[SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up (Summary: not final fixed yet)

Idwer Vollering vidwer at gmail.com
Wed Sep 2 15:22:30 CET 2015 

2015-08-26 14:33 GMT+02:00 Zheng Bao <fishbaoz at hotmail.com>:
> Yes. Need test by our validation dept.

Hello Zheng,

Is there an estimated turnaround time for changes to be delivered?

Would the following changesets apply to Trinity?
http://review.coreboot.org/#/c/11375/
http://review.coreboot.org/#/c/11376/
http://review.coreboot.org/#/c/11377/

Idwer

>
>
>> Date: Wed, 26 Aug 2015 13:55:52 +0200
>> From: vidwer at gmail.com
>> To: seabios at seabios.org
>> Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
>> attached when power up (Summary: not final fixed yet)
>
>>
>> 2015-08-26 10:02 GMT+02:00 Zheng Bao <fishbaoz at hotmail.com>:
>> > Changing the AMD register in Coreboot code can only solve the USB3
>> > problem
>> > in OS. In SeaBIOS stage, the problem still exists.
>>
>> Will you submit a change to AGESA?
>>
>> >
>> > I will start a new thread to describe the problem.
>> >
>> > Zheng
>> >
>> > ________________________________
>> > From: fishbaoz at hotmail.com
>> > To: vidwer at gmail.com; seabios at seabios.org
>> > Date: Wed, 26 Aug 2015 05:35:12 +0000
>> > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
>> > attached
>> > when power up
>> >
>> > Problem solved. It is about a internal register setting.
>> > Zheng
>> >
>> >
>> > ________________________________
>> > From: fishbaoz at hotmail.com
>> > To: vidwer at gmail.com; seabios at seabios.org
>> > Date: Tue, 25 Aug 2015 12:06:34 +0000
>> > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
>> > attached
>> > when power up
>> >
>> > Message after power up. xhci is ok.
>> > ----------------------------
>> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv)
>> > Found coreboot cbmem console @ bffde000
>> > Found mainboard AMD Parmer
>> > Relocating init from 0x000e7b40 to 0xbff55050 (size 40688)
>> > Found CBFS header at 0xfffffc60
>> > CPU Mhz=2497
>> > Found 23 PCI devices (max PCI bus is 02)
>> > Copying SMBIOS entry point from 0xbffa7000 to 0x000f1a10
>> > Copying ACPI RSDP from 0xbffb8000 to 0x000f19e0
>> > Copying MPTABLE from 0xbffdc000/bffdc010 to 0x000f17b0
>> > Copying PIR from 0xbffdd000 to 0x000f1780
>> > Using pmtimer, ioport 0x818
>> > Scan for VGA option rom
>> > Running option rom at c000:0003
>> > Turning on vga text mode console
>> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv)
>> > /bff52000\ Start thread
>> > |bff52000| XHCI init on dev 00:10.0: regs @ 0xf0248000, 4 ports, 32
>> > slots,
>> > 32 byte contexts
>> > |bff52000| XHCI extcap 0x1 @ f0248500
>> > |bff52000| XHCI protocol USB 3.00, 2 ports (offset 1), def 0
>> > |bff52000| XHCI protocol USB 2.00, 2 ports (offset 3), def 0
>> > /bff51000\ Start thread
>> > |bff51000| configure_xhci: resetting
>> > Found 1 serial ports
>> > AHCI controller at 11.0, iobase f024d000, irq 0
>> > AHCI: cap 0xf3309f05, ports_impl 0x3f
>> > /bff50000\ Start thread
>> > |bff50000| AHCI/0: probing
>> > |bff52000| EHCI init on dev 00:12.2 (regs=0xf024d820)
>> > /bff4f000\ Start thread
>> > /bff4d000\ Start thread
>> > |bff4d000| AHCI/1: probing
>> > |bff50000| AHCI/0: link down
>> > |bff52000| EHCI init on dev 00:13.2 (regs=0xf024d920)
>> > /bff4c000\ Start thread
>> > /bff4b000\ Start thread
>> > |bff4b000| AHCI/2: probing
>> > |bff4d000| AHCI/1: link down
>> > \bff50000/ End thread
>> > |bff52000| OHCI init on dev 00:12.0 (regs=0xf024a000)
>> > /bff50000\ Start thread
>> > /bff4a000\ Start thread
>> > /bff49000\ Start thread
>> > |bff49000| AHCI/3: probing
>> > |bff4b000| AHCI/2: link down
>> > \bff4d000/ End thread
>> > |bff52000| OHCI init on dev 00:13.0 (regs=0xf024b000)
>> > /bff4d000\ Start thread
>> > /bff48000\ Start thread
>> > /bff47000\ Start thread
>> > /bff45000\ Start thread
>> > |bff45000| AHCI/4: probing
>> > |bff49000| AHCI/3: link down
>> > \bff4b000/ End thread
>> > |bff52000| OHCI init on dev 00:14.5 (regs=0xf024c000)
>> > /bff4b000\ Start thread
>> > /bff44000\ Start thread
>> > /bff43000\ Start thread
>> > /bff42000\ Start thread
>> > |bff42000| AHCI/5: probing
>> > |bff45000| AHCI/4: link down
>> > \bff49000/ End thread
>> > \bff52000/ End thread
>> > /bff52000\ Start thread
>> > \bff52000/ End thread
>> > /bff52000\ Start thread
>> > |bff42000| AHCI/5: link down
>> > \bff45000/ End thread
>> > /bff49000\ Start thread
>> > /bff46000\ Start thread
>> > /bff45000\ Start thread
>> > \bff42000/ End thread
>> > /bff42000\ Start thread
>> > /bff41000\ Start thread
>> > /bff40000\ Start thread
>> > /bff3f000\ Start thread
