[SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up (Summary: not final fixed yet)

Zheng Bao fishbaoz at hotmail.com
Sat Sep 5 12:04:56 CET 2015


http://review.coreboot.org/#/c/11376/Only this can be apply to Trinity.

Zheng

> Date: Wed, 2 Sep 2015 17:22:30 +0200
> From: vidwer at gmail.com
> To: seabios at seabios.org
> Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up (Summary: not final fixed yet)
> 
> 2015-08-26 14:33 GMT+02:00 Zheng Bao <fishbaoz at hotmail.com>:
> > Yes. Need test by our validation dept.
> 
> Hello Zheng,
> 
> Is there an estimated turnaround time for changes to be delivered?
> 
> Would the following changesets apply to Trinity?
> http://review.coreboot.org/#/c/11375/
> http://review.coreboot.org/#/c/11376/
> http://review.coreboot.org/#/c/11377/
> 
> Idwer
> 
> >
> >
> >> Date: Wed, 26 Aug 2015 13:55:52 +0200
> >> From: vidwer at gmail.com
> >> To: seabios at seabios.org
> >> Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
> >> attached when power up (Summary: not final fixed yet)
> >
> >>
> >> 2015-08-26 10:02 GMT+02:00 Zheng Bao <fishbaoz at hotmail.com>:
> >> > Changing the AMD register in Coreboot code can only solve the USB3
> >> > problem
> >> > in OS. In SeaBIOS stage, the problem still exists.
> >>
> >> Will you submit a change to AGESA?
> >>
> >> >
> >> > I will start a new thread to describe the problem.
> >> >
> >> > Zheng
> >> >
> >> > ________________________________
> >> > From: fishbaoz at hotmail.com
> >> > To: vidwer at gmail.com; seabios at seabios.org
> >> > Date: Wed, 26 Aug 2015 05:35:12 +0000
> >> > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
> >> > attached
> >> > when power up
> >> >
> >> > Problem solved. It is about a internal register setting.
> >> > Zheng
> >> >
> >> >
> >> > ________________________________
> >> > From: fishbaoz at hotmail.com
> >> > To: vidwer at gmail.com; seabios at seabios.org
> >> > Date: Tue, 25 Aug 2015 12:06:34 +0000
> >> > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
> >> > attached
> >> > when power up
> >> >
> >> > Message after power up. xhci is ok.
> >> > ----------------------------
> >> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv)
> >> > Found coreboot cbmem console @ bffde000
> >> > Found mainboard AMD Parmer
> >> > Relocating init from 0x000e7b40 to 0xbff55050 (size 40688)
> >> > Found CBFS header at 0xfffffc60
> >> > CPU Mhz=2497
> >> > Found 23 PCI devices (max PCI bus is 02)
> >> > Copying SMBIOS entry point from 0xbffa7000 to 0x000f1a10
> >> > Copying ACPI RSDP from 0xbffb8000 to 0x000f19e0
> >> > Copying MPTABLE from 0xbffdc000/bffdc010 to 0x000f17b0
> >> > Copying PIR from 0xbffdd000 to 0x000f1780
> >> > Using pmtimer, ioport 0x818
> >> > Scan for VGA option rom
> >> > Running option rom at c000:0003
> >> > Turning on vga text mode console
> >> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv)
> >> > /bff52000\ Start thread
> >> > |bff52000| XHCI init on dev 00:10.0: regs @ 0xf0248000, 4 ports, 32
> >> > slots,
> >> > 32 byte contexts
> >> > |bff52000| XHCI extcap 0x1 @ f0248500
> >> > |bff52000| XHCI protocol USB 3.00, 2 ports (offset 1), def 0
> >> > |bff52000| XHCI protocol USB 2.00, 2 ports (offset 3), def 0
> >> > /bff51000\ Start thread
> >> > |bff51000| configure_xhci: resetting
> >> > Found 1 serial ports
> >> > AHCI controller at 11.0, iobase f024d000, irq 0
> >> > AHCI: cap 0xf3309f05, ports_impl 0x3f
> >> > /bff50000\ Start thread
> >> > |bff50000| AHCI/0: probing
> >> > |bff52000| EHCI init on dev 00:12.2 (regs=0xf024d820)
> >> > /bff4f000\ Start thread
> >> > /bff4d000\ Start thread
> >> > |bff4d000| AHCI/1: probing
> >> > |bff50000| AHCI/0: link down
> >> > |bff52000| EHCI init on dev 00:13.2 (regs=0xf024d920)
> >> > /bff4c000\ Start thread
> >> > /bff4b000\ Start thread
> >> > |bff4b000| AHCI/2: probing
> >> > |bff4d000| AHCI/1: link down
> >> > \bff50000/ End thread
> >> > |bff52000| OHCI init on dev 00:12.0 (regs=0xf024a000)
> >> > /bff50000\ Start thread
> >> > /bff4a000\ Start thread
> >> > /bff49000\ Start thread
> >> > |bff49000| AHCI/3: probing
> >> > |bff4b000| AHCI/2: link down
> >> > \bff4d000/ End thread
> >> > |bff52000| OHCI init on dev 00:13.0 (regs=0xf024b000)
> >> > /bff4d000\ Start thread
> >> > /bff48000\ Start thread
> >> > /bff47000\ Start thread
> >> > /bff45000\ Start thread
> >> > |bff45000| AHCI/4: probing
> >> > |bff49000| AHCI/3: link down
> >> > \bff4b000/ End thread
> >> > |bff52000| OHCI init on dev 00:14.5 (regs=0xf024c000)
> >> > /bff4b000\ Start thread
> >> > /bff44000\ Start thread
> >> > /bff43000\ Start thread
> >> > /bff42000\ Start thread
> >> > |bff42000| AHCI/5: probing
> >> > |bff45000| AHCI/4: link down
> >> > \bff49000/ End thread
> >> > \bff52000/ End thread
> >> > /bff52000\ Start thread
> >> > \bff52000/ End thread
> >> > /bff52000\ Start thread
> >> > |bff42000| AHCI/5: link down
> >> > \bff45000/ End thread
> >> > /bff49000\ Start thread
