[flashrom] Tyan S2915-E flash detection problem (HP board)
Phil
i15 at ornl.gov
Thu Jan 21 01:07:23 CET 2010
here's my data....sorry! PHiL
> flashrom v0.9.1-r877
> No coreboot table found.
> DMI string 0: "Tyan Computer Corporation "
> DMI string 1: "MCP55 "
> DMI string 2: "REFERENCE"
> DMI string 3: "Tyan Computer Corporation "
> DMI string 4: "S2915 "
> DMI string 5: "REFERENCE"
> Found chipset "NVIDIA MCP55", enabling flash write... OK.
> This chipset supports the following protocols: Non-SPI.
> Calibrating delay loop... 554M loops per second, 100 myus = 202 us. OK.
> Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x5b, id2 0xfb
> Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing
> information, using default 10mS/40uS. probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x00, id2
> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x5b, id2
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x4e, id2
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x00, id2
> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x4e, id2
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x4e,
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x4e,
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x4e,
> id2 0x50
> Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x4e,
> id2 0x50
> Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x5b,
> id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x5b,
> id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x5b, id2 0xfb
> Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x5b, id2 0xfb
> Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0x4e, id2 0x41
> Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for PMC Pm29F002T, 256 KB: probe_29f040b: id1 0x5d, id2 0x58
> Probing for PMC Pm29F002B, 256 KB: probe_29f040b: id1 0x5d, id2 0x58
> Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x5b, id2
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x4e, id2
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x4e, id2 0x41
> Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x5b, id2
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x5b, id2
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x5b, id2
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x4e, id2
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x00, id2
> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x5b, id2
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x4e, id2
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x0d,
> id2 0xd6, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x4e,
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x4e, id2 0x41
> Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x4e, id2
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x4e, id2
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing
> information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip
> bus type SPI are incompatible.
> Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip
> bus type SPI are incompatible.
> Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
> Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x5b, id2
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x4e, id2
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing
> information, using default 10mS/40uS. probe_jedec_common: id1 0x4e,
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing
> information, using default 10mS/40uS. probe_jedec_common: id1 0x4e,
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing
> information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing
> information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x5d, id2 0x58
> Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50LPW116, 2048 KB: probe_jedec_common: id1 0xff, id2
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x4e,
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x5b,
> id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x4e,
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x5d, id2
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and
> chip bus type SPI are incompatible.
> Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI
> and chip bus type SPI are incompatible.
> Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x5b, id2
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x4e,
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond
> W29EE011 because the probing sequence puts the AMIC A49LF040A in a
> funky state. Use 'flashrom -c W29EE011' if you have a board with this
> chip.
> Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x4e,
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x4e,
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing
> information, using default 10mS/40uS. probe_jedec_common: id1 0x4e,
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x4e,
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x5d,
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe
> timing information, using default 10mS/40uS. probe_jedec_common: id1
> 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2
> is normal flash content
> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct
> probe timing information, using default 10mS/40uS. probe_jedec_common:
> id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content,
> id2 is normal flash content
> Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host
> bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus
> type Non-SPI and chip bus type SPI are incompatible.
> Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus
> type Non-SPI and chip bus type SPI are incompatible.
> No EEPROM/flash device found.
> If you know which flash chip you have, and if this version of flashrom
> supports a similar flash chip, you can try to force read your chip. Run:
> flashrom -f -r -c similar_supported_flash_chip filename
>
> Note: flashrom can never write when the flash chip isn't found
> automatically.
> 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller
> [10de:0369] (rev a2)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [44] HyperTransport: Slave or Primary Interface
> Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC-
> TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+
> TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut-
> LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 1.03
> Link Frequency 0: 1.0GHz
> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+
> 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT-
> 64bA- UIDRD-
> Link Frequency 1: 200MHz
> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz-
> 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE-
> CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
> Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> 00: de 10 69 03 06 00 b0 00 a2 00 00 05 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
> 40: f1 10 15 29 08 dc e0 01 22 20 11 11 d0 00 00 00
> 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 0a 00
> 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
> 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
> 90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
> c0: 02 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
> e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge
> [10de:0364] (rev a3)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Region 0: I/O ports at 1c00 [size=128]
> 00: de 10 64 03 0f 00 a0 00 a3 00 01 06 00 00 80 00
> 10: 01 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: f1 10 15 29 00 00 d0 fe fa 3e ff 00 fa 3e ff 00
> 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
> 70: 10 00 ff ff c5 80 00 00 00 00 44 19 0d 40 20 10
> 80: 09 20 00 8c 1d 83 00 60 f0 00 00 00 ff 00 00 00
> 90: 00 08 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
> a0: 03 00 10 11 05 43 00 00 00 06 8f 06 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 44 00 00 fe fd 03 00 a0
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 255
> Region 0: I/O ports at 3000 [size=64]
> Region 4: I/O ports at 3440 [size=64]
> Region 5: I/O ports at 3400 [size=64]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: nForce2_smbus
> 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
> 10: 01 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 41 34 00 00 01 34 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
> 40: f1 10 15 29 01 00 02 c0 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 00 00
> 70: 01 00 00 00 00 00 04 a0 00 00 00 00 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 64 15 05 00 a5 03 50 07 80 30 80 00 77 44 44 11
> f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
>
> 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller
> [10de:036c] (rev a1) (prog-if 10 [OHCI])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 21
> Region 0: Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ohci_hcd
> 00: de 10 6c 03 07 00 b0 00 a1 10 03 0c 00 00 80 00
> 10: 00 40 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01
> 40: f1 10 15 29 01 00 02 fe 00 00 00 00 00 00 00 00
> 50: 04 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller
> [10de:036d] (rev a2) (prog-if 20 [EHCI])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin B routed to IRQ 22
> Region 0: Memory at a0005000 (32-bit, non-prefetchable)
> [size=256]
> Capabilities: [44] Debug port: BAR=1 offset=0098
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
> Kernel driver in use: ehci_hcd
> 00: de 10 6d 03 06 00 b0 00 a2 20 03 0c 00 00 80 00
> 10: 00 50 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 03 01
> 40: f1 10 15 29 0a 80 98 20 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
> 70: 00 00 08 00 00 10 20 80 89 3d b6 22 77 25 f4 00
> 80: 01 00 02 fe 00 80 00 00 00 00 00 00 15 16 00 00
> 90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 01 00 00 01 00 00 08 80 00 00 00 00 00 00 00 00
> b0: 00 11 22 33 44 00 00 00 ff 03 00 00 00 00 00 00
> c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e]
> (rev a1) (prog-if 8a [Master SecP PriP])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Region 0: [virtual] Memory at 000001f0 (32-bit,
> non-prefetchable) [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3,
> non-prefetchable) [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit,
> non-prefetchable) [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3,
> non-prefetchable) [size=1]
> Region 4: I/O ports at 3480 [size=16]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pata_amd
> 00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 81 34 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
> 40: f1 10 15 29 01 00 02 00 00 00 00 00 00 00 00 00
> 50: 02 f0 00 00 00 00 00 00 99 99 99 20 2a 00 a8 20
> 60: 00 00 00 c5 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 c0 34 33 00 00 04 1c 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 12 00 00 00 00 00 00 00
>
> 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
> [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 20
> Region 0: I/O ports at 34d0 [size=8]
> Region 1: I/O ports at 34c4 [size=4]
> Region 2: I/O ports at 34c8 [size=8]
> Region 3: I/O ports at 34c0 [size=4]
> Region 4: I/O ports at 3490 [size=16]
> Region 5: Memory at a0006000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: d1 34 00 00 c5 34 00 00 c9 34 00 00 c1 34 00 00
> 20: 91 34 00 00 00 60 00 a0 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 07 01 03 01
> 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 fe ff ff ff 00 00 ce 23 ff df ef ff
> 90: 00 00 ff 3f 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 23 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 0f 00 20 00
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 01 24 e0 00
> f0: 00 00 00 00 00 00 00 00 02 00 0c 00 00 00 00 00
>
> 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
> [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin B routed to IRQ 19
> Region 0: I/O ports at 34e8 [size=8]
> Region 1: I/O ports at 34dc [size=4]
> Region 2: I/O ports at 34e0 [size=8]
> Region 3: I/O ports at 34d8 [size=4]
> Region 4: I/O ports at 34a0 [size=16]
> Region 5: Memory at a0007000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: e9 34 00 00 dd 34 00 00 e1 34 00 00 d9 34 00 00
> 20: a1 34 00 00 00 70 00 a0 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01
> 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 ef ff ff ff 00 00 05 12 bf ff ff fd
> 90: 00 00 bb 34 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 80 00
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 80 07
> f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00
>
> 00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
> [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin C routed to IRQ 18
> Region 0: I/O ports at 3800 [size=8]
> Region 1: I/O ports at 34f4 [size=4]
> Region 2: I/O ports at 34f8 [size=8]
> Region 3: I/O ports at 34f0 [size=4]
> Region 4: I/O ports at 34b0 [size=16]
> Region 5: Memory at a0008000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: 01 38 00 00 f5 34 00 00 f9 34 00 00 f1 34 00 00
> 20: b1 34 00 00 00 80 00 a0 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 03 01
> 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 fb ff ff ed 00 00 bf 0e bf ff 67 ff
> 90: 00 00 45 29 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 a0 07
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 90 02
> f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00
>
> 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge
> [10de:0370] (rev a2) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: a0100000-a01fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
> Capabilities: [b8] Subsystem: nVidia Corporation Device
> [10de:cb84]
> Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
> Mapping Address Base: 00000000fee00000
> 00: de 10 70 03 07 00 b0 00 a2 01 04 06 00 00 81 00
> 10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 80 02
> 20: 10 a0 10 a0 f0 ff 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 04 0a
> 40: 00 00 33 07 01 00 02 00 05 00 00 00 00 00 44 00
> 50: 00 00 fe 8f 00 00 00 00 ff 1f ff 1f 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 fe 6f 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 a8
> 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb
> c0: de 10 84 cb 07 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition
> Audio [10de:0371] (rev a2)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (500ns min, 1250ns max)
> Interrupt: pin B routed to IRQ 20
> Region 0: Memory at a0000000 (32-bit, non-prefetchable)
> [size=16K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: HDA Intel
> 00: de 10 71 03 06 00 b0 00 a2 00 03 04 00 00 80 00
> 10: 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 02 05
> 40: f1 10 15 29 01 50 02 c0 00 00 00 00 01 01 0f 00
> 50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 03 a8
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 47 00 29 00 00 00 00 00 00
>
> 00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373]
> (rev a3)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (250ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 52
> Region 0: Memory at a0009000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 3808 [size=8]
> Region 2: Memory at a0005800 (32-bit, non-prefetchable)
> [size=256]
> Region 3: Memory at a0005400 (32-bit, non-prefetchable) [size=16]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
> Capabilities: [70] MSI-X: Enable- Count=8 Masked-
> Vector table: BAR=2 offset=00000000
> PBA: BAR=3 offset=00000000
> Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
> Address: 00000000fee0f00c Data: 41b1
> Masking: 000000fe Pending: 00000000
> Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: forcedeth
> 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
> 10: 00 90 00 a0 09 38 00 00 00 58 00 a0 00 54 00 a0
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 01 14
> 40: f1 10 15 29 01 70 02 fe 00 01 00 00 0c 00 00 00
> 50: 05 6c 87 01 0c f0 e0 fe 00 00 00 00 b1 41 00 00
> 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8
> 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 11 00 00 00 42 01 00 00 00 00 00 00
>
> 00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373]
> (rev a3)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (250ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 53
> Region 0: Memory at a000b000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 3810 [size=8]
> Region 2: Memory at a000a000 (32-bit, non-prefetchable)
> [size=256]
> Region 3: Memory at a0005c00 (32-bit, non-prefetchable) [size=16]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
> Capabilities: [70] MSI-X: Enable- Count=8 Masked-
> Vector table: BAR=2 offset=00000000
> PBA: BAR=3 offset=00000000
> Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
> Address: 00000000fee0f00c Data: 41b9
> Masking: 000000fe Pending: 00000000
> Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: forcedeth
> 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
> 10: 00 b0 00 a0 11 38 00 00 00 a0 00 a0 00 5c 00 a0
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14
> 40: f1 10 15 29 01 70 02 fe 00 01 00 00 0c 00 00 00
> 50: 05 6c 87 01 0c f0 e0 fe 00 00 00 00 b9 41 00 00
> 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8
> 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 11 00 00 00 42 01 00 00 00 00 00 00
>
> 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
> [10de:0378] (rev a3) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: a0200000-a03fffff
> Prefetchable memory behind bridge:
> 00000000a4000000-00000000a5ffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device
> [10de:0000]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
> Address: 00000000fee0f00c Data: 4151
> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr- TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1,
> Latency L0 <512ns, L1 <4us
> ClockPM- Surprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train-
> SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
> HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock-
> NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet-
> CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd On, Power-
> Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [160] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap+ CGenEn-
> ChkCap+ ChkEn-
> Kernel driver in use: pcieport-driver
> 00: de 10 78 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 02 04 00 41 41 00 00
> 20: 20 a0 30 a0 01 a4 f1 a5 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 51 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
> 90: 00 00 41 30 00 00 00 00 c0 01 48 01 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
> [10de:0377] (rev a3) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
> I/O behind bridge: 00005000-00005fff
> Memory behind bridge: a1000000-a2ffffff
> Prefetchable memory behind bridge:
> 00000000b0000000-00000000bfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device
> [10de:0000]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
> Address: 00000000fee0f00c Data: 4159
> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s
> L1, Latency L0 <512ns, L1 <4us
> ClockPM- Surprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
> SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
> HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock-
> NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet-
> CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd On, Power-
> Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [160] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap+ CGenEn-
> ChkCap+ ChkEn-
> Kernel driver in use: pcieport-driver
> 00: de 10 77 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 05 05 00 51 51 00 00
> 20: 00 a1 f0 a2 01 b0 f1 bf 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 0c 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 59 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 01 3d 11 00
> 90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide-
> HostHide+ Slave- <EOCErr- DUL-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 1.0GHz
> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT-
> 64bA- UIDRD- ExtRS- UCnfE-
> Capabilities: [a0] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide-
> HostHide+ Slave- <EOCErr- DUL-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 1.0GHz
> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT-
> 64bA- UIDRD- ExtRS- UCnfE-
> Capabilities: [c0] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide-
> HostHide+ Slave- <EOCErr- DUL-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 1.0GHz
> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT-
> 64bA- UIDRD- ExtRS- UCnfE-
> 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 01 03 00 02 04 01 00 01 01 01 00 01 01 01 00
> 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
> 60: 10 00 03 00 e4 02 00 00 20 c8 0e 0f 30 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> 90: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> b0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> d0: 69 01 61 01 00 00 7f 00 07 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Address Map [1022:1101]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 03 00 00 00 00 00 6f 01 00 00 00 00 01 00 00 00
> 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
> 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
> 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
> 80: 03 00 a0 00 20 ff bf 00 00 00 00 00 00 00 00 00
> 90: 03 00 c0 00 01 ff df 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 03 0a 00 00 20 0b 00 00
> b0: 03 00 e0 00 a0 ff e7 00 03 00 e8 00 81 ff ef 00
> c0: 33 10 00 00 20 50 00 00 03 60 00 00 01 60 00 00
> d0: 00 00 00 00 00 00 00 00 03 f0 00 00 01 f0 00 00
> e0: 03 02 00 7f 13 00 80 ff 00 00 00 00 00 00 00 00
> f0: 01 70 00 90 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] DRAM Controller [1022:1102]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 00 00 00 01 01 00 00 01 02 00 00 01 03 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: e0 3c f8 00 e0 3c f8 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
> 80: 22 00 00 00 00 00 00 00 24 a2 68 cf 20 13 92 00
> 90: 10 08 08 00 5a 90 40 64 39 00 00 80 00 00 00 00
> a0: 49 03 00 cf 00 00 00 00 00 00 00 00 00 00 00 00
> b0: fb 9d eb cc 89 00 00 00 68 1c 1f e8 3f c0 e7 ff
> c0: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 3f 4c 9f 36 1c bd 36 8b fd 8e ce 1e 2f 9e 6e b4
> e0: 15 6e 8f 90 86 9d 96 81 7f ce 4e 9e 3f bb 2f 94
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Miscellaneous Control [1022:1103]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [f0] Secure device <?>
> Kernel driver in use: k8temp
> 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
> 40: ff 3b 04 00 40 00 d0 0a 00 00 00 00 00 00 00 00
> 50: 08 12 f0 71 e9 00 00 00 00 00 00 00 00 26 00 00
> 60: 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00
> 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
> 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00
> 90: 06 00 00 00 48 00 00 00 10 d4 fa df 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 0f 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 07 a7 e2 04 10 27 c0 20 26 26 25 00
> e0: 00 00 00 00 24 18 5d 00 1b 17 00 00 00 00 00 00
> f0: 0f 00 10 00 00 04 00 00 02 00 00 00 12 0f 04 00
>
> 00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide-
> HostHide+ Slave- <EOCErr- DUL-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 1.0GHz
> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT-
> 64bA- UIDRD- ExtRS- UCnfE-
> Capabilities: [a0] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide-
> HostHide+ Slave- <EOCErr- DUL-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 1.0GHz
> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT-
> 64bA- UIDRD- ExtRS- UCnfE-
> Capabilities: [c0] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide-
> HostHide+ Slave- <EOCErr- DUL-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 1.0GHz
> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT-
> 64bA- UIDRD- ExtRS- UCnfE-
> 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> 40: 04 08 01 00 01 01 05 00 01 01 01 00 01 01 01 00
> 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
> 60: 11 00 03 00 e4 00 00 00 20 c8 0e 0f 1c 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> 90: 69 01 61 01 00 80 ff 00 07 00 00 00 00 00 00 00
> a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> b0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> d0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Address Map [1022:1101]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 03 00 00 00 00 00 6f 01 00 00 00 00 01 00 00 00
> 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
> 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
> 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
> 80: 03 00 a0 00 20 ff bf 00 00 00 00 00 00 00 00 00
> 90: 03 00 c0 00 01 ff df 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 03 0a 00 00 20 0b 00 00
> b0: 03 00 e0 00 a0 ff e7 00 03 00 e8 00 81 ff ef 00
> c0: 33 10 00 00 20 50 00 00 03 60 00 00 01 60 00 00
> d0: 00 00 00 00 00 00 00 00 03 f0 00 00 01 f0 00 00
> e0: 03 02 00 7f 13 00 80 ff 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] DRAM Controller [1022:1102]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 00
> 90: 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 96 8a bb cd 1f 00 00 00 01 1e 0f 08 bd 50 76 57
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 1d 7b 36 67 30 87 df 7e 02 18 72 9f 8c 39 fd 74
> e0: 0d 17 3e a3 1a c3 ff 36 c1 5c 38 df cc 19 dd 72
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Miscellaneous Control [1022:1103]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [f0] Secure device <?>
> Kernel driver in use: k8temp
> 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
> 40: ff 3b 04 00 40 00 50 0a 00 00 00 00 00 00 00 00
> 50: 00 d0 01 c8 c7 00 00 00 00 00 00 00 00 00 00 84
> 60: 20 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00
> 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
> 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00
> 90: 06 00 00 00 48 00 00 00 80 fe ff fb 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 07 a7 e2 04 10 27 c0 20 25 26 26 00
> e0: 00 00 00 00 24 18 58 00 1b 17 00 00 00 00 00 00
> f0: 0f 00 10 00 00 00 00 00 00 00 00 00 12 0f 04 00
>
> 01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A
> IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 21
> Region 0: Memory at a0104000 (32-bit, non-prefetchable) [size=2K]
> Region 1: Memory at a0100000 (32-bit, non-prefetchable)
> [size=16K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
> Kernel driver in use: ohci1394
> 00: 4c 10 23 80 16 00 10 02 00 10 00 0c 10 40 00 00
> 10: 00 40 10 a0 00 00 10 a0 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04
> 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
> f0: 10 00 00 00 82 10 00 00 f1 10 15 29 00 00 00 00
>
> 02:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express -
> PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=02, secondary=03, subordinate=03, sec-latency=68
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: a0300000-a03fffff
> Prefetchable memory behind bridge:
> 00000000a4000000-00000000a5ffffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> BrConfRtry-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+
> AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1,
> Latency L0 <4us, L1 <16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train-
> SlotClk- DLActive- BWMgmt- ABWMgmt-
> Capabilities: [54] PCI-X bridge device
> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
> Freq=133MHz
> Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
> Upstream: Capacity=32 CommitmentLimit=32
> Downstream: Capacity=16 CommitmentLimit=16
> Capabilities: [64] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA
> PME(D0+,D1+,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [100] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
> AERCap: First Error Pointer: 14, GenCap+ CGenEn-
> ChkCap+ ChkEn-
> 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
> 10: 00 00 00 00 00 00 00 00 02 03 03 44 41 41 20 04
> 20: 30 a0 30 a0 01 a4 f1 a5 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 10 54 71 00 01 00 00 00 00 20 0a 00 81 6c 02 00
> 50: 00 00 41 00 07 64 c3 00 00 02 00 00 20 00 20 00
> 60: 10 00 10 00 01 00 42 da 00 00 c0 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 1f 3f 00 00 00 00
> 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 02:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express -
> PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Region 0: Memory at a0200000 (64-bit, non-prefetchable)
> [size=128]
> Bus: primary=02, secondary=04, subordinate=04, sec-latency=4
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge:
> 00000000fff00000-00000000000fffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> BrConfRtry-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1,
> Latency L0 <4us, L1 <16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train-
> SlotClk- DLActive- BWMgmt- ABWMgmt-
> Capabilities: [54] PCI-X bridge device
> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
> Freq=conv
> Status: Dev=02:00.1 64bit- 133MHz- SCD- USC- SCO- SRD-
> Upstream: Capacity=32 CommitmentLimit=32
> Downstream: Capacity=16 CommitmentLimit=16
> Capabilities: [64] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA
> PME(D0+,D1+,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [6c] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [7c] Hot-plug capable
> Capabilities: [100] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap+ CGenEn-
> ChkCap+ ChkEn-
> 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
> 10: 04 00 20 a0 00 00 00 00 02 04 04 04 f1 01 20 24
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 00
> 40: 10 54 71 00 01 00 00 00 00 20 00 00 81 6c 02 00
> 50: 00 00 41 00 07 64 03 00 01 02 00 00 20 00 20 00
> 60: 10 00 10 00 01 6c 42 da 00 00 c0 00 05 7c 80 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 03:09.0 RAID bus controller [0104]: 3ware Inc 9550SX SATA-II RAID
> PCI-X [13c1:1003]
> Subsystem: 3ware Inc 9550SX SATA-II RAID PCI-X [13c1:1003]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (16000ns min), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at a4000000 (64-bit, prefetchable) [size=32M]
> Region 2: Memory at a0300000 (64-bit, non-prefetchable) [size=4K]
> Region 4: I/O ports at 4000 [size=64]
> [virtual] Expansion ROM at a0320000 [disabled] [size=128K]
> Capabilities: [e0] PCI-X non-bridge device
> Command: DPERE- ERO+ RBC=512 OST=3
> Status: Dev=03:09.0 64bit+ 133MHz+ SCD- USC- DC=simple
> DMMRBC=512 DMOST=3 DMCRS=16 RSCEM- 266MHz- 533MHz-
> Capabilities: [e8] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [f0] MSI: Enable- Count=1/8 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Kernel driver in use: 3w-9xxx
> 00: c1 13 03 10 17 00 b0 02 00 00 04 01 10 40 00 00
> 10: 0c 00 00 a4 00 00 00 00 04 00 30 a0 00 00 00 00
> 20: 01 40 00 00 00 00 00 00 00 00 00 00 c1 13 03 10
> 30: 00 00 00 00 e0 00 00 00 00 00 00 00 0a 01 40 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 82
> 50: 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 07 e8 22 00 48 03 03 05 01 f0 02 06 00 00 00 00
> f0: 05 00 86 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 05:00.0 VGA compatible controller [0300]: nVidia Corporation G73
> [GeForce 7600 GT] [10de:0391] (rev a1) (prog-if 00 [VGA controller])
> Subsystem: ASUSTeK Computer Inc. Device [1043:81f7]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at a2000000 (32-bit, non-prefetchable)
> [size=16M]
> Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
> Region 3: Memory at a1000000 (64-bit, non-prefetchable)
> [size=16M]
> Region 5: I/O ports at 5000 [size=128]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [78] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <1us, L1 <4us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s
> L1, Latency L0 <1us, L1 <4us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 128 bytes Disabled-
> Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [128] Power Budgeting <?>
> Kernel driver in use: nvidia
> 00: de 10 91 03 07 00 10 00 a1 00 00 03 00 00 00 00
> 10: 00 00 00 a2 0c 00 00 b0 00 00 00 00 04 00 00 a1
> 20: 00 00 00 00 01 50 00 00 00 00 00 00 43 10 f7 81
> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
> 60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 10 00 01 00 00 05 00 00
> 80: 10 28 00 00 01 4d 01 00 08 00 01 11 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 80:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller
> [10de:0369] (rev a2)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [44] HyperTransport: Slave or Primary Interface
> Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC-
> TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+
> TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut-
> LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 1.03
> Link Frequency 0: 1.0GHz
> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+
> 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT-
> 64bA- UIDRD-
> Link Frequency 1: 200MHz
> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz-
> 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE-
> CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
> Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> 00: de 10 69 03 06 00 b0 00 a2 00 00 05 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
> 40: f1 10 15 29 08 dc e0 01 22 20 11 11 d0 00 00 00
> 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 0a 00
> 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
> 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
> 90: 70 00 80 80 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
> e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 80:01.0 RAM memory [0500]: nVidia Corporation MCP55 LPC Bridge
> [10de:0361] (rev a3)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Region 0: I/O ports at 2c00 [size=128]
> Region 1: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
> 00: de 10 61 03 0f 00 a0 00 a3 00 00 05 00 00 80 00
> 10: 01 2c 00 00 00 00 00 c0 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
> 40: f1 10 15 29 00 00 00 00 fa 3e ff 00 fa 3e ff 00
> 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 f9 ff
> 70: 10 00 ff ff 43 00 00 00 00 00 42 20 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 ff 00 00 01 ff 00 00 00
> 90: ff 7f 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 80:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 255
> Region 0: I/O ports at 6000 [size=64]
> Region 4: I/O ports at 6440 [size=64]
> Region 5: I/O ports at 6400 [size=64]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: nForce2_smbus
> 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
> 10: 01 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 41 64 00 00 01 64 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
> 40: f1 10 15 29 01 00 02 c0 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 01 f0 00 00 01 f4 00 00 01 f8 00 00 00 00 00 00
> 70: 01 00 00 00 00 00 04 c0 00 00 00 00 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: e6 16 05 00 a5 03 50 07 80 ff f7 00 61 44 44 11
> f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
>
> 80:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
> [10de:0378] (rev a3) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=80, secondary=81, subordinate=81, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge:
> 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device
> [10de:0000]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
> Address: 00000000fee0f00c Data: 4161
> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr- TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1,
> Latency L0 <512ns, L1 <4us
> ClockPM- Surprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
> HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock-
> NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet-
> CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd On, Power-
> Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet- Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Kernel driver in use: pcieport-driver
> 00: de 10 78 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 80 81 81 00 f1 01 00 00
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 61 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
> 90: 00 00 41 10 00 00 00 00 c0 01 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 80:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
> [10de:0377] (rev a3) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=80, secondary=82, subordinate=82, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c1000000-c2ffffff
> Prefetchable memory behind bridge:
> 00000000d0000000-00000000dfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device
> [10de:0000]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
> Address: 00000000fee0f00c Data: 4169
> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s
> L1, Latency L0 <512ns, L1 <4us
> ClockPM- Surprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
> SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
> HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock-
> NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet-
> CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd On, Power-
> Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Kernel driver in use: pcieport-driver
> 00: de 10 77 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 80 82 82 00 f1 01 00 00
> 20: 00 c1 f0 c2 01 d0 f1 df 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 69 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 01 3d 11 00
> 90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 82:00.0 VGA compatible controller [0300]: nVidia Corporation NV38GL
> [Quadro FX 1300] [10de:00fe] (rev a2) (prog-if 00 [VGA controller])
> Subsystem: nVidia Corporation Device [10de:0238]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at c2000000 (32-bit, non-prefetchable)
> [size=16M]
> Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M]
> Region 2: Memory at c1000000 (32-bit, non-prefetchable)
> [size=16M]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [78] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <512ns, L1 <4us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s,
> Latency L0 <2us, L1 <16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 128 bytes Disabled-
> Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> 00: de 10 fe 00 07 00 10 00 a2 00 00 03 10 00 00 00
> 10: 00 00 00 c2 08 00 00 d0 00 00 00 c1 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 38 02
> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
> 60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 10 00 11 00 c0 04 00 00
> 80: 10 28 00 00 01 55 02 00 08 00 01 11 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 0c 08 40 c1 01 04 40 c1
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> superiotool r
> Probing for ALi Super I/O at 0x3f0...
> Failed. Returned data: id=0x0000, rev=0x00
> Probing for ALi Super I/O at 0x370...
> Failed. Returned data: id=0xffff, rev=0xff
> Probing for Fintek Super I/O at 0x2e...
> Failed. Returned data: vid=0xffff, id=0xffff
> Probing for Fintek Super I/O at 0x4e...
> Failed. Returned data: vid=0xffff, id=0xffff
> Probing for ITE Super I/O (init=standard) at 0x2e...
> Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=it8761e) at 0x2e...
> Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=it8228e) at 0x2e...
> Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
> Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=standard) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8761e) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8228e) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for NSC Super I/O at 0x2e...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x4e...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x15c...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
> Found SMSC SCH5307 (id=0x81, rev=0x00) at 0x2e
> No dump available for this Super I/O
> No extra registers known for this chip.
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
> Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
> Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
> Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x3f0...
> Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x89) at 0x3f0...
> Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
> Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
> Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x88) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> i15 at sapien
>
>
> Nicolas AVELINE wrote:
>> Hello !
>>
>> my tyan :
>>
>> S2915-E AS#408544-004
>> *
>>
>> root at Serveur:~# flashrom -V*
>> flashrom v0.9.1-r877
>> No coreboot table found.
>> DMI string 0: "Hewlett-Packard"
>> DMI string 1: "HP xw9400 Workstation"
>> DMI string 2: " "
>> DMI string 3: "Hewlett-Packard"
>> DMI string 4: "0A1Ch"
>> DMI string 5: "E"
>> Found chipset "NVIDIA MCP55", enabling flash write... OK.
>> This chipset supports the following protocols: Non-SPI.
>> Calibrating delay loop... 478M loops per second, 100 myus = 255 us. OK.
>> Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x24, id2 0x50
>> Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
>> Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
>> Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0x41, id2
>> 0x4d, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
>> Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0x41, id2 0x4d
>> Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xe9, id2
>> 0x6d, id1 is normal flash content, id2 is normal flash content
>> Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x24,
>> id2 0x50, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xff, id2
>> 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xe9, id2
>> 0x6d, id1 is normal flash content, id2 is normal flash content
>> Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xff, id2 0xd3
>> Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xff, id2 0xd3
>> Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
>> Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xff, id2
>> 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xff, id2
>> 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1
>> 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content,
>> id2 is normal flash content
>> Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1
>> 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content,
>> id2 is normal flash content
>> Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1
>> 0xff, id2 0xff, id1 parity violation, id1 is normal flash content,
>> id2 is normal flash content
>> Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1
>> 0xff, id2 0xff, id1 parity violation, id1 is normal flash content,
>> id2 is normal flash content
>> Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff,
>> id2 0xff
>> Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff,
>> id2 0xff
>> Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x24,
>> id2 0x50, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x24,
>> id2 0x50, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff
>> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x4d
>> Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x24, id2 0x50
>> Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x24, id2 0x50
>> Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xff, id2 0xd3
>> Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xff, id2 0xd3
>> Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xff, id2 0xff
>> Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for PMC Pm29F002T, 256 KB: probe_29f040b: id1 0xff, id2 0xd3
>> Probing for PMC Pm29F002B, 256 KB: probe_29f040b: id1 0xff, id2 0xd3
>> Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x24, id2
>> 0x50, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2
>> 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xff, id2
>> 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0x41, id2 0x4d
>> Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff
>> Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x24, id2
>> 0x50, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x24, id2
>> 0x50, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xff, id2
>> 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x24,
>> id2 0x50, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xff, id2
>> 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xe9, id2
>> 0x6d, id1 is normal flash content, id2 is normal flash content
>> Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x24, id2
>> 0x50, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xff, id2
>> 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xff, id2
>> 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0x41,
>> id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff
>> Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41,
>> id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x41, id2 0x4d
>> Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
>> Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2
>> 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xff, id2
>> 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec_common: id1 0x41,
>> id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
>> Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xff, id2
>> 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xff, id2
>> 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
>> Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
>> Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x24, id2
>> 0x50, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0xff, id2
>> 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec_common: id1 0x41,
>> id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec_common: id1 0x41,
>> id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xd3
>> Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
>> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff
>> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x4d
>> Probing for ST M50LPW116, 2048 KB: probe_jedec_common: id1 0xff, id2
>> 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x24,
>> id2 0x50, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xff, id2
>> 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xff, id2
>> 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x24,
>> id2 0x50, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond
>> W29EE011 because the probing sequence puts the AMIC A49LF040A in a
>> funky state. Use 'flashrom -c W29EE011' if you have a board with this
>> chip.
>> Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xff,
>> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0x41,
>> id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff,
>> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is
>> normal flash content
>> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe
>> timing information, using default 10mS/40uS. probe_jedec_common: id1
>> 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content,
>> id2 is normal flash content
>> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct
>> probe timing information, using default 10mS/40uS.
>> probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is
>> normal flash content, id2 is normal flash content
>> Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus
>> type Non-SPI and chip bus type SPI are incompatible.
>> Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host
>> bus type Non-SPI and chip bus type SPI are incompatible.
>> Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus
>> type Non-SPI and chip bus type SPI are incompatible.
>> Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus
>> type Non-SPI and chip bus type SPI are incompatible.
>> Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus
>> type Non-SPI and chip bus type SPI are incompatible.
>> No EEPROM/flash device found.
>> If you know which flash chip you have, and if this version of flashrom
>> supports a similar flash chip, you can try to force read your chip. Run:
>> flashrom -f -r -c similar_supported_flash_chip filename
>>
>> Note: flashrom can never write when the flash chip isn't found
>> automatically.
>>
>> *root at Serveur:~# superiotool -deV*
>> superiotool r3844
>> Probing for ALi Super I/O at 0x3f0...
>> Failed. Returned data: id=0x0000, rev=0x00
>> Probing for ALi Super I/O at 0x370...
>> Failed. Returned data: id=0xffff, rev=0xff
>> Probing for Fintek Super I/O at 0x2e...
>> Failed. Returned data: vid=0x0400, id=0x0081
>> Probing for Fintek Super I/O at 0x4e...
>> Failed. Returned data: vid=0xffff, id=0xffff
>> Probing for ITE Super I/O (init=standard) at 0x2e...
>> Failed. Returned data: id=0x8100, rev=0x1
>> Probing for ITE Super I/O (init=it8761e) at 0x2e...
>> Failed. Returned data: id=0x8100, rev=0x1
>> Probing for ITE Super I/O (init=it8228e) at 0x2e...
>> Failed. Returned data: id=0x8100, rev=0x1
>> Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
>> Failed. Returned data: id=0x8100, rev=0x1
>> Probing for ITE Super I/O (init=standard) at 0x4e...
>> Failed. Returned data: id=0xffff, rev=0xf
>> Probing for ITE Super I/O (init=it8761e) at 0x4e...
>> Failed. Returned data: id=0xffff, rev=0xf
>> Probing for ITE Super I/O (init=it8228e) at 0x4e...
>> Failed. Returned data: id=0xffff, rev=0xf
>> Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
>> Failed. Returned data: id=0xffff, rev=0xf
>> Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
>> Failed. Returned data: id=0xffff, rev=0xf
>> Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
>> Failed. Returned data: id=0xffff, rev=0xf
>> Probing for NSC Super I/O at 0x2e...
>> Failed. Returned data: port=0xff, port+1=0xff
>> Probing for NSC Super I/O at 0x4e...
>> Failed. Returned data: port=0xff, port+1=0xff
>> Probing for NSC Super I/O at 0x15c...
