config-setup pw! ; +: config-l! ( l config-adr -- ) config-setup pl! ; + +: init ( -- ) ; + +\ Determine the parent interrupt information (the "interrupt line" in PCI +\ parlance) from the child's "interrupt pin" and the child's address, +\ returning "int-line true" if the child's interrupt line register should +\ be set or "false" otherwise. +: assign-int-line ( phys.hi.func INTx -- irq true ) + \ Reiterate the value that is already in the int line register, + \ which was presumably placed there by the BIOS + drop h# 3c + config-b@ true +; + +\ The io-base handling really ought to be in the root node, but +\ that would require more changes than I'm willing to do at present. +warning @ warning off +: map-out ( vaddr size -- ) + over io-base u>= if 2drop exit then ( vaddr size ) + map-out ( ) +; +warning ! + +\ LICENSE_BEGIN +\ Copyright (c) 2011 FirmWorks +\ +\ Permission is hereby granted, free of charge, to any person obtaining +\ a copy of this software and associated documentation files (the +\ "Software"), to deal in the Software without restriction, including +\ without limitation the rights to use, copy, modify, merge, publish, +\ distribute, sublicense, and/or sell copies of the Software, and to +\ permit persons to whom the Software is furnished to do so, subject to +\ the following conditions: +\ +\ The above copyright notice and this permission notice shall be +\ included in all copies or substantial portions of the Software. +\ +\ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +\ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +\ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +\ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +\ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +\ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +\ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +\ +\ LICENSE_END Added: cpu/x86/pc/alex/probemem.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/x86/pc/alex/probemem.fth Sat Aug 6 00:33:55 2011 (r2422) @@ -0,0 +1,67 @@ +\ See license at end of file +purpose: Create memory node properties and lists + +dev /memory + +: /ram ( -- #bytes ) mem-info-pa la1+ l@ ; + +: release-range ( start-adr end-adr -- ) over - release ; + +: probe ( -- ) + 0 /ram reg \ Report extant memory + + \ Put h# 10.0000-1f.ffff and 28.0000-memsize in pool, + \ reserving 0..10.0000 for the firmware + \ and 20.0000-27.ffff for the "flash" + +\ h# 0.0000 h# 02.0000 release \ A little bit of DMA space, we hope +\ h# 10.0000 h# 0f.ffff release +\ h# 28.0000 h# 80.0000 h# 28.0000 - release + +\ Release some of the first meg, between the page tables and the DOS hole, +\ for use as DMA memory. + mem-info-pa 2 la+ l@ h# a.0000 release-range \ Below DOS hole + +[ifdef] virtual-mode + h# 10.0000 dropin-base over - release + dropin-base dropin-size + mem-info-pa la1+ l@ over - release + +[else] + fw-pa h# 10.0000 u> if + h# 10.0000 fw-pa over - release + fw-pa /fw-ram + heap-base heap-size + umax /ram release + then +[then] +; + +device-end + +also forth definitions +stand-init: Probing memory + " probe" memory-node @ $call-method +; +previous definitions + +\ LICENSE_BEGIN +\ Copyright (c) 2011 FirmWorks +\ +\ Permission is hereby granted, free of charge, to any person obtaining +\ a copy of this software and associated documentation files (the +\ "Software"), to deal in the Software without restriction, including +\ without limitation the rights to use, copy, modify, merge, publish, +\ distribute, sublicense, and/or sell copies of the Software, and to +\ permit persons to whom the Software is furnished to do so, subject to +\ the following conditions: +\ +\ The above copyright notice and this permission notice shall be +\ included in all copies or substantial portions of the Software. +\ +\ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +\ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +\ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +\ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +\ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +\ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +\ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +\ +\ LICENSE_END Added: cpu/x86/pc/alex/reset.bth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/x86/pc/alex/reset.bth Sat Aug 6 00:33:55 2011 (r2422) @@ -0,0 +1,97 @@ +\ See license at end of file +purpose: Dropin dispatcher for i386 + +command: &builder &this +build-now + +fload ${BP}/cpu/x86/pc/alex/config.fth + +\needs start-assembling fload ${BP}/cpu/x86/asmtools.fth +\needs write-dropin fload ${BP}/forth/lib/mkdropin.fth + +fload ${BP}/cpu/x86/mmuparam.fth + +hex + +fload ${BP}/cpu/x86/pc/finddi.fth \ find-dropin and other tools +fload ${BP}/cpu/x86/pc/port80.fth \ Port 80 output + +h# 3e.0000 constant inflate-base +h# 30.0000 constant workspace + +start-assembling + +label my-entry + e9 c, 0 , \ To be patched later +end-code + +[ifdef] debug-startup +fload ${BP}/cpu/x86/pc/dot.fth \ Numeric output +[then] + +fload ${BP}/cpu/x86/pc/ramfind.fth \ find-dropin + +label startup + h# 10 port80 + cli cld + + h# 11 port80 +\ h# 80 h# 70 # isa-c! \ Disable NMI +\ h# 71 # al in \ Why do we do this? + +[ifdef] debug-startup +\ init-com1 + +carret report +linefeed report +ascii F report +ascii o report +ascii r report +[then] + + h# 12 port80 + " start" $find-dropin, \ Assemble call to find-dropin with literal arg + \ What should we do it this fails? Perhaps call a default routine + \ to try to initialize com1 and display a message? + \ For now, we assume success + + d# 32 # ax add \ Skip dropin header + ax call \ Execute the dropin + h# 13 port80 + + fload ${BP}/cpu/x86/pc/resetend.fth +end-code + +also 386-assembler +startup my-entry put-branch +previous + +end-assembling + +writing reset.di +asm-base here over - 0 " reset" write-dropin +ofd @ fclose + +\ LICENSE_BEGIN +\ Copyright (c) 2011 FirmWorks +\ +\ Permission is hereby granted, free of charge, to any person obtaining +\ a copy of this software and associated documentation files (the +\ "Software"), to deal in the Software without restriction, including +\ without limitation the rights to use, copy, modify, merge, publish, +\ distribute, sublicense, and/or sell copies of the Software, and to +\ permit persons to whom the Software is furnished to do so, subject to +\ the following conditions: +\ +\ The above copyright notice and this permission notice shall be +\ included in all copies or substantial portions of the Software. +\ +\ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +\ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +\ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +\ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +\ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +\ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +\ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +\ +\ LICENSE_END Added: cpu/x86/pc/alex/start.bth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/x86/pc/alex/start.bth Sat Aug 6 00:33:55 2011 (r2422) @@ -0,0 +1,67 @@ +\ See license at end of file +purpose: Low-level startup code + +command: &builder &this +build-now + +\needs start-assembling fload ${BP}/cpu/x86/asmtools.fth +\needs write-dropin fload ${BP}/forth/lib/mkdropin.fth + +hex + +fload ${BP}/cpu/x86/pc/alex/config.fth + +fload ${BP}/cpu/x86/pc/report.fth \ Startup reports + +start-assembling + +label my-entry +[ifdef] debug-startup + e9 c, 0 , \ To be patched later +end-code + +fload ${BP}/cpu/x86/pc/dot.fth \ Numeric display +[then] + +label startup +[ifdef] debug-startup +\ ascii x report +[then] + ret +end-code + +[ifdef] debug-startup +also 386-assembler +startup my-entry put-branch +previous +[then] + +end-assembling + +writing start.di +asm-base here over - 0 " start" write-dropin +ofd @ fclose + +\ LICENSE_BEGIN +\ Copyright (c) 2011 FirmWorks +\ +\ Permission is hereby granted, free of charge, to any person obtaining +\ a copy of this software and associated documentation files (the +\ "Software"), to deal in the Software without restriction, including +\ without limitation the rights to use, copy, modify, merge, publish, +\ distribute, sublicense, and/or sell copies of the Software, and to +\ permit persons to whom the Software is furnished to do so, subject to +\ the following conditions: +\ +\ The above copyright notice and this permission notice shall be +\ included in all copies or substantial portions of the Software. +\ +\ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +\ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +\ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +\ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +\ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +\ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +\ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +\ +\ LICENSE_END Added: cpu/x86/pc/alex/usb.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/x86/pc/alex/usb.fth Sat Aug 6 00:33:55 2011 (r2422) @@ -0,0 +1,139 @@ +purpose: Platform-specific USB elaborations +\ See license at end of file + +0 config-int usb-delay \ Milliseconds to wait before set-address + +devalias u /usb/disk + +\ Like $show-devs, but ignores pagination keystrokes +: $nopage-show-devs ( nodename$ -- ) + ['] exit? behavior >r ['] false to exit? + $show-devs + r> to exit? +; + +: (probe-usb2) ( -- ) + " device_type" get-property if exit then +[ifdef] use-usb-debug-port + \ I haven't figured out how to turn on the EHCI cleanly + \ when the Debug Port is running + dbgp-off +[then] + get-encoded-string " ehci" $= if + pwd$ open-dev ?dup if close-dev then + then +; +: (show-usb2) ( -- ) + " device_type" get-property if exit then + get-encoded-string " ehci" $= if + pwd$ $nopage-show-devs + then +; +: (probe-usb1) ( -- ) + " device_type" get-property if exit then + get-encoded-string 2dup " uhci" $= >r " ohci" $= r> or if + pwd$ open-dev ?dup if close-dev then + then +; +: (show-usb1) ( -- ) + " device_type" get-property if exit then + get-encoded-string 2dup " uhci" $= >r " ohci" $= r> or if + pwd$ $nopage-show-devs + then +; + +: silent-probe-usb ( -- ) + " /" ['] (probe-usb2) scan-subtree + " /" ['] (probe-usb1) scan-subtree + report-disk report-net +; +: probe-usb ( -- ) + silent-probe-usb + + ." USB2 devices:" cr + " /" ['] (show-usb2) scan-subtree + + ." USB1 devices:" cr + " /" ['] (show-usb1) scan-subtree +; +alias p2 probe-usb + +0 value usb-keyboard-ih + +: attach-usb-keyboard ( -- ) + " usb-keyboard" expand-alias if ( devspec$ ) + drop " /usb" comp 0= if ( ) + " usb-keyboard" open-dev to usb-keyboard-ih + usb-keyboard-ih add-input + exit + then + else ( devspec$ ) + 2drop + then +; + +: detach-usb-keyboard ( -- ) + usb-keyboard-ih if + usb-keyboard-ih remove-input + usb-keyboard-ih close-dev + 0 to usb-keyboard-ih + then +; + +: ?usb-keyboard ( -- ) + attach-usb-keyboard + " /usb/serial" open-dev ?dup if + add-input + then +; + +\ Unlink every node whose phys.hi component matches port +: port-match? ( port -- flag ) + get-unit if drop false exit then + get-encoded-int = +; +: rm-usb-children ( port -- ) + device-context? 0= if drop exit then + also ( port ) + 'child ( port prev ) + first-child begin while ( port prev ) + over port-match? if ( port prev ) + 'peer link@ over link! ( port prev ) \ Disconnect + else ( port prev ) + drop 'peer ( port prev' ) + then ( port prev ) + next-child repeat ( port prev ) + 2drop ( ) + previous definitions +; + +: usb-quiet ( -- ) + [ ' linux-hook behavior compile, ] \ Chain to old behavior + " usb1" " reset-usb" execute-device-method drop + " usb2" " reset-usb" execute-device-method drop +; +' usb-quiet to linux-hook + +\ LICENSE_BEGIN +\ Copyright (c) 2007 FirmWorks +\ +\ Permission is hereby granted, free of charge, to any person obtaining +\ a copy of this software and associated documentation files (the +\ "Software"), to deal in the Software without restriction, including +\ without limitation the rights to use, copy, modify, merge, publish, +\ distribute, sublicense, and/or sell copies of the Software, and to +\ permit persons to whom the Software is furnished to do so, subject to +\ the following conditions: +\ +\ The above copyright notice and this permission notice shall be +\ included in all copies or substantial portions of the Software. +\ +\ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +\ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +\ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +\ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +\ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +\ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +\ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +\ +\ LICENSE_END