>> > /bff3e000\ Start thread
>> > /bff3d000\ Start thread
>> > /bff3c000\ Start thread
>> > /bff3b000\ Start thread
>> > |bff3b000| XHCI port #2: 0x00021203, powered, enabled, pls 0, speed 4
>> > [Super]
>> > /bff3a000\ Start thread
>> > /bff39000\ Start thread
>> > /bff38000\ Start thread
>> > /bff37000\ Start thread
>> > /bff36000\ Start thread
>> > /bff35000\ Start thread
>> > |bff3b000| xhci_alloc_pipe: usbdev 0xbff53350, ring 0xbff9e400, slotid
>> > 0,
>> > epid 1
>> > |bff3b000| xhci_cmd_enable_slot:
>> > |bff3b000| xhci_trb_queue: ring 0xbff9ed00 [nidx 1, len 0]
>> > |bff3b000| xhci_process_events: status change port #2
>> > |bff3b000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed00, evt
>> > 0xbff9ee00, type 33, eidx 1, cc 1]
>> > |bff3b000| xhci_alloc_pipe: enable slot: got slotid 1
>> > |bff3b000| xhci_cmd_address_device: slotid 1
>> > |bff3b000| xhci_trb_queue: ring 0xbff9ed00 [nidx 2, len 0]
>> > /bff34000\ Start thread
>> > /bff33000\ Start thread
>> > |bff3b000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed10, evt
>> > 0xbff9ee00, type 33, eidx 2, cc 1]
>> > |bff3b000| xhci_realloc_pipe: usbdev 0xbff53350, ring 0xbff9e400, slotid
>> > 1,
>> > epid 1
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 1, len 8]
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 2, len 8]
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 3, len 0]
>> > |bff3b000| xhci_xfer_kick: ring 0xbff9e400, slotid 1, epid 1
>> > |bff3b000| xhci_process_events: ring 0xbff9e400 [trb 0xbff9e420, evt
>> > 0xbff9e500, type 32, eidx 3, cc 1]
>> > |bff3b000| xhci_realloc_pipe: usbdev 0xbff53350, ring 0xbff9e400, slotid
>> > 1,
>> > epid 1
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 4, len 8]
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 5, len 9]
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 6, len 0]
>> > |bff3b000| xhci_xfer_kick: ring 0xbff9e400, slotid 1, epid 1
>> > |bff3b000| xhci_process_events: ring 0xbff9e400 [trb 0xbff9e450, evt
>> > 0xbff9e500, type 32, eidx 6, cc 1]
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 7, len 8]
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 8, len 44]
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 9, len 0]
>> > |bff3b000| xhci_xfer_kick: ring 0xbff9e400, slotid 1, epid 1
>> > |bff3b000| xhci_process_events: ring 0xbff9e400 [trb 0xbff9e480, evt
>> > 0xbff9e500, type 32, eidx 9, cc 1]
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 10, len 8]
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 11, len 0]
>> > |bff3b000| xhci_xfer_kick: ring 0xbff9e400, slotid 1, epid 1
>> > |bff3b000| xhci_process_events: ring 0xbff9e400 [trb 0xbff9e4a0, evt
>> > 0xbff9e500, type 32, eidx 11, cc 1]
>> > |bff3b000| xhci_alloc_pipe: usbdev 0xbff53350, ring 0x000eee00, slotid
>> > 0,
>> > epid 3
>> > |bff3b000| xhci_cmd_configure_endpoint: slotid 1, add 0x9, del 0x0
>> > |bff3b000| xhci_trb_queue: ring 0xbff9ed00 [nidx 3, len 0]
>> > |bff3a000| usb_hid_setup 0xbff4e920
>> > |bff3b000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed20, evt
>> > 0xbff9ee00, type 33, eidx 3, cc 1]
>> > |bff3b000| xhci_alloc_pipe: usbdev 0xbff53350, ring 0x000eec00, slotid
>> > 0,
>> > epid 4
>> > |bff3b000| xhci_cmd_configure_endpoint: slotid 1, add 0x11, del 0x0
>> > |bff3b000| xhci_trb_queue: ring 0xbff9ed00 [nidx 4, len 0]
>> > |bff3b000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed30, evt
>> > 0xbff9ee00, type 33, eidx 4, cc 1]
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 12, len 8]
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 13, len 1]
>> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 14, len 0]
>> > |bff3b000| xhci_xfer_kick: ring 0xbff9e400, slotid 1, epid 1
>> > |bff3a000| USB keyboard initialized
>> > \bff3a000/ End thread
>> > |bff3b000| xhci_process_events: ring 0xbff9e400 [trb 0xbff9e4d0, evt
>> > 0xbff9e500, type 32, eidx 14, cc 1]
>> > |bff3b000| Searching bootorder for:
>> > /pci at i0cf8/usb at 10/storage at 2/*@0/*@0,0
>> > |bff3b000| Searching bootorder for: /pci at i0cf8/usb at 10/usb-*@2
>> > |bff3b000| xhci_trb_queue: ring 0x000eec00 [nidx 1, len 31]
>> > |bff3b000| xhci_xfer_kick: ring 0x000eec00, slotid 1, epid 4
>> > |bff3b000| xhci_process_events: ring 0x000eec00 [trb 0x000eec00, evt
>> > 0x000eed00, type 32, eidx 1, cc 1]
>> > |bff3b000| xhci_trb_queue: ring 0x000eee00 [nidx 1, len 36]
>> > |bff3b000| xhci_xfer_kick: ring 0x000eee00, slotid 1, epid 3
>> > |bff3b000| xhci_process_events: ring 0x000eee00 [trb 0x000eee00, evt
>> > 0x000eef00, type 32, eidx 1, cc 1]
>> > |bff3b000| xhci_trb_queue: ring 0x000eee00 [nidx 2, len 13]
>> > |bff3b000| xhci_xfer_kick: ring 0x000eee00, slotid 1, epid 3
>> > |bff3b000| xhci_process_events: ring 0x000eee00 [trb 0x000eee10, evt
>> > 0x000eef00, type 32, eidx 2, cc 1]
>> > |bff3b000| USB MSC vendor='Seagate' product='FA GoFlex Pro' rev='0210'
>> > type=0 removable=0
>> > |bff3b000| xhci_trb_queue: ring 0x000eec00 [nidx 2, len 31]
>> > |bff3b000| xhci_xfer_kick: ring 0x000eec00, slotid 1, epid 4
>> > |bff3b000| xhci_process_events: ring 0x000eec00 [trb 0x000eec10, evt
>> > 0x000eed00, type 32, eidx 2, cc 1]
>> > |bff3b000| xhci_trb_queue: ring 0x000eee00 [nidx 3, len 13]
>> > |bff3b000| xhci_xfer_kick: ring 0x000eee00, slotid 1, epid 3
>> > |bff3b000| xhci_process_events: ring 0x000eee00 [trb 0x000eee20, evt
>> > 0x000eef00, type 32, eidx 3, cc 1]
>> > |bff3b000| xhci_trb_queue: ring 0x000eec00 [nidx 3, len 31]
>> > |bff3b000| xhci_xfer_kick: ring 0x000eec00, slotid 1, epid 4
>> > |bff3b000| xhci_process_events: ring 0x000eec00 [trb 0x000eec20, evt
>> > 0x000eed00, type 32, eidx 3, cc 1]
>> > |bff3b000| xhci_trb_queue: ring 0x000eee00 [nidx 4, len 8]
>> > |bff3b000| xhci_xfer_kick: ring 0x000eee00, slotid 1, epid 3
>> > |bff3b000| xhci_process_events: ring 0x000eee00 [trb 0x000eee30, evt
>> > 0x000eef00, type 32, eidx 4, cc 1]
>> > |bff3b000| xhci_trb_queue: ring 0x000eee00 [nidx 5, len 13]
>> > |bff3b000| xhci_xfer_kick: ring 0x000eee00, slotid 1, epid 3
>> > |bff3b000| xhci_process_events: ring 0x000eee00 [trb 0x000eee40, evt
>> > 0x000eef00, type 32, eidx 5, cc 1]
>> > |bff3b000| USB MSC blksize=512 sectors=976773167
>> > \bff3b000/ End thread
>> > \bff45000/ End thread
>> > \bff52000/ End thread
>> > \bff43000/ End thread
>> > \bff47000/ End thread
>> > \bff4a000/ End thread
>> > \bff4f000/ End thread
>> > \bff41000/ End thread
>> > \bff46000/ End thread
>> > \bff44000/ End thread
>> > \bff48000/ End thread
>> > \bff4c000/ End thread
>> > \bff39000/ End thread
>> > \bff3c000/ End thread
>> > \bff3f000/ End thread
>> > \bff42000/ End thread
>> > \bff49000/ End thread
>> > \bff50000/ End thread
>> > \bff35000/ End thread
>> > \bff38000/ End thread
>> > \bff3e000/ End thread
>> > \bff33000/ End thread
>> > \bff36000/ End thread
>> > \bff3d000/ End thread
>> > \bff40000/ End thread
>> > \bff51000/ End thread
>> > \bff4d000/ End thread
>> > \bff34000/ End thread
>> > \bff37000/ End thread
>> > \bff4b000/ End thread
>> > All threads complete.
>> > Scan for option roms
>> > Searching bootorder for: /pci at i0cf8/*@1,1
>> >
>> > Press F12 for boot menu.
>> >
>> >
>> > Messge after cold reset. xhci is not ok.
>> > -------------------------------------------------
>> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv)
>> > Found coreboot cbmem console @ bffde000
>> > Found mainboard AMD Parmer
>> > Relocating init from 0x000e7b40 to 0xbff55050 (size 40688)
>> > Found CBFS header at 0xfffffc60
>> > CPU Mhz=2498
>> > Found 23 PCI devices (max PCI bus is 02)
>> > Copying SMBIOS entry point from 0xbffa7000 to 0x000f1a10
>> > Copying ACPI RSDP from 0xbffb8000 to 0x000f19e0
>> > Copying MPTABLE from 0xbffdc000/bffdc010 to 0x000f17b0
>> > Copying PIR from 0xbffdd000 to 0x000f1780
>> > Using pmtimer, ioport 0x818
>> > Scan for VGA option rom
>> > Running option rom at c000:0003
>> > Turning on vga text mode console
>> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv)
>> > /bff52000\ Start thread
>> > |bff52000| XHCI init on dev 00:10.0: regs @ 0xf0248000, 4 ports, 32
>> > slots,
>> > 32 byte contexts
>> > |bff52000| XHCI extcap 0x1 @ f0248500
>> > |bff52000| XHCI protocol USB 3.00, 2 ports (offset 1), def 0
>> > |bff52000| XHCI protocol USB 2.00, 2 ports (offset 3), def 0
>> > /bff51000\ Start thread
>> > |bff51000| configure_xhci: resetting
>> > Found 1 serial ports
>> > AHCI controller at 11.0, iobase f024d000, irq 0
>> > AHCI: cap 0xf3309f05, ports_impl 0x3f
>> > /bff50000\ Start thread
>> > |bff50000| AHCI/0: probing
>> > |bff52000| EHCI init on dev 00:12.2 (regs=0xf024d820)
>> > /bff4f000\ Start thread
>> > /bff4d000\ Start thread
>> > |bff4d000| AHCI/1: probing
>> > |bff50000| AHCI/0: link down
>> > |bff52000| EHCI init on dev 00:13.2 (regs=0xf024d920)
>> > /bff4c000\ Start thread
>> > /bff4b000\ Start thread
>> > |bff4b000| AHCI/2: probing
>> > |bff4d000| AHCI/1: link down
>> > \bff50000/ End thread
>> > |bff52000| OHCI init on dev 00:12.0 (regs=0xf024a000)
>> > /bff50000\ Start thread
>> > /bff4a000\ Start thread
>> > /bff49000\ Start thread
>> > /bff47000\ Start thread
>> > |bff47000| AHCI/3: probing
>> > |bff4b000| AHCI/2: link down
>> > \bff4d000/ End thread
>> > |bff52000| OHCI init on dev 00:13.0 (regs=0xf024b000)