>> Failed. Returned data: port=0xff, port+1=0xff
>> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
>> Found SMSC SCH5307 (id=0x81, rev=0x00) at 0x2e
>> No dump available for this Super I/O
>> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
>> Failed. Returned data: id=0x00, rev=0x00
>> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
>> Found SMSC FDC37N972 (id=0x0b, rev=0x00) at 0x4e
>> Register dump:
>> idx 02 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
>> val 00 0b 00 00 00 00 00 4e 00 00 00 00 00 00 00 00 00
>> def 00 0b 00 00 00 04 04 NA NA 00 00 00 00 00 00 00 00
>> LDN 0x00 (Floppy)
>> idx 30 60 61 70 74 f0 f1 f2 f3 f4 f5
>> val 01 04 c0 00 00 00 d1 15 0b 00 10
>> def 00 03 f0 06 02 0e 00 ff RR 00 00
>> LDN 0x01 (Power Management (PM1))
>> idx 30 60 61
>> val 01 04 c0
>> def 00 00 00
>> LDN 0x03 (Parallel port)
>> idx 30 60 61 70 74 f0 f1
>> val 01 04 c0 00 00 00 d1
>> def 00 00 00 00 04 3c 00
>> LDN 0x04 (COM1)
>> idx 30 60 61 70 f0
>> val 01 04 c0 00 00
>> def 00 00 00 00 00
>> LDN 0x05 (COM2)
>> idx 30 60 61 62 63 70 74 f0 f1 f2 f7 f8
>> val 01 04 c0 00 00 00 00 00 d1 15 00 00
>> def 00 00 00 00 00 00 04 00 02 03 00 00
>> LDN 0x06 (Real-time clock (RTC))
>> idx 30 60 61 62 63 70 f0 f1
>> val 01 04 c0 00 00 00 00 d1
>> def 00 00 70 00 74 00 00 NA
>> LDN 0x07 (Keyboard)
>> idx 30 60 61 70 72 f0
>> val 01 04 c0 00 00 00
>> def 00 00 00 00 00 00
>> LDN 0x08 (Embedded Controller (EC))
>> idx 30 60 61
>> val 01 04 c0
>> def 00 00 62
>> LDN 0x09 (Mailbox)
>> idx 30 60 61
>> val 01 04 c0
>> def 00 00 00
>> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
>> Failed. Returned data: id=0x00, rev=0x00
>> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
>> Failed. Returned data: id=0xff, rev=0xff
>> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
>> Failed. Returned data: id=0xff, rev=0xff
>> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
>> Failed. Returned data: id=0xff, rev=0xff
>> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
>> Failed. Returned data: id=0xff, rev=0xff
>> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
>> Failed. Returned data: id=0x00, rev=0x00
>> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
>> Failed. Returned data: id=0x00, rev=0x00
>> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
>> Failed. Returned data: id=0xff, rev=0xff
>> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
>> Failed. Returned data: id=0xff, rev=0xff
>> Probing for Winbond Super I/O (init=0x88) at 0x2e...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x89) at 0x2e...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x88) at 0x4e...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x89) at 0x4e...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x88) at 0x3f0...
>> Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
>> Probing for Winbond Super I/O (init=0x89) at 0x3f0...
>> Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
>> Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
>> Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
>> Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
>> Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
>> Probing for Winbond Super I/O (init=0x88) at 0x370...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x89) at 0x370...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x88) at 0x250...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x89) at 0x250...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>> Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
>> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>>
>>
>> *root at Serveur:~# lspci -nnvvvxxx*
>> 0000:00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory
>> Controller [10de:0369] (rev a2)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Capabilities: [44] HyperTransport: Slave or Primary Interface
>> Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
>> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO-
>> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
>> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
>> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit
>> DwFcInEn- LWO=8bit DwFcOutEn-
>> Revision ID: 1.03
>> Link Frequency 0: 1.0GHz
>> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+
>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>> Link Frequency 1: 200MHz
>> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz-
>> 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE-
>> SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>> Prefetchable memory behind bridge Upper: 00-00
>> Bus Number: 00
>> Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
>> Mapping Address Base: 00000000fee00000
>> 00: de 10 69 03 06 01 b0 00 a2 00 00 05 00 00 00 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
>> 40: 3c 10 fe 12 08 dc e0 01 22 20 11 11 d0 00 00 00
>> 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 38 0a 00
>> 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
>> 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
>> 90: 78 00 00 90 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
>> c0: 02 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
>> e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge
>> [10de:0364] (rev a3)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> 00: de 10 64 03 0f 00 a0 00 a3 00 01 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
>> 40: 3c 10 fe 12 00 00 00 00 fa 3e ff 00 de fd 00 00
>> 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
>> 70: 10 00 ff ff c1 80 00 00 00 00 64 19 03 00 00 10
>> 80: 09 c0 00 2d 16 24 00 80 ff 00 00 01 ff 00 00 00
>> 90: 00 08 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
>> a0: a3 00 10 10 00 00 00 00 00 04 cb 04 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 50 28 00 fe fd e1 00 b0
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>>
>> 0000:00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368]
>> (rev a3)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Interrupt: pin A routed to IRQ 10
>> Region 4: I/O ports at 3000 [size=64]
>> Region 5: I/O ports at 3040 [size=64]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Kernel driver in use: nForce2_smbus
>> Kernel modules: i2c-nforce2
>> 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 01 30 00 00 41 30 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 00 00
>> 40: 3c 10 fe 12 01 00 02 c0 00 00 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 01 f8 00 00 01 f9 00 00 01 fa 00 00 00 f0 ef fd
>> 70: 01 00 00 00 00 00 e0 fc 00 00 00 00 01 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: d4 30 80 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 64 15 05 00 b5 03 00 07 80 30 00 00 77 44 44 11
>> f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
>>
>> 0000:00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB
>> Controller [10de:036c] (rev a1) (prog-if 10)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin A routed to IRQ 18
>> Region 0: Memory at fce44000 (32-bit, non-prefetchable) [size=4K]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Kernel driver in use: ohci_hcd
>> 00: de 10 6c 03 07 00 b0 00 a1 10 03 0c 00 00 80 00
>> 10: 00 40 e4 fc 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
>> 40: 3c 10 fe 12 01 00 02 fe 00 00 00 00 00 00 00 00
>> 50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>>
>> 0000:00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB
>> Controller [10de:036d] (rev a2) (prog-if 20)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin B routed to IRQ 19
>> Region 0: Memory at fce4a000 (32-bit, non-prefetchable) [size=256]
>> Capabilities: [44] Debug port: BAR=1 offset=0098
>> Capabilities: [80] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Kernel driver in use: ehci_hcd
>> 00: de 10 6d 03 06 00 b0 00 a2 20 03 0c 00 00 80 00
>> 10: 00 a0 e4 fc 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01
>> 40: 3c 10 fe 12 0a 80 98 20 00 00 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
>> 70: 00 00 08 00 00 10 20 80 89 3d b6 22 77 25 64 00
>> 80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
>> 90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00
>> b0: 44 44 00 00 00 00 00 00 ff 03 00 00 00 00 00 00
>> c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>>
>> 0000:00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE
>> [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0 (750ns min, 250ns max)
>> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
>> [disabled] [size=8]
>> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
>> [disabled] [size=1]
>> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
>> [disabled] [size=8]
>> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
>> [disabled] [size=1]
>> Region 4: I/O ports at 3080 [size=16]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Kernel driver in use: pata_amd
>> 00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 81 30 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
>> 40: 3c 10 fe 12 01 00 02 00 00 00 00 00 00 00 00 00
>> 50: 02 80 00 00 00 00 00 00 99 99 20 20 0a 00 a8 20
>> 60: 00 00 c4 c6 00 00 00 00 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 c0 91 e7 00 00 02 34 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>>
>> 0000:00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA
>> Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin A routed to IRQ 22
>> Region 0: I/O ports at 30c0 [size=8]
>> Region 1: I/O ports at 3100 [size=4]
>> Region 2: I/O ports at 30c8 [size=8]
>> Region 3: I/O ports at 3104 [size=4]
>> Region 4: I/O ports at 3090 [size=16]
>> Region 5: Memory at fce45000 (32-bit, non-prefetchable) [size=4K]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/2 Enable-
>> Address: 0000000000000000 Data: 0000
>> Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
>> Kernel driver in use: sata_nv
>> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
>> 10: c1 30 00 00 01 31 00 00 c9 30 00 00 05 31 00 00
>> 20: 91 30 00 00 00 50 e4 fc 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
>> 40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
>> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
>> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
>> 80: 00 00 00 c0 d7 fb c7 bb 00 00 0b 03 fd bc 0e 6f
>> 90: 00 00 ff 3d 00 00 00 00 06 00 06 10 7f 03 01 01
>> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
>> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
>> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 01 00 e0 07
>> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 10 00
>> f0: 00 00 00 00 00 00 00 00 12 00 0c 00 00 00 00 00
>>
>> 0000:00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA
>> Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin B routed to IRQ 21
>> Region 0: I/O ports at 30d0 [size=8]
>> Region 1: I/O ports at 3108 [size=4]
>> Region 2: I/O ports at 30d8 [size=8]
>> Region 3: I/O ports at 310c [size=4]
>> Region 4: I/O ports at 30a0 [size=16]
>> Region 5: Memory at fce46000 (32-bit, non-prefetchable) [size=4K]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/2 Enable-
>> Address: 0000000000000000 Data: 0000
>> Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
>> Kernel driver in use: sata_nv
>> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
>> 10: d1 30 00 00 09 31 00 00 d9 30 00 00 0d 31 00 00
>> 20: a1 30 00 00 00 60 e4 fc 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01
>> 40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
>> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
>> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
>> 80: 00 00 00 c0 6f fd 7f bb 00 00 0f 03 fb f7 f8 73
>> 90: 00 00 23 3f 00 00 00 00 06 00 06 10 7f 03 01 01
>> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
>> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
>> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 90 00
>> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 a1 80 02
>> f0: 00 00 00 00 00 00 00 00 12 00 0c 00 00 00 00 00
>>
>> 0000:00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA
>> Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin C routed to IRQ 20
>> Region 0: I/O ports at 30e0 [size=8]
>> Region 1: I/O ports at 3110 [size=4]
>> Region 2: I/O ports at 30e8 [size=8]
>> Region 3: I/O ports at 3114 [size=4]
>> Region 4: I/O ports at 30b0 [size=16]
>> Region 5: Memory at fce47000 (32-bit, non-prefetchable) [size=4K]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/2 Enable-
>> Address: 0000000000000000 Data: 0000
>> Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
>> Kernel driver in use: sata_nv
>> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
>> 10: e1 30 00 00 11 31 00 00 e9 30 00 00 15 31 00 00
>> 20: b1 30 00 00 00 70 e4 fc 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 03 01
>> 40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
>> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
>> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
>> 80: 00 00 00 c0 be 7d fb fc 00 00 eb 12 0c bd f7 bd
>> 90: 00 00 92 18 00 00 00 00 06 00 06 10 7f 03 01 01
>> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
>> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
>> d0: 0a 00 02 76 42 00 00 00 00 00 00 00 00 03 00 04
>> e0: 0a 00 02 76 42 00 00 00 00 00 00 00 00 00 f0 07
>> f0: 00 00 00 00 00 00 00 00 10 00 0c 00 00 00 00 00
>>
>> 0000:00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge
>> [10de:0370] (rev a2) (prog-if 01)
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>> I/O behind bridge: 0000f000-00000fff
>> Memory behind bridge: fc400000-fccfffff
>> Prefetchable memory behind bridge: f8000000-f80fffff
>> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- <SERR- <PERR-
>> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
>> Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
>> Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
>> Mapping Address Base: 00000000fee00000
>> 00: de 10 70 03 07 01 b0 00 a2 01 04 06 00 00 81 00
>> 10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 80 02
>> 20: 40 fc c0 fc 00 f8 00 f8 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 0a 0a
>> 40: 00 00 33 07 01 00 02 00 05 00 00 00 00 00 48 00
>> 50: 00 00 fe ef 00 00 00 00 ff 1f ff 1f 03 00 84 00
>> 60: 00 00 85 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 fe 0f 01 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 a8
>> 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 06 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