1 0

[commit] r2421 - cpu/x86/pc/alex
by repository service 06 Aug '11

06 Aug '11

Author: wmb Date: Sat Aug 6 00:29:59 2011 New Revision: 2421 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2421 Log: New platform directory for "Alex" ChromeBook. Added: cpu/x86/pc/alex/

1 0

[commit] r2420 - dev/intel/graphics
by repository service 06 Aug '11

06 Aug '11

Author: wmb Date: Sat Aug 6 00:28:47 2011 New Revision: 2420 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2420 Log: Removed carriage returns from line endings in a file. Modified: dev/intel/graphics/pineview.fth Modified: dev/intel/graphics/pineview.fth ============================================================================== --- dev/intel/graphics/pineview.fth Sat Aug 6 00:26:44 2011 (r2419) +++ dev/intel/graphics/pineview.fth Sat Aug 6 00:28:47 2011 (r2420) @@ -1,424 +1,424 @@ -\ See license at end of file -purpose: Display driver for Intel Pineview using 1280x800 LCD panel on LVDS - -\ This is an i915 variant. The driver hardcodes some assumptions about display -\ resolution and output device. - -\ 0 0 " 2,0" " /pci" begin-package - -" display" device-name - -\ Configuration space registers -my-address my-space encode-phys - 0 encode-int encode+ 0 encode-int encode+ - -\ MMIO register bank -0 0 my-space 0200.0010 + encode-phys encode+ - 0 encode-int encode+ h# 80000 encode-int encode+ - -\ I/O Space registers -0 0 my-space h# 0100.0014 + encode-phys encode+ - 0 encode-int encode+ 8 encode-int encode+ - -\ Aperture -0 0 my-space h# 0200.0018 + encode-phys encode+ - 0 encode-int encode+ h# 1000.0000 encode-int encode+ - -\ GATT -0 0 my-space h# 0200.001c + encode-phys encode+ - 0 encode-int encode+ h# 0004.0000 encode-int encode+ - - " reg" property - -: my-l@ ( offset -- l ) my-space + " config-l@" $call-parent ; -: my-l! ( l offset -- ) my-space + " config-l!" $call-parent ; -: my-w@ ( offset -- w ) my-space + " config-w@" $call-parent ; -: my-w! ( w offset -- ) my-space + " config-w!" $call-parent ; - -false value scaled? - -d# 16 value depth - -0 value vdc -: page-bits ( n -- n' ) h# fff invert and ; - -: pci-len ( bar-offset -- len ) - >r - r@ my-l@ ( oldval ) - -1 r@ my-l! ( oldval ) - r@ my-l@ ( oldval writable-bits ) - swap r> my-l! ( writable-bits ) - h# f invert and ( top-bits ) - invert 1+ ( len ) -; - -0 value gtt -0 value gatt - -0 value gtt-phys -0 value gatt-phys -0 value gtt-start -0 value /gtt -0 value /gatt -0 value stolen-base -0 value scratch-page -0 value scratch-page-pa - -h# 20.0000 value /fb \ Enough for 1280x800x16bpp - -: mmio@ ( offset -- l ) vdc + rl@ ; -: mmio! ( l offset -- ) vdc + rl! ; - -: adr>page# ( adr -- page# ) d# 12 rshift ; -: page#>adr ( page# -- adr ) d# 12 lshift ; -h# 1000 constant /page - -: map-bar ( phys.lo len bar# -- vadr ) - swap >r ( phys.lo bar# r: len ) - my-space + h# 200.0000 + ( phys.lo phys.hi r: len ) - 0 swap r> ( phys.lo,mid,hi len ) - " map-in" $call-parent -; - -: /stolen ( -- n ) - h# 52 my-w@ 4 >> h# f and case - 0 of 0 endof - 1 of h# 10.0000 endof - 3 of h# 80.0000 endof - true abort" Invalid value in Graphics Mode Select field" - endcase -; -: init-gtt ( -- ) - h# 18 my-l@ page-bits to gatt-phys - h# 1c my-l@ page-bits to gtt-start - h# 1c pci-len to /gtt \ Can also be determined from config register 52 - h# 18 pci-len to /gatt - h# 5c my-l@ to stolen-base - - h# 0 /gtt h# 1c map-bar to gtt - - \ Insert the stolen pages into the GTT - stolen-base 1 + ( pte-template ) - /stolen 0 do ( pte-template ) - dup i + gtt i adr>page# la+ rl! ( pte-template ) - /page +loop ( pte-template ) - drop - - \ Fill the rest of the GTT with PTEs for a scratch page - /page " dma-alloc" $call-parent to scratch-page - scratch-page h# 1000 false " dma-map-in" $call-parent to scratch-page-pa - - /gatt /stolen ?do - scratch-page-pa 1+ gtt i adr>page# la+ rl! - /page +loop - - gtt /gtt + /page - rl@ drop \ Sync -; -: memory-setup ( -- ) - h# 0 h# 80000 h# 10 map-bar to vdc \ & - 4 my-w@ 7 or 4 my-w! \ Enable bus mastering, memory and I/O access - - init-gtt - - " address" get-my-property if - gatt-phys encode-int " address" property - h# 0 /fb h# 18 map-bar to frame-buffer-adr - else - decode-int to frame-buffer-adr - 2drop - then -; - -\ Geometry for 1280x800 LCD - -d# 1280 constant hdisplay -d# 1296 constant hsstart -d# 1344 constant hsend -d# 1440 constant htotal - -d# 800 constant vdisplay -d# 801 constant vsstart -d# 804 constant vsend -d# 818 constant vtotal - -d# 1024 value width \ If scaled is false, will be replaced with hdisplay -d# 768 value height \ If scaled is false, will be replaced with vdisplay - -\ h# d804.0000 constant dpll-val \ VCO, high speed, VGA disable, LVDS, clock div 10, post div 4 -h# 8480.0000 constant dpll-val-a \ Pipe A & -h# 9802.0000 constant dpll-val-b \ Pipe B & -dpll-val-b constant dpll-val - -h# 0020.0074 constant fp-val \ N, M1, M2 divisors & -h# 9500.0000 constant dspcntr-val \ Enable, NoGamma, 16bpp ? no alpha, pipe b & - -\ Empirically this has no effect. It is probably for CRT output -\ : dac-on ( -- ) -\ h# c000.0018 h# 61100 mmio! \ 80000000-DAC_ON 40000000-PIPEB 10-PVSYNC 8-PHSYNC -\ ; - -: bytes/line ( -- n ) width depth 8 / * ; - -h# 0000 constant pipe-a -h# 1000 constant pipe-b -pipe-b value pipe - -: mmio!! ( value offset -- ) tuck mmio! mmio@ drop ; - -: pipe@ ( offset -- n ) pipe + mmio@ ; -: pipe! ( n offset -- ) pipe + mmio! ; -: pipe!! ( n offset -- ) pipe + mmio!! ; - -h# 70180 constant dspcntr-reg -h# 70184 constant dspbase-reg -h# 70008 constant pipeconf-reg -h# 61230 constant pfit-reg -h# 61180 constant lvds-reg - -\ Packs two 16-bit values into a 32-bit register, offsetting -\ each value by -1 -: crtconf! ( low high reg -- ) - >r swap 1- swap 1- wljoin r> pipe! -; - -\ A few of the pipe-dependent registers are at offsets of 4 -\ instead of h# 1000. - -: +pipe ( offset -- offset' ) pipe if 4 + then ; - -: fpreg! ( value -- ) h# 6040 +pipe mmio! ; - -: dpll! ( value -- ) - h# 6014 +pipe mmio!! - d# 150 " us" evaluate -; -: dpll@ ( -- value ) h# 6014 +pipe mmio@ ; -: wait-vblank ( -- ) d# 30 ms ; - -h# 8000.0000 constant enable-bit - -: load-lut ( -- ) - 100 0 do - i i i 0 bljoin h# a000 pipe 2/ + i la+ l! - loop -; - -: crtc-dpms-off ( -- ) \ CRTC prepare method - \ Disable display plane - dspcntr-reg pipe@ ( val ) - dup enable-bit and if ( val ) - enable-bit invert and dspcntr-reg pipe! - dspbase-reg pipe@ dspbase-reg pipe!! - else - drop - then - wait-vblank - - \ Disable display pipes - pipeconf-reg pipe@ ( val ) - dup enable-bit and if ( val ) - enable-bit invert and pipeconf-reg pipe!! - else - drop - then - wait-vblank - - dpll@ dup enable-bit and if - enable-bit invert and dpll! - else - drop - then -; - -: crtc-dpms-on ( -- ) \ CRTC commit method - dpll@ dup enable-bit and 0= if ( value ) - dup dpll! ( value ) - enable-bit or dup dpll! dpll! ( ) - else ( value ) - drop ( ) - then - - pipeconf-reg pipe@ dup enable-bit and 0= if - enable-bit or pipeconf-reg pipe! - else - drop - then - - dspcntr-reg pipe@ dup enable-bit and if - enable-bit or dspcntr-reg pipe! - dspbase-reg pipe@ dspbase-reg pipe! - else - drop - then - - load-lut -; - -: lvds-set-mode ( -- ) - \ When using LVDS, you have to do this little dance to turn on the PLL - - fp-val fpreg! - dpll-val enable-bit invert and dpll! \ VCO_ENABLE off for now - - lvds-reg mmio@ \ LVDS configuration - h# c030.0300 or \ LVDS_PORT_EN , LVDS_PIPEB_SELECT , LVDS_A0A2_CLKA_POWER_UP ?? what is 30.0000 bit - h# 0000.003c invert and \ ! LVDS_CLKB_POWER_UP , ! LVDS_B0B3_POWER_UP - lvds-reg mmio!! - - fp-val fpreg! - dpll-val dpll! \ VCO_ENABLE on - - \ Double write because Linux driver does it because BIOS does it - dpll-val dpll! \ VCO_ENABLE on - - \ Now that the dance is over we can configure the geometry - - hdisplay htotal h# 60000 crtconf! \ H Display - hdisplay htotal h# 60004 crtconf! \ H Blanking - hsstart hsend h# 60008 crtconf! \ H Sync - vdisplay vtotal h# 6000c crtconf! \ V Display - vdisplay vtotal h# 60010 crtconf! \ V Blanking - vsstart vsend h# 60014 crtconf! \ V Sync - - bytes/line h# 70188 pipe! \ Pitch (stride) - width height h# 70190 crtconf! \ Size - 0 h# 7018c pipe! \ Position - height width h# 6001c crtconf! \ Pipe source - enable-bit pipeconf-reg pipe!! \ Pipe config - - wait-vblank - - dspcntr-val dspcntr-reg pipe! \ Display control - - 0 dspbase-reg pipe! \ PIPExBASE - - enable-bit h# 71400 mmio! \ Disable VGA plane - - wait-vblank -; - -d# 100 constant backlight-min-period -false value backlight-inverse? -: set-backlight ( percentage -- ) - h# 61254 mmio@ lwsplit nip ( percent max ) - backlight-min-period max ( percent max' ) - 1 invert and >r ( percent r: max' ) - - d# 20 max ( percentage' r: max ) - r@ * d# 100 / ( duty-cycle r: max ) - - backlight-inverse? if ( duty-cycle r: max ) - r@ swap - ( duty-cycle' ) - then ( duty-cycle r: max ) - - 1 invert and ( duty-cycle r: max ) \ Low bit must be 0 - r> wljoin h# 61254 mmio! ( ) \ BLC_PWM_CTL -; - -d# 100 value backlight-val - -h# 61200 constant pp-status -h# 61204 constant pp-control -: lvds-on ( -- ) - pp-control mmio@ 1 or pp-control mmio! \ POWER_TARGET_ON - begin pp-status mmio@ enable-bit and until - backlight-val set-backlight -; -: lvds-off ( -- ) - 0 set-backlight - pp-control mmio@ 1 invert and pp-control mmio! - begin pp-status mmio@ enable-bit and 0= until -; - -: .ps pp-status mmio@ . ; -: pctl pp-control mmio! ; - -: lvds-scaling ( -- ) - scaled? if h# 8000.2668 else 0 then - pfit-reg mmio! -\ pipe h# 1000 / d# 29 lshift pfit-reg mmio! -; -: setmode ( -- ) - scaled? if d# 1024 d# 768 else hdisplay vdisplay then - to height to width - memory-setup - lvds-off \ Output prepare method - crtc-dpms-off \ CRTC prepare method - lvds-set-mode \ CRTC mode_set method - lvds-scaling \ Output mode_set method - crtc-dpms-on \ CRTC commit method - lvds-on \ Output commit method -; - -: erase-frame-buffer ( -- ) - frame-buffer-adr /fb ( adr len ) - depth case - 8 of h# 0f fill endof - d# 16 of h# ffff " wfill" evaluate endof - d# 32 of h# ffff.ffff " lfill" evaluate endof - ( default ) nip nip - endcase - h# f to background-color -; -: map-frame-buffer ( -- ) - 0 /fb h# 18 map-bar to frame-buffer-adr -; -: dump-regs ( -- ) - h# 80000 0 do - i mmio@ dup 0<> swap h# ffffffff <> and if - i 5 u.r i mmio@ 9 u.r cr - then - 4 +loop -; - -: declare-props ( -- ) \ Instantiate screen properties - " width" get-my-property if - width encode-int " width" property - height encode-int " height" property - depth encode-int " depth" property - bytes/line encode-int " linebytes" property - else - 2drop - then -; - -defer gp-install ' noop to gp-install - -: set-terminal ( -- ) - width height ( width height ) - over char-width / over char-height / ( width height rows cols ) - bytes/line depth " fb-install" evaluate gp-install ( ) -; - - -0 value open-count - -: display-remove ( -- ) - open-count 1 = if - then - open-count 1- 0 max to open-count -; - -: display-install ( -- ) - open-count 0= if - setmode - declare-props \ Setup properites - map-frame-buffer - erase-frame-buffer - else - map-frame-buffer - then - default-font set-font - set-terminal - open-count 1+ to open-count -; - -: display-selftest ( -- failed? ) false ; - -' display-install is-install -' display-remove is-remove -' display-selftest is-selftest - -" display" device-type -" ISO8859-1" encode-string " character-set" property -0 0 encode-bytes " iso6429-1983-colors" property +\ See license at end of file +purpose: Display driver for Intel Pineview using 1280x800 LCD panel on LVDS + +\ This is an i915 variant. The driver hardcodes some assumptions about display +\ resolution and output device. + +\ 0 0 " 2,0" " /pci" begin-package + +" display" device-name + +\ Configuration space registers +my-address my-space encode-phys + 0 encode-int encode+ 0 encode-int encode+ + +\ MMIO register bank +0 0 my-space 0200.0010 + encode-phys encode+ + 0 encode-int encode+ h# 80000 encode-int encode+ + +\ I/O Space registers +0 0 my-space h# 0100.0014 + encode-phys encode+ + 0 encode-int encode+ 8 encode-int encode+ + +\ Aperture +0 0 my-space h# 0200.0018 + encode-phys encode+ + 0 encode-int encode+ h# 1000.0000 encode-int encode+ + +\ GATT +0 0 my-space h# 0200.001c + encode-phys encode+ + 0 encode-int encode+ h# 0004.0000 encode-int encode+ + + " reg" property + +: my-l@ ( offset -- l ) my-space + " config-l@" $call-parent ; +: my-l! ( l offset -- ) my-space + " config-l!" $call-parent ; +: my-w@ ( offset -- w ) my-space + " config-w@" $call-parent ; +: my-w! ( w offset -- ) my-space + " config-w!" $call-parent ; + +false value scaled? + +d# 16 value depth + +0 value vdc +: page-bits ( n -- n' ) h# fff invert and ; + +: pci-len ( bar-offset -- len ) + >r + r@ my-l@ ( oldval ) + -1 r@ my-l! ( oldval ) + r@ my-l@ ( oldval writable-bits ) + swap r> my-l! ( writable-bits ) + h# f invert and ( top-bits ) + invert 1+ ( len ) +; + +0 value gtt +0 value gatt + +0 value gtt-phys +0 value gatt-phys +0 value gtt-start +0 value /gtt +0 value /gatt +0 value stolen-base +0 value scratch-page +0 value scratch-page-pa + +h# 20.0000 value /fb \ Enough for 1280x800x16bpp + +: mmio@ ( offset -- l ) vdc + rl@ ; +: mmio! ( l offset -- ) vdc + rl! ; + +: adr>page# ( adr -- page# ) d# 12 rshift ; +: page#>adr ( page# -- adr ) d# 12 lshift ; +h# 1000 constant /page + +: map-bar ( phys.lo len bar# -- vadr ) + swap >r ( phys.lo bar# r: len ) + my-space + h# 200.0000 + ( phys.lo phys.hi r: len ) + 0 swap r> ( phys.lo,mid,hi len ) + " map-in" $call-parent +; + +: /stolen ( -- n ) + h# 52 my-w@ 4 >> h# f and case + 0 of 0 endof + 1 of h# 10.0000 endof + 3 of h# 80.0000 endof + true abort" Invalid value in Graphics Mode Select field" + endcase +; +: init-gtt ( -- ) + h# 18 my-l@ page-bits to gatt-phys + h# 1c my-l@ page-bits to gtt-start + h# 1c pci-len to /gtt \ Can also be determined from config register 52 + h# 18 pci-len to /gatt + h# 5c my-l@ to stolen-base + + h# 0 /gtt h# 1c map-bar to gtt + + \ Insert the stolen pages into the GTT + stolen-base 1 + ( pte-template ) + /stolen 0 do ( pte-template ) + dup i + gtt i adr>page# la+ rl! ( pte-template ) + /page +loop ( pte-template ) + drop + + \ Fill the rest of the GTT with PTEs for a scratch page + /page " dma-alloc" $call-parent to scratch-page + scratch-page h# 1000 false " dma-map-in" $call-parent to scratch-page-pa + + /gatt /stolen ?do + scratch-page-pa 1+ gtt i adr>page# la+ rl! + /page +loop + + gtt /gtt + /page - rl@ drop \ Sync +; +: memory-setup ( -- ) + h# 0 h# 80000 h# 10 map-bar to vdc \ & + 4 my-w@ 7 or 4 my-w! \ Enable bus mastering, memory and I/O access + + init-gtt + + " address" get-my-property if + gatt-phys encode-int " address" property + h# 0 /fb h# 18 map-bar to frame-buffer-adr + else + decode-int to frame-buffer-adr + 2drop + then +; + +\ Geometry for 1280x800 LCD + +d# 1280 constant hdisplay +d# 1296 constant hsstart +d# 1344 constant hsend +d# 1440 constant htotal + +d# 800 constant vdisplay +d# 801 constant vsstart +d# 804 constant vsend +d# 818 constant vtotal + +d# 1024 value width \ If scaled is false, will be replaced with hdisplay +d# 768 value height \ If scaled is false, will be replaced with vdisplay + +\ h# d804.0000 constant dpll-val \ VCO, high speed, VGA disable, LVDS, clock div 10, post div 4 +h# 8480.0000 constant dpll-val-a \ Pipe A & +h# 9802.0000 constant dpll-val-b \ Pipe B & +dpll-val-b constant dpll-val + +h# 0020.0074 constant fp-val \ N, M1, M2 divisors & +h# 9500.0000 constant dspcntr-val \ Enable, NoGamma, 16bpp ? no alpha, pipe b & + +\ Empirically this has no effect. It is probably for CRT output +\ : dac-on ( -- ) +\ h# c000.0018 h# 61100 mmio! \ 80000000-DAC_ON 40000000-PIPEB 10-PVSYNC 8-PHSYNC +\ ; + +: bytes/line ( -- n ) width depth 8 / * ; + +h# 0000 constant pipe-a +h# 1000 constant pipe-b +pipe-b value pipe + +: mmio!! ( value offset -- ) tuck mmio! mmio@ drop ; + +: pipe@ ( offset -- n ) pipe + mmio@ ; +: pipe! ( n offset -- ) pipe + mmio! ; +: pipe!! ( n offset -- ) pipe + mmio!! ; + +h# 70180 constant dspcntr-reg +h# 70184 constant dspbase-reg +h# 70008 constant pipeconf-reg +h# 61230 constant pfit-reg +h# 61180 constant lvds-reg + +\ Packs two 16-bit values into a 32-bit register, offsetting +\ each value by -1 +: crtconf! ( low high reg -- ) + >r swap 1- swap 1- wljoin r> pipe! +; + +\ A few of the pipe-dependent registers are at offsets of 4 +\ instead of h# 1000. + +: +pipe ( offset -- offset' ) pipe if 4 + then ; + +: fpreg! ( value -- ) h# 6040 +pipe mmio! ; + +: dpll! ( value -- ) + h# 6014 +pipe mmio!! + d# 150 " us" evaluate +; +: dpll@ ( -- value ) h# 6014 +pipe mmio@ ; +: wait-vblank ( -- ) d# 30 ms ; + +h# 8000.0000 constant enable-bit + +: load-lut ( -- ) + 100 0 do + i i i 0 bljoin h# a000 pipe 2/ + i la+ l! + loop +; + +: crtc-dpms-off ( -- ) \ CRTC prepare method + \ Disable display plane + dspcntr-reg pipe@ ( val ) + dup enable-bit and if ( val ) + enable-bit invert and dspcntr-reg pipe! + dspbase-reg pipe@ dspbase-reg pipe!! + else + drop + then + wait-vblank + + \ Disable display pipes + pipeconf-reg pipe@ ( val ) + dup enable-bit and if ( val ) + enable-bit invert and pipeconf-reg pipe!! + else + drop + then + wait-vblank + + dpll@ dup enable-bit and if + enable-bit invert and dpll! + else + drop + then +; + +: crtc-dpms-on ( -- ) \ CRTC commit method + dpll@ dup enable-bit and 0= if ( value ) + dup dpll! ( value ) + enable-bit or dup dpll! dpll! ( ) + else ( value ) + drop ( ) + then + + pipeconf-reg pipe@ dup enable-bit and 0= if + enable-bit or pipeconf-reg pipe! + else + drop + then + + dspcntr-reg pipe@ dup enable-bit and if + enable-bit or dspcntr-reg pipe! + dspbase-reg pipe@ dspbase-reg pipe! + else + drop + then + + load-lut +; + +: lvds-set-mode ( -- ) + \ When using LVDS, you have to do this little dance to turn on the PLL + + fp-val fpreg! + dpll-val enable-bit invert and dpll! \ VCO_ENABLE off for now + + lvds-reg mmio@ \ LVDS configuration + h# c030.0300 or \ LVDS_PORT_EN , LVDS_PIPEB_SELECT , LVDS_A0A2_CLKA_POWER_UP ?? what is 30.0000 bit + h# 0000.003c invert and \ ! LVDS_CLKB_POWER_UP , ! LVDS_B0B3_POWER_UP + lvds-reg mmio!! + + fp-val fpreg! + dpll-val dpll! \ VCO_ENABLE on + + \ Double write because Linux driver does it because BIOS does it + dpll-val dpll! \ VCO_ENABLE on + + \ Now that the dance is over we can configure the geometry + + hdisplay htotal h# 60000 crtconf! \ H Display + hdisplay htotal h# 60004 crtconf! \ H Blanking + hsstart hsend h# 60008 crtconf! \ H Sync + vdisplay vtotal h# 6000c crtconf! \ V Display + vdisplay vtotal h# 60010 crtconf! \ V Blanking + vsstart vsend h# 60014 crtconf! \ V Sync + + bytes/line h# 70188 pipe! \ Pitch (stride) + width height h# 70190 crtconf! \ Size + 0 h# 7018c pipe! \ Position + height width h# 6001c crtconf! \ Pipe source + enable-bit pipeconf-reg pipe!! \ Pipe config + + wait-vblank + + dspcntr-val dspcntr-reg pipe! \ Display control + + 0 dspbase-reg pipe! \ PIPExBASE + + enable-bit h# 71400 mmio! \ Disable VGA plane + + wait-vblank +; + +d# 100 constant backlight-min-period +false value backlight-inverse? +: set-backlight ( percentage -- ) + h# 61254 mmio@ lwsplit nip ( percent max ) + backlight-min-period max ( percent max' ) + 1 invert and >r ( percent r: max' ) + + d# 20 max ( percentage' r: max ) + r@ * d# 100 / ( duty-cycle r: max ) + + backlight-inverse? if ( duty-cycle r: max ) + r@ swap - ( duty-cycle' ) + then ( duty-cycle r: max ) + + 1 invert and ( duty-cycle r: max ) \ Low bit must be 0 + r> wljoin h# 61254 mmio! ( ) \ BLC_PWM_CTL +; + +d# 100 value backlight-val + +h# 61200 constant pp-status +h# 61204 constant pp-control +: lvds-on ( -- ) + pp-control mmio@ 1 or pp-control mmio! \ POWER_TARGET_ON + begin pp-status mmio@ enable-bit and until + backlight-val set-backlight +; +: lvds-off ( -- ) + 0 set-backlight + pp-control mmio@ 1 invert and pp-control mmio! + begin pp-status mmio@ enable-bit and 0= until +; + +: .ps pp-status mmio@ . ; +: pctl pp-control mmio! ; + +: lvds-scaling ( -- ) + scaled? if h# 8000.2668 else 0 then + pfit-reg mmio! +\ pipe h# 1000 / d# 29 lshift pfit-reg mmio! +; +: setmode ( -- ) + scaled? if d# 1024 d# 768 else hdisplay vdisplay then + to height to width + memory-setup + lvds-off \ Output prepare method + crtc-dpms-off \ CRTC prepare method + lvds-set-mode \ CRTC mode_set method + lvds-scaling \ Output mode_set method + crtc-dpms-on \ CRTC commit method + lvds-on \ Output commit method +; + +: erase-frame-buffer ( -- ) + frame-buffer-adr /fb ( adr len ) + depth case + 8 of h# 0f fill endof + d# 16 of h# ffff " wfill" evaluate endof + d# 32 of h# ffff.ffff " lfill" evaluate endof + ( default ) nip nip + endcase + h# f to background-color +; +: map-frame-buffer ( -- ) + 0 /fb h# 18 map-bar to frame-buffer-adr +; +: dump-regs ( -- ) + h# 80000 0 do + i mmio@ dup 0<> swap h# ffffffff <> and if + i 5 u.r i mmio@ 9 u.r cr + then + 4 +loop +; + +: declare-props ( -- ) \ Instantiate screen properties + " width" get-my-property if + width encode-int " width" property + height encode-int " height" property + depth encode-int " depth" property + bytes/line encode-int " linebytes" property + else + 2drop + then +; + +defer gp-install ' noop to gp-install + +: set-terminal ( -- ) + width height ( width height ) + over char-width / over char-height / ( width height rows cols ) + bytes/line depth " fb-install" evaluate gp-install ( ) +; + + +0 value open-count + +: display-remove ( -- ) + open-count 1 = if + then + open-count 1- 0 max to open-count +; + +: display-install ( -- ) + open-count 0= if + setmode + declare-props \ Setup properites + map-frame-buffer + erase-frame-buffer + else + map-frame-buffer + then + default-font set-font + set-terminal + open-count 1+ to open-count +; + +: display-selftest ( -- failed? ) false ; + +' display-install is-install +' display-remove is-remove +' display-selftest is-selftest + +" display" device-type +" ISO8859-1" encode-string " character-set" property +0 0 encode-bytes " iso6429-1983-colors" property