>> > /bff4d000\ Start thread
>> > /bff46000\ Start thread
>> > /bff45000\ Start thread
>> > /bff44000\ Start thread
>> > /bff43000\ Start thread
>> > |bff43000| AHCI/4: probing
>> > |bff47000| AHCI/3: link down
>> > \bff4b000/ End thread
>> > |bff52000| OHCI init on dev 00:14.5 (regs=0xf024c000)
>> > /bff4b000\ Start thread
>> > /bff42000\ Start thread
>> > /bff41000\ Start thread
>> > /bff40000\ Start thread
>> > /bff3f000\ Start thread
>> > |bff3f000| AHCI/5: probing
>> > |bff43000| AHCI/4: link down
>> > \bff47000/ End thread
>> > \bff52000/ End thread
>> > /bff52000\ Start thread
>> > \bff52000/ End thread
>> > /bff52000\ Start thread
>> > /bff47000\ Start thread
>> > |bff47000| xhci_hub_reset port #4: 0x000202e1, powered, pls 7, speed 0 [
>> > - ]
>> > |bff3f000| AHCI/5: link down
>> > \bff43000/ End thread
>> > /bff43000\ Start thread
>> > /bff3e000\ Start thread
>> > /bff3d000\ Start thread
>> > \bff3f000/ End thread
>> > /bff48000\ Start thread
>> > /bff3f000\ Start thread
>> > /bff3c000\ Start thread
>> > /bff3b000\ Start thread
>> > /bff3a000\ Start thread
>> > /bff39000\ Start thread
>> > /bff38000\ Start thread
>> > /bff37000\ Start thread
>> > /bff36000\ Start thread
>> > /bff35000\ Start thread
>> > /bff34000\ Start thread
>> > /bff33000\ Start thread
>> > |bff47000| XHCI port #4: 0x00200e03, powered, enabled, pls 0, speed 3
>> > [High]
>> > |bff47000| xhci_alloc_pipe: usbdev 0xbff538a0, ring 0xbff9e400, slotid
>> > 0,
>> > epid 1
>> > |bff47000| xhci_cmd_enable_slot:
>> > |bff47000| xhci_trb_queue: ring 0xbff9ed00 [nidx 1, len 0]
>> > |bff47000| xhci_process_events: status change port #4
>> > |bff47000| xhci_process_events: status change port #2
>> > |bff47000| xhci_process_events: status change port #4
>> > |bff47000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed00, evt
>> > 0xbff9ee00, type 33, eidx 1, cc 1]
>> > |bff47000| xhci_alloc_pipe: enable slot: got slotid 1
>> > |bff47000| xhci_cmd_address_device: slotid 1
>> > |bff47000| xhci_trb_queue: ring 0xbff9ed00 [nidx 2, len 0]
>> > |bff38000| usb_hid_setup 0xbff4ec10
>> > |bff38000| USB keyboard initialized
>> > \bff38000/ End thread
>> > \bff3d000/ End thread
>> > \bff52000/ End thread
>> > \bff41000/ End thread
>> > \bff45000/ End thread
>> > \bff4a000/ End thread
>> > \bff40000/ End thread
>> > \bff49000/ End thread
>> > \bff3c000/ End thread
>> > \bff3e000/ End thread
>> > \bff42000/ End thread
>> > \bff46000/ End thread
>> > \bff4f000/ End thread
>> > \bff4c000/ End thread
>> > \bff34000/ End thread
>> > \bff37000/ End thread
>> > \bff3a000/ End thread
>> > \bff3f000/ End thread
>> > \bff43000/ End thread
>> > \bff33000/ End thread
>> > \bff35000/ End thread
>> > \bff3b000/ End thread
>> > \bff48000/ End thread
>> > \bff36000/ End thread
>> > \bff39000/ End thread
>> > \bff50000/ End thread
>> > \bff4d000/ End thread
>> > \bff4b000/ End thread
>> > |bff47000| WARNING - Timeout at xhci_event_wait:692!
>> > |bff47000| xhci_alloc_pipe: address device: failed (cc -1)
>> > \bff47000/ End thread
>> > |bff44000| XHCI port #2: 0x00021203, powered, enabled, pls 0, speed 4
>> > [Super]
>> > |bff44000| xhci_alloc_pipe: usbdev 0xbff53250, ring 0xbff9e900, slotid
>> > 0,
>> > epid 1
>> > |bff44000| xhci_cmd_enable_slot:
>> > |bff44000| xhci_trb_queue: ring 0xbff9ed00 [nidx 3, len 0]
>> > |bff44000| WARNING - Timeout at xhci_event_wait:692!
>> > |bff44000| xhci_alloc_pipe: enable slot: failed
>> > \bff44000/ End thread
>> > |bff51000| XHCI no devices found
>> > |bff51000| WARNING - Timeout at wait_bit:310!
>> > \bff51000/ End thread
>> > All threads complete.
>> > Scan for option roms
>> > Searching bootorder for: /pci at i0cf8/*@1,1
>> > ---------------------------
>> >
>> > ________________________________
>> > From: fishbaoz at hotmail.com
>> > To: vidwer at gmail.com; seabios at seabios.org
>> > Date: Tue, 25 Aug 2015 08:33:00 +0000
>> > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
>> > attached
>> > when power up
>> >
>> >
>> > New finding.
>> >
>> > If I cold power up the board, the Hispeed USB harddrive works.
>> > If I press the reset buttong, it doesn't work.
>> > I need to unplug and plug the power cable to make it work again.
>> >
>> > Do you have any idea about that?
>> >
>> > Zheng
>> >
>> >
>> > ________________________________
>> > From: fishbaoz at hotmail.com
>> > To: vidwer at gmail.com; seabios at seabios.org
>> > Date: Tue, 25 Aug 2015 06:11:53 +0000
>> > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
>> > attached
>> > when power up
>> >
>> > I tried with Parmer, which I assume is close to ASUS F2A85-M, and got
>> > the
>> > same result.