>> b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb
>> c0: de 10 84 cb 03 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:00:06.1 Audio device [0403]: nVidia Corporation MCP55 High
>> Definition Audio [10de:0371] (rev a2)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0 (500ns min, 1250ns max)
>> Interrupt: pin B routed to IRQ 22
>> Region 0: Memory at fce40000 (32-bit, non-prefetchable) [size=16K]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+
>> Queue=0/0 Enable-
>> Address: 0000000000000000 Data: 0000
>> Masking: 00000000 Pending: 00000000
>> Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
>> Kernel driver in use: HDA Intel
>> Kernel modules: snd-hda-intel
>> 00: de 10 71 03 06 00 b0 00 a2 00 03 04 00 00 80 00
>> 10: 00 00 e4 fc 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 02 05
>> 40: 3c 10 fe 12 01 50 02 c0 00 00 00 00 01 01 0f 00
>> 50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 02 a8
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 47 10 29 00 00 00 00 00 00
>>
>> 0000:00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet
>> [10de:0373] (rev a3)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0 (250ns min, 5000ns max)
>> Interrupt: pin A routed to IRQ 50
>> Region 0: Memory at fce48000 (32-bit, non-prefetchable) [size=4K]
>> Region 1: I/O ports at 30f0 [size=8]
>> Region 2: Memory at fce4a100 (32-bit, non-prefetchable) [size=256]
>> Region 3: Memory at fce4a300 (32-bit, non-prefetchable) [size=16]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>> Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
>> Vector table: BAR=2 offset=00000000
>> PBA: BAR=3 offset=00000000
>> Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+
>> Queue=0/3 Enable+
>> Address: 00000000feeff00c Data: 41a1
>> Masking: 000000fe Pending: 00000000
>> Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
>> Kernel driver in use: forcedeth
>> Kernel modules: forcedeth
>> 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
>> 10: 00 80 e4 fc f1 30 00 00 00 a1 e4 fc 00 a3 e4 fc
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 14
>> 40: 3c 10 fe 12 01 70 02 fe 00 01 00 00 01 00 00 00
>> 50: 05 6c 87 01 0c f0 ef fe 00 00 00 00 a1 41 00 00
>> 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 02 a8
>> 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00
>>
>> 0000:00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet
>> [10de:0373] (rev a3)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0 (250ns min, 5000ns max)
>> Interrupt: pin A routed to IRQ 51
>> Region 0: Memory at fce49000 (32-bit, non-prefetchable) [size=4K]
>> Region 1: I/O ports at 30f8 [size=8]
>> Region 2: Memory at fce4a200 (32-bit, non-prefetchable) [size=256]
>> Region 3: Memory at fce4a310 (32-bit, non-prefetchable) [size=16]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>> Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
>> Vector table: BAR=2 offset=00000000
>> PBA: BAR=3 offset=00000000
>> Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+
>> Queue=0/3 Enable+
>> Address: 00000000feeff00c Data: 41a9
>> Masking: 000000fe Pending: 00000000
>> Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
>> Kernel driver in use: forcedeth
>> Kernel modules: forcedeth
>> 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
>> 10: 00 90 e4 fc f9 30 00 00 00 a2 e4 fc 10 a3 e4 fc
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14
>> 40: 3c 10 fe 12 01 70 02 fe 00 01 00 00 00 00 00 00
>> 50: 05 6c 87 01 0c f0 ef fe 00 00 00 00 a9 41 00 00
>> 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 02 a8
>> 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00
>>
>> 0000:00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express
>> bridge [10de:0378] (rev a3)
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Bus: primary=00, secondary=2b, subordinate=2d, sec-latency=0
>> I/O behind bridge: 0000f000-00000fff
>> Memory behind bridge: fcd00000-fcdfffff
>> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort+ <SERR- <PERR-
>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
>> Capabilities: [48] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/1 Enable+
>> Address: 00000000feeff00c Data: 4151
>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
>> Mapping Address Base: 00000000fee00000
>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
>> <64ns, L1 <1us
>> ExtTag- RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
>> Unsupported-
>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
>> TransPend-
>> LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1,
>> Latency L0 <512ns, L1 <4us
>> ClockPM- Suprise- LLActRep+ BwNot-
>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
>> CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
>> DLActive+ BWMgmt- ABWMgmt-
>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
>> Surpise-
>> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
>> HPIrq- LinkChg-
>> Control: AttnInd Off, PwrInd On, Power- Interlock-
>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
>> Interlock-
>> Changed: MRL- PresDet+ LinkState+
>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna-
>> CRSVisible-
>> RootCap: CRSVisible-
>> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>> Capabilities: [100] Virtual Channel <?>
>> Capabilities: [160] Advanced Error Reporting <?>
>> Kernel driver in use: pcieport-driver
>> Kernel modules: shpchp
>> 00: de 10 78 03 07 05 10 00 a3 00 04 06 10 00 01 00
>> 10: 00 00 00 00 00 00 00 00 00 2b 2d 00 f1 01 00 20
>> 20: d0 fc d0 fc f1 ff 01 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
>> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
>> 50: 05 60 83 00 0c f0 ef fe 00 00 00 00 51 41 00 00
>> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
>> 90: 00 00 41 30 00 00 00 00 c0 01 48 01 04 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10
>> [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Capabilities: [80] HyperTransport: Host or Secondary Interface
>> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+
>> Slave- <EOCErr- DUL-
>> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
>> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
>> DwFcInEn- LWO=16bit DwFcOutEn-
>> Revision ID: 3.00
>> Link Frequency: 1.0GHz
>> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+
>> UIDRD- ExtRS- UCnfE-
>> Capabilities: [a0] HyperTransport: Host or Secondary Interface
>> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+
>> Slave- <EOCErr- DUL-
>> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
>> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
>> DwFcInEn- LWO=16bit DwFcOutEn-
>> Revision ID: 3.00
>> Link Frequency: 1.0GHz
>> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+
>> UIDRD- ExtRS- UCnfE-
>> Capabilities: [c0] HyperTransport: Host or Secondary Interface
>> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+
>> Slave- <EOCErr- DUL-
>> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
>> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
>> DwFcInEn- LWO=16bit DwFcOutEn-
>> Revision ID: 3.00
>> Link Frequency: 1.0GHz
>> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+
>> UIDRD- ExtRS- UCnfE-
>> 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
>> 40: 01 02 14 00 04 04 04 00 01 02 04 00 01 02 04 00
>> 50: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00
>> 60: 10 00 07 00 e0 02 00 00 20 c8 4e 00 10 0a 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 08 a0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
>> 90: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
>> a0: 08 c0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
>> b0: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
>> c0: 08 00 01 21 20 20 11 11 60 06 75 80 13 00 00 00
>> d0: 92 02 85 04 00 00 00 00 07 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10
>> [Opteron, Athlon64, Sempron] Address Map [1022:1201]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 40: 03 00 00 00 00 00 7f 00 03 00 80 00 01 00 0f 01
>> 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
>> 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
>> 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
>> 80: 03 0a 00 00 20 0b 00 00 03 00 f4 00 81 ff f7 00
>> 90: 03 40 fc 00 20 ef fc 00 03 f0 fc 00 01 0f fd 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 13 30 00 00 20 30 00 00 03 10 00 00 01 20 00 00
>> d0: 00 00 00 00 00 00 00 00 03 e0 00 00 01 e0 00 00
>> e0: 03 02 00 3f 13 00 40 ff 00 00 00 00 00 00 00 00
>> f0: 02 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10
>> [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Kernel driver in use: amd64_edac
>> Kernel modules: amd64_edac_mod
>> 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 40: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 00 00 00 00 e0 3f 38 00 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 05 00 c0 0e 00 00 00 00
>> 80: 60 00 00 00 00 00 00 00 24 ca 69 ef 34 03 82 00
>> 90: 10 21 08 00 0a 80 48 6f 2a 00 00 80 05 00 06 00
>> a0: 00 02 00 00 00 00 00 00 02 00 00 00 00 00 00 00
>> b0: 90 8f a0 1e c1 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10
>> [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Capabilities: [f0] Secure device <?>
>> 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
>> 40: ff ff ff 3f 5c 00 70 4a 00 00 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 10 10 12 10 01 57 81 1b
>> 60: 00 00 00 00 04 00 7f 42 00 00 00 40 52 80 01 00
>> 70: 53 11 04 00 11 11 08 00 14 0c 20 00 14 09 09 00
>> 80: 81 87 00 e6 e6 41 e6 80 08 00 00 00 10 40 40 00
>> 90: 03 00 00 00 10 00 00 00 00 98 7d 00 00 00 00 00
>> a0: 00 28 01 a0 80 18 8c 09 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 1a 29 02 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 24 0f 31 c3 14 1c 00 03 28 54 00 00
>> e0: 00 00 00 00 30 15 00 00 9f 77 f0 02 00 00 00 00
>> f0: 0f 00 10 00 00 00 00 00 00 00 00 00 21 0f 10 00
>>
>> 0000:00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10
>> [Opteron, Athlon64, Sempron] Link Control [1022:1204]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10
>> [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Capabilities: [80] HyperTransport: Host or Secondary Interface
>> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+
>> Slave- <EOCErr- DUL-
>> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
>> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
>> DwFcInEn- LWO=16bit DwFcOutEn-
>> Revision ID: 3.00
>> Link Frequency: 1.0GHz
>> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+
>> UIDRD- ExtRS- UCnfE-
>> Capabilities: [a0] HyperTransport: Host or Secondary Interface
>> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+
>> Slave- <EOCErr- DUL-
>> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
>> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
>> DwFcInEn- LWO=16bit DwFcOutEn-
>> Revision ID: 3.00
>> Link Frequency: 1.0GHz
>> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+
>> UIDRD- ExtRS- UCnfE-
>> Capabilities: [c0] HyperTransport: Host or Secondary Interface
>> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+
>> Slave- <EOCErr- DUL-
>> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
>> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
>> DwFcInEn- LWO=16bit DwFcOutEn-
>> Revision ID: 3.00
>> Link Frequency: 1.0GHz
>> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+
>> UIDRD- ExtRS- UCnfE-
>> 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
>> 40: 08 08 04 00 01 02 24 00 01 02 04 00 01 02 04 00
>> 50: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00
>> 60: 11 00 07 00 e0 00 00 00 20 c8 4e 00 08 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 08 a0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
>> 90: 92 02 85 04 00 40 00 00 07 00 00 00 00 00 00 00
>> a0: 08 c0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
>> b0: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
>> c0: 08 00 01 21 20 20 11 11 60 06 75 80 13 00 00 00
>> d0: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10
>> [Opteron, Athlon64, Sempron] Address Map [1022:1201]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 40: 03 00 00 00 00 00 7f 00 03 00 80 00 01 00 0f 01
>> 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
>> 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
>> 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
>> 80: 03 0a 00 00 20 0b 00 00 03 00 f4 00 81 ff f7 00
>> 90: 03 40 fc 00 20 ef fc 00 03 f0 fc 00 01 0f fd 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 13 30 00 00 20 30 00 00 03 10 00 00 01 20 00 00
>> d0: 00 00 00 00 00 00 00 00 03 e0 00 00 01 e0 00 00
>> e0: 03 02 00 3f 13 00 40 ff 00 00 00 00 00 00 00 00
>> f0: 03 90 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10
>> [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Kernel driver in use: amd64_edac
>> Kernel modules: amd64_edac_mod
>> 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 40: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 00 00 00 00 e0 3f 38 00 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 05 00 00 0f 00 00 00 00
>> 80: 60 00 00 00 00 00 00 00 24 ca 69 ef 34 03 82 00
>> 90: 10 21 08 00 0a 80 48 6f 2a 00 00 80 05 00 08 00
>> a0: 00 02 00 00 00 00 00 00 02 00 00 00 00 00 00 00
>> b0: b8 19 8c 1f c1 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10
>> [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Capabilities: [f0] Secure device <?>
>> 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
>> 40: ff ff ff 3f 5c 00 70 4a 00 00 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 10 10 12 10 01 59 81 9b
>> 60: 00 00 00 00 04 00 7f 42 00 00 00 40 52 80 01 00
>> 70: 53 11 04 00 11 11 08 00 14 0c 20 00 14 09 09 00
>> 80: 81 87 00 e6 e6 41 e6 80 08 00 00 00 10 40 40 00
>> 90: 03 00 00 00 10 00 00 00 00 98 7d 00 00 00 00 00
>> a0: 00 28 01 a0 80 18 8c 0f 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 24 0f 31 c3 14 1c 00 03 28 54 00 00
>> e0: 00 00 00 00 30 15 00 00 9f 77 f0 02 00 00 00 00
>> f0: 0f 00 10 00 00 00 00 00 00 00 00 00 21 0f 10 00
>>
>> 0000:00:19.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10
>> [Opteron, Athlon64, Sempron] Link Control [1022:1204]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:01:04.0 VGA compatible controller [0300]: Trident Microsystems
>> TGUI 9660/938x/968x [1023:9660] (rev d3)
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
>> <TAbort+ <MAbort+ >SERR- <PERR- INTx-