> >> > /bff46000\ Start thread
> >> > /bff45000\ Start thread
> >> > \bff42000/ End thread
> >> > /bff42000\ Start thread
> >> > /bff41000\ Start thread
> >> > /bff40000\ Start thread
> >> > /bff3f000\ Start thread
> >> > /bff3e000\ Start thread
> >> > /bff3d000\ Start thread
> >> > /bff3c000\ Start thread
> >> > /bff3b000\ Start thread
> >> > |bff3b000| XHCI port #2: 0x00021203, powered, enabled, pls 0, speed 4
> >> > [Super]
> >> > /bff3a000\ Start thread
> >> > /bff39000\ Start thread
> >> > /bff38000\ Start thread
> >> > /bff37000\ Start thread
> >> > /bff36000\ Start thread
> >> > /bff35000\ Start thread
> >> > |bff3b000| xhci_alloc_pipe: usbdev 0xbff53350, ring 0xbff9e400, slotid
> >> > 0,
> >> > epid 1
> >> > |bff3b000| xhci_cmd_enable_slot:
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9ed00 [nidx 1, len 0]
> >> > |bff3b000| xhci_process_events: status change port #2
> >> > |bff3b000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed00, evt
> >> > 0xbff9ee00, type 33, eidx 1, cc 1]
> >> > |bff3b000| xhci_alloc_pipe: enable slot: got slotid 1
> >> > |bff3b000| xhci_cmd_address_device: slotid 1
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9ed00 [nidx 2, len 0]
> >> > /bff34000\ Start thread
> >> > /bff33000\ Start thread
> >> > |bff3b000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed10, evt
> >> > 0xbff9ee00, type 33, eidx 2, cc 1]
> >> > |bff3b000| xhci_realloc_pipe: usbdev 0xbff53350, ring 0xbff9e400, slotid
> >> > 1,
> >> > epid 1
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 1, len 8]
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 2, len 8]
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 3, len 0]
> >> > |bff3b000| xhci_xfer_kick: ring 0xbff9e400, slotid 1, epid 1
> >> > |bff3b000| xhci_process_events: ring 0xbff9e400 [trb 0xbff9e420, evt
> >> > 0xbff9e500, type 32, eidx 3, cc 1]
> >> > |bff3b000| xhci_realloc_pipe: usbdev 0xbff53350, ring 0xbff9e400, slotid
> >> > 1,
> >> > epid 1
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 4, len 8]
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 5, len 9]
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 6, len 0]
> >> > |bff3b000| xhci_xfer_kick: ring 0xbff9e400, slotid 1, epid 1
> >> > |bff3b000| xhci_process_events: ring 0xbff9e400 [trb 0xbff9e450, evt
> >> > 0xbff9e500, type 32, eidx 6, cc 1]
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 7, len 8]
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 8, len 44]
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 9, len 0]
> >> > |bff3b000| xhci_xfer_kick: ring 0xbff9e400, slotid 1, epid 1
> >> > |bff3b000| xhci_process_events: ring 0xbff9e400 [trb 0xbff9e480, evt
> >> > 0xbff9e500, type 32, eidx 9, cc 1]
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 10, len 8]
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 11, len 0]
> >> > |bff3b000| xhci_xfer_kick: ring 0xbff9e400, slotid 1, epid 1
> >> > |bff3b000| xhci_process_events: ring 0xbff9e400 [trb 0xbff9e4a0, evt
> >> > 0xbff9e500, type 32, eidx 11, cc 1]
> >> > |bff3b000| xhci_alloc_pipe: usbdev 0xbff53350, ring 0x000eee00, slotid
> >> > 0,
> >> > epid 3
> >> > |bff3b000| xhci_cmd_configure_endpoint: slotid 1, add 0x9, del 0x0
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9ed00 [nidx 3, len 0]
> >> > |bff3a000| usb_hid_setup 0xbff4e920
> >> > |bff3b000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed20, evt
> >> > 0xbff9ee00, type 33, eidx 3, cc 1]
> >> > |bff3b000| xhci_alloc_pipe: usbdev 0xbff53350, ring 0x000eec00, slotid
> >> > 0,
> >> > epid 4
> >> > |bff3b000| xhci_cmd_configure_endpoint: slotid 1, add 0x11, del 0x0
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9ed00 [nidx 4, len 0]
> >> > |bff3b000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed30, evt
> >> > 0xbff9ee00, type 33, eidx 4, cc 1]
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 12, len 8]
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 13, len 1]
> >> > |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 14, len 0]
> >> > |bff3b000| xhci_xfer_kick: ring 0xbff9e400, slotid 1, epid 1
> >> > |bff3a000| USB keyboard initialized
> >> > \bff3a000/ End thread
> >> > |bff3b000| xhci_process_events: ring 0xbff9e400 [trb 0xbff9e4d0, evt
> >> > 0xbff9e500, type 32, eidx 14, cc 1]
> >> > |bff3b000| Searching bootorder for:
> >> > /pci at i0cf8/usb at 10/storage at 2/*@0/*@0,0
> >> > |bff3b000| Searching bootorder for: /pci at i0cf8/usb at 10/usb-*@2
> >> > |bff3b000| xhci_trb_queue: ring 0x000eec00 [nidx 1, len 31]
> >> > |bff3b000| xhci_xfer_kick: ring 0x000eec00, slotid 1, epid 4
> >> > |bff3b000| xhci_process_events: ring 0x000eec00 [trb 0x000eec00, evt
> >> > 0x000eed00, type 32, eidx 1, cc 1]
> >> > |bff3b000| xhci_trb_queue: ring 0x000eee00 [nidx 1, len 36]
> >> > |bff3b000| xhci_xfer_kick: ring 0x000eee00, slotid 1, epid 3
> >> > |bff3b000| xhci_process_events: ring 0x000eee00 [trb 0x000eee00, evt