1 0

[commit] r2419 - dev/intel/graphics
by repository service 06 Aug '11

06 Aug '11

Author: wmb Date: Sat Aug 6 00:26:44 2011 New Revision: 2419 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2419 Log: Fixed backlight control for Intel Pineview display driver. Modified: dev/intel/graphics/pineview.fth Modified: dev/intel/graphics/pineview.fth ============================================================================== --- dev/intel/graphics/pineview.fth Sat Aug 6 00:25:44 2011 (r2418) +++ dev/intel/graphics/pineview.fth Sat Aug 6 00:26:44 2011 (r2419) @@ -297,15 +297,20 @@ wait-vblank ; +d# 100 constant backlight-min-period false value backlight-inverse? : set-backlight ( percentage -- ) h# 61254 mmio@ lwsplit nip ( percent max ) + backlight-min-period max ( percent max' ) 1 invert and >r ( percent r: max' ) + d# 20 max ( percentage' r: max ) r@ * d# 100 / ( duty-cycle r: max ) + backlight-inverse? if ( duty-cycle r: max ) r@ swap - ( duty-cycle' ) then ( duty-cycle r: max ) + 1 invert and ( duty-cycle r: max ) \ Low bit must be 0 r> wljoin h# 61254 mmio! ( ) \ BLC_PWM_CTL ;

1 0

[commit] r2418 - ofw/disklabel
by repository service 06 Aug '11

06 Aug '11

Author: wmb Date: Sat Aug 6 00:25:44 2011 New Revision: 2418 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2418 Log: Additional file checkin for GUID Partition Table support. Modified: ofw/disklabel/common.fth Modified: ofw/disklabel/common.fth ============================================================================== --- ofw/disklabel/common.fth Sat Aug 6 00:24:56 2011 (r2417) +++ ofw/disklabel/common.fth Sat Aug 6 00:25:44 2011 (r2418) @@ -8,8 +8,10 @@ h# 83 constant ext2fs-type h# a5 constant ufs-type h# 96 constant iso-type +h# ee constant gpt-type 0 value ufs-partition +0 0 instance 2value partition-name$ 0 instance value #part 0 instance value /sector \ Set in open by calling parent's block-size method

1 0

[commit] r2417 - ofw/fs
by repository service 06 Aug '11

06 Aug '11

Author: wmb Date: Sat Aug 6 00:24:56 2011 New Revision: 2417 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2417 Log: Added coreboot filesystem support package. Added: ofw/fs/cbfs.fth Added: ofw/fs/cbfs.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ ofw/fs/cbfs.fth Sat Aug 6 00:24:56 2011 (r2417) @@ -0,0 +1,249 @@ +purpose: Coreboot filesystem ("CBFS") package +\ See license at end of file + +h# ffc0.0000 value flash-base +: .cbfs-type ( type -- ) + case + h# 10 of ." stage" endof + h# 20 of ." payload" endof + h# 30 of ." optionrom" endof + h# 40 of ." bootsplash" endof + h# 50 of ." raw" endof + h# 51 of ." vsa" endof + h# 52 of ." mbi" endof + h# 53 of ." microcode" endof + h# aa of ." cmos_default" endof + h# 1aa of ." cmos_layout" endof + -1 of ." unused" endof + ( default ) dup push-hex d# 12 u.r pop-base + endcase +; +\ 0,1 magic 2 length 3 type 4 checksum 5 offset 6+ name\0 +: .cbfs ( -- ) + ." Address Length Type Name" cr + flash-base + begin dup be-l@ h# 4c415243 = while ( adr ) + push-hex ( adr ) + dup dup 5 la+ be-l@ + 8 u.r space ( adr ) + dup 2 la+ be-l@ 8 u.r space ( adr ) + pop-base ( adr ) + dup 3 la+ be-l@ .cbfs-type space ( adr ) + dup 6 la+ cscount type cr ( adr ) + dup 2 la+ be-l@ ( adr len ) + over 5 la+ be-l@ ( adr len offset ) + + + h# 40 round-up ( adr' ) + repeat ( adr ) + drop +; + +support-package: cbfs-file-system + +headerless +0 instance value image-size +0 value open-count +0 instance value seek-ptr +0 instance value offset + +: clip-size ( adr len -- adr len' ) + seek-ptr + image-size umin seek-ptr - +; +: update-ptr ( len' -- len' ) dup seek-ptr + to seek-ptr ; + +d# 255 instance buffer: pathbuf +: fix-delims ( adr len -- adr' len' ) + pathbuf pack count 2dup + bounds ?do ( adr len ) + i c@ dup [char] | = swap [char] \ = or if [char] / i c! then + loop +; + +headers +external +: seek ( d.offset -- status ) + 0<> over image-size u> or if drop true exit then \ Seek offset too big + to seek-ptr + seek-ptr offset + 0 " seek" $call-parent +; +: size ( -- d.size ) image-size u>d ; +: read ( adr len -- actual ) + clip-size ( adr len' ) + " read" $call-parent ( len' ) + update-ptr ( len' ) +; + +headers +d# 24 d# 64 + instance buffer: cbfs-hdr \ should be large enough + +d# 64 instance buffer: saved-name + +: cbfield \ name ( offset -- adr ) + create over , + does> @ cbfs-hdr + +; + +struct + 8 cbfield cb-magic \ 4c415243 48495645 + /l cbfield cb-length \ Data length in bytes + /l cbfield cb-type \ Image type + /l cbfield cb-sum \ Checksum + /l cbfield cb-offset \ Offset to data + 0 cbfield cb-name \ Name +constant /cb-hdr \ Size of header excluding name + +: cbfs-name$ ( -- adr len ) cb-name cscount ; + +\ ID of the header that's currently in the buffer +-1 instance value header-id + +external +: load ( adr -- len ) + 0. seek drop ( adr ) + image-size read ( len ) + \ XXX should verify the checksum +; + +headers +: file-header? ( id -- id flag ) + -1 to header-id ( id ) + dup u>d seek drop ( id ) + cb-magic 8 read drop ( id ) + cb-magic " "(4c41524348495645)" comp 0= ( id adr ) +; +: read-file-header ( -- ) + cb-length h# 10 read drop ( id ) + cb-name cb-offset be-l@ h# 18 - read drop ( id ) +; +: get-file-header? ( id' -- id flag ) + dup header-id = if true exit then ( id ) + file-header? if ( id ) + dup to header-id ( id ) + read-file-header ( id ) + true ( id true ) + else ( id ) + false ( false ) + then ( id ) +; + +: +file ( id -- id' ) + cb-length be-l@ + ( id' ) + cb-offset be-l@ + ( id' ) + h# 40 round-up ( id' ) +; + +: first-file-header ( -- false | id true ) + d# 2000 0 do + i get-file-header? if +file true unloop exit else drop then ( ) + loop + 0 +; + +: another-file? ( id -- false | id' true ) + ?dup if ( id ) \ Not the first call + get-file-header? 0= if ( ) + false exit + then ( id ) \ Get the old header into the buffer + +file ( id' ) \ Skip the old header + get-file-header? ( false | id true ) \ Get the new header + else ( ) + first-file-header ( false | id' true ) + then ( false | id' true ) +; + +\ When found, cbfs-hdr contains the file header +: find-file ( name$ -- found? ) + 0 ( name$ id ) + begin another-file? while ( name$ id ) + 2 pick 2 pick ( name$ id name$ ) + cbfs-name$ $= if ( name$ id ) + 3drop true ( true ) + exit + then ( name$ id ) + repeat ( name$ ) + 2drop false ( false ) +; + +\ Called after find-file has located the file header. +\ Adjusts offset and image-size so subsequent seeks and reads +\ apply only to that file's data. +: select-file-data ( -- okay? ) + header-id cb-offset be-l@ + to offset ( ) + cb-length be-l@ to image-size ( ) + 0. seek drop ( ) + true ( true ) +; + +: resolve-path + find-file if ( ) + select-file-data ( flag ) + else ( ) + false ( false ) + then ( flag ) +; + +external +: open ( -- flag ) + -1 to image-size 0 to offset + my-args fix-delims 2dup " /" $= if ( adr len ) + 2drop ( ) + true exit ( true ) + else ( adr len ) + over c@ [char] / = if 1 /string then ( adr' len' ) + resolve-path ( flag ) + exit ( flag ) + then ( adr len ) + 2drop false ( false ) +; +: close ( -- ) ; + +: next-file-info ( id -- false | id' s m h d m y len attributes name$ true ) + begin another-file? while ( id' ) + cb-type be-l@ h# ffffffff <> if ( id ) + " built-time-int" $find if ( id s m h xt ) + execute ( id s m h packed-date ) + d# 100 /mod d# 100 /mod ( id s m h d m y ) + else ( id s m h adr len ) + 2drop 0 0 0 ( id s m h d m y ) + then ( id s m h d m y ) + " built-date-int" $find if ( id s m h xt ) + execute ( id s m h packed-date ) + d# 100 /mod d# 100 /mod ( id s m h d m y ) + else ( id s m h adr len ) + 2drop 0 0 0 ( id s m h d m y ) + then ( id s m h d m y ) + cb-length be-l@ ( id s m h d m y size ) + o# 555 h# 8000 or \ Ordinary,r-x ( id s m h d m y size attributes ) + cbfs-name$ saved-name $save ( id s m h d m y size attr name$ ) + true ( id s m h d m y size attr name$ true ) + exit + then ( id ) + repeat ( id ) + drop ( ) + false ( false ) +; + +: free-bytes ( -- d.#bytes ) 0. ; + +end-support-package + +\ LICENSE_BEGIN +\ Copyright (c) 2011 FirmWorks +\ +\ Permission is hereby granted, free of charge, to any person obtaining +\ a copy of this software and associated documentation files (the +\ "Software"), to deal in the Software without restriction, including +\ without limitation the rights to use, copy, modify, merge, publish, +\ distribute, sublicense, and/or sell copies of the Software, and to +\ permit persons to whom the Software is furnished to do so, subject to +\ the following conditions: +\ +\ The above copyright notice and this permission notice shall be +\ included in all copies or substantial portions of the Software. +\ +\ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +\ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +\ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +\ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +\ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +\ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +\ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +\ +\ LICENSE_END

1 0

[commit] r2416 - cpu/arm cpu/x86 ofw/disklabel ofw/fs/fatfs
by repository service 06 Aug '11

06 Aug '11

Author: wmb Date: Sat Aug 6 00:23:50 2011 New Revision: 2416 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2416 Log: Added GIUD Partition Table support. Added: ofw/disklabel/gpt.fth ofw/disklabel/gpttools.fth ofw/disklabel/showgpt.fth Modified: cpu/arm/basefw.bth cpu/x86/basefw.bth ofw/disklabel/loadpkg.fth ofw/disklabel/methods.fth ofw/fs/fatfs/fdisk2.fth ofw/fs/fatfs/partition.fth Modified: cpu/arm/basefw.bth ============================================================================== --- cpu/arm/basefw.bth Fri Aug 5 03:16:10 2011 (r2415) +++ cpu/arm/basefw.bth Sat Aug 6 00:23:50 2011 (r2416) @@ -66,12 +66,12 @@ fload ${BP}/ofw/fs/cdfs/loadpkg.fth \ ISO 9660 CD-ROM file system reader end-support-package +fload ${BP}/ofw/disklabel/gpttools.fth + support-package: disk-label fload ${BP}/ofw/disklabel/loadpkg.fth \ Disk label package end-support-package -[then] -[ifdef] resident-packages fload ${BP}/ofw/fs/fatfs/fdisk2.fth \ Partition map administration [else] autoload: fdisk2.fth Modified: cpu/x86/basefw.bth ============================================================================== --- cpu/x86/basefw.bth Fri Aug 5 03:16:10 2011 (r2415) +++ cpu/x86/basefw.bth Sat Aug 6 00:23:50 2011 (r2416) @@ -105,6 +105,8 @@ end-support-package [then] +fload ${BP}/ofw/disklabel/gpttools.fth + support-package: disk-label fload ${BP}/ofw/disklabel/loadpkg.fth \ Disk label package end-support-package Added: ofw/disklabel/gpt.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ ofw/disklabel/gpt.fth Sat Aug 6 00:23:50 2011 (r2416) @@ -0,0 +1,74 @@ +: gpt? ( -- flag ) + sector-buf h# 1fe + le-w@ h# aa55 <> if false exit then + sector-buf h# 1c2 + c@ gpt-type = +; + +\ Tasks: +\ Choose a partition based on part# and partition-name$ +\ Set sector-offset, size-low, size-high, and partition-type + +-1 value the-sector +: get-gpt-info ( -- error? ) + 1 read-hw-sector ( ) + sector-buf gpt-magic comp if true exit then + \ XXX should verify CRC + sector-buf d# 72 + le-x@ to partition-lba0 + sector-buf d# 80 + le-l@ to #gpt-partitions + sector-buf d# 84 + le-l@ to /gpt-entry + -1 to the-sector + false +; +: read-gpt-sector ( sector# -- ) + dup the-sector = if drop exit then ( sector# ) + dup to the-sector ( sector# ) + read-hw-sector +; + +: select-gpt-partition ( adr -- ) + dup gpt-blk0 x>u to sector-offset ( adr ) + gpt-#blks /sector xu*d to size-high to size-low ( ) +; + +: partition-name= ( adr -- flag ) + d# 56 + ( utf16-name-adr ) + partition-name$ bounds ?do ( utf16-name-adr ) + dup w@ i c@ <> if ( utf16-name-adr ) + drop false unloop exit ( -- false ) + then ( utf16-name-adr ) + wa1+ ( utf16-name-adr' ) + loop ( utf16-name-adr ) + w@ 0= ( flag ) +; + +: >gpt-entry ( n -- adr ) + /gpt-entry * ( offset ) + /sector /mod ( rem quot ) + partition-lba0 x>u + ( rem sector# ) + read-gpt-sector ( rem ) + sector-buf + ( adr ) +; +: nth-gpt-partition ( n -- ) + 1- >gpt-entry select-gpt-partition ( ) +; +: gpt-active? ( adr -- flag ) d# 16 0 bskip 0<> ; + +: named-gpt-partition ( -- ) + #gpt-partitions 0 ?do + i >gpt-entry ( adr ) + dup gpt-active? if ( adr ) + dup partition-name= if ( adr ) + select-gpt-partition ( ) + leave ( ) + then ( adr ) + then ( adr ) + drop ( ) + loop ( ) +; +: gpt-map ( -- ) + get-gpt-info abort" Invalid GUID Partition Table" + #part 1 >= if + #part nth-gpt-partition + else + named-gpt-partition + then +; Added: ofw/disklabel/gpttools.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ ofw/disklabel/gpttools.fth Sat Aug 6 00:23:50 2011 (r2416) @@ -0,0 +1,20 @@ +32\ : le-x@ ( adr -- x ) dup le-l@ swap la1+ le-l@ ; +0 value #gpt-partitions +0 value /gpt-entry +32\ 0. 2value partition-lba0 +32\ alias x>u drop +32\ alias u>x u>d +32\ alias x+ d+ +32\ alias x- d- +32\ alias xswap 2swap +32\ : onex 1. ; +: du* ( d1 u -- d2 ) + tuck u* >r ( d1.lo u r: d2.hi ) + um* 0 r> d+ ( d2 ) +; +32\ : xu*d ( x u -- d ) du* ; +64\ alias xu*d um* + +: gpt-magic ( -- adr len ) " EFI PART" ; +: gpt-blk0 ( adr -- d.blk0 ) d# 32 + le-x@ ; +: gpt-#blks ( adr -- d.blks ) dup d# 40 + le-x@ rot gpt-blk0 x- onex d+ ; Modified: ofw/disklabel/loadpkg.fth ============================================================================== --- ofw/disklabel/loadpkg.fth Fri Aug 5 03:16:10 2011 (r2415) +++ ofw/disklabel/loadpkg.fth Sat Aug 6 00:23:50 2011 (r2416) @@ -12,6 +12,7 @@ [ifdef] hfs-support fload ${BP}/ofw/fs/macfs/partition.fth [then] +fload ${BP}/ofw/disklabel/gpt.fth fload ${BP}/ofw/disklabel/methods.fth \ LICENSE_BEGIN Modified: ofw/disklabel/methods.fth ============================================================================== --- ofw/disklabel/methods.fth Fri Aug 5 03:16:10 2011 (r2415) +++ ofw/disklabel/methods.fth Sat Aug 6 00:23:50 2011 (r2416) @@ -80,6 +80,8 @@ mac-disk? if mac-map exit then [then] + gpt? if gpt-map exit then + fdisk? if fdisk-map exit then \ We check for ISO 9660 after the ones above, because they can be @@ -162,6 +164,7 @@ \ <digit>: FDISK partition number \ <letter>: UFS partition letter (a..h) \ <digit><letter>: UFS partition embedded within FDISK partition +\ -<decimal-digits>: The last N blocks of the disk \ partition# is one of: \ -1, meaning the default partition, i.e. no partition was specified @@ -171,15 +174,26 @@ \ In addition, ufs-partition is set to the UFS partition letter (a..h) \ if the string appears to contain a letter. -: parse-partition ( -- ) - null$ to filename -1 to #part 0 to ufs-partition +: decode-partition ( adr len -- rem$ ) + \ If the string parses as a decimal number, it's a partition# if + \ positive or the last N blocks if negative + 2dup push-decimal $number pop-base 0= if ( adr len n ) + dup 0< if ( adr len n ) + /sector um* ( adr len d.partition-size ) + get-disk-size size-low size-high ( adr len d.partition-size d.disk-size ) + 2over d- /sector um/mod nip ( adr len d.partition-size partition-sector ) + to sector-offset ( adr len d.partition-size ) + to size-high to size-low ( adr len ) + -2 to #part ( adr len ) \ Tell select-partition + else ( adr len n ) + to #part ( adr len ) + then ( adr len ) + drop 0 ( adr 0 ) + exit ( rem$ -- ) + then ( adr len ) - my-args ( adr len ) - - \ An empty arg string is treated as a null partition and a null filename - dup 0= if 2drop exit then ( adr len ) - - \ If the first character of the string is a digit, it's a partition # + \ If the first character of the string is a decimal number, it's a partition #, + \ possibly followed by UFS partition letter over c@ ascii 0 ascii 9 between if ( adr len ) over c@ ascii 0 - to #part ( adr len ) 1 /string ( adr' len' ) @@ -192,28 +206,24 @@ 1 /string ( adr' len' ) dup 0= if 2drop exit then ( adr len ) then ( adr len ) +; +: parse-partition ( -- ) + null$ to filename null$ to partition-name$ -1 to #part 0 to ufs-partition - \ If the first character is "-", it is followed by a decimal number N and - \ the "partition" is the last N blocks - over c@ ascii - = if ( adr len ) - 1 /string ( adr' len' ) - push-decimal $number pop-base if ( ) - ." Bad decimal number after '-' in partition spec" cr - exit - then ( n ) - /sector um* ( d.partition-size ) - get-disk-size size-low size-high ( d.partition-size d.disk-size ) - 2over d- /sector um/mod nip ( d.partition-size partition-sector ) - to sector-offset ( d.partition-size ) - to size-high to size-low ( ) - -2 to #part ( ) \ Tell select-partition - exit - then ( adr len ) + my-args ( adr len ) - \ If the first character of the string is ",", discard it - over c@ ascii , = if ( adr len ) - 1 /string ( adr' len' ) - then ( adr' len' ) + \ An empty arg string is treated as a null partition and a null filename + dup 0= if 2drop exit then ( adr len ) + + \ If the string contains a comma, the first half is the partition name + " ," lex if ( tail$ head$ delim ) + drop 2dup to partition-name$ ( tail$ head$ ) + decode-partition 2drop ( tail$ ) + to filename ( ) + exit ( -- ) + then ( adr len ) + + decode-partition ( rem$ ) \ The remainder of the string, if any, is the filename to filename @@ -239,7 +249,7 @@ : close ( -- ) sector-buf if sector-buf /sector free-mem then ; : size ( -- d ) size-low size-high ; : load ( adr -- len ) - \ This load method is used only for type 41 partitions + \ This load method is used only for type 41 (IBM "PREP") partitions partition-type h# 41 <> if drop 0 exit then 0 0 " seek" $call-parent drop ( adr ) Added: ofw/disklabel/showgpt.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ ofw/disklabel/showgpt.fth Sat Aug 6 00:23:50 2011 (r2416) @@ -0,0 +1,180 @@ +\ See license at end of file +purpose: GUID Partition Table handler + +d# 512 value /gpt-sector + +32\ : read-gpt-sector ( x.lba# -- ) +32\ drop /gpt-sector um* " seek" disk-dev $call-method drop +32\ sector-buf /gpt-sector " read" disk-dev $call-method drop +32\ ; +0 value gpt-entries/sector + +-1 value this-sector +: get-gpt-entry ( partition# -- adr ) + gpt-entries/sector /mod ( rem quot ) + dup this-sector <> if ( rem quot ) + dup to this-sector ( rem quot ) + u>x partition-lba0 x+ ( rem lba# ) + read-gpt-sector ( rem ) + else ( rem quot ) + drop ( rem ) + then ( rem ) + /gpt-entry * sector-buf + ( adr ) +; +: .gpt-bounds ( adr -- ) + push-hex + dup gpt-blk0 d# 12 ud.r space ( adr ) + gpt-#blks d# 10 ud.r space ( ) + pop-base ( ) +; +: utf16-emit ( w -- ) + wbsplit if + \ Emit "?" for code points we can't handle + drop ." ?" + else + \ Don't emit nulls + ?dup if emit then + then +; +: .gpt-name ( adr -- ) + d# 56 + d# 72 bounds do + i w@ utf16-emit + /w +loop +; +string-array partition-type-guids +," 00000000-0000-0000-0000-000000000000" ," Unused entry" +," 024DEE41-33E7-11D3-9D69-0008C781F39F" ," MBR scheme" +," C12A7328-F81F-11D2-BA4B-00A0C93EC93B" ," EFI System" +," 21686148-6449-6E6F-744E-656564454649" ," BIOS Boot" +," E3C9E316-0B5C-4DB8-817D-F92DF00215AE" ," Windows Reserved" +," EBD0A0A2-B9E5-4433-87C0-68B6B72699C7" ," Windows Basic data" +," 5808C8AA-7E8F-42E0-85D2-E1E90434CFB3" ," Windows LDM metadata" +," AF9B60A0-1431-4F62-BC68-3311714A69AD" ," Windows LDM data" +," DE94BBA4-06D1-4D40-A16A-BFD50179D6AC" ," Windows Recovery Environment" +," 37AFFC90-EF7D-4E96-91C3-2D7AE055B174" ," Windows IBM GPFS" +," 75894C1E-3AEB-11D3-B7C1-7B03A0000000" ," HP-UX Data" +," E2A1E728-32E3-11D6-A682-7B03A0000000" ," HP-UX Service" +," 0FC63DAF-8483-4772-8E79-3D69D8477DE4" ," Linux filesystem data" +," A19D880F-05FC-4D3B-A006-743F0F84911E" ," Linux RAID" +," 0657FD6D-A4AB-43C4-84E5-0933C84B4F4F" ," Linux Swap" +," E6D6D379-F507-44C2-A23C-238F2A3DF928" ," Linux LVM" +," 8DA63339-0007-60C0-C436-083AC8230908" ," Linux Reserved" +," 83BD6B9D-7F41-11DC-BE0B-001560B84F0F" ," FreeBSD Boot" +," 516E7CB4-6ECF-11D6-8FF8-00022D09712B" ," FreeBSD Data" +," 516E7CB5-6ECF-11D6-8FF8-00022D09712B" ," FreeBSD Swap" +," 516E7CB6-6ECF-11D6-8FF8-00022D09712B" ," FreeBSD UFS" +," 516E7CB8-6ECF-11D6-8FF8-00022D09712B" ," FreeBSD Vinum volume manager" +," 516E7CBA-6ECF-11D6-8FF8-00022D09712B" ," FreeBSD ZFS" +," 48465300-0000-11AA-AA11-00306543ECAC" ," Apple HFS+" +," 55465300-0000-11AA-AA11-00306543ECAC" ," Apple UFS" +," 6A898CC3-1DD2-11B2-99A6-080020736631" ," Apple ZFS" +," 52414944-0000-11AA-AA11-00306543ECAC" ," Apple RAID" +," 52414944-5F4F-11AA-AA11-00306543ECAC" ," Apple RAID offline" +," 426F6F74-0000-11AA-AA11-00306543ECAC" ," Apple Boot" +," 4C616265-6C00-11AA-AA11-00306543ECAC" ," Apple Label" +," 5265636F-7665-11AA-AA11-00306543ECAC" ," Apple TV Recovery" +," 6A82CB45-1DD2-11B2-99A6-080020736631" ," Solaris Boot" +," 6A85CF4D-1DD2-11B2-99A6-080020736631" ," Solaris Root" +," 6A87C46F-1DD2-11B2-99A6-080020736631" ," Solaris Swap" +," 6A8B642B-1DD2-11B2-99A6-080020736631" ," Solaris Backup" +," 6A898CC3-1DD2-11B2-99A6-080020736631" ," Solaris /usr" +," 6A8EF2E9-1DD2-11B2-99A6-080020736631" ," Solaris /var" +," 6A90BA39-1DD2-11B2-99A6-080020736631" ," Solaris /home" +," 6A9283A5-1DD2-11B2-99A6-080020736631" ," Solaris Alternate sector" +," 6A945A3B-1DD2-11B2-99A6-080020736631" ," Solaris Reserved" +," 6A9630D1-1DD2-11B2-99A6-080020736631" ," Solaris Reserved" +," 6A980767-1DD2-11B2-99A6-080020736631" ," Solaris Reserved" +," 6A96237F-1DD2-11B2-99A6-080020736631" ," Solaris Reserved" +," 6A8D2AC7-1DD2-11B2-99A6-080020736631" ," Solaris Reserved" +," 49F48D32-B10E-11DC-B99B-0019D1879648" ," NetBSD Swap" +," 49F48D5A-B10E-11DC-B99B-0019D1879648" ," NetBSD FFS" +," 49F48D82-B10E-11DC-B99B-0019D1879648" ," NetBSD LFS" +," 49F48DAA-B10E-11DC-B99B-0019D1879648" ," NetBSD RAID" +," 2DB519C4-B10F-11DC-B99B-0019D1879648" ," NetBSD Concatenated" +," 2DB519EC-B10F-11DC-B99B-0019D1879648" ," NetBSD Encrypted" +," FE3A2A5D-4F32-41A7-B725-ACCC3285A309" ," ChromeOS kernel" +," 3CB8E202-3B7E-47DD-8A3C-7FF2A13CFCEC" ," ChromeOS rootfs" +," 2E0A753D-9E48-43B0-8337-B15192CB1B5E" ," ChromeOS future-use" +end-string-array + +\ Convert the binary encoding of a GUID to the text encoding +\ The first three components are in native byte order - which I think +\ means little-endian for GPT GUIDs. The last two components are big-endian. +d# 36 buffer: 'guid + +: >guid$ ( adr -- adr len ) + push-hex ( adr ) + dup le-l@ (.8) 'guid swap move + + [char] - 'guid 8 + c! + dup 4 + le-w@ (.4) 'guid d# 9 + swap move + + [char] - 'guid d# 13 + c! + dup 6 + le-w@ (.4) 'guid d# 14 + swap move + + [char] - 'guid d# 18 + c! + dup 8 + be-w@ (.4) 'guid d# 19 + swap move + + [char] - 'guid d# 23 + c! + d# 10 + ( adr ) + 6 0 do ( adr ) + dup i + c@ (.2) ( adr $ ) + 'guid d# 24 + i wa+ swap move ( adr ) + loop ( adr ) + drop ( ) + + pop-base ( ) + + 'guid d# 36 2dup upper ( adr len ) +; + +: .gpt-type ( adr -- ) + >guid$ 2>r 0 ( string# r: guid$ ) + begin ( string# r: guid$ ) + dup ['] partition-type-guids ( string# string# xt r: guid$ ) + catch 0= while ( string# 'this r: guid$ ) + count 2r@ $= if ( string# r: guid$ ) + 1+ partition-type-guids count type ( r: guid$ ) + 2r> 2drop exit ( -- ) + then ( string# r: guid$ ) + 2+ ( string#' r: guid$ ) + repeat ( string# x r: guid$ ) + 2r> type ( string# x ) + 2drop ( ) +; + +: .gpt-partition ( adr # -- ) + \ Skip unused entries + over 8 0 bskip 0= if 2drop exit then ( adr i ) + push-decimal 2 u.r space pop-base ( adr ) + dup .gpt-bounds ( adr ) + dup .gpt-name ( adr ) +\ dup .gpt-guid ( adr ) + d# 50 to-column ( adr ) + dup .gpt-type ( adr ) + drop cr ( ) +; +: .gpt-partitions ( -- ) + cr + ." # FirstBlk NumBlks Name Type" cr + ." - -------- ------- ---- ----" cr + #gpt-partitions 0 do ( ) + i get-gpt-entry i 1+ .gpt-partition ( ) + loop ( ) +; +: .gpt ( -- ) + onex read-gpt-sector + sector-buf gpt-magic comp if + ." Bad signature in GUID partition table header" cr + exit + then + push-hex +\ ." FirstBlk: " sector-buf d# 40 le-x@ d. +\ ." LastBlk: " sector-buf d# 48 le-x@ d. + pop-base + sector-buf d# 72 + le-x@ to partition-lba0 + sector-buf d# 80 + le-l@ to #gpt-partitions + sector-buf d# 84 + le-l@ to /gpt-entry + /gpt-sector /gpt-entry / to gpt-entries/sector + .gpt-partitions +; Modified: ofw/fs/fatfs/fdisk2.fth ============================================================================== --- ofw/fs/fatfs/fdisk2.fth Fri Aug 5 03:16:10 2011 (r2415) +++ ofw/fs/fatfs/fdisk2.fth Sat Aug 6 00:23:50 2011 (r2416) @@ -27,6 +27,11 @@ headerless +0 value sector-buf +h# 200 constant /sector +0 value disk-dev +fload ${BP}/ofw/disklabel/showgpt.fth \ GUID Partition table decoding + 0 value partition# 0 value partition-offset true value primary? @@ -40,6 +45,7 @@ cr cr ; + : .0x ( n -- ) push-hex dup 9 <= if 6 u.r else ." 0x" (.2) type then \ Type field @@ -49,8 +55,7 @@ : (.1partition) ( adr -- ) dup d# 12 + le-l@ 0= if drop exit then \ Empty entry primary? 0= if dup 4 + c@ 5 = if drop exit then then \ Logical extension entry - base @ >r - decimal + push-decimal partition# dup 5 u.r 6 spaces 1+ to partition# primary? if ." Primary" else ." Logical" then \ Primary/Logical partition dup c@ if ." Yes " else ." No " then \ Boot indicator @@ -64,6 +69,7 @@ h# c of ." FAT-32 LBA" endof h# e of ." FAT-16 LBA" endof h# 83 of ." ext2 " endof \ Linux EXT2 + h# ee of ." GUID " endof dup .0x endcase \ dup 1 + .hsc @@ -72,28 +78,31 @@ \ dup 8 + le-l@ 9 u.r \ Start block 2 spaces d# 12 + le-l@ d# 1024 + d# 2048 / 6 u.r \ Size in MB - r> base ! cr + pop-base ; -0 value sector-buf -h# 200 constant /sector -0 value disk-dev : (.partitions) ( block-adr -- ) - dup h# 1be + - 4 0 do - dup (.1partition) - dup 4 + c@ 5 = if - d# 8 + le-l@ partition-offset + - primary? if dup to partition-offset then - /sector um* " seek" disk-dev $call-method drop - dup /sector " read" disk-dev $call-method drop - false to primary? - recurse unloop exit - then - h# 10 + - loop - 2drop + dup h# 1be + ( adr partadr ) + 4 0 do ( adr partadr ) + dup (.1partition) ( adr partadr ) + dup 4 + c@ case ( adr partadr ) + 5 of ( adr partadr ) + d# 8 + le-l@ partition-offset + ( adr part-offset ) + primary? if dup to partition-offset then ( adr part-offset ) + /sector um* " seek" disk-dev $call-method drop ( adr ) + dup /sector " read" disk-dev $call-method drop ( adr ) + false to primary? ( adr ) + recurse unloop exit ( -- ) + endof ( adr partadr ) + h# ee of ( adr partadr ) + .gpt ( adr partadr ) + leave ( adr partadr ) + endof ( adr partadr ) + endcase ( adr partadr ) + h# 10 + ( adr partadr' ) + loop ( adr partadr ) + 2drop ( ) ; : free-buf ( -- ) sector-buf /sector free-mem ; Modified: ofw/fs/fatfs/partition.fth ============================================================================== --- ofw/fs/fatfs/partition.fth Fri Aug 5 03:16:10 2011 (r2415) +++ ofw/fs/fatfs/partition.fth Sat Aug 6 00:23:50 2011 (r2416) @@ -53,12 +53,12 @@ false ; -\ ??? i b s n apparently means #sectors start-sector boot-indicator system-indicator -\ system-indicator: 0 no FAT, 1 12-bit FAT, 4 16-bit FAT, 5 extended, 6 over 32M -\ ... b FAT 32, c FAT 32 LBA, e FAT-16 LBA, f extended LBA +\ ??? n,s,b,t means #sectors start-sector boot-indicator type +\ type: 0 empty, 1 12-bit FAT, 4 16-bit FAT, 5 extended, 6 over 32M +\ ... b FAT 32, c FAT 32 LBA, e FAT-16 LBA, f extended LBA \ boot-indicator: 80 bootable -: process-ptable ( -- true | i1 b1 s1 n1 i2 b2 s2 n2 i3 b3 s3 n3 i4 b4 s4 n4 false ) +: process-ptable ( -- true | n,s,b,t4 n,s,b,t3 n,s,b,t2 n,s,b,t1 false ) sector-buf h# 1fe + le-w@ h# aa55 <> if true exit then \ Process a real partition table @@ -73,31 +73,31 @@ 0 instance value extended-offset false value found? -defer suitable? ( s n -- s n flag ) +defer suitable? ( b t -- b t flag ) : (find-partition ( sector-offset -- not-found? ) - >r process-ptable if r> drop false exit then r> + >r process-ptable if r> drop false exit then r> ( n,s,b,t*4 sector-offset ) - 4 0 do ( i,b,s,nN ... i,b,s,n1 sector-offset ) - >r ( ... i,b,s,n ) - found? if \ partition was found ( ... i,b,s,n ) + 4 0 do ( n,s,b,tN ... n,s,b,t1 sector-offset ) + >r ( ... n,s,b,t ) + found? if \ partition was found ( ... n,s,b,t ) 2drop 2drop ( ... ) - else ( ... i,b,s,n ) - ?dup 0= if ( ... i,b,s ) - \ no FAT, skip it. + else ( ... n,s,b,t ) + ?dup 0= if ( ... n,s,b ) + \ empty, skip it. 3drop ( ... ) - else ( ... i,b,s,n ) - dup 5 = over h# f = or if \ extended partition ( ... i,b,s,n ) - 2drop nip ( ... b ) + else ( ... n,s,b,t ) + dup 5 = over h# f = or if \ extended partition ( ... n,s,b,t ) + 2drop nip ( ... s ) extended-offset dup 0= if over to extended-offset then + dup read-sector recurse drop ( ... ) - else \ Ordinary partition ( ... i,b,s,n ) - suitable? if ( ... i,b,s,n ) - to partition-type drop ( ... i,b ) - r@ + to sector-offset ( ... i ) + else \ Ordinary partition ( ... n,s,b,t ) + suitable? if ( ... n,s,b,t ) + to partition-type drop ( ... n,s ) + r@ + to sector-offset ( ... n ) /sector um* to size-high to size-low ( ... ) true to found? ( ... ) - else ( ... i,b,s,n ) + else ( ... n,s,b,t ) 4drop ( ... ) then ( ... ) then ( ... )

