[flashrom] [RFC] flashrom 0.9.4 plans (ck804 situation)

[Stefan Tauner]

On Sat, 23 Jul 2011 23:58:13 +0200
Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net> wrote:

> Am 20.07.2011 15:31 schrieb Stefan Tauner:
> > i have applied what i think is the minimum solution that should be done
> > for a stable release (i.e. 0.9.4) to my tested stuff branch (attached
> > as independent patch).
> > - mark the EP-8NPA7I as not working in print.c and add a comment
> >   pointing to jonathan's patch.
> > - add the EP-9NPA7I to print.c like the EP-8NPA7I (epox hp is dead btw)
> > - add the P5N-E SLI to print.c including a note mentioning the patch
> >   and the need for a board enable.
> > - add dmi matching to the EP-8NPA7I board enable and mark it as NT...
> >   there is no "not working" flag, because we usually do not include not
> >   working board enables in the first place :) i dont want to remove it
> >   altogether now though and have added a comment instead that also
> >   points to jonathan's patch. ok?
> >
> >   
> > From: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
> > Date: Wed, 20 Jul 2011 15:29:43 +0200
> > Subject: [PATCH] mark some ck804 boards as not working
> >
> > P5N-E SLI, EP-8NPA7I and EP-9NPA7I all need at least this patch:
> > http://patchwork.coreboot.org/patch/2125/
> > mark them as not working until it is merged.
> >
> > Signed-off-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
> >   
> 
> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>

thanks, r1382

> Can you commit all changesets in your tested stuff branch? Thanks!

see IRC

-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner