[flashrom] [RFC] flashrom 0.9.4 plans (ck804 situation)

[Carl-Daniel Hailfinger]

Am 20.07.2011 15:31 schrieb Stefan Tauner:
> i have applied what i think is the minimum solution that should be done
> for a stable release (i.e. 0.9.4) to my tested stuff branch (attached
> as independent patch).
> - mark the EP-8NPA7I as not working in print.c and add a comment
>   pointing to jonathan's patch.
> - add the EP-9NPA7I to print.c like the EP-8NPA7I (epox hp is dead btw)
> - add the P5N-E SLI to print.c including a note mentioning the patch
>   and the need for a board enable.
> - add dmi matching to the EP-8NPA7I board enable and mark it as NT...
>   there is no "not working" flag, because we usually do not include not
>   working board enables in the first place :) i dont want to remove it
>   altogether now though and have added a comment instead that also
>   points to jonathan's patch. ok?
>
>   
> From: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
> Date: Wed, 20 Jul 2011 15:29:43 +0200
> Subject: [PATCH] mark some ck804 boards as not working
>
> P5N-E SLI, EP-8NPA7I and EP-9NPA7I all need at least this patch:
> http://patchwork.coreboot.org/patch/2125/
> mark them as not working until it is merged.
>
> Signed-off-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
>   

Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>

Can you commit all changesets in your tested stuff branch? Thanks!

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/