> >> > 0x000eef00, type 32, eidx 1, cc 1]
> >> > |bff3b000| xhci_trb_queue: ring 0x000eee00 [nidx 2, len 13]
> >> > |bff3b000| xhci_xfer_kick: ring 0x000eee00, slotid 1, epid 3
> >> > |bff3b000| xhci_process_events: ring 0x000eee00 [trb 0x000eee10, evt
> >> > 0x000eef00, type 32, eidx 2, cc 1]
> >> > |bff3b000| USB MSC vendor='Seagate' product='FA GoFlex Pro' rev='0210'
> >> > type=0 removable=0
> >> > |bff3b000| xhci_trb_queue: ring 0x000eec00 [nidx 2, len 31]
> >> > |bff3b000| xhci_xfer_kick: ring 0x000eec00, slotid 1, epid 4
> >> > |bff3b000| xhci_process_events: ring 0x000eec00 [trb 0x000eec10, evt
> >> > 0x000eed00, type 32, eidx 2, cc 1]
> >> > |bff3b000| xhci_trb_queue: ring 0x000eee00 [nidx 3, len 13]
> >> > |bff3b000| xhci_xfer_kick: ring 0x000eee00, slotid 1, epid 3
> >> > |bff3b000| xhci_process_events: ring 0x000eee00 [trb 0x000eee20, evt
> >> > 0x000eef00, type 32, eidx 3, cc 1]
> >> > |bff3b000| xhci_trb_queue: ring 0x000eec00 [nidx 3, len 31]
> >> > |bff3b000| xhci_xfer_kick: ring 0x000eec00, slotid 1, epid 4
> >> > |bff3b000| xhci_process_events: ring 0x000eec00 [trb 0x000eec20, evt
> >> > 0x000eed00, type 32, eidx 3, cc 1]
> >> > |bff3b000| xhci_trb_queue: ring 0x000eee00 [nidx 4, len 8]
> >> > |bff3b000| xhci_xfer_kick: ring 0x000eee00, slotid 1, epid 3
> >> > |bff3b000| xhci_process_events: ring 0x000eee00 [trb 0x000eee30, evt
> >> > 0x000eef00, type 32, eidx 4, cc 1]
> >> > |bff3b000| xhci_trb_queue: ring 0x000eee00 [nidx 5, len 13]
> >> > |bff3b000| xhci_xfer_kick: ring 0x000eee00, slotid 1, epid 3
> >> > |bff3b000| xhci_process_events: ring 0x000eee00 [trb 0x000eee40, evt
> >> > 0x000eef00, type 32, eidx 5, cc 1]
> >> > |bff3b000| USB MSC blksize=512 sectors=976773167
> >> > \bff3b000/ End thread
> >> > \bff45000/ End thread
> >> > \bff52000/ End thread
> >> > \bff43000/ End thread
> >> > \bff47000/ End thread
> >> > \bff4a000/ End thread
> >> > \bff4f000/ End thread
> >> > \bff41000/ End thread
> >> > \bff46000/ End thread
> >> > \bff44000/ End thread
> >> > \bff48000/ End thread
> >> > \bff4c000/ End thread
> >> > \bff39000/ End thread
> >> > \bff3c000/ End thread
> >> > \bff3f000/ End thread
> >> > \bff42000/ End thread
> >> > \bff49000/ End thread
> >> > \bff50000/ End thread
> >> > \bff35000/ End thread
> >> > \bff38000/ End thread
> >> > \bff3e000/ End thread
> >> > \bff33000/ End thread
> >> > \bff36000/ End thread
> >> > \bff3d000/ End thread
> >> > \bff40000/ End thread
> >> > \bff51000/ End thread
> >> > \bff4d000/ End thread
> >> > \bff34000/ End thread
> >> > \bff37000/ End thread
> >> > \bff4b000/ End thread
> >> > All threads complete.
> >> > Scan for option roms
> >> > Searching bootorder for: /pci at i0cf8/*@1,1
> >> >
> >> > Press F12 for boot menu.
> >> >
> >> >
> >> > Messge after cold reset. xhci is not ok.
> >> > -------------------------------------------------
> >> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv)
> >> > Found coreboot cbmem console @ bffde000
> >> > Found mainboard AMD Parmer
> >> > Relocating init from 0x000e7b40 to 0xbff55050 (size 40688)
> >> > Found CBFS header at 0xfffffc60
> >> > CPU Mhz=2498
> >> > Found 23 PCI devices (max PCI bus is 02)
> >> > Copying SMBIOS entry point from 0xbffa7000 to 0x000f1a10
> >> > Copying ACPI RSDP from 0xbffb8000 to 0x000f19e0
> >> > Copying MPTABLE from 0xbffdc000/bffdc010 to 0x000f17b0
> >> > Copying PIR from 0xbffdd000 to 0x000f1780
> >> > Using pmtimer, ioport 0x818
> >> > Scan for VGA option rom
> >> > Running option rom at c000:0003
> >> > Turning on vga text mode console
> >> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv)
> >> > /bff52000\ Start thread
> >> > |bff52000| XHCI init on dev 00:10.0: regs @ 0xf0248000, 4 ports, 32
> >> > slots,
> >> > 32 byte contexts
> >> > |bff52000| XHCI extcap 0x1 @ f0248500
> >> > |bff52000| XHCI protocol USB 3.00, 2 ports (offset 1), def 0
> >> > |bff52000| XHCI protocol USB 2.00, 2 ports (offset 3), def 0
> >> > /bff51000\ Start thread
> >> > |bff51000| configure_xhci: resetting
> >> > Found 1 serial ports
> >> > AHCI controller at 11.0, iobase f024d000, irq 0
> >> > AHCI: cap 0xf3309f05, ports_impl 0x3f
> >> > /bff50000\ Start thread
> >> > |bff50000| AHCI/0: probing
> >> > |bff52000| EHCI init on dev 00:12.2 (regs=0xf024d820)
> >> > /bff4f000\ Start thread
> >> > /bff4d000\ Start thread
> >> > |bff4d000| AHCI/1: probing
> >> > |bff50000| AHCI/0: link down
> >> > |bff52000| EHCI init on dev 00:13.2 (regs=0xf024d920)
> >> > /bff4c000\ Start thread
> >> > /bff4b000\ Start thread
> >> > |bff4b000| AHCI/2: probing
> >> > |bff4d000| AHCI/1: link down
> >> > \bff50000/ End thread
> >> > |bff52000| OHCI init on dev 00:12.0 (regs=0xf024a000)
> >> > /bff50000\ Start thread
> >> > /bff4a000\ Start thread
> >> > /bff49000\ Start thread
> >> > /bff47000\ Start thread
> >> > |bff47000| AHCI/3: probing
> >> > |bff4b000| AHCI/2: link down
> >> > \bff4d000/ End thread
> >> > |bff52000| OHCI init on dev 00:13.0 (regs=0xf024b000)