>> Latency: 32
>> Interrupt: pin A routed to IRQ 5
>> Region 0: Memory at fc400000 (32-bit, non-prefetchable) [size=4M]
>> Region 1: Memory at fcc00000 (32-bit, non-prefetchable) [size=64K]
>> Region 2: Memory at fc800000 (32-bit, non-prefetchable) [size=4M]
>> [virtual] Expansion ROM at f8000000 [disabled] [size=64K]
>> Kernel modules: tridentfb
>> 00: 23 10 60 96 07 00 00 32 d3 00 00 03 00 20 00 00
>> 10: 00 00 40 fc 00 00 c0 fc 00 00 80 fc 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00
>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments
>> TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023]
>> (prog-if 10)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 16
>> Region 0: Memory at fcc14000 (32-bit, non-prefetchable) [size=2K]
>> Region 1: Memory at fcc10000 (32-bit, non-prefetchable) [size=16K]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>> Kernel driver in use: ohci1394
>> Kernel modules: firewire-ohci, ohci1394
>> 00: 4c 10 23 80 06 01 10 02 00 10 00 0c 10 20 00 00
>> 10: 00 40 c1 fc 00 00 c1 fc 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 02 04
>> 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
>> f0: 10 00 00 00 82 00 00 00 3c 10 fe 12 00 00 00 00
>>
>> 0000:2b:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express
>> - PCI/PCI-X Bridge [1033:0125] (rev 06)
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Bus: primary=2b, secondary=2c, subordinate=2c, sec-latency=32
>> I/O behind bridge: 0000f000-00000fff
>> Memory behind bridge: fff00000-000fffff
>> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort-
>> <TAbort- <MAbort+ <SERR- <PERR-
>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
>> <64ns, L1 <1us
>> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal+
>> Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
>> TransPend-
>> LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1,
>> Latency L0 <4us, L1 <16us
>> ClockPM- Suprise- LLActRep- BwNot-
>> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
>> DLActive- BWMgmt- ABWMgmt-
>> Capabilities: [54] PCI-X bridge device
>> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
>> Status: Dev=2b:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
>> Upstream: Capacity=32 CommitmentLimit=32
>> Downstream: Capacity=16 CommitmentLimit=16
>> Capabilities: [64] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA
>> PME(D0+,D1+,D2-,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Bridge: PM- B3+
>> Capabilities: [100] Advanced Error Reporting <?>
>> Kernel modules: shpchp
>> 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
>> 10: 00 00 00 00 00 00 00 00 2b 2c 2c 20 f1 01 20 24
>> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
>> 40: 10 54 71 00 01 00 00 00 04 20 0a 00 81 6c 02 00
>> 50: 00 00 41 00 07 64 c3 00 00 2b 00 00 20 00 20 00
>> 60: 10 00 10 00 01 00 42 da 00 00 c0 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 0c 00 19 1f 00 00 00 00
>> 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0000:2b:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express
>> - PCI/PCI-X Bridge [1033:0125] (rev 06)
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Region 0: Memory at fcd00000 (64-bit, non-prefetchable) [size=128]
>> Bus: primary=2b, secondary=2d, subordinate=2d, sec-latency=32
>> I/O behind bridge: 0000f000-00000fff
>> Memory behind bridge: fff00000-000fffff
>> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort-
>> <TAbort- <MAbort+ <SERR- <PERR-
>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
>> <64ns, L1 <1us
>> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal+
>> Unsupported-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
>> TransPend-
>> LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1,
>> Latency L0 <4us, L1 <16us
>> ClockPM- Suprise- LLActRep- BwNot-
>> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
>> DLActive- BWMgmt- ABWMgmt-
>> Capabilities: [54] PCI-X bridge device
>> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
>> Status: Dev=2b:00.1 64bit- 133MHz- SCD- USC- SCO- SRD-
>> Upstream: Capacity=32 CommitmentLimit=32
>> Downstream: Capacity=16 CommitmentLimit=16
>> Capabilities: [64] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA
>> PME(D0+,D1+,D2-,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Bridge: PM- B3+
>> Capabilities: [6c] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/0 Enable-
>> Address: 0000000000000000 Data: 0000
>> Capabilities: [7c] Hot-plug capable
>> Capabilities: [100] Advanced Error Reporting <?>
>> Kernel modules: shpchp
>> 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
>> 10: 04 00 d0 fc 00 00 00 00 2b 2d 2d 20 f1 01 20 24
>> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 02 00
>> 40: 10 54 71 00 01 00 00 00 04 20 00 00 81 6c 02 00
>> 50: 00 00 41 00 07 64 03 00 01 2b 00 00 20 00 20 00
>> 60: 10 00 10 00 01 6c 42 da 00 00 c0 00 05 7c 80 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0001:40:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory
>> Controller [10de:0369] (rev a2)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Capabilities: [44] HyperTransport: Slave or Primary Interface
>> Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
>> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO-
>> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
>> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
>> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit
>> DwFcInEn- LWO=8bit DwFcOutEn-
>> Revision ID: 1.03
>> Link Frequency 0: 1.0GHz
>> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+
>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>> Link Frequency 1: 200MHz
>> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz-
>> 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE-
>> SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>> Prefetchable memory behind bridge Upper: 00-00
>> Bus Number: 00
>> Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
>> Mapping Address Base: 00000000fee00000
>> 00: de 10 69 03 06 01 b0 00 a2 00 00 05 00 00 00 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
>> 40: 3c 10 fe 12 08 dc e0 01 22 00 11 11 d0 00 00 00
>> 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 38 0a 00
>> 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
>> 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
>> 90: 78 00 40 90 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
>> e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0001:40:01.0 RAM memory [0500]: nVidia Corporation MCP55 LPC Bridge
>> [10de:0361] (rev a3)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=4K]
>> 00: de 10 61 03 0f 00 a0 00 a3 00 00 05 00 00 80 00
>> 10: 00 00 00 00 00 00 00 fd 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
>> 40: 3c 10 fe 12 00 00 00 00 fa 3e ff 00 fa 3e ff 00
>> 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 f9 ff
>> 70: 10 00 ff ff c7 80 00 00 00 00 46 20 00 00 00 c0
>> 80: 00 00 00 00 00 00 00 00 ff 00 00 01 ff 00 00 00
>> 90: ff 7f 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>>
>> 0001:40:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368]
>> (rev a3)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Interrupt: pin A routed to IRQ 255
>> Region 4: I/O ports at 2000 [size=64]
>> Region 5: I/O ports at 2040 [size=64]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Kernel driver in use: nForce2_smbus
>> Kernel modules: i2c-nforce2
>> 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 01 20 00 00 41 20 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
>> 40: 3c 10 fe 12 01 00 02 c0 00 00 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 01 e8 00 00 01 e9 00 00 01 ea 00 00 00 00 00 00
>> 70: 01 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: d4 30 80 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: e6 16 05 00 b5 03 00 07 80 ff 57 00 61 44 44 11
>> f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
>>
>> 0001:40:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express
>> bridge [10de:0378] (rev a3)
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Bus: primary=40, secondary=6b, subordinate=6b, sec-latency=0
>> I/O behind bridge: 00001000-00001fff
>> Memory behind bridge: fcf00000-fcffffff
>> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort+ <SERR- <PERR-
>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
>> Capabilities: [48] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/1 Enable+
>> Address: 00000000feeff00c Data: 4159
>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
>> Mapping Address Base: 00000000fee00000
>> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
>> <64ns, L1 <1us
>> ExtTag- RBE+ FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
>> Unsupported-
>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr-
>> TransPend-
>> LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1,
>> Latency L0 <512ns, L1 <4us
>> ClockPM- Suprise- LLActRep+ BwNot-
>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
>> CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
>> DLActive+ BWMgmt- ABWMgmt-
>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
>> Surpise-
>> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
>> HPIrq- LinkChg-
>> Control: AttnInd Off, PwrInd On, Power- Interlock-
>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
>> Interlock-
>> Changed: MRL- PresDet+ LinkState+
>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna-
>> CRSVisible-
>> RootCap: CRSVisible-
>> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>> Capabilities: [100] Virtual Channel <?>
>> Capabilities: [160] Advanced Error Reporting <?>
>> Kernel driver in use: pcieport-driver
>> Kernel modules: shpchp
>> 00: de 10 78 03 07 05 10 00 a3 00 04 06 10 00 01 00
>> 10: 00 00 00 00 00 00 00 00 40 6b 6b 00 11 11 00 20
>> 20: f0 fc f0 fc f1 ff 01 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
>> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
>> 50: 05 60 83 00 0c f0 ef fe 00 00 00 00 59 41 00 00
>> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 10 00 41 01 01 80 00 00 10 28 01 00 41 3c 11 02
>> 90: 00 00 41 30 00 00 00 00 c0 01 48 01 04 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 0001:6b:00.0 SCSI storage controller [0100]: LSI Logic / Symbios
>> Logic SAS1068E PCI-Express Fusion-MPT SAS [1000:0058] (rev 08)
>> Subsystem: Hewlett-Packard Company Device [103c:12fe]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Interrupt: pin A routed to IRQ 43
>> Region 0: I/O ports at 1000 [disabled] [size=256]
>> Region 1: Memory at <unassigned> (64-bit, non-prefetchable)
>> [disabled]
>> Region 3: Memory at <unassigned> (64-bit, non-prefetchable)
>> [disabled]
>> [virtual] Expansion ROM at fcf00000 [disabled] [size=1M]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [68] Express (v1) Endpoint, MSI 00
>> DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s
>> <64ns, L1 <1us
>> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
>> Unsupported-
>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>> MaxPayload 128 bytes, MaxReadReq 512 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
>> TransPend-
>> LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1,
>> Latency L0 <64ns, L1 <1us
>> ClockPM- Suprise- LLActRep- BwNot-
>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
>> CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
>> DLActive- BWMgmt- ABWMgmt-
>> Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/0 Enable-
>> Address: 0000000000000000 Data: 0000
>> Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
>> Vector table: BAR=1 offset=00002000
>> PBA: BAR=1 offset=00003000
>> Capabilities: [100] Advanced Error Reporting <?>
>> Kernel modules: mptsas
>> 00: 00 10 58 00 00 00 10 00 08 00 00 01 00 00 00 00
>> 10: 01 00 00 00 04 00 00 00 00 00 00 00 04 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
>> 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 01 00 00
>> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 50: 01 68 02 06 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 00 00 00 00 00 00 00 00 10 98 01 00 25 00 00 00
>> 70: 10 28 00 00 81 0c 00 00 00 00 41 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 05 b0 80 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 11 00 00 00 01 20 00 00 01 30 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>> Windows 7 : Trouvez le PC qui vous convient! Découvrez notre offre !
>> <http://clk.atdmt.com/FRM/go/181574577/direct/01/>
>>
>>
>> _______________________________________________
>> flashrom mailing list
>> flashrom at flashrom.org
>> http://www.flashrom.org/mailman/listinfo/flashrom
>
> dump.txt
>
>
> flashrom v0.9.1-r877
> No coreboot table found.
> DMI string 0: "Tyan Computer Corporation "
> DMI string 1: "MCP55 "
> DMI string 2: "REFERENCE"
> DMI string 3: "Tyan Computer Corporation "
> DMI string 4: "S2915 "
> DMI string 5: "REFERENCE"
> Found chipset "NVIDIA MCP55", enabling flash write... OK.
> This chipset supports the following protocols: Non-SPI.
> Calibrating delay loop... 554M loops per second, 100 myus = 202 us. OK.
> Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x5b, id2 0xfb
> Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
> Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
> Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x5b, id2 0xfb
> Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x5b, id2 0xfb
> Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0x4e, id2 0x41
> Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm29F002T, 256 KB: probe_29f040b: id1 0x5d, id2 0x58
> Probing for PMC Pm29F002B, 256 KB: probe_29f040b: id1 0x5d, id2 0x58
> Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x4e, id2 0x41
> Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x0d, id2 0xd6, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x4e, id2 0x41
> Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
> Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x5d, id2 0x58
> Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50LPW116, 2048 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip.
> Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> No EEPROM/flash device found.
> If you know which flash chip you have, and if this version of flashrom
> supports a similar flash chip, you can try to force read your chip. Run:
> flashrom -f -r -c similar_supported_flash_chip filename
>
> Note: flashrom can never write when the flash chip isn't found automatically.