>> > :(
>> >
>> > -----------------------------------
>> > hudson_enable()
>> > PCI: 00:10.0 [1022/7812] enabled
>> > hudson_enable()
>> > ----------------------------------------------
>> >
>> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_015821-supersrv)
>> > Found coreboot cbmem console @ bffde000
>> > Found mainboard AMD Parmer
>> > Relocating init from 0x000e7b40 to 0xbff55050 (size 40688)
>> > Found CBFS header at 0xfffffc60
>> > CPU Mhz=2498
>> > Found 23 PCI devices (max PCI bus is 02)
>> > Copying SMBIOS entry point from 0xbffa7000 to 0x000f1a10
>> > Copying ACPI RSDP from 0xbffb8000 to 0x000f19e0
>> > Copying MPTABLE from 0xbffdc000/bffdc010 to 0x000f17b0
>> > Copying PIR from 0xbffdd000 to 0x000f1780
>> > Using pmtimer, ioport 0x818
>> > Scan for VGA option rom
>> > Running option rom at c000:0003
>> > Turning on vga text mode console
>> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_015821-supersrv)
>> > /bff52000\ Start thread
>> > |bff52000| XHCI init on dev 00:10.0: regs @ 0xf0248000, 4 ports, 32
>> > slots,
>> > 32 byte contexts
>> > |bff52000| XHCI extcap 0x1 @ f0248500
>> > |bff52000| XHCI protocol USB 3.00, 2 ports (offset 1), def 0
>> > |bff52000| XHCI protocol USB 2.00, 2 ports (offset 3), def 0
>> > /bff51000\ Start thread
>> > |bff51000| configure_xhci: resetting
>> > Found 1 serial ports
>> > AHCI controller at 11.0, iobase f024d000, irq 0
>> > AHCI: cap 0xf3309f05, ports_impl 0x3f
>> > /bff50000\ Start thread
>> > |bff50000| AHCI/0: probing
>> > |bff50000| AHCI/0: link up
>> > |bff52000| EHCI init on dev 00:12.2 (regs=0xf024d820)
>> > /bff4f000\ Start thread
>> > /bff4d000\ Start thread
>> > |bff4d000| AHCI/1: probing
>> > |bff50000| AHCI/0: ... finished, status 0x51, ERROR 0x4
>> > |bff52000| EHCI init on dev 00:13.2 (regs=0xf024d920)
>> > /bff4c000\ Start thread
>> > /bff4b000\ Start thread
>> > |bff4b000| AHCI/2: probing
>> > |bff4d000| AHCI/1: link down
>> > |bff52000| OHCI init on dev 00:12.0 (regs=0xf024a000)
>> > /bff4a000\ Start thread
>> > /bff49000\ Start thread
>> > /bff48000\ Start thread
>> > /bff46000\ Start thread
>> > |bff46000| AHCI/3: probing
>> > |bff4b000| AHCI/2: link down
>> > \bff4d000/ End thread
>> > |bff50000| Searching bootorder for: /pci at i0cf8/*@11/drive at 0/disk at 0
>> > |bff52000| OHCI init on dev 00:13.0 (regs=0xf024b000)
>> > /bff4d000\ Start thread
>> > /bff45000\ Start thread
>> > /bff44000\ Start thread
>> > /bff43000\ Start thread
>> > /bff42000\ Start thread
>> > |bff42000| AHCI/4: probing
>> > |bff46000| AHCI/3: link down
>> > \bff4b000/ End thread
>> > |bff50000| AHCI/0: registering: "AHCI/0: ST3250620NS ATA-7 Hard-Disk
>> > (232
>> > GiBytes)"
>> > \bff50000/ End thread
>> > |bff52000| OHCI init on dev 00:14.5 (regs=0xf024c000)
>> > /bff50000\ Start thread
>> > /bff4b000\ Start thread
>> > /bff41000\ Start thread
>> > /bff40000\ Start thread
>> > /bff3f000\ Start thread
>> > |bff3f000| AHCI/5: probing
>> > |bff42000| AHCI/4: link down
>> > \bff46000/ End thread
>> > \bff52000/ End thread
>> > /bff46000\ Start thread
>> > /bff3e000\ Start thread
>> > \bff3e000/ End thread
>> > /bff3e000\ Start thread
>> > /bff3d000\ Start thread
>> > |bff3d000| xhci_hub_reset port #4: 0x000202e1, powered, pls 7, speed 0 [
>> > - ]
>> > |bff3f000| AHCI/5: link down
>> > \bff42000/ End thread
>> > /bff47000\ Start thread
>> > /bff42000\ Start thread
>> > /bff3c000\ Start thread
>> > /bff3b000\ Start thread
>> > \bff3f000/ End thread
>> > /bff3f000\ Start thread
>> > /bff3a000\ Start thread
>> > /bff39000\ Start thread
>> > /bff38000\ Start thread
>> > /bff37000\ Start thread
>> > /bff36000\ Start thread
>> > /bff35000\ Start thread
>> > /bff34000\ Start thread
>> > /bff33000\ Start thread
>> > /bff32000\ Start thread
>> > |bff3d000| XHCI port #4: 0x00200e03, powered, enabled, pls 0, speed 3
>> > [High]
>> > |bff3d000| xhci_alloc_pipe: usbdev 0xbff52f20, ring 0xbff9be00, slotid
>> > 0,
>> > epid 1
>> > |bff3d000| xhci_cmd_enable_slot:
>> > |bff3d000| xhci_trb_queue: ring 0xbff9ed00 [nidx 1, len 0]
>> > |bff3d000| xhci_process_events: status change port #4
>> > |bff3d000| xhci_process_events: status change port #2
>> > |bff3d000| xhci_process_events: status change port #4
>> > |bff3d000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed00, evt
>> > 0xbff9ee00, type 33, eidx 1, cc 1]
>> > |bff3d000| xhci_alloc_pipe: enable slot: got slotid 1
>> > |bff3d000| xhci_cmd_address_device: slotid 1
>> > |bff3d000| xhci_trb_queue: ring 0xbff9ed00 [nidx 2, len 0]
>> > |bff37000| usb_hid_setup 0xbff52a40
>> > |bff37000| USB keyboard initialized
>> > \bff37000/ End thread
>> > \bff3b000/ End thread
>> > \bff3e000/ End thread
>> > \bff41000/ End thread
>> > \bff44000/ End thread
>> > \bff49000/ End thread
>> > \bff40000/ End thread
>> > \bff48000/ End thread
>> > \bff4f000/ End thread
>> > \bff39000/ End thread
>> > \bff3c000/ End thread
>> > \bff4b000/ End thread
>> > \bff45000/ End thread
>> > \bff4c000/ End thread
>> > \bff33000/ End thread
>> > \bff36000/ End thread
>> > \bff3a000/ End thread
>> > \bff42000/ End thread
>> > \bff46000/ End thread
>> > \bff4a000/ End thread
>> > \bff32000/ End thread
>> > \bff34000/ End thread
>> > \bff3f000/ End thread
>> > \bff47000/ End thread
>> > \bff4d000/ End thread
>> > \bff35000/ End thread
>> > \bff38000/ End thread
>> > \bff50000/ End thread
>> > |bff3d000| WARNING - Timeout at xhci_event_wait:692!
>> > |bff3d000| xhci_alloc_pipe: address device: failed (cc -1)
>> > \bff3d000/ End thread
>> > |bff43000| XHCI port #2: 0x00021203, powered, enabled, pls 0, speed 4
>> > [Super]
>> > |bff43000| xhci_alloc_pipe: usbdev 0xbff4efe0, ring 0xbff9e900, slotid
>> > 0,
>> > epid 1
>> > |bff43000| xhci_cmd_enable_slot:
>> > |bff43000| xhci_trb_queue: ring 0xbff9ed00 [nidx 3, len 0]
>> > |bff43000| WARNING - Timeout at xhci_event_wait:692!
>> > |bff43000| xhci_alloc_pipe: enable slot: failed
>> > \bff43000/ End thread
>> > |bff51000| XHCI no devices found
>> > |bff51000| WARNING - Timeout at wait_bit:310!
>> > \bff51000/ End thread
>> > All threads complete.
>> > Scan for option roms
>> > Searching bootorder for: /pci at i0cf8/*@1,1
>> >
>> > Press F12 for boot menu.
>> >
>> > Select boot device:
>> >
>> > 1. AHCI/0: ST3250620NS ATA-7 Hard-Disk (232 GiBytes)
>> > 2. Legacy option rom
>> >
>> > Zheng
>> >
>> >
>> >> Date: Mon, 24 Aug 2015 15:12:13 +0200
>> >> From: vidwer at gmail.com
>> >> To: seabios at seabios.org
>> >> Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
>> >> attached when power up
>> >>
>> >> 2015-08-24 14:19 GMT+02:00 Zheng Bao <fishbaoz at hotmail.com>:
>> >> > Hi,
>> >> > Please review the debug message below.
>> >> >
>> >> > Seabios message if USB3 harddrive is plugged in USB3 port.
>> >> > --------------------------------------------
>> >> > SeaBIOS (version rel-1.7.5-0-ge51488c-dirty-20150824_081102-supersrv)
>> >>
>> >> FWIW, I'm using the version from github master, 1.8.0
>> >>
>> >> > Found coreboot cbmem console @ affde000
>> >> > Found mainboard AMD FP4
>> >> > Relocating init from 0x000e6d99 to 0xaff54770 (size 42948)
>> >> > Found CBFS header at 0xfffffc60
>> >> > CPU Mhz=2101
>> >> > Found 26 PCI devices (max PCI bus is 01)
>> >> > Copying SMBIOS entry point from 0xaffa7000 to 0x000f1540
>> >> > Copying ACPI RSDP from 0xaffb8000 to 0x000f1510
>> >> > Copying MPTABLE from 0xaffdc000/affdc010 to 0x000f1340
>> >> > Copying PIR from 0xaffdd000 to 0x000f1310
>> >> > Using pmtimer, ioport 0x818
>> >> > Scan for VGA option rom
>> >> > Running option rom at c000:0003
>> >> > Turning on vga text mode console
>> >> > SeaBIOS (version rel-1.7.5-0-ge51488c-dirty-20150824_081102-supersrv)
>> >> > /aff51000\ Start thread
>> >> > |aff51000| XHCI init on dev 00:10.0: regs @ 0xf0b8a000, 8 ports, 32
>> >> > slots,
>> >> > 32 byte contexts
>> >> > |aff51000| XHCI extcap 0x1 @ f0b8a500
>> >> > |aff51000| XHCI protocol USB 3.00, 4 ports (offset 1), def 0
>> >> > |aff51000| XHCI protocol USB 2.00, 4 ports (offset 5), def 18
>> >> > |aff51000| XHCI extcap 0xa @ f0b8a540
>> >> > /aff50000\ Start thread
>> >>
>> >> > /aff4f000\ Start thread
>> >> > |aff4f000| WARNING - Timeout at i8042_flush:71!
>> >> > \aff4f000/ End thread
>> >>
>> >> Where does that belong to?
>> >>
>> >> > |aff51000| EHCI init on dev 00:12.0 (regs=0xf0b8d520)
>> >> > /aff4f000\ Start thread
>> >> > /aff4d000\ Start thread
>> >> > Found 0 lpt ports
>> >> > Found 1 serial ports
>> >> > AHCI controller at 11.0, iobase f0b8d000, irq 0
>> >> > AHCI: cap 0xf733ff01, ports_impl 0x3
>> >> > /aff4c000\ Start thread
>> >> > |aff4c000| AHCI/0: probing
>> >> > |aff51000| EHCI init on dev 01:00.4 (regs=0xf0818020)
>> >> > /aff4b000\ Start thread
>> >> > /aff4a000\ Start thread
>> >> > /aff49000\ Start thread
>> >> > /aff47000\ Start thread
>> >> > |aff47000| AHCI/1: probing
>> >> > |aff47000| AHCI/1: link up
>> >> > |aff4c000| AHCI/0: link down
>> >> > |aff47000| AHCI/1: ... finished, status 0x51, ERROR 0x4
>> >> > \aff4c000/ End thread
>> >> > |aff47000| Searching bootorder for: /pci at i0cf8/*@11/drive at 1/disk at 0
>> >> > \aff4a000/ End thread
>> >> > \aff49000/ End thread
>> >> > |aff47000| AHCI/1: registering: "AHCI/1: PLEXTOR PX-128M6G-2280 ATA-8
>> >> > Hard-Disk (119 GiBytes)"
>> >> > \aff47000/ End thread
>> >> > \aff51000/ End thread
>> >> > /aff4c000\ Start thread
>> >> > /aff4a000\ Start thread
>> >> > /aff49000\ Start thread
>> >> > /aff48000\ Start thread
>> >> > /aff47000\ Start thread
>> >> > \aff47000/ End thread
>> >> > /aff47000\ Start thread
>> >> > \aff47000/ End thread
>> >> > /aff47000\ Start thread
>> >> > \aff47000/ End thread
>> >> > /aff47000\ Start thread
>> >> > \aff47000/ End thread
>> >> > /aff47000\ Start thread
>> >> > /aff46000\ Start thread
>> >> > \aff46000/ End thread
>> >> > /aff46000\ Start thread
>> >> > \aff46000/ End thread
>> >> > /aff46000\ Start thread
>> >> > \aff46000/ End thread
>> >> > |aff4a000| usb_hid_setup 0xaff51c50
>> >> > |aff4b000| WARNING - Timeout at ehci_waittick:186!