> >> > /bff4d000\ Start thread
> >> > /bff46000\ Start thread
> >> > /bff45000\ Start thread
> >> > /bff44000\ Start thread
> >> > /bff43000\ Start thread
> >> > |bff43000| AHCI/4: probing
> >> > |bff47000| AHCI/3: link down
> >> > \bff4b000/ End thread
> >> > |bff52000| OHCI init on dev 00:14.5 (regs=0xf024c000)
> >> > /bff4b000\ Start thread
> >> > /bff42000\ Start thread
> >> > /bff41000\ Start thread
> >> > /bff40000\ Start thread
> >> > /bff3f000\ Start thread
> >> > |bff3f000| AHCI/5: probing
> >> > |bff43000| AHCI/4: link down
> >> > \bff47000/ End thread
> >> > \bff52000/ End thread
> >> > /bff52000\ Start thread
> >> > \bff52000/ End thread
> >> > /bff52000\ Start thread
> >> > /bff47000\ Start thread
> >> > |bff47000| xhci_hub_reset port #4: 0x000202e1, powered, pls 7, speed 0 [
> >> > - ]
> >> > |bff3f000| AHCI/5: link down
> >> > \bff43000/ End thread
> >> > /bff43000\ Start thread
> >> > /bff3e000\ Start thread
> >> > /bff3d000\ Start thread
> >> > \bff3f000/ End thread
> >> > /bff48000\ Start thread
> >> > /bff3f000\ Start thread
> >> > /bff3c000\ Start thread
> >> > /bff3b000\ Start thread
> >> > /bff3a000\ Start thread
> >> > /bff39000\ Start thread
> >> > /bff38000\ Start thread
> >> > /bff37000\ Start thread
> >> > /bff36000\ Start thread
> >> > /bff35000\ Start thread
> >> > /bff34000\ Start thread
> >> > /bff33000\ Start thread
> >> > |bff47000| XHCI port #4: 0x00200e03, powered, enabled, pls 0, speed 3
> >> > [High]
> >> > |bff47000| xhci_alloc_pipe: usbdev 0xbff538a0, ring 0xbff9e400, slotid
> >> > 0,
> >> > epid 1
> >> > |bff47000| xhci_cmd_enable_slot:
> >> > |bff47000| xhci_trb_queue: ring 0xbff9ed00 [nidx 1, len 0]
> >> > |bff47000| xhci_process_events: status change port #4
> >> > |bff47000| xhci_process_events: status change port #2
> >> > |bff47000| xhci_process_events: status change port #4
> >> > |bff47000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed00, evt
> >> > 0xbff9ee00, type 33, eidx 1, cc 1]
> >> > |bff47000| xhci_alloc_pipe: enable slot: got slotid 1
> >> > |bff47000| xhci_cmd_address_device: slotid 1
> >> > |bff47000| xhci_trb_queue: ring 0xbff9ed00 [nidx 2, len 0]
> >> > |bff38000| usb_hid_setup 0xbff4ec10
> >> > |bff38000| USB keyboard initialized
> >> > \bff38000/ End thread
> >> > \bff3d000/ End thread
> >> > \bff52000/ End thread
> >> > \bff41000/ End thread
> >> > \bff45000/ End thread
> >> > \bff4a000/ End thread
> >> > \bff40000/ End thread
> >> > \bff49000/ End thread
> >> > \bff3c000/ End thread
> >> > \bff3e000/ End thread
> >> > \bff42000/ End thread
> >> > \bff46000/ End thread
> >> > \bff4f000/ End thread
> >> > \bff4c000/ End thread
> >> > \bff34000/ End thread
> >> > \bff37000/ End thread
> >> > \bff3a000/ End thread
> >> > \bff3f000/ End thread
> >> > \bff43000/ End thread
> >> > \bff33000/ End thread
> >> > \bff35000/ End thread
> >> > \bff3b000/ End thread
> >> > \bff48000/ End thread
> >> > \bff36000/ End thread
> >> > \bff39000/ End thread
> >> > \bff50000/ End thread
> >> > \bff4d000/ End thread
> >> > \bff4b000/ End thread
> >> > |bff47000| WARNING - Timeout at xhci_event_wait:692!
> >> > |bff47000| xhci_alloc_pipe: address device: failed (cc -1)
> >> > \bff47000/ End thread
> >> > |bff44000| XHCI port #2: 0x00021203, powered, enabled, pls 0, speed 4
> >> > [Super]
> >> > |bff44000| xhci_alloc_pipe: usbdev 0xbff53250, ring 0xbff9e900, slotid
> >> > 0,
> >> > epid 1
> >> > |bff44000| xhci_cmd_enable_slot:
> >> > |bff44000| xhci_trb_queue: ring 0xbff9ed00 [nidx 3, len 0]
> >> > |bff44000| WARNING - Timeout at xhci_event_wait:692!
> >> > |bff44000| xhci_alloc_pipe: enable slot: failed
> >> > \bff44000/ End thread
> >> > |bff51000| XHCI no devices found
> >> > |bff51000| WARNING - Timeout at wait_bit:310!
> >> > \bff51000/ End thread
> >> > All threads complete.
> >> > Scan for option roms
> >> > Searching bootorder for: /pci at i0cf8/*@1,1
> >> > ---------------------------
> >> >
> >> > ________________________________
> >> > From: fishbaoz at hotmail.com
> >> > To: vidwer at gmail.com; seabios at seabios.org
> >> > Date: Tue, 25 Aug 2015 08:33:00 +0000
> >> > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
> >> > attached
> >> > when power up
> >> >
> >> >
> >> > New finding.
> >> >
> >> > If I cold power up the board, the Hispeed USB harddrive works.
> >> > If I press the reset buttong, it doesn't work.
> >> > I need to unplug and plug the power cable to make it work again.
> >> >
> >> > Do you have any idea about that?
> >> >
> >> > Zheng
> >> >
> >> >
> >> > ________________________________
> >> > From: fishbaoz at hotmail.com
> >> > To: vidwer at gmail.com; seabios at seabios.org
> >> > Date: Tue, 25 Aug 2015 06:11:53 +0000
> >> > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
> >> > attached
> >> > when power up
> >> >
> >> > I tried with Parmer, which I assume is close to ASUS F2A85-M, and got
> >> > the
> >> > same result.