1 0

[commit] r2415 - cpu/arm/olpc/1.75
by repository service 05 Aug '11

05 Aug '11

Author: quozl Date: Fri Aug 5 03:16:10 2011 New Revision: 2415 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2415 Log: Q4B07 Modified: cpu/arm/olpc/1.75/fw-version.fth Modified: cpu/arm/olpc/1.75/fw-version.fth ============================================================================== --- cpu/arm/olpc/1.75/fw-version.fth Fri Aug 5 02:41:47 2011 (r2414) +++ cpu/arm/olpc/1.75/fw-version.fth Fri Aug 5 03:16:10 2011 (r2415) @@ -1,3 +1,3 @@ \ The overall firmware revision macro: FW_MAJOR B -macro: FW_MINOR 06 +macro: FW_MINOR 07

1 0

[commit] r2414 - cpu/arm/olpc/1.75
by repository service 05 Aug '11

05 Aug '11

Author: quozl Date: Fri Aug 5 02:41:47 2011 New Revision: 2414 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2414 Log: OLPC XO-1.75 - update help, it was XO-1 specific Added: cpu/arm/olpc/1.75/help.fth Modified: cpu/arm/olpc/1.75/fw.bth Modified: cpu/arm/olpc/1.75/fw.bth ============================================================================== --- cpu/arm/olpc/1.75/fw.bth Fri Aug 5 02:22:51 2011 (r2413) +++ cpu/arm/olpc/1.75/fw.bth Fri Aug 5 02:41:47 2011 (r2414) @@ -161,7 +161,7 @@ : rom-pa ( -- adr ) mfg-data-buf mfg-data-offset - ; \ Fake out setwp.fth fload ${BP}/cpu/x86/pc/olpc/setwp.fth -fload ${BP}/cpu/x86/pc/olpc/help.fth +fload ${BP}/cpu/arm/olpc/1.75/help.fth fload ${BP}/cpu/x86/pc/olpc/gui.fth fload ${BP}/cpu/x86/pc/olpc/strokes.fth fload ${BP}/cpu/x86/pc/olpc/plot.fth Added: cpu/arm/olpc/1.75/help.fth ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/arm/olpc/1.75/help.fth Fri Aug 5 02:41:47 2011 (r2414) @@ -0,0 +1,33 @@ +purpose: Basic help for OLPC OFW + +warning @ warning off +: help ( -- ) + blue-letters ." INSTALLATION:" black-letters mcr + \ ================================================================================ + ." fs-update u:\os1.zd4 Install OS from USB drive to internal storage" mcr + ." flash u:\q4b07.rom Install firmware from USB drive" mcr + ." flash ext:\q4b07.rom Install firmware from external SD card" mcr + blue-letters ." DIRECTORY LISTING:" black-letters mcr + ." dir u:\ List USB drive root directory" mcr + ." dir u:\boot\ List USB drive /boot directory" mcr + ." dir int:\boot\*.zip List .zip files in internal SD /boot directory" mcr + blue-letters ." BOOTING:" black-letters mcr + ." boot Start the OS from list of default locations" mcr + ." printenv boot-device Show the list of default locations used by boot" mcr + ." boot u:\test.fth Start the OS from a specific location" mcr + blue-letters ." CONFIGURATION VARIABLES FOR BOOTING:" black-letters mcr + ." boot-device Kernel or boot script paths. Example: ext:\boot\olpc.fth" mcr + ." boot-file Default kernel command line. Example: console=ttyS0,115200" mcr + ." ramdisk Initial RAMDISK path. Example: int:\boot\initrd.img" mcr + blue-letters ." MANAGING CONFIGURATION VARIABLES:" black-letters mcr + ." printenv [ <name> ] Show configuration variables" mcr + ." setenv <name> <value> Set configuration variable" mcr + ." editenv <name> Edit configuration variable" mcr + blue-letters ." DIAGNOSTICS:" black-letters mcr + ." test <device-name> Test device. Example: test mouse" mcr + ." test-all Test all devices that have test routines" mcr + ." menu Graphical interface to selftests" mcr + blue-letters ." More information: " black-letters mcr + green-letters ." http://wiki.laptop.org/go/OFW_FAQ" black-letters cr +; +warning !

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

openfirmware