> 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0
> Capabilities: [44] HyperTransport: Slave or Primary Interface
> Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
> Link Control 0: CFlE+ CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Link Control 1: CFlE- CST- CFE-<LkFail+ Init- EOC+ TXO+<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 1.03
> Link Frequency 0: 1.0GHz
> Link Error 0:<Prot-<Ovfl-<EOC- CTLTm-
> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
> Link Frequency 1: 200MHz
> Link Error 1:<Prot-<Ovfl-<EOC- CTLTm-
> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
> Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> 00: de 10 69 03 06 00 b0 00 a2 00 00 05 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
> 40: f1 10 15 29 08 dc e0 01 22 20 11 11 d0 00 00 00
> 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 0a 00
> 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
> 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
> 90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
> c0: 02 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
> e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0364] (rev a3)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0
> Region 0: I/O ports at 1c00 [size=128]
> 00: de 10 64 03 0f 00 a0 00 a3 00 01 06 00 00 80 00
> 10: 01 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: f1 10 15 29 00 00 d0 fe fa 3e ff 00 fa 3e ff 00
> 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
> 70: 10 00 ff ff c5 80 00 00 00 00 44 19 0d 40 20 10
> 80: 09 20 00 8c 1d 83 00 60 f0 00 00 00 ff 00 00 00
> 90: 00 08 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
> a0: 03 00 10 11 05 43 00 00 00 06 8f 06 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 44 00 00 fe fd 03 00 a0
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Interrupt: pin A routed to IRQ 255
> Region 0: I/O ports at 3000 [size=64]
> Region 4: I/O ports at 3440 [size=64]
> Region 5: I/O ports at 3400 [size=64]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: nForce2_smbus
> 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
> 10: 01 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 41 34 00 00 01 34 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
> 40: f1 10 15 29 01 00 02 c0 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 00 00
> 70: 01 00 00 00 00 00 04 a0 00 00 00 00 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 64 15 05 00 a5 03 50 07 80 30 80 00 77 44 44 11
> f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
>
> 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10 [OHCI])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 21
> Region 0: Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ohci_hcd
> 00: de 10 6c 03 07 00 b0 00 a1 10 03 0c 00 00 80 00
> 10: 00 40 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01
> 40: f1 10 15 29 01 00 02 fe 00 00 00 00 00 00 00 00
> 50: 04 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20 [EHCI])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin B routed to IRQ 22
> Region 0: Memory at a0005000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [44] Debug port: BAR=1 offset=0098
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
> Kernel driver in use: ehci_hcd
> 00: de 10 6d 03 06 00 b0 00 a2 20 03 0c 00 00 80 00
> 10: 00 50 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 03 01
> 40: f1 10 15 29 0a 80 98 20 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
> 70: 00 00 08 00 00 10 20 80 89 3d b6 22 77 25 f4 00
> 80: 01 00 02 fe 00 80 00 00 00 00 00 00 15 16 00 00
> 90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 01 00 00 01 00 00 08 80 00 00 00 00 00 00 00 00
> b0: 00 11 22 33 44 00 00 00 ff 03 00 00 00 00 00 00
> c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
> Region 4: I/O ports at 3480 [size=16]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pata_amd
> 00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 81 34 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
> 40: f1 10 15 29 01 00 02 00 00 00 00 00 00 00 00 00
> 50: 02 f0 00 00 00 00 00 00 99 99 99 20 2a 00 a8 20
> 60: 00 00 00 c5 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 c0 34 33 00 00 04 1c 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 12 00 00 00 00 00 00 00
>
> 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 20
> Region 0: I/O ports at 34d0 [size=8]
> Region 1: I/O ports at 34c4 [size=4]
> Region 2: I/O ports at 34c8 [size=8]
> Region 3: I/O ports at 34c0 [size=4]
> Region 4: I/O ports at 3490 [size=16]
> Region 5: Memory at a0006000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: d1 34 00 00 c5 34 00 00 c9 34 00 00 c1 34 00 00
> 20: 91 34 00 00 00 60 00 a0 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 07 01 03 01
> 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 fe ff ff ff 00 00 ce 23 ff df ef ff
> 90: 00 00 ff 3f 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 23 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 0f 00 20 00
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 01 24 e0 00
> f0: 00 00 00 00 00 00 00 00 02 00 0c 00 00 00 00 00
>
> 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin B routed to IRQ 19
> Region 0: I/O ports at 34e8 [size=8]
> Region 1: I/O ports at 34dc [size=4]
> Region 2: I/O ports at 34e0 [size=8]
> Region 3: I/O ports at 34d8 [size=4]
> Region 4: I/O ports at 34a0 [size=16]
> Region 5: Memory at a0007000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: e9 34 00 00 dd 34 00 00 e1 34 00 00 d9 34 00 00
> 20: a1 34 00 00 00 70 00 a0 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01
> 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 ef ff ff ff 00 00 05 12 bf ff ff fd
> 90: 00 00 bb 34 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 80 00
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 80 07
> f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00
>
> 00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin C routed to IRQ 18
> Region 0: I/O ports at 3800 [size=8]
> Region 1: I/O ports at 34f4 [size=4]
> Region 2: I/O ports at 34f8 [size=8]
> Region 3: I/O ports at 34f0 [size=4]
> Region 4: I/O ports at 34b0 [size=16]
> Region 5: Memory at a0008000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: 01 38 00 00 f5 34 00 00 f9 34 00 00 f1 34 00 00
> 20: b1 34 00 00 00 80 00 a0 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 03 01
> 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 fb ff ff ed 00 00 bf 0e bf ff 67 ff
> 90: 00 00 45 29 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 a0 07
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 90 02
> f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00
>
> 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: a0100000-a01fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort-<SERR-<PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
> PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
> Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
> Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
> Mapping Address Base: 00000000fee00000
> 00: de 10 70 03 07 00 b0 00 a2 01 04 06 00 00 81 00
> 10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 80 02
> 20: 10 a0 10 a0 f0 ff 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 04 0a
> 40: 00 00 33 07 01 00 02 00 05 00 00 00 00 00 44 00
> 50: 00 00 fe 8f 00 00 00 00 ff 1f ff 1f 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 fe 6f 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 a8
> 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb
> c0: de 10 84 cb 07 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0 (500ns min, 1250ns max)
> Interrupt: pin B routed to IRQ 20
> Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: HDA Intel
> 00: de 10 71 03 06 00 b0 00 a2 00 03 04 00 00 80 00
> 10: 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 02 05
> 40: f1 10 15 29 01 50 02 c0 00 00 00 00 01 01 0f 00
> 50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 03 a8
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 47 00 29 00 00 00 00 00 00
>
> 00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0 (250ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 52
> Region 0: Memory at a0009000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 3808 [size=8]
> Region 2: Memory at a0005800 (32-bit, non-prefetchable) [size=256]
> Region 3: Memory at a0005400 (32-bit, non-prefetchable) [size=16]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
> Capabilities: [70] MSI-X: Enable- Count=8 Masked-
> Vector table: BAR=2 offset=00000000
> PBA: BAR=3 offset=00000000
> Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
> Address: 00000000fee0f00c Data: 41b1
> Masking: 000000fe Pending: 00000000
> Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: forcedeth
> 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
> 10: 00 90 00 a0 09 38 00 00 00 58 00 a0 00 54 00 a0
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 01 14
> 40: f1 10 15 29 01 70 02 fe 00 01 00 00 0c 00 00 00
> 50: 05 6c 87 01 0c f0 e0 fe 00 00 00 00 b1 41 00 00
> 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8
> 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 11 00 00 00 42 01 00 00 00 00 00 00
>
> 00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0 (250ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 53
> Region 0: Memory at a000b000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 3810 [size=8]
> Region 2: Memory at a000a000 (32-bit, non-prefetchable) [size=256]
> Region 3: Memory at a0005c00 (32-bit, non-prefetchable) [size=16]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
> Capabilities: [70] MSI-X: Enable- Count=8 Masked-
> Vector table: BAR=2 offset=00000000
> PBA: BAR=3 offset=00000000
> Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
> Address: 00000000fee0f00c Data: 41b9
> Masking: 000000fe Pending: 00000000
> Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: forcedeth
> 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
> 10: 00 b0 00 a0 11 38 00 00 00 a0 00 a0 00 5c 00 a0
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14
> 40: f1 10 15 29 01 70 02 fe 00 01 00 00 0c 00 00 00
> 50: 05 6c 87 01 0c f0 e0 fe 00 00 00 00 b9 41 00 00
> 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8
> 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 11 00 00 00 42 01 00 00 00 00 00 00
>
> 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: a0200000-a03fffff
> Prefetchable memory behind bridge: 00000000a4000000-00000000a5ffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
> Address: 00000000fee0f00c Data: 4151
> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0<512ns, L1<4us
> ClockPM- Surprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [100] Virtual Channel<?>
> Capabilities: [160] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Kernel driver in use: pcieport-driver
> 00: de 10 78 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 02 04 00 41 41 00 00
> 20: 20 a0 30 a0 01 a4 f1 a5 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 51 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
> 90: 00 00 41 30 00 00 00 00 c0 01 48 01 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
> I/O behind bridge: 00005000-00005fff
> Memory behind bridge: a1000000-a2ffffff
> Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort->Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
> Address: 00000000fee0f00c Data: 4159
> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0<512ns, L1<4us
> ClockPM- Surprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [100] Virtual Channel<?>
> Capabilities: [160] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Kernel driver in use: pcieport-driver
> 00: de 10 77 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 05 05 00 51 51 00 00
> 20: 00 a1 f0 a2 01 b0 f1 bf 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 0c 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 59 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 01 3d 11 00
> 90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-<EOCErr- DUL-
> Link Control: CFlE- CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 1.0GHz
> Link Error:<Prot-<Ovfl-<EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
> Capabilities: [a0] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-<EOCErr- DUL-
> Link Control: CFlE- CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 1.0GHz
> Link Error:<Prot-<Ovfl-<EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
> Capabilities: [c0] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-<EOCErr- DUL-
> Link Control: CFlE- CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 1.0GHz
> Link Error:<Prot-<Ovfl-<EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
> 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 01 03 00 02 04 01 00 01 01 01 00 01 01 01 00
> 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
> 60: 10 00 03 00 e4 02 00 00 20 c8 0e 0f 30 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> 90: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> b0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> d0: 69 01 61 01 00 00 7f 00 07 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 03 00 00 00 00 00 6f 01 00 00 00 00 01 00 00 00
> 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
> 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
> 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
> 80: 03 00 a0 00 20 ff bf 00 00 00 00 00 00 00 00 00
> 90: 03 00 c0 00 01 ff df 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 03 0a 00 00 20 0b 00 00
> b0: 03 00 e0 00 a0 ff e7 00 03 00 e8 00 81 ff ef 00
> c0: 33 10 00 00 20 50 00 00 03 60 00 00 01 60 00 00
> d0: 00 00 00 00 00 00 00 00 03 f0 00 00 01 f0 00 00
> e0: 03 02 00 7f 13 00 80 ff 00 00 00 00 00 00 00 00
> f0: 01 70 00 90 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 00 00 00 01 01 00 00 01 02 00 00 01 03 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: e0 3c f8 00 e0 3c f8 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
> 80: 22 00 00 00 00 00 00 00 24 a2 68 cf 20 13 92 00
> 90: 10 08 08 00 5a 90 40 64 39 00 00 80 00 00 00 00
> a0: 49 03 00 cf 00 00 00 00 00 00 00 00 00 00 00 00
> b0: fb 9d eb cc 89 00 00 00 68 1c 1f e8 3f c0 e7 ff
> c0: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 3f 4c 9f 36 1c bd 36 8b fd 8e ce 1e 2f 9e 6e b4
> e0: 15 6e 8f 90 86 9d 96 81 7f ce 4e 9e 3f bb 2f 94
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Capabilities: [f0] Secure device<?>
> Kernel driver in use: k8temp
> 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
> 40: ff 3b 04 00 40 00 d0 0a 00 00 00 00 00 00 00 00
> 50: 08 12 f0 71 e9 00 00 00 00 00 00 00 00 26 00 00
> 60: 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00
> 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
> 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00
> 90: 06 00 00 00 48 00 00 00 10 d4 fa df 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 0f 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 07 a7 e2 04 10 27 c0 20 26 26 25 00
> e0: 00 00 00 00 24 18 5d 00 1b 17 00 00 00 00 00 00
> f0: 0f 00 10 00 00 04 00 00 02 00 00 00 12 0f 04 00
>