> >> > :(
> >> >
> >> > -----------------------------------
> >> > hudson_enable()
> >> > PCI: 00:10.0 [1022/7812] enabled
> >> > hudson_enable()
> >> > ----------------------------------------------
> >> >
> >> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_015821-supersrv)
> >> > Found coreboot cbmem console @ bffde000
> >> > Found mainboard AMD Parmer
> >> > Relocating init from 0x000e7b40 to 0xbff55050 (size 40688)
> >> > Found CBFS header at 0xfffffc60
> >> > CPU Mhz=2498
> >> > Found 23 PCI devices (max PCI bus is 02)
> >> > Copying SMBIOS entry point from 0xbffa7000 to 0x000f1a10
> >> > Copying ACPI RSDP from 0xbffb8000 to 0x000f19e0
> >> > Copying MPTABLE from 0xbffdc000/bffdc010 to 0x000f17b0
> >> > Copying PIR from 0xbffdd000 to 0x000f1780
> >> > Using pmtimer, ioport 0x818
> >> > Scan for VGA option rom
> >> > Running option rom at c000:0003
> >> > Turning on vga text mode console
> >> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_015821-supersrv)
> >> > /bff52000\ Start thread
> >> > |bff52000| XHCI init on dev 00:10.0: regs @ 0xf0248000, 4 ports, 32
> >> > slots,
> >> > 32 byte contexts
> >> > |bff52000| XHCI extcap 0x1 @ f0248500
> >> > |bff52000| XHCI protocol USB 3.00, 2 ports (offset 1), def 0
> >> > |bff52000| XHCI protocol USB 2.00, 2 ports (offset 3), def 0
> >> > /bff51000\ Start thread
> >> > |bff51000| configure_xhci: resetting
> >> > Found 1 serial ports
> >> > AHCI controller at 11.0, iobase f024d000, irq 0
> >> > AHCI: cap 0xf3309f05, ports_impl 0x3f
> >> > /bff50000\ Start thread
> >> > |bff50000| AHCI/0: probing
> >> > |bff50000| AHCI/0: link up
> >> > |bff52000| EHCI init on dev 00:12.2 (regs=0xf024d820)
> >> > /bff4f000\ Start thread
> >> > /bff4d000\ Start thread
> >> > |bff4d000| AHCI/1: probing
> >> > |bff50000| AHCI/0: ... finished, status 0x51, ERROR 0x4
> >> > |bff52000| EHCI init on dev 00:13.2 (regs=0xf024d920)
> >> > /bff4c000\ Start thread
> >> > /bff4b000\ Start thread
> >> > |bff4b000| AHCI/2: probing
> >> > |bff4d000| AHCI/1: link down
> >> > |bff52000| OHCI init on dev 00:12.0 (regs=0xf024a000)
> >> > /bff4a000\ Start thread
> >> > /bff49000\ Start thread
> >> > /bff48000\ Start thread
> >> > /bff46000\ Start thread
> >> > |bff46000| AHCI/3: probing
> >> > |bff4b000| AHCI/2: link down
> >> > \bff4d000/ End thread
> >> > |bff50000| Searching bootorder for: /pci at i0cf8/*@11/drive at 0/disk at 0
> >> > |bff52000| OHCI init on dev 00:13.0 (regs=0xf024b000)
> >> > /bff4d000\ Start thread
> >> > /bff45000\ Start thread
> >> > /bff44000\ Start thread
> >> > /bff43000\ Start thread
> >> > /bff42000\ Start thread
> >> > |bff42000| AHCI/4: probing
> >> > |bff46000| AHCI/3: link down
> >> > \bff4b000/ End thread
> >> > |bff50000| AHCI/0: registering: "AHCI/0: ST3250620NS ATA-7 Hard-Disk
> >> > (232
> >> > GiBytes)"
> >> > \bff50000/ End thread
> >> > |bff52000| OHCI init on dev 00:14.5 (regs=0xf024c000)
> >> > /bff50000\ Start thread
> >> > /bff4b000\ Start thread
> >> > /bff41000\ Start thread
> >> > /bff40000\ Start thread
> >> > /bff3f000\ Start thread
> >> > |bff3f000| AHCI/5: probing
> >> > |bff42000| AHCI/4: link down
> >> > \bff46000/ End thread
> >> > \bff52000/ End thread
> >> > /bff46000\ Start thread
> >> > /bff3e000\ Start thread
> >> > \bff3e000/ End thread
> >> > /bff3e000\ Start thread
> >> > /bff3d000\ Start thread
> >> > |bff3d000| xhci_hub_reset port #4: 0x000202e1, powered, pls 7, speed 0 [
> >> > - ]
> >> > |bff3f000| AHCI/5: link down
> >> > \bff42000/ End thread
> >> > /bff47000\ Start thread
> >> > /bff42000\ Start thread
> >> > /bff3c000\ Start thread
> >> > /bff3b000\ Start thread
> >> > \bff3f000/ End thread
> >> > /bff3f000\ Start thread
> >> > /bff3a000\ Start thread
> >> > /bff39000\ Start thread
> >> > /bff38000\ Start thread
> >> > /bff37000\ Start thread
> >> > /bff36000\ Start thread
> >> > /bff35000\ Start thread
> >> > /bff34000\ Start thread
> >> > /bff33000\ Start thread
> >> > /bff32000\ Start thread
> >> > |bff3d000| XHCI port #4: 0x00200e03, powered, enabled, pls 0, speed 3
> >> > [High]
> >> > |bff3d000| xhci_alloc_pipe: usbdev 0xbff52f20, ring 0xbff9be00, slotid
> >> > 0,
> >> > epid 1
> >> > |bff3d000| xhci_cmd_enable_slot:
> >> > |bff3d000| xhci_trb_queue: ring 0xbff9ed00 [nidx 1, len 0]
> >> > |bff3d000| xhci_process_events: status change port #4
> >> > |bff3d000| xhci_process_events: status change port #2
> >> > |bff3d000| xhci_process_events: status change port #4
> >> > |bff3d000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed00, evt
> >> > 0xbff9ee00, type 33, eidx 1, cc 1]
> >> > |bff3d000| xhci_alloc_pipe: enable slot: got slotid 1
> >> > |bff3d000| xhci_cmd_address_device: slotid 1
> >> > |bff3d000| xhci_trb_queue: ring 0xbff9ed00 [nidx 2, len 0]
> >> > |bff37000| usb_hid_setup 0xbff52a40
> >> > |bff37000| USB keyboard initialized
> >> > \bff37000/ End thread
> >> > \bff3b000/ End thread
> >> > \bff3e000/ End thread
> >> > \bff41000/ End thread
> >> > \bff44000/ End thread
> >> > \bff49000/ End thread
> >> > \bff40000/ End thread
> >> > \bff48000/ End thread
> >> > \bff4f000/ End thread
> >> > \bff39000/ End thread
> >> > \bff3c000/ End thread
> >> > \bff4b000/ End thread
> >> > \bff45000/ End thread
> >> > \bff4c000/ End thread
> >> > \bff33000/ End thread
> >> > \bff36000/ End thread
> >> > \bff3a000/ End thread
> >> > \bff42000/ End thread
> >> > \bff46000/ End thread
> >> > \bff4a000/ End thread
> >> > \bff32000/ End thread
> >> > \bff34000/ End thread
> >> > \bff3f000/ End thread
> >> > \bff47000/ End thread
> >> > \bff4d000/ End thread
> >> > \bff35000/ End thread
> >> > \bff38000/ End thread
> >> > \bff50000/ End thread
> >> > |bff3d000| WARNING - Timeout at xhci_event_wait:692!