>> >>
>> >> I haven't seen this before.
>> >>
>> >> > |aff4a000| USB keyboard initialized
>> >> > \aff4a000/ End thread
>> >> > \aff4b000/ End thread
>> >> > |aff47000| WARNING - Timeout at wait_bit:484!
>> >> > \aff47000/ End thread
>> >> > |aff50000| XHCI no devices found
>> >> > \aff50000/ End thread
>> >> > \aff4c000/ End thread
>> >> > \aff48000/ End thread
>> >> > \aff49000/ End thread
>> >> > |aff4d000| Initialized USB HUB (1 ports used)
>> >> > \aff4d000/ End thread
>> >> > \aff4f000/ End thread
>> >> > All threads complete.
>> >> > Scan for option roms
>> >> >
>> >> > Press F12 for boot menu.
>> >> >
>> >> > Select boot device:
>> >> >
>> >> > 1. AHCI/1: PLEXTOR PX-128M6G-2280 ATA-8 Hard-Disk (119 GiBytes
>> >> >
>> >> >
>> >> >
>> >> > Seabios message if USB3 hard drive is plugged in USB2 port.
>> >> > ------------------------------
>> >> > SeaBIOS (version rel-1.7.5-0-ge51488c-dirty-20150824_081102-supersrv)
>> >> > Found coreboot cbmem console @ affde000
>> >> > Found mainboard AMD FP4
>> >> > Relocating init from 0x000e6d99 to 0xaff54770 (size 42948)
>> >> > Found CBFS header at 0xfffffc60
>> >> > CPU Mhz=2100
>> >> > Found 26 PCI devices (max PCI bus is 01)
>> >> > Copying SMBIOS entry point from 0xaffa7000 to 0x000f1540
>> >> > Copying ACPI RSDP from 0xaffb8000 to 0x000f1510
>> >> > Copying MPTABLE from 0xaffdc000/affdc010 to 0x000f1340
>> >> > Copying PIR from 0xaffdd000 to 0x000f1310
>> >> > Using pmtimer, ioport 0x818
>> >> > Scan for VGA option rom
>> >> > Running option rom at c000:0003
>> >> > Turning on vga text mode console
>> >> > SeaBIOS (version rel-1.7.5-0-ge51488c-dirty-20150824_081102-supersrv)
>> >> > /aff51000\ Start thread
>> >> > |aff51000| XHCI init on dev 00:10.0: regs @ 0xf0b8a000, 8 ports, 32
>> >> > slots,
>> >> > 32 byte contexts
>> >> > |aff51000| XHCI extcap 0x1 @ f0b8a500
>> >> > |aff51000| XHCI protocol USB 3.00, 4 ports (offset 1), def 0
>> >> > |aff51000| XHCI protocol USB 2.00, 4 ports (offset 5), def 18
>> >> > |aff51000| XHCI extcap 0xa @ f0b8a540
>> >> > /aff50000\ Start thread
>> >> > /aff4f000\ Start thread
>> >> > |aff4f000| WARNING - Timeout at i8042_flush:71!
>> >> > \aff4f000/ End thread
>> >> > |aff51000| EHCI init on dev 00:12.0 (regs=0xf0b8d520)
>> >> > /aff4f000\ Start thread
>> >> > /aff4d000\ Start thread
>> >> > Found 0 lpt ports
>> >> > Found 1 serial ports
>> >> > AHCI controller at 11.0, iobase f0b8d000, irq 0
>> >> > AHCI: cap 0xf733ff01, ports_impl 0x3
>> >> > /aff4c000\ Start thread
>> >> > |aff4c000| AHCI/0: probing
>> >> > |aff51000| EHCI init on dev 01:00.4 (regs=0xf0818020)
>> >> > /aff4b000\ Start thread
>> >> > /aff4a000\ Start thread
>> >> > /aff49000\ Start thread
>> >> > /aff47000\ Start thread
>> >> > |aff47000| AHCI/1: probing
>> >> > |aff47000| AHCI/1: link up
>> >> > |aff4c000| AHCI/0: link down
>> >> > |aff47000| AHCI/1: ... finished, status 0x51, ERROR 0x4
>> >> > \aff4c000/ End thread
>> >> > |aff47000| Searching bootorder for: /pci at i0cf8/*@11/drive at 1/disk at 0
>> >> > \aff4a000/ End thread
>> >> > \aff49000/ End thread
>> >> > |aff47000| AHCI/1: registering: "AHCI/1: PLEXTOR PX-128M6G-2280 ATA-8
>> >> > Hard-Disk (119 GiBytes)"
>> >> > \aff47000/ End thread
>> >> > \aff51000/ End thread
>> >> > /aff4c000\ Start thread
>> >> > /aff4a000\ Start thread
>> >> > /aff49000\ Start thread
>> >> > /aff48000\ Start thread
>> >> > /aff47000\ Start thread
>> >> > \aff47000/ End thread
>> >> > /aff47000\ Start thread
>> >> > \aff47000/ End thread
>> >> > /aff47000\ Start thread
>> >> > \aff47000/ End thread
>> >> > /aff47000\ Start thread
>> >> > \aff47000/ End thread
>> >> > /aff47000\ Start thread
>> >> > \aff47000/ End thread
>> >> > /aff47000\ Start thread
>> >> > \aff47000/ End thread
>> >> > /aff47000\ Start thread
>> >> > \aff47000/ End thread
>> >> > /aff47000\ Start thread
>> >> > \aff47000/ End thread
>> >> > |aff50000| XHCI no devices found
>> >> > \aff50000/ End thread
>> >> > |aff4b000| WARNING - Timeout at ehci_waittick:186!