> 00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-<EOCErr- DUL-
> Link Control: CFlE- CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 1.0GHz
> Link Error:<Prot-<Ovfl-<EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
> Capabilities: [a0] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-<EOCErr- DUL-
> Link Control: CFlE- CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 1.0GHz
> Link Error:<Prot-<Ovfl-<EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
> Capabilities: [c0] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-<EOCErr- DUL-
> Link Control: CFlE- CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 1.0GHz
> Link Error:<Prot-<Ovfl-<EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
> 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> 40: 04 08 01 00 01 01 05 00 01 01 01 00 01 01 01 00
> 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
> 60: 11 00 03 00 e4 00 00 00 20 c8 0e 0f 1c 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> 90: 69 01 61 01 00 80 ff 00 07 00 00 00 00 00 00 00
> a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> b0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> d0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 03 00 00 00 00 00 6f 01 00 00 00 00 01 00 00 00
> 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
> 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
> 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
> 80: 03 00 a0 00 20 ff bf 00 00 00 00 00 00 00 00 00
> 90: 03 00 c0 00 01 ff df 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 03 0a 00 00 20 0b 00 00
> b0: 03 00 e0 00 a0 ff e7 00 03 00 e8 00 81 ff ef 00
> c0: 33 10 00 00 20 50 00 00 03 60 00 00 01 60 00 00
> d0: 00 00 00 00 00 00 00 00 03 f0 00 00 01 f0 00 00
> e0: 03 02 00 7f 13 00 80 ff 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 00
> 90: 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 96 8a bb cd 1f 00 00 00 01 1e 0f 08 bd 50 76 57
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 1d 7b 36 67 30 87 df 7e 02 18 72 9f 8c 39 fd 74
> e0: 0d 17 3e a3 1a c3 ff 36 c1 5c 38 df cc 19 dd 72
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Capabilities: [f0] Secure device<?>
> Kernel driver in use: k8temp
> 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
> 40: ff 3b 04 00 40 00 50 0a 00 00 00 00 00 00 00 00
> 50: 00 d0 01 c8 c7 00 00 00 00 00 00 00 00 00 00 84
> 60: 20 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00
> 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
> 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00
> 90: 06 00 00 00 48 00 00 00 80 fe ff fb 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 07 a7 e2 04 10 27 c0 20 25 26 26 00
> e0: 00 00 00 00 24 18 58 00 1b 17 00 00 00 00 00 00
> f0: 0f 00 10 00 00 00 00 00 00 00 00 00 12 0f 04 00
>
> 01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 21
> Region 0: Memory at a0104000 (32-bit, non-prefetchable) [size=2K]
> Region 1: Memory at a0100000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
> Kernel driver in use: ohci1394
> 00: 4c 10 23 80 16 00 10 02 00 10 00 0c 10 40 00 00
> 10: 00 40 10 a0 00 00 10 a0 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04
> 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
> f0: 10 00 00 00 82 10 00 00 f1 10 15 29 00 00 00 00
>
> 02:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=02, secondary=03, subordinate=03, sec-latency=68
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: a0300000-a03fffff
> Prefetchable memory behind bridge: 00000000a4000000-00000000a5ffffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow>TAbort-<TAbort-<MAbort-<SERR-<PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0<4us, L1<16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
> Capabilities: [54] PCI-X bridge device
> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
> Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
> Upstream: Capacity=32 CommitmentLimit=32
> Downstream: Capacity=16 CommitmentLimit=16
> Capabilities: [64] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [100] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
> 10: 00 00 00 00 00 00 00 00 02 03 03 44 41 41 20 04
> 20: 30 a0 30 a0 01 a4 f1 a5 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 10 54 71 00 01 00 00 00 00 20 0a 00 81 6c 02 00
> 50: 00 00 41 00 07 64 c3 00 00 02 00 00 20 00 20 00
> 60: 10 00 10 00 01 00 42 da 00 00 c0 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 1f 3f 00 00 00 00
> 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 02:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Region 0: Memory at a0200000 (64-bit, non-prefetchable) [size=128]
> Bus: primary=02, secondary=04, subordinate=04, sec-latency=4
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow>TAbort-<TAbort-<MAbort+<SERR-<PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0<4us, L1<16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
> Capabilities: [54] PCI-X bridge device
> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
> Status: Dev=02:00.1 64bit- 133MHz- SCD- USC- SCO- SRD-
> Upstream: Capacity=32 CommitmentLimit=32
> Downstream: Capacity=16 CommitmentLimit=16
> Capabilities: [64] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [6c] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [7c] Hot-plug capable
> Capabilities: [100] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
> 10: 04 00 20 a0 00 00 00 00 02 04 04 04 f1 01 20 24
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 00
> 40: 10 54 71 00 01 00 00 00 00 20 00 00 81 6c 02 00
> 50: 00 00 41 00 07 64 03 00 01 02 00 00 20 00 20 00
> 60: 10 00 10 00 01 6c 42 da 00 00 c0 00 05 7c 80 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 03:09.0 RAID bus controller [0104]: 3ware Inc 9550SX SATA-II RAID PCI-X [13c1:1003]
> Subsystem: 3ware Inc 9550SX SATA-II RAID PCI-X [13c1:1003]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 64 (16000ns min), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at a4000000 (64-bit, prefetchable) [size=32M]
> Region 2: Memory at a0300000 (64-bit, non-prefetchable) [size=4K]
> Region 4: I/O ports at 4000 [size=64]
> [virtual] Expansion ROM at a0320000 [disabled] [size=128K]
> Capabilities: [e0] PCI-X non-bridge device
> Command: DPERE- ERO+ RBC=512 OST=3
> Status: Dev=03:09.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=3 DMCRS=16 RSCEM- 266MHz- 533MHz-
> Capabilities: [e8] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [f0] MSI: Enable- Count=1/8 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Kernel driver in use: 3w-9xxx
> 00: c1 13 03 10 17 00 b0 02 00 00 04 01 10 40 00 00
> 10: 0c 00 00 a4 00 00 00 00 04 00 30 a0 00 00 00 00
> 20: 01 40 00 00 00 00 00 00 00 00 00 00 c1 13 03 10
> 30: 00 00 00 00 e0 00 00 00 00 00 00 00 0a 01 40 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 82
> 50: 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 07 e8 22 00 48 03 03 05 01 f0 02 06 00 00 00 00
> f0: 05 00 86 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 05:00.0 VGA compatible controller [0300]: nVidia Corporation G73 [GeForce 7600 GT] [10de:0391] (rev a1) (prog-if 00 [VGA controller])
> Subsystem: ASUSTeK Computer Inc. Device [1043:81f7]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at a2000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
> Region 3: Memory at a1000000 (64-bit, non-prefetchable) [size=16M]
> Region 5: I/O ports at 5000 [size=128]
> Expansion ROM at<unassigned> [disabled]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [78] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s<1us, L1<4us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0<1us, L1<4us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Virtual Channel<?>
> Capabilities: [128] Power Budgeting<?>
> Kernel driver in use: nvidia
> 00: de 10 91 03 07 00 10 00 a1 00 00 03 00 00 00 00
> 10: 00 00 00 a2 0c 00 00 b0 00 00 00 00 04 00 00 a1
> 20: 00 00 00 00 01 50 00 00 00 00 00 00 43 10 f7 81
> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
> 60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 10 00 01 00 00 05 00 00
> 80: 10 28 00 00 01 4d 01 00 08 00 01 11 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 80:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0
> Capabilities: [44] HyperTransport: Slave or Primary Interface
> Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
> Link Control 0: CFlE+ CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Link Control 1: CFlE- CST- CFE-<LkFail+ Init- EOC+ TXO+<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 1.03
> Link Frequency 0: 1.0GHz
> Link Error 0:<Prot-<Ovfl-<EOC- CTLTm-
> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
> Link Frequency 1: 200MHz
> Link Error 1:<Prot-<Ovfl-<EOC- CTLTm-
> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
> Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> 00: de 10 69 03 06 00 b0 00 a2 00 00 05 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
> 40: f1 10 15 29 08 dc e0 01 22 20 11 11 d0 00 00 00
> 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 0a 00
> 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
> 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
> 90: 70 00 80 80 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
> e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 80:01.0 RAM memory [0500]: nVidia Corporation MCP55 LPC Bridge [10de:0361] (rev a3)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0
> Region 0: I/O ports at 2c00 [size=128]
> Region 1: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
> 00: de 10 61 03 0f 00 a0 00 a3 00 00 05 00 00 80 00
> 10: 01 2c 00 00 00 00 00 c0 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
> 40: f1 10 15 29 00 00 00 00 fa 3e ff 00 fa 3e ff 00
> 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 f9 ff
> 70: 10 00 ff ff 43 00 00 00 00 00 42 20 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 ff 00 00 01 ff 00 00 00
> 90: ff 7f 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 80:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
> Subsystem: Tyan Computer Device [10f1:2915]
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Interrupt: pin A routed to IRQ 255
> Region 0: I/O ports at 6000 [size=64]
> Region 4: I/O ports at 6440 [size=64]
> Region 5: I/O ports at 6400 [size=64]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: nForce2_smbus
> 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
> 10: 01 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 41 64 00 00 01 64 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
> 40: f1 10 15 29 01 00 02 c0 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 01 f0 00 00 01 f4 00 00 01 f8 00 00 00 00 00 00
> 70: 01 00 00 00 00 00 04 c0 00 00 00 00 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: e6 16 05 00 a5 03 50 07 80 ff f7 00 61 44 44 11
> f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
>
> 80:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=80, secondary=81, subordinate=81, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
> Address: 00000000fee0f00c Data: 4161
> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0<512ns, L1<4us
> ClockPM- Surprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Kernel driver in use: pcieport-driver
> 00: de 10 78 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 80 81 81 00 f1 01 00 00
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 61 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
> 90: 00 00 41 10 00 00 00 00 c0 01 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 80:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=80, secondary=82, subordinate=82, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c1000000-c2ffffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
> Address: 00000000fee0f00c Data: 4169
> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0<512ns, L1<4us
> ClockPM- Surprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Kernel driver in use: pcieport-driver
> 00: de 10 77 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 80 82 82 00 f1 01 00 00
> 20: 00 c1 f0 c2 01 d0 f1 df 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 69 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 01 3d 11 00
> 90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 82:00.0 VGA compatible controller [0300]: nVidia Corporation NV38GL [Quadro FX 1300] [10de:00fe] (rev a2) (prog-if 00 [VGA controller])
> Subsystem: nVidia Corporation Device [10de:0238]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at c2000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M]
> Region 2: Memory at c1000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [78] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s<512ns, L1<4us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0<2us, L1<16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> 00: de 10 fe 00 07 00 10 00 a2 00 00 03 10 00 00 00
> 10: 00 00 00 c2 08 00 00 d0 00 00 00 c1 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 38 02
> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
> 60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 10 00 11 00 c0 04 00 00
> 80: 10 28 00 00 01 55 02 00 08 00 01 11 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 0c 08 40 c1 01 04 40 c1
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>
> superiotool.txt
>
>
> superiotool r
> Probing for ALi Super I/O at 0x3f0...
> Failed. Returned data: id=0x0000, rev=0x00
> Probing for ALi Super I/O at 0x370...
> Failed. Returned data: id=0xffff, rev=0xff
> Probing for Fintek Super I/O at 0x2e...
> Failed. Returned data: vid=0xffff, id=0xffff
> Probing for Fintek Super I/O at 0x4e...
> Failed. Returned data: vid=0xffff, id=0xffff
> Probing for ITE Super I/O (init=standard) at 0x2e...
> Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=it8761e) at 0x2e...
> Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=it8228e) at 0x2e...
> Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
> Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=standard) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8761e) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8228e) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for NSC Super I/O at 0x2e...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x4e...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x15c...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
> Found SMSC SCH5307 (id=0x81, rev=0x00) at 0x2e
> No dump available for this Super I/O
> No extra registers known for this chip.
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
> Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
> Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
> Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x3f0...
> Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x89) at 0x3f0...
> Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
> Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
> Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x88) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>
>
>
> _______________________________________________
> flashrom mailing list
> flashrom at flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom
>
More information about the flashrom
mailing list