> >> > |bff3d000| xhci_alloc_pipe: address device: failed (cc -1)
> >> > \bff3d000/ End thread
> >> > |bff43000| XHCI port #2: 0x00021203, powered, enabled, pls 0, speed 4
> >> > [Super]
> >> > |bff43000| xhci_alloc_pipe: usbdev 0xbff4efe0, ring 0xbff9e900, slotid
> >> > 0,
> >> > epid 1
> >> > |bff43000| xhci_cmd_enable_slot:
> >> > |bff43000| xhci_trb_queue: ring 0xbff9ed00 [nidx 3, len 0]
> >> > |bff43000| WARNING - Timeout at xhci_event_wait:692!
> >> > |bff43000| xhci_alloc_pipe: enable slot: failed
> >> > \bff43000/ End thread
> >> > |bff51000| XHCI no devices found
> >> > |bff51000| WARNING - Timeout at wait_bit:310!
> >> > \bff51000/ End thread
> >> > All threads complete.
> >> > Scan for option roms
> >> > Searching bootorder for: /pci at i0cf8/*@1,1
> >> >
> >> > Press F12 for boot menu.
> >> >
> >> > Select boot device:
> >> >
> >> > 1. AHCI/0: ST3250620NS ATA-7 Hard-Disk (232 GiBytes)
> >> > 2. Legacy option rom
> >> >
> >> > Zheng
> >> >
> >> >
> >> >> Date: Mon, 24 Aug 2015 15:12:13 +0200
> >> >> From: vidwer at gmail.com
> >> >> To: seabios at seabios.org
> >> >> Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
> >> >> attached when power up
> >> >>
> >> >> 2015-08-24 14:19 GMT+02:00 Zheng Bao <fishbaoz at hotmail.com>:
> >> >> > Hi,
> >> >> > Please review the debug message below.
> >> >> >
> >> >> > Seabios message if USB3 harddrive is plugged in USB3 port.
> >> >> > --------------------------------------------
> >> >> > SeaBIOS (version rel-1.7.5-0-ge51488c-dirty-20150824_081102-supersrv)
> >> >>
> >> >> FWIW, I'm using the version from github master, 1.8.0
> >> >>
> >> >> > Found coreboot cbmem console @ affde000
> >> >> > Found mainboard AMD FP4
> >> >> > Relocating init from 0x000e6d99 to 0xaff54770 (size 42948)
> >> >> > Found CBFS header at 0xfffffc60
> >> >> > CPU Mhz=2101
> >> >> > Found 26 PCI devices (max PCI bus is 01)
> >> >> > Copying SMBIOS entry point from 0xaffa7000 to 0x000f1540
> >> >> > Copying ACPI RSDP from 0xaffb8000 to 0x000f1510
> >> >> > Copying MPTABLE from 0xaffdc000/affdc010 to 0x000f1340
> >> >> > Copying PIR from 0xaffdd000 to 0x000f1310
> >> >> > Using pmtimer, ioport 0x818
> >> >> > Scan for VGA option rom
> >> >> > Running option rom at c000:0003
> >> >> > Turning on vga text mode console
> >> >> > SeaBIOS (version rel-1.7.5-0-ge51488c-dirty-20150824_081102-supersrv)
> >> >> > /aff51000\ Start thread
> >> >> > |aff51000| XHCI init on dev 00:10.0: regs @ 0xf0b8a000, 8 ports, 32
> >> >> > slots,
> >> >> > 32 byte contexts
> >> >> > |aff51000| XHCI extcap 0x1 @ f0b8a500
> >> >> > |aff51000| XHCI protocol USB 3.00, 4 ports (offset 1), def 0
> >> >> > |aff51000| XHCI protocol USB 2.00, 4 ports (offset 5), def 18
> >> >> > |aff51000| XHCI extcap 0xa @ f0b8a540
> >> >> > /aff50000\ Start thread
> >> >>
> >> >> > /aff4f000\ Start thread
> >> >> > |aff4f000| WARNING - Timeout at i8042_flush:71!
> >> >> > \aff4f000/ End thread
> >> >>
> >> >> Where does that belong to?
> >> >>
> >> >> > |aff51000| EHCI init on dev 00:12.0 (regs=0xf0b8d520)
> >> >> > /aff4f000\ Start thread
> >> >> > /aff4d000\ Start thread
> >> >> > Found 0 lpt ports
> >> >> > Found 1 serial ports
> >> >> > AHCI controller at 11.0, iobase f0b8d000, irq 0
> >> >> > AHCI: cap 0xf733ff01, ports_impl 0x3
> >> >> > /aff4c000\ Start thread
> >> >> > |aff4c000| AHCI/0: probing
> >> >> > |aff51000| EHCI init on dev 01:00.4 (regs=0xf0818020)
> >> >> > /aff4b000\ Start thread
> >> >> > /aff4a000\ Start thread
> >> >> > /aff49000\ Start thread
> >> >> > /aff47000\ Start thread
> >> >> > |aff47000| AHCI/1: probing
> >> >> > |aff47000| AHCI/1: link up
> >> >> > |aff4c000| AHCI/0: link down
> >> >> > |aff47000| AHCI/1: ... finished, status 0x51, ERROR 0x4
> >> >> > \aff4c000/ End thread
> >> >> > |aff47000| Searching bootorder for: /pci at i0cf8/*@11/drive at 1/disk at 0
> >> >> > \aff4a000/ End thread
> >> >> > \aff49000/ End thread
> >> >> > |aff47000| AHCI/1: registering: "AHCI/1: PLEXTOR PX-128M6G-2280 ATA-8
> >> >> > Hard-Disk (119 GiBytes)"
> >> >> > \aff47000/ End thread
> >> >> > \aff51000/ End thread
> >> >> > /aff4c000\ Start thread
> >> >> > /aff4a000\ Start thread
> >> >> > /aff49000\ Start thread
> >> >> > /aff48000\ Start thread
> >> >> > /aff47000\ Start thread
> >> >> > \aff47000/ End thread
> >> >> > /aff47000\ Start thread
> >> >> > \aff47000/ End thread
> >> >> > /aff47000\ Start thread
> >> >> > \aff47000/ End thread
> >> >> > /aff47000\ Start thread
> >> >> > \aff47000/ End thread
> >> >> > /aff47000\ Start thread
> >> >> > /aff46000\ Start thread
> >> >> > \aff46000/ End thread
> >> >> > /aff46000\ Start thread
> >> >> > \aff46000/ End thread
> >> >> > /aff46000\ Start thread
> >> >> > \aff46000/ End thread
> >> >> > |aff4a000| usb_hid_setup 0xaff51c50
> >> >> > |aff4b000| WARNING - Timeout at ehci_waittick:186!