>> >> > \aff4b000/ End thread
>> >> > |aff4c000| Searching bootorder for:
>> >> > /pci at i0cf8/usb at 12/hub at 1/storage at 1/*@0/*@0,0
>> >> > |aff4c000| Searching bootorder for: /pci at i0cf8/usb at 12/hub at 1/usb-*@1
>> >> > |aff4c000| USB MSC vendor='Seagate' product='FA GoFlex Pro'
>> >> > rev='0210'
>> >> > type=0 removable=0
>> >> > |aff4c000| USB MSC blksize=512 sectors=976773167
>> >> > \aff4c000/ End thread
>> >> > |aff4a000| usb_hid_setup 0xaff521d0
>> >> > |aff4a000| USB keyboard initialized
>> >> > \aff4a000/ End thread
>> >> > \aff48000/ End thread
>> >> > \aff49000/ End thread
>> >> > |aff4d000| Initialized USB HUB (2 ports used)
>> >> > \aff4d000/ End thread
>> >> > \aff4f000/ End thread
>> >> > All threads complete.
>> >> > Scan for option roms
>> >> >
>> >> > Press F12 for boot menu.
>> >> >
>> >> > Select boot device:
>> >> >
>> >> > 1. AHCI/1: PLEXTOR PX-128M6G-2280 ATA-8 Hard-Disk (119 GiBytes
>> >> > 2. USB MSC Drive Seagate FA GoFlex Pro 0210
>> >> >
>> >> >
>> >> >> Date: Thu, 20 Aug 2015 13:14:54 +0200
>> >> >> From: vidwer at gmail.com
>> >> >> To: seabios at seabios.org
>> >> >
>> >> >> Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
>> >> >> attached when power up
>> >> >>
>> >> >> 2015-08-07 23:21 GMT+02:00 Kevin O'Connor <kevin at koconnor.net>:
>> >> >> > On Thu, Aug 06, 2015 at 11:51:04AM +0000, Zheng Bao wrote:
>> >> >> >> Board: Bettong
>> >> >> >> USB3 controller: Hudson on Carrizo
>> >> >> >> USB3 device: Seagate USB hard drive. That is the only USB 3.0
>> >> >> >> device
>> >> >> >> I
>> >> >> >> can get.
>> >> >> >
>> >> >> > Thanks. The problem looks very similar to one reported in the past
>> >> >> > by
>> >> >> > Idwer. Unfortunately, Idwer also didn't have access to any other
>> >> >> > USB3
>> >> >> > devices - that would have been a great test to see if the quirky
>> >> >> > behavior was due to the controller or due to the device.
>> >> >>
>> >> >> The board I have is an Hudson-D4? board, ASUS F2A85-M with the lspci
>> >> >> ID:
>> >> >> 00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD]
>> >> >> FCH
>> >> >> USB XHCI Controller [1022:7812] (rev 03)
>> >> >> 00:10.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD]
>> >> >> FCH
>> >> >> USB XHCI Controller [1022:7812] (rev 03)
>> >> >>
>> >> >> Zheng, can you recompile SeaBIOS with CONFIG_THREADS=y and
>> >> >> CONFIG_DEBUG_LEVEL=2 and try booting off the superspeed device
>> >> >> you're
>> >> >> using?
>> >> >> The experience I had was that, with those settings, this superspeed
>> >> >> SATA dock showed up in the device menu (press ESCape).
>> >> >>
>> >> >> If that won't make the device show up - be sure to post that
>> >> >> cbmem/console output - change USB_TIME_SIGATT in src/hw/usb.h to at
>> >> >> least 1000.
>> >> >>
>> >> >> HTH,
>> >> >>
>> >> >> Idwer
>> >> >>
>> >> >> >
>> >> >> > Can you provide the output from "lspci", "lsusb", and "lsusb -t".
>> >> >> >
>> >> >> > -Kevin
>> >> >> >
>> >> >> >>
>> >> >> >> Joe
>> >> >> >>
>> >> >> >> > Date: Wed, 5 Aug 2015 06:25:13 -0400
>> >> >> >> > From: kevin at koconnor.net
>> >> >> >> > To: fishbaoz at hotmail.com
>> >> >> >> > CC: seabios at seabios.org
>> >> >> >> > Subject: Re: [SeaBIOS]: USB 3.0 port failed if a USB 3.0 device
>> >> >> >> > is
>> >> >> >> > attached when power up
>> >> >> >> >
>> >> >> >> > On Wed, Aug 05, 2015 at 07:40:50AM +0000, Zheng Bao wrote:
>> >> >> >> > > hi, Kevin,
>> >> >> >> > > I am debugging the coreboot on AMD board.
>> >> >> >> > >
>> >> >> >> > > I found if a device is populated on USB 3.0 port during
>> >> >> >> > > system
>> >> >> >> > > power up, the USB3.0 function fail after OS boot up.
>> >> >> >> > > If a USB 2.0 device is plugged, the port is OK.
>> >> >> >> > > Can you take a look at this?
>> >> >> >> >
>> >> >> >> > What board is this, what USB3 controller is it, and what USB3
>> >> >> >> > device
>> >> >> >> > did the problem occur with? Does the problem occur with
>> >> >> >> > multiple/all
>> >> >> >> > USB3 devices or just one?
>> >> >> >> >
>> >> >> >> > -Kevin
>> >> >> >>
>> >> >>
>> >> >> _______________________________________________
>> >> >> SeaBIOS mailing list
>> >> >> SeaBIOS at seabios.org
>> >> >> http://www.seabios.org/mailman/listinfo/seabios
>> >>
>> >> _______________________________________________
>> >> SeaBIOS mailing list
>> >> SeaBIOS at seabios.org
>> >> http://www.seabios.org/mailman/listinfo/seabios
>> >
>> > _______________________________________________ SeaBIOS mailing list
>> > SeaBIOS at seabios.org http://www.seabios.org/mailman/listinfo/seabios
>> >
>> > _______________________________________________ SeaBIOS mailing list
>> > SeaBIOS at seabios.org http://www.seabios.org/mailman/listinfo/seabios
>> >
>> > _______________________________________________ SeaBIOS mailing list
>> > SeaBIOS at seabios.org http://www.seabios.org/mailman/listinfo/seabios
>> >
>> > _______________________________________________ SeaBIOS mailing list
>> > SeaBIOS at seabios.org http://www.seabios.org/mailman/listinfo/seabios
>>
>> _______________________________________________
>> SeaBIOS mailing list
>> SeaBIOS at seabios.org
>> http://www.seabios.org/mailman/listinfo/seabios

More information about the SeaBIOS mailing list