> >> >>
> >> >> I haven't seen this before.
> >> >>
> >> >> > |aff4a000| USB keyboard initialized
> >> >> > \aff4a000/ End thread
> >> >> > \aff4b000/ End thread
> >> >> > |aff47000| WARNING - Timeout at wait_bit:484!
> >> >> > \aff47000/ End thread
> >> >> > |aff50000| XHCI no devices found
> >> >> > \aff50000/ End thread
> >> >> > \aff4c000/ End thread
> >> >> > \aff48000/ End thread
> >> >> > \aff49000/ End thread
> >> >> > |aff4d000| Initialized USB HUB (1 ports used)
> >> >> > \aff4d000/ End thread
> >> >> > \aff4f000/ End thread
> >> >> > All threads complete.
> >> >> > Scan for option roms
> >> >> >
> >> >> > Press F12 for boot menu.
> >> >> >
> >> >> > Select boot device:
> >> >> >
> >> >> > 1. AHCI/1: PLEXTOR PX-128M6G-2280 ATA-8 Hard-Disk (119 GiBytes
> >> >> >
> >> >> >
> >> >> >
> >> >> > Seabios message if USB3 hard drive is plugged in USB2 port.
> >> >> > ------------------------------
> >> >> > SeaBIOS (version rel-1.7.5-0-ge51488c-dirty-20150824_081102-supersrv)
> >> >> > Found coreboot cbmem console @ affde000
> >> >> > Found mainboard AMD FP4
> >> >> > Relocating init from 0x000e6d99 to 0xaff54770 (size 42948)
> >> >> > Found CBFS header at 0xfffffc60
> >> >> > CPU Mhz=2100
> >> >> > Found 26 PCI devices (max PCI bus is 01)
> >> >> > Copying SMBIOS entry point from 0xaffa7000 to 0x000f1540
> >> >> > Copying ACPI RSDP from 0xaffb8000 to 0x000f1510
> >> >> > Copying MPTABLE from 0xaffdc000/affdc010 to 0x000f1340
> >> >> > Copying PIR from 0xaffdd000 to 0x000f1310
> >> >> > Using pmtimer, ioport 0x818
> >> >> > Scan for VGA option rom
> >> >> > Running option rom at c000:0003
> >> >> > Turning on vga text mode console
> >> >> > SeaBIOS (version rel-1.7.5-0-ge51488c-dirty-20150824_081102-supersrv)
> >> >> > /aff51000\ Start thread
> >> >> > |aff51000| XHCI init on dev 00:10.0: regs @ 0xf0b8a000, 8 ports, 32
> >> >> > slots,
> >> >> > 32 byte contexts
> >> >> > |aff51000| XHCI extcap 0x1 @ f0b8a500
> >> >> > |aff51000| XHCI protocol USB 3.00, 4 ports (offset 1), def 0
> >> >> > |aff51000| XHCI protocol USB 2.00, 4 ports (offset 5), def 18
> >> >> > |aff51000| XHCI extcap 0xa @ f0b8a540
> >> >> > /aff50000\ Start thread
> >> >> > /aff4f000\ Start thread
> >> >> > |aff4f000| WARNING - Timeout at i8042_flush:71!
> >> >> > \aff4f000/ End thread
> >> >> > |aff51000| EHCI init on dev 00:12.0 (regs=0xf0b8d520)
> >> >> > /aff4f000\ Start thread
> >> >> > /aff4d000\ Start thread
> >> >> > Found 0 lpt ports
> >> >> > Found 1 serial ports
> >> >> > AHCI controller at 11.0, iobase f0b8d000, irq 0
> >> >> > AHCI: cap 0xf733ff01, ports_impl 0x3
> >> >> > /aff4c000\ Start thread
> >> >> > |aff4c000| AHCI/0: probing
> >> >> > |aff51000| EHCI init on dev 01:00.4 (regs=0xf0818020)
> >> >> > /aff4b000\ Start thread
> >> >> > /aff4a000\ Start thread
> >> >> > /aff49000\ Start thread
> >> >> > /aff47000\ Start thread
> >> >> > |aff47000| AHCI/1: probing
> >> >> > |aff47000| AHCI/1: link up
> >> >> > |aff4c000| AHCI/0: link down
> >> >> > |aff47000| AHCI/1: ... finished, status 0x51, ERROR 0x4
> >> >> > \aff4c000/ End thread
> >> >> > |aff47000| Searching bootorder for: /pci at i0cf8/*@11/drive at 1/disk at 0
> >> >> > \aff4a000/ End thread
> >> >> > \aff49000/ End thread
> >> >> > |aff47000| AHCI/1: registering: "AHCI/1: PLEXTOR PX-128M6G-2280 ATA-8
> >> >> > Hard-Disk (119 GiBytes)"
> >> >> > \aff47000/ End thread
> >> >> > \aff51000/ End thread
> >> >> > /aff4c000\ Start thread
> >> >> > /aff4a000\ Start thread
> >> >> > /aff49000\ Start thread
> >> >> > /aff48000\ Start thread
> >> >> > /aff47000\ Start thread
> >> >> > \aff47000/ End thread
> >> >> > /aff47000\ Start thread
> >> >> > \aff47000/ End thread
> >> >> > /aff47000\ Start thread
> >> >> > \aff47000/ End thread
> >> >> > /aff47000\ Start thread
> >> >> > \aff47000/ End thread
> >> >> > /aff47000\ Start thread
> >> >> > \aff47000/ End thread
> >> >> > /aff47000\ Start thread
> >> >> > \aff47000/ End thread
> >> >> > /aff47000\ Start thread
> >> >> > \aff47000/ End thread
> >> >> > /aff47000\ Start thread
> >> >> > \aff47000/ End thread
> >> >> > |aff50000| XHCI no devices found
> >> >> > \aff50000/ End thread
> >> >> > |aff4b000| WARNING - Timeout at ehci_waittick:186!
> >> >> > \aff4b000/ End thread
> >> >> > |aff4c000| Searching bootorder for:
> >> >> > /pci at i0cf8/usb at 12/hub at 1/storage at 1/*@0/*@0,0
> >> >> > |aff4c000| Searching bootorder for: /pci at i0cf8/usb at 12/hub at 1/usb-*@1
> >> >> > |aff4c000| USB MSC vendor='Seagate' product='FA GoFlex Pro'
> >> >> > rev='0210'
> >> >> > type=0 removable=0
> >> >> > |aff4c000| USB MSC blksize=512 sectors=976773167
> >> >> > \aff4c000/ End thread
> >> >> > |aff4a000| usb_hid_setup 0xaff521d0
> >> >> > |aff4a000| USB keyboard initialized
> >> >> > \aff4a000/ End thread
> >> >> > \aff48000/ End thread
> >> >> > \aff49000/ End thread
> >> >> > |aff4d000| Initialized USB HUB (2 ports used)
> >> >> > \aff4d000/ End thread
> >> >> > \aff4f000/ End thread
> >> >> > All threads complete.
> >> >> > Scan for option roms
> >> >> >
> >> >> > Press F12 for boot menu.
> >> >> >
> >> >> > Select boot device:
> >> >> >
> >> >> > 1. AHCI/1: PLEXTOR PX-128M6G-2280 ATA-8 Hard-Disk (119 GiBytes
> >> >> > 2. USB MSC Drive Seagate FA GoFlex Pro 0210
> >> >> >
> >> >> >
> >> >> >> Date: Thu, 20 Aug 2015 13:14:54 +0200
> >> >> >> From: vidwer at gmail.com
> >> >> >> To: seabios at seabios.org
> >> >> >
> >> >> >> Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is
> >> >> >> attached when power up
> >> >> >>
> >> >> >> 2015-08-07 23:21 GMT+02:00 Kevin O'Connor <kevin at koconnor.net>:
> >> >> >> > On Thu, Aug 06, 2015 at 11:51:04AM +0000, Zheng Bao wrote:
> >> >> >> >> Board: Bettong
> >> >> >> >> USB3 controller: Hudson on Carrizo
> >> >> >> >> USB3 device: Seagate USB hard drive. That is the only USB 3.0
> >> >> >> >> device
> >> >> >> >> I
> >> >> >> >> can get.
> >> >> >> >
> >> >> >> > Thanks. The problem looks very similar to one reported in the past
> >> >> >> > by
> >> >> >> > Idwer. Unfortunately, Idwer also didn't have access to any other
> >> >> >> > USB3
> >> >> >> > devices - that would have been a great test to see if the quirky
> >> >> >> > behavior was due to the controller or due to the device.
> >> >> >>
> >> >> >> The board I have is an Hudson-D4? board, ASUS F2A85-M with the lspci
> >> >> >> ID:
> >> >> >> 00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD]
> >> >> >> FCH
> >> >> >> USB XHCI Controller [1022:7812] (rev 03)
> >> >> >> 00:10.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD]
> >> >> >> FCH
> >> >> >> USB XHCI Controller [1022:7812] (rev 03)
> >> >> >>
> >> >> >> Zheng, can you recompile SeaBIOS with CONFIG_THREADS=y and
> >> >> >> CONFIG_DEBUG_LEVEL=2 and try booting off the superspeed device
> >> >> >> you're
> >> >> >> using?
> >> >> >> The experience I had was that, with those settings, this superspeed
> >> >> >> SATA dock showed up in the device menu (press ESCape).
> >> >> >>
> >> >> >> If that won't make the device show up - be sure to post that
> >> >> >> cbmem/console output - change USB_TIME_SIGATT in src/hw/usb.h to at
> >> >> >> least 1000.
> >> >> >>
> >> >> >> HTH,
> >> >> >>
> >> >> >> Idwer
> >> >> >>
> >> >> >> >
> >> >> >> > Can you provide the output from "lspci", "lsusb", and "lsusb -t".
> >> >> >> >
> >> >> >> > -Kevin
> >> >> >> >
> >> >> >> >>
> >> >> >> >> Joe
> >> >> >> >>
> >> >> >> >> > Date: Wed, 5 Aug 2015 06:25:13 -0400
> >> >> >> >> > From: kevin at koconnor.net
> >> >> >> >> > To: fishbaoz at hotmail.com
> >> >> >> >> > CC: seabios at seabios.org
> >> >> >> >> > Subject: Re: [SeaBIOS]: USB 3.0 port failed if a USB 3.0 device
> >> >> >> >> > is
> >> >> >> >> > attached when power up
> >> >> >> >> >
> >> >> >> >> > On Wed, Aug 05, 2015 at 07:40:50AM +0000, Zheng Bao wrote:
> >> >> >> >> > > hi, Kevin,
> >> >> >> >> > > I am debugging the coreboot on AMD board.
> >> >> >> >> > >
> >> >> >> >> > > I found if a device is populated on USB 3.0 port during
> >> >> >> >> > > system
> >> >> >> >> > > power up, the USB3.0 function fail after OS boot up.
> >> >> >> >> > > If a USB 2.0 device is plugged, the port is OK.
> >> >> >> >> > > Can you take a look at this?
> >> >> >> >> >
> >> >> >> >> > What board is this, what USB3 controller is it, and what USB3
> >> >> >> >> > device
> >> >> >> >> > did the problem occur with? Does the problem occur with
> >> >> >> >> > multiple/all
> >> >> >> >> > USB3 devices or just one?
> >> >> >> >> >
> >> >> >> >> > -Kevin
> >> >> >> >>
> >> >> >>
> >> >> >> _______________________________________________
> >> >> >> SeaBIOS mailing list
> >> >> >> SeaBIOS at seabios.org
> >> >> >> http://www.seabios.org/mailman/listinfo/seabios
> >> >>
> >> >> _______________________________________________
> >> >> SeaBIOS mailing list
> >> >> SeaBIOS at seabios.org
> >> >> http://www.seabios.org/mailman/listinfo/seabios
> >> >
> >> > _______________________________________________ SeaBIOS mailing list
> >> > SeaBIOS at seabios.org http://www.seabios.org/mailman/listinfo/seabios
> >> >
> >> > _______________________________________________ SeaBIOS mailing list
> >> > SeaBIOS at seabios.org http://www.seabios.org/mailman/listinfo/seabios
> >> >
> >> > _______________________________________________ SeaBIOS mailing list
> >> > SeaBIOS at seabios.org http://www.seabios.org/mailman/listinfo/seabios
> >> >
> >> > _______________________________________________ SeaBIOS mailing list
> >> > SeaBIOS at seabios.org http://www.seabios.org/mailman/listinfo/seabios
> >>
> >> _______________________________________________
> >> SeaBIOS mailing list
> >> SeaBIOS at seabios.org
> >> http://www.seabios.org/mailman/listinfo/seabios
> 
> _______________________________________________
> SeaBIOS mailing list
> SeaBIOS at seabios.org
> http://www.seabios.org/mailman/listinfo/seabios
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.seabios.org/pipermail/seabios/attachments/20150905/8c001ad8/attachment-0001.html>


More information about the SeaBIOS